From be85acd0f71ce088b4e1584e6ce485015288f63c Mon Sep 17 00:00:00 2001 From: patacongo Date: Fri, 27 May 2011 15:26:52 +0000 Subject: Rename all lpc313x to lpc31xx git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3644 42af7a65-404d-4744-a932-0658087f49c3 --- nuttx/configs/ea3131/src/up_boot.c | 238 ++++++++++++++++++------------------- 1 file changed, 119 insertions(+), 119 deletions(-) (limited to 'nuttx/configs/ea3131/src/up_boot.c') diff --git a/nuttx/configs/ea3131/src/up_boot.c b/nuttx/configs/ea3131/src/up_boot.c index 59ed9e778..94c4d8a9c 100755 --- a/nuttx/configs/ea3131/src/up_boot.c +++ b/nuttx/configs/ea3131/src/up_boot.c @@ -1,119 +1,119 @@ -/************************************************************************************ - * configs/ea3131/src/up_boot.c - * arch/arm/src/board/up_boot.c - * - * Copyright (C) 2009 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ************************************************************************************/ - -/************************************************************************************ - * Included Files - ************************************************************************************/ - -#include - -#include - -#include - -#include "up_arch.h" -#include "up_internal.h" -#include "lpc313x_internal.h" -#include "ea3131_internal.h" - -/************************************************************************************ - * Definitions - ************************************************************************************/ - -/************************************************************************************ - * Private Functions - ************************************************************************************/ - -/************************************************************************************ - * Public Functions - ************************************************************************************/ - -/************************************************************************************ - * Name: lpc313x_boardinitialize - * - * Description: - * All LPC313X architectures must provide the following entry point. This entry - * point is called early in the intitialization -- after all memory has been - * configured and mapped but before any devices have been initialized. - * - ************************************************************************************/ - -void lpc313x_boardinitialize(void) -{ - /* Initialize configured, external memory resources */ - -#ifdef CONFIG_LPC313X_EXTSDRAM - lpc313x_meminitialize(); -#endif - - /* Configure SPI chip selects if 1) SPI is not disabled, and 2) the weak function - * lpc313x_spiinitialize() has been brought into the link. - */ - -#if defined(CONFIG_LPC313X_SPI) - if (lpc313x_spiinitialize) - { - lpc313x_spiinitialize(); - } -#endif - - /* Initialize USB is 1) USBDEV is selected, 2) the USB controller is not - * disabled, and 3) the weak function lpc313x_usbinitialize() has been brought - * into the build. - */ - -#if defined(CONFIG_USBDEV) && defined(CONFIG_LPC313X_USB) - if (lpc313x_usbinitialize) - { - lpc313x_usbinitialize(); - } -#endif - - /* Configure on-board LEDs if LED support has been selected. */ - -#ifdef CONFIG_ARCH_LEDS - up_ledinit(); -#endif - - /* Set up mass storage device to support on demand paging */ - -#if defined(CONFIG_PAGING) - if (lpc313x_pginitialize) - { - lpc313x_pginitialize(); - } -#endif -} +/************************************************************************************ + * configs/ea3131/src/up_boot.c + * arch/arm/src/board/up_boot.c + * + * Copyright (C) 2009 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +#include + +#include + +#include + +#include "up_arch.h" +#include "up_internal.h" +#include "lpc31_internal.h" +#include "ea3131_internal.h" + +/************************************************************************************ + * Definitions + ************************************************************************************/ + +/************************************************************************************ + * Private Functions + ************************************************************************************/ + +/************************************************************************************ + * Public Functions + ************************************************************************************/ + +/************************************************************************************ + * Name: lpc31_boardinitialize + * + * Description: + * All LPC31XX architectures must provide the following entry point. This entry + * point is called early in the intitialization -- after all memory has been + * configured and mapped but before any devices have been initialized. + * + ************************************************************************************/ + +void lpc31_boardinitialize(void) +{ + /* Initialize configured, external memory resources */ + +#ifdef CONFIG_LPC31XX_EXTSDRAM + lpc31_meminitialize(); +#endif + + /* Configure SPI chip selects if 1) SPI is not disabled, and 2) the weak function + * lpc31_spiinitialize() has been brought into the link. + */ + +#if defined(CONFIG_LPC31XX_SPI) + if (lpc31_spiinitialize) + { + lpc31_spiinitialize(); + } +#endif + + /* Initialize USB is 1) USBDEV is selected, 2) the USB controller is not + * disabled, and 3) the weak function lpc31_usbinitialize() has been brought + * into the build. + */ + +#if defined(CONFIG_USBDEV) && defined(CONFIG_LPC31XX_USB) + if (lpc31_usbinitialize) + { + lpc31_usbinitialize(); + } +#endif + + /* Configure on-board LEDs if LED support has been selected. */ + +#ifdef CONFIG_ARCH_LEDS + up_ledinit(); +#endif + + /* Set up mass storage device to support on demand paging */ + +#if defined(CONFIG_PAGING) + if (lpc31_pginitialize) + { + lpc31_pginitialize(); + } +#endif +} -- cgit v1.2.3