From 1088be447cd6113169d3646182680a87213d68b8 Mon Sep 17 00:00:00 2001 From: patacongo Date: Sat, 11 Sep 2010 01:58:26 +0000 Subject: Add M25Px as paging source git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@2937 42af7a65-404d-4744-a932-0658087f49c3 --- nuttx/configs/README.txt | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'nuttx/configs/README.txt') diff --git a/nuttx/configs/README.txt b/nuttx/configs/README.txt index de149e496..1216de9d9 100644 --- a/nuttx/configs/README.txt +++ b/nuttx/configs/README.txt @@ -420,6 +420,17 @@ defconfig -- This is a configuration file similar to the Linux only a single slot (See CONFIG_MMCSD_NSLOTS). If defined, CONFIG_PAGING_SDSLOT will instruct certain board-specific logic to initialize the media in this SD slot. + CONFIG_PAGING_M25PX - Use the m25px.c FLASH driver. If this is selected, + then the MTD interface to the MP25x device will be used to support + paging. + CONFIG_PAGING_M25PX_BINOFFSET - If CONFIG_PAGING_M25PX is defined then + CONFIG_PAGING_M25PX_BINOFFSET will be used to specify the offset + in bytes into the FLASH device where the NuttX binary image is located. + Default: 0 + CONFIG_PAGING_M25PX_SPIPORT - If CONFIG_PAGING_M25PX is defined and + the device has multiple SPI busses (ports), then this configuration + should be set to indicate which SPI port the M25Px device is connected. + Default: 0 The following can be used to disable categories of APIs supported by the OS. If the compiler supports weak functions, then it -- cgit v1.2.3