From 0432aa72902865f16adfca70e682263324e7f868 Mon Sep 17 00:00:00 2001 From: Gregory Nutt Date: Sun, 16 Nov 2014 08:18:56 -0600 Subject: Rename CONFIG_NET_BUFSIZE to CONFIG_NET_ETH_MTU in all configs/ README.txt files --- nuttx/configs/olimex-lpc1766stk/README.txt | 2 +- nuttx/configs/sam4e-ek/README.txt | 4 ++-- nuttx/configs/sama5d3-xplained/README.txt | 4 ++-- nuttx/configs/sama5d3x-ek/README.txt | 4 ++-- nuttx/configs/sama5d4-ek/README.txt | 4 ++-- nuttx/configs/twr-k60n512/README.txt | 4 ++-- nuttx/configs/viewtool-stm32f107/README.txt | 2 +- 7 files changed, 12 insertions(+), 12 deletions(-) (limited to 'nuttx') diff --git a/nuttx/configs/olimex-lpc1766stk/README.txt b/nuttx/configs/olimex-lpc1766stk/README.txt index 9e922940c..10faa5509 100644 --- a/nuttx/configs/olimex-lpc1766stk/README.txt +++ b/nuttx/configs/olimex-lpc1766stk/README.txt @@ -1044,7 +1044,7 @@ Configuration Sub-Directories use the UART1 hardware flow control yet. NOTE: The Linux slip module hard-codes its MTU size to 296. So you - might as well set CONFIG_NET_BUFSIZE to 296 as well. + might as well set CONFIG_NET_ETH_MTU to 296 as well. 4. After turning over the line to the SLIP driver, you must configure the network interface. Again, you do this using the standard diff --git a/nuttx/configs/sam4e-ek/README.txt b/nuttx/configs/sam4e-ek/README.txt index fa35c7991..fa2a00c77 100644 --- a/nuttx/configs/sam4e-ek/README.txt +++ b/nuttx/configs/sam4e-ek/README.txt @@ -419,8 +419,8 @@ Networking Support Networking Support CONFIG_NET=y : Enable Neworking CONFIG_NET_SOCKOPTS=y : Enable socket operations - CONFIG_NET_BUFSIZE=562 : Maximum packet size (MTD) 1518 is more standard - CONFIG_NET_RECEIVE_WINDOW=536 : Should be the same as CONFIG_NET_BUFSIZE + CONFIG_NET_ETH_MTU=562 : Maximum packet size (MTU) 1518 is more standard + CONFIG_NET_RECEIVE_WINDOW=536 : Should be the same as CONFIG_NET_ETH_MTU CONFIG_NET_TCP=y : Enable TCP/IP networking CONFIG_NET_TCPBACKLOG=y : Support TCP/IP backlog CONFIG_NET_TCP_READAHEAD_BUFSIZE=536 Read-ahead buffer size diff --git a/nuttx/configs/sama5d3-xplained/README.txt b/nuttx/configs/sama5d3-xplained/README.txt index 589f307b1..e487a083e 100644 --- a/nuttx/configs/sama5d3-xplained/README.txt +++ b/nuttx/configs/sama5d3-xplained/README.txt @@ -798,8 +798,8 @@ Networking Networking Support CONFIG_NET=y : Enable Neworking CONFIG_NET_SOCKOPTS=y : Enable socket operations - CONFIG_NET_BUFSIZE=562 : Maximum packet size (MTD) 1518 is more standard - CONFIG_NET_RECEIVE_WINDOW=562 : Should be the same as CONFIG_NET_BUFSIZE + CONFIG_NET_ETH_MTU=562 : Maximum packet size (MTU) 1518 is more standard + CONFIG_NET_RECEIVE_WINDOW=562 : Should be the same as CONFIG_NET_ETH_MTU CONFIG_NET_TCP=y : Enable TCP/IP networking CONFIG_NET_TCPBACKLOG=y : Support TCP/IP backlog CONFIG_NET_TCP_READAHEAD_BUFSIZE=562 : Read-ahead buffer size diff --git a/nuttx/configs/sama5d3x-ek/README.txt b/nuttx/configs/sama5d3x-ek/README.txt index 854fe4e5d..71d56dec4 100644 --- a/nuttx/configs/sama5d3x-ek/README.txt +++ b/nuttx/configs/sama5d3x-ek/README.txt @@ -959,8 +959,8 @@ Networking Networking Support CONFIG_NET=y : Enable Neworking CONFIG_NET_SOCKOPTS=y : Enable socket operations - CONFIG_NET_BUFSIZE=562 : Maximum packet size (MTD) 1518 is more standard - CONFIG_NET_RECEIVE_WINDOW=562 : Should be the same as CONFIG_NET_BUFSIZE + CONFIG_NET_ETH_MTU=562 : Maximum packet size (MTU) 1518 is more standard + CONFIG_NET_RECEIVE_WINDOW=562 : Should be the same as CONFIG_NET_ETH_MTU CONFIG_NET_TCP=y : Enable TCP/IP networking CONFIG_NET_TCPBACKLOG=y : Support TCP/IP backlog CONFIG_NET_TCP_READAHEAD_BUFSIZE=562 : Read-ahead buffer size diff --git a/nuttx/configs/sama5d4-ek/README.txt b/nuttx/configs/sama5d4-ek/README.txt index 3d34a9ded..112550145 100644 --- a/nuttx/configs/sama5d4-ek/README.txt +++ b/nuttx/configs/sama5d4-ek/README.txt @@ -1335,8 +1335,8 @@ Networking Networking Support CONFIG_NET=y : Enable Neworking CONFIG_NET_SOCKOPTS=y : Enable socket operations - CONFIG_NET_BUFSIZE=562 : Maximum packet size (MTD) 1518 is more standard - CONFIG_NET_RECEIVE_WINDOW=562 : Should be the same as CONFIG_NET_BUFSIZE + CONFIG_NET_ETH_MTU=562 : Maximum packet size (MTU) 1518 is more standard + CONFIG_NET_RECEIVE_WINDOW=562 : Should be the same as CONFIG_NET_ETH_MTU CONFIG_NET_ARP=y : ARP support should be enabled CONFIG_NET_ARP_IPIN=y : IP address harvesting (optional) CONFIG_NET_TCP=y : Enable TCP/IP networking diff --git a/nuttx/configs/twr-k60n512/README.txt b/nuttx/configs/twr-k60n512/README.txt index 1979b4224..159b09ec0 100644 --- a/nuttx/configs/twr-k60n512/README.txt +++ b/nuttx/configs/twr-k60n512/README.txt @@ -634,9 +634,9 @@ TWR-K60N512-specific Configuration Options Kenetis ethernet controller settings CONFIG_ENET_NRXBUFFERS - Number of RX buffers. The size of one - buffer is determined by CONFIG_NET_BUFSIZE. Default: 6 + buffer is determined by CONFIG_NET_ETH_MTU. Default: 6 CONFIG_ENET_NTXBUFFERS - Number of TX buffers. The size of one - buffer is determined by CONFIG_NET_BUFSIZE. Default: 2 + buffer is determined by CONFIG_NET_ETH_MTU. Default: 2 CONFIG_ENET_USEMII - Use MII mode. Default: RMII mode. CONFIG_ENET_PHYADDR - PHY address diff --git a/nuttx/configs/viewtool-stm32f107/README.txt b/nuttx/configs/viewtool-stm32f107/README.txt index ea7d10e2a..5b7a3705f 100644 --- a/nuttx/configs/viewtool-stm32f107/README.txt +++ b/nuttx/configs/viewtool-stm32f107/README.txt @@ -371,7 +371,7 @@ ViewTool DP83848 Ethernet Module CONFIG_NSOCKET_DESCRIPTORS=10 : Socket-related CONFIG_NET_SOCKOPTS=y - CONFIG_NET_BUFSIZE=650 : Maximum packet size + CONFIG_NET_ETH_MTU=650 : Maximum packet size CONFIG_NET_RECEIVE_WINDOW=650 CONFIG_NET_TCP_READAHEAD=y : Enable read-ahead buffering CONFIG_NET_TCP_READAHEAD_BUFSIZE=650 -- cgit v1.2.3