From 9ae260c5f1f366b3c9ccd17352ace3ee45f74c08 Mon Sep 17 00:00:00 2001 From: patacongo Date: Sun, 14 Nov 2010 17:33:45 +0000 Subject: Clean-up and document LP17xx ethernet driver configuration settings git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3109 42af7a65-404d-4744-a932-0658087f49c3 --- nuttx/configs/nucleus2g/nsh/defconfig | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) (limited to 'nuttx/configs/nucleus2g/nsh/defconfig') diff --git a/nuttx/configs/nucleus2g/nsh/defconfig b/nuttx/configs/nucleus2g/nsh/defconfig index 6c529e56a..c2109fabf 100755 --- a/nuttx/configs/nucleus2g/nsh/defconfig +++ b/nuttx/configs/nucleus2g/nsh/defconfig @@ -181,6 +181,30 @@ CONFIG_UART1_2STOP=0 CONFIG_UART2_2STOP=0 CONFIG_UART3_2STOP=0 +# +# LPC17xx specific PHY/Ethernet device driver settings +# +# CONFIG_PHY_KS8721 - Selects Micrel KS8721 PHY +# CONFIG_PHY_AUTONEG - Enable auto-negotion +# CONFIG_PHY_SPEED100 - Select 100Mbit vs. 10Mbit speed. +# CONFIG_PHY_FDUPLEX - Select full (vs. half) duplex +# CONFIG_NET_NTXDESC - Configured number of Tx descriptors. Default: 18 +# CONFIG_NET_NRXDESC - Configured number of Rx descriptors. Default: 18 +# CONFIG_NET_PRIORITY - Ethernet interrupt priority. The is default is +# the higest priority. +# CONFIG_NET_WOL - Enable Wake-up on Lan (not fully implemented). +# CONFIG_NET_REGDEBUG - Enabled low level register debug. Also needs +# CONFIG_DEBUG. +# CONFIG_NET_BROADCAST - Enable receipt of broadcast frames +# CONFIG_NET_HASH - Enable receipt of near-perfect match frames. +# CONFIG_NET_MULTICAST - Enable receipt of multicast (and unicast) frames. +# Automatically set if CONFIG_NET_IGMP is selected. +# +CONFIG_PHY_KS8721=y +CONFIG_PHY_AUTONEG=y +CONFIG_PHY_SPEED100=n +CONFIG_PHY_FDUPLEX=y + # # General build options # -- cgit v1.2.3