From 1c871cf28a9f18a9488513cf38c56abe3adad7b8 Mon Sep 17 00:00:00 2001 From: patacongo Date: Wed, 11 Jan 2012 13:01:26 +0000 Subject: Add support for the STM32F4-Discovery (from Mike Smith) git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4294 42af7a65-404d-4744-a932-0658087f49c3 --- nuttx/configs/stm32f4discovery/src/Makefile | 99 ++++++++ .../src/stm32f4discovery-internal.h | 125 ++++++++++ nuttx/configs/stm32f4discovery/src/up_autoleds.c | 260 +++++++++++++++++++++ nuttx/configs/stm32f4discovery/src/up_boot.c | 90 +++++++ nuttx/configs/stm32f4discovery/src/up_buttons.c | 165 +++++++++++++ nuttx/configs/stm32f4discovery/src/up_pwm.c | 142 +++++++++++ nuttx/configs/stm32f4discovery/src/up_spi.c | 165 +++++++++++++ nuttx/configs/stm32f4discovery/src/up_userleds.c | 131 +++++++++++ 8 files changed, 1177 insertions(+) create mode 100644 nuttx/configs/stm32f4discovery/src/Makefile create mode 100644 nuttx/configs/stm32f4discovery/src/stm32f4discovery-internal.h create mode 100644 nuttx/configs/stm32f4discovery/src/up_autoleds.c create mode 100644 nuttx/configs/stm32f4discovery/src/up_boot.c create mode 100644 nuttx/configs/stm32f4discovery/src/up_buttons.c create mode 100644 nuttx/configs/stm32f4discovery/src/up_pwm.c create mode 100644 nuttx/configs/stm32f4discovery/src/up_spi.c create mode 100644 nuttx/configs/stm32f4discovery/src/up_userleds.c (limited to 'nuttx/configs/stm32f4discovery/src') diff --git a/nuttx/configs/stm32f4discovery/src/Makefile b/nuttx/configs/stm32f4discovery/src/Makefile new file mode 100644 index 000000000..133cc1467 --- /dev/null +++ b/nuttx/configs/stm32f4discovery/src/Makefile @@ -0,0 +1,99 @@ +############################################################################ +# configs/stm32f4discovery/src/Makefile +# +# Copyright (C) 2011 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ + +-include $(TOPDIR)/Make.defs + +CFLAGS += -I$(TOPDIR)/sched + +ASRCS = +AOBJS = $(ASRCS:.S=$(OBJEXT)) + +CSRCS = up_boot.c up_spi.c + +ifeq ($(CONFIG_ARCH_LEDS),y) +CSRCS += up_autoleds.c +else +CSRCS += up_userleds.c +endif + +ifeq ($(CONFIG_ARCH_BUTTONS),y) +CSRCS += up_buttons.c +endif + +ifeq ($(CONFIG_PWM),y) +CSRCS += up_pwm.c +endif + +COBJS = $(CSRCS:.c=$(OBJEXT)) + +SRCS = $(ASRCS) $(CSRCS) +OBJS = $(AOBJS) $(COBJS) + +ARCH_SRCDIR = $(TOPDIR)/arch/$(CONFIG_ARCH)/src +ifeq ($(WINTOOL),y) + CFLAGS += -I "${shell cygpath -w $(ARCH_SRCDIR)/chip}" \ + -I "${shell cygpath -w $(ARCH_SRCDIR)/common}" \ + -I "${shell cygpath -w $(ARCH_SRCDIR)/armv7-m}" +else + CFLAGS += -I$(ARCH_SRCDIR)/chip -I$(ARCH_SRCDIR)/common -I$(ARCH_SRCDIR)/armv7-m +endif + +all: libboard$(LIBEXT) + +$(AOBJS): %$(OBJEXT): %.S + $(call ASSEMBLE, $<, $@) + +$(COBJS) $(LINKOBJS): %$(OBJEXT): %.c + $(call COMPILE, $<, $@) + +libboard$(LIBEXT): $(OBJS) + @( for obj in $(OBJS) ; do \ + $(call ARCHIVE, $@, $${obj}); \ + done ; ) + +.depend: Makefile $(SRCS) + @$(MKDEP) $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep + @touch $@ + +depend: .depend + +clean: + @rm -f libboard$(LIBEXT) *~ .*.swp + $(call CLEAN) + +distclean: clean + @rm -f Make.dep .depend + +-include Make.dep diff --git a/nuttx/configs/stm32f4discovery/src/stm32f4discovery-internal.h b/nuttx/configs/stm32f4discovery/src/stm32f4discovery-internal.h new file mode 100644 index 000000000..8b9ca8d3c --- /dev/null +++ b/nuttx/configs/stm32f4discovery/src/stm32f4discovery-internal.h @@ -0,0 +1,125 @@ +/**************************************************************************************************** + * configs/stm3240g_eval/src/stm3240g_internal.h + * arch/arm/src/board/stm3240g_internal.n + * + * Copyright (C) 2011 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************************************/ + +#ifndef __CONFIGS_STM3240G_EVAL_SRC_STM3240G_INTERNAL_H +#define __CONFIGS_STM3240G_EVAL_SRC_STM3240G_INTERNAL_H + +/**************************************************************************************************** + * Included Files + ****************************************************************************************************/ + +#include +#include +#include + +/**************************************************************************************************** + * Definitions + ****************************************************************************************************/ +/* Configuration ************************************************************************************/ +/* How many SPI modules does this chip support? */ + +#if STM32_NSPI < 1 +# undef CONFIG_STM32_SPI1 +# undef CONFIG_STM32_SPI2 +# undef CONFIG_STM32_SPI3 +#elif STM32_NSPI < 2 +# undef CONFIG_STM32_SPI2 +# undef CONFIG_STM32_SPI3 +#elif STM32_NSPI < 3 +# undef CONFIG_STM32_SPI3 +#endif + +/* STM32F4 Discovery GPIOs **************************************************************************/ +/* LEDs */ + +#define GPIO_LED1 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\ + GPIO_OUTPUT_CLEAR|GPIO_PORTD|GPIO_PIN12) +#define GPIO_LED2 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\ + GPIO_OUTPUT_CLEAR|GPIO_PORTD|GPIO_PIN13) +#define GPIO_LED3 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\ + GPIO_OUTPUT_CLEAR|GPIO_PORTD|GPIO_PIN14) +#define GPIO_LED4 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\ + GPIO_OUTPUT_CLEAR|GPIO_PORTD|GPIO_PIN15) + +/* BUTTONS -- NOTE that all have EXTI interrupts configured */ + +#define MIN_IRQBUTTON BUTTON_USER +#define MAX_IRQBUTTON BUTTON_USER +#define NUM_IRQBUTTONS 1 + +#define GPIO_BTN_USER (GPIO_INPUT|GPIO_FLOAT|GPIO_EXTI|GPIO_PORTA|GPIO_PIN0) + +/* PWM + * + * The STM32F4 Discovery has no real on-board PWM devices, but the board can be + * configured to output a pulse train using TIM4 CH2 on PD13. + */ + +#define STM3240G_EVAL_PWMTIMER 4 +#define STM3240G_EVAL_PWMCHANNEL 2 + +/* SPI chip selects */ + +#define GPIO_CS_MEMS (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\ + GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN3) + +/**************************************************************************************************** + * Public Types + ****************************************************************************************************/ + +/**************************************************************************************************** + * Public data + ****************************************************************************************************/ + +#ifndef __ASSEMBLY__ + +/**************************************************************************************************** + * Public Functions + ****************************************************************************************************/ + +/**************************************************************************************************** + * Name: stm32_spiinitialize + * + * Description: + * Called to configure SPI chip select GPIO pins for the stm32f4discovery board. + * + ****************************************************************************************************/ + +extern void weak_function stm32_spiinitialize(void); + +#endif /* __ASSEMBLY__ */ +#endif /* __CONFIGS_STM3240G_EVAL_SRC_STM3240G_INTERNAL_H */ + diff --git a/nuttx/configs/stm32f4discovery/src/up_autoleds.c b/nuttx/configs/stm32f4discovery/src/up_autoleds.c new file mode 100644 index 000000000..5d97f8758 --- /dev/null +++ b/nuttx/configs/stm32f4discovery/src/up_autoleds.c @@ -0,0 +1,260 @@ +/**************************************************************************** + * configs/stm3240g_eval/src/up_autoleds.c + * arch/arm/src/board/up_autoleds.c + * + * Copyright (C) 2011 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include + +#include +#include +#include + +#include + +#include "chip.h" +#include "up_arch.h" +#include "up_internal.h" +#include "stm32_internal.h" +#include "stm32f4discovery-internal.h" + +#ifdef CONFIG_ARCH_LEDS + +/**************************************************************************** + * Definitions + ****************************************************************************/ + +/* Enables debug output from this file (needs CONFIG_DEBUG with + * CONFIG_DEBUG_VERBOSE too) + */ + +#undef LED_DEBUG /* Define to enable debug */ + +#ifdef LED_DEBUG +# define leddbg lldbg +# define ledvdbg llvdbg +#else +# define leddbg(x...) +# define ledvdbg(x...) +#endif + +/* The following definitions map the encoded LED setting to GPIO settings */ + +#define STM3210E_LED1 (1 << 0) +#define STM3210E_LED2 (1 << 1) +#define STM3210E_LED3 (1 << 2) +#define STM3210E_LED4 (1 << 3) + +#define ON_SETBITS_SHIFT (0) +#define ON_CLRBITS_SHIFT (4) +#define OFF_SETBITS_SHIFT (8) +#define OFF_CLRBITS_SHIFT (12) + +#define ON_BITS(v) ((v) & 0xff) +#define OFF_BITS(v) (((v) >> 8) & 0x0ff) +#define SETBITS(b) ((b) & 0x0f) +#define CLRBITS(b) (((b) >> 4) & 0x0f) + +#define ON_SETBITS(v) (SETBITS(ON_BITS(v)) +#define ON_CLRBITS(v) (CLRBITS(ON_BITS(v)) +#define OFF_SETBITS(v) (SETBITS(OFF_BITS(v)) +#define OFF_CLRBITS(v) (CLRBITS(OFF_BITS(v)) + +#define LED_STARTED_ON_SETBITS ((STM3210E_LED1) << ON_SETBITS_SHIFT) +#define LED_STARTED_ON_CLRBITS ((STM3210E_LED2|STM3210E_LED3|STM3210E_LED4) << ON_CLRBITS_SHIFT) +#define LED_STARTED_OFF_SETBITS (0 << OFF_SETBITS_SHIFT) +#define LED_STARTED_OFF_CLRBITS ((STM3210E_LED1|STM3210E_LED2|STM3210E_LED3|STM3210E_LED4) << OFF_CLRBITS_SHIFT) + +#define LED_HEAPALLOCATE_ON_SETBITS ((STM3210E_LED2) << ON_SETBITS_SHIFT) +#define LED_HEAPALLOCATE_ON_CLRBITS ((STM3210E_LED1|STM3210E_LED3|STM3210E_LED4) << ON_CLRBITS_SHIFT) +#define LED_HEAPALLOCATE_OFF_SETBITS ((STM3210E_LED1) << OFF_SETBITS_SHIFT) +#define LED_HEAPALLOCATE_OFF_CLRBITS ((STM3210E_LED2|STM3210E_LED3|STM3210E_LED4) << OFF_CLRBITS_SHIFT) + +#define LED_IRQSENABLED_ON_SETBITS ((STM3210E_LED1|STM3210E_LED2) << ON_SETBITS_SHIFT) +#define LED_IRQSENABLED_ON_CLRBITS ((STM3210E_LED3|STM3210E_LED4) << ON_CLRBITS_SHIFT) +#define LED_IRQSENABLED_OFF_SETBITS ((STM3210E_LED2) << OFF_SETBITS_SHIFT) +#define LED_IRQSENABLED_OFF_CLRBITS ((STM3210E_LED1|STM3210E_LED3|STM3210E_LED4) << OFF_CLRBITS_SHIFT) + +#define LED_STACKCREATED_ON_SETBITS ((STM3210E_LED3) << ON_SETBITS_SHIFT) +#define LED_STACKCREATED_ON_CLRBITS ((STM3210E_LED1|STM3210E_LED2|STM3210E_LED4) << ON_CLRBITS_SHIFT) +#define LED_STACKCREATED_OFF_SETBITS ((STM3210E_LED1|STM3210E_LED2) << OFF_SETBITS_SHIFT) +#define LED_STACKCREATED_OFF_CLRBITS ((STM3210E_LED3|STM3210E_LED4) << OFF_CLRBITS_SHIFT) + +#define LED_INIRQ_ON_SETBITS ((STM3210E_LED1) << ON_SETBITS_SHIFT) +#define LED_INIRQ_ON_CLRBITS ((0) << ON_CLRBITS_SHIFT) +#define LED_INIRQ_OFF_SETBITS ((0) << OFF_SETBITS_SHIFT) +#define LED_INIRQ_OFF_CLRBITS ((STM3210E_LED1) << OFF_CLRBITS_SHIFT) + +#define LED_SIGNAL_ON_SETBITS ((STM3210E_LED2) << ON_SETBITS_SHIFT) +#define LED_SIGNAL_ON_CLRBITS ((0) << ON_CLRBITS_SHIFT) +#define LED_SIGNAL_OFF_SETBITS ((0) << OFF_SETBITS_SHIFT) +#define LED_SIGNAL_OFF_CLRBITS ((STM3210E_LED2) << OFF_CLRBITS_SHIFT) + +#define LED_ASSERTION_ON_SETBITS ((STM3210E_LED4) << ON_SETBITS_SHIFT) +#define LED_ASSERTION_ON_CLRBITS ((0) << ON_CLRBITS_SHIFT) +#define LED_ASSERTION_OFF_SETBITS ((0) << OFF_SETBITS_SHIFT) +#define LED_ASSERTION_OFF_CLRBITS ((STM3210E_LED4) << OFF_CLRBITS_SHIFT) + +#define LED_PANIC_ON_SETBITS ((STM3210E_LED4) << ON_SETBITS_SHIFT) +#define LED_PANIC_ON_CLRBITS ((0) << ON_CLRBITS_SHIFT) +#define LED_PANIC_OFF_SETBITS ((0) << OFF_SETBITS_SHIFT) +#define LED_PANIC_OFF_CLRBITS ((STM3210E_LED4) << OFF_CLRBITS_SHIFT) + +/**************************************************************************** + * Private Data + ****************************************************************************/ + +static const uint16_t g_ledbits[8] = +{ + (LED_STARTED_ON_SETBITS | LED_STARTED_ON_CLRBITS | + LED_STARTED_OFF_SETBITS | LED_STARTED_OFF_CLRBITS), + + (LED_HEAPALLOCATE_ON_SETBITS | LED_HEAPALLOCATE_ON_CLRBITS | + LED_HEAPALLOCATE_OFF_SETBITS | LED_HEAPALLOCATE_OFF_CLRBITS), + + (LED_IRQSENABLED_ON_SETBITS | LED_IRQSENABLED_ON_CLRBITS | + LED_IRQSENABLED_OFF_SETBITS | LED_IRQSENABLED_OFF_CLRBITS), + + (LED_STACKCREATED_ON_SETBITS | LED_STACKCREATED_ON_CLRBITS | + LED_STACKCREATED_OFF_SETBITS | LED_STACKCREATED_OFF_CLRBITS), + + (LED_INIRQ_ON_SETBITS | LED_INIRQ_ON_CLRBITS | + LED_INIRQ_OFF_SETBITS | LED_INIRQ_OFF_CLRBITS), + + (LED_SIGNAL_ON_SETBITS | LED_SIGNAL_ON_CLRBITS | + LED_SIGNAL_OFF_SETBITS | LED_SIGNAL_OFF_CLRBITS), + + (LED_ASSERTION_ON_SETBITS | LED_ASSERTION_ON_CLRBITS | + LED_ASSERTION_OFF_SETBITS | LED_ASSERTION_OFF_CLRBITS), + + (LED_PANIC_ON_SETBITS | LED_PANIC_ON_CLRBITS | + LED_PANIC_OFF_SETBITS | LED_PANIC_OFF_CLRBITS) +}; + +/**************************************************************************** + * Private Functions + ****************************************************************************/ + +static inline void led_clrbits(unsigned int clrbits) +{ + if ((clrbits & STM3210E_LED1) != 0) + { + stm32_gpiowrite(GPIO_LED1, false); + } + + if ((clrbits & STM3210E_LED2) != 0) + { + stm32_gpiowrite(GPIO_LED2, false); + } + + if ((clrbits & STM3210E_LED3) != 0) + { + stm32_gpiowrite(GPIO_LED3, false); + } + + if ((clrbits & STM3210E_LED4) != 0) + { + stm32_gpiowrite(GPIO_LED4, false); + } +} + +static inline void led_setbits(unsigned int setbits) +{ + if ((setbits & STM3210E_LED1) != 0) + { + stm32_gpiowrite(GPIO_LED1, true); + } + + if ((setbits & STM3210E_LED2) != 0) + { + stm32_gpiowrite(GPIO_LED2, true); + } + + if ((setbits & STM3210E_LED3) != 0) + { + stm32_gpiowrite(GPIO_LED3, true); + } + + if ((setbits & STM3210E_LED4) != 0) + { + stm32_gpiowrite(GPIO_LED4, true); + } +} + +static void led_setonoff(unsigned int bits) +{ + led_clrbits(CLRBITS(bits)); + led_setbits(SETBITS(bits)); +} + +/**************************************************************************** + * Public Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: up_ledinit + ****************************************************************************/ + +void up_ledinit(void) +{ + /* Configure LED1-4 GPIOs for output */ + + stm32_configgpio(GPIO_LED1); + stm32_configgpio(GPIO_LED2); + stm32_configgpio(GPIO_LED3); + stm32_configgpio(GPIO_LED4); +} + +/**************************************************************************** + * Name: up_ledon + ****************************************************************************/ + +void up_ledon(int led) +{ + led_setonoff(ON_BITS(g_ledbits[led])); +} + +/**************************************************************************** + * Name: up_ledoff + ****************************************************************************/ + +void up_ledoff(int led) +{ + led_setonoff(OFF_BITS(g_ledbits[led])); +} + +#endif /* CONFIG_ARCH_LEDS */ diff --git a/nuttx/configs/stm32f4discovery/src/up_boot.c b/nuttx/configs/stm32f4discovery/src/up_boot.c new file mode 100644 index 000000000..791f0e5e7 --- /dev/null +++ b/nuttx/configs/stm32f4discovery/src/up_boot.c @@ -0,0 +1,90 @@ +/************************************************************************************ + * configs/stm32f4discovery/src/up_boot.c + * arch/arm/src/board/up_boot.c + * + * Copyright (C) 2011 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +#include + +#include + +#include + +#include "up_arch.h" +#include "stm32f4discovery-internal.h" + +/************************************************************************************ + * Definitions + ************************************************************************************/ + +/************************************************************************************ + * Private Functions + ************************************************************************************/ + +/************************************************************************************ + * Public Functions + ************************************************************************************/ + +/************************************************************************************ + * Name: stm32_boardinitialize + * + * Description: + * All STM32 architectures must provide the following entry point. This entry point + * is called early in the intitialization -- after all memory has been configured + * and mapped but before any devices have been initialized. + * + ************************************************************************************/ + +void stm32_boardinitialize(void) +{ + /* Configure SPI chip selects if 1) SPI is not disabled, and 2) the weak function + * stm32_spiinitialize() has been brought into the link. + */ + +#if defined(CONFIG_STM32_SPI1) || defined(CONFIG_STM32_SPI2) || defined(CONFIG_STM32_SPI3) + if (stm32_spiinitialize) + { + stm32_spiinitialize(); + } +#endif + + /* Configure on-board LEDs if LED support has been selected. */ + +#ifdef CONFIG_ARCH_LEDS + up_ledinit(); +#endif +} diff --git a/nuttx/configs/stm32f4discovery/src/up_buttons.c b/nuttx/configs/stm32f4discovery/src/up_buttons.c new file mode 100644 index 000000000..60ac6c369 --- /dev/null +++ b/nuttx/configs/stm32f4discovery/src/up_buttons.c @@ -0,0 +1,165 @@ +/**************************************************************************** + * configs/stm32f4discovery/src/up_buttons.c + * + * Copyright (C) 2011 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include + +#include + +#include +#include "stm32f4discovery-internal.h" + +#ifdef CONFIG_ARCH_BUTTONS + +/**************************************************************************** + * Definitions + ****************************************************************************/ + +/**************************************************************************** + * Private Data + ****************************************************************************/ + +/**************************************************************************** + * Private Functions + ****************************************************************************/ + +/* Pin configuration for each STM32F4 Discovery button. This array is indexed by + * the BUTTON_* definitions in board.h + */ + +static const uint16_t g_buttons[NUM_BUTTONS] = +{ + GPIO_BTN_USER +}; + +/**************************************************************************** + * Public Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: up_buttoninit + * + * Description: + * up_buttoninit() must be called to initialize button resources. After + * that, up_buttons() may be called to collect the current state of all + * buttons or up_irqbutton() may be called to register button interrupt + * handlers. + * + ****************************************************************************/ + +void up_buttoninit(void) +{ + int i; + + /* Configure the GPIO pins as inputs. NOTE that EXTI interrupts are + * configured for all pins. + */ + + for (i = 0; i < NUM_BUTTONS; i++) + { + stm32_configgpio(g_buttons[i]); + } +} + +/**************************************************************************** + * Name: up_buttons + ****************************************************************************/ + +uint8_t up_buttons(void) +{ + uint8_t ret = 0; + int i; + + /* Check that state of each key */ + + for (i = 0; i < NUM_BUTTONS; i++) + { + /* A LOW value means that the key is pressed. + */ + + bool released = stm32_gpioread(g_buttons[i]); + + /* Accumulate the set of depressed (not released) keys */ + + if (!released) + { + ret |= (1 << i); + } + } + + return ret; +} + +/************************************************************************************ + * Button support. + * + * Description: + * up_buttoninit() must be called to initialize button resources. After + * that, up_buttons() may be called to collect the current state of all + * buttons or up_irqbutton() may be called to register button interrupt + * handlers. + * + * After up_buttoninit() has been called, up_buttons() may be called to + * collect the state of all buttons. up_buttons() returns an 8-bit bit set + * with each bit associated with a button. See the BUTTON_*_BIT + * definitions in board.h for the meaning of each bit. + * + * up_irqbutton() may be called to register an interrupt handler that will + * be called when a button is depressed or released. The ID value is a + * button enumeration value that uniquely identifies a button resource. See the + * BUTTON_* definitions in board.h for the meaning of enumeration + * value. The previous interrupt handler address is returned (so that it may + * restored, if so desired). + * + ************************************************************************************/ + +#ifdef CONFIG_ARCH_IRQBUTTONS +xcpt_t up_irqbutton(int id, xcpt_t irqhandler) +{ + xcpt_t oldhandler = NULL; + + /* The following should be atomic */ + + if (id >= MIN_IRQBUTTON && id <= MAX_IRQBUTTON) + { + oldhandler = stm32_gpiosetevent(g_buttons[id], true, true, true, irqhandler); + } + return oldhandler; +} +#endif +#endif /* CONFIG_ARCH_BUTTONS */ diff --git a/nuttx/configs/stm32f4discovery/src/up_pwm.c b/nuttx/configs/stm32f4discovery/src/up_pwm.c new file mode 100644 index 000000000..02c71b503 --- /dev/null +++ b/nuttx/configs/stm32f4discovery/src/up_pwm.c @@ -0,0 +1,142 @@ +/************************************************************************************ + * configs/stm32f4discovery/src/up_pwm.c + * arch/arm/src/board/up_pwm.c + * + * Copyright (C) 2011 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +#include + +#include +#include + +#include +#include + +#include "chip.h" +#include "up_arch.h" +#include "stm32_pwm.h" +#include "stm32f4discovery-internal.h" + +/************************************************************************************ + * Definitions + ************************************************************************************/ +/* Configuration *******************************************************************/ +/* PWM + * + * The stm32f4discovery has no real on-board PWM devices, but the board can be configured to output + * a pulse train using TIM4 CH2. This pin is used by FSMC is connect to CN5 just for this + * purpose: + * + * PD13 FSMC_A18 / MC_TIM4_CH2OUT pin 33 (EnB) + * + * FSMC must be disabled in this case! + */ + +#define HAVE_PWM 1 + +#ifndef CONFIG_PWM +# undef HAVE_PWM +#endif + +#ifndef CONFIG_STM32_TIM4 +# undef HAVE_PWM +#endif + +#ifndef CONFIG_STM32_TIM4_PWM +# undef HAVE_PWM +#endif + +#if CONFIG_STM32_TIM4_CHANNEL != STM3240G_EVAL_PWMCHANNEL +# undef HAVE_PWM +#endif + +#ifdef HAVE_PWM + +/************************************************************************************ + * Private Functions + ************************************************************************************/ + +/************************************************************************************ + * Public Functions + ************************************************************************************/ + +/************************************************************************************ + * Name: pwm_devinit + * + * Description: + * All STM32 architectures must provide the following interface to work with + * examples/pwm. + * + ************************************************************************************/ + +int pwm_devinit(void) +{ + static bool initialized = false; + struct pwm_lowerhalf_s *pwm; + int ret; + + /* Have we already initialized? */ + + if (!initialized) + { + /* Call stm32_pwminitialize() to get an instance of the PWM interface */ + + pwm = stm32_pwminitialize(STM3240G_EVAL_PWMTIMER); + if (!pwm) + { + dbg("Failed to get the STM32 PWM lower half\n"); + return -ENODEV; + } + + /* Register the PWM driver at "/dev/pwm0" */ + + ret = pwm_register("/dev/pwm0", pwm); + if (ret < 0) + { + adbg("pwm_register failed: %d\n", ret); + return ret; + } + + /* Now we are initialized */ + + initialized = true; + } + + return OK; +} + +#endif /* HAVE_PWM */ diff --git a/nuttx/configs/stm32f4discovery/src/up_spi.c b/nuttx/configs/stm32f4discovery/src/up_spi.c new file mode 100644 index 000000000..9b6a0b0f5 --- /dev/null +++ b/nuttx/configs/stm32f4discovery/src/up_spi.c @@ -0,0 +1,165 @@ +/************************************************************************************ + * configs/stm3240g_eval/src/up_spi.c + * arch/arm/src/board/up_spi.c + * + * Copyright (C) 2011 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +#include + +#include +#include +#include + +#include +#include + +#include "up_arch.h" +#include "chip.h" +#include "stm32_internal.h" +#include "stm32f4discovery-internal.h" + +#if defined(CONFIG_STM32_SPI1) || defined(CONFIG_STM32_SPI2) || defined(CONFIG_STM32_SPI3) + +/************************************************************************************ + * Definitions + ************************************************************************************/ + +/* Enables debug output from this file (needs CONFIG_DEBUG too) */ + +#undef SPI_DEBUG /* Define to enable debug */ +#undef SPI_VERBOSE /* Define to enable verbose debug */ + +#ifdef SPI_DEBUG +# define spidbg lldbg +# ifdef SPI_VERBOSE +# define spivdbg lldbg +# else +# define spivdbg(x...) +# endif +#else +# undef SPI_VERBOSE +# define spidbg(x...) +# define spivdbg(x...) +#endif + +/************************************************************************************ + * Private Functions + ************************************************************************************/ + +/************************************************************************************ + * Public Functions + ************************************************************************************/ + +/************************************************************************************ + * Name: stm32_spiinitialize + * + * Description: + * Called to configure SPI chip select GPIO pins for the stm32f4discovery board. + * + ************************************************************************************/ + +void weak_function stm32_spiinitialize(void) +{ + stm32_configgpio(GPIO_SPI1_MISO); + stm32_configgpio(GPIO_SPI1_MOSI); + stm32_configgpio(GPIO_SPI1_SCK); +} + +/**************************************************************************** + * Name: stm32_spi1/2/3select and stm32_spi1/2/3status + * + * Description: + * The external functions, stm32_spi1/2/3select and stm32_spi1/2/3status must be + * provided by board-specific logic. They are implementations of the select + * and status methods of the SPI interface defined by struct spi_ops_s (see + * include/nuttx/spi.h). All other methods (including up_spiinitialize()) + * are provided by common STM32 logic. To use this common SPI logic on your + * board: + * + * 1. Provide logic in stm32_boardinitialize() to configure SPI chip select + * pins. + * 2. Provide stm32_spi1/2/3select() and stm32_spi1/2/3status() functions in your + * board-specific logic. These functions will perform chip selection and + * status operations using GPIOs in the way your board is configured. + * 3. Add a calls to up_spiinitialize() in your low level application + * initialization logic + * 4. The handle returned by up_spiinitialize() may then be used to bind the + * SPI driver to higher level logic (e.g., calling + * mmcsd_spislotinitialize(), for example, will bind the SPI driver to + * the SPI MMC/SD driver). + * + ****************************************************************************/ + +#ifdef CONFIG_STM32_SPI1 +void stm32_spi1select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected) +{ + spidbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert"); + + stm32_gpiowrite(GPIO_CS_MEMS, !selected); +} + +uint8_t stm32_spi1status(FAR struct spi_dev_s *dev, enum spi_dev_e devid) +{ + return SPI_STATUS_PRESENT; +} +#endif + +#ifdef CONFIG_STM32_SPI2 +void stm32_spi2select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected) +{ + spidbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert"); +} + +uint8_t stm32_spi2status(FAR struct spi_dev_s *dev, enum spi_dev_e devid) +{ + return SPI_STATUS_PRESENT; +} +#endif + +#ifdef CONFIG_STM32_SPI3 +void stm32_spi3select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected) +{ + spidbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert"); +} + +uint8_t stm32_spi3status(FAR struct spi_dev_s *dev, enum spi_dev_e devid) +{ + return SPI_STATUS_PRESENT; +} +#endif + +#endif /* CONFIG_STM32_SPI1 || CONFIG_STM32_SPI2 */ diff --git a/nuttx/configs/stm32f4discovery/src/up_userleds.c b/nuttx/configs/stm32f4discovery/src/up_userleds.c new file mode 100644 index 000000000..d5eb699ef --- /dev/null +++ b/nuttx/configs/stm32f4discovery/src/up_userleds.c @@ -0,0 +1,131 @@ +/**************************************************************************** + * configs/stm3240g_eval/src/up_leds.c + * arch/arm/src/board/up_leds.c + * + * Copyright (C) 2011 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include + +#include +#include +#include + +#include + +#include "chip.h" +#include "up_arch.h" +#include "up_internal.h" +#include "stm32_internal.h" +#include "stm32f4discovery-internal.h" + +#ifndef CONFIG_ARCH_LEDS + +/**************************************************************************** + * Definitions + ****************************************************************************/ + +/* Enables debug output from this file (needs CONFIG_DEBUG with + * CONFIG_DEBUG_VERBOSE too) + */ + +#undef LED_DEBUG /* Define to enable debug */ + +#ifdef LED_DEBUG +# define leddbg lldbg +# define ledvdbg llvdbg +#else +# define leddbg(x...) +# define ledvdbg(x...) +#endif + +/**************************************************************************** + * Private Data + ****************************************************************************/ +/* This array maps an LED number to GPIO pin configuration */ + +static uint32_t g_ledcfg[BOARD_NLEDS] = +{ + GPIO_LED1, GPIO_LED2, GPIO_LED3, GPIO_LED4 +}; + +/**************************************************************************** + * Private Functions + ****************************************************************************/ + +/**************************************************************************** + * Public Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: stm32_ledinit + ****************************************************************************/ + +void stm32_ledinit(void) +{ + /* Configure LED1-4 GPIOs for output */ + + stm32_configgpio(GPIO_LED1); + stm32_configgpio(GPIO_LED2); + stm32_configgpio(GPIO_LED3); + stm32_configgpio(GPIO_LED4); +} + +/**************************************************************************** + * Name: stm32_setled + ****************************************************************************/ + +void stm32_setled(int led, bool ledon) +{ + if ((unsigned)led < BOARD_NLEDS) + { + stm32_gpiowrite(g_ledcfg[led], ledon); + } +} + +/**************************************************************************** + * Name: stm32_setleds + ****************************************************************************/ + +void stm32_setleds(uint8_t ledset) +{ + stm32_gpiowrite(BOARD_LED1, (ledset & BOARD_LED1_BIT) == 0); + stm32_gpiowrite(BOARD_LED2, (ledset & BOARD_LED2_BIT) == 0); + stm32_gpiowrite(BOARD_LED3, (ledset & BOARD_LED3_BIT) == 0); + stm32_gpiowrite(BOARD_LED4, (ledset & BOARD_LED4_BIT) == 0); +} + +#endif /* !CONFIG_ARCH_LEDS */ -- cgit v1.2.3