From bb13faa2c0639b81b425d71c6b7f6d3958cc9898 Mon Sep 17 00:00:00 2001 From: patacongo Date: Sat, 17 Oct 2009 21:14:47 +0000 Subject: Calibrate stm32 delay loop git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@2150 42af7a65-404d-4744-a932-0658087f49c3 --- nuttx/configs/eagle100/httpd/defconfig | 4 ++-- nuttx/configs/eagle100/nettest/defconfig | 4 ++-- nuttx/configs/eagle100/nsh/defconfig | 4 ++-- nuttx/configs/eagle100/nxflat/defconfig | 4 ++-- nuttx/configs/eagle100/ostest/defconfig | 4 ++-- nuttx/configs/eagle100/thttpd/defconfig | 4 ++-- nuttx/configs/stm3210e-eval/RIDE/defconfig | 8 ++++---- nuttx/configs/stm3210e-eval/nsh/defconfig | 8 ++++---- nuttx/configs/stm3210e-eval/ostest/defconfig | 8 ++++---- 9 files changed, 24 insertions(+), 24 deletions(-) (limited to 'nuttx') diff --git a/nuttx/configs/eagle100/httpd/defconfig b/nuttx/configs/eagle100/httpd/defconfig index d36489d43..d6ae777cd 100644 --- a/nuttx/configs/eagle100/httpd/defconfig +++ b/nuttx/configs/eagle100/httpd/defconfig @@ -64,8 +64,8 @@ # CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that # cause a 100 second delay during boot-up. This 100 second delay # serves no purpose other than it allows you to calibratre -# CONFIG_ARCH_LOOPSPERMSEC. You simply use a stop watch to measure -# the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until +# CONFIG_BOARD_LOOPSPERMSEC. You simply use a stop watch to measure +# the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until # the delay actually is 100 seconds. # CONFIG_ARCH=arm diff --git a/nuttx/configs/eagle100/nettest/defconfig b/nuttx/configs/eagle100/nettest/defconfig index 27ce4e73c..c57b5a6f0 100644 --- a/nuttx/configs/eagle100/nettest/defconfig +++ b/nuttx/configs/eagle100/nettest/defconfig @@ -64,8 +64,8 @@ # CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that # cause a 100 second delay during boot-up. This 100 second delay # serves no purpose other than it allows you to calibratre -# CONFIG_ARCH_LOOPSPERMSEC. You simply use a stop watch to measure -# the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until +# CONFIG_BOARD_LOOPSPERMSEC. You simply use a stop watch to measure +# the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until # the delay actually is 100 seconds. # CONFIG_ARCH=arm diff --git a/nuttx/configs/eagle100/nsh/defconfig b/nuttx/configs/eagle100/nsh/defconfig index d49b9834f..d77c8b281 100644 --- a/nuttx/configs/eagle100/nsh/defconfig +++ b/nuttx/configs/eagle100/nsh/defconfig @@ -64,8 +64,8 @@ # CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that # cause a 100 second delay during boot-up. This 100 second delay # serves no purpose other than it allows you to calibratre -# CONFIG_ARCH_LOOPSPERMSEC. You simply use a stop watch to measure -# the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until +# CONFIG_BOARD_LOOPSPERMSEC. You simply use a stop watch to measure +# the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until # the delay actually is 100 seconds. # CONFIG_ARCH=arm diff --git a/nuttx/configs/eagle100/nxflat/defconfig b/nuttx/configs/eagle100/nxflat/defconfig index 8c64c616f..291ecf074 100644 --- a/nuttx/configs/eagle100/nxflat/defconfig +++ b/nuttx/configs/eagle100/nxflat/defconfig @@ -64,8 +64,8 @@ # CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that # cause a 100 second delay during boot-up. This 100 second delay # serves no purpose other than it allows you to calibratre -# CONFIG_ARCH_LOOPSPERMSEC. You simply use a stop watch to measure -# the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until +# CONFIG_BOARD_LOOPSPERMSEC. You simply use a stop watch to measure +# the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until # the delay actually is 100 seconds. # CONFIG_ARCH=arm diff --git a/nuttx/configs/eagle100/ostest/defconfig b/nuttx/configs/eagle100/ostest/defconfig index 5bf355cb8..8216e3b70 100644 --- a/nuttx/configs/eagle100/ostest/defconfig +++ b/nuttx/configs/eagle100/ostest/defconfig @@ -64,8 +64,8 @@ # CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that # cause a 100 second delay during boot-up. This 100 second delay # serves no purpose other than it allows you to calibratre -# CONFIG_ARCH_LOOPSPERMSEC. You simply use a stop watch to measure -# the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until +# CONFIG_BOARD_LOOPSPERMSEC. You simply use a stop watch to measure +# the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until # the delay actually is 100 seconds. # CONFIG_ARCH=arm diff --git a/nuttx/configs/eagle100/thttpd/defconfig b/nuttx/configs/eagle100/thttpd/defconfig index c1ad521c5..dfbf14f9c 100644 --- a/nuttx/configs/eagle100/thttpd/defconfig +++ b/nuttx/configs/eagle100/thttpd/defconfig @@ -64,8 +64,8 @@ # CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that # cause a 100 second delay during boot-up. This 100 second delay # serves no purpose other than it allows you to calibratre -# CONFIG_ARCH_LOOPSPERMSEC. You simply use a stop watch to measure -# the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until +# CONFIG_BOARD_LOOPSPERMSEC. You simply use a stop watch to measure +# the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until # the delay actually is 100 seconds. # CONFIG_ARCH=arm diff --git a/nuttx/configs/stm3210e-eval/RIDE/defconfig b/nuttx/configs/stm3210e-eval/RIDE/defconfig index 69836b9a2..8dd155c99 100755 --- a/nuttx/configs/stm3210e-eval/RIDE/defconfig +++ b/nuttx/configs/stm3210e-eval/RIDE/defconfig @@ -62,9 +62,9 @@ # CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture. # CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that # cause a 100 second delay during boot-up. This 100 second delay -# serves no purpose other than it allows you to calibratre -# CONFIG_ARCH_LOOPSPERMSEC. You simply use a stop watch to measure -# the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until +# serves no purpose other than it allows you to calibrate +# CONFIG_BOARD_LOOPSPERMSEC. You simply use a stop watch to measure +# the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until # the delay actually is 100 seconds. # CONFIG_ARCH=arm @@ -74,7 +74,7 @@ CONFIG_ARCH_CHIP=stm32 CONFIG_ARCH_CHIP_STM32F103ZET6=y CONFIG_ARCH_BOARD=stm3210e-eval CONFIG_ARCH_BOARD_STM3210E_EVAL=y -CONFIG_BOARD_LOOPSPERMSEC=4531 +CONFIG_BOARD_LOOPSPERMSEC=5483 CONFIG_DRAM_SIZE=0x00010000 CONFIG_DRAM_START=0x20000000 CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) diff --git a/nuttx/configs/stm3210e-eval/nsh/defconfig b/nuttx/configs/stm3210e-eval/nsh/defconfig index 1ad71ef60..18fab2704 100755 --- a/nuttx/configs/stm3210e-eval/nsh/defconfig +++ b/nuttx/configs/stm3210e-eval/nsh/defconfig @@ -62,9 +62,9 @@ # CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture. # CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that # cause a 100 second delay during boot-up. This 100 second delay -# serves no purpose other than it allows you to calibratre -# CONFIG_ARCH_LOOPSPERMSEC. You simply use a stop watch to measure -# the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until +# serves no purpose other than it allows you to calibrate +# CONFIG_BOARD_LOOPSPERMSEC. You simply use a stop watch to measure +# the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until # the delay actually is 100 seconds. # CONFIG_ARCH=arm @@ -74,7 +74,7 @@ CONFIG_ARCH_CHIP=stm32 CONFIG_ARCH_CHIP_STM32F103ZET6=y CONFIG_ARCH_BOARD=stm3210e-eval CONFIG_ARCH_BOARD_STM3210E_EVAL=y -CONFIG_BOARD_LOOPSPERMSEC=4531 +CONFIG_BOARD_LOOPSPERMSEC=5483 CONFIG_DRAM_SIZE=0x00010000 CONFIG_DRAM_START=0x20000000 CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) diff --git a/nuttx/configs/stm3210e-eval/ostest/defconfig b/nuttx/configs/stm3210e-eval/ostest/defconfig index f490ea9fc..417dc5384 100755 --- a/nuttx/configs/stm3210e-eval/ostest/defconfig +++ b/nuttx/configs/stm3210e-eval/ostest/defconfig @@ -62,9 +62,9 @@ # CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture. # CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that # cause a 100 second delay during boot-up. This 100 second delay -# serves no purpose other than it allows you to calibratre -# CONFIG_ARCH_LOOPSPERMSEC. You simply use a stop watch to measure -# the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until +# serves no purpose other than it allows you to calibrate +# CONFIG_BOARD_LOOPSPERMSEC. You simply use a stop watch to measure +# the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until # the delay actually is 100 seconds. # CONFIG_ARCH=arm @@ -74,7 +74,7 @@ CONFIG_ARCH_CHIP=stm32 CONFIG_ARCH_CHIP_STM32F103ZET6=y CONFIG_ARCH_BOARD=stm3210e-eval CONFIG_ARCH_BOARD_STM3210E_EVAL=y -CONFIG_BOARD_LOOPSPERMSEC=4531 +CONFIG_BOARD_LOOPSPERMSEC=5483 CONFIG_DRAM_SIZE=0x00010000 CONFIG_DRAM_START=0x20000000 CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) -- cgit v1.2.3