1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
1241
1242
1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
1294
1295
1296
1297
1298
1299
1300
1301
1302
1303
1304
1305
1306
1307
1308
1309
1310
1311
1312
1313
1314
1315
1316
1317
1318
1319
1320
1321
1322
1323
1324
1325
1326
1327
1328
1329
1330
1331
1332
1333
1334
1335
1336
1337
1338
1339
1340
1341
1342
1343
1344
1345
1346
1347
1348
1349
1350
1351
1352
1353
1354
1355
1356
1357
1358
1359
1360
1361
1362
1363
1364
1365
1366
1367
1368
1369
1370
1371
1372
1373
1374
1375
1376
1377
1378
1379
1380
1381
1382
1383
1384
1385
1386
1387
1388
1389
1390
1391
1392
1393
1394
1395
1396
1397
1398
1399
1400
1401
1402
1403
1404
1405
1406
1407
1408
1409
1410
1411
1412
1413
1414
1415
1416
1417
1418
1419
1420
1421
1422
1423
1424
1425
1426
1427
1428
1429
1430
1431
1432
1433
1434
1435
1436
1437
1438
1439
1440
1441
1442
1443
1444
1445
1446
1447
1448
1449
1450
1451
1452
1453
1454
1455
1456
1457
1458
1459
1460
1461
1462
1463
1464
1465
1466
1467
1468
1469
1470
1471
1472
1473
1474
1475
1476
1477
1478
1479
1480
1481
1482
1483
1484
1485
1486
1487
1488
1489
1490
1491
1492
1493
1494
1495
1496
1497
1498
1499
1500
1501
1502
1503
1504
1505
1506
1507
1508
1509
1510
1511
1512
1513
1514
1515
1516
1517
1518
1519
1520
1521
1522
1523
1524
1525
1526
1527
1528
1529
1530
1531
1532
1533
1534
1535
1536
1537
1538
1539
1540
1541
1542
1543
1544
1545
1546
1547
1548
1549
1550
1551
1552
1553
1554
1555
1556
1557
1558
1559
1560
1561
1562
1563
1564
1565
1566
1567
1568
1569
1570
1571
1572
1573
1574
1575
1576
1577
1578
1579
1580
1581
1582
1583
1584
1585
1586
1587
1588
1589
1590
1591
1592
1593
1594
1595
1596
1597
1598
1599
1600
1601
1602
1603
1604
1605
1606
1607
1608
1609
1610
1611
1612
1613
1614
1615
1616
1617
1618
1619
1620
1621
1622
1623
1624
1625
1626
1627
1628
1629
1630
1631
1632
1633
1634
1635
1636
1637
1638
1639
1640
1641
1642
1643
1644
1645
1646
1647
1648
1649
1650
1651
1652
1653
1654
1655
1656
1657
1658
1659
1660
1661
1662
1663
1664
1665
1666
1667
1668
1669
1670
1671
1672
1673
1674
1675
1676
1677
1678
1679
1680
1681
1682
1683
1684
1685
1686
1687
1688
1689
1690
1691
1692
1693
1694
1695
1696
1697
1698
1699
1700
1701
1702
1703
1704
1705
1706
1707
1708
1709
1710
1711
1712
1713
1714
1715
1716
1717
1718
1719
1720
1721
1722
1723
1724
1725
1726
1727
1728
1729
1730
1731
1732
1733
1734
1735
1736
1737
1738
1739
1740
1741
1742
1743
1744
1745
1746
1747
1748
1749
1750
1751
1752
1753
1754
1755
1756
1757
1758
1759
1760
1761
1762
1763
1764
1765
1766
1767
1768
1769
1770
1771
1772
1773
1774
1775
1776
1777
1778
1779
1780
1781
1782
1783
1784
1785
1786
1787
1788
1789
1790
1791
1792
1793
1794
1795
1796
1797
1798
1799
1800
1801
1802
1803
1804
1805
1806
1807
1808
1809
1810
1811
1812
1813
1814
1815
1816
1817
1818
1819
1820
1821
1822
1823
1824
1825
1826
1827
1828
1829
1830
1831
1832
1833
1834
1835
1836
1837
1838
1839
1840
1841
1842
1843
1844
1845
1846
1847
1848
1849
1850
1851
1852
1853
1854
1855
1856
1857
1858
1859
1860
1861
1862
1863
1864
1865
1866
1867
1868
1869
1870
1871
1872
1873
1874
1875
1876
1877
1878
1879
1880
1881
1882
1883
1884
1885
1886
1887
1888
1889
1890
1891
1892
1893
1894
1895
1896
1897
1898
1899
1900
1901
1902
1903
1904
1905
1906
1907
1908
1909
1910
1911
1912
1913
1914
1915
1916
1917
1918
1919
1920
1921
1922
1923
1924
1925
1926
1927
1928
1929
1930
1931
1932
1933
1934
1935
1936
1937
1938
1939
1940
1941
1942
1943
1944
1945
1946
1947
1948
1949
1950
1951
1952
1953
1954
1955
1956
1957
1958
1959
1960
1961
1962
1963
1964
1965
1966
1967
1968
1969
1970
1971
1972
1973
1974
1975
1976
1977
1978
1979
1980
1981
1982
1983
1984
1985
1986
1987
1988
1989
1990
1991
1992
1993
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
2025
2026
2027
2028
2029
2030
2031
2032
2033
2034
2035
2036
2037
2038
2039
2040
2041
2042
2043
2044
2045
2046
2047
2048
2049
2050
2051
2052
2053
2054
2055
2056
2057
2058
2059
2060
2061
2062
2063
2064
2065
2066
2067
2068
2069
2070
2071
2072
2073
2074
2075
2076
2077
2078
2079
2080
2081
2082
2083
2084
2085
2086
2087
2088
2089
2090
2091
2092
2093
2094
2095
2096
2097
2098
2099
2100
2101
2102
2103
2104
2105
2106
2107
2108
2109
2110
2111
2112
2113
2114
2115
2116
2117
2118
2119
2120
2121
2122
2123
2124
2125
2126
2127
2128
2129
2130
2131
2132
2133
2134
2135
2136
|
/****************************************************************************
*
* Copyright (c) 2013-2015 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/**
* @file lsm303d.cpp
* Driver for the ST LSM303D MEMS accelerometer / magnetometer connected via SPI.
*/
#include <nuttx/config.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <stdint.h>
#include <stdbool.h>
#include <stddef.h>
#include <stdlib.h>
#include <semaphore.h>
#include <string.h>
#include <fcntl.h>
#include <poll.h>
#include <errno.h>
#include <stdio.h>
#include <math.h>
#include <unistd.h>
#include <getopt.h>
#include <systemlib/perf_counter.h>
#include <systemlib/err.h>
#include <nuttx/arch.h>
#include <nuttx/clock.h>
#include <drivers/drv_hrt.h>
#include <drivers/device/spi.h>
#include <drivers/drv_accel.h>
#include <drivers/drv_mag.h>
#include <drivers/device/ringbuffer.h>
#include <drivers/drv_tone_alarm.h>
#include <board_config.h>
#include <mathlib/math/filter/LowPassFilter2p.hpp>
#include <lib/conversion/rotation.h>
/* oddly, ERROR is not defined for c++ */
#ifdef ERROR
# undef ERROR
#endif
static const int ERROR = -1;
/* SPI protocol address bits */
#define DIR_READ (1<<7)
#define DIR_WRITE (0<<7)
#define ADDR_INCREMENT (1<<6)
#define LSM303D_DEVICE_PATH_ACCEL "/dev/lsm303d_accel"
#define LSM303D_DEVICE_PATH_ACCEL_EXT "/dev/lsm303d_accel_ext"
#define LSM303D_DEVICE_PATH_MAG "/dev/lsm303d_mag"
/* register addresses: A: accel, M: mag, T: temp */
#define ADDR_WHO_AM_I 0x0F
#define WHO_I_AM 0x49
#define ADDR_OUT_TEMP_L 0x05
#define ADDR_OUT_TEMP_H 0x06
#define ADDR_STATUS_M 0x07
#define ADDR_OUT_X_L_M 0x08
#define ADDR_OUT_X_H_M 0x09
#define ADDR_OUT_Y_L_M 0x0A
#define ADDR_OUT_Y_H_M 0x0B
#define ADDR_OUT_Z_L_M 0x0C
#define ADDR_OUT_Z_H_M 0x0D
#define ADDR_INT_CTRL_M 0x12
#define ADDR_INT_SRC_M 0x13
#define ADDR_REFERENCE_X 0x1c
#define ADDR_REFERENCE_Y 0x1d
#define ADDR_REFERENCE_Z 0x1e
#define ADDR_STATUS_A 0x27
#define ADDR_OUT_X_L_A 0x28
#define ADDR_OUT_X_H_A 0x29
#define ADDR_OUT_Y_L_A 0x2A
#define ADDR_OUT_Y_H_A 0x2B
#define ADDR_OUT_Z_L_A 0x2C
#define ADDR_OUT_Z_H_A 0x2D
#define ADDR_CTRL_REG0 0x1F
#define ADDR_CTRL_REG1 0x20
#define ADDR_CTRL_REG2 0x21
#define ADDR_CTRL_REG3 0x22
#define ADDR_CTRL_REG4 0x23
#define ADDR_CTRL_REG5 0x24
#define ADDR_CTRL_REG6 0x25
#define ADDR_CTRL_REG7 0x26
#define ADDR_FIFO_CTRL 0x2e
#define ADDR_FIFO_SRC 0x2f
#define ADDR_IG_CFG1 0x30
#define ADDR_IG_SRC1 0x31
#define ADDR_IG_THS1 0x32
#define ADDR_IG_DUR1 0x33
#define ADDR_IG_CFG2 0x34
#define ADDR_IG_SRC2 0x35
#define ADDR_IG_THS2 0x36
#define ADDR_IG_DUR2 0x37
#define ADDR_CLICK_CFG 0x38
#define ADDR_CLICK_SRC 0x39
#define ADDR_CLICK_THS 0x3a
#define ADDR_TIME_LIMIT 0x3b
#define ADDR_TIME_LATENCY 0x3c
#define ADDR_TIME_WINDOW 0x3d
#define ADDR_ACT_THS 0x3e
#define ADDR_ACT_DUR 0x3f
#define REG1_RATE_BITS_A ((1<<7) | (1<<6) | (1<<5) | (1<<4))
#define REG1_POWERDOWN_A ((0<<7) | (0<<6) | (0<<5) | (0<<4))
#define REG1_RATE_3_125HZ_A ((0<<7) | (0<<6) | (0<<5) | (1<<4))
#define REG1_RATE_6_25HZ_A ((0<<7) | (0<<6) | (1<<5) | (0<<4))
#define REG1_RATE_12_5HZ_A ((0<<7) | (0<<6) | (1<<5) | (1<<4))
#define REG1_RATE_25HZ_A ((0<<7) | (1<<6) | (0<<5) | (0<<4))
#define REG1_RATE_50HZ_A ((0<<7) | (1<<6) | (0<<5) | (1<<4))
#define REG1_RATE_100HZ_A ((0<<7) | (1<<6) | (1<<5) | (0<<4))
#define REG1_RATE_200HZ_A ((0<<7) | (1<<6) | (1<<5) | (1<<4))
#define REG1_RATE_400HZ_A ((1<<7) | (0<<6) | (0<<5) | (0<<4))
#define REG1_RATE_800HZ_A ((1<<7) | (0<<6) | (0<<5) | (1<<4))
#define REG1_RATE_1600HZ_A ((1<<7) | (0<<6) | (1<<5) | (0<<4))
#define REG1_BDU_UPDATE (1<<3)
#define REG1_Z_ENABLE_A (1<<2)
#define REG1_Y_ENABLE_A (1<<1)
#define REG1_X_ENABLE_A (1<<0)
#define REG2_ANTIALIAS_FILTER_BW_BITS_A ((1<<7) | (1<<6))
#define REG2_AA_FILTER_BW_773HZ_A ((0<<7) | (0<<6))
#define REG2_AA_FILTER_BW_194HZ_A ((0<<7) | (1<<6))
#define REG2_AA_FILTER_BW_362HZ_A ((1<<7) | (0<<6))
#define REG2_AA_FILTER_BW_50HZ_A ((1<<7) | (1<<6))
#define REG2_FULL_SCALE_BITS_A ((1<<5) | (1<<4) | (1<<3))
#define REG2_FULL_SCALE_2G_A ((0<<5) | (0<<4) | (0<<3))
#define REG2_FULL_SCALE_4G_A ((0<<5) | (0<<4) | (1<<3))
#define REG2_FULL_SCALE_6G_A ((0<<5) | (1<<4) | (0<<3))
#define REG2_FULL_SCALE_8G_A ((0<<5) | (1<<4) | (1<<3))
#define REG2_FULL_SCALE_16G_A ((1<<5) | (0<<4) | (0<<3))
#define REG5_ENABLE_T (1<<7)
#define REG5_RES_HIGH_M ((1<<6) | (1<<5))
#define REG5_RES_LOW_M ((0<<6) | (0<<5))
#define REG5_RATE_BITS_M ((1<<4) | (1<<3) | (1<<2))
#define REG5_RATE_3_125HZ_M ((0<<4) | (0<<3) | (0<<2))
#define REG5_RATE_6_25HZ_M ((0<<4) | (0<<3) | (1<<2))
#define REG5_RATE_12_5HZ_M ((0<<4) | (1<<3) | (0<<2))
#define REG5_RATE_25HZ_M ((0<<4) | (1<<3) | (1<<2))
#define REG5_RATE_50HZ_M ((1<<4) | (0<<3) | (0<<2))
#define REG5_RATE_100HZ_M ((1<<4) | (0<<3) | (1<<2))
#define REG5_RATE_DO_NOT_USE_M ((1<<4) | (1<<3) | (0<<2))
#define REG6_FULL_SCALE_BITS_M ((1<<6) | (1<<5))
#define REG6_FULL_SCALE_2GA_M ((0<<6) | (0<<5))
#define REG6_FULL_SCALE_4GA_M ((0<<6) | (1<<5))
#define REG6_FULL_SCALE_8GA_M ((1<<6) | (0<<5))
#define REG6_FULL_SCALE_12GA_M ((1<<6) | (1<<5))
#define REG7_CONT_MODE_M ((0<<1) | (0<<0))
#define INT_CTRL_M 0x12
#define INT_SRC_M 0x13
/* default values for this device */
#define LSM303D_ACCEL_DEFAULT_RANGE_G 8
#define LSM303D_ACCEL_DEFAULT_RATE 800
#define LSM303D_ACCEL_DEFAULT_ONCHIP_FILTER_FREQ 50
#define LSM303D_ACCEL_DEFAULT_DRIVER_FILTER_FREQ 30
#define LSM303D_MAG_DEFAULT_RANGE_GA 2
#define LSM303D_MAG_DEFAULT_RATE 100
#define LSM303D_ONE_G 9.80665f
#ifdef PX4_SPI_BUS_EXT
#define EXTERNAL_BUS PX4_SPI_BUS_EXT
#else
#define EXTERNAL_BUS 0
#endif
extern "C" { __EXPORT int lsm303d_main(int argc, char *argv[]); }
class LSM303D_mag;
class LSM303D : public device::SPI
{
public:
LSM303D(int bus, const char* path, spi_dev_e device, enum Rotation rotation);
virtual ~LSM303D();
virtual int init();
virtual ssize_t read(struct file *filp, char *buffer, size_t buflen);
virtual int ioctl(struct file *filp, int cmd, unsigned long arg);
/**
* Diagnostics - print some basic information about the driver.
*/
void print_info();
/**
* dump register values
*/
void print_registers();
/**
* deliberately trigger an error
*/
void test_error();
protected:
virtual int probe();
friend class LSM303D_mag;
virtual ssize_t mag_read(struct file *filp, char *buffer, size_t buflen);
virtual int mag_ioctl(struct file *filp, int cmd, unsigned long arg);
private:
LSM303D_mag *_mag;
struct hrt_call _accel_call;
struct hrt_call _mag_call;
unsigned _call_accel_interval;
unsigned _call_mag_interval;
RingBuffer *_accel_reports;
RingBuffer *_mag_reports;
struct accel_scale _accel_scale;
unsigned _accel_range_m_s2;
float _accel_range_scale;
unsigned _accel_samplerate;
unsigned _accel_onchip_filter_bandwith;
struct mag_scale _mag_scale;
unsigned _mag_range_ga;
float _mag_range_scale;
unsigned _mag_samplerate;
orb_advert_t _accel_topic;
int _accel_orb_class_instance;
int _accel_class_instance;
unsigned _accel_read;
unsigned _mag_read;
perf_counter_t _accel_sample_perf;
perf_counter_t _mag_sample_perf;
perf_counter_t _accel_reschedules;
perf_counter_t _bad_registers;
perf_counter_t _bad_values;
uint8_t _register_wait;
math::LowPassFilter2p _accel_filter_x;
math::LowPassFilter2p _accel_filter_y;
math::LowPassFilter2p _accel_filter_z;
enum Rotation _rotation;
// values used to
float _last_accel[3];
uint8_t _constant_accel_count;
// last temperature value
float _last_temperature;
// this is used to support runtime checking of key
// configuration registers to detect SPI bus errors and sensor
// reset
#define LSM303D_NUM_CHECKED_REGISTERS 8
static const uint8_t _checked_registers[LSM303D_NUM_CHECKED_REGISTERS];
uint8_t _checked_values[LSM303D_NUM_CHECKED_REGISTERS];
uint8_t _checked_next;
/**
* Start automatic measurement.
*/
void start();
/**
* Stop automatic measurement.
*/
void stop();
/**
* Reset chip.
*
* Resets the chip and measurements ranges, but not scale and offset.
*/
void reset();
/**
* disable I2C on the chip
*/
void disable_i2c();
/**
* Get the internal / external state
*
* @return true if the sensor is not on the main MCU board
*/
bool is_external() { return (_bus == EXTERNAL_BUS); }
/**
* Static trampoline from the hrt_call context; because we don't have a
* generic hrt wrapper yet.
*
* Called by the HRT in interrupt context at the specified rate if
* automatic polling is enabled.
*
* @param arg Instance pointer for the driver that is polling.
*/
static void measure_trampoline(void *arg);
/**
* Static trampoline for the mag because it runs at a lower rate
*
* @param arg Instance pointer for the driver that is polling.
*/
static void mag_measure_trampoline(void *arg);
/**
* check key registers for correct values
*/
void check_registers(void);
/**
* Fetch accel measurements from the sensor and update the report ring.
*/
void measure();
/**
* Fetch mag measurements from the sensor and update the report ring.
*/
void mag_measure();
/**
* Accel self test
*
* @return 0 on success, 1 on failure
*/
int accel_self_test();
/**
* Mag self test
*
* @return 0 on success, 1 on failure
*/
int mag_self_test();
/**
* Read a register from the LSM303D
*
* @param The register to read.
* @return The value that was read.
*/
uint8_t read_reg(unsigned reg);
/**
* Write a register in the LSM303D
*
* @param reg The register to write.
* @param value The new value to write.
*/
void write_reg(unsigned reg, uint8_t value);
/**
* Modify a register in the LSM303D
*
* Bits are cleared before bits are set.
*
* @param reg The register to modify.
* @param clearbits Bits in the register to clear.
* @param setbits Bits in the register to set.
*/
void modify_reg(unsigned reg, uint8_t clearbits, uint8_t setbits);
/**
* Write a register in the LSM303D, updating _checked_values
*
* @param reg The register to write.
* @param value The new value to write.
*/
void write_checked_reg(unsigned reg, uint8_t value);
/**
* Set the LSM303D accel measurement range.
*
* @param max_g The measurement range of the accel is in g (9.81m/s^2)
* Zero selects the maximum supported range.
* @return OK if the value can be supported, -ERANGE otherwise.
*/
int accel_set_range(unsigned max_g);
/**
* Set the LSM303D mag measurement range.
*
* @param max_ga The measurement range of the mag is in Ga
* Zero selects the maximum supported range.
* @return OK if the value can be supported, -ERANGE otherwise.
*/
int mag_set_range(unsigned max_g);
/**
* Set the LSM303D on-chip anti-alias filter bandwith.
*
* @param bandwidth The anti-alias filter bandwidth in Hz
* Zero selects the highest bandwidth
* @return OK if the value can be supported, -ERANGE otherwise.
*/
int accel_set_onchip_lowpass_filter_bandwidth(unsigned bandwidth);
/**
* Set the driver lowpass filter bandwidth.
*
* @param bandwidth The anti-alias filter bandwidth in Hz
* Zero selects the highest bandwidth
* @return OK if the value can be supported, -ERANGE otherwise.
*/
int accel_set_driver_lowpass_filter(float samplerate, float bandwidth);
/**
* Set the LSM303D internal accel sampling frequency.
*
* @param frequency The internal accel sampling frequency is set to not less than
* this value.
* Zero selects the maximum rate supported.
* @return OK if the value can be supported.
*/
int accel_set_samplerate(unsigned frequency);
/**
* Set the LSM303D internal mag sampling frequency.
*
* @param frequency The internal mag sampling frequency is set to not less than
* this value.
* Zero selects the maximum rate supported.
* @return OK if the value can be supported.
*/
int mag_set_samplerate(unsigned frequency);
/* this class cannot be copied */
LSM303D(const LSM303D&);
LSM303D operator=(const LSM303D&);
};
/*
list of registers that will be checked in check_registers(). Note
that ADDR_WHO_AM_I must be first in the list.
*/
const uint8_t LSM303D::_checked_registers[LSM303D_NUM_CHECKED_REGISTERS] = { ADDR_WHO_AM_I,
ADDR_CTRL_REG1,
ADDR_CTRL_REG2,
ADDR_CTRL_REG3,
ADDR_CTRL_REG4,
ADDR_CTRL_REG5,
ADDR_CTRL_REG6,
ADDR_CTRL_REG7 };
/**
* Helper class implementing the mag driver node.
*/
class LSM303D_mag : public device::CDev
{
public:
LSM303D_mag(LSM303D *parent);
~LSM303D_mag();
virtual ssize_t read(struct file *filp, char *buffer, size_t buflen);
virtual int ioctl(struct file *filp, int cmd, unsigned long arg);
virtual int init();
protected:
friend class LSM303D;
void parent_poll_notify();
private:
LSM303D *_parent;
orb_advert_t _mag_topic;
int _mag_orb_class_instance;
int _mag_class_instance;
void measure();
void measure_trampoline(void *arg);
/* this class does not allow copying due to ptr data members */
LSM303D_mag(const LSM303D_mag&);
LSM303D_mag operator=(const LSM303D_mag&);
};
LSM303D::LSM303D(int bus, const char* path, spi_dev_e device, enum Rotation rotation) :
SPI("LSM303D", path, bus, device, SPIDEV_MODE3, 11*1000*1000 /* will be rounded to 10.4 MHz, within safety margins for LSM303D */),
_mag(new LSM303D_mag(this)),
_accel_call{},
_mag_call{},
_call_accel_interval(0),
_call_mag_interval(0),
_accel_reports(nullptr),
_mag_reports(nullptr),
_accel_scale{},
_accel_range_m_s2(0.0f),
_accel_range_scale(0.0f),
_accel_samplerate(0),
_accel_onchip_filter_bandwith(0),
_mag_scale{},
_mag_range_ga(0.0f),
_mag_range_scale(0.0f),
_mag_samplerate(0),
_accel_topic(-1),
_accel_orb_class_instance(-1),
_accel_class_instance(-1),
_accel_read(0),
_mag_read(0),
_accel_sample_perf(perf_alloc(PC_ELAPSED, "lsm303d_accel_read")),
_mag_sample_perf(perf_alloc(PC_ELAPSED, "lsm303d_mag_read")),
_accel_reschedules(perf_alloc(PC_COUNT, "lsm303d_accel_resched")),
_bad_registers(perf_alloc(PC_COUNT, "lsm303d_bad_registers")),
_bad_values(perf_alloc(PC_COUNT, "lsm303d_bad_values")),
_register_wait(0),
_accel_filter_x(LSM303D_ACCEL_DEFAULT_RATE, LSM303D_ACCEL_DEFAULT_DRIVER_FILTER_FREQ),
_accel_filter_y(LSM303D_ACCEL_DEFAULT_RATE, LSM303D_ACCEL_DEFAULT_DRIVER_FILTER_FREQ),
_accel_filter_z(LSM303D_ACCEL_DEFAULT_RATE, LSM303D_ACCEL_DEFAULT_DRIVER_FILTER_FREQ),
_rotation(rotation),
_constant_accel_count(0),
_last_temperature(0),
_checked_next(0)
{
// enable debug() calls
_debug_enabled = true;
_device_id.devid_s.devtype = DRV_ACC_DEVTYPE_LSM303D;
/* Prime _mag with parents devid. */
_mag->_device_id.devid = _device_id.devid;
_mag->_device_id.devid_s.devtype = DRV_MAG_DEVTYPE_LSM303D;
// default scale factors
_accel_scale.x_offset = 0.0f;
_accel_scale.x_scale = 1.0f;
_accel_scale.y_offset = 0.0f;
_accel_scale.y_scale = 1.0f;
_accel_scale.z_offset = 0.0f;
_accel_scale.z_scale = 1.0f;
_mag_scale.x_offset = 0.0f;
_mag_scale.x_scale = 1.0f;
_mag_scale.y_offset = 0.0f;
_mag_scale.y_scale = 1.0f;
_mag_scale.z_offset = 0.0f;
_mag_scale.z_scale = 1.0f;
}
LSM303D::~LSM303D()
{
/* make sure we are truly inactive */
stop();
/* free any existing reports */
if (_accel_reports != nullptr)
delete _accel_reports;
if (_mag_reports != nullptr)
delete _mag_reports;
if (_accel_class_instance != -1)
unregister_class_devname(ACCEL_BASE_DEVICE_PATH, _accel_class_instance);
delete _mag;
/* delete the perf counter */
perf_free(_accel_sample_perf);
perf_free(_mag_sample_perf);
perf_free(_bad_registers);
perf_free(_bad_values);
perf_free(_accel_reschedules);
}
int
LSM303D::init()
{
int ret = ERROR;
/* do SPI init (and probe) first */
if (SPI::init() != OK) {
warnx("SPI init failed");
goto out;
}
/* allocate basic report buffers */
_accel_reports = new RingBuffer(2, sizeof(accel_report));
if (_accel_reports == nullptr)
goto out;
_mag_reports = new RingBuffer(2, sizeof(mag_report));
if (_mag_reports == nullptr)
goto out;
reset();
/* do CDev init for the mag device node */
ret = _mag->init();
if (ret != OK) {
warnx("MAG init failed");
goto out;
}
/* fill report structures */
measure();
/* advertise sensor topic, measure manually to initialize valid report */
struct mag_report mrp;
_mag_reports->get(&mrp);
/* measurement will have generated a report, publish */
_mag->_mag_topic = orb_advertise_multi(ORB_ID(sensor_mag), &mrp,
&_mag->_mag_orb_class_instance, ORB_PRIO_LOW);
if (_mag->_mag_topic < 0) {
warnx("ADVERT ERR");
}
_accel_class_instance = register_class_devname(ACCEL_BASE_DEVICE_PATH);
/* advertise sensor topic, measure manually to initialize valid report */
struct accel_report arp;
_accel_reports->get(&arp);
/* measurement will have generated a report, publish */
_accel_topic = orb_advertise_multi(ORB_ID(sensor_accel), &arp,
&_accel_orb_class_instance, (is_external()) ? ORB_PRIO_VERY_HIGH : ORB_PRIO_DEFAULT);
if (_accel_topic < 0) {
warnx("ADVERT ERR");
}
out:
return ret;
}
void
LSM303D::disable_i2c(void)
{
uint8_t a = read_reg(0x02);
write_reg(0x02, (0x10 | a));
a = read_reg(0x02);
write_reg(0x02, (0xF7 & a));
a = read_reg(0x15);
write_reg(0x15, (0x80 | a));
a = read_reg(0x02);
write_reg(0x02, (0xE7 & a));
}
void
LSM303D::reset()
{
// ensure the chip doesn't interpret any other bus traffic as I2C
disable_i2c();
/* enable accel*/
write_checked_reg(ADDR_CTRL_REG1,
REG1_X_ENABLE_A | REG1_Y_ENABLE_A | REG1_Z_ENABLE_A | REG1_BDU_UPDATE | REG1_RATE_800HZ_A);
/* enable mag */
write_checked_reg(ADDR_CTRL_REG7, REG7_CONT_MODE_M);
write_checked_reg(ADDR_CTRL_REG5, REG5_RES_HIGH_M | REG5_ENABLE_T);
write_checked_reg(ADDR_CTRL_REG3, 0x04); // DRDY on ACCEL on INT1
write_checked_reg(ADDR_CTRL_REG4, 0x04); // DRDY on MAG on INT2
accel_set_range(LSM303D_ACCEL_DEFAULT_RANGE_G);
accel_set_samplerate(LSM303D_ACCEL_DEFAULT_RATE);
accel_set_driver_lowpass_filter((float)LSM303D_ACCEL_DEFAULT_RATE, (float)LSM303D_ACCEL_DEFAULT_DRIVER_FILTER_FREQ);
// we setup the anti-alias on-chip filter as 50Hz. We believe
// this operates in the analog domain, and is critical for
// anti-aliasing. The 2 pole software filter is designed to
// operate in conjunction with this on-chip filter
accel_set_onchip_lowpass_filter_bandwidth(LSM303D_ACCEL_DEFAULT_ONCHIP_FILTER_FREQ);
mag_set_range(LSM303D_MAG_DEFAULT_RANGE_GA);
mag_set_samplerate(LSM303D_MAG_DEFAULT_RATE);
_accel_read = 0;
_mag_read = 0;
}
int
LSM303D::probe()
{
/* read dummy value to void to clear SPI statemachine on sensor */
(void)read_reg(ADDR_WHO_AM_I);
/* verify that the device is attached and functioning */
bool success = (read_reg(ADDR_WHO_AM_I) == WHO_I_AM);
if (success) {
_checked_values[0] = WHO_I_AM;
return OK;
}
return -EIO;
}
ssize_t
LSM303D::read(struct file *filp, char *buffer, size_t buflen)
{
unsigned count = buflen / sizeof(struct accel_report);
accel_report *arb = reinterpret_cast<accel_report *>(buffer);
int ret = 0;
/* buffer must be large enough */
if (count < 1)
return -ENOSPC;
/* if automatic measurement is enabled */
if (_call_accel_interval > 0) {
/*
* While there is space in the caller's buffer, and reports, copy them.
*/
while (count--) {
if (_accel_reports->get(arb)) {
ret += sizeof(*arb);
arb++;
}
}
/* if there was no data, warn the caller */
return ret ? ret : -EAGAIN;
}
/* manual measurement */
measure();
/* measurement will have generated a report, copy it out */
if (_accel_reports->get(arb))
ret = sizeof(*arb);
return ret;
}
ssize_t
LSM303D::mag_read(struct file *filp, char *buffer, size_t buflen)
{
unsigned count = buflen / sizeof(struct mag_report);
mag_report *mrb = reinterpret_cast<mag_report *>(buffer);
int ret = 0;
/* buffer must be large enough */
if (count < 1)
return -ENOSPC;
/* if automatic measurement is enabled */
if (_call_mag_interval > 0) {
/*
* While there is space in the caller's buffer, and reports, copy them.
*/
while (count--) {
if (_mag_reports->get(mrb)) {
ret += sizeof(*mrb);
mrb++;
}
}
/* if there was no data, warn the caller */
return ret ? ret : -EAGAIN;
}
/* manual measurement */
_mag_reports->flush();
_mag->measure();
/* measurement will have generated a report, copy it out */
if (_mag_reports->get(mrb))
ret = sizeof(*mrb);
return ret;
}
int
LSM303D::ioctl(struct file *filp, int cmd, unsigned long arg)
{
switch (cmd) {
case SENSORIOCSPOLLRATE: {
switch (arg) {
/* switching to manual polling */
case SENSOR_POLLRATE_MANUAL:
stop();
_call_accel_interval = 0;
return OK;
/* external signalling not supported */
case SENSOR_POLLRATE_EXTERNAL:
/* zero would be bad */
case 0:
return -EINVAL;
/* set default/max polling rate */
case SENSOR_POLLRATE_MAX:
return ioctl(filp, SENSORIOCSPOLLRATE, 1600);
case SENSOR_POLLRATE_DEFAULT:
return ioctl(filp, SENSORIOCSPOLLRATE, LSM303D_ACCEL_DEFAULT_RATE);
/* adjust to a legal polling interval in Hz */
default: {
/* do we need to start internal polling? */
bool want_start = (_call_accel_interval == 0);
/* convert hz to hrt interval via microseconds */
unsigned ticks = 1000000 / arg;
/* check against maximum sane rate */
if (ticks < 500)
return -EINVAL;
/* adjust filters */
accel_set_driver_lowpass_filter((float)arg, _accel_filter_x.get_cutoff_freq());
/* update interval for next measurement */
/* XXX this is a bit shady, but no other way to adjust... */
_accel_call.period = _call_accel_interval = ticks;
/* if we need to start the poll state machine, do it */
if (want_start)
start();
return OK;
}
}
}
case SENSORIOCGPOLLRATE:
if (_call_accel_interval == 0)
return SENSOR_POLLRATE_MANUAL;
return 1000000 / _call_accel_interval;
case SENSORIOCSQUEUEDEPTH: {
/* lower bound is mandatory, upper bound is a sanity check */
if ((arg < 1) || (arg > 100))
return -EINVAL;
irqstate_t flags = irqsave();
if (!_accel_reports->resize(arg)) {
irqrestore(flags);
return -ENOMEM;
}
irqrestore(flags);
return OK;
}
case SENSORIOCGQUEUEDEPTH:
return _accel_reports->size();
case SENSORIOCRESET:
reset();
return OK;
case ACCELIOCSSAMPLERATE:
return accel_set_samplerate(arg);
case ACCELIOCGSAMPLERATE:
return _accel_samplerate;
case ACCELIOCSLOWPASS: {
return accel_set_driver_lowpass_filter((float)_accel_samplerate, (float)arg);
}
case ACCELIOCGLOWPASS:
return static_cast<int>(_accel_filter_x.get_cutoff_freq());
case ACCELIOCSSCALE: {
/* copy scale, but only if off by a few percent */
struct accel_scale *s = (struct accel_scale *) arg;
float sum = s->x_scale + s->y_scale + s->z_scale;
if (sum > 2.0f && sum < 4.0f) {
memcpy(&_accel_scale, s, sizeof(_accel_scale));
return OK;
} else {
return -EINVAL;
}
}
case ACCELIOCSRANGE:
/* arg needs to be in G */
return accel_set_range(arg);
case ACCELIOCGRANGE:
/* convert to m/s^2 and return rounded in G */
return (unsigned long)((_accel_range_m_s2)/LSM303D_ONE_G + 0.5f);
case ACCELIOCGSCALE:
/* copy scale out */
memcpy((struct accel_scale *) arg, &_accel_scale, sizeof(_accel_scale));
return OK;
case ACCELIOCSELFTEST:
return accel_self_test();
default:
/* give it to the superclass */
return SPI::ioctl(filp, cmd, arg);
}
}
int
LSM303D::mag_ioctl(struct file *filp, int cmd, unsigned long arg)
{
switch (cmd) {
case SENSORIOCSPOLLRATE: {
switch (arg) {
/* switching to manual polling */
case SENSOR_POLLRATE_MANUAL:
stop();
_call_mag_interval = 0;
return OK;
/* external signalling not supported */
case SENSOR_POLLRATE_EXTERNAL:
/* zero would be bad */
case 0:
return -EINVAL;
/* set default/max polling rate */
case SENSOR_POLLRATE_MAX:
case SENSOR_POLLRATE_DEFAULT:
/* 100 Hz is max for mag */
return mag_ioctl(filp, SENSORIOCSPOLLRATE, 100);
/* adjust to a legal polling interval in Hz */
default: {
/* do we need to start internal polling? */
bool want_start = (_call_mag_interval == 0);
/* convert hz to hrt interval via microseconds */
unsigned ticks = 1000000 / arg;
/* check against maximum sane rate */
if (ticks < 1000)
return -EINVAL;
/* update interval for next measurement */
/* XXX this is a bit shady, but no other way to adjust... */
_mag_call.period = _call_mag_interval = ticks;
/* if we need to start the poll state machine, do it */
if (want_start)
start();
return OK;
}
}
}
case SENSORIOCGPOLLRATE:
if (_call_mag_interval == 0)
return SENSOR_POLLRATE_MANUAL;
return 1000000 / _call_mag_interval;
case SENSORIOCSQUEUEDEPTH: {
/* lower bound is mandatory, upper bound is a sanity check */
if ((arg < 1) || (arg > 100))
return -EINVAL;
irqstate_t flags = irqsave();
if (!_mag_reports->resize(arg)) {
irqrestore(flags);
return -ENOMEM;
}
irqrestore(flags);
return OK;
}
case SENSORIOCGQUEUEDEPTH:
return _mag_reports->size();
case SENSORIOCRESET:
reset();
return OK;
case MAGIOCSSAMPLERATE:
return mag_set_samplerate(arg);
case MAGIOCGSAMPLERATE:
return _mag_samplerate;
case MAGIOCSLOWPASS:
case MAGIOCGLOWPASS:
/* not supported, no internal filtering */
return -EINVAL;
case MAGIOCSSCALE:
/* copy scale in */
memcpy(&_mag_scale, (struct mag_scale *) arg, sizeof(_mag_scale));
return OK;
case MAGIOCGSCALE:
/* copy scale out */
memcpy((struct mag_scale *) arg, &_mag_scale, sizeof(_mag_scale));
return OK;
case MAGIOCSRANGE:
return mag_set_range(arg);
case MAGIOCGRANGE:
return _mag_range_ga;
case MAGIOCSELFTEST:
return mag_self_test();
case MAGIOCGEXTERNAL:
/* Even if this sensor is on the "external" SPI bus
* it is still fixed to the autopilot assembly,
* so always return 0.
*/
return 0;
default:
/* give it to the superclass */
return SPI::ioctl(filp, cmd, arg);
}
}
int
LSM303D::accel_self_test()
{
if (_accel_read == 0)
return 1;
/* inspect accel offsets */
if (fabsf(_accel_scale.x_offset) < 0.000001f)
return 1;
if (fabsf(_accel_scale.x_scale - 1.0f) > 0.4f || fabsf(_accel_scale.x_scale - 1.0f) < 0.000001f)
return 1;
if (fabsf(_accel_scale.y_offset) < 0.000001f)
return 1;
if (fabsf(_accel_scale.y_scale - 1.0f) > 0.4f || fabsf(_accel_scale.y_scale - 1.0f) < 0.000001f)
return 1;
if (fabsf(_accel_scale.z_offset) < 0.000001f)
return 1;
if (fabsf(_accel_scale.z_scale - 1.0f) > 0.4f || fabsf(_accel_scale.z_scale - 1.0f) < 0.000001f)
return 1;
return 0;
}
int
LSM303D::mag_self_test()
{
if (_mag_read == 0)
return 1;
/**
* inspect mag offsets
* don't check mag scale because it seems this is calibrated on chip
*/
if (fabsf(_mag_scale.x_offset) < 0.000001f)
return 1;
if (fabsf(_mag_scale.y_offset) < 0.000001f)
return 1;
if (fabsf(_mag_scale.z_offset) < 0.000001f)
return 1;
return 0;
}
uint8_t
LSM303D::read_reg(unsigned reg)
{
uint8_t cmd[2];
cmd[0] = reg | DIR_READ;
cmd[1] = 0;
transfer(cmd, cmd, sizeof(cmd));
return cmd[1];
}
void
LSM303D::write_reg(unsigned reg, uint8_t value)
{
uint8_t cmd[2];
cmd[0] = reg | DIR_WRITE;
cmd[1] = value;
transfer(cmd, nullptr, sizeof(cmd));
}
void
LSM303D::write_checked_reg(unsigned reg, uint8_t value)
{
write_reg(reg, value);
for (uint8_t i=0; i<LSM303D_NUM_CHECKED_REGISTERS; i++) {
if (reg == _checked_registers[i]) {
_checked_values[i] = value;
}
}
}
void
LSM303D::modify_reg(unsigned reg, uint8_t clearbits, uint8_t setbits)
{
uint8_t val;
val = read_reg(reg);
val &= ~clearbits;
val |= setbits;
write_checked_reg(reg, val);
}
int
LSM303D::accel_set_range(unsigned max_g)
{
uint8_t setbits = 0;
uint8_t clearbits = REG2_FULL_SCALE_BITS_A;
float new_scale_g_digit = 0.0f;
if (max_g == 0)
max_g = 16;
if (max_g <= 2) {
_accel_range_m_s2 = 2.0f*LSM303D_ONE_G;
setbits |= REG2_FULL_SCALE_2G_A;
new_scale_g_digit = 0.061e-3f;
} else if (max_g <= 4) {
_accel_range_m_s2 = 4.0f*LSM303D_ONE_G;
setbits |= REG2_FULL_SCALE_4G_A;
new_scale_g_digit = 0.122e-3f;
} else if (max_g <= 6) {
_accel_range_m_s2 = 6.0f*LSM303D_ONE_G;
setbits |= REG2_FULL_SCALE_6G_A;
new_scale_g_digit = 0.183e-3f;
} else if (max_g <= 8) {
_accel_range_m_s2 = 8.0f*LSM303D_ONE_G;
setbits |= REG2_FULL_SCALE_8G_A;
new_scale_g_digit = 0.244e-3f;
} else if (max_g <= 16) {
_accel_range_m_s2 = 16.0f*LSM303D_ONE_G;
setbits |= REG2_FULL_SCALE_16G_A;
new_scale_g_digit = 0.732e-3f;
} else {
return -EINVAL;
}
_accel_range_scale = new_scale_g_digit * LSM303D_ONE_G;
modify_reg(ADDR_CTRL_REG2, clearbits, setbits);
return OK;
}
int
LSM303D::mag_set_range(unsigned max_ga)
{
uint8_t setbits = 0;
uint8_t clearbits = REG6_FULL_SCALE_BITS_M;
float new_scale_ga_digit = 0.0f;
if (max_ga == 0)
max_ga = 12;
if (max_ga <= 2) {
_mag_range_ga = 2;
setbits |= REG6_FULL_SCALE_2GA_M;
new_scale_ga_digit = 0.080e-3f;
} else if (max_ga <= 4) {
_mag_range_ga = 4;
setbits |= REG6_FULL_SCALE_4GA_M;
new_scale_ga_digit = 0.160e-3f;
} else if (max_ga <= 8) {
_mag_range_ga = 8;
setbits |= REG6_FULL_SCALE_8GA_M;
new_scale_ga_digit = 0.320e-3f;
} else if (max_ga <= 12) {
_mag_range_ga = 12;
setbits |= REG6_FULL_SCALE_12GA_M;
new_scale_ga_digit = 0.479e-3f;
} else {
return -EINVAL;
}
_mag_range_scale = new_scale_ga_digit;
modify_reg(ADDR_CTRL_REG6, clearbits, setbits);
return OK;
}
int
LSM303D::accel_set_onchip_lowpass_filter_bandwidth(unsigned bandwidth)
{
uint8_t setbits = 0;
uint8_t clearbits = REG2_ANTIALIAS_FILTER_BW_BITS_A;
if (bandwidth == 0)
bandwidth = 773;
if (bandwidth <= 50) {
setbits |= REG2_AA_FILTER_BW_50HZ_A;
_accel_onchip_filter_bandwith = 50;
} else if (bandwidth <= 194) {
setbits |= REG2_AA_FILTER_BW_194HZ_A;
_accel_onchip_filter_bandwith = 194;
} else if (bandwidth <= 362) {
setbits |= REG2_AA_FILTER_BW_362HZ_A;
_accel_onchip_filter_bandwith = 362;
} else if (bandwidth <= 773) {
setbits |= REG2_AA_FILTER_BW_773HZ_A;
_accel_onchip_filter_bandwith = 773;
} else {
return -EINVAL;
}
modify_reg(ADDR_CTRL_REG2, clearbits, setbits);
return OK;
}
int
LSM303D::accel_set_driver_lowpass_filter(float samplerate, float bandwidth)
{
_accel_filter_x.set_cutoff_frequency(samplerate, bandwidth);
_accel_filter_y.set_cutoff_frequency(samplerate, bandwidth);
_accel_filter_z.set_cutoff_frequency(samplerate, bandwidth);
return OK;
}
int
LSM303D::accel_set_samplerate(unsigned frequency)
{
uint8_t setbits = 0;
uint8_t clearbits = REG1_RATE_BITS_A;
if (frequency == 0 || frequency == ACCEL_SAMPLERATE_DEFAULT) {
frequency = 1600;
}
if (frequency <= 100) {
setbits |= REG1_RATE_100HZ_A;
_accel_samplerate = 100;
} else if (frequency <= 200) {
setbits |= REG1_RATE_200HZ_A;
_accel_samplerate = 200;
} else if (frequency <= 400) {
setbits |= REG1_RATE_400HZ_A;
_accel_samplerate = 400;
} else if (frequency <= 800) {
setbits |= REG1_RATE_800HZ_A;
_accel_samplerate = 800;
} else if (frequency <= 1600) {
setbits |= REG1_RATE_1600HZ_A;
_accel_samplerate = 1600;
} else {
return -EINVAL;
}
modify_reg(ADDR_CTRL_REG1, clearbits, setbits);
return OK;
}
int
LSM303D::mag_set_samplerate(unsigned frequency)
{
uint8_t setbits = 0;
uint8_t clearbits = REG5_RATE_BITS_M;
if (frequency == 0)
frequency = 100;
if (frequency <= 25) {
setbits |= REG5_RATE_25HZ_M;
_mag_samplerate = 25;
} else if (frequency <= 50) {
setbits |= REG5_RATE_50HZ_M;
_mag_samplerate = 50;
} else if (frequency <= 100) {
setbits |= REG5_RATE_100HZ_M;
_mag_samplerate = 100;
} else {
return -EINVAL;
}
modify_reg(ADDR_CTRL_REG5, clearbits, setbits);
return OK;
}
void
LSM303D::start()
{
/* make sure we are stopped first */
stop();
/* reset the report ring */
_accel_reports->flush();
_mag_reports->flush();
/* start polling at the specified rate */
hrt_call_every(&_accel_call, 1000, _call_accel_interval, (hrt_callout)&LSM303D::measure_trampoline, this);
hrt_call_every(&_mag_call, 1000, _call_mag_interval, (hrt_callout)&LSM303D::mag_measure_trampoline, this);
}
void
LSM303D::stop()
{
hrt_cancel(&_accel_call);
hrt_cancel(&_mag_call);
}
void
LSM303D::measure_trampoline(void *arg)
{
LSM303D *dev = (LSM303D *)arg;
/* make another measurement */
dev->measure();
}
void
LSM303D::mag_measure_trampoline(void *arg)
{
LSM303D *dev = (LSM303D *)arg;
/* make another measurement */
dev->mag_measure();
}
void
LSM303D::check_registers(void)
{
uint8_t v;
if ((v=read_reg(_checked_registers[_checked_next])) != _checked_values[_checked_next]) {
/*
if we get the wrong value then we know the SPI bus
or sensor is very sick. We set _register_wait to 20
and wait until we have seen 20 good values in a row
before we consider the sensor to be OK again.
*/
perf_count(_bad_registers);
/*
try to fix the bad register value. We only try to
fix one per loop to prevent a bad sensor hogging the
bus. We skip zero as that is the WHO_AM_I, which
is not writeable
*/
if (_checked_next != 0) {
write_reg(_checked_registers[_checked_next], _checked_values[_checked_next]);
}
_register_wait = 20;
}
_checked_next = (_checked_next+1) % LSM303D_NUM_CHECKED_REGISTERS;
}
void
LSM303D::measure()
{
/* status register and data as read back from the device */
#pragma pack(push, 1)
struct {
uint8_t cmd;
uint8_t status;
int16_t x;
int16_t y;
int16_t z;
} raw_accel_report;
#pragma pack(pop)
accel_report accel_report;
/* start the performance counter */
perf_begin(_accel_sample_perf);
check_registers();
// if the accel doesn't have any data ready then re-schedule
// for 100 microseconds later. This ensures we don't double
// read a value and then miss the next value.
// Note that DRDY is not available when the lsm303d is
// connected on the external bus
#ifdef GPIO_EXTI_ACCEL_DRDY
if (_bus == PX4_SPI_BUS_SENSORS && stm32_gpioread(GPIO_EXTI_ACCEL_DRDY) == 0) {
perf_count(_accel_reschedules);
hrt_call_delay(&_accel_call, 100);
perf_end(_accel_sample_perf);
return;
}
#endif
if (_register_wait != 0) {
// we are waiting for some good transfers before using
// the sensor again.
_register_wait--;
perf_end(_accel_sample_perf);
return;
}
/* fetch data from the sensor */
memset(&raw_accel_report, 0, sizeof(raw_accel_report));
raw_accel_report.cmd = ADDR_STATUS_A | DIR_READ | ADDR_INCREMENT;
transfer((uint8_t *)&raw_accel_report, (uint8_t *)&raw_accel_report, sizeof(raw_accel_report));
/*
* 1) Scale raw value to SI units using scaling from datasheet.
* 2) Subtract static offset (in SI units)
* 3) Scale the statically calibrated values with a linear
* dynamically obtained factor
*
* Note: the static sensor offset is the number the sensor outputs
* at a nominally 'zero' input. Therefore the offset has to
* be subtracted.
*
* Example: A gyro outputs a value of 74 at zero angular rate
* the offset is 74 from the origin and subtracting
* 74 from all measurements centers them around zero.
*/
accel_report.timestamp = hrt_absolute_time();
// use the temperature from the last mag reading
accel_report.temperature = _last_temperature;
// report the error count as the sum of the number of bad
// register reads and bad values. This allows the higher level
// code to decide if it should use this sensor based on
// whether it has had failures
accel_report.error_count = perf_event_count(_bad_registers) + perf_event_count(_bad_values);
accel_report.x_raw = raw_accel_report.x;
accel_report.y_raw = raw_accel_report.y;
accel_report.z_raw = raw_accel_report.z;
float xraw_f = raw_accel_report.x;
float yraw_f = raw_accel_report.y;
float zraw_f = raw_accel_report.z;
// apply user specified rotation
rotate_3f(_rotation, xraw_f, yraw_f, zraw_f);
float x_in_new = ((xraw_f * _accel_range_scale) - _accel_scale.x_offset) * _accel_scale.x_scale;
float y_in_new = ((yraw_f * _accel_range_scale) - _accel_scale.y_offset) * _accel_scale.y_scale;
float z_in_new = ((zraw_f * _accel_range_scale) - _accel_scale.z_offset) * _accel_scale.z_scale;
/*
we have logs where the accelerometers get stuck at a fixed
large value. We want to detect this and mark the sensor as
being faulty
*/
if (fabsf(_last_accel[0] - x_in_new) < 0.001f &&
fabsf(_last_accel[1] - y_in_new) < 0.001f &&
fabsf(_last_accel[2] - z_in_new) < 0.001f &&
fabsf(x_in_new) > 20 &&
fabsf(y_in_new) > 20 &&
fabsf(z_in_new) > 20) {
_constant_accel_count += 1;
} else {
_constant_accel_count = 0;
}
if (_constant_accel_count > 100) {
// we've had 100 constant accel readings with large
// values. The sensor is almost certainly dead. We
// will raise the error_count so that the top level
// flight code will know to avoid this sensor, but
// we'll still give the data so that it can be logged
// and viewed
perf_count(_bad_values);
_constant_accel_count = 0;
}
_last_accel[0] = x_in_new;
_last_accel[1] = y_in_new;
_last_accel[2] = z_in_new;
accel_report.x = _accel_filter_x.apply(x_in_new);
accel_report.y = _accel_filter_y.apply(y_in_new);
accel_report.z = _accel_filter_z.apply(z_in_new);
accel_report.scaling = _accel_range_scale;
accel_report.range_m_s2 = _accel_range_m_s2;
_accel_reports->force(&accel_report);
/* notify anyone waiting for data */
poll_notify(POLLIN);
if (!(_pub_blocked)) {
/* publish it */
orb_publish(ORB_ID(sensor_accel), _accel_topic, &accel_report);
}
_accel_read++;
/* stop the perf counter */
perf_end(_accel_sample_perf);
}
void
LSM303D::mag_measure()
{
/* status register and data as read back from the device */
#pragma pack(push, 1)
struct {
uint8_t cmd;
int16_t temperature;
uint8_t status;
int16_t x;
int16_t y;
int16_t z;
} raw_mag_report;
#pragma pack(pop)
mag_report mag_report;
memset(&mag_report, 0, sizeof(mag_report));
/* start the performance counter */
perf_begin(_mag_sample_perf);
/* fetch data from the sensor */
memset(&raw_mag_report, 0, sizeof(raw_mag_report));
raw_mag_report.cmd = ADDR_OUT_TEMP_L | DIR_READ | ADDR_INCREMENT;
transfer((uint8_t *)&raw_mag_report, (uint8_t *)&raw_mag_report, sizeof(raw_mag_report));
/*
* 1) Scale raw value to SI units using scaling from datasheet.
* 2) Subtract static offset (in SI units)
* 3) Scale the statically calibrated values with a linear
* dynamically obtained factor
*
* Note: the static sensor offset is the number the sensor outputs
* at a nominally 'zero' input. Therefore the offset has to
* be subtracted.
*
* Example: A gyro outputs a value of 74 at zero angular rate
* the offset is 74 from the origin and subtracting
* 74 from all measurements centers them around zero.
*/
mag_report.timestamp = hrt_absolute_time();
mag_report.x_raw = raw_mag_report.x;
mag_report.y_raw = raw_mag_report.y;
mag_report.z_raw = raw_mag_report.z;
float xraw_f = mag_report.x_raw;
float yraw_f = mag_report.y_raw;
float zraw_f = mag_report.z_raw;
// apply user specified rotation
rotate_3f(_rotation, xraw_f, yraw_f, zraw_f);
mag_report.x = ((xraw_f * _mag_range_scale) - _mag_scale.x_offset) * _mag_scale.x_scale;
mag_report.y = ((yraw_f * _mag_range_scale) - _mag_scale.y_offset) * _mag_scale.y_scale;
mag_report.z = ((zraw_f * _mag_range_scale) - _mag_scale.z_offset) * _mag_scale.z_scale;
mag_report.scaling = _mag_range_scale;
mag_report.range_ga = (float)_mag_range_ga;
mag_report.error_count = perf_event_count(_bad_registers) + perf_event_count(_bad_values);
// remember the temperature. The datasheet isn't clear, but it
// seems to be a signed offset from 25 degrees C in units of 0.125C
_last_temperature = 25 + (raw_mag_report.temperature*0.125f);
_mag_reports->force(&mag_report);
/* XXX please check this poll_notify, is it the right one? */
/* notify anyone waiting for data */
poll_notify(POLLIN);
if (!(_pub_blocked)) {
/* publish it */
orb_publish(ORB_ID(sensor_mag), _mag->_mag_topic, &mag_report);
}
_mag_read++;
/* stop the perf counter */
perf_end(_mag_sample_perf);
}
void
LSM303D::print_info()
{
printf("accel reads: %u\n", _accel_read);
printf("mag reads: %u\n", _mag_read);
perf_print_counter(_accel_sample_perf);
perf_print_counter(_mag_sample_perf);
perf_print_counter(_bad_registers);
perf_print_counter(_bad_values);
perf_print_counter(_accel_reschedules);
_accel_reports->print_info("accel reports");
_mag_reports->print_info("mag reports");
::printf("checked_next: %u\n", _checked_next);
for (uint8_t i=0; i<LSM303D_NUM_CHECKED_REGISTERS; i++) {
uint8_t v = read_reg(_checked_registers[i]);
if (v != _checked_values[i]) {
::printf("reg %02x:%02x should be %02x\n",
(unsigned)_checked_registers[i],
(unsigned)v,
(unsigned)_checked_values[i]);
}
}
::printf("temperature: %.2f\n", _last_temperature);
}
void
LSM303D::print_registers()
{
const struct {
uint8_t reg;
const char *name;
} regmap[] = {
{ ADDR_WHO_AM_I, "WHO_AM_I" },
{ 0x02, "I2C_CONTROL1" },
{ 0x15, "I2C_CONTROL2" },
{ ADDR_STATUS_A, "STATUS_A" },
{ ADDR_STATUS_M, "STATUS_M" },
{ ADDR_CTRL_REG0, "CTRL_REG0" },
{ ADDR_CTRL_REG1, "CTRL_REG1" },
{ ADDR_CTRL_REG2, "CTRL_REG2" },
{ ADDR_CTRL_REG3, "CTRL_REG3" },
{ ADDR_CTRL_REG4, "CTRL_REG4" },
{ ADDR_CTRL_REG5, "CTRL_REG5" },
{ ADDR_CTRL_REG6, "CTRL_REG6" },
{ ADDR_CTRL_REG7, "CTRL_REG7" },
{ ADDR_OUT_TEMP_L, "TEMP_L" },
{ ADDR_OUT_TEMP_H, "TEMP_H" },
{ ADDR_INT_CTRL_M, "INT_CTRL_M" },
{ ADDR_INT_SRC_M, "INT_SRC_M" },
{ ADDR_REFERENCE_X, "REFERENCE_X" },
{ ADDR_REFERENCE_Y, "REFERENCE_Y" },
{ ADDR_REFERENCE_Z, "REFERENCE_Z" },
{ ADDR_OUT_X_L_A, "ACCEL_XL" },
{ ADDR_OUT_X_H_A, "ACCEL_XH" },
{ ADDR_OUT_Y_L_A, "ACCEL_YL" },
{ ADDR_OUT_Y_H_A, "ACCEL_YH" },
{ ADDR_OUT_Z_L_A, "ACCEL_ZL" },
{ ADDR_OUT_Z_H_A, "ACCEL_ZH" },
{ ADDR_FIFO_CTRL, "FIFO_CTRL" },
{ ADDR_FIFO_SRC, "FIFO_SRC" },
{ ADDR_IG_CFG1, "IG_CFG1" },
{ ADDR_IG_SRC1, "IG_SRC1" },
{ ADDR_IG_THS1, "IG_THS1" },
{ ADDR_IG_DUR1, "IG_DUR1" },
{ ADDR_IG_CFG2, "IG_CFG2" },
{ ADDR_IG_SRC2, "IG_SRC2" },
{ ADDR_IG_THS2, "IG_THS2" },
{ ADDR_IG_DUR2, "IG_DUR2" },
{ ADDR_CLICK_CFG, "CLICK_CFG" },
{ ADDR_CLICK_SRC, "CLICK_SRC" },
{ ADDR_CLICK_THS, "CLICK_THS" },
{ ADDR_TIME_LIMIT, "TIME_LIMIT" },
{ ADDR_TIME_LATENCY,"TIME_LATENCY" },
{ ADDR_TIME_WINDOW, "TIME_WINDOW" },
{ ADDR_ACT_THS, "ACT_THS" },
{ ADDR_ACT_DUR, "ACT_DUR" }
};
for (uint8_t i=0; i<sizeof(regmap)/sizeof(regmap[0]); i++) {
printf("0x%02x %s\n", read_reg(regmap[i].reg), regmap[i].name);
}
}
void
LSM303D::test_error()
{
// trigger an error
write_reg(ADDR_CTRL_REG3, 0);
}
LSM303D_mag::LSM303D_mag(LSM303D *parent) :
CDev("LSM303D_mag", LSM303D_DEVICE_PATH_MAG),
_parent(parent),
_mag_topic(-1),
_mag_orb_class_instance(-1),
_mag_class_instance(-1)
{
}
LSM303D_mag::~LSM303D_mag()
{
if (_mag_class_instance != -1)
unregister_class_devname(MAG_BASE_DEVICE_PATH, _mag_class_instance);
}
int
LSM303D_mag::init()
{
int ret;
ret = CDev::init();
if (ret != OK)
goto out;
_mag_class_instance = register_class_devname(MAG_BASE_DEVICE_PATH);
out:
return ret;
}
void
LSM303D_mag::parent_poll_notify()
{
poll_notify(POLLIN);
}
ssize_t
LSM303D_mag::read(struct file *filp, char *buffer, size_t buflen)
{
return _parent->mag_read(filp, buffer, buflen);
}
int
LSM303D_mag::ioctl(struct file *filp, int cmd, unsigned long arg)
{
switch (cmd) {
case DEVIOCGDEVICEID:
return (int)CDev::ioctl(filp, cmd, arg);
break;
default:
return _parent->mag_ioctl(filp, cmd, arg);
}
}
void
LSM303D_mag::measure()
{
_parent->mag_measure();
}
void
LSM303D_mag::measure_trampoline(void *arg)
{
_parent->mag_measure_trampoline(arg);
}
/**
* Local functions in support of the shell command.
*/
namespace lsm303d
{
LSM303D *g_dev;
void start(bool external_bus, enum Rotation rotation);
void test();
void reset();
void info();
void regdump();
void usage();
void test_error();
/**
* Start the driver.
*
* This function call only returns once the driver is
* up and running or failed to detect the sensor.
*/
void
start(bool external_bus, enum Rotation rotation)
{
int fd, fd_mag;
if (g_dev != nullptr)
errx(0, "already started");
/* create the driver */
if (external_bus) {
#ifdef PX4_SPI_BUS_EXT
g_dev = new LSM303D(PX4_SPI_BUS_EXT, LSM303D_DEVICE_PATH_ACCEL, (spi_dev_e)PX4_SPIDEV_EXT_ACCEL_MAG, rotation);
#else
errx(0, "External SPI not available");
#endif
} else {
g_dev = new LSM303D(PX4_SPI_BUS_SENSORS, LSM303D_DEVICE_PATH_ACCEL, (spi_dev_e)PX4_SPIDEV_ACCEL_MAG, rotation);
}
if (g_dev == nullptr) {
warnx("failed instantiating LSM303D obj");
goto fail;
}
if (OK != g_dev->init())
goto fail;
/* set the poll rate to default, starts automatic data collection */
fd = open(LSM303D_DEVICE_PATH_ACCEL, O_RDONLY);
if (fd < 0)
goto fail;
if (ioctl(fd, SENSORIOCSPOLLRATE, SENSOR_POLLRATE_DEFAULT) < 0)
goto fail;
fd_mag = open(LSM303D_DEVICE_PATH_MAG, O_RDONLY);
/* don't fail if open cannot be opened */
if (0 <= fd_mag) {
if (ioctl(fd_mag, SENSORIOCSPOLLRATE, SENSOR_POLLRATE_DEFAULT) < 0) {
goto fail;
}
}
close(fd);
close(fd_mag);
exit(0);
fail:
if (g_dev != nullptr) {
delete g_dev;
g_dev = nullptr;
}
errx(1, "driver start failed");
}
/**
* Perform some basic functional tests on the driver;
* make sure we can collect data from the sensor in polled
* and automatic modes.
*/
void
test()
{
int fd_accel = -1;
struct accel_report accel_report;
ssize_t sz;
int ret;
/* get the driver */
fd_accel = open(LSM303D_DEVICE_PATH_ACCEL, O_RDONLY);
if (fd_accel < 0)
err(1, "%s open failed", LSM303D_DEVICE_PATH_ACCEL);
/* do a simple demand read */
sz = read(fd_accel, &accel_report, sizeof(accel_report));
if (sz != sizeof(accel_report))
err(1, "immediate read failed");
warnx("accel x: \t% 9.5f\tm/s^2", (double)accel_report.x);
warnx("accel y: \t% 9.5f\tm/s^2", (double)accel_report.y);
warnx("accel z: \t% 9.5f\tm/s^2", (double)accel_report.z);
warnx("accel x: \t%d\traw", (int)accel_report.x_raw);
warnx("accel y: \t%d\traw", (int)accel_report.y_raw);
warnx("accel z: \t%d\traw", (int)accel_report.z_raw);
warnx("accel range: %8.4f m/s^2", (double)accel_report.range_m_s2);
if (ERROR == (ret = ioctl(fd_accel, ACCELIOCGLOWPASS, 0)))
warnx("accel antialias filter bandwidth: fail");
else
warnx("accel antialias filter bandwidth: %d Hz", ret);
int fd_mag = -1;
struct mag_report m_report;
/* get the driver */
fd_mag = open(LSM303D_DEVICE_PATH_MAG, O_RDONLY);
if (fd_mag < 0)
err(1, "%s open failed", LSM303D_DEVICE_PATH_MAG);
/* check if mag is onboard or external */
if ((ret = ioctl(fd_mag, MAGIOCGEXTERNAL, 0)) < 0)
errx(1, "failed to get if mag is onboard or external");
warnx("mag device active: %s", ret ? "external" : "onboard");
/* do a simple demand read */
sz = read(fd_mag, &m_report, sizeof(m_report));
if (sz != sizeof(m_report))
err(1, "immediate read failed");
warnx("mag x: \t% 9.5f\tga", (double)m_report.x);
warnx("mag y: \t% 9.5f\tga", (double)m_report.y);
warnx("mag z: \t% 9.5f\tga", (double)m_report.z);
warnx("mag x: \t%d\traw", (int)m_report.x_raw);
warnx("mag y: \t%d\traw", (int)m_report.y_raw);
warnx("mag z: \t%d\traw", (int)m_report.z_raw);
warnx("mag range: %8.4f ga", (double)m_report.range_ga);
/* XXX add poll-rate tests here too */
close(fd_accel);
close(fd_mag);
reset();
errx(0, "PASS");
}
/**
* Reset the driver.
*/
void
reset()
{
int fd = open(LSM303D_DEVICE_PATH_ACCEL, O_RDONLY);
if (fd < 0)
err(1, "failed ");
if (ioctl(fd, SENSORIOCRESET, 0) < 0)
err(1, "driver reset failed");
if (ioctl(fd, SENSORIOCSPOLLRATE, SENSOR_POLLRATE_DEFAULT) < 0)
err(1, "accel pollrate reset failed");
close(fd);
fd = open(LSM303D_DEVICE_PATH_MAG, O_RDONLY);
if (fd < 0) {
warnx("mag could not be opened, external mag might be used");
} else {
/* no need to reset the mag as well, the reset() is the same */
if (ioctl(fd, SENSORIOCSPOLLRATE, SENSOR_POLLRATE_DEFAULT) < 0)
err(1, "mag pollrate reset failed");
}
close(fd);
exit(0);
}
/**
* Print a little info about the driver.
*/
void
info()
{
if (g_dev == nullptr)
errx(1, "driver not running\n");
printf("state @ %p\n", g_dev);
g_dev->print_info();
exit(0);
}
/**
* dump registers from device
*/
void
regdump()
{
if (g_dev == nullptr)
errx(1, "driver not running\n");
printf("regdump @ %p\n", g_dev);
g_dev->print_registers();
exit(0);
}
/**
* trigger an error
*/
void
test_error()
{
if (g_dev == nullptr)
errx(1, "driver not running\n");
g_dev->test_error();
exit(0);
}
void
usage()
{
warnx("missing command: try 'start', 'info', 'test', 'reset', 'testerror' or 'regdump'");
warnx("options:");
warnx(" -X (external bus)");
warnx(" -R rotation");
}
} // namespace
int
lsm303d_main(int argc, char *argv[])
{
bool external_bus = false;
int ch;
enum Rotation rotation = ROTATION_NONE;
/* jump over start/off/etc and look at options first */
while ((ch = getopt(argc, argv, "XR:")) != EOF) {
switch (ch) {
case 'X':
external_bus = true;
break;
case 'R':
rotation = (enum Rotation)atoi(optarg);
break;
default:
lsm303d::usage();
exit(0);
}
}
const char *verb = argv[optind];
/*
* Start/load the driver.
*/
if (!strcmp(verb, "start"))
lsm303d::start(external_bus, rotation);
/*
* Test the driver/device.
*/
if (!strcmp(verb, "test"))
lsm303d::test();
/*
* Reset the driver.
*/
if (!strcmp(verb, "reset"))
lsm303d::reset();
/*
* Print driver information.
*/
if (!strcmp(verb, "info"))
lsm303d::info();
/*
* dump device registers
*/
if (!strcmp(verb, "regdump"))
lsm303d::regdump();
/*
* trigger an error
*/
if (!strcmp(verb, "testerror"))
lsm303d::test_error();
errx(1, "unrecognized command, try 'start', 'test', 'reset', 'info', 'testerror' or 'regdump'");
}
|