diff options
author | patacongo <patacongo@42af7a65-404d-4744-a932-0658087f49c3> | 2013-01-01 16:33:47 +0000 |
---|---|---|
committer | patacongo <patacongo@42af7a65-404d-4744-a932-0658087f49c3> | 2013-01-01 16:33:47 +0000 |
commit | 0573d98ebd5a83a2e6cf11f2b16abd7896d5450f (patch) | |
tree | 8ba80dbcc6c246d6520e968fac44e2e80cd747c1 /nuttx/configs/lm3s6965-ek | |
parent | be55907da3658170e9f7af751dfe42275c7e797b (diff) | |
download | px4-nuttx-0573d98ebd5a83a2e6cf11f2b16abd7896d5450f.tar.gz px4-nuttx-0573d98ebd5a83a2e6cf11f2b16abd7896d5450f.tar.bz2 px4-nuttx-0573d98ebd5a83a2e6cf11f2b16abd7896d5450f.zip |
All lm3s6965-ek configurations converted to use kconfig-frontends
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5470 42af7a65-404d-4744-a932-0658087f49c3
Diffstat (limited to 'nuttx/configs/lm3s6965-ek')
-rw-r--r-- | nuttx/configs/lm3s6965-ek/README.txt | 59 | ||||
-rw-r--r-- | nuttx/configs/lm3s6965-ek/nsh/appconfig | 58 | ||||
-rwxr-xr-x | nuttx/configs/lm3s6965-ek/nsh/defconfig | 800 | ||||
-rw-r--r-- | nuttx/configs/lm3s6965-ek/nx/appconfig | 39 | ||||
-rwxr-xr-x | nuttx/configs/lm3s6965-ek/nx/defconfig | 788 | ||||
-rw-r--r-- | nuttx/configs/lm3s6965-ek/ostest/appconfig | 39 | ||||
-rwxr-xr-x | nuttx/configs/lm3s6965-ek/ostest/defconfig | 705 |
7 files changed, 1536 insertions, 952 deletions
diff --git a/nuttx/configs/lm3s6965-ek/README.txt b/nuttx/configs/lm3s6965-ek/README.txt index 1e3aed2d9..09a07ec68 100644 --- a/nuttx/configs/lm3s6965-ek/README.txt +++ b/nuttx/configs/lm3s6965-ek/README.txt @@ -478,21 +478,68 @@ Where <subdir> is one of the following: Configures the NuttShell (nsh) located at examples/nsh. The Configuration enables both the serial and telnetd NSH interfaces. - NOTE: As it is configured now, you MUST have a network connected. - Otherwise, the NSH prompt will not come up because the Ethernet - driver is waiting for the network to come up. That is probably - a bug in the Ethernet driver behavior! + NOTES: + 1. This configuration uses the mconf-based configuration tool. To + change this configuration using that tool, you should: - Network File System (NFS) support can be added by setting the - following in your configuration file: + a. Build and install the mconf tool. See nuttx/README.txt and + misc/tools/ + + b. Execute 'make menuconfig' in nuttx/ in order to start the + reconfiguration process. + + 2. Default platform/toolchain: + + CONFIG_HOST_LINUX=y : Linux (Cygwin under Windows okay too). + CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y : Buildroot (arm-nuttx-elf-gcc) + CONFIG_RAW_BINARY=y : Output formats: ELF and raw binary + + 3. As it is configured now, you MUST have a network connected. + Otherwise, the NSH prompt will not come up because the Ethernet + driver is waiting for the network to come up. That is probably + a bug in the Ethernet driver behavior! + + 4. Network File System (NFS) support can be added by setting the + following in your configuration file: CONFIG_NFS=y + nx: And example using the NuttX graphics system (NX). This example uses the P14201 OLED driver. + NOTES: + 1. This configuration uses the mconf-based configuration tool. To + change this configuration using that tool, you should: + + a. Build and install the mconf tool. See nuttx/README.txt and + misc/tools/ + + b. Execute 'make menuconfig' in nuttx/ in order to start the + reconfiguration process. + + 2. Default platform/toolchain: + + CONFIG_HOST_LINUX=y : Linux (Cygwin under Windows okay too). + CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y : Buildroot (arm-nuttx-elf-gcc) + CONFIG_RAW_BINARY=y : Output formats: ELF and raw binary + ostest: This configuration directory, performs a simple OS test using examples/ostest. + NOTES: + 1. This configuration uses the mconf-based configuration tool. To + change this configuration using that tool, you should: + + a. Build and install the mconf tool. See nuttx/README.txt and + misc/tools/ + + b. Execute 'make menuconfig' in nuttx/ in order to start the + reconfiguration process. + + 2. Default platform/toolchain: + CONFIG_HOST_LINUX=y : Linux (Cygwin under Windows okay too). + CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y : Buildroot (arm-nuttx-elf-gcc) + CONFIG_RAW_BINARY=y : Output formats: ELF and raw binary diff --git a/nuttx/configs/lm3s6965-ek/nsh/appconfig b/nuttx/configs/lm3s6965-ek/nsh/appconfig deleted file mode 100644 index 6277056d0..000000000 --- a/nuttx/configs/lm3s6965-ek/nsh/appconfig +++ /dev/null @@ -1,58 +0,0 @@ -############################################################################ -# configs/lm3s6965-ek/nsh/appconfig -# -# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt <gnutt@nuttx.org> -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ - -# Path to example in apps/examples containing the user_start entry point - -CONFIGURED_APPS += examples/nsh - -# NSH library - -CONFIGURED_APPS += system/readline -CONFIGURED_APPS += nshlib - -# Networking support - -ifeq ($(CONFIG_NET),y) -CONFIGURED_APPS += netutils/uiplib -CONFIGURED_APPS += netutils/dhcpc -CONFIGURED_APPS += netutils/resolv -CONFIGURED_APPS += netutils/tftpc -CONFIGURED_APPS += netutils/webclient -ifeq ($(CONFIG_NSH_TELNET),y) -CONFIGURED_APPS += netutils/telnetd -endif -endif - - diff --git a/nuttx/configs/lm3s6965-ek/nsh/defconfig b/nuttx/configs/lm3s6965-ek/nsh/defconfig index 7b75178ea..84651012d 100755 --- a/nuttx/configs/lm3s6965-ek/nsh/defconfig +++ b/nuttx/configs/lm3s6965-ek/nsh/defconfig @@ -1,214 +1,232 @@ -############################################################################ -# configs/lm3s6965-ek/nsh/defconfig -# -# Copyright (C) 2010 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt <gnutt@nuttx.org> -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ -# -# Architecture Selection # -CONFIG_ARCH="arm" +# Automatically generated file; DO NOT EDIT. +# Nuttx/ Configuration +# +CONFIG_NUTTX_NEWCONFIG=y + +# +# Build Setup +# +# CONFIG_EXPERIMENTAL is not set +CONFIG_HOST_LINUX=y +# CONFIG_HOST_OSX is not set +# CONFIG_HOST_WINDOWS is not set +# CONFIG_HOST_OTHER is not set + +# +# Build Configuration +# +# CONFIG_APPS_DIR="../apps" +# CONFIG_BUILD_2PASS is not set + +# +# Binary Output Formats +# +# CONFIG_RRLOAD_BINARY is not set +# CONFIG_INTELHEX_BINARY is not set +# CONFIG_MOTOROLA_SREC is not set +CONFIG_RAW_BINARY=y + +# +# Customize Header Files +# +# CONFIG_ARCH_STDBOOL_H is not set +# CONFIG_ARCH_MATH_H is not set +# CONFIG_ARCH_FLOAT_H is not set +# CONFIG_ARCH_STDARG_H is not set + +# +# Debug Options +# +# CONFIG_DEBUG is not set +# CONFIG_DEBUG_SYMBOLS is not set + +# +# System Type +# +# CONFIG_ARCH_8051 is not set CONFIG_ARCH_ARM=y +# CONFIG_ARCH_AVR is not set +# CONFIG_ARCH_HC is not set +# CONFIG_ARCH_MIPS is not set +# CONFIG_ARCH_RGMP is not set +# CONFIG_ARCH_SH is not set +# CONFIG_ARCH_SIM is not set +# CONFIG_ARCH_X86 is not set +# CONFIG_ARCH_Z16 is not set +# CONFIG_ARCH_Z80 is not set +CONFIG_ARCH="arm" + +# +# ARM Options +# +# CONFIG_ARCH_CHIP_C5471 is not set +# CONFIG_ARCH_CHIP_CALYPSO is not set +# CONFIG_ARCH_CHIP_DM320 is not set +# CONFIG_ARCH_CHIP_IMX is not set +# CONFIG_ARCH_CHIP_KINETIS is not set +CONFIG_ARCH_CHIP_LM3S=y +# CONFIG_ARCH_CHIP_LPC17XX is not set +# CONFIG_ARCH_CHIP_LPC214X is not set +# CONFIG_ARCH_CHIP_LPC2378 is not set +# CONFIG_ARCH_CHIP_LPC31XX is not set +# CONFIG_ARCH_CHIP_LPC43XX is not set +# CONFIG_ARCH_CHIP_SAM3U is not set +# CONFIG_ARCH_CHIP_STM32 is not set +# CONFIG_ARCH_CHIP_STR71X is not set CONFIG_ARCH_CORTEXM3=y +CONFIG_ARCH_FAMILY="armv7-m" CONFIG_ARCH_CHIP="lm3s" -CONFIG_ARCH_CHIP_LM3S=y -CONFIG_ARCH_CHIP_LM3S6965=y -CONFIG_ARCH_BOARD="lm3s6965-ek" -CONFIG_ARCH_BOARD_LM3S6965EK=y +CONFIG_ARCH_HAVE_MPU=y +# CONFIG_ARMV7M_MPU is not set CONFIG_BOARD_LOOPSPERMSEC=4531 -CONFIG_DRAM_SIZE=65536 -CONFIG_DRAM_START=0x20000000 -CONFIG_ARCH_IRQPRIO=y -CONFIG_ARCH_INTERRUPTSTACK=0 -CONFIG_ARCH_STACKDUMP=y -CONFIG_ARCH_LEDS=y -CONFIG_ARCH_CALIBRATION=n +# CONFIG_ARCH_CALIBRATION is not set # -# Identify toolchain and linker options +# ARMV7M Configuration Options +# +CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y +# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set +# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set +# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set + # -CONFIG_LM3S_CODESOURCERYW=n -CONFIG_LM3S_CODESOURCERYL=n -CONFIG_LM3S_DEVKITARM=n -CONFIG_LM3S_BUILDROOT=y +# LM3S Configuration Options +# +# CONFIG_ARCH_CHIP_LM3S6918 is not set +# CONFIG_ARCH_CHIP_LM3S9B96 is not set +# CONFIG_ARCH_CHIP_LM3S6432 is not set +CONFIG_ARCH_CHIP_LM3S6965=y +# CONFIG_ARCH_CHIP_LM3S8962 is not set +# CONFIG_LM3S_REVA2 is not set CONFIG_LM3S_DFU=y # -# Disable support for interrupts on GPIOH and GPIOJ which do not -# exist on the LM3S6B96. Additional interrupt support can be -# disabled if desired to reduce memory footprint. -CONFIG_LM3S_DISABLE_GPIOA_IRQS=n -CONFIG_LM3S_DISABLE_GPIOB_IRQS=n -CONFIG_LM3S_DISABLE_GPIOC_IRQS=n -CONFIG_LM3S_DISABLE_GPIOD_IRQS=n -CONFIG_LM3S_DISABLE_GPIOE_IRQS=n -CONFIG_LM3S_DISABLE_GPIOF_IRQS=n -CONFIG_LM3S_DISABLE_GPIOG_IRQS=n +# Select LM3S Peripheral Support +# +CONFIG_LM3S_UART0=y +# CONFIG_LM3S_UART1 is not set +# CONFIG_SSI0_DISABLE is not set +CONFIG_SSI1_DISABLE=y +# CONFIG_LM3S_UART2 is not set +CONFIG_LM3S_ETHERNET=y + +# +# Disable GPIO Interrupts +# +# CONFIG_LM3S_DISABLE_GPIOA_IRQS is not set +# CONFIG_LM3S_DISABLE_GPIOB_IRQS is not set +# CONFIG_LM3S_DISABLE_GPIOC_IRQS is not set +# CONFIG_LM3S_DISABLE_GPIOD_IRQS is not set +# CONFIG_LM3S_DISABLE_GPIOE_IRQS is not set +# CONFIG_LM3S_DISABLE_GPIOF_IRQS is not set +# CONFIG_LM3S_DISABLE_GPIOG_IRQS is not set CONFIG_LM3S_DISABLE_GPIOH_IRQS=y CONFIG_LM3S_DISABLE_GPIOJ_IRQS=y # -# LM3S6965 specific serial device driver settings -# -CONFIG_LM3S_UART0=y -CONFIG_LM3S_UART1=n -CONFIG_LM3S_UART2=n -CONFIG_UART0_SERIAL_CONSOLE=y -CONFIG_UART1_SERIAL_CONSOLE=n -CONFIG_UART2_SERIAL_CONSOLE=n -CONFIG_UART0_TXBUFSIZE=256 -CONFIG_UART1_TXBUFSIZE=256 -CONFIG_UART2_TXBUFSIZE=256 -CONFIG_UART0_RXBUFSIZE=256 -CONFIG_UART1_RXBUFSIZE=256 -CONFIG_UART2_RXBUFSIZE=256 -CONFIG_UART0_BAUD=115200 -CONFIG_UART1_BAUD=115200 -CONFIG_UART2_BAUD=115200 -CONFIG_UART0_BITS=8 -CONFIG_UART1_BITS=8 -CONFIG_UART2_BITS=8 -CONFIG_UART0_PARITY=0 -CONFIG_UART1_PARITY=0 -CONFIG_UART2_PARITY=0 -CONFIG_UART0_2STOP=0 -CONFIG_UART1_2STOP=0 -CONFIG_UART2_2STOP=0 +# LM3S Ethernet Configuration +# +# CONFIG_LM3S_ETHLEDS is not set +# CONFIG_LM3S_BOARDMAC is not set +# CONFIG_LM3S_ETHHDUPLEX is not set +# CONFIG_LM3S_ETHNOAUTOCRC is not set +# CONFIG_LM3S_ETHNOPAD is not set +# CONFIG_LM3S_MULTICAST is not set +# CONFIG_LM3S_PROMISCUOUS is not set +# CONFIG_LM3S_TIMESTAMP is not set +# CONFIG_LM3S_BADCRC is not set +# CONFIG_M3S_DUMPPACKET is not set # -# LM3S6965 specific SSI device driver settings +# LM3S SSI Configuration # -CONFIG_SSI0_DISABLE=n -CONFIG_SSI1_DISABLE=y CONFIG_SSI_POLLWAIT=y -#CONFIG_SSI_TXLIMIT=4 +CONFIG_SSI_TXLIMIT=4 +# CONFIG_NET_MULTICAST is not set +# CONFIG_SDIO_DMA is not set +# CONFIG_SDIO_WIDTH_D1_ONLY is not set # -# LM3S6965 specific serial device driver settings +# Architecture Options # -CONFIG_LM3S_ETHERNET=y -CONFIG_LM3S_ETHLEDS=n -CONFIG_LM3S_BOARDMAC=n -CONFIG_LM3S_ETHHDUPLEX=n -CONFIG_LM3S_ETHNOAUTOCRC=n -CONFIG_LM3S_ETHNOPAD=n -CONFIG_LM3S_MULTICAST=n -CONFIG_LM3S_PROMISCUOUS=n -CONFIG_LM3S_BADCRC=n -CONFIG_LM3S_DUMPPACKET=n - -# -# General build options -# -CONFIG_RRLOAD_BINARY=n -CONFIG_INTELHEX_BINARY=n -CONFIG_MOTOROLA_SREC=n -CONFIG_RAW_BINARY=y +# CONFIG_ARCH_NOINTC is not set +# CONFIG_ARCH_DMA is not set +CONFIG_ARCH_IRQPRIO=y +# CONFIG_CUSTOM_STACK is not set +# CONFIG_ADDRENV is not set +CONFIG_ARCH_STACKDUMP=y +# CONFIG_ENDIAN_BIG is not set # -# General OS setup +# Board Settings # -CONFIG_USER_ENTRYPOINT="nsh_main" -CONFIG_DEBUG=n -CONFIG_DEBUG_VERBOSE=n -CONFIG_DEBUG_SYMBOLS=n -CONFIG_DEBUG_NET=n -CONFIG_MM_REGIONS=1 -CONFIG_ARCH_LOWPUTC=y +CONFIG_DRAM_START=0x20000000 +CONFIG_DRAM_SIZE=65536 +CONFIG_ARCH_HAVE_INTERRUPTSTACK=y +CONFIG_ARCH_INTERRUPTSTACK=0 + +# +# Boot options +# +# CONFIG_BOOT_RUNFROMEXTSRAM is not set +CONFIG_BOOT_RUNFROMFLASH=y +# CONFIG_BOOT_RUNFROMISRAM is not set +# CONFIG_BOOT_RUNFROMSDRAM is not set +# CONFIG_BOOT_COPYTORAM is not set + +# +# Board Selection +# +CONFIG_ARCH_BOARD_LM3S6965EK=y +# CONFIG_ARCH_BOARD_CUSTOM is not set +CONFIG_ARCH_BOARD="lm3s6965-ek" + +# +# Common Board Options +# +CONFIG_ARCH_HAVE_LEDS=y +CONFIG_ARCH_LEDS=y +CONFIG_NSH_MMCSDMINOR=0 +CONFIG_NSH_MMCSDSLOTNO=0 + +# +# Board-Specific Options +# + +# +# RTOS Features +# +CONFIG_MSEC_PER_TICK=10 CONFIG_RR_INTERVAL=200 -CONFIG_SCHED_INSTRUMENTATION=n +# CONFIG_SCHED_INSTRUMENTATION is not set CONFIG_TASK_NAME_SIZE=0 +# CONFIG_JULIAN_TIME is not set CONFIG_START_YEAR=2010 CONFIG_START_MONTH=5 CONFIG_START_DAY=8 -CONFIG_GREGORIAN_TIME=n -CONFIG_JULIAN_TIME=n CONFIG_DEV_CONSOLE=y -CONFIG_DEV_LOWCONSOLE=n -CONFIG_MUTEX_TYPES=n -CONFIG_PRIORITY_INHERITANCE=n -CONFIG_SEM_PREALLOCHOLDERS=0 -CONFIG_SEM_NNESTPRIO=0 -CONFIG_FDCLONE_DISABLE=n -CONFIG_FDCLONE_STDIO=n +# CONFIG_MUTEX_TYPES is not set +# CONFIG_PRIORITY_INHERITANCE is not set +# CONFIG_FDCLONE_DISABLE is not set +# CONFIG_FDCLONE_STDIO is not set CONFIG_SDCLONE_DISABLE=y -CONFIG_NXFLAT=n - -# -# The following can be used to disable categories of -# APIs supported by the OS. If the compiler supports -# weak functions, then it should not be necessary to -# disable functions unless you want to restrict usage -# of those APIs. -# -# There are certain dependency relationships in these -# features. -# -# o mq_notify logic depends on signals to awaken tasks -# waiting for queues to become full or empty. -# o pthread_condtimedwait() depends on signals to wake -# up waiting tasks. -# -CONFIG_DISABLE_CLOCK=n -CONFIG_DISABLE_POSIX_TIMERS=n -CONFIG_DISABLE_PTHREAD=n -CONFIG_DISABLE_SIGNALS=n -CONFIG_DISABLE_MQUEUE=n -CONFIG_DISABLE_MOUNTPOINT=n -CONFIG_DISABLE_ENVIRON=n +# CONFIG_SCHED_WORKQUEUE is not set +# CONFIG_SCHED_WAITPID is not set +# CONFIG_SCHED_ATEXIT is not set +# CONFIG_SCHED_ONEXIT is not set +CONFIG_USER_ENTRYPOINT="nsh_main" +CONFIG_DISABLE_OS_API=y +# CONFIG_DISABLE_CLOCK is not set +# CONFIG_DISABLE_POSIX_TIMERS is not set +# CONFIG_DISABLE_PTHREAD is not set +# CONFIG_DISABLE_SIGNALS is not set +# CONFIG_DISABLE_MQUEUE is not set +# CONFIG_DISABLE_MOUNTPOINT is not set +# CONFIG_DISABLE_ENVIRON is not set CONFIG_DISABLE_POLL=y # -# Misc libc settings -# -CONFIG_NOPRINTF_FIELDWIDTH=n - -# -# Allow for architecture optimized implementations -# -# The architecture can provide optimized versions of the -# following to improve system performance -# -CONFIG_ARCH_MEMCPY=n -CONFIG_ARCH_MEMCMP=n -CONFIG_ARCH_MEMMOVE=n -CONFIG_ARCH_MEMSET=n -CONFIG_ARCH_STRCMP=n -CONFIG_ARCH_STRCPY=n -CONFIG_ARCH_STRNCPY=n -CONFIG_ARCH_STRLEN=n -CONFIG_ARCH_STRNLEN=n -CONFIG_ARCH_BZERO=n - -# # Sizes of configurable things (0 disables) # CONFIG_MAX_TASKS=16 @@ -217,8 +235,6 @@ CONFIG_NPTHREAD_KEYS=4 CONFIG_NFILE_DESCRIPTORS=8 CONFIG_NFILE_STREAMS=8 CONFIG_NAME_MAX=32 -CONFIG_STDIO_BUFFER_SIZE=256 -CONFIG_NUNGET_CHARS=2 CONFIG_PREALLOC_MQ_MSGS=4 CONFIG_MQ_MAXMSGSIZE=32 CONFIG_MAX_WDOGPARMS=2 @@ -226,126 +242,414 @@ CONFIG_PREALLOC_WDOGS=4 CONFIG_PREALLOC_TIMERS=4 # -# Filesystem configuration +# Stack and heap information # -CONFIG_FS_FAT=y -CONFIG_FS_ROMFS=n -CONFIG_NFS=n +CONFIG_IDLETHREAD_STACKSIZE=1024 +CONFIG_USERMAIN_STACKSIZE=2048 +CONFIG_PTHREAD_STACK_MIN=256 +CONFIG_PTHREAD_STACK_DEFAULT=2048 # -# Maintain legacy build behavior (revisit) -# - +# Device Drivers +# +CONFIG_DEV_NULL=y +# CONFIG_DEV_ZERO is not set +# CONFIG_LOOP is not set +# CONFIG_RAMDISK is not set +# CONFIG_CAN is not set +# CONFIG_PWM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +# CONFIG_RTC is not set +# CONFIG_WATCHDOG is not set +# CONFIG_ANALOG is not set +# CONFIG_BCH is not set +# CONFIG_INPUT is not set +# CONFIG_LCD is not set CONFIG_MMCSD=y +CONFIG_MMCSD_NSLOTS=1 +# CONFIG_MMCSD_READONLY is not set +# CONFIG_MMCSD_MULTIBLOCK_DISABLE is not set +CONFIG_MMCSD_MMCSUPPORT=y +CONFIG_MMCSD_HAVECARDDETECT=y CONFIG_MMCSD_SPI=y +CONFIG_MMCSD_SPICLOCK=12500000 CONFIG_MMCSD_SDIO=y +# CONFIG_SDIO_MUXBUS is not set +# CONFIG_MTD is not set +# CONFIG_NETDEVICES is not set +# CONFIG_NET_SLIP is not set +# CONFIG_PIPES is not set +# CONFIG_PM is not set +# CONFIG_POWER is not set +# CONFIG_SENSORS is not set +# CONFIG_SERCOMM_CONSOLE is not set +CONFIG_SERIAL=y +# CONFIG_DEV_LOWCONSOLE is not set +# CONFIG_16550_UART is not set +CONFIG_ARCH_HAVE_UART0=y +CONFIG_MCU_SERIAL=y +CONFIG_STANDARD_SERIAL=y +CONFIG_UART0_SERIAL_CONSOLE=y +# CONFIG_NO_SERIAL_CONSOLE is not set # -# SPI-based MMC/SD driver +# UART0 Configuration # -CONFIG_MMCSD_NSLOTS=1 -CONFIG_MMCSD_READONLY=n -CONFIG_MMCSD_SPICLOCK=12500000 +CONFIG_UART0_RXBUFSIZE=256 +CONFIG_UART0_TXBUFSIZE=256 +CONFIG_UART0_BAUD=115200 +CONFIG_UART0_BITS=8 +CONFIG_UART0_PARITY=0 +CONFIG_UART0_2STOP=0 +# CONFIG_USBDEV is not set +# CONFIG_USBHOST is not set +# CONFIG_WIRELESS is not set # -# TCP/IP and UDP support via uIP +# System Logging Device Options +# + +# +# System Logging +# +# CONFIG_RAMLOG is not set + +# +# Networking Support # CONFIG_NET=y -CONFIG_NET_IPv6=n +# CONFIG_NET_NOINTS is not set +# CONFIG_NET_MULTIBUFFER is not set +# CONFIG_NET_IPv6 is not set CONFIG_NSOCKET_DESCRIPTORS=8 +CONFIG_NET_NACTIVESOCKETS=16 CONFIG_NET_SOCKOPTS=y CONFIG_NET_BUFSIZE=562 +# CONFIG_NET_TCPURGDATA is not set CONFIG_NET_TCP=y CONFIG_NET_TCP_CONNS=8 -CONFIG_NET_NTCP_READAHEAD_BUFFERS=16 -CONFIG_NET_TCPBACKLOG=n CONFIG_NET_MAX_LISTENPORTS=8 +CONFIG_NET_TCP_READAHEAD_BUFSIZE=562 +CONFIG_NET_NTCP_READAHEAD_BUFFERS=16 +CONFIG_NET_TCP_RECVDELAY=0 +# CONFIG_NET_TCPBACKLOG is not set CONFIG_NET_UDP=y CONFIG_NET_UDP_CHECKSUMS=y -#CONFIG_NET_UDP_CONNS=8 +CONFIG_NET_UDP_CONNS=8 +# CONFIG_NET_BROADCAST is not set CONFIG_NET_ICMP=y CONFIG_NET_ICMP_PING=y -#CONFIG_NET_PINGADDRCONF=0 +# CONFIG_NET_PINGADDRCONF is not set +# CONFIG_NET_IGMP is not set CONFIG_NET_STATISTICS=y -#CONFIG_NET_RECEIVE_WINDOW= -#CONFIG_NET_ARPTAB_SIZE=8 -CONFIG_NET_BROADCAST=n +CONFIG_NET_RECEIVE_WINDOW=562 +CONFIG_NET_ARPTAB_SIZE=16 +# CONFIG_NET_ARP_IPIN is not set # -# UIP Network Utilities +# File Systems +# + +# +# File system configuration +# +CONFIG_FS_FAT=y +# CONFIG_FAT_LCNAMES is not set +# CONFIG_FAT_LFN is not set +# CONFIG_FS_FATTIME is not set +# CONFIG_FAT_DMAMEMORY is not set +# CONFIG_FS_RAMMAP is not set +# CONFIG_NFS is not set +# CONFIG_FS_NXFFS is not set +# CONFIG_FS_ROMFS is not set + +# +# System Logging +# +# CONFIG_SYSLOG is not set + +# +# Graphics Support +# +# CONFIG_NX is not set + +# +# Memory Management +# +# CONFIG_MM_SMALL is not set +CONFIG_MM_REGIONS=1 +# CONFIG_GRAN is not set + +# +# Binary Formats +# +# CONFIG_BINFMT_DISABLE is not set +# CONFIG_BINFMT_EXEPATH is not set +# CONFIG_NXFLAT is not set +# CONFIG_ELF is not set +# CONFIG_PIC is not set +# CONFIG_SYMTAB_ORDEREDBYNAME is not set + +# +# Library Routines +# + +# +# Standard C Library Options +# +CONFIG_STDIO_BUFFER_SIZE=256 +CONFIG_STDIO_LINEBUFFER=y +CONFIG_NUNGET_CHARS=2 +CONFIG_LIB_HOMEDIR="/" +# CONFIG_LIBM is not set +# CONFIG_NOPRINTF_FIELDWIDTH is not set +# CONFIG_LIBC_FLOATINGPOINT is not set +# CONFIG_EOL_IS_CR is not set +# CONFIG_EOL_IS_LF is not set +# CONFIG_EOL_IS_BOTH_CRLF is not set +CONFIG_EOL_IS_EITHER_CRLF=y +# CONFIG_LIBC_STRERROR is not set +# CONFIG_LIBC_PERROR_STDOUT is not set +CONFIG_ARCH_LOWPUTC=y +CONFIG_LIB_SENDFILE_BUFSIZE=512 +# CONFIG_ARCH_ROMGETC is not set +# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set + +# +# Non-standard Helper Functions +# +CONFIG_LIB_KBDCODEC=y + +# +# Basic CXX Support +# +# CONFIG_C99_BOOL8 is not set +# CONFIG_HAVE_CXX is not set + +# +# Application Configuration # -CONFIG_NET_DHCP_LIGHT=n -CONFIG_NET_RESOLV_ENTRIES=4 # -# Settings for examples/uip +# Built-In Applications # -CONFIG_EXAMPLES_UIP_IPADDR=0x0a000002 -CONFIG_EXAMPLES_UIP_DRIPADDR=0x0a000001 -CONFIG_EXAMPLES_UIP_NETMASK=0xffffff00 -CONFIG_EXAMPLES_UIP_DHCPC=n +# CONFIG_BUILTIN is not set # -# Settings for examples/nettest -CONFIG_EXAMPLES_NETTEST_SERVER=n -CONFIG_EXAMPLES_NETTEST_PERFORMANCE=n -CONFIG_EXAMPLES_NETTEST_NOMAC=n -CONFIG_EXAMPLES_NETTEST_IPADDR=0x0a000002 -CONFIG_EXAMPLES_NETTEST_DRIPADDR=0x0a000001 -CONFIG_EXAMPLES_NETTEST_NETMASK=0xffffff00 -CONFIG_EXAMPLES_NETTEST_CLIENTIP=0x0a000001 +# Examples +# +# CONFIG_EXAMPLES_BUTTONS is not set +# CONFIG_EXAMPLES_CAN is not set +# CONFIG_EXAMPLES_CDCACM is not set +# CONFIG_EXAMPLES_COMPOSITE is not set +# CONFIG_EXAMPLES_DHCPD is not set +# CONFIG_EXAMPLES_ELF is not set +# CONFIG_EXAMPLES_FTPC is not set +# CONFIG_EXAMPLES_FTPD is not set +# CONFIG_EXAMPLES_HELLO is not set +# CONFIG_EXAMPLES_HELLOXX is not set +# CONFIG_EXAMPLES_JSON is not set +# CONFIG_EXAMPLES_HIDKBD is not set +# CONFIG_EXAMPLES_KEYPADTEST is not set +# CONFIG_EXAMPLES_IGMP is not set +# CONFIG_EXAMPLES_LCDRW is not set +# CONFIG_EXAMPLES_MM is not set +# CONFIG_EXAMPLES_MOUNT is not set +# CONFIG_EXAMPLES_MODBUS is not set +# CONFIG_EXAMPLES_NETTEST is not set +CONFIG_EXAMPLES_NSH=y +# CONFIG_EXAMPLES_NULL is not set +# CONFIG_EXAMPLES_NX is not set +# CONFIG_EXAMPLES_NXCONSOLE is not set +# CONFIG_EXAMPLES_NXFFS is not set +# CONFIG_EXAMPLES_NXFLAT is not set +# CONFIG_EXAMPLES_NXHELLO is not set +# CONFIG_EXAMPLES_NXIMAGE is not set +# CONFIG_EXAMPLES_NXLINES is not set +# CONFIG_EXAMPLES_NXTEXT is not set +# CONFIG_EXAMPLES_OSTEST is not set +# CONFIG_EXAMPLES_PASHELLO is not set +# CONFIG_EXAMPLES_PIPE is not set +# CONFIG_EXAMPLES_POLL is not set +# CONFIG_EXAMPLES_QENCODER is not set +# CONFIG_EXAMPLES_RGMP is not set +# CONFIG_EXAMPLES_ROMFS is not set +# CONFIG_EXAMPLES_SENDMAIL is not set +# CONFIG_EXAMPLES_SERLOOP is not set +# CONFIG_EXAMPLES_TELNETD is not set +# CONFIG_EXAMPLES_THTTPD is not set +# CONFIG_EXAMPLES_TIFF is not set +# CONFIG_EXAMPLES_TOUCHSCREEN is not set +# CONFIG_EXAMPLES_UDP is not set +# CONFIG_EXAMPLES_DISCOVER is not set +# CONFIG_EXAMPLES_UIP is not set +# CONFIG_EXAMPLES_USBSERIAL is not set +# CONFIG_EXAMPLES_USBMSC is not set +# CONFIG_EXAMPLES_USBTERM is not set +# CONFIG_EXAMPLES_WATCHDOG is not set +# CONFIG_EXAMPLES_WGET is not set # -# Settings for examples/ostest +# Interpreters # -CONFIG_EXAMPLES_OSTEST_LOOPS=1 -CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048 -CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3 # -# Settings for apps/nshlib +# Interpreters # +# CONFIG_INTERPRETERS_FICL is not set +# CONFIG_INTERPRETERS_PCODE is not set + +# +# Network Utilities +# + +# +# Networking Utilities +# +# CONFIG_NETUTILS_CODECS is not set +CONFIG_NETUTILS_DHCPC=y +# CONFIG_NETUTILS_DHCPD is not set +# CONFIG_NETUTILS_FTPC is not set +# CONFIG_NETUTILS_FTPD is not set +# CONFIG_NETUTILS_JSON is not set +CONFIG_NETUTILS_RESOLV=y +CONFIG_NET_RESOLV_ENTRIES=4 +CONFIG_NET_RESOLV_MAXRESPONSE=96 +# CONFIG_NETUTILS_SMTP is not set +CONFIG_NETUTILS_TELNETD=y +CONFIG_NETUTILS_TFTPC=y +# CONFIG_NETUTILS_THTTPD is not set +CONFIG_NETUTILS_UIPLIB=y +CONFIG_NETUTILS_WEBCLIENT=y +CONFIG_NSH_WGET_USERAGENT="NuttX/6.xx.x (; http://www.nuttx.org/)" +# CONFIG_NETUTILS_WEBSERVER is not set +# CONFIG_NETUTILS_DISCOVER is not set +# CONFIG_NETUTILS_XMLRPC is not set + +# +# ModBus +# + +# +# FreeModbus +# +# CONFIG_MODBUS is not set + +# +# NSH Library +# +CONFIG_NSH_LIBRARY=y + +# +# Disable Individual commands +# +# CONFIG_NSH_DISABLE_CAT is not set +# CONFIG_NSH_DISABLE_CD is not set +# CONFIG_NSH_DISABLE_CP is not set +# CONFIG_NSH_DISABLE_DD is not set +# CONFIG_NSH_DISABLE_ECHO is not set +# CONFIG_NSH_DISABLE_EXEC is not set +# CONFIG_NSH_DISABLE_EXIT is not set +# CONFIG_NSH_DISABLE_FREE is not set +# CONFIG_NSH_DISABLE_GET is not set +# CONFIG_NSH_DISABLE_HELP is not set +# CONFIG_NSH_DISABLE_HEXDUMP is not set +# CONFIG_NSH_DISABLE_IFCONFIG is not set +# CONFIG_NSH_DISABLE_KILL is not set +# CONFIG_NSH_DISABLE_LOSETUP is not set +# CONFIG_NSH_DISABLE_LS is not set +# CONFIG_NSH_DISABLE_MB is not set +# CONFIG_NSH_DISABLE_MKDIR is not set +# CONFIG_NSH_DISABLE_MKFATFS is not set +# CONFIG_NSH_DISABLE_MKFIFO is not set +# CONFIG_NSH_DISABLE_MKRD is not set +# CONFIG_NSH_DISABLE_MH is not set +# CONFIG_NSH_DISABLE_MOUNT is not set +# CONFIG_NSH_DISABLE_MW is not set +# CONFIG_NSH_DISABLE_NSFMOUNT is not set +# CONFIG_NSH_DISABLE_PS is not set +# CONFIG_NSH_DISABLE_PING is not set +# CONFIG_NSH_DISABLE_PUT is not set +# CONFIG_NSH_DISABLE_PWD is not set +# CONFIG_NSH_DISABLE_RM is not set +# CONFIG_NSH_DISABLE_RMDIR is not set +# CONFIG_NSH_DISABLE_SET is not set +# CONFIG_NSH_DISABLE_SH is not set +# CONFIG_NSH_DISABLE_SLEEP is not set +# CONFIG_NSH_DISABLE_TEST is not set +# CONFIG_NSH_DISABLE_UMOUNT is not set +# CONFIG_NSH_DISABLE_UNSET is not set +# CONFIG_NSH_DISABLE_USLEEP is not set +# CONFIG_NSH_DISABLE_WGET is not set +# CONFIG_NSH_DISABLE_XD is not set +CONFIG_NSH_CODECS_BUFSIZE=128 CONFIG_NSH_FILEIOSIZE=512 -CONFIG_NSH_STRERROR=n CONFIG_NSH_LINELEN=64 CONFIG_NSH_NESTDEPTH=3 -CONFIG_NSH_DISABLESCRIPT=n -CONFIG_NSH_DISABLEBG=n -CONFIG_NSH_ROMFSETC=n +# CONFIG_NSH_DISABLESCRIPT is not set +# CONFIG_NSH_DISABLEBG is not set CONFIG_NSH_CONSOLE=y -CONFIG_NSH_TELNET=y +# CONFIG_NSH_CONDEV is not set CONFIG_NSH_ARCHINIT=y +CONFIG_NSH_TELNET=y +CONFIG_NSH_TELNETD_PORT=23 +CONFIG_NSH_TELNETD_DAEMONPRIO=100 +CONFIG_NSH_TELNETD_DAEMONSTACKSIZE=2048 +CONFIG_NSH_TELNETD_CLIENTPRIO=100 +CONFIG_NSH_TELNETD_CLIENTSTACKSIZE=2048 CONFIG_NSH_IOBUFFER_SIZE=512 -CONFIG_NSH_DHCPC=n -CONFIG_NSH_NOMAC=y +# CONFIG_NSH_TELNET_LOGIN is not set CONFIG_NSH_IPADDR=0x0a000002 CONFIG_NSH_DRIPADDR=0x0a000001 CONFIG_NSH_NETMASK=0xffffff00 -CONFIG_NSH_ROMFSMOUNTPT="/etc" -CONFIG_NSH_INITSCRIPT="init.d/rcS" -CONFIG_NSH_ROMFSDEVNO=0 -CONFIG_NSH_ROMFSSECTSIZE=64 -CONFIG_NSH_FATDEVNO=1 -CONFIG_NSH_FATSECTSIZE=512 -CONFIG_NSH_FATNSECTORS=1024 -CONFIG_NSH_FATMOUNTPT="/tmp" +CONFIG_NSH_NOMAC=y +CONFIG_NSH_MAX_ROUNDTRIP=20 # -# Architecture-specific NSH options +# NxWidgets/NxWM # -CONFIG_NSH_MMCSDSPIPORTNO=0 -CONFIG_NSH_MMCSDSLOTNO=0 -CONFIG_NSH_MMCSDMINOR=0 # -# Stack and heap information +# System NSH Add-Ons # -CONFIG_BOOT_RUNFROMFLASH=n -CONFIG_BOOT_COPYTORAM=n -CONFIG_CUSTOM_STACK=n -CONFIG_IDLETHREAD_STACKSIZE=1024 -CONFIG_USERMAIN_STACKSIZE=2048 -CONFIG_PTHREAD_STACK_MIN=256 -CONFIG_PTHREAD_STACK_DEFAULT=2048 -CONFIG_HEAP_BASE= -CONFIG_HEAP_SIZE= + +# +# Custom Free Memory Command +# +# CONFIG_SYSTEM_FREE is not set + +# +# I2C tool +# + +# +# FLASH Program Installation +# +# CONFIG_SYSTEM_INSTALL is not set + +# +# readline() +# +CONFIG_SYSTEM_READLINE=y +CONFIG_READLINE_ECHO=y + +# +# Power Off +# +# CONFIG_SYSTEM_POWEROFF is not set + +# +# RAMTRON +# +# CONFIG_SYSTEM_RAMTRON is not set + +# +# SD Card +# +# CONFIG_SYSTEM_SDCARD is not set + +# +# Sysinfo +# +# CONFIG_SYSTEM_SYSINFO is not set diff --git a/nuttx/configs/lm3s6965-ek/nx/appconfig b/nuttx/configs/lm3s6965-ek/nx/appconfig deleted file mode 100644 index 69f92ce3a..000000000 --- a/nuttx/configs/lm3s6965-ek/nx/appconfig +++ /dev/null @@ -1,39 +0,0 @@ -############################################################################ -# configs/lm3s6965-ek/nx/appconfig -# -# Copyright (C) 2011 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt <gnutt@nuttx.org> -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ - -# Path to example in apps/examples containing the user_start entry point - -CONFIGURED_APPS += examples/nx - diff --git a/nuttx/configs/lm3s6965-ek/nx/defconfig b/nuttx/configs/lm3s6965-ek/nx/defconfig index bca864013..5fb666e65 100755 --- a/nuttx/configs/lm3s6965-ek/nx/defconfig +++ b/nuttx/configs/lm3s6965-ek/nx/defconfig @@ -1,220 +1,213 @@ -############################################################################ -# configs/lm3s6965-ek/nx/defconfig -# -# Copyright (C) 2010 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt <gnutt@nuttx.org> -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ -# -# Architecture Selection # -CONFIG_ARCH="arm" +# Automatically generated file; DO NOT EDIT. +# Nuttx/ Configuration +# +CONFIG_NUTTX_NEWCONFIG=y + +# +# Build Setup +# +# CONFIG_EXPERIMENTAL is not set +CONFIG_HOST_LINUX=y +# CONFIG_HOST_OSX is not set +# CONFIG_HOST_WINDOWS is not set +# CONFIG_HOST_OTHER is not set + +# +# Build Configuration +# +# CONFIG_APPS_DIR="../apps" +# CONFIG_BUILD_2PASS is not set + +# +# Binary Output Formats +# +# CONFIG_RRLOAD_BINARY is not set +# CONFIG_INTELHEX_BINARY is not set +# CONFIG_MOTOROLA_SREC is not set +CONFIG_RAW_BINARY=y + +# +# Customize Header Files +# +# CONFIG_ARCH_STDBOOL_H is not set +# CONFIG_ARCH_MATH_H is not set +# CONFIG_ARCH_FLOAT_H is not set +# CONFIG_ARCH_STDARG_H is not set + +# +# Debug Options +# +# CONFIG_DEBUG is not set +# CONFIG_DEBUG_SYMBOLS is not set + +# +# System Type +# +# CONFIG_ARCH_8051 is not set CONFIG_ARCH_ARM=y +# CONFIG_ARCH_AVR is not set +# CONFIG_ARCH_HC is not set +# CONFIG_ARCH_MIPS is not set +# CONFIG_ARCH_RGMP is not set +# CONFIG_ARCH_SH is not set +# CONFIG_ARCH_SIM is not set +# CONFIG_ARCH_X86 is not set +# CONFIG_ARCH_Z16 is not set +# CONFIG_ARCH_Z80 is not set +CONFIG_ARCH="arm" + +# +# ARM Options +# +# CONFIG_ARCH_CHIP_C5471 is not set +# CONFIG_ARCH_CHIP_CALYPSO is not set +# CONFIG_ARCH_CHIP_DM320 is not set +# CONFIG_ARCH_CHIP_IMX is not set +# CONFIG_ARCH_CHIP_KINETIS is not set +CONFIG_ARCH_CHIP_LM3S=y +# CONFIG_ARCH_CHIP_LPC17XX is not set +# CONFIG_ARCH_CHIP_LPC214X is not set +# CONFIG_ARCH_CHIP_LPC2378 is not set +# CONFIG_ARCH_CHIP_LPC31XX is not set +# CONFIG_ARCH_CHIP_LPC43XX is not set +# CONFIG_ARCH_CHIP_SAM3U is not set +# CONFIG_ARCH_CHIP_STM32 is not set +# CONFIG_ARCH_CHIP_STR71X is not set CONFIG_ARCH_CORTEXM3=y +CONFIG_ARCH_FAMILY="armv7-m" CONFIG_ARCH_CHIP="lm3s" -CONFIG_ARCH_CHIP_LM3S=y -CONFIG_ARCH_CHIP_LM3S6965=y -CONFIG_ARCH_BOARD="lm3s6965-ek" -CONFIG_ARCH_BOARD_LM3S6965EK=y +CONFIG_ARCH_HAVE_MPU=y +# CONFIG_ARMV7M_MPU is not set CONFIG_BOARD_LOOPSPERMSEC=4531 -CONFIG_DRAM_SIZE=65536 -CONFIG_DRAM_START=0x20000000 -CONFIG_ARCH_IRQPRIO=y -CONFIG_ARCH_INTERRUPTSTACK=0 -CONFIG_ARCH_STACKDUMP=y -CONFIG_ARCH_LEDS=y -CONFIG_ARCH_CALIBRATION=n +# CONFIG_ARCH_CALIBRATION is not set + +# +# ARMV7M Configuration Options +# +CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y +# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set +# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set +# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set # -# Identify toolchain and linker options +# LM3S Configuration Options # -CONFIG_LM3S_CODESOURCERYW=n -CONFIG_LM3S_CODESOURCERYL=n -CONFIG_LM3S_DEVKITARM=n -CONFIG_LM3S_BUILDROOT=y +# CONFIG_ARCH_CHIP_LM3S6918 is not set +# CONFIG_ARCH_CHIP_LM3S9B96 is not set +# CONFIG_ARCH_CHIP_LM3S6432 is not set +CONFIG_ARCH_CHIP_LM3S6965=y +# CONFIG_ARCH_CHIP_LM3S8962 is not set +# CONFIG_LM3S_REVA2 is not set CONFIG_LM3S_DFU=y # -# Disable support for interrupts on GPIOH and GPIOJ which do not -# exist on the LM3S6B96. Additional interrupt support can be -# disabled if desired to reduce memory footprint. -CONFIG_LM3S_DISABLE_GPIOA_IRQS=n -CONFIG_LM3S_DISABLE_GPIOB_IRQS=n -CONFIG_LM3S_DISABLE_GPIOC_IRQS=n -CONFIG_LM3S_DISABLE_GPIOD_IRQS=n -CONFIG_LM3S_DISABLE_GPIOE_IRQS=n -CONFIG_LM3S_DISABLE_GPIOF_IRQS=n -CONFIG_LM3S_DISABLE_GPIOG_IRQS=n +# Select LM3S Peripheral Support +# +CONFIG_LM3S_UART0=y +# CONFIG_LM3S_UART1 is not set +# CONFIG_SSI0_DISABLE is not set +CONFIG_SSI1_DISABLE=y +# CONFIG_LM3S_UART2 is not set +# CONFIG_LM3S_ETHERNET is not set + +# +# Disable GPIO Interrupts +# +# CONFIG_LM3S_DISABLE_GPIOA_IRQS is not set +# CONFIG_LM3S_DISABLE_GPIOB_IRQS is not set +# CONFIG_LM3S_DISABLE_GPIOC_IRQS is not set +# CONFIG_LM3S_DISABLE_GPIOD_IRQS is not set +# CONFIG_LM3S_DISABLE_GPIOE_IRQS is not set +# CONFIG_LM3S_DISABLE_GPIOF_IRQS is not set +# CONFIG_LM3S_DISABLE_GPIOG_IRQS is not set CONFIG_LM3S_DISABLE_GPIOH_IRQS=y CONFIG_LM3S_DISABLE_GPIOJ_IRQS=y # -# LM3S6965 specific serial device driver settings +# LM3S SSI Configuration # -CONFIG_LM3S_UART0=y -CONFIG_LM3S_UART1=n -CONFIG_LM3S_UART2=n -CONFIG_UART0_SERIAL_CONSOLE=y -CONFIG_UART1_SERIAL_CONSOLE=n -CONFIG_UART2_SERIAL_CONSOLE=n -CONFIG_UART0_TXBUFSIZE=256 -CONFIG_UART1_TXBUFSIZE=256 -CONFIG_UART2_TXBUFSIZE=256 -CONFIG_UART0_RXBUFSIZE=256 -CONFIG_UART1_RXBUFSIZE=256 -CONFIG_UART2_RXBUFSIZE=256 -CONFIG_UART0_BAUD=115200 -CONFIG_UART1_BAUD=115200 -CONFIG_UART2_BAUD=115200 -CONFIG_UART0_BITS=8 -CONFIG_UART1_BITS=8 -CONFIG_UART2_BITS=8 -CONFIG_UART0_PARITY=0 -CONFIG_UART1_PARITY=0 -CONFIG_UART2_PARITY=0 -CONFIG_UART0_2STOP=0 -CONFIG_UART1_2STOP=0 -CONFIG_UART2_2STOP=0 +CONFIG_SSI_POLLWAIT=y +CONFIG_SSI_TXLIMIT=4 # -# LM3S6965 specific SSI device driver settings +# Architecture Options # -CONFIG_SSI0_DISABLE=n -CONFIG_SSI1_DISABLE=y -CONFIG_SSI_POLLWAIT=y -#CONFIG_SSI_TXLIMIT=4 +# CONFIG_ARCH_NOINTC is not set +# CONFIG_ARCH_DMA is not set +CONFIG_ARCH_IRQPRIO=y +# CONFIG_CUSTOM_STACK is not set +# CONFIG_ADDRENV is not set +CONFIG_ARCH_STACKDUMP=y +# CONFIG_ENDIAN_BIG is not set # -# LM3S6965 specific serial device driver settings +# Board Settings # -CONFIG_LM3S_ETHERNET=n -CONFIG_LM3S_ETHLEDS=n -CONFIG_LM3S_BOARDMAC=y -CONFIG_LM3S_ETHHDUPLEX=n -CONFIG_LM3S_ETHNOAUTOCRC=n -CONFIG_LM3S_ETHNOPAD=n -CONFIG_LM3S_MULTICAST=n -CONFIG_LM3S_PROMISCUOUS=n -CONFIG_LM3S_BADCRC=n -CONFIG_LM3S_DUMPPACKET=n +CONFIG_DRAM_START=0x20000000 +CONFIG_DRAM_SIZE=65536 +CONFIG_ARCH_HAVE_INTERRUPTSTACK=y +CONFIG_ARCH_INTERRUPTSTACK=0 # -# General build options +# Boot options # -CONFIG_RRLOAD_BINARY=n -CONFIG_INTELHEX_BINARY=n -CONFIG_MOTOROLA_SREC=n -CONFIG_RAW_BINARY=y +# CONFIG_BOOT_RUNFROMEXTSRAM is not set +CONFIG_BOOT_RUNFROMFLASH=y +# CONFIG_BOOT_RUNFROMISRAM is not set +# CONFIG_BOOT_RUNFROMSDRAM is not set +# CONFIG_BOOT_COPYTORAM is not set # -# General SPI interface configuration +# Board Selection # -CONFIG_SPI_CMDDATA=y +CONFIG_ARCH_BOARD_LM3S6965EK=y +# CONFIG_ARCH_BOARD_CUSTOM is not set +CONFIG_ARCH_BOARD="lm3s6965-ek" # -# General OS setup +# Common Board Options # -CONFIG_USER_ENTRYPOINT="nx_main" -CONFIG_DEBUG=n -CONFIG_DEBUG_VERBOSE=n -CONFIG_DEBUG_SYMBOLS=n -CONFIG_DEBUG_GRAPHICS=n -CONFIG_LCD_RITDEBUG=n -CONFIG_MM_REGIONS=1 -CONFIG_ARCH_LOWPUTC=y +CONFIG_ARCH_HAVE_LEDS=y +CONFIG_ARCH_LEDS=y + +# +# Board-Specific Options +# + +# +# RTOS Features +# +CONFIG_MSEC_PER_TICK=10 CONFIG_RR_INTERVAL=200 -CONFIG_SCHED_INSTRUMENTATION=n +# CONFIG_SCHED_INSTRUMENTATION is not set CONFIG_TASK_NAME_SIZE=0 +# CONFIG_JULIAN_TIME is not set CONFIG_START_YEAR=2010 CONFIG_START_MONTH=5 CONFIG_START_DAY=12 -CONFIG_GREGORIAN_TIME=n -CONFIG_JULIAN_TIME=n CONFIG_DEV_CONSOLE=y -CONFIG_DEV_LOWCONSOLE=n -CONFIG_MUTEX_TYPES=n -CONFIG_PRIORITY_INHERITANCE=n -CONFIG_SEM_PREALLOCHOLDERS=0 -CONFIG_SEM_NNESTPRIO=0 -CONFIG_FDCLONE_DISABLE=n -CONFIG_FDCLONE_STDIO=n +# CONFIG_MUTEX_TYPES is not set +# CONFIG_PRIORITY_INHERITANCE is not set +# CONFIG_FDCLONE_DISABLE is not set +# CONFIG_FDCLONE_STDIO is not set CONFIG_SDCLONE_DISABLE=y -CONFIG_NXFLAT=n - -# -# The following can be used to disable categories of -# APIs supported by the OS. If the compiler supports -# weak functions, then it should not be necessary to -# disable functions unless you want to restrict usage -# of those APIs. -# -# There are certain dependency relationships in these -# features. -# -# o mq_notify logic depends on signals to awaken tasks -# waiting for queues to become full or empty. -# o pthread_condtimedwait() depends on signals to wake -# up waiting tasks. -# -CONFIG_DISABLE_CLOCK=n +# CONFIG_SCHED_WORKQUEUE is not set +# CONFIG_SCHED_WAITPID is not set +# CONFIG_SCHED_ATEXIT is not set +# CONFIG_SCHED_ONEXIT is not set +CONFIG_USER_ENTRYPOINT="nx_main" +CONFIG_DISABLE_OS_API=y +# CONFIG_DISABLE_CLOCK is not set CONFIG_DISABLE_POSIX_TIMERS=y -CONFIG_DISABLE_PTHREAD=n -CONFIG_DISABLE_SIGNALS=n -CONFIG_DISABLE_MQUEUE=n +# CONFIG_DISABLE_PTHREAD is not set +# CONFIG_DISABLE_SIGNALS is not set +# CONFIG_DISABLE_MQUEUE is not set CONFIG_DISABLE_MOUNTPOINT=y CONFIG_DISABLE_ENVIRON=y CONFIG_DISABLE_POLL=y # -# Misc libc settings -# -CONFIG_NOPRINTF_FIELDWIDTH=n - -# -# Allow for architecture optimized implementations -# -# The architecture can provide optimized versions of the -# following to improve system performance -# -CONFIG_ARCH_MEMCPY=n -CONFIG_ARCH_MEMCMP=n -CONFIG_ARCH_MEMMOVE=n -CONFIG_ARCH_MEMSET=n -CONFIG_ARCH_STRCMP=n -CONFIG_ARCH_STRCPY=n -CONFIG_ARCH_STRNCPY=n -CONFIG_ARCH_STRLEN=n -CONFIG_ARCH_STRNLEN=n -CONFIG_ARCH_BZERO=n - -# # Sizes of configurable things (0 disables) # CONFIG_MAX_TASKS=16 @@ -223,8 +216,6 @@ CONFIG_NPTHREAD_KEYS=4 CONFIG_NFILE_DESCRIPTORS=12 CONFIG_NFILE_STREAMS=12 CONFIG_NAME_MAX=32 -CONFIG_STDIO_BUFFER_SIZE=256 -CONFIG_NUNGET_CHARS=2 CONFIG_PREALLOC_MQ_MSGS=4 CONFIG_MQ_MAXMSGSIZE=32 CONFIG_MAX_WDOGPARMS=2 @@ -232,187 +223,382 @@ CONFIG_PREALLOC_WDOGS=4 CONFIG_PREALLOC_TIMERS=4 # -# Framebuffer driver options -CONFIG_FB_CMAP=n -CONFIG_FB_HWCURSOR=n -CONFIG_FB_HWCURSORIMAGE=n -#CONFIG_FB_HWCURSORSIZE -#CONFIG_FB_TRANSPARENCY +# Stack and heap information +# +CONFIG_IDLETHREAD_STACKSIZE=1024 +CONFIG_USERMAIN_STACKSIZE=2048 +CONFIG_PTHREAD_STACK_MIN=256 +CONFIG_PTHREAD_STACK_DEFAULT=2048 # -# Filesystem configuration +# Device Drivers +# +CONFIG_DEV_NULL=y +# CONFIG_DEV_ZERO is not set +# CONFIG_LOOP is not set +# CONFIG_RAMDISK is not set +# CONFIG_CAN is not set +# CONFIG_PWM is not set +# CONFIG_I2C is not set +CONFIG_SPI=y +# CONFIG_SPI_OWNBUS is not set +CONFIG_SPI_EXCHANGE=y +CONFIG_SPI_CMDDATA=y +# CONFIG_RTC is not set +# CONFIG_WATCHDOG is not set +# CONFIG_ANALOG is not set +# CONFIG_BCH is not set +# CONFIG_INPUT is not set +CONFIG_LCD=y +# CONFIG_LCD_NOGETRUN is not set +CONFIG_LCD_MAXCONTRAST=255 +CONFIG_LCD_MAXPOWER=1 +CONFIG_LCD_P14201=y +CONFIG_P14201_NINTERFACES=1 +CONFIG_P14201_SPIMODE=2 +CONFIG_P14201_FREQUENCY=3500000 +CONFIG_P14201_FRAMEBUFFER=y +# CONFIG_LCD_NOKIA6100 is not set +# CONFIG_LCD_UG9664HSWAG01 is not set +# CONFIG_LCD_UG2864AMBAG01 is not set +# CONFIG_LCD_SSD1289 is not set +CONFIG_LCD_LANDSCAPE=y +# CONFIG_LCD_PORTRAIT is not set +# CONFIG_LCD_RPORTRAIT is not set +# CONFIG_LCD_RLANDSCAPE is not set +# CONFIG_MMCSD is not set +# CONFIG_MTD is not set +# CONFIG_PIPES is not set +# CONFIG_PM is not set +# CONFIG_POWER is not set +# CONFIG_SENSORS is not set +# CONFIG_SERCOMM_CONSOLE is not set +CONFIG_SERIAL=y +# CONFIG_DEV_LOWCONSOLE is not set +# CONFIG_16550_UART is not set +CONFIG_ARCH_HAVE_UART0=y +CONFIG_MCU_SERIAL=y +CONFIG_STANDARD_SERIAL=y +CONFIG_UART0_SERIAL_CONSOLE=y +# CONFIG_NO_SERIAL_CONSOLE is not set + +# +# UART0 Configuration +# +CONFIG_UART0_RXBUFSIZE=256 +CONFIG_UART0_TXBUFSIZE=256 +CONFIG_UART0_BAUD=115200 +CONFIG_UART0_BITS=8 +CONFIG_UART0_PARITY=0 +CONFIG_UART0_2STOP=0 +# CONFIG_USBDEV is not set +# CONFIG_USBHOST is not set +# CONFIG_WIRELESS is not set + +# +# System Logging Device Options # -CONFIG_FS_FAT=n -CONFIG_FS_ROMFS=n # -# Maintain legacy build behavior (revisit) +# System Logging # +# CONFIG_RAMLOG is not set -CONFIG_MMCSD=y -CONFIG_MMCSD_SPI=y -CONFIG_MMCSD_SDIO=y +# +# Networking Support +# +# CONFIG_NET is not set # -# SPI-based MMC/SD driver +# File Systems # -CONFIG_MMCSD_NSLOTS=1 -CONFIG_MMCSD_READONLY=n -CONFIG_MMCSD_SPICLOCK=12500000 # -# TCP/IP and UDP support via uIP +# File system configuration # -CONFIG_NET=n -CONFIG_NET_IPv6=n -CONFIG_NSOCKET_DESCRIPTORS=0 -CONFIG_NET_SOCKOPTS=y -CONFIG_NET_BUFSIZE=420 -CONFIG_NET_TCP=n -CONFIG_NET_TCP_CONNS=40 -CONFIG_NET_MAX_LISTENPORTS=40 -CONFIG_NET_UDP=n -CONFIG_NET_UDP_CHECKSUMS=y -#CONFIG_NET_UDP_CONNS=10 -CONFIG_NET_ICMP=n -CONFIG_NET_ICMP_PING=n -#CONFIG_NET_PINGADDRCONF=0 -CONFIG_NET_STATISTICS=y -#CONFIG_NET_RECEIVE_WINDOW= -#CONFIG_NET_ARPTAB_SIZE=8 -CONFIG_NET_BROADCAST=n +# CONFIG_FS_RAMMAP is not set # -# UIP Network Utilities +# System Logging # -CONFIG_NET_DHCP_LIGHT=n -CONFIG_NET_RESOLV_ENTRIES=4 +# CONFIG_SYSLOG is not set # -# Graphics related configuration settings +# Graphics Support # CONFIG_NX=y -CONFIG_NX_MULTIUSER=n +CONFIG_NX_LCDDRIVER=y CONFIG_NX_NPLANES=1 +# CONFIG_NX_WRITEONLY is not set + +# +# Supported Pixel Depths +# CONFIG_NX_DISABLE_1BPP=y CONFIG_NX_DISABLE_2BPP=y -CONFIG_NX_DISABLE_4BPP=n +# CONFIG_NX_DISABLE_4BPP is not set CONFIG_NX_DISABLE_8BPP=y CONFIG_NX_DISABLE_16BPP=y CONFIG_NX_DISABLE_24BPP=y CONFIG_NX_DISABLE_32BPP=y CONFIG_NX_PACKEDMSFIRST=y -CONFIG_NX_LCDDRIVER=y -CONFIG_LCD_MAXPOWER=1 -CONFIG_LCD_MAXCONTRAST=255 + +# +# Input Devices +# CONFIG_NX_MOUSE=y CONFIG_NX_KBD=y -#CONFIG_NXTK_BORDERWIDTH=4 -CONFIG_NXTK_BORDERCOLOR1=8 -CONFIG_NXTK_BORDERCOLOR2=4 -CONFIG_NXTK_AUTORAISE=n -CONFIG_NXFONT_SANS23X27=y + +# +# Framed Window Borders +# +CONFIG_NXTK_BORDERWIDTH=4 +CONFIG_NXTK_BORDERCOLOR1=0x08 +CONFIG_NXTK_BORDERCOLOR2=0x04 +CONFIG_NXTK_BORDERCOLOR3=0 +# CONFIG_NXTK_AUTORAISE is not set + +# +# Font Selections +# CONFIG_NXFONTS_CHARBITS=7 -CONFIG_NX_BLOCKING=y -CONFIG_NX_MXSERVERMSGS=32 -CONFIG_NX_MXCLIENTMSGS=16 +# CONFIG_NXFONT_MONO5X8 is not set +# CONFIG_NXFONT_SANS17X22 is not set +# CONFIG_NXFONT_SANS20X26 is not set +CONFIG_NXFONT_SANS23X27=y +# CONFIG_NXFONT_SANS22X29 is not set +# CONFIG_NXFONT_SANS28X37 is not set +# CONFIG_NXFONT_SANS39X48 is not set +# CONFIG_NXFONT_SANS17X23B is not set +# CONFIG_NXFONT_SANS20X27B is not set +# CONFIG_NXFONT_SANS22X29B is not set +# CONFIG_NXFONT_SANS28X37B is not set +# CONFIG_NXFONT_SANS40X49B is not set +# CONFIG_NXFONT_SERIF22X29 is not set +# CONFIG_NXFONT_SERIF29X37 is not set +# CONFIG_NXFONT_SERIF38X48 is not set +# CONFIG_NXFONT_SERIF22X28B is not set +# CONFIG_NXFONT_SERIF27X38B is not set +# CONFIG_NXFONT_SERIF38X49B is not set +# CONFIG_NXCONSOLE is not set # -# RiT P14201 OLED Driver Configuration +# NX Multi-user only options # -CONFIG_LCD_P14201=y -CONFIG_P14201_SPIMODE=2 -CONFIG_P14201_FREQUENCY=3500000 -CONFIG_P14201_NINTERFACES=1 -CONFIG_P14201_FRAMEBUFFER=y +# CONFIG_NX_MULTIUSER is not set + +# +# Memory Management +# +# CONFIG_MM_SMALL is not set +CONFIG_MM_REGIONS=1 +# CONFIG_GRAN is not set # -# Settings for examples/uip +# Binary Formats # -CONFIG_EXAMPLES_UIP_IPADDR=0x0a000002 -CONFIG_EXAMPLES_UIP_DRIPADDR=0x0a000001 -CONFIG_EXAMPLES_UIP_NETMASK=0xffffff00 -CONFIG_EXAMPLES_UIP_DHCPC=n +# CONFIG_BINFMT_DISABLE is not set +# CONFIG_NXFLAT is not set +# CONFIG_ELF is not set +# CONFIG_PIC is not set +# CONFIG_SYMTAB_ORDEREDBYNAME is not set # -# Settings for examples/nettest -CONFIG_EXAMPLES_NETTEST_SERVER=n -CONFIG_EXAMPLES_NETTEST_PERFORMANCE=n -CONFIG_EXAMPLES_NETTEST_NOMAC=n -CONFIG_EXAMPLES_NETTEST_IPADDR=0x0a000002 -CONFIG_EXAMPLES_NETTEST_DRIPADDR=0x0a000001 -CONFIG_EXAMPLES_NETTEST_NETMASK=0xffffff00 -CONFIG_EXAMPLES_NETTEST_CLIENTIP=0x0a000001 +# Library Routines +# # -# Settings for examples/ostest +# Standard C Library Options # -CONFIG_EXAMPLES_OSTEST_LOOPS=1 -CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048 -CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3 +CONFIG_STDIO_BUFFER_SIZE=256 +CONFIG_STDIO_LINEBUFFER=y +CONFIG_NUNGET_CHARS=2 +# CONFIG_LIBM is not set +# CONFIG_NOPRINTF_FIELDWIDTH is not set +# CONFIG_LIBC_FLOATINGPOINT is not set +# CONFIG_EOL_IS_CR is not set +# CONFIG_EOL_IS_LF is not set +# CONFIG_EOL_IS_BOTH_CRLF is not set +CONFIG_EOL_IS_EITHER_CRLF=y +# CONFIG_LIBC_STRERROR is not set +# CONFIG_LIBC_PERROR_STDOUT is not set +CONFIG_ARCH_LOWPUTC=y +CONFIG_LIB_SENDFILE_BUFSIZE=512 +# CONFIG_ARCH_ROMGETC is not set +# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set # -# Settings for apps/nshlib +# Non-standard Helper Functions # -CONFIG_NSH_FILEIOSIZE=512 -CONFIG_NSH_STRERROR=n -CONFIG_NSH_LINELEN=64 -CONFIG_NSH_NESTDEPTH=3 -CONFIG_NSH_DISABLESCRIPT=n -CONFIG_NSH_DISABLEBG=n -CONFIG_NSH_ROMFSETC=n -CONFIG_NSH_CONSOLE=y -CONFIG_NSH_TELNET=n -CONFIG_NSH_ARCHINIT=n -CONFIG_NSH_IOBUFFER_SIZE=512 -CONFIG_NSH_DHCPC=n -CONFIG_NSH_NOMAC=n -CONFIG_NSH_IPADDR=0x0a000002 -CONFIG_NSH_DRIPADDR=0x0a000001 -CONFIG_NSH_NETMASK=0xffffff00 -CONFIG_NSH_ROMFSMOUNTPT="/etc" -CONFIG_NSH_INITSCRIPT="init.d/rcS" -CONFIG_NSH_ROMFSDEVNO=0 -CONFIG_NSH_ROMFSSECTSIZE=64 -CONFIG_NSH_FATDEVNO=1 -CONFIG_NSH_FATSECTSIZE=512 -CONFIG_NSH_FATNSECTORS=1024 -CONFIG_NSH_FATMOUNTPT="/tmp" +CONFIG_LIB_KBDCODEC=y # -# Architecture-specific NSH options +# Basic CXX Support # -CONFIG_NSH_MMCSDSPIPORTNO=0 -CONFIG_NSH_MMCSDSLOTNO=0 -CONFIG_NSH_MMCSDMINOR=0 +# CONFIG_C99_BOOL8 is not set +# CONFIG_HAVE_CXX is not set # -# Settings for examples/nx +# Application Configuration # + +# +# Built-In Applications +# +# CONFIG_BUILTIN is not set + +# +# Examples +# +# CONFIG_EXAMPLES_BUTTONS is not set +# CONFIG_EXAMPLES_CAN is not set +# CONFIG_EXAMPLES_CDCACM is not set +# CONFIG_EXAMPLES_COMPOSITE is not set +# CONFIG_EXAMPLES_DHCPD is not set +# CONFIG_EXAMPLES_ELF is not set +# CONFIG_EXAMPLES_FTPC is not set +# CONFIG_EXAMPLES_FTPD is not set +# CONFIG_EXAMPLES_HELLO is not set +# CONFIG_EXAMPLES_HELLOXX is not set +# CONFIG_EXAMPLES_JSON is not set +# CONFIG_EXAMPLES_HIDKBD is not set +# CONFIG_EXAMPLES_KEYPADTEST is not set +# CONFIG_EXAMPLES_IGMP is not set +# CONFIG_EXAMPLES_LCDRW is not set +# CONFIG_EXAMPLES_MM is not set +# CONFIG_EXAMPLES_MOUNT is not set +# CONFIG_EXAMPLES_MODBUS is not set +# CONFIG_EXAMPLES_NETTEST is not set +# CONFIG_EXAMPLES_NSH is not set +# CONFIG_EXAMPLES_NULL is not set +CONFIG_EXAMPLES_NX=y CONFIG_EXAMPLES_NX_VPLANE=0 CONFIG_EXAMPLES_NX_DEVNO=0 -CONFIG_EXAMPLES_NX_BGCOLOR=2 -CONFIG_EXAMPLES_NX_COLOR1=10 -CONFIG_EXAMPLES_NX_COLOR2=12 -CONFIG_EXAMPLES_NX_TBCOLOR=8 -CONFIG_EXAMPLES_NX_FONTCOLOR=0 +# CONFIG_EXAMPLES_NX_DEFAULT_COLORS is not set +CONFIG_EXAMPLES_NX_BGCOLOR=0x02 +CONFIG_EXAMPLES_NX_COLOR1=0x0a +CONFIG_EXAMPLES_NX_COLOR2=0x0c +CONFIG_EXAMPLES_NX_TBCOLOR=0x08 +CONFIG_EXAMPLES_NX_FONTCOLOR=0x00 +CONFIG_EXAMPLES_NX_DEFAULT_FONT=y CONFIG_EXAMPLES_NX_BPP=4 -CONFIG_EXAMPLES_NX_RAWWINDOWS=n -CONFIG_EXAMPLES_NX_STACKSIZE=2048 -CONFIG_EXAMPLES_NX_CLIENTPRIO=80 -CONFIG_EXAMPLES_NX_SERVERPRIO=120 -CONFIG_EXAMPLES_NX_NOTIFYSIGNO=4 +# CONFIG_EXAMPLES_NX_RAWWINDOWS is not set CONFIG_EXAMPLES_NX_EXTERNINIT=y +# CONFIG_EXAMPLES_NXCONSOLE is not set +# CONFIG_EXAMPLES_NXFFS is not set +# CONFIG_EXAMPLES_NXFLAT is not set +# CONFIG_EXAMPLES_NXHELLO is not set +# CONFIG_EXAMPLES_NXIMAGE is not set +# CONFIG_EXAMPLES_NXLINES is not set +# CONFIG_EXAMPLES_NXTEXT is not set +# CONFIG_EXAMPLES_OSTEST is not set +# CONFIG_EXAMPLES_PASHELLO is not set +# CONFIG_EXAMPLES_PIPE is not set +# CONFIG_EXAMPLES_POLL is not set +# CONFIG_EXAMPLES_QENCODER is not set +# CONFIG_EXAMPLES_RGMP is not set +# CONFIG_EXAMPLES_ROMFS is not set +# CONFIG_EXAMPLES_SENDMAIL is not set +# CONFIG_EXAMPLES_SERLOOP is not set +# CONFIG_EXAMPLES_TELNETD is not set +# CONFIG_EXAMPLES_THTTPD is not set +# CONFIG_EXAMPLES_TIFF is not set +# CONFIG_EXAMPLES_TOUCHSCREEN is not set +# CONFIG_EXAMPLES_UDP is not set +# CONFIG_EXAMPLES_UIP is not set +# CONFIG_EXAMPLES_USBSERIAL is not set +# CONFIG_EXAMPLES_USBMSC is not set +# CONFIG_EXAMPLES_USBTERM is not set +# CONFIG_EXAMPLES_WATCHDOG is not set # -# Stack and heap information +# Interpreters # -CONFIG_BOOT_RUNFROMFLASH=n -CONFIG_BOOT_COPYTORAM=n -CONFIG_CUSTOM_STACK=n -CONFIG_IDLETHREAD_STACKSIZE=1024 -CONFIG_USERMAIN_STACKSIZE=2048 -CONFIG_PTHREAD_STACK_MIN=256 -CONFIG_PTHREAD_STACK_DEFAULT=2048 -CONFIG_HEAP_BASE= -CONFIG_HEAP_SIZE= + +# +# Interpreters +# +# CONFIG_INTERPRETERS_FICL is not set +# CONFIG_INTERPRETERS_PCODE is not set + +# +# Network Utilities +# + +# +# Networking Utilities +# +# CONFIG_NETUTILS_CODECS is not set +# CONFIG_NETUTILS_DHCPC is not set +# CONFIG_NETUTILS_DHCPD is not set +# CONFIG_NETUTILS_FTPC is not set +# CONFIG_NETUTILS_FTPD is not set +# CONFIG_NETUTILS_JSON is not set +# CONFIG_NETUTILS_RESOLV is not set +# CONFIG_NETUTILS_SMTP is not set +# CONFIG_NETUTILS_TELNETD is not set +# CONFIG_NETUTILS_TFTPC is not set +# CONFIG_NETUTILS_THTTPD is not set +# CONFIG_NETUTILS_UIPLIB is not set +# CONFIG_NETUTILS_WEBCLIENT is not set + +# +# ModBus +# + +# +# FreeModbus +# +# CONFIG_MODBUS is not set + +# +# NSH Library +# +# CONFIG_NSH_LIBRARY is not set + +# +# NxWidgets/NxWM +# + +# +# System NSH Add-Ons +# + +# +# Custom Free Memory Command +# +# CONFIG_SYSTEM_FREE is not set + +# +# I2C tool +# + +# +# FLASH Program Installation +# +# CONFIG_SYSTEM_INSTALL is not set + +# +# readline() +# +# CONFIG_SYSTEM_READLINE is not set + +# +# Power Off +# +# CONFIG_SYSTEM_POWEROFF is not set + +# +# RAMTRON +# +# CONFIG_SYSTEM_RAMTRON is not set + +# +# SD Card +# +# CONFIG_SYSTEM_SDCARD is not set + +# +# Sysinfo +# +# CONFIG_SYSTEM_SYSINFO is not set diff --git a/nuttx/configs/lm3s6965-ek/ostest/appconfig b/nuttx/configs/lm3s6965-ek/ostest/appconfig deleted file mode 100644 index dabf1f2b4..000000000 --- a/nuttx/configs/lm3s6965-ek/ostest/appconfig +++ /dev/null @@ -1,39 +0,0 @@ -############################################################################ -# configs/lm3s6965-ek/ostest/appconfig -# -# Copyright (C) 2011 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt <gnutt@nuttx.org> -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ - -# Path to example in apps/examples containing the user_start entry point - -CONFIGURED_APPS += examples/ostest - diff --git a/nuttx/configs/lm3s6965-ek/ostest/defconfig b/nuttx/configs/lm3s6965-ek/ostest/defconfig index fcee44433..d1168ad45 100755 --- a/nuttx/configs/lm3s6965-ek/ostest/defconfig +++ b/nuttx/configs/lm3s6965-ek/ostest/defconfig @@ -1,211 +1,213 @@ -############################################################################ -# configs/lm3s6965-ek/ostest/defconfig -# -# Copyright (C) 2010 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt <gnutt@nuttx.org> -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ -# -# Architecture Selection # -CONFIG_ARCH="arm" +# Automatically generated file; DO NOT EDIT. +# Nuttx/ Configuration +# +CONFIG_NUTTX_NEWCONFIG=y + +# +# Build Setup +# +# CONFIG_EXPERIMENTAL is not set +CONFIG_HOST_LINUX=y +# CONFIG_HOST_OSX is not set +# CONFIG_HOST_WINDOWS is not set +# CONFIG_HOST_OTHER is not set + +# +# Build Configuration +# +# CONFIG_APPS_DIR="../apps" +# CONFIG_BUILD_2PASS is not set + +# +# Binary Output Formats +# +# CONFIG_RRLOAD_BINARY is not set +# CONFIG_INTELHEX_BINARY is not set +# CONFIG_MOTOROLA_SREC is not set +CONFIG_RAW_BINARY=y + +# +# Customize Header Files +# +# CONFIG_ARCH_STDBOOL_H is not set +# CONFIG_ARCH_MATH_H is not set +# CONFIG_ARCH_FLOAT_H is not set +# CONFIG_ARCH_STDARG_H is not set + +# +# Debug Options +# +# CONFIG_DEBUG is not set +# CONFIG_DEBUG_SYMBOLS is not set + +# +# System Type +# +# CONFIG_ARCH_8051 is not set CONFIG_ARCH_ARM=y +# CONFIG_ARCH_AVR is not set +# CONFIG_ARCH_HC is not set +# CONFIG_ARCH_MIPS is not set +# CONFIG_ARCH_RGMP is not set +# CONFIG_ARCH_SH is not set +# CONFIG_ARCH_SIM is not set +# CONFIG_ARCH_X86 is not set +# CONFIG_ARCH_Z16 is not set +# CONFIG_ARCH_Z80 is not set +CONFIG_ARCH="arm" + +# +# ARM Options +# +# CONFIG_ARCH_CHIP_C5471 is not set +# CONFIG_ARCH_CHIP_CALYPSO is not set +# CONFIG_ARCH_CHIP_DM320 is not set +# CONFIG_ARCH_CHIP_IMX is not set +# CONFIG_ARCH_CHIP_KINETIS is not set +CONFIG_ARCH_CHIP_LM3S=y +# CONFIG_ARCH_CHIP_LPC17XX is not set +# CONFIG_ARCH_CHIP_LPC214X is not set +# CONFIG_ARCH_CHIP_LPC2378 is not set +# CONFIG_ARCH_CHIP_LPC31XX is not set +# CONFIG_ARCH_CHIP_LPC43XX is not set +# CONFIG_ARCH_CHIP_SAM3U is not set +# CONFIG_ARCH_CHIP_STM32 is not set +# CONFIG_ARCH_CHIP_STR71X is not set CONFIG_ARCH_CORTEXM3=y +CONFIG_ARCH_FAMILY="armv7-m" CONFIG_ARCH_CHIP="lm3s" -CONFIG_ARCH_CHIP_LM3S=y -CONFIG_ARCH_CHIP_LM3S6965=y -CONFIG_ARCH_BOARD="lm3s6965-ek" -CONFIG_ARCH_BOARD_LM3S6965EK=y +CONFIG_ARCH_HAVE_MPU=y +# CONFIG_ARMV7M_MPU is not set CONFIG_BOARD_LOOPSPERMSEC=4531 -CONFIG_DRAM_SIZE=65536 -CONFIG_DRAM_START=0x20000000 -CONFIG_ARCH_IRQPRIO=y -CONFIG_ARCH_INTERRUPTSTACK=0 -CONFIG_ARCH_STACKDUMP=y -CONFIG_ARCH_LEDS=y -CONFIG_ARCH_CALIBRATION=n +# CONFIG_ARCH_CALIBRATION is not set # -# Identify toolchain and linker options +# ARMV7M Configuration Options # -CONFIG_LM3S_CODESOURCERYW=n -CONFIG_LM3S_CODESOURCERYL=n -CONFIG_LM3S_DEVKITARM=n -CONFIG_LM3S_BUILDROOT=y -CONFIG_LM3S_DFU=y +CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y +# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set +# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set +# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set # -# Disable support for interrupts on GPIOH and GPIOJ which do not -# exist on the LM3S6B96. Additional interrupt support can be -# disabled if desired to reduce memory footprint. -CONFIG_LM3S_DISABLE_GPIOA_IRQS=n -CONFIG_LM3S_DISABLE_GPIOB_IRQS=n -CONFIG_LM3S_DISABLE_GPIOC_IRQS=n -CONFIG_LM3S_DISABLE_GPIOD_IRQS=n -CONFIG_LM3S_DISABLE_GPIOE_IRQS=n -CONFIG_LM3S_DISABLE_GPIOF_IRQS=n -CONFIG_LM3S_DISABLE_GPIOG_IRQS=n -CONFIG_LM3S_DISABLE_GPIOH_IRQS=y -CONFIG_LM3S_DISABLE_GPIOJ_IRQS=y +# LM3S Configuration Options +# +# CONFIG_ARCH_CHIP_LM3S6918 is not set +# CONFIG_ARCH_CHIP_LM3S9B96 is not set +# CONFIG_ARCH_CHIP_LM3S6432 is not set +CONFIG_ARCH_CHIP_LM3S6965=y +# CONFIG_ARCH_CHIP_LM3S8962 is not set +# CONFIG_LM3S_REVA2 is not set +CONFIG_LM3S_DFU=y # -# LM3S6965 specific serial device driver settings +# Select LM3S Peripheral Support # CONFIG_LM3S_UART0=y -CONFIG_LM3S_UART1=n -CONFIG_LM3S_UART2=n -CONFIG_UART0_SERIAL_CONSOLE=y -CONFIG_UART1_SERIAL_CONSOLE=n -CONFIG_UART2_SERIAL_CONSOLE=n -CONFIG_UART0_TXBUFSIZE=256 -CONFIG_UART1_TXBUFSIZE=256 -CONFIG_UART2_TXBUFSIZE=256 -CONFIG_UART0_RXBUFSIZE=256 -CONFIG_UART1_RXBUFSIZE=256 -CONFIG_UART2_RXBUFSIZE=256 -CONFIG_UART0_BAUD=115200 -CONFIG_UART1_BAUD=115200 -CONFIG_UART2_BAUD=115200 -CONFIG_UART0_BITS=8 -CONFIG_UART1_BITS=8 -CONFIG_UART2_BITS=8 -CONFIG_UART0_PARITY=0 -CONFIG_UART1_PARITY=0 -CONFIG_UART2_PARITY=0 -CONFIG_UART0_2STOP=0 -CONFIG_UART1_2STOP=0 -CONFIG_UART2_2STOP=0 +# CONFIG_LM3S_UART1 is not set +# CONFIG_SSI0_DISABLE is not set +CONFIG_SSI1_DISABLE=y +# CONFIG_LM3S_UART2 is not set +# CONFIG_LM3S_ETHERNET is not set # -# LM3S6965 specific SSI device driver settings +# Disable GPIO Interrupts # -CONFIG_SSI0_DISABLE=n -CONFIG_SSI1_DISABLE=y -CONFIG_SSI_POLLWAIT=y -#CONFIG_SSI_TXLIMIT=4 +# CONFIG_LM3S_DISABLE_GPIOA_IRQS is not set +# CONFIG_LM3S_DISABLE_GPIOB_IRQS is not set +# CONFIG_LM3S_DISABLE_GPIOC_IRQS is not set +# CONFIG_LM3S_DISABLE_GPIOD_IRQS is not set +# CONFIG_LM3S_DISABLE_GPIOE_IRQS is not set +# CONFIG_LM3S_DISABLE_GPIOF_IRQS is not set +# CONFIG_LM3S_DISABLE_GPIOG_IRQS is not set +CONFIG_LM3S_DISABLE_GPIOH_IRQS=y +CONFIG_LM3S_DISABLE_GPIOJ_IRQS=y # -# LM3S6965 specific serial device driver settings +# LM3S SSI Configuration # -CONFIG_LM3S_ETHERNET=n -CONFIG_LM3S_ETHLEDS=n -CONFIG_LM3S_BOARDMAC=y -CONFIG_LM3S_ETHHDUPLEX=n -CONFIG_LM3S_ETHNOAUTOCRC=n -CONFIG_LM3S_ETHNOPAD=n -CONFIG_LM3S_MULTICAST=n -CONFIG_LM3S_PROMISCUOUS=n -CONFIG_LM3S_BADCRC=n -CONFIG_LM3S_DUMPPACKET=n +CONFIG_SSI_POLLWAIT=y +CONFIG_SSI_TXLIMIT=4 +# CONFIG_SDIO_DMA is not set +# CONFIG_SDIO_WIDTH_D1_ONLY is not set # -# General build options +# Architecture Options # -CONFIG_RRLOAD_BINARY=n -CONFIG_INTELHEX_BINARY=n -CONFIG_MOTOROLA_SREC=n -CONFIG_RAW_BINARY=y +# CONFIG_ARCH_NOINTC is not set +# CONFIG_ARCH_DMA is not set +CONFIG_ARCH_IRQPRIO=y +# CONFIG_CUSTOM_STACK is not set +# CONFIG_ADDRENV is not set +CONFIG_ARCH_STACKDUMP=y +# CONFIG_ENDIAN_BIG is not set # -# General OS setup +# Board Settings # -CONFIG_USER_ENTRYPOINT="ostest_main" -CONFIG_DEBUG=n -CONFIG_DEBUG_VERBOSE=n -CONFIG_DEBUG_SYMBOLS=n -CONFIG_MM_REGIONS=1 -CONFIG_ARCH_LOWPUTC=y -CONFIG_RR_INTERVAL=200 -CONFIG_SCHED_INSTRUMENTATION=n -CONFIG_TASK_NAME_SIZE=0 -CONFIG_START_YEAR=2010 -CONFIG_START_MONTH=5 -CONFIG_START_DAY=6 -CONFIG_GREGORIAN_TIME=n -CONFIG_JULIAN_TIME=n -CONFIG_DEV_CONSOLE=y -CONFIG_DEV_LOWCONSOLE=y -CONFIG_MUTEX_TYPES=n -CONFIG_PRIORITY_INHERITANCE=n -CONFIG_SEM_PREALLOCHOLDERS=0 -CONFIG_SEM_NNESTPRIO=0 -CONFIG_FDCLONE_DISABLE=n -CONFIG_FDCLONE_STDIO=n -CONFIG_SDCLONE_DISABLE=y -CONFIG_NXFLAT=n +CONFIG_DRAM_START=0x20000000 +CONFIG_DRAM_SIZE=65536 +CONFIG_ARCH_HAVE_INTERRUPTSTACK=y +CONFIG_ARCH_INTERRUPTSTACK=0 # -# The following can be used to disable categories of -# APIs supported by the OS. If the compiler supports -# weak functions, then it should not be necessary to -# disable functions unless you want to restrict usage -# of those APIs. +# Boot options # -# There are certain dependency relationships in these -# features. +# CONFIG_BOOT_RUNFROMEXTSRAM is not set +CONFIG_BOOT_RUNFROMFLASH=y +# CONFIG_BOOT_RUNFROMISRAM is not set +# CONFIG_BOOT_RUNFROMSDRAM is not set +# CONFIG_BOOT_COPYTORAM is not set + # -# o mq_notify logic depends on signals to awaken tasks -# waiting for queues to become full or empty. -# o pthread_condtimedwait() depends on signals to wake -# up waiting tasks. +# Board Selection # -CONFIG_DISABLE_CLOCK=n -CONFIG_DISABLE_POSIX_TIMERS=n -CONFIG_DISABLE_PTHREAD=n -CONFIG_DISABLE_SIGNALS=n -CONFIG_DISABLE_MQUEUE=n -CONFIG_DISABLE_MOUNTPOINT=y -CONFIG_DISABLE_ENVIRON=y -CONFIG_DISABLE_POLL=y +CONFIG_ARCH_BOARD_LM3S6965EK=y +# CONFIG_ARCH_BOARD_CUSTOM is not set +CONFIG_ARCH_BOARD="lm3s6965-ek" # -# Misc libc settings +# Common Board Options # -CONFIG_NOPRINTF_FIELDWIDTH=n +CONFIG_ARCH_HAVE_LEDS=y +CONFIG_ARCH_LEDS=y # -# Allow for architecture optimized implementations +# Board-Specific Options # -# The architecture can provide optimized versions of the -# following to improve system performance + +# +# RTOS Features # -CONFIG_ARCH_MEMCPY=n -CONFIG_ARCH_MEMCMP=n -CONFIG_ARCH_MEMMOVE=n -CONFIG_ARCH_MEMSET=n -CONFIG_ARCH_STRCMP=n -CONFIG_ARCH_STRCPY=n -CONFIG_ARCH_STRNCPY=n -CONFIG_ARCH_STRLEN=n -CONFIG_ARCH_STRNLEN=n -CONFIG_ARCH_BZERO=n +CONFIG_MSEC_PER_TICK=10 +CONFIG_RR_INTERVAL=200 +# CONFIG_SCHED_INSTRUMENTATION is not set +CONFIG_TASK_NAME_SIZE=0 +# CONFIG_JULIAN_TIME is not set +CONFIG_START_YEAR=2010 +CONFIG_START_MONTH=5 +CONFIG_START_DAY=6 +CONFIG_DEV_CONSOLE=y +# CONFIG_MUTEX_TYPES is not set +# CONFIG_PRIORITY_INHERITANCE is not set +# CONFIG_FDCLONE_DISABLE is not set +# CONFIG_FDCLONE_STDIO is not set +CONFIG_SDCLONE_DISABLE=y +# CONFIG_SCHED_WORKQUEUE is not set +# CONFIG_SCHED_WAITPID is not set +# CONFIG_SCHED_ATEXIT is not set +# CONFIG_SCHED_ONEXIT is not set +CONFIG_USER_ENTRYPOINT="ostest_main" +CONFIG_DISABLE_OS_API=y +# CONFIG_DISABLE_CLOCK is not set +# CONFIG_DISABLE_POSIX_TIMERS is not set +# CONFIG_DISABLE_PTHREAD is not set +# CONFIG_DISABLE_SIGNALS is not set +# CONFIG_DISABLE_MQUEUE is not set +CONFIG_DISABLE_MOUNTPOINT=y +CONFIG_DISABLE_ENVIRON=y +CONFIG_DISABLE_POLL=y # # Sizes of configurable things (0 disables) @@ -216,8 +218,6 @@ CONFIG_NPTHREAD_KEYS=4 CONFIG_NFILE_DESCRIPTORS=8 CONFIG_NFILE_STREAMS=8 CONFIG_NAME_MAX=32 -CONFIG_STDIO_BUFFER_SIZE=256 -CONFIG_NUNGET_CHARS=2 CONFIG_PREALLOC_MQ_MSGS=4 CONFIG_MQ_MAXMSGSIZE=32 CONFIG_MAX_WDOGPARMS=2 @@ -225,123 +225,306 @@ CONFIG_PREALLOC_WDOGS=4 CONFIG_PREALLOC_TIMERS=4 # -# Filesystem configuration +# Stack and heap information # -CONFIG_FS_FAT=n -CONFIG_FS_ROMFS=n +CONFIG_IDLETHREAD_STACKSIZE=1024 +CONFIG_USERMAIN_STACKSIZE=2048 +CONFIG_PTHREAD_STACK_MIN=256 +CONFIG_PTHREAD_STACK_DEFAULT=2048 # -# Maintain legacy build behavior (revisit) -# - +# Device Drivers +# +CONFIG_DEV_NULL=y +# CONFIG_DEV_ZERO is not set +# CONFIG_LOOP is not set +# CONFIG_RAMDISK is not set +# CONFIG_CAN is not set +# CONFIG_PWM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +# CONFIG_RTC is not set +# CONFIG_WATCHDOG is not set +# CONFIG_ANALOG is not set +# CONFIG_BCH is not set +# CONFIG_INPUT is not set +# CONFIG_LCD is not set CONFIG_MMCSD=y +CONFIG_MMCSD_NSLOTS=1 +# CONFIG_MMCSD_READONLY is not set +# CONFIG_MMCSD_MULTIBLOCK_DISABLE is not set +CONFIG_MMCSD_MMCSUPPORT=y +CONFIG_MMCSD_HAVECARDDETECT=y CONFIG_MMCSD_SPI=y +CONFIG_MMCSD_SPICLOCK=12500000 CONFIG_MMCSD_SDIO=y +# CONFIG_SDIO_MUXBUS is not set +# CONFIG_MTD is not set +# CONFIG_PIPES is not set +# CONFIG_PM is not set +# CONFIG_POWER is not set +# CONFIG_SENSORS is not set +# CONFIG_SERCOMM_CONSOLE is not set +CONFIG_SERIAL=y +CONFIG_DEV_LOWCONSOLE=y +# CONFIG_16550_UART is not set +CONFIG_ARCH_HAVE_UART0=y +CONFIG_MCU_SERIAL=y +CONFIG_UART0_SERIAL_CONSOLE=y +# CONFIG_NO_SERIAL_CONSOLE is not set # -# SPI-based MMC/SD driver +# UART0 Configuration +# +CONFIG_UART0_RXBUFSIZE=256 +CONFIG_UART0_TXBUFSIZE=256 +CONFIG_UART0_BAUD=115200 +CONFIG_UART0_BITS=8 +CONFIG_UART0_PARITY=0 +CONFIG_UART0_2STOP=0 +# CONFIG_USBDEV is not set +# CONFIG_USBHOST is not set +# CONFIG_WIRELESS is not set + +# +# System Logging Device Options +# + +# +# System Logging +# +# CONFIG_RAMLOG is not set + +# +# Networking Support +# +# CONFIG_NET is not set + +# +# File Systems # -CONFIG_MMCSD_NSLOTS=1 -CONFIG_MMCSD_READONLY=n -CONFIG_MMCSD_SPICLOCK=12500000 # -# TCP/IP and UDP support via uIP +# File system configuration # -CONFIG_NET=n -CONFIG_NET_IPv6=n -CONFIG_NSOCKET_DESCRIPTORS=0 -CONFIG_NET_SOCKOPTS=y -CONFIG_NET_BUFSIZE=420 -CONFIG_NET_TCP=n -CONFIG_NET_TCP_CONNS=40 -CONFIG_NET_MAX_LISTENPORTS=40 -CONFIG_NET_UDP=n -CONFIG_NET_UDP_CHECKSUMS=y -#CONFIG_NET_UDP_CONNS=10 -CONFIG_NET_ICMP=n -CONFIG_NET_ICMP_PING=n -#CONFIG_NET_PINGADDRCONF=0 -CONFIG_NET_STATISTICS=y -#CONFIG_NET_RECEIVE_WINDOW= -#CONFIG_NET_ARPTAB_SIZE=8 -CONFIG_NET_BROADCAST=n +# CONFIG_FS_RAMMAP is not set # -# UIP Network Utilities +# System Logging # -CONFIG_NET_DHCP_LIGHT=n -CONFIG_NET_RESOLV_ENTRIES=4 +# CONFIG_SYSLOG is not set # -# Settings for examples/uip +# Graphics Support # -CONFIG_EXAMPLES_UIP_IPADDR=0x0a000002 -CONFIG_EXAMPLES_UIP_DRIPADDR=0x0a000001 -CONFIG_EXAMPLES_UIP_NETMASK=0xffffff00 -CONFIG_EXAMPLES_UIP_DHCPC=n +# CONFIG_NX is not set # -# Settings for examples/nettest -CONFIG_EXAMPLES_NETTEST_SERVER=n -CONFIG_EXAMPLES_NETTEST_PERFORMANCE=n -CONFIG_EXAMPLES_NETTEST_NOMAC=n -CONFIG_EXAMPLES_NETTEST_IPADDR=0x0a000002 -CONFIG_EXAMPLES_NETTEST_DRIPADDR=0x0a000001 -CONFIG_EXAMPLES_NETTEST_NETMASK=0xffffff00 -CONFIG_EXAMPLES_NETTEST_CLIENTIP=0x0a000001 +# Memory Management +# +# CONFIG_MM_SMALL is not set +CONFIG_MM_REGIONS=1 +# CONFIG_GRAN is not set # -# Settings for examples/ostest +# Binary Formats +# +# CONFIG_BINFMT_DISABLE is not set +# CONFIG_NXFLAT is not set +# CONFIG_ELF is not set +# CONFIG_PIC is not set +# CONFIG_SYMTAB_ORDEREDBYNAME is not set + +# +# Library Routines +# + +# +# Standard C Library Options +# +CONFIG_STDIO_BUFFER_SIZE=256 +CONFIG_STDIO_LINEBUFFER=y +CONFIG_NUNGET_CHARS=2 +# CONFIG_LIBM is not set +# CONFIG_NOPRINTF_FIELDWIDTH is not set +# CONFIG_LIBC_FLOATINGPOINT is not set +# CONFIG_EOL_IS_CR is not set +# CONFIG_EOL_IS_LF is not set +# CONFIG_EOL_IS_BOTH_CRLF is not set +CONFIG_EOL_IS_EITHER_CRLF=y +# CONFIG_LIBC_STRERROR is not set +# CONFIG_LIBC_PERROR_STDOUT is not set +CONFIG_ARCH_LOWPUTC=y +CONFIG_LIB_SENDFILE_BUFSIZE=512 +# CONFIG_ARCH_ROMGETC is not set +# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set + +# +# Non-standard Helper Functions +# +CONFIG_LIB_KBDCODEC=y + +# +# Basic CXX Support +# +# CONFIG_C99_BOOL8 is not set +# CONFIG_HAVE_CXX is not set + +# +# Application Configuration +# + +# +# Built-In Applications +# +# CONFIG_BUILTIN is not set + # +# Examples +# +# CONFIG_EXAMPLES_BUTTONS is not set +# CONFIG_EXAMPLES_CAN is not set +# CONFIG_EXAMPLES_CDCACM is not set +# CONFIG_EXAMPLES_COMPOSITE is not set +# CONFIG_EXAMPLES_DHCPD is not set +# CONFIG_EXAMPLES_ELF is not set +# CONFIG_EXAMPLES_FTPC is not set +# CONFIG_EXAMPLES_FTPD is not set +# CONFIG_EXAMPLES_HELLO is not set +# CONFIG_EXAMPLES_HELLOXX is not set +# CONFIG_EXAMPLES_JSON is not set +# CONFIG_EXAMPLES_HIDKBD is not set +# CONFIG_EXAMPLES_KEYPADTEST is not set +# CONFIG_EXAMPLES_IGMP is not set +# CONFIG_EXAMPLES_LCDRW is not set +# CONFIG_EXAMPLES_MM is not set +# CONFIG_EXAMPLES_MOUNT is not set +# CONFIG_EXAMPLES_MODBUS is not set +# CONFIG_EXAMPLES_NETTEST is not set +# CONFIG_EXAMPLES_NSH is not set +# CONFIG_EXAMPLES_NULL is not set +# CONFIG_EXAMPLES_NX is not set +# CONFIG_EXAMPLES_NXCONSOLE is not set +# CONFIG_EXAMPLES_NXFFS is not set +# CONFIG_EXAMPLES_NXFLAT is not set +# CONFIG_EXAMPLES_NXHELLO is not set +# CONFIG_EXAMPLES_NXIMAGE is not set +# CONFIG_EXAMPLES_NXLINES is not set +# CONFIG_EXAMPLES_NXTEXT is not set +CONFIG_EXAMPLES_OSTEST=y +# CONFIG_EXAMPLES_OSTEST_BUILTIN is not set CONFIG_EXAMPLES_OSTEST_LOOPS=1 CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048 CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3 +CONFIG_EXAMPLES_OSTEST_RR_RANGE=10000 +CONFIG_EXAMPLES_OSTEST_RR_RUNS=10 +# CONFIG_EXAMPLES_PASHELLO is not set +# CONFIG_EXAMPLES_PIPE is not set +# CONFIG_EXAMPLES_POLL is not set +# CONFIG_EXAMPLES_QENCODER is not set +# CONFIG_EXAMPLES_RGMP is not set +# CONFIG_EXAMPLES_ROMFS is not set +# CONFIG_EXAMPLES_SENDMAIL is not set +# CONFIG_EXAMPLES_SERLOOP is not set +# CONFIG_EXAMPLES_TELNETD is not set +# CONFIG_EXAMPLES_THTTPD is not set +# CONFIG_EXAMPLES_TIFF is not set +# CONFIG_EXAMPLES_TOUCHSCREEN is not set +# CONFIG_EXAMPLES_UDP is not set +# CONFIG_EXAMPLES_UIP is not set +# CONFIG_EXAMPLES_USBSERIAL is not set +# CONFIG_EXAMPLES_USBMSC is not set +# CONFIG_EXAMPLES_USBTERM is not set +# CONFIG_EXAMPLES_WATCHDOG is not set # -# Settings for apps/nshlib -# -CONFIG_NSH_FILEIOSIZE=512 -CONFIG_NSH_STRERROR=n -CONFIG_NSH_LINELEN=64 -CONFIG_NSH_NESTDEPTH=3 -CONFIG_NSH_DISABLESCRIPT=n -CONFIG_NSH_DISABLEBG=n -CONFIG_NSH_ROMFSETC=n -CONFIG_NSH_CONSOLE=y -CONFIG_NSH_TELNET=n -CONFIG_NSH_ARCHINIT=n -CONFIG_NSH_IOBUFFER_SIZE=512 -CONFIG_NSH_DHCPC=n -CONFIG_NSH_NOMAC=n -CONFIG_NSH_IPADDR=0x0a000002 -CONFIG_NSH_DRIPADDR=0x0a000001 -CONFIG_NSH_NETMASK=0xffffff00 -CONFIG_NSH_ROMFSMOUNTPT="/etc" -CONFIG_NSH_INITSCRIPT="init.d/rcS" -CONFIG_NSH_ROMFSDEVNO=0 -CONFIG_NSH_ROMFSSECTSIZE=64 -CONFIG_NSH_FATDEVNO=1 -CONFIG_NSH_FATSECTSIZE=512 -CONFIG_NSH_FATNSECTORS=1024 -CONFIG_NSH_FATMOUNTPT="/tmp" - -# -# Architecture-specific NSH options -# -CONFIG_NSH_MMCSDSPIPORTNO=0 -CONFIG_NSH_MMCSDSLOTNO=0 -CONFIG_NSH_MMCSDMINOR=0 +# Interpreters +# # -# Stack and heap information +# Interpreters # -CONFIG_BOOT_RUNFROMFLASH=n -CONFIG_BOOT_COPYTORAM=n -CONFIG_CUSTOM_STACK=n -CONFIG_IDLETHREAD_STACKSIZE=1024 -CONFIG_USERMAIN_STACKSIZE=2048 -CONFIG_PTHREAD_STACK_MIN=256 -CONFIG_PTHREAD_STACK_DEFAULT=2048 -CONFIG_HEAP_BASE= -CONFIG_HEAP_SIZE= +# CONFIG_INTERPRETERS_FICL is not set +# CONFIG_INTERPRETERS_PCODE is not set + +# +# Network Utilities +# + +# +# Networking Utilities +# +# CONFIG_NETUTILS_CODECS is not set +# CONFIG_NETUTILS_DHCPC is not set +# CONFIG_NETUTILS_DHCPD is not set +# CONFIG_NETUTILS_FTPC is not set +# CONFIG_NETUTILS_FTPD is not set +# CONFIG_NETUTILS_JSON is not set +# CONFIG_NETUTILS_RESOLV is not set +# CONFIG_NETUTILS_SMTP is not set +# CONFIG_NETUTILS_TELNETD is not set +# CONFIG_NETUTILS_TFTPC is not set +# CONFIG_NETUTILS_THTTPD is not set +# CONFIG_NETUTILS_UIPLIB is not set +# CONFIG_NETUTILS_WEBCLIENT is not set + +# +# ModBus +# + +# +# FreeModbus +# +# CONFIG_MODBUS is not set + +# +# NSH Library +# +# CONFIG_NSH_LIBRARY is not set + +# +# NxWidgets/NxWM +# + +# +# System NSH Add-Ons +# + +# +# Custom Free Memory Command +# +# CONFIG_SYSTEM_FREE is not set + +# +# I2C tool +# + +# +# FLASH Program Installation +# +# CONFIG_SYSTEM_INSTALL is not set + +# +# readline() +# +# CONFIG_SYSTEM_READLINE is not set + +# +# Power Off +# +# CONFIG_SYSTEM_POWEROFF is not set + +# +# RAMTRON +# +# CONFIG_SYSTEM_RAMTRON is not set + +# +# SD Card +# +# CONFIG_SYSTEM_SDCARD is not set + +# +# Sysinfo +# +# CONFIG_SYSTEM_SYSINFO is not set |