From ceef9e3bece69f86e585b3bf00e5009551350e2b Mon Sep 17 00:00:00 2001 From: patacongo Date: Wed, 6 Feb 2013 22:30:57 +0000 Subject: Beginnings of support for the STM32F3Discovery board git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5616 42af7a65-404d-4744-a932-0658087f49c3 --- nuttx/configs/stm32f3discovery/src/up_userleds.c | 248 +++++++++++++++++++++++ 1 file changed, 248 insertions(+) create mode 100644 nuttx/configs/stm32f3discovery/src/up_userleds.c (limited to 'nuttx/configs/stm32f3discovery/src/up_userleds.c') diff --git a/nuttx/configs/stm32f3discovery/src/up_userleds.c b/nuttx/configs/stm32f3discovery/src/up_userleds.c new file mode 100644 index 000000000..3b7bfa08f --- /dev/null +++ b/nuttx/configs/stm32f3discovery/src/up_userleds.c @@ -0,0 +1,248 @@ +/**************************************************************************** + * configs/stm32f3discovery/src/up_leds.c + * arch/arm/src/board/up_leds.c + * + * Copyright (C) 2011 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include + +#include +#include +#include + +#include +#include + +#include "chip.h" +#include "up_arch.h" +#include "up_internal.h" +#include "stm32_internal.h" +#include "stm32f3discovery-internal.h" + +#ifndef CONFIG_ARCH_LEDS + +/**************************************************************************** + * Definitions + ****************************************************************************/ + +/* Enables debug output from this file (needs CONFIG_DEBUG with + * CONFIG_DEBUG_VERBOSE too) + */ + +#undef LED_DEBUG /* Define to enable debug */ + +#ifdef LED_DEBUG +# define leddbg lldbg +# define ledvdbg llvdbg +#else +# define leddbg(x...) +# define ledvdbg(x...) +#endif + +/**************************************************************************** + * Private Data + ****************************************************************************/ +/* This array maps an LED number to GPIO pin configuration */ + +static uint32_t g_ledcfg[BOARD_NLEDS] = +{ + GPIO_LED1, GPIO_LED2, GPIO_LED3, GPIO_LED4 +}; + +/**************************************************************************** + * Private Function Protototypes + ****************************************************************************/ + +/* LED Power Management */ + +#ifdef CONFIG_PM +static void led_pm_notify(struct pm_callback_s *cb, enum pm_state_e pmstate); +static int led_pm_prepare(struct pm_callback_s *cb, enum pm_state_e pmstate); +#endif + + +/**************************************************************************** + * Private Data + ****************************************************************************/ + +#ifdef CONFIG_PM +static struct pm_callback_s g_ledscb = +{ + .notify = led_pm_notify, + .prepare = led_pm_prepare, +}; +#endif + +/**************************************************************************** + * Private Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: led_pm_notify + * + * Description: + * Notify the driver of new power state. This callback is called after + * all drivers have had the opportunity to prepare for the new power state. + * + ****************************************************************************/ + +#ifdef CONFIG_PM +static void led_pm_notify(struct pm_callback_s *cb , enum pm_state_e pmstate) +{ + switch (pmstate) + { + case(PM_NORMAL): + { + /* Restore normal LEDs operation */ + + } + break; + + case(PM_IDLE): + { + /* Entering IDLE mode - Turn leds off */ + + } + break; + + case(PM_STANDBY): + { + /* Entering STANDBY mode - Logic for PM_STANDBY goes here */ + + } + break; + + case(PM_SLEEP): + { + /* Entering SLEEP mode - Logic for PM_SLEEP goes here */ + + } + break; + + default: + { + /* Should not get here */ + + } + break; + } +} +#endif + +/**************************************************************************** + * Name: led_pm_prepare + * + * Description: + * Request the driver to prepare for a new power state. This is a warning + * that the system is about to enter into a new power state. The driver + * should begin whatever operations that may be required to enter power + * state. The driver may abort the state change mode by returning a + * non-zero value from the callback function. + * + ****************************************************************************/ + +#ifdef CONFIG_PM +static int led_pm_prepare(struct pm_callback_s *cb , enum pm_state_e pmstate) +{ + /* No preparation to change power modes is required by the LEDs driver. + * We always accept the state change by returning OK. + */ + + return OK; +} +#endif + +/**************************************************************************** + * Public Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: stm32_ledinit + ****************************************************************************/ + +void stm32_ledinit(void) +{ + /* Configure LED1-4 GPIOs for output */ + + stm32_configgpio(GPIO_LED1); + stm32_configgpio(GPIO_LED2); + stm32_configgpio(GPIO_LED3); + stm32_configgpio(GPIO_LED4); +} + +/**************************************************************************** + * Name: stm32_setled + ****************************************************************************/ + +void stm32_setled(int led, bool ledon) +{ + if ((unsigned)led < BOARD_NLEDS) + { + stm32_gpiowrite(g_ledcfg[led], ledon); + } +} + +/**************************************************************************** + * Name: stm32_setleds + ****************************************************************************/ + +void stm32_setleds(uint8_t ledset) +{ + stm32_gpiowrite(GPIO_LED1, (ledset & BOARD_LED1_BIT) == 0); + stm32_gpiowrite(GPIO_LED2, (ledset & BOARD_LED2_BIT) == 0); + stm32_gpiowrite(GPIO_LED3, (ledset & BOARD_LED3_BIT) == 0); + stm32_gpiowrite(GPIO_LED4, (ledset & BOARD_LED4_BIT) == 0); +} + +/**************************************************************************** + * Name: up_ledpminitialize + ****************************************************************************/ + +#ifdef CONFIG_PM +void up_ledpminitialize(void) +{ + /* Register to receive power management callbacks */ + + int ret = pm_register(&g_ledscb); + if (ret != OK) + { + up_ledon(LED_ASSERTION); + } +} +#endif /* CONFIG_PM */ + +#endif /* !CONFIG_ARCH_LEDS */ -- cgit v1.2.3