/**************************************************************************** * range_cal.c * * Copyright (C) 2012 Nils Wenzler. All rights reserved. * Authors: Nils Wenzler * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include "calibration.h" /**************************************************************************** * Defines ****************************************************************************/ /**************************************************************************** * Private Data ****************************************************************************/ //Store the values here before writing them to global_data_rc_channels uint16_t max_values[NR_CHANNELS]; uint16_t min_values[NR_CHANNELS]; uint16_t mid_values[NR_CHANNELS]; /**************************************************************************** * Private Functions ****************************************************************************/ /**This sets the middle values */ uint8_t set_mid(void) { if (0 == global_data_trylock(&global_data_rc_channels->access_conf)) { uint8_t i; for (i = 0; i < NR_CHANNELS; i++) { if (i == global_data_rc_channels->function[ROLL] || i == global_data_rc_channels->function[YAW] || i == global_data_rc_channels->function[PITCH]) { mid_values[i] = global_data_rc_channels->chan[i].raw; } else { mid_values[i] = (max_values[i] + min_values[i]) / 2; } } global_data_unlock(&global_data_rc_channels->access_conf); return 0; } else return -1; } /**This gets all current values and writes them to min or max */ uint8_t get_value(void) { if (0 == global_data_trylock(&global_data_rc_channels->access_conf)) { uint8_t i; for (i = 0; i < NR_CHANNELS; i++) { //see if the value is bigger or smaller than 1500 (roughly neutral) //and write to the appropriate array if (global_data_rc_channels->chan[i].raw != 0 && global_data_rc_channels->chan[i].raw < 1500) { min_values[i] = global_data_rc_channels->chan[i].raw; } else if (global_data_rc_channels->chan[i].raw != 0 && global_data_rc_channels->chan[i].raw > 1500) { max_values[i] = global_data_rc_channels->chan[i].raw; } else { max_values[i] = 0; min_values[i] = 0; } } global_data_unlock(&global_data_rc_channels->access_conf); return 0; } else return -1; } void write_data(void) { // global_data_lock(&global_data_rc_channels->access_conf); // uint8_t i; // for(i=0; i < NR_CHANNELS; i++){ // //Write the data to global_data_rc_channels (if not 0) // if(mid_values[i]!=0 && min_values[i]!=0 && max_values[i]!=0){ // global_data_rc_channels->chan[i].scaling_factor = // 10000/((max_values[i] - min_values[i])/2); // // global_data_rc_channels->chan[i].mid = mid_values[i]; // } // // printf("Channel %i\t Function %s \t\t Min %i\t\t Max %i\t\t Scaling Factor: %i\t Middle Value %i\n", // i, // global_data_rc_channels->function_name[global_data_rc_channels->function[i]], // min_values[i], max_values[i], // global_data_rc_channels->chan[i].scaling_factor, // global_data_rc_channels->chan[i].mid); // } // global_data_unlock(&global_data_rc_channels->access_conf); //Write to the Parameter storage global_data_parameter_storage->pm.param_values[PARAM_RC1_MIN] = min_values[0]; global_data_parameter_storage->pm.param_values[PARAM_RC2_MIN] = min_values[1]; global_data_parameter_storage->pm.param_values[PARAM_RC3_MIN] = min_values[2]; global_data_parameter_storage->pm.param_values[PARAM_RC4_MIN] = min_values[3]; global_data_parameter_storage->pm.param_values[PARAM_RC5_MIN] = min_values[4]; global_data_parameter_storage->pm.param_values[PARAM_RC6_MIN] = min_values[5]; global_data_parameter_storage->pm.param_values[PARAM_RC7_MIN] = min_values[6]; global_data_parameter_storage->pm.param_values[PARAM_RC8_MIN] = min_values[7]; global_data_parameter_storage->pm.param_values[PARAM_RC1_MAX] = max_values[0]; global_data_parameter_storage->pm.param_values[PARAM_RC2_MAX] = max_values[1]; global_data_parameter_storage->pm.param_values[PARAM_RC3_MAX] = max_values[2]; global_data_parameter_storage->pm.param_values[PARAM_RC4_MAX] = max_values[3]; global_data_parameter_storage->pm.param_values[PARAM_RC5_MAX] = max_values[4]; global_data_parameter_storage->pm.param_values[PARAM_RC6_MAX] = max_values[5]; global_data_parameter_storage->pm.param_values[PARAM_RC7_MAX] = max_values[6]; global_data_parameter_storage->pm.param_values[PARAM_RC8_MAX] = max_values[7]; global_data_parameter_storage->pm.param_values[PARAM_RC1_TRIM] = mid_values[0]; global_data_parameter_storage->pm.param_values[PARAM_RC2_TRIM] = mid_values[1]; global_data_parameter_storage->pm.param_values[PARAM_RC3_TRIM] = mid_values[2]; global_data_parameter_storage->pm.param_values[PARAM_RC4_TRIM] = mid_values[3]; global_data_parameter_storage->pm.param_values[PARAM_RC5_TRIM] = mid_values[4]; global_data_parameter_storage->pm.param_values[PARAM_RC6_TRIM] = mid_values[5]; global_data_parameter_storage->pm.param_values[PARAM_RC7_TRIM] = mid_values[6]; global_data_parameter_storage->pm.param_values[PARAM_RC8_TRIM] = mid_values[7]; usleep(3e6); uint8_t i; for (i = 0; i < NR_CHANNELS; i++) { printf("Channel %i:\t\t Min %i\t\t Max %i\t\t Scaling Factor: %i\t Middle Value %i\n", i, min_values[i], max_values[i], global_data_rc_channels->chan[i].scaling_factor, global_data_rc_channels->chan[i].mid); } } /**************************************************************************** * Public Functions ****************************************************************************/ int range_cal(int argc, char *argv[]) { printf("The range calibration routine assumes you already did the channel\n"); printf("assignment\n"); printf("This routine chooses the minimum, maximum and middle\n"); printf("value for each channel separatly. The ROLL, PITCH and YAW function\n"); printf("get their middle value from the RC direct, for the rest it is\n"); printf("calculated out of the min and max values.\n"); press_enter(); printf("Hold both sticks in lower left corner and continue\n "); press_enter(); usleep(500000); while (get_value()); printf("Hold both sticks in upper right corner and continue\n"); press_enter(); usleep(500000); while (get_value()); printf("Set the trim to 0 and leave the sticks in the neutral position\n"); press_enter(); //Loop until successfull while (set_mid()); //write the values to global_data_rc_channels write_data(); return 0; }