/****************************************************************************
 *
 *   Copyright (C) 2012 PX4 Development Team. All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 * 3. Neither the name PX4 nor the names of its contributors may be
 *    used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 ****************************************************************************/

/**
 * @file px4fmu_internal.h
 *
 * PX4FMU internal definitions
 */

#pragma once

/****************************************************************************************************
 * Included Files
 ****************************************************************************************************/

#include <nuttx/config.h>
#include <nuttx/compiler.h>
#include <stdint.h>

__BEGIN_DECLS

/* these headers are not C++ safe */
#include <stm32_internal.h>

 
/****************************************************************************************************
 * Definitions
 ****************************************************************************************************/
/* Configuration ************************************************************************************/

/* PX4FMU GPIOs ***********************************************************************************/
/* LEDs */

#define GPIO_LED1		(GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN12)

/* External interrupts */

/* SPI chip selects */
#define GPIO_SPI_CS_GYRO	(GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTC|GPIO_PIN13)
#define GPIO_SPI_CS_ACCEL_MAG	(GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTC|GPIO_PIN15)
#define GPIO_SPI_CS_BARO	(GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTD|GPIO_PIN7)
#define GPIO_SPI_CS_FRAM	(GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTD|GPIO_PIN10)

/* User GPIOs
 *
 * GPIO0-5 are the PWM servo outputs.
 */
#define GPIO_GPIO0_INPUT	(GPIO_INPUT|GPIO_PULLUP|GPIO_PORTE|GPIO_PIN14)
#define GPIO_GPIO1_INPUT	(GPIO_INPUT|GPIO_PULLUP|GPIO_PORTE|GPIO_PIN13)
#define GPIO_GPIO2_INPUT	(GPIO_INPUT|GPIO_PULLUP|GPIO_PORTE|GPIO_PIN11)
#define GPIO_GPIO3_INPUT	(GPIO_INPUT|GPIO_PULLUP|GPIO_PORTE|GPIO_PIN9)
#define GPIO_GPIO4_INPUT	(GPIO_INPUT|GPIO_PULLUP|GPIO_PORTD|GPIO_PIN13)
#define GPIO_GPIO5_INPUT	(GPIO_INPUT|GPIO_PULLUP|GPIO_PORTD|GPIO_PIN14)
#define GPIO_GPIO0_OUTPUT	(GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN14)
#define GPIO_GPIO1_OUTPUT	(GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN13)
#define GPIO_GPIO2_OUTPUT	(GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN11)
#define GPIO_GPIO3_OUTPUT	(GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN9)
#define GPIO_GPIO4_OUTPUT	(GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTD|GPIO_PIN13)
#define GPIO_GPIO5_OUTPUT	(GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTD|GPIO_PIN14)

/* Power supply control and monitoring GPIOs */
#define GPIO_VDD_5V_PERIPH_EN	(GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTA|GPIO_PIN8)
#define GPIO_VDD_2V8_SENSORS_EN	(GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN3)
#define GPIO_VDD_5V_HIPOWER_OC	(GPIO_INPUT|GPIO_PULLUP|GPIO_PORTE|GPIO_PIN10)
#define GPIO_VDD_5V_PERIPH_OC	(GPIO_INPUT|GPIO_PULLUP|GPIO_PORTE|GPIO_PIN15)

/* USB OTG FS
 *
 * PA9  OTG_FS_VBUS VBUS sensing (also connected to the green LED)
 */
#define GPIO_OTGFS_VBUS (GPIO_INPUT|GPIO_FLOAT|GPIO_SPEED_100MHz|GPIO_OPENDRAIN|GPIO_PORTA|GPIO_PIN9)

/****************************************************************************************************
 * Public Types
 ****************************************************************************************************/

/****************************************************************************************************
 * Public data
 ****************************************************************************************************/

#ifndef __ASSEMBLY__

/****************************************************************************************************
 * Public Functions
 ****************************************************************************************************/

/****************************************************************************************************
 * Name: stm32_spiinitialize
 *
 * Description:
 *   Called to configure SPI chip select GPIO pins for the PX4FMU board.
 *
 ****************************************************************************************************/

extern void stm32_spiinitialize(void);

#endif /* __ASSEMBLY__ */

__END_DECLS