From 769fef9a363e9255551008548571c4ffdb9c9af0 Mon Sep 17 00:00:00 2001 From: patacongo Date: Mon, 18 Apr 2011 17:16:24 +0000 Subject: Add NX configuration for LPCXpresso git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3521 42af7a65-404d-4744-a932-0658087f49c3 --- nuttx/configs/lpcxpresso-lpc1768/README.txt | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'nuttx/configs/lpcxpresso-lpc1768/README.txt') diff --git a/nuttx/configs/lpcxpresso-lpc1768/README.txt b/nuttx/configs/lpcxpresso-lpc1768/README.txt index 0b83aef8b..1ccd7f623 100755 --- a/nuttx/configs/lpcxpresso-lpc1768/README.txt +++ b/nuttx/configs/lpcxpresso-lpc1768/README.txt @@ -123,6 +123,8 @@ SD Slot CLK PIO2_11-SCK 7 P0.9 SCK1 CD PIO2_10 52 P2.11 + These jumper settings are required: + *J55 must be set to provide chip select PIO1_11 signal as the SD slot chip select. @@ -137,6 +139,9 @@ USB Device USB_DP 37 USB_D+ PIO0_3-VBUS_SENSE** 39 P0.5 + These jumper settings are listed for information only. They are *not* + required for use with NuttX and LPCXpresso. + *J14 must be set to permit GPIO control of the USB connect pin **J12 must be set to permit GPIO control of the USB vbus sense pin J23 is associated the LEDs used for USB support -- cgit v1.2.3