From fb9485901d1b76029678bccaa970dfb430fb5ebd Mon Sep 17 00:00:00 2001 From: Gregory Nutt Date: Tue, 1 Apr 2014 14:13:00 -0600 Subject: SAMA5 DBGU: Add logic to suppress DBGU reconfiguration when started from a bootloader --- nuttx/configs/sama5d3-xplained/README.txt | 2 +- nuttx/configs/sama5d3-xplained/nsh/defconfig | 5 +++-- nuttx/configs/sama5d3x-ek/README.txt | 2 +- 3 files changed, 5 insertions(+), 4 deletions(-) (limited to 'nuttx/configs') diff --git a/nuttx/configs/sama5d3-xplained/README.txt b/nuttx/configs/sama5d3-xplained/README.txt index 4e05e5feb..e5f19ebb5 100644 --- a/nuttx/configs/sama5d3-xplained/README.txt +++ b/nuttx/configs/sama5d3-xplained/README.txt @@ -550,7 +550,7 @@ Load NuttX with U-Boot on AT91 boards Check this U-Boot network BuildRootFAQ entry to choose a proper MAC address: http://www.denx.de/wiki/DULG/EthernetDoesNotWork - setenv ethaddr 3e:36:65:ba:6f:be + setenv ethaddr 00:e0:de:ad:be:ef 2. Setup IP parameters: The board ip address diff --git a/nuttx/configs/sama5d3-xplained/nsh/defconfig b/nuttx/configs/sama5d3-xplained/nsh/defconfig index 08f30d5e2..0ead1922a 100644 --- a/nuttx/configs/sama5d3-xplained/nsh/defconfig +++ b/nuttx/configs/sama5d3-xplained/nsh/defconfig @@ -30,6 +30,9 @@ CONFIG_WINDOWS_CYGWIN=y CONFIG_INTELHEX_BINARY=y # CONFIG_MOTOROLA_SREC is not set CONFIG_RAW_BINARY=y +CONFIG_UBOOT_UIMAGE=y +CONFIG_UIMAGE_LOAD_ADDRESS=0x20008000 +CONFIG_UIMAGE_ENTRY_POINT=0x20008000 # # Customize Header Files @@ -429,8 +432,6 @@ CONFIG_SERIAL=y # # CONFIG_MCU_SERIAL is not set CONFIG_STANDARD_SERIAL=y -# CONFIG_USART1_SERIAL_CONSOLE is not set -# CONFIG_NO_SERIAL_CONSOLE is not set # CONFIG_SERIAL_IFLOWCONTROL is not set # CONFIG_SERIAL_OFLOWCONTROL is not set # CONFIG_USBDEV is not set diff --git a/nuttx/configs/sama5d3x-ek/README.txt b/nuttx/configs/sama5d3x-ek/README.txt index e1ac624fa..728356110 100644 --- a/nuttx/configs/sama5d3x-ek/README.txt +++ b/nuttx/configs/sama5d3x-ek/README.txt @@ -671,7 +671,7 @@ Load NuttX with U-Boot on AT91 boards Check this U-Boot network BuildRootFAQ entry to choose a proper MAC address: http://www.denx.de/wiki/DULG/EthernetDoesNotWork - setenv ethaddr 3e:36:65:ba:6f:be + setenv ethaddr 00:e0:de:ad:be:ef 2. Setup IP parameters: The board ip address -- cgit v1.2.3