From 6a969146eb87c8b6bb06a64b37f7afecaa8144e6 Mon Sep 17 00:00:00 2001 From: patacongo Date: Sat, 16 Apr 2011 02:14:27 +0000 Subject: Add a THTTPD configuration for the LPCXpresso board git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3512 42af7a65-404d-4744-a932-0658087f49c3 --- nuttx/configs/olimex-lpc1766stk/README.txt | 16 ++++++++-------- nuttx/configs/olimex-lpc1766stk/thttpd/appconfig | 1 - nuttx/configs/olimex-lpc1766stk/thttpd/defconfig | 2 +- 3 files changed, 9 insertions(+), 10 deletions(-) (limited to 'nuttx/configs/olimex-lpc1766stk') diff --git a/nuttx/configs/olimex-lpc1766stk/README.txt b/nuttx/configs/olimex-lpc1766stk/README.txt index 7367abff9..b138d6604 100755 --- a/nuttx/configs/olimex-lpc1766stk/README.txt +++ b/nuttx/configs/olimex-lpc1766stk/README.txt @@ -779,15 +779,15 @@ Where is one of the following: hidkbd: This configuration directory, performs a simple test of the USB host - HID keyboard class driver using the test logic in examples/hidkbd. + HID keyboard class driver using the test logic in apps/examples/hidkbd. nettest: This configuration directory may be used to enable networking using the - LPC17xx's Ethernet controller. It uses examples/nettest to excercise the + LPC17xx's Ethernet controller. It uses apps/examples/nettest to excercise the TCP/IP network. nsh: - Configures the NuttShell (nsh) located at examples/nsh. The + Configures the NuttShell (nsh) located at apps/examples/nsh. The Configuration enables both the serial and telnet NSH interfaces. Support for the board's SPI-based MicroSD card is included (but not passing tests as of this writing). @@ -798,7 +798,7 @@ Where is one of the following: ostest: This configuration directory, performs a simple OS test using - examples/ostest. + apps/examples/ostest. slip-httpd: This configuration is identical to the thttpd configuration except that @@ -851,15 +851,15 @@ Where is one of the following: thttpd: This builds the THTTPD web server example using the THTTPD and - the examples/thttpd application. + the apps/examples/thttpd application. usbserial: This configuration directory exercises the USB serial class - driver at examples/usbserial. See examples/README.txt for + driver at apps/examples/usbserial. See apps/examples/README.txt for more information. usbstorage: This configuration directory exercises the USB mass storage - class driver at examples/usbstorage. See examples/README.txt for - more information. + class driver at apps/examples/usbstorage. See apps/examples/README.txt + for more information. diff --git a/nuttx/configs/olimex-lpc1766stk/thttpd/appconfig b/nuttx/configs/olimex-lpc1766stk/thttpd/appconfig index 3cfb75839..6681a6bd9 100644 --- a/nuttx/configs/olimex-lpc1766stk/thttpd/appconfig +++ b/nuttx/configs/olimex-lpc1766stk/thttpd/appconfig @@ -37,7 +37,6 @@ CONFIGURED_APPS += examples/thttpd - # Networking support CONFIGURED_APPS += netutils/uiplib diff --git a/nuttx/configs/olimex-lpc1766stk/thttpd/defconfig b/nuttx/configs/olimex-lpc1766stk/thttpd/defconfig index f51f083a8..bcc8a458b 100755 --- a/nuttx/configs/olimex-lpc1766stk/thttpd/defconfig +++ b/nuttx/configs/olimex-lpc1766stk/thttpd/defconfig @@ -64,7 +64,7 @@ # CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that # cause a 100 second delay during boot-up. This 100 second delay # serves no purpose other than it allows you to calibrate -# CONFIG_BOARD_LOOPSPERMSEC. You simply use a stop watch to measure +# CONFIG_BOARD_LOOPSPERMSEC. You simply use a stop watch to measure # the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until # the delay actually is 100 seconds. # CONFIG_ARCH_DMA - Support DMA initialization -- cgit v1.2.3