From 8fc61a47027beb6309fc16fcc9901059a62026d3 Mon Sep 17 00:00:00 2001 From: patacongo Date: Sat, 24 Mar 2012 17:52:10 +0000 Subject: Update documenation to include Calypso and the Compal phones git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4513 42af7a65-404d-4744-a932-0658087f49c3 --- nuttx/configs/compal_e88/README.txt | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) create mode 100755 nuttx/configs/compal_e88/README.txt (limited to 'nuttx/configs/compal_e88/README.txt') diff --git a/nuttx/configs/compal_e88/README.txt b/nuttx/configs/compal_e88/README.txt new file mode 100755 index 000000000..fb45fb1d6 --- /dev/null +++ b/nuttx/configs/compal_e88/README.txt @@ -0,0 +1,28 @@ +compal_e88 +========== + +This directory contains the board support for compal e88 phones. + +This port is based on patches contributed by Denis Carikli for both the +compal e99 and e88. At the time of initial check-in, the following phones +were tested: + +* motorolla c155 (compal e99) with the compalram and highram configuration +* motorolla W220 (compal e88) +* The openmoko freerunner baseband(compal e88) + +The patches were made by Alan Carvalho de Assis and Denis Carikli using +the Stefan Richter's patches that can be found here: + +http://cgit.osmocom.org/cgit/nuttx-bb/log/?h=lputt%2Ftesting + +http://bb.osmocom.org/trac/wiki/nuttx-bb/run detail the usage of nuttx with +sercomm(the transport used by osmocom-bb that runs on top of serial). + +The way of loading nuttx(which is also documented in osmocom-bb wiki) depend +on the configuration(highram/compalram) and phone: + +compalram is for the ramloader(for phone having a bootloader on flash) +highram is for phones having the romloader(if the phone has a bootrom) or for +loading in the ram trough a special loader(loaded first on ram by talking to +the ramloader) when having a ramloader(which can only load 64k). -- cgit v1.2.3