/**************************************************************************** * arch/arm/src/sam34/sam_allocateheap.c * * Copyright (C) 2010, 2013, 2015 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include "mpu.h" #include "up_arch.h" #include "up_internal.h" #include "chip.h" #include "sam_mpuinit.h" #include "sam_periphclks.h" /**************************************************************************** * Private Definitions ****************************************************************************/ /* All SAM's have SRAM0. The SAM3U family also have SRAM1 and possibly * NFCSRAM. NFCSRAM may not be used, however, if NAND support is enabled. * In addition, the SAM3U and SAM4S have external SRAM at CS0 (EXTSRAM0). * Support for external SRAM at CS1-3 is not fully implemented. */ #undef HAVE_SRAM1_REGION /* Assume no internal SRAM1 */ #undef HAVE_NFCSRAM_REGION /* Assume no NFC SRAM */ #undef HAVE_EXTSRAM0_REGION /* Assume no external SRAM at CS0 */ #undef HAVE_EXTSRAM1_REGION /* Assume no external SRAM at CS1 */ #undef HAVE_EXTSRAM2_REGION /* Assume no external SRAM at CS2 */ #undef HAVE_EXTSRAM3_REGION /* Assume no external SRAM at CS3 */ /* Check if external SRAM is supported and, if so, it is is intended * to be used as heap. */ #if !defined(CONFIG_SAM34_EXTSRAM0) || !defined(CONFIG_SAM34_EXTSRAM0HEAP) # undef CONFIG_SAM34_EXTSRAM0SIZE # define CONFIG_SAM34_EXTSRAM0SIZE 0 #endif #if !defined(CONFIG_SAM34_EXTSRAM1) || !defined(CONFIG_SAM34_EXTSRAM1HEAP) # undef CONFIG_SAM34_EXTSRAM1SIZE # define CONFIG_SAM34_EXTSRAM1SIZE 0 #endif #if !defined(CONFIG_SAM34_EXTSRAM2) || !defined(CONFIG_SAM34_EXTSRAM2HEAP) # undef CONFIG_SAM34_EXTSRAM2SIZE # define CONFIG_SAM34_EXTSRAM2SIZE 0 #endif #if !defined(CONFIG_SAM34_EXTSRAM3) || !defined(CONFIG_SAM34_EXTSRAM3HEAP) # undef CONFIG_SAM34_EXTSRAM3SIZE # define CONFIG_SAM34_EXTSRAM3SIZE 0 #endif /* SAM3U, SAM3X, and SAM3A Unique memory configurations */ #if defined(CONFIG_ARCH_CHIP_SAM3U) || defined(CONFIG_ARCH_CHIP_SAM3X) || \ defined(CONFIG_ARCH_CHIP_SAM3A) # ifdef CONFIG_SAM34_NAND # undef SAM34_NFCSRAM_SIZE # define SAM34_NFCSRAM_SIZE 0 # endif # if SAM34_SRAM1_SIZE > 0 # if CONFIG_MM_REGIONS > 1 # define HAVE_SRAM1_REGION 1 # else # warning "CONFIG_MM_REGIONS < 2: SRAM1 not included in HEAP" # endif # endif # if SAM34_NFCSRAM_SIZE > 0 # if CONFIG_MM_REGIONS > 2 # define HAVE_NFCSRAM_REGION # else # warning "CONFIG_MM_REGIONS < 3: NFC SRAM not included in HEAP" # endif # if CONFIG_SAM34_EXTSRAM0SIZE > 0 # if CONFIG_MM_REGIONS > 3 # define HAVE_EXTSRAM0_REGION 1 # else # warning "CONFIG_MM_REGIONS < 4: External SRAM not included in HEAP" # endif # endif # elif CONFIG_SAM34_EXTSRAM0SIZE > 0 # if CONFIG_MM_REGIONS > 2 # define HAVE_EXTSRAM0_REGION 1 # else # warning "CONFIG_MM_REGIONS < 3: External SRAM not included in HEAP" # endif # endif #else /* The SAM4S and SAM4L may have only internal SRAM0 and external SRAM0 */ # if CONFIG_SAM34_EXTSRAM0SIZE > 0 # if CONFIG_MM_REGIONS > 1 # define HAVE_EXTSRAM0_REGION 1 # else # warning "CONFIG_MM_REGIONS < 2: External SRAM not included in HEAP" # endif # endif #endif /* Check common SRAM0 configuration */ #if CONFIG_RAM_END > (SAM_INTSRAM0_BASE+SAM34_SRAM0_SIZE) # error "CONFIG_RAM_END is beyond the end of SRAM0" # undef CONFIG_RAM_END # define CONFIG_RAM_END (SAM_INTSRAM0_BASE+SAM34_SRAM0_SIZE) #elif CONFIG_RAM_END < (SAM_INTSRAM0_BASE+SAM34_SRAM0_SIZE) # warning "CONFIG_RAM_END is before end of SRAM0... not all of SRAM0 used" #endif /**************************************************************************** * Private Data ****************************************************************************/ /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: up_allocate_heap * * Description: * This function will be called to dynamically set aside the heap region. * * For the kernel build (CONFIG_BUILD_PROTECTED=y) with both kernel- and * user-space heaps (CONFIG_MM_KERNEL_HEAP=y), this function provides the * size of the unprotected, user-space heap. * * If a protected kernel-space heap is provided, the kernel heap must be * allocated (and protected) by an analogous up_allocate_kheap(). * * The following memory map is assumed for the flat build: * * .data region. Size determined at link time. * .bss region Size determined at link time. * IDLE thread stack. Size determined by CONFIG_IDLETHREAD_STACKSIZE. * Heap. Extends to the end of SRAM. * * The following memory map is assumed for the kernel build: * * Kernel .data region. Size determined at link time. * Kernel .bss region Size determined at link time. * Kernel IDLE thread stack. Size determined by CONFIG_IDLETHREAD_STACKSIZE. * Padding for alignment * User .data region. Size determined at link time. * User .bss region Size determined at link time. * Kernel heap. Size determined by CONFIG_MM_KERNEL_HEAPSIZE. * User heap. Extends to the end of SRAM. * ****************************************************************************/ void up_allocate_heap(FAR void **heap_start, size_t *heap_size) { #if defined(CONFIG_BUILD_PROTECTED) && defined(CONFIG_MM_KERNEL_HEAP) /* Get the unaligned size and position of the user-space heap. * This heap begins after the user-space .bss section at an offset * of CONFIG_MM_KERNEL_HEAPSIZE (subject to alignment). */ uintptr_t ubase = (uintptr_t)USERSPACE->us_bssend + CONFIG_MM_KERNEL_HEAPSIZE; size_t usize = CONFIG_RAM_END - ubase; int log2; DEBUGASSERT(ubase < (uintptr_t)CONFIG_RAM_END); /* Adjust that size to account for MPU alignment requirements. * NOTE that there is an implicit assumption that the CONFIG_RAM_END * is aligned to the MPU requirement. */ log2 = (int)mpu_log2regionfloor(usize); DEBUGASSERT((CONFIG_RAM_END & ((1 << log2) - 1)) == 0); usize = (1 << log2); ubase = CONFIG_RAM_END - usize; /* Return the user-space heap settings */ board_led_on(LED_HEAPALLOCATE); *heap_start = (FAR void*)ubase; *heap_size = usize; /* Allow user-mode access to the user heap memory */ sam_mpu_uheap((uintptr_t)ubase, usize); #else /* Return the heap settings */ board_led_on(LED_HEAPALLOCATE); *heap_start = (FAR void*)g_idle_topstack; *heap_size = CONFIG_RAM_END - g_idle_topstack; #endif } /**************************************************************************** * Name: up_allocate_kheap * * Description: * For the kernel build (CONFIG_BUILD_PROTECTED=y) with both kernel- and * user-space heaps (CONFIG_MM_KERNEL_HEAP=y), this function allocates * (and protects) the kernel-space heap. * ****************************************************************************/ #if defined(CONFIG_BUILD_PROTECTED) && defined(CONFIG_MM_KERNEL_HEAP) void up_allocate_kheap(FAR void **heap_start, size_t *heap_size) { /* Get the unaligned size and position of the user-space heap. * This heap begins after the user-space .bss section at an offset * of CONFIG_MM_KERNEL_HEAPSIZE (subject to alignment). */ uintptr_t ubase = (uintptr_t)USERSPACE->us_bssend + CONFIG_MM_KERNEL_HEAPSIZE; size_t usize = CONFIG_RAM_END - ubase; int log2; DEBUGASSERT(ubase < (uintptr_t)CONFIG_RAM_END); /* Adjust that size to account for MPU alignment requirements. * NOTE that there is an implicit assumption that the CONFIG_RAM_END * is aligned to the MPU requirement. */ log2 = (int)mpu_log2regionfloor(usize); DEBUGASSERT((CONFIG_RAM_END & ((1 << log2) - 1)) == 0); usize = (1 << log2); ubase = CONFIG_RAM_END - usize; /* Return the kernel heap settings (i.e., the part of the heap region * that was not dedicated to the user heap). */ *heap_start = (FAR void*)USERSPACE->us_bssend; *heap_size = ubase - (uintptr_t)USERSPACE->us_bssend; } #endif /************************************************************************ * Name: up_addregion * * Description: * Memory may be added in non-contiguous chunks. Additional chunks are * added by calling this function. * ************************************************************************/ #if CONFIG_MM_REGIONS > 1 void up_addregion(void) { /* The SAM3U also have SRAM1 and NFCSRAM, We will add these as regions * the first two additional memory regions if we have them. */ #ifdef HAVE_SRAM1_REGION /* Allow user access to the heap memory */ sam_mpu_uheap(SAM_INTSRAM1_BASE, SAM34_SRAM1_SIZE); /* Add the region */ kumm_addregion((FAR void*)SAM_INTSRAM1_BASE, SAM34_SRAM1_SIZE); #endif /* HAVE_SRAM1_REGION */ #ifdef HAVE_NFCSRAM_REGION #if defined(CONFIG_ARCH_CHIP_SAM3X) || defined(CONFIG_ARCH_CHIP_SAM3A) /* In the 3X/3A family I note that clocking must appled to the SMC module * in order for the NFCS SRAM to be functional. I don't recall such an * issue with the 3U. */ sam_smc_enableclk(); #endif /* Allow user access to the heap memory */ sam_mpu_uheap(SAM_NFCSRAM_BASE, SAM34_NFCSRAM_SIZE); /* Add the region */ kumm_addregion((FAR void*)SAM_NFCSRAM_BASE, SAM34_NFCSRAM_SIZE); #endif /* HAVE_NFCSRAM_REGION */ #ifdef HAVE_EXTSRAM0_REGION /* Allow user access to the heap memory */ sam_mpu_uheap(SAM_EXTCS0_BASE, CONFIG_SAM34_EXTSRAM0SIZE); /* Add the region */ kumm_addregion((FAR void*)SAM_EXTCS0_BASE, CONFIG_SAM34_EXTSRAM0SIZE); #endif /* HAVE_EXTSRAM0_REGION */ #ifdef HAVE_EXTSRAM1_REGION /* Allow user access to the heap memory */ sam_mpu_uheap(SAM_EXTCS1_BASE, CONFIG_SAM34_EXTSRAM1SIZE); /* Add the region */ kumm_addregion((FAR void*)SAM_EXTCS1_BASE, CONFIG_SAM34_EXTSRAM1SIZE); #endif /* HAVE_EXTSRAM0_REGION */ #ifdef HAVE_EXTSRAM2_REGION /* Allow user access to the heap memory */ sam_mpu_uheap(SAM_EXTCS2_BASE, CONFIG_SAM34_EXTSRAM2SIZE); /* Add the region */ kumm_addregion((FAR void*)SAM_EXTCS2_BASE, CONFIG_SAM34_EXTSRAM2SIZE); #endif /* HAVE_EXTSRAM0_REGION */ #ifdef HAVE_EXTSRAM3_REGION /* Allow user access to the heap memory */ sam_mpu_uheap(SAM_EXTCS3_BASE, CONFIG_SAM34_EXTSRAM3SIZE); /* Add the region */ kumm_addregion((FAR void*)SAM_EXTCS3_BASE, CONFIG_SAM34_EXTSRAM3SIZE); #endif /* HAVE_EXTSRAM0_REGION */ } #endif /* CONFIG_MM_REGIONS > 1 */