From 6afb58c74e1b0bbfe3306e1a3a00d31462c598fa Mon Sep 17 00:00:00 2001 From: patacongo Date: Wed, 9 Jan 2013 12:55:13 +0000 Subject: Use kconfig- prefix to avoid tool name conflicts (from Jose Pablo Carballo) git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5496 42af7a65-404d-4744-a932-0658087f49c3 --- nuttx/configs/stm3220g-eval/README.txt | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'nuttx/configs/stm3220g-eval/README.txt') diff --git a/nuttx/configs/stm3220g-eval/README.txt b/nuttx/configs/stm3220g-eval/README.txt index e7bdd4de0..40c918582 100644 --- a/nuttx/configs/stm3220g-eval/README.txt +++ b/nuttx/configs/stm3220g-eval/README.txt @@ -65,8 +65,8 @@ GNU Toolchain Options If you change the default toolchain, then you may also have to modify the PATH in the setenv.h file if your make cannot find the tools. - The toolchain may also be set using the mconf utility (make menuconfig) or by - passing CONFIG_ARMV7M_TOOLCHAIN= to make, where is one + The toolchain may also be set using the kconfig-mconf utility (make menuconfig) + or by passing CONFIG_ARMV7M_TOOLCHAIN= to make, where is one of CODESOURCERYW, CODESOURCERYL, ATOLLOC, DEVKITARM, RAISONANCE, BUILDROOT or GNU_EABI as described above. @@ -1082,8 +1082,8 @@ Where is one of the following: 1. This configuration uses the mconf-based configuration tool. To change this configuration using that tool, you should: - a. Build and install the mconf tool. See nuttx/README.txt and - misc/tools/ + a. Build and install the kconfig-mconf tool. See nuttx/README.txt + and misc/tools/ b. Execute 'make menuconfig' in nuttx/ in order to start the reconfiguration process. -- cgit v1.2.3