/****************************************************************************
 *
 *   Copyright (C) 2012 PX4 Development Team. All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 * 3. Neither the name PX4 nor the names of its contributors may be
 *    used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 ****************************************************************************/

/**
 * @file drv_accel.h
 *
 * Accelerometer driver interface.
 */

#ifndef _DRV_ACCEL_H
#define _DRV_ACCEL_H

#include <stdint.h>
#include <sys/ioctl.h>

#include "drv_sensor.h"
#include "drv_orb_dev.h"

#define ACCEL_DEVICE_PATH	"/dev/accel"

/**
 * accel report structure.  Reads from the device must be in multiples of this
 * structure.
 */
struct accel_report {
	uint64_t timestamp;
	uint64_t error_count;
	float x;		/**< acceleration in the NED X board axis in m/s^2 */
	float y;		/**< acceleration in the NED Y board axis in m/s^2 */
	float z;		/**< acceleration in the NED Z board axis in m/s^2 */
	float temperature;	/**< temperature in degrees celsius */
	float range_m_s2;	/**< range in m/s^2 (+- this value) */
	float scaling;

	int16_t x_raw;
	int16_t y_raw;
	int16_t z_raw;
	int16_t temperature_raw;
};

/** accel scaling factors; Vout = Vscale * (Vin + Voffset) */
struct accel_scale {
	float	x_offset;
	float	x_scale;
	float	y_offset;
	float	y_scale;
	float	z_offset;
	float	z_scale;
};

/*
 * ObjDev tag for raw accelerometer data.
 */
ORB_DECLARE(sensor_accel0);
ORB_DECLARE(sensor_accel1);
ORB_DECLARE(sensor_accel2);

/*
 * ioctl() definitions
 *
 * Accelerometer drivers also implement the generic sensor driver
 * interfaces from drv_sensor.h
 */

#define _ACCELIOCBASE		(0x2100)
#define _ACCELIOC(_n)		(_IOC(_ACCELIOCBASE, _n))


/** set the accel internal sample rate to at least (arg) Hz */
#define ACCELIOCSSAMPLERATE	_ACCELIOC(0)

/** return the accel internal sample rate in Hz */
#define ACCELIOCGSAMPLERATE	_ACCELIOC(1)

/** set the accel internal lowpass filter to no lower than (arg) Hz */
#define ACCELIOCSLOWPASS	_ACCELIOC(2)

/** return the accel internal lowpass filter in Hz */
#define ACCELIOCGLOWPASS	_ACCELIOC(3)

/** set the accel scaling constants to the structure pointed to by (arg) */
#define ACCELIOCSSCALE		_ACCELIOC(5)

/** get the accel scaling constants into the structure pointed to by (arg) */
#define ACCELIOCGSCALE		_ACCELIOC(6)

/** set the accel measurement range to handle at least (arg) g */
#define ACCELIOCSRANGE		_ACCELIOC(7)

/** get the current accel measurement range in g */
#define ACCELIOCGRANGE		_ACCELIOC(8)

/** get the result of a sensor self-test */
#define ACCELIOCSELFTEST	_ACCELIOC(9)

#endif /* _DRV_ACCEL_H */