From fce4c880512e8c9fa909e85ee7a84de51863a5df Mon Sep 17 00:00:00 2001 From: patacongo Date: Thu, 31 Dec 2009 20:23:07 +0000 Subject: README update + lpc313x now links to ISRAM addresses git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@2471 42af7a65-404d-4744-a932-0658087f49c3 --- nuttx/configs/ea3131/README.txt | 295 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 295 insertions(+) create mode 100755 nuttx/configs/ea3131/README.txt (limited to 'nuttx/configs/ea3131/README.txt') diff --git a/nuttx/configs/ea3131/README.txt b/nuttx/configs/ea3131/README.txt new file mode 100755 index 000000000..e52aafbb8 --- /dev/null +++ b/nuttx/configs/ea3131/README.txt @@ -0,0 +1,295 @@ +README +^^^^^^ + + This README file discusses the port of NuttX to the Embedded Artists + EA3131 board. + +Contents +^^^^^^^^ + + o Development Environment + o GNU Toolchain Options + o IDEs + o NuttX buildroot Toolchain + o Boot Sequence + o ARM/EA3131-specific Configuration Options + o Configurations + +Development Environment +^^^^^^^^^^^^^^^^^^^^^^^ + + Either Linux or Cygwin on Windows can be used for the development environment. + The source has been built only using the GNU toolchain (see below). Other + toolchains will likely cause problems. + +GNU Toolchain Options +^^^^^^^^^^^^^^^^^^^^^ + + The NuttX make system has been modified to support the following different + toolchain options. + + 1. The CodeSourcery GNU toolchain, + 2. The devkitARM GNU toolchain, + 3. Raisonance GNU toolchain, or + 4. The NuttX buildroot Toolchain (see below). + + All testing has been conducted using the NuttX buildroot toolchain. However, + the make system is setup to default to use the devkitARM toolchain. To use + the CodeSourcery, devkitARM or Raisonance GNU toolchain, you simply need to + add one of the following configuration options to your .config (or defconfig) + file: + + CONFIG_LPC313X_CODESOURCERYW=y : CodeSourcery under Windows + CONFIG_LPC313X_CODESOURCERYL=y : CodeSourcery under Linux + CONFIG_LPC313X_DEVKITARM=y : devkitARM under Windows + CONFIG_LPC313X_RAISONANCE=y : Raisonance RIDE7 under Windows + CONFIG_LPC313X_BUILDROOT=y : NuttX buildroot under Linux or Cygwin (default) + + If you are not using CONFIG_LPC313X_BUILDROOT, then you may also have to modify + the PATH in the setenv.h file if your make cannot find the tools. + + NOTE: the CodeSourcery (for Windows), devkitARM, and Raisonance toolchains are + Windows native toolchains. The CodeSourcey (for Linux) and NuttX buildroot + toolchains are Cygwin and/or Linux native toolchains. There are several limitations + to using a Windows based toolchain in a Cygwin environment. The three biggest are: + + 1. The Windows toolchain cannot follow Cygwin paths. Path conversions are + performed automatically in the Cygwin makefiles using the 'cygpath' utility + but you might easily find some new path problems. If so, check out 'cygpath -w' + + 2. Windows toolchains cannot follow Cygwin symbolic links. Many symbolic links + are used in Nuttx (e.g., include/arch). The make system works around these + problems for the Windows tools by copying directories instead of linking them. + But this can also cause some confusion for you: For example, you may edit + a file in a "linked" directory and find that your changes had not effect. + That is because you are building the copy of the file in the "fake" symbolic + directory. If you use a Windows toolchain, you should get in the habit of + making like this: + + make clean_context all + + An alias in your .bashrc file might make that less painful. + + 3. Dependencies are not made when using Windows versions of the GCC. This is + because the dependencies are generated using Windows pathes which do not + work with the Cygwin make. + + Support has been added for making dependencies with the windows-native toolchains. + That support can be enabled by modifying your Make.defs file as follows: + + - MKDEP = $(TOPDIR)/tools/mknulldeps.sh + + MKDEP = $(TOPDIR)/tools/mkdeps.sh --winpaths "$(TOPDIR)" + + If you have problems with the dependency build (for example, if you are not + building on C:), then you may need to modify tools/mkdeps.sh + + NOTE 1: The CodeSourcery toolchain (2009q1) does not work with default optimization + level of -Os (See Make.defs). It will work with -O0, -O1, or -O2, but not with + -Os. + + NOTE 2: The devkitARM toolchain includes a version of MSYS make. Make sure that + the paths to Cygwin's /bin and /usr/bin directories appear BEFORE the devkitARM + path or will get the wrong version of make. + +IDEs +^^^^ + + NuttX is built using command-line make. It can be used with an IDE, but some + effort will be required to create the project (There is a simple RIDE project + in the RIDE subdirectory). Here are a few tip before you start that effort: + + 1) Select the toolchain that you will be using in your .config file + 2) Start the NuttX build at least one time from the Cygwin command line + before trying to create your project. This is necessary to create + certain auto-generated files and directories that will be needed. + 3) Set up include pathes: You will need include/, arch/arm/src/lpc313x, + arch/arm/src/common, arch/arm/src/cortexm3, and sched/. + 4) All assembly files need to have the definition option -D __ASSEMBLY__ + on the command line. + + Startup files will probably cause you some headaches. The NuttX startup file + is arch/arm/src/lpc313x/lpc313x_vectors.S. With RIDE, I have to build NuttX + one time from the Cygwin command line in order to obtain the pre-built + startup object needed by RIDE. + +NuttX buildroot Toolchain +^^^^^^^^^^^^^^^^^^^^^^^^^ + + A GNU GCC-based toolchain is assumed. The files */setenv.sh should + be modified to point to the correct path to the Cortex-M3 GCC toolchain (if + different from the default in your PATH variable). + + If you have no Cortex-M3 toolchain, one can be downloaded from the NuttX + SourceForge download site (https://sourceforge.net/project/showfiles.php?group_id=189573). + This GNU toolchain builds and executes in the Linux or Cygwin environment. + + 1. You must have already configured Nuttx in /nuttx. + + cd tools + ./configure.sh ea3131/ + + 2. Download the latest buildroot package into + + 3. unpack the buildroot tarball. The resulting directory may + have versioning information on it like buildroot-x.y.z. If so, + rename /buildroot-x.y.z to /buildroot. + + 4. cd /buildroot + + 5. cp configs/arm926t-defconfig-4.2.4 .config + + 6. make oldconfig + + 7. make + + 8. Edit setenv.h, if necessary, so that the PATH variable includes + the path to the newly built binaries. + + See the file configs/README.txt in the buildroot source tree. That has more + detailed PLUS some special instructions that you will need to follow if you are + building a Cortex-M3 toolchain for Cygwin under Windows. + +Boot Sequence +^^^^^^^^^^^^^ + LPC313x has on chip bootrom which loads properly formatted images from multiple + sources into SRAM. These sources include including SPI Flash, NOR Flash, UART, + USB, SD Card, and NAND Flash. + + In all configurations, NuttX is loaded directly into ISRAM. NuttX is linked + to execute from ISRAM, regardless of the boot source. + +ARM/EA3131-specific Configuration Options +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + CONFIG_ARCH - Identifies the arch/ subdirectory. This should + be set to: + + CONFIG_ARCH=arm + + CONFIG_ARCH_family - For use in C code: + + CONFIG_ARCH_ARM=y + + CONFIG_ARCH_architecture - For use in C code: + + CONFIG_ARCH_ARM926EJS=y + + CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory + + CONFIG_ARCH_CHIP=lpc313x + + CONFIG_ARCH_CHIP_name - For use in C code + + CONFIG_ARCH_CHIP_LPC3131 + + CONFIG_ARCH_BOARD - Identifies the configs subdirectory and + hence, the board that supports the particular chip or SoC. + + CONFIG_ARCH_BOARD=ea3131 + + CONFIG_ARCH_BOARD_name - For use in C code + + CONFIG_ARCH_BOARD_EA3131 + + CONFIG_ARCH_LOOPSPERMSEC - Must be calibrated for correct operation + of delay loops + + CONFIG_ENDIAN_BIG - define if big endian (default is little + endian) + + CONFIG_DRAM_SIZE - For most ARM9 architectures, this describes the + size of installed DRAM. For the LPC313X, it is used only to + deterimine how to map the executable regions. It is SDRAM size + only if you are executing out of the external SDRAM; or it could + be NOR FLASH size, external SRAM size, or internal SRAM size. + + CONFIG_DRAM_START - The start address of installed DRAM (physical) + + CONFIG_DRAM_VSTART - The startaddress of DRAM (virtual) + + CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to boards that + have LEDs + + CONFIG_ARCH_IRQPRIO - The LPC313x supports interrupt prioritization + + CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt + stack. If defined, this symbol is the size of the interrupt + stack in bytes. If not defined, the user task stacks will be + used during interrupt handling. + + CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions + + CONFIG_ARCH_BOOTLOADER - Set if you are using a bootloader. + + CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture. + + CONFIG_ARCH_BUTTONS - Enable support for buttons. Unique to board architecture. + + CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that + cause a 100 second delay during boot-up. This 100 second delay + serves no purpose other than it allows you to calibratre + CONFIG_ARCH_LOOPSPERMSEC. You simply use a stop watch to measure + the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until + the delay actually is 100 seconds. + CONFIG_ARCH_DMA - Support DMA initialization + CONFIG_ARCH_LOWVECTORS - define if vectors reside at address 0x0000:00000 + Undefine if vectors reside at address 0xffff:0000 + CONFIG_ARCH_ROMPGTABLE - A pre-initialized, read-only page table is available. + If defined, then board-specific logic must also define PGTABLE_BASE_PADDR, + PGTABLE_BASE_VADDR, and all memory section mapping in a file named + board_memorymap.h. + + Individual subsystems can be enabled: + + CONFIG_LPC313X_MCI, CONFIG_LPC313X_SPI, CONFIG_LPC313X_UART + + xernal memory available on the board (see also CONFIG_MM_REGIONS) + + CONFIG_LPC313X_EXTSRAM0 - Select if external SRAM0 is present + CONFIG_LPC313X_EXTSRAM0HEAP - Select if external SRAM0 should be + configured as part of the NuttX heap. + CONFIG_LPC313X_EXTSRAM0SIZE - Size (in bytes) of the installed + external SRAM0 memory + CONFIG_LPC313X_EXTSRAM1 - Select if external SRAM1 is present + CONFIG_LPC313X_EXTSRAM1HEAP - Select if external SRAM1 should be + configured as part of the NuttX heap. + CONFIG_LPC313X_EXTSRAM1SIZE - Size (in bytes) of the installed + external SRAM1 memory + CONFIG_LPC313X_EXTSDRAM - Select if external SDRAM is present + CONFIG_LPC313X_EXTSDRAMHEAP - Select if external SDRAM should be + configured as part of the NuttX heap. + CONFIG_LPC313X_EXTSDRAMSIZE - Size (in bytes) of the installed + external SDRAM memory + CONFIG_LPC313X_EXTNAND - Select if external NAND is present + CONFIG_LPC313X_EXTSDRAMSIZE - Size (in bytes) of the installed + external NAND memory + + LPC313X specific device driver settings + + CONFIG_UART_SERIAL_CONSOLE - selects the UART for the + console and ttys0 + CONFIG_UART_RXBUFSIZE - Characters are buffered as received. + This specific the size of the receive buffer + CONFIG_UART_TXBUFSIZE - Characters are buffered before + being sent. This specific the size of the transmit buffer + CONFIG_UART_BAUD - The configure BAUD of the UART. Must be + CONFIG_UART_BITS - The number of bits. Must be either 7 or 8. + CONFIG_UART_PARTIY - 0=no parity, 1=odd parity, 2=even parity + CONFIG_UART_2STOP - Two stop bits + +Configurations +^^^^^^^^^^^^^^ + +Each EA3131 configuration is maintained in a sudirectory and can be +selected as follow: + + cd tools + ./configure.sh ea3131/ + cd - + . ./setenv.sh + +Where is one of the following: + + ostest: + This configuration directory, performs a simple OS test using + examples/ostest. By default, this project assumes that you are + using the DFU bootloader. -- cgit v1.2.3