NuttX RTOSLast Updated: January 1, 2012 |
Table of Contents |
|
Overview |
Goals. Nuttx is a real timed embedded operating system (RTOS). Its goals are:
Small Footprint | |
Usable in all but the tightest micro-controller environments, The focus is on the tiny-to-small, deeply embedded environment. | |
Rich Feature OS Set | |
The goal is to provide implementations of most standard POSIX OS interfaces to support a rich, multi-threaded development environment for deeply embedded processors. NON-GOALS: (1) It is not a goal to provide the rich level of OS features like those provided with Linux. Small footprint is more important than features. Standard compliance is more important than small footprint. (2) There is no MMU-based support for processes. At present, NuttX assumes a flat address space. | |
Highly Scalable | |
Fully scalable from tiny (8-bit) to moderate embedded (32-bit). Scalability with rich feature set is accomplished with: Many tiny source files, link from static libraries, highly configurable, use of weak symbols when available. | |
Standards Compliance | |
NuttX strives to achieve a high degree of standards compliance.
The primary governing standards are POSIX and ANSI standards.
Additional standard APIs from Unix and other common RTOS's are
adopted for functionality not available under these standards
or for functionality that is not appropriate for the deeply-embedded
RTOS (such as Because of this standards conformance, software developed under other standard OSs (such as Linux) should port easily to NuttX. | |
Real-Time | |
Fully pre-emptible, fixed priority and round-robin scheduling. | |
Totally Open | |
Non-restrictive BSD license. | |
GNU Toolchains | |
Compatible GNU toolchains based on buildroot available for download to provide a complete development environment for many architectures. |
Feature Set. Key features of NuttX include:
Standards Compliant Core Task Management | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
File system | |
| |
| |
| |
| |
| |
| |
| |
1
FAT long file name support may be subject to certain Microsoft patent restrictions if enabled.
See the top-level | |
Device Drivers | |
| |
| |
/dev/null , /dev/zero , and loop drivers.
| |
| |
| |
C Library | |
| |
Networking | |
| |
| |
| |
| |
| |
| |
FLASH Support | |
| |
| |
| |
| |
USB Host Support | |
| |
| |
| |
USB Device Support | |
| |
| |
| |
| |
Graphics Support | |
| |
| |
| |
| |
Input Devices | |
|
NuttX Add-Ons. The following packages are available to extend the basic NuttX feature set:
NuttShell (NSH) | |
| |
Pascal Compiler with NuttX runtime P-Code interpreter add-on | |
|
Look at all those files and features... How can it be a tiny OS?. The NuttX feature list (above) is fairly long and if you look at the NuttX source tree, you will see that there are hundreds of source files comprising NuttX. How can NuttX be a tiny OS with all of that?
Lots of Features -- More can be smaller! | |
The philosophy behind that NuttX is that lots of features are great... BUT also that if you don't use those features, then you should not have to pay a penalty for the unused features. And, with NuttX, you don't! If you don't use a feature, it will not be included in the final executable binary. You only have to pay the penalty of increased footprint for the features that you actually use. Using a variety of technologies, NuttX can scale from the very tiny to the moderate-size system. I have executed NuttX with some simple applications in as little as 32Kb total memory (code and data). On the other hand, typical, richly featured NuttX builds require more like 64Kb (and if all of the features are used, this can push 100Kb). |
|
Many, many files -- More really is smaller! | |
One may be intimidated by the size NuttX source tree. There are hundreds of source files! How can that be a tiny OS? Actually, the large number of files is one of the tricks to keep NuttX small and as scalable as possible. Most files contain only a single function. Sometimes just one tiny function with only a few lines of code. Why?
|
|
Other Tricks | |
As mentioned above, the use of many, tiny source files and linking from static libraries keeps the size of NuttX down. Other tricks used in NuttX include:
|
NuttX Discussion Group |
Most Nuttx-related discussion occurs on the Yahoo! NuttX group. You are cordially invited to join. I make a special effort to answer any questions and provide any help that I can.
Downloads |
The 80th release of NuttX, Version 6.13, was made on December 26, 2011, and is available for download from the
SourceForge website.
Note that the release consists of two tarballs: nuttx-6.13.tar.gz
and apps-6.13.tar.gz
.
Both may be needed (see the top-level nuttx/README.txt
file for build information)
The change log associated with the release is available here.
Unreleased changes after this release are available in SVN.
These unreleased changes are also listed here.
New features in this release include:
Bugfixes, order roughly on decreasing criticality include the following. Both of these bugfixes are considered critical.
See the ChangeLog for details.
Supported Platforms |
The short story (Number of ports follow in parentheses). The state of the various ports vary from board-to-board. Follow the links for the details:
|
|
|
The details, caveats and fine print follow:
Linux User Mode. | |
A user-mode port of NuttX to the x86 Linux/Cygwin platform is available. The purpose of this port is primarily to support OS feature development. STATUS: Does not support interrupts but is otherwise fully functional. |
|
ARM7TDMI. | |
TI TMS320C5471 (also called C5471 or TMS320DA180 or DA180). NuttX operates on the ARM7 of this dual core processor. This port uses the Spectrum Digital evaluation board with a GNU arm-elf toolchain* under Linux or Cygwin. STATUS: This port is complete, verified, and included in the initial NuttX release. |
|
NXP LPC214x. Support is provided for the NXP LPC214x family of processors. In particular, support is provided for the mcu123.com lpc214x evaluation board (LPC2148). This port also used the GNU arm-elf toolchain* under Linux or Cygwin. STATUS: This port boots and passes the OS test (apps/examples/ostest). The port is complete and verified. As of NuttX 0.3.17, the port includes: timer interrupts, serial console, USB driver, and SPI-based MMC/SD card support. A verified NuttShell (NSH) configuration is also available. Development Environments: 1) Linux with native Linux GNU toolchain, 2) Cygwin with Cygwin GNU toolchain, or 3) Cygwin with Windows native toolchain (CodeSourcery or devkitARM). A DIY toolchain for Linux or Cygwin is provided by the NuttX buildroot package. |
|
NXP LPC2378. Support is provided for the NXP LPC2378 MCU. In particular, support is provided for the Olimex-LPC2378 development board. This port was contributed by Rommel Marcelo is was first released in NuttX-5.3. This port also used the GNU arm-elf toolchain* under Linux or Cygwin. STATUS: This port boots and passes the OS test (apps/examples/ostest) and includes a working implementation of the NuttShell (NSH). The port is complete and verified. As of NuttX 5.3, the port includes only basic timer interrupts and serial console support. Development Environments: (Same as for the NXP LPC214x). |
|
STMicro STR71x. Support is provided for the STMicro STR71x family of processors. In particular, support is provided for the Olimex STR-P711 evaluation board. This port also used the GNU arm-elf toolchain* under Linux or Cygwin. STATUS: Integration is complete on the basic port (boot logic, system time, serial console). Two configurations have been verified: (1) The board boots and passes the OS test with console output visible on UART0, and the NuttShell (NSH) is fully functional with interrupt driven serial console. An SPI driver is available but only partially tested. Additional features are needed: USB driver, MMC integration, to name two (the slot on the board appears to accept on MMC card dimensions; I have only SD cards). An SPI-based ENC29J60 Ethernet driver for add-on hardware is under development and should be available in the NuttX 5.5 release. Development Environments: 1) Linux with native Linux GNU toolchain, 2) Cygwin with Cygwin GNU toolchain, or 3) Cygwin with Windows native toolchain (CodeSourcery or devkitARM). A DIY toolchain for Linux or Cygwin is provided by the NuttX buildroot package. |
|
ARM920T. | |
Freescale MC9328MX1 or i.MX1. This port uses the Freescale MX1ADS development board with a GNU arm-elf toolchain* under either Linux or Cygwin. STATUS: This port has stalled due to development tool issues. Coding is complete on the basic port (timer, serial console, SPI). |
|
ARM926EJS. | |
TI TMS320DM320 (also called DM320). NuttX operates on the ARM9 of this dual core processor. This port uses the Neuros OSD with a GNU arm-elf toolchain* under Linux or Cygwin. The port was performed using the OSD v1.0, development board. STATUS: The basic port (timer interrupts, serial ports, network, framebuffer, etc.) is complete. All implemented features have been verified with the exception of the USB device-side driver; that implementation is complete but untested. |
|
NXP LPC3131.
The port for the NXP LPC3131 on the Embedded Artists EA3131
development board was first released in NuttX-5.1 with a GNU arm-elf or arm-eabi toolchain* under Linux or Cygwin
(but was not functional until NuttX-5.2).
STATUS: The basic EA3131 port is complete and verified in NuttX-5.2 This basic port includes basic boot-up, serial console, and timer interrupts. This port was extended in NuttX 5.3 with a USB high speed driver contributed by David Hewson. David also contributed I2C and SPI drivers plus several important LPC313x USB bug fixes that appear in the NuttX 5.6 release. This port has been verified using the NuttX OS test, USB serial and mass storage tests and includes a working implementation of the NuttShell (NSH). Support for on-demand paging has been developed for the EA3131. That support would all execute of a program in SPI FLASH by paging code sections out of SPI flash as needed. However, as of this writing, I have not had the opportunity to verify this new feature. |
|
NXP LPC315x.
Support for the NXP LPC315x family has been incorporated into the code base as of NuttX-6.4.
Support has added for the Embedded Artists EA3152 board in NuttX-6.11.
STATUS: Basic support is in place for both the LPC3152 MCU and the EA3152 board. Verification of the port was deferred due to tool issues However, because of the high degree of compatibility between the LPC313x and LPC315x family, it is very likely that the support is in place (or at least very close). At this point, verification of the EA3152 port has been overcome by events and may never happen. However, the port is available for anyone who may want to use it. |
|
ARM Cortex-M3. | |
Luminary/TI LM3S6918. This port uses the Micromint Eagle-100 development board with a GNU arm-elf toolchain* under either Linux or Cygwin. STATUS: The initial, release of this port was included in NuttX version 0.4.6. The current port includes timer, serial console, Ethernet, SSI, and microSD support. There are working configurations the NuttX OS test, to run the NuttShell (NSH), the NuttX networking test, and the uIP web server. Development Environments: 1) Linux with native Linux GNU toolchain, 2) Cygwin with Cygwin GNU toolchain, or 3) Cygwin with Windows native toolchain (CodeSourcery or devkitARM). A DIY toolchain for Linux or Cygwin is provided by the NuttX buildroot package. |
|
Luminary/TI LM3S6965. This port uses the Stellaris LM3S6965 Ethernet Evalution Kit with a GNU arm-elf toolchain* under either Linux or Cygwin. STATUS: This port was released in NuttX 5.5. Features are the same as with the Eagle-100 LM3S6918 described above. The apps/examples/ostest configuration has been successfully verified and an NSH configuration with telnet support is available. MMC/SD and Networking support was not been thoroughly verified: Current development efforts are focused on porting the NuttX window system (NX) to work with the Evaluation Kits OLED display. NOTE: As it is configured now, you MUST have a network connected. Otherwise, the NSH prompt will not come up because the Ethernet driver is waiting for the network to come up. Development Environments: See the Eagle-100 LM3S6918 above. |
|
Luminary/TI LM3S8962. This port uses the Stellaris EKC-LM3S8962 Ethernet+CAN Evalution Kit with a GNU arm-elf toolchain* under either Linux or Cygwin. Contributed by Larry Arnold. STATUS: This port was released in NuttX 5.10. Features are the same as with the Eagle-100 LM3S6918 described above. |
|
Luminary/TI LM3S9B96. Header file support was contributed by Tiago Maluta for this part. However, no complete board support configuration is available as of this writing. |
|
STMicro STM32F103x. Support for four MCUs and three board configurations are available. MCU support includes: STM32F103ZET6, STM32F103RET6, STM32F103VCT, and STM32F107VC. Boards supported include:
These ports uses a GNU arm-elf toolchain* under either Linux or Cygwin (with native Windows GNU tools or Cygwin-based GNU tools).
STATUS: Development Environments: 1) Linux with native Linux GNU toolchain, 2) Cygwin with Cygwin GNU toolchain, or 3) Cygwin with Windows native toolchain (RIDE7, CodeSourcery or devkitARM). A DIY toolchain for Linux or Cygwin is provided by the NuttX buildroot package. |
|
Atmel AT91SAM3U. This port uses the Atmel SAM3U-EK development board that features the AT91SAM3U4E MCU. This port uses a GNU arm-elf or arm-eabi toolchain* under either Linux or Cygwin (with native Windows GNU tools or Cygwin-based GNU tools). STATUS: The basic SAM3U-EK port was released in NuttX version 5.1. The basic port includes boot-up logic, interrupt driven serial console, and system timer interrupts. That release passes the NuttX OS test and is proven to have a valid OS implementation. A configuration to support the NuttShell is also included. NuttX version 5.4 adds support for the HX8347 LCD on the SAM3U-EK board. This LCD support includes an example using the NX graphics system. NuttX version 6.10 adds SPI support. Subsequent NuttX releases will extend this port and add support for SDIO-based SD cards and USB device (and possible LCD support). These extensions may or may not happen soon as my plate is kind of full now. Development Environments: 1) Linux with native Linux GNU toolchain, 2) Cygwin with Cygwin GNU toolchain, or 3) Cygwin with Windows native toolchain (CodeSourcery or devkitARM). A DIY toolchain for Linux or Cygwin is provided by the NuttX buildroot package. |
|
NXP LPC1766 and LPC1768. Drivers are available for CAN, DAC, Ethernet, GPIO, GPIO interrupts, I2C, UARTs, SPI, SSP, USB host, and USB device. Verified LPC17xx onfigurations are available for three boards.
The Nucleus 2G board, the mbed board, and the LPCXpresso all feature the NXP LPC1768 MCU; the Olimex LPC1766-STK board features an LPC1766. All use a GNU arm-elf or arm-eabi toolchain* under either Linux or Cygwin (with native Windows GNU tools or Cygwin-based GNU tools).
STATUS: The following summarizes the features that has been developed and verified on individual LPC17xx-based boards. These features should, however, be common and available for all LPC17xx-based boards. Development Environments: 1) Linux with native Linux GNU toolchain, 2) Cygwin with Cygwin GNU toolchain, or 3) Cygwin with Windows native toolchain (CodeSourcery devkitARM or Code Red). A DIY toolchain for Linux or Cygwin is provided by the NuttX buildroot package. |
|
ARM Cortex-M4. | |
FreeScale Kinetics K40. This port uses the Freescale Kinetis KwikStik K40. Refer to the Freescale web site for further information about this board. The Kwikstik is used with the FreeScale Tower System (mostly just to provide a simple UART connection) STATUS: The unverified KwikStik K40 first appeared in NuttX-6.8 As of this writing, the basic port is complete but I accidentally locked my board during the initial bringup. Further development is stalled unless I learn how to unlock the device (or until I get another K40). Additional work remaining includes, among other things: (1) complete the basic bring-up, (2) bring up the NuttShell NSH, (3) develop support for the SDHC-based SD card, (4) develop support for USB host and device, and (2) develop an LCD driver. NOTE: Some of these remaining tasks are shared with the K60 work described below. |
|
FreeScale Kinetics K60. This port uses the Freescale Kinetis TWR-K60N512 tower system. Refer to the Freescale web site for further information about this board. The TWR-K60N51 includes with the FreeScale Tower System which provides (among other things) a DBP UART connection. STATUS: As of this writing, the basic port is complete and passes the NuttX OS test. An additional, validated configuration exists for the NuttShell (NSH, see the NSH User Guide). This basic TWR-K60N512 first appeared in NuttX-6.8. Ethernet and SD card (SDHC) drivers also exist: The SDHC driver is partially integrated in to the NSH configuration but has some outstanding issues; the Ethernet driver is completely untested. Additional work remaining includes: (1) integrate the Ethernet and SDHC drivers, and (2) develop support for USB host and device. NOTE: Most of these remaining tasks (excluding the Ethernet driver) are the same as the pending K40 tasks described above. |
|
STMicro STM3240G-EVAL. This port uses the Freescale STMicro STM3240G-EVAL board featuring the STM32F407IGH6 MCU. Refer to the STMicro web site for further information about this board. STATUS: As of this writing, the basic port is complete and first appeared in NuttX-6.12. The port passes the NuttX OS test and includes a validated configuration for the NuttShell (NSH, see the NSH User Guide). Additional drivers and configurations were added in NuttX 6.13. Drivers include an Ethernet driver, ADC driver, DAC driver, PWM driver, CAN driver, F4 RTC driver (most of these are compatible with the F1 family as well). That release also included F4 DMA support and logic for saving/restoring F4 FPU registers in context switches. Networking intensions include support for Telnet NSH sessions and new configurations for DHPCD and the networking test (nettest). A more complete port would include support for SDIO and USB OTG which are not available in NuttX 6.13. |
|
STMicro STM32F4-Discovery. This port is just beginning and is not yet available. It will used the STMicor STM32F4-Discovery board featuring the STM32F407VGT6 MCU. Refer to the STMicro web site for further information about this board. STATUS: This is really a vapor ware, pre-announcement. I have the hardware and the motivation and I expect to announce the availability of support the STM32F4-Discovery in a later NuttX release. |
|
Development Environments: 1) Linux with native Linux GNU toolchain, 2) Cygwin with Cygwin GNU Cortex-M3 or 4toolchain, or 3) Cygwin with Windows native GNU Cortex-M3 or M4 toolchain (CodeSourcery or devkitARM). A DIY toolchain for Linux or Cygwin is provided by the NuttX buildroot package. I use FreeScale's CodeWarrior IDE only to work with the JTAG debugger built into the boards. |
|
Atmel AVR. | |
SoC Robotics ATMega128. This port of NuttX to the Amber Web Server from SoC Robotics is partially completed. The Amber Web Server is based on an Atmel ATMega128. STATUS: Work on this port has stalled due to toolchain issues. Complete, but untested code for this port appears in the NuttX 6.5 release. |
|
Micropendous 3 AT9USB64x and AT9USB6128x. This port of NuttX to the Opendous Micropendous 3 board. The Micropendous3 is may be populated with an AT90USB646, 647, 1286, or 1287. I have only the AT90USB647 version for testing. This version have very limited memory resources: 64Kb of FLASH and 4Kb of SRAM. STATUS: The basic port was released in NuttX-6.5. This basic port consists only of a "Hello, World!!" example that demonstrates initialization of the OS, creation of a simple task, and serial console output. |
|
PJRC Teensy++ 2.0 AT9USB1286. This is a port of NuttX to the PJRC Teensy++ 2.0 board. This board was developed by PJRC. The Teensy++ 2.0 is based on an Atmel AT90USB1286 MCU. STATUS: The basic port was released in NuttX-6.5. This basic port consists of a "Hello, World!!" example that demonstrates initialization of the OS, creation of a simple task, and serial console output as well as a somewhat simplified NuttShell (NSH) configuration (see the NSH User Guide). An SPI driver and a USB device driver exist for the AT90USB as well as a USB mass storage configureation. However, this configuration is not fully debugged as of the NuttX-6.5 release. |
|
AVR-Specific Issues. The basic AVR port is solid and biggest issue for using AVR is its tiny SRAM memory and its Harvard architecture. Because of the Harvard architecture, constant data that resides to flash is inaccessible using "normal" memory reads and writes (only SRAM data can be accessed "normally"). Special AVR instructions are available for accessing data in FLASH, but these have not been integrated into the normal, general purpose OS. Most NuttX test applications are console-oriented with lots of strings used for printf and debug output. These strings are all stored in SRAM now due to these data accessing issues and even the smallest console-oriented applications can quickly fill a 4-8Kb memory. So, in order for the AVR port to be useful, one of two things would need to be done:
| |
Development Environments: 1) Linux with native Linux GNU toolchain, 2) Cygwin with Cygwin GNU toolchain, or 3) Cygwin with Windows native toolchain. All testing, however, has been performed using the Nuttx DIY toolchain for Linux or Cygwin is provided by the NuttX buildroot package. As a result, that toolchain is recommended. |
|
Atmel AVR32. | |
AV32DEV1. This port uses the www.mcuzone.com AVRDEV1 board based on the Atmel AT32UC3B0256 MCU. This port requires a special GNU avr32 toolchain available from atmel.com website. This is a windows native toolchain and so can be used only under Cygwin on Windows.
STATUS: This port is has completed all basic development, but there is more that needs to be done. All code is complete for the basic NuttX port including header files for all AT32UC3* peripherals. The untested AVR32 code was present in the 5.12 release of NuttX. Since then, the basic RTOS port has solidified: The basic, port (including the verified apps/examples/ostest configuration) was be released in NuttX-5.13. A complete port will include drivers for additional AVR32 UC3 devices -- like SPI and USB --- and will be available in a later release, time permitting. |
|
Freescale M68HCS12. | |
MC9S12NE64. Support for the MC9S12NE64 MCU and two boards are included:
Both use a GNU arm-elf toolchain* under Linux or Cygwin. The NuttX buildroot provides a properly patched GCC 3.4.4 toolchain that is highly optimized for the m9s12x family. STATUS: Coding is complete for the MC9S12NE64 and for the NE64 Badge board. However, testing has not yet begun due to issues with BDMs, Code Warrior, and the paging in the build process. Progress is slow, but I hope to see a fully verified MC9S12NE64 port in the near future. |
|
Intel 8052 Microcontroller. | |
PJRC 87C52 Development Board. This port uses the PJRC 87C52 development system and the SDCC toolchain under Linux or Cygwin. STATUS: This port is complete but not stable with timer interrupts enabled. There seems to be some issue when the stack pointer enters into the indirect IRAM address space during interrupt handling. This architecture has not been built in some time will likely have some compilation problems because of SDCC compiler differences. |
|
Intel 80x86. | |
QEMU/Bifferboard i486. This port uses the QEMU i486 and the native Linux, Cywgin, MinGW the GCC toolchain under Linux or Cygwin. STATUS: The basic port was code-complete in NuttX-5.19 and verifed in NuttX-6.0. The port was verified using the OS and NuttShell (NSH) examples under QEMU. The port is reported to be functional on the Bifferboard as well. This is a great, stable starting point for anyone interest in fleshing out the x86 port! |
|
RGMP. RGMP stands for RTOS and GPOS on Multi-Processor. RGMP is a project for running GPOS and RTOS simultaneously on multi-processor platforms You can port your favorite RTOS to RGMP together with an unmodified Linux to form a hybrid operating system. This makes your application able to use both RTOS and GPOS features. See the RGMP Wiki for further information about RGMP. STATUS: This initial port of NuttX to RGMP was provided in NuttX-6.3. This initial RGP port provides only minimal driver support and does not use the native NuttX interrupt system. This is a great, stable starting point for anyone interest in working with NuttX under RGMP! |
|
MicroChip PIC32 (MIPS). | |
PIC32MX460F512L. A port of NuttX to the PIC32MX460F512L is underway. This port uses the PIC32MX board from PCB Logic Design Co. The board is a very simple -- little more than a carrier for the PIC32 MCU plus voltage regulation, debug interface, and an OTG connector. STATUS: The basic port is code complete and fully verified in NuttX 6.13. Available configurations include the OS test and the NuttShell (NSH - see the NSH User Guide). A more complete port would include support of the USB OTG port on this board. That driver is not yet available as of this writing. |
|
PIC32MX440F512H. This port uses the "Advanced USB Storage Demo Board," Model DB-DP11215, from Sure Electronics. This board features the MicroChip PIC32MX440F512H. See the Sure website for further information about the DB-DP11215 board. (I believe that that the DB-DP11215 may be obsoleted now but replaced with the very similar, DB-DP11212. The DB-DP11212 board differs, I believe, only in its serial port configuration.) STATUS: This NuttX port is code complete and has considerable test testing. The port for this board was completed in NuttX 6.11, but still required a few bug fixes before it will be ready for prime time. The fully verified port first appeared in NuttX 6.13. Available configurations include the OS test and the NuttShell (NSH - see the NSH User Guide). A more complete port would include support of the USB OTG port and of the LCD display on this board. Those drivers are not yet available as of this writing. |
|
PIC32MX795F512L. This port uses the Microchip PIC32 Ethernet Starter Kit (DM320004) with the Multimedia Expansion Board (MEB, DM320005). See the Microchip website for further information. STATUS: This port was started and then shelved for some time... The Starter Kit (even with the MEB) has no serial port. I will have to come up with a different bring-up strategy to work with this board (probably using an external MAX2232 board for UART support). From what I can tell using MPLAB, the NuttX port is running and fully functional on the Starter Kit. The only configuration available as of this writing is the OS test which depends on serial output for full verification. I am considering using a USB serial console to complete the Starter Kit verification. Stay tuned for updates. |
|
Development Environment: These ports uses the LITE version of the PIC32MX toolchain available for download from the MicroChip website. |
|
Renesas/Hitachi SuperH. | |
SH-1 SH7032. This port uses the Hitachi SH-1 Low-Cost Evaluation Board (SH1_LCEVB1), US7032EVB, with a GNU arm-elf toolchain* under Linux or Cygwin. STATUS: This port is available as of release 0.3.18 of NuttX. The port is basically complete and many examples run correctly. However, there are remaining instabilities that make the port un-usable. The nature of these is not understood; the behavior is that certain SH-1 instructions stop working as advertised. This could be a silicon problem, some pipeline issue that is not handled properly by the gcc 3.4.5 toolchain (which has very limit SH-1 support to begin with), or perhaps with the CMON debugger. At any rate, I have exhausted all of the energy that I am willing to put into this cool old processor for the time being. |
|
Renesas M16C/26. | |
Renesas M16C/26 Microncontroller. This port uses the Renesas SKP16C26 Starter kit and the GNU M32C toolchain. The development environment is either Linux or Cygwin under WinXP.
STATUS:
Initial source files released in nuttx-0.4.2.
At this point, the port has not been integrated; the target cannot be built
because the GNU m32c-elf-ld: BFD (GNU Binutils) 2.19 assertion fail /home/Owner/projects/nuttx/buildroot/toolchain_build_m32c/binutils-2.19/bfd/elf32-m32c.c:482
Where the reference line is: /* If the symbol is out of range for a 16-bit address, we must have allocated a plt entry. */ BFD_ASSERT (*plt_offset != (bfd_vma) -1); No workaround is known at this time. This is a show stopper for M16C for the time being. |
|
Zilog Z16F. | |
Zilog z16f Microncontroller. This port use the Zilog z16f2800100zcog development kit and the Zilog ZDS-II Windows command line tools. The development environment is Cygwin under WinXP. STATUS: The initial release of support for the z16f was made available in NuttX version 0.3.7. |
|
Zilog eZ80 Acclaim!. | |
Zilog eZ80Acclaim! Microncontroller. There are two eZ80Acclaim! ports:
Both boards are based on the eZ80F091 part and both use the Zilog ZDS-II Windows command line tools. The development environment is Cygwin under WinXP. STATUS: Integration and testing of NuttX on the ZiLOG ez80f0910200zcog-d is complete. The first integrated version was released in NuttX version 0.4.2 (with important early bugfixes in 0.4.3 and 0.4.4). As of this writing, that port provides basic board support with a serial console, SPI, and eZ80F91 EMAC driver. |
|
Zilog Z8Encore!. | |
Zilog Z8Encore! Microncontroller. This port uses the either:
and the Zilog ZDS-II Windows command line tools. The development environment is Cygwin under WinXP. STATUS: This release has been verified only on the ZiLOG ZDS-II Z8Encore! chip simulation as of nuttx-0.3.9. |
|
Zilog Z80. | |
Z80 Instruction Set Simulator. This port uses the SDCC toolchain under Linux or Cygwin (verified using version 2.6.0). This port has been verified using only a Z80 instruction simulator. That simulator can be found in the NuttX SVN here. STATUS: This port is complete and stable to the extent that it can be tested using an instruction set simulator. |
|
XTRS: TRS-80 Model I/III/4/4P Emulator for Unix. A very similar Z80 port is available for XTRS, the TRS-80 Model I/III/4/4P Emulator for Unix. That port also uses the SDCC toolchain under Linux or Cygwin (verified using version 2.6.0). STATUS: Basically the same as for the Z80 instruction set simulator. This port was contributed by Jacques Pelletier. |
* A highly modified buildroot is available that may be used to build a NuttX-compatible ELF toolchain under Linux or Cygwin. Configurations are available in that buildroot to support ARM, Cortex-M3, avr, m68k, m68hc11, m68hc12, m9s12, blackfin, m32c, h8, and SuperH ports.
Development Environments |
Linux + GNU make + GCC/binutils
|
|
The is the most natural development environment for NuttX. Any version of the GCC/binutils toolchain may be used. There is a highly modified buildroot available for download from the NuttX SourceForge page. This download may be used to build a NuttX-compatible ELF toolchain under Linux or Cygwin. That toolchain will support ARM, m68k, m68hc11, m68hc12, and SuperH ports. The buildroot SVN may be accessed in the NuttX SVN. |
|
Linux + GNU make + SDCC
|
|
Also very usable is the Linux environment using the SDCC compiler. The SDCC compiler provides support for the 8051/2, z80, hc08, and other microcontrollers. The SDCC-based logic is less well exercised and you will likely find some compilation issues if you use parts of NuttX with SDCC that have not been well-tested. |
|
Cygwin + GNU make + GCC/binutils
|
|
This combination works well too. It works just as well as the native Linux environment except that compilation and build times are a little longer. The custom NuttX buildroot referenced above may be build in the Cygwin environment as well. |
|
Cygwin + GNU make + SDCC
|
|
I have never tried this combination, but it would probably work just fine. |
|
Cygwin + GNU make + Windows Native Toolchain
|
|
This is a tougher environment. In this case, the Windows native toolchain is unaware of the Cygwin sandbox and, instead, operates in the native Windows environment. The primary difficulties with this are:
Fortunately, this conversion is done simply using the The NuttX make system works around this limitation by copying the platform specific directories in place. These copied directories make work a little more complex, but otherwise work well.
NOTE: In this environment, it should be possible to use the NTFS
NOTE: dependencies are suppress by setting the make variable Supported Windows Native Toolchains. At present, only the Zilog Z16F, z8Encore, and eZ80Acclaim ports use a non-GCC native Windows toolchain(the Zilog ZDS-II toolchain). Support for Windows native GCC toolchains (CodeSourcery and devkitARM) is currently implemented for the NXP LPC214x, STMicro STR71x, and Luminary LMS6918 ARM ports. (but could easily be extended to any other GCC-based platform with a small effort). |
|
Wine + GNU make + Windows Native Toolchain
|
|
I've never tried this one, but I off the following reported by an ez80 user using the ZiLOG ZDS-II Windows-native toolchain:
|
|
Other Environments?
Windows Native make + Windows Native Toolchain?
|
|
Environment Dependencies. The primary environmental dependency of NuttX are (1) GNU make, (2) bash scripting, and (3) Linux utilities (such as cat, sed, etc.). If you have other platforms that support GNU make or make utilities that are compatible with GNU make, then it is very likely that NuttX would work in that environment as well (with some porting effort). If GNU make is not supported, then some significant modification of the Make system would be required. GNUWin32. For example, with suitable make system changes, it should be possible to use native GNU tools (such as those from GNUWin32) to build NuttX. However, that environment has not been used as of this writing.
NOTE: One of the members on the NuttX forum
reported that they successful built NuttX using such a GNUWin32-based, Windows native environment.
They reported that the only necessary change was to the use the NTFS mklink command to create links
(see |
Memory Footprint |
C5471 (ARM7) The build for this ARM7 target that includes most of the OS features and a broad range of OS tests. The size of this executable as given by the Linux size command is (3/9/07):
text data bss dec hex filename 53272 428 3568 57268 dfb4 nuttx
DM320 (ARM9) This build for the ARM9 target includes a significant subset of OS features, a filesystem, Ethernet driver, full TCP/IP, UDP and (minimal) ICMP stacks (via uIP) and a small network test application: (11/8/07, configuration netconfig, apps/examples/nettest)
text data bss dec hex filename 49472 296 3972 53740 d1ec nuttx
Another build for the ARM9 target includes a minimal OS feature set, Ethernet driver, full TCP/IP and (minimal) ICMP stacks, and a small webserver: (11/20/07, configuration uipconfig, apps/examples/uip)
text data bss dec hex filename 52040 72 4148 56260 dbc4 nuttx
87C52 A reduced functionality OS test for the 8052 target requires only about 18-19Kb:
Stack starts at: 0x21 (sp set to 0x20) with 223 bytes available. Other memory: Name Start End Size Max ---------------- -------- -------- -------- -------- PAGED EXT. RAM 0 256 EXTERNAL RAM 0x0100 0x02fd 510 7936 ROM/EPROM/FLASH 0x2100 0x6e55 19798 24384
Licensing |
NuttX is available under the highly permissive BSD license. Other than some fine print that you agree to respect the copyright you should feel absolutely free to use NuttX in any environment and without any concern for jeopardizing any proprietary software that you may link with it.
Release History |
The current NuttX Change Log is available in SVN here. ChangeLog snapshots associated with the current release are available below.
Change Logs for All NuttX Releases |
|
ChangeLog for the Current Releases |
|
Unreleased Changes |
ChangeLog for the Current Release |
nuttx-6.13 2011-12-26 Gregory Nutt <gnutt@nuttx.org> * arch/arm/src/stm32/stm32f40xxx_dma.c: Add DMA support for the STM32 F4 family (untested on initial check-in) * arch/arm/src/armv7-m/up_fpu.c: Add logic for saving an restoring VFP floating point registers on context switches (but also disable the FPU because CodeSourcery doesn't support hard flowing point!) * arch/arm/src/stm32/chip/stm32_eth.h: Add Ethernet register definitions for the STM32 F4. * arch/arm/srcm/stm32/stm32_eth.c: Adds an Ethernet driver for the STM32 F4. * arch/arm/srcm/stm32/stm32_dac.c and stm32_adc.c: "Skeleton" files for STM32 DAC and ADC drivers. The actual logic will come later. * arch/arm/srcm/stm32/stm32_eth.c: There may be a few more lurking bugs, but the STM32 Ethernet driver appears to be fully functional on the STM3240G-EVAL. * arch/arm/srcm/stm32/stm32_eth.c: Fix an error in clearing abnormal interrupt events. * configs/stm3240g-eval/dhcpd: Add a DCHP daemon configuration for the STM3240G-EVAL board. * configs/stm3240g-eval/nettest: Add a network test configuration for the STM3240G-EVAL board. * arch/arm/srcm/stm32/stm32_rtc.c, stm32f10xxx_rtc.c, and stm32f40xxx_rtc: Broke out separate drivers to handle the very different RTC implementations in the STM32 F1 and F4 family. * arch/arm/srcm/stm32/stm32f10xxx_rtc.c: STM32 F4 RTC is functional (12/14/2011) * net/uip-arp.c: Fix compilation issue with CONFIG_NET_ARP_IPIN * include/nuttx/pwm.h and drivers/pwm.c: Add an interface definition and a "upper half" driver for PWM output. * arch/arm/src/stm32/stm32_pwm.c: Added a PWM "lower half" driver for the STM32. The initial check-in is little more than a framework for the driver. * arch/arm/src/stm32/stm32_usbdev.c: Corrected two CRITICAL errors in the USB device-side driver: (1) Handling of data overrun condition was wrong. When there was no further memory to accept further OUT endpoint data, the driver would hang with infinite interrupts; (2) the logic in setting toggle bits was not correct. However, this driver has functioned for a long time until the particular condition that revealed the bug occurred. My impression is that this latter bugfix also fixes some STM32 USB performance problems. * configs/hymini-stm32v: A configuration for the HY-Mini STM32v board contributed by Laurent Latil. Theses changes also include support for the STM32F103VCT6. * arch/configs/stm3240g-eval/src/up_pwm.c: Add hooks needed to use the new apps/examples/pwm test of the STM32 PWM driver. * drivers/mtd/mp25x.c: Add ability to use different SPI modes and different manufacturers codes. Fix a error in the wait for not busy (submitted by Mohammad Elwakeel. * arch/arm/src/stm32/stm32_can.c. Add a low-level STM32 CAN driver. (Initial check is incomplete). Add loopback support to the driver. * arch/arm/src/stm32/stm32_adc.c. The ADC is now functional. A more complete driver would require DMA support. I have some questions still about the accuracy of the timer-driven sampling. * configs/sure-pic32mx/nsh. The PIC32 port is (finally) functional. Add an NSH configuration for the Sure PIC32MX board. * configs/sure-pic32mx/*/defconfig. Calibrated all PIC32 delay loops. * configs/pcblogic-pic32mx/nsh. Add an NSH configuration for the PCBLogic PIC32 board. * Both PIC32 OS test and NSH configurations have now been verified. apps-6.13 2011-12-06 Gregory Nutt <gnutt@nuttx.org> * apps/examples/dhcpd: May now be built as an NSH built-in application by setting CONFIG_NSH_BUILTIN_APPS. * apps/netutils/dhcpd/dhcpd.c: Fix several problems using host order address where network addresses expected (and vice versa). * apps/examples/nettest: May now be built as an NSH built-in application by setting CONFIG_NSH_BUILTIN_APPS. * apps/examples/nettest: Correct some build issues with the nettest is built for performance evaluation. * apps/examples/adc: Add a very simple test to drive and test an ADC driver. * apps/examples/pwm: Add an NSH PWM command to drive and test a PWM driver. * apps/examples/can: Add an NSH CAN command to drive and test a CAN driver in loopback mode. pascal-1.0 2011-05-15 Gregory Nutt <gnutt@nuttx.org> * nuttx/: The Pascal add-on module now installs and builds under the apps/interpreters directory. This means that the pascal-2.1 module is incompatible with will all releases of NuttX prior to nuttx-6.0 where the apps/ module was introduced. buildroot-1.10 2011-05-06 <gnutt@nuttx.org> * Add patch submitted by Dimiter Georgiev to work around problems in building GDB 6.8 with versions of Cygwin > 1.7. * configs/i486-defconfig-4.3.3 - Builds an i486 cross development toolchain using gcc 4.3.3. Why wouldyou want such a thing? On Linux, of course, such a thing is not needed because you can use the installed GCC to build i486 ELF binaries. But that will not work under Cygwin! The Cygwin toolchain (and probably MinGW), build DOS MZ format executables (i.e., .exe files). That is probably not usable for most NuttX targets. Instead, you should use this i486-elf-gcc to generate true ELF binaries under Cygwin. * Makefile - Alter copy arguments to avoid permissions problems when copying NuttX header files. * toolchain/nxflat/nxflat.mk and Makefile - Fix include paths. * toolchain/gcc/3.3.6 - Added a patch to fixed compilation error on Ubuntu 9.10. * toolchain/nxflat/Makefile - Correct static library link order. * configs/arm920t-defconfig-4.3.3 - Enable support for NXFLAT tools. * toolchain/binutils/2.21 and toolchain/gcc/4.5.2 - Add support for GCC 4.5.2 with binutils 2.21. * configs/arm920t-eabi-defconfig-4.5.2 - Add a configuration to build a GCC 4.5.2 EABI ARM toolchain for the ARM920t.
Unreleased Changes |
nuttx-6.14 2012-xx-xx Gregory Nutt <gnutt@nuttx.org> * tools/Makefile.export, mkexport.sh, and configure.sh: Changes submitted by Mike Smith to support configuration and 'make export' on MAC OS. * arch/arm/src/stm32/stm32_gpio.c: Disabled interrupts while configuring GPIO pins so that we have exclusive access to the GPIO configuration registers. * arch/mips/src/pic32mx/pic32mx_usbdev.c: Add a USB device-side driver for the PIC32MX family. * arch/arm/src/stm32/stm32_gpio.c: Correct an error in some of the GPIO initialization logic. Fix submitted by Mike Smith. * configs/olimex-lpc1766stk/src/up_leds.c: Add new interfaces so that is CONFIG_ARCH_LEDS are not set, the LEDs may be controlled from application logic. * configs/olimex-lpc1766stk/src/up_buttons.c: Add support form the buttons on the Olimex LPC1766-STK board. * Makefile: Added 'apps_clean' and 'apps_distclean' target to simplify managing the state of the application directory while in the NuttX directory * Documentation/NuttXGettingStarted.html: Added a "Getting Started" Guide for NuttX. At present, this is just a stub and it refers to the NuttX top-level README.txt file which is the only, real "Getting Started" Guide that exists at the time being. * arch/arm/src/lpc17xx/lpc17_gpioint.c: Correct an value used as the lower end of an IRQ number range test. * arch/arm/src/lpc17xx/lpc17_gpio.c: Fix a integer flow problem in shift. This error would prevent pins > 15 from being used as interrupt sources. apps-6.14 2012-xx-xx Gregory Nutt <gnutt@nuttx.org> * apps/examples/buttons/main.c: The test needs to up_buttoninit() to properly configure the button interrupt GPIOs. pascal-3.1 2012-xx-xx Gregory Nutt <gnutt@nuttx.org> buildroot-1.11 2012-xx-xx <gnutt@nuttx.org> * configs/avr-defconfig-4.3.3 - Added --enable-long-long as a GCC option. * configs/avr-defconfig-4.5.2 - New configuration. * Config.in and almost all configurations in configs/ - Changed the default nuttx path to $(TOPDIR)/../../nuttx
Bugs, Issues, Things-To-Do |
The current list of NuttX Things-To-Do in SVN here. A snapshot of the To-Do list associated with the current release are available here.
Other Documentation |
User Guide | |
Porting Guide | |
NuttShell (NSH) | |
NXFLAT Binary Format | |
NX Graphics Subsystem | |
Demand Paging | |
NuttX README Files | |
Change Log | |
To-Do List | |
USB Device Driver Tracing |
Trademarks |
NOTE: NuttX is not licensed to use the POSIX trademark. NuttX uses the POSIX standard as a development guideline only.