#
# For a description of the syntax of this configuration file,
# see misc/tools/kconfig-language.txt.
#

if ARCH_ARM
comment "ARM Options"

choice
	prompt "ARM chip selection"
	default ARCH_CHIP_STM32

config ARCH_CHIP_C5471
	bool "TMS320 C5471"
	select ARCH_ARM7TDMI
	select ARCH_HAVE_LOWVECTORS
	---help---
		TI TMS320 C5471, A180, or DA180 (ARM7TDMI)

config ARCH_CHIP_CALYPSO
	bool "Calypso"
	select ARCH_ARM7TDMI
	select ARCH_HAVE_HEAP2
	select ARCH_HAVE_LOWVECTORS
	---help---
		TI Calypso-based cell phones (ARM7TDMI)

config ARCH_CHIP_DM320
	bool "TMS320 DM320"
	select ARCH_ARM926EJS
	select ARCH_HAVE_LOWVECTORS
	select ARCH_HAVE_MMU
	---help---
		TI DMS320 DM320 (ARM926EJS)

config ARCH_CHIP_IMX
	bool "Freescale iMX"
	select ARCH_ARM920T
	select ARCH_HAVE_HEAP2
	select ARCH_HAVE_LOWVECTORS
	select ARCH_HAVE_MMU
	---help---
		Freescale iMX architectures (ARM920T)

config ARCH_CHIP_KINETIS
	bool "Freescale Kinetis"
	select ARCH_CORTEXM4
	select ARCH_HAVE_MPU
	select ARCH_HAVE_FPU
	select ARCH_HAVE_RAMFUNCS
	select ARCH_RAMFUNCS
	---help---
		Freescale Kinetis Architectures (ARM Cortex-M4)

config ARCH_CHIP_KL
	bool "Freescale Kinetis L"
	select ARCH_CORTEXM0
	select ARCH_HAVE_CMNVECTOR
	---help---
		Freescale Kinetis L Architectures (ARM Cortex-M0+)

config ARCH_CHIP_LM
	bool "TI Stellaris"
	select ARCH_HAVE_MPU
	---help---
		TI Stellaris LMS3 and LM4F architecutres (ARM Cortex-M3/4)

config ARCH_CHIP_LPC17XX
	bool "NXP LPC17xx"
	select ARCH_CORTEXM3
	select ARCH_HAVE_CMNVECTOR
	select ARCH_HAVE_MPU
	---help---
		NXP LPC17xx architectures (ARM Cortex-M3)

config ARCH_CHIP_LPC214X
	bool "NXP LPC214x"
	select ARCH_ARM7TDMI
	select ARCH_HAVE_LOWVECTORS
	---help---
		NXP LPC2145x architectures (ARM7TDMI)

config ARCH_CHIP_LPC2378
	bool "NXP LPC2378"
	select ARCH_ARM7TDMI
	select ARCH_HAVE_LOWVECTORS
	---help---
		NXP LPC2145x architectures (ARM7TDMI)

config ARCH_CHIP_LPC31XX
	bool "NXP LPC31XX"
	select ARCH_ARM926EJS
	select ARCH_HAVE_LOWVECTORS
	select ARCH_HAVE_MMU
	---help---
		NPX LPC31XX architectures (ARM926EJS).

config ARCH_CHIP_LPC43XX
	bool "NXP LPC43XX"
	select ARCH_CORTEXM4
	select ARCH_HAVE_CMNVECTOR
	select ARMV7M_CMNVECTOR
	select ARCH_HAVE_MPU
	select ARCH_HAVE_FPU
	---help---
		NPX LPC43XX architectures (ARM Cortex-M4).

config ARCH_CHIP_NUC1XX
	bool "Nuvoton NUC100/120"
	select ARCH_CORTEXM0
	select ARCH_HAVE_CMNVECTOR
	---help---
		NPX LPC43XX architectures (ARM Cortex-M4).

config ARCH_CHIP_SAM34
	bool "Atmel AT91SAM3/SAM4"
	select ARCH_HAVE_MPU
	select ARCH_HAVE_RAMFUNCS
	---help---
		Atmel AT91SAM3 (ARM Cortex-M3) and SAM4 (ARM Cortex-M4) architectures

config ARCH_CHIP_STM32
	bool "STMicro STM32"
	select ARCH_HAVE_CMNVECTOR
	select ARCH_HAVE_MPU
	select ARCH_HAVE_I2CRESET
	---help---
		STMicro STM32 architectures (ARM Cortex-M3/4).

config ARCH_CHIP_STR71X
	bool "STMicro STR71x"
	select ARCH_ARM7TDMI
	select ARCH_HAVE_LOWVECTORS
	---help---
		STMicro STR71x architectures (ARM7TDMI).

endchoice

config ARCH_ARM7TDMI
	bool

config ARCH_ARM926EJS
	bool

config ARCH_ARM920T
	bool

config ARCH_CORTEXM0
	bool
	select ARCH_IRQPRIO

config ARCH_CORTEXM3
	bool
	select ARCH_IRQPRIO
	select ARCH_HAVE_RAMVECTORS

config ARCH_CORTEXM4
	bool
	select ARCH_IRQPRIO
	select ARCH_HAVE_RAMVECTORS

config ARCH_FAMILY
	string
	default "arm"		if ARCH_ARM7TDMI || ARCH_ARM926EJS || ARCH_ARM920T
	default "armv6-m"	if ARCH_CORTEXM0
	default "armv7-m"	if ARCH_CORTEXM3 || ARCH_CORTEXM4

config ARCH_CHIP
	string
	default "c5471"		if ARCH_CHIP_C5471
	default "calypso"	if ARCH_CHIP_CALYPSO
	default "dm320"		if ARCH_CHIP_DM320
	default "imx"		if ARCH_CHIP_IMX
	default "kinetis"	if ARCH_CHIP_KINETIS
	default "kl"		if ARCH_CHIP_KL
	default "lm"		if ARCH_CHIP_LM
	default "lpc17xx"	if ARCH_CHIP_LPC17XX
	default "lpc214x"	if ARCH_CHIP_LPC214X
	default "lpc2378"	if ARCH_CHIP_LPC2378
	default "lpc31xx"	if ARCH_CHIP_LPC31XX
	default "lpc43xx"	if ARCH_CHIP_LPC43XX
	default "nuc1xx"	if ARCH_CHIP_NUC1XX
	default "sam34"		if ARCH_CHIP_SAM34
	default "stm32"		if ARCH_CHIP_STM32
	default "str71x"	if ARCH_CHIP_STR71X

config ARMV7M_USEBASEPRI
	bool "Use BASEPRI Register"
	default n
	depends on ARCH_CORTEXM3 || ARCH_CORTEXM4
	---help---
		Use the BASEPRI register to enable and disable able interrupts.  By
		default, the PRIMASK register is used for this purpose.  This
		usually results in hardfaults that are properly handling by the
		RTOS.  Using the BASEPRI register will avoid these hardfault.
		That is needed primarily for integration with some toolchains.

config ARCH_HAVE_CMNVECTOR
	bool

config ARMV7M_CMNVECTOR
	bool "Use common ARMv7-M vectors"
	default n
	depends on ARCH_HAVE_CMNVECTOR
	---help---
		Some architectures use their own, built-in vector logic.  Some use only
		the common vector logic.  Some can use either their own built-in vector
		logic or the common vector logic.  This applies only to ARMv7-M
		architectures.

config ARCH_HAVE_FPU
	bool
	default n

config ARCH_FPU
	bool "FPU support"
	default y
	depends on ARCH_HAVE_FPU
	---help---
		Build in support for the ARM Cortex-M4 Floating Point Unit (FPU).
		Check your chip specifications first; not all Cortex-M4 chips support the FPU.

config ARCH_HAVE_MPU
	bool
	default n

config ARMV7M_MPU
	bool "MPU support"
	default n
	depends on ARCH_HAVE_MPU
	---help---
		Build in support for the ARM Cortex-M3/4 Memory Protection Unit (MPU).
		Check your chip specifications first; not all Cortex-M3/4 chips support the MPU.

config ARMV7M_MPU_NREGIONS
	int "Number of MPU regions"
	default 8
	depends on ARMV7M_MPU
	---help---
	This is the number of protection regions supported by the MPU.

config ARCH_HAVE_LOWVECTORS
	bool

config ARCH_LOWVECTORS
	bool "Vectors in low memory"
	default n
	depends on ARCH_HAVE_LOWVECTORS
	---help---
		Support ARM vectors in low memory.

config ARCH_HAVE_MMU
	bool

config PGTABLE_VADDR
	hex "Page table virtual address"
	depends on ARCH_HAVE_MMU
	---help---
		Page table virtual address (might be defined in the board.h file).  Not
		applicable to all architectures.

config ARCH_ROMPGTABLE
	bool "ROM page table"
	default n
	depends on ARCH_HAVE_MMU
	---help---
		Support a fixed memory mapping use a (read-only) page table in ROM/FLASH.

config PAGING
	bool "On-demand paging"
	default n
	depends on ARCH_HAVE_MMU && !ARCH_ROMPGTABLE
	---help---
		If set =y in your configation file, this setting will enable the on-demand
		paging feature as described in http://www.nuttx.org/NuttXDemandPaging.html.

config DEBUG_HARDFAULT
	bool "Verbose Hard-Fault Debug"
	default n
	depends on DEBUG && (ARCH_CORTEXM3 || ARCH_CORTEXM4)
	---help---
		Enables verbose debug output when a hard fault is occurs.  This verbose
		output is sometimes helpful when debugging difficult hard fault problems,
		but may be more than you typcially want to see.

if ARCH_CORTEXM0
source arch/arm/src/armv6-m/Kconfig
endif
if ARCH_CORTEXM3 || ARCH_CORTEXM4
source arch/arm/src/armv7-m/Kconfig
endif
if ARCH_ARM7TDMI || ARCH_ARM926EJS
source arch/arm/src/arm/Kconfig
endif
if ARCH_CHIP_C5471
source arch/arm/src/c5471/Kconfig
endif
if ARCH_CHIP_CALYPSO
source arch/arm/src/calypso/Kconfig
endif
if ARCH_CHIP_DM320
source arch/arm/src/dm320/Kconfig
endif
if ARCH_CHIP_IMX
source arch/arm/src/imx/Kconfig
endif
if ARCH_CHIP_KINETIS
source arch/arm/src/kinetis/Kconfig
endif
if ARCH_CHIP_KL
source arch/arm/src/kl/Kconfig
endif
if ARCH_CHIP_LM
source arch/arm/src/lm/Kconfig
endif
if ARCH_CHIP_LPC17XX
source arch/arm/src/lpc17xx/Kconfig
endif
if ARCH_CHIP_LPC214X
source arch/arm/src/lpc214x/Kconfig
endif
if ARCH_CHIP_LPC2378
source arch/arm/src/lpc2378/Kconfig
endif
if ARCH_CHIP_LPC31XX
source arch/arm/src/lpc31xx/Kconfig
endif
if ARCH_CHIP_LPC43XX
source arch/arm/src/lpc43xx/Kconfig
endif
if ARCH_CHIP_NUC1XX
source arch/arm/src/nuc1xx/Kconfig
endif
if ARCH_CHIP_SAM34
source arch/arm/src/sam34/Kconfig
endif
if ARCH_CHIP_STM32
source arch/arm/src/stm32/Kconfig
endif
if ARCH_CHIP_STR71X
source arch/arm/src/str71x/Kconfig
endif

endif