/************************************************************************************ * arch/arm/src/sam3u/sam3u_internal.h * * Copyright (C) 2009-2010 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ************************************************************************************/ #ifndef __ARCH_ARM_SRC_SAM3U_SAM3U_INTERNAL_H #define __ARCH_ARM_SRC_SAM3U_SAM3U_INTERNAL_H /************************************************************************************ * Included Files ************************************************************************************/ #include #include #include #include #include #include "up_internal.h" #include "chip.h" /************************************************************************************ * Definitions ************************************************************************************/ /* Configuration ********************************************************************/ #if defined(CONFIG_GPIOA_IRQ) || defined(CONFIG_GPIOB_IRQ) || defined(CONFIG_GPIOC_IRQ) # define CONFIG_GPIO_IRQ 1 #else # undef CONFIG_GPIO_IRQ #endif /* Bit-encoded input to sam3u_configgpio() ******************************************/ /* 16-bit Encoding: * MMCC CII. VPPB BBBB */ /* Input/Output mode: * * MM.. .... .... .... */ #define GPIO_MODE_SHIFT (14) /* Bits 14-15: GPIO mode */ #define GPIO_MODE_MASK (3 << GPIO_MODE_SHIFT) # define GPIO_INPUT (0 << GPIO_MODE_SHIFT) /* Input */ # define GPIO_OUTPUT (1 << GPIO_MODE_SHIFT) /* Output */ # define GPIO_PERIPHA (2 << GPIO_MODE_SHIFT) /* Controlled by periph A signal */ # define GPIO_PERIPHB (3 << GPIO_MODE_SHIFT) /* Controlled by periph B signal */ /* These bits set the configuration of the pin: * ..CC C... .... .... */ #define GPIO_CFG_SHIFT (11) /* Bits 11-13: GPIO configuration bits */ #define GPIO_CFG_MASK (3 << GPIO_CFG_SHIFT) # define GPIO_CFG_DEFAULT (0 << GPIO_CFG_SHIFT) /* Default, no attribute */ # define GPIO_CFG_PULLUP (1 << GPIO_CFG_SHIFT) /* Bit 11: Internal pull-up */ # define GPIO_CFG_DEGLITCH (2 << GPIO_CFG_SHIFT) /* Bit 12: Internal glitch filter */ # define GPIO_CFG_OPENDRAIN (4 << GPIO_CFG_SHIFT) /* Bit 13: Open drain */ /* Additional interrupt modes: * .... .II. .... .... */ #define GPIO_INT_SHIFT (9) /* Bits 9-10: GPIO configuration bits */ #define GPIO_INT_MASK (3 << GPIO_INT_SHIFT) # define GPIO_INT_LEVEL (1 << 10) /* Bit 10: Level detection interrupt */ # define GPIO_INT_EDGE (0) /* (vs. Edge detection interrupt) */ # define GPIO_INT_HIGHLEVEL (1 << 9) /* Bit 9: High level detection interrupt */ # define GPIO_INT_LOWLEVEL (0) /* (vs. Low level detection interrupt) */ # define GPIO_INT_RISING (1 << 9) /* Bit 9: Rising edge detection interrupt */ # define GPIO_INT_FALLING (0) /* (vs. Falling edge detection interrupt) */ /* If the pin is an GPIO output, then this identifies the initial output value: * .... .... V... .... */ #define GPIO_OUTPUT_SET (1 << 7) /* Bit 7: Inital value of output */ #define GPIO_OUTPUT_CLEAR (0) /* This identifies the GPIO port: * .... .... .PP. .... */ #define GPIO_PORT_SHIFT (5) /* Bit 5-6: Port number */ #define GPIO_PORT_MASK (3 << GPIO_PORT_SHIFT) # define GPIO_PORT_PIOA (0 << GPIO_PORT_SHIFT) # define GPIO_PORT_PIOB (1 << GPIO_PORT_SHIFT) # define GPIO_PORT_PIOC (2 << GPIO_PORT_SHIFT) /* This identifies the bit in the port: * .... .... ...B BBBB */ #define GPIO_PIN_SHIFT 0 /* Bits 0-3: GPIO number: 0-15 */ #define GPIO_PIN_MASK (15 << GPIO_PIN_SHIFT) #define GPIO_PIN0 (0 << GPIO_PIN_SHIFT) #define GPIO_PIN1 (1 << GPIO_PIN_SHIFT) #define GPIO_PIN2 (2 << GPIO_PIN_SHIFT) #define GPIO_PIN3 (3 << GPIO_PIN_SHIFT) #define GPIO_PIN4 (4 << GPIO_PIN_SHIFT) #define GPIO_PIN5 (5 << GPIO_PIN_SHIFT) #define GPIO_PIN6 (6 << GPIO_PIN_SHIFT) #define GPIO_PIN7 (7 << GPIO_PIN_SHIFT) #define GPIO_PIN8 (8 << GPIO_PIN_SHIFT) #define GPIO_PIN9 (9 << GPIO_PIN_SHIFT) #define GPIO_PIN10 (10 << GPIO_PIN_SHIFT) #define GPIO_PIN11 (11 << GPIO_PIN_SHIFT) #define GPIO_PIN12 (12 << GPIO_PIN_SHIFT) #define GPIO_PIN13 (13 << GPIO_PIN_SHIFT) #define GPIO_PIN14 (14 << GPIO_PIN_SHIFT) #define GPIO_PIN15 (15 << GPIO_PIN_SHIFT) #define GPIO_PIN16 (16 << GPIO_PIN_SHIFT) #define GPIO_PIN17 (17 << GPIO_PIN_SHIFT) #define GPIO_PIN18 (18 << GPIO_PIN_SHIFT) #define GPIO_PIN19 (19 << GPIO_PIN_SHIFT) #define GPIO_PIN20 (20 << GPIO_PIN_SHIFT) #define GPIO_PIN21 (21 << GPIO_PIN_SHIFT) #define GPIO_PIN22 (22 << GPIO_PIN_SHIFT) #define GPIO_PIN23 (23 << GPIO_PIN_SHIFT) #define GPIO_PIN24 (24 << GPIO_PIN_SHIFT) #define GPIO_PIN25 (25 << GPIO_PIN_SHIFT) #define GPIO_PIN26 (26 << GPIO_PIN_SHIFT) #define GPIO_PIN27 (27 << GPIO_PIN_SHIFT) #define GPIO_PIN28 (28 << GPIO_PIN_SHIFT) #define GPIO_PIN29 (29 << GPIO_PIN_SHIFT) #define GPIO_PIN30 (30 << GPIO_PIN_SHIFT) #define GPIO_PIN31 (31 << GPIO_PIN_SHIFT) /* GPIO pin definitions *************************************************************/ #define GPIO_ADC0_AD0 (GPIO_INPUT|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN21) #define GPIO_ADC0_AD1 (GPIO_INPUT|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN30) #define GPIO_ADC0_AD2 (GPIO_INPUT|GPIO_CFG_DEFAULT|GPIO_PORT_PIOB|GPIO_PIN3) #define GPIO_ADC0_AD3 (GPIO_INPUT|GPIO_CFG_DEFAULT|GPIO_PORT_PIOB|GPIO_PIN4) #define GPIO_ADC0_AD4 (GPIO_INPUT|GPIO_CFG_DEFAULT|GPIO_PORT_PIOC|GPIO_PIN15) #define GPIO_ADC0_AD5 (GPIO_INPUT|GPIO_CFG_DEFAULT|GPIO_PORT_PIOC|GPIO_PIN16) #define GPIO_ADC0_AD6 (GPIO_INPUT|GPIO_CFG_DEFAULT|GPIO_PORT_PIOC|GPIO_PIN17) #define GPIO_ADC0_AD7 (GPIO_INPUT|GPIO_CFG_DEFAULT|GPIO_PORT_PIOC|GPIO_PIN18) #define GPIO_CAN_XCVR_RS (GPIO_OUTPUT|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_OUTPUT_SET|GPIO_PIN23) #define GPIO_CAN1_XCVR_TXD (GPIO_PERIPHA|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN27) #define GPIO_CAN1_XCVR_RXD (GPIO_PERIPHA|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN26) #define GPIO_CAN2_XCVR_TXD (GPIO_PERIPHA|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN29) #define GPIO_CAN2_XCVR_RXD (GPIO_PERIPHA|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN28) #define GPIO_SMC_D0 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|{GPIO_PIN9) /* Check! */ #define GPIO_SMC_D1 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|{GPIO_PIN10) /* Check! */ #define GPIO_SMC_D2 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|{GPIO_PIN11) /* Check! */ #define GPIO_SMC_D3 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|{GPIO_PIN12) /* Check! */ #define GPIO_SMC_D4 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|{GPIO_PIN13) /* Check! */ #define GPIO_SMC_D5 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|{GPIO_PIN14) /* Check! */ #define GPIO_SMC_D6 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|{GPIO_PIN15) /* Check! */ #define GPIO_SMC_D7 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|{GPIO_PIN16) /* Check! */ #define GPIO_SMC_D8 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|{GPIO_PIN25) /* Check! */ #define GPIO_SMC_D9 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|{GPIO_PIN26) /* Check! */ #define GPIO_SMC_D10 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|{GPIO_PIN27) /* Check! */ #define GPIO_SMC_D11 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|{GPIO_PIN28) /* Check! */ #define GPIO_SMC_D12 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|{GPIO_PIN29) /* Check! */ #define GPIO_SMC_D13 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|{GPIO_PIN30) /* Check! */ #define GPIO_SMC_D14 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|{GPIO_PIN31) /* Check! */ #define GPIO_SMC_D15 (GPIO_PERIPHB|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN6) /* Check! */ #define GPIO_SMC_NCS0 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN20) #define GPIO_SMC_NRD (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN19) #define GPIO_SMC_NWE (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN23) #define GPIO_SMC_PSRAM_A0 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOC|{GPIO_PIN0) /* Check! */ #define GPIO_SMC_PSRAM_A1 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOC|{GPIO_PIN1) /* Check! */ #define GPIO_SMC_PSRAM_A2 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOC|{GPIO_PIN2) /* Check! */ #define GPIO_SMC_PSRAM_A3 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOC|{GPIO_PIN3) /* Check! */ #define GPIO_SMC_PSRAM_A4 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOC|{GPIO_PIN4) /* Check! */ #define GPIO_SMC_PSRAM_A5 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOC|{GPIO_PIN5) /* Check! */ #define GPIO_SMC_PSRAM_A6 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOC|{GPIO_PIN6) /* Check! */ #define GPIO_SMC_PSRAM_A7 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOC|{GPIO_PIN7) /* Check! */ #define GPIO_SMC_PSRAM_A8 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOC|{GPIO_PIN8) /* Check! */ #define GPIO_SMC_PSRAM_A9 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOC|{GPIO_PIN9) /* Check! */ #define GPIO_SMC_PSRAM_A10 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOC|{GPIO_PIN10) /* Check! */ #define GPIO_SMC_PSRAM_A11 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOC|{GPIO_PIN11) /* Check! */ #define GPIO_SMC_PSRAM_A12 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOC|{GPIO_PIN24) /* Check! */ #define GPIO_SMC_PSRAM_A13 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOC|{GPIO_PIN25) /* Check! */ #define GPIO_SMC_PSRAM_A14 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOC|{GPIO_PIN26) /* Check! */ #define GPIO_SMC_PSRAM_A15 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOC|{GPIO_PIN27) /* Check! */ #define GPIO_SMC_PSRAM_A16 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOC|{GPIO_PIN27) /* Check! */ #define GPIO_SMC_PSRAM_A17 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOC|{GPIO_PIN28) /* Check! */ #define GPIO_SMC_PSRAM_A18 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOC|{GPIO_PIN29) /* Check! */ #define GPIO_SMC_PSRAM_NBS0 (GPIO_PERIPHB|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN7) /* Check! */ #define GPIO_SMC_PSRAM_NBS1 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOC|GPIO_PIN15) #define GPIO_SMC_A1 (GPIO_PERIPHB|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN8) #define GPIO_SMC_NCS2 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOC|GPIO_PIN16) #define GPIO_SMC_LCD_RS (GPIO_PERIPHB|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN8) #define GPIO_MCI_DAT0 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOA|GPIO_PIN5) #define GPIO_MCI_DAT1 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOA|GPIO_PIN6) #define GPIO_MCI_DAT2 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOA|GPIO_PIN7) #define GPIO_MCI_DAT3 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOA|GPIO_PIN8) #define GPIO_MCI_DAT4 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN28) #define GPIO_MCI_DAT5 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN29) #define GPIO_MCI_DAT6 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN30) #define GPIO_MCI_DAT7 (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOB|GPIO_PIN31) #define GPIO_MCI_CK (GPIO_PERIPHA|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN3) #define GPIO_MCI_DA (GPIO_PERIPHA|GPIO_CFG_PULLUP|GPIO_PORT_PIOA|GPIO_PIN4) #define GPIO_MCI_DAT0IN (GPIO_INPUT|GPIO_CFG_PULLUP|GPIO_PORT_PIOA|GPIO_PIN5) #define GPIO_PWMC_PWMH0 (GPIO_PERIPHA|GPIO_CFG_DEFAULT|GPIO_PORT_PIOB|GPIO_PIN0) #define GPIO_PWMC_PWML0 (GPIO_PERIPHB|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN7) #define GPIO_PWMC_PWMH1 (GPIO_PERIPHA|GPIO_CFG_DEFAULT|GPIO_PORT_PIOB|GPIO_PIN1) #define GPIO_PWMC_PWML1 (GPIO_PERIPHB|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN8) #define GPIO_PWMC_PWMH2 (GPIO_PERIPHA|GPIO_CFG_DEFAULT|GPIO_PORT_PIOB|GPIO_PIN2) #define GPIO_PWMC_PWML2 (GPIO_PERIPHB|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN9) #define GPIO_SPI0_MISO (GPIO_PERIPHA|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN13) #define GPIO_SPI0_MOSI (GPIO_PERIPHA|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN14) #define GPIO_SPI0_SPCK (GPIO_PERIPHA|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN15) //#define GPIO_SPI0_NPCS2_PC14 (GPIO_PERIPHB|GPIO_CFG_DEFAULT|GPIO_PORT_PIOC|GPIO_PIN14) #define GPIO_SPI0_NPCS2_PC14 (GPIO_OUTPUT|GPIO_CFG_PULLUP|GPIO_PORT_PIOC|GPIO_OUTPUT_CLEAR|GPIO_PIN14) #define GPIO_SSC_TD (GPIO_PERIPHA|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN26) #define GPIO_SSC_TK (GPIO_PERIPHA|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN28) #define GPIO_SSC_TF (GPIO_PERIPHA|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN30) #define GPIO_PCK0 (GPIO_PERIPHB|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN21) #define GPIO_TWI_TWD0 (GPIO_PERIPHA|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN9) #define GPIO_TWI_TWCK0 (GPIO_PERIPHA|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN10) #define GPIO_TWI_TWD1 (GPIO_PERIPHA|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN24) #define GPIO_TWI_TWCK1 (GPIO_PERIPHA|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN25) #define GPIO_UART_TXD (GPIO_PERIPHA|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN12) #define GPIO_UART_RXD (GPIO_PERIPHA|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN11) #define GPIO_USART0_CTS (GPIO_PERIPHA|GPIO_CFG_DEFAULT|GPIO_PORT_PIOB|GPIO_PIN8) #define GPIO_USART0_DCD (GPIO_PERIPHB|GPIO_CFG_DEFAULT|GPIO_PORT_PIOB|GPIO_PIN11) #define GPIO_USART0_DSR (GPIO_PERIPHB|GPIO_CFG_DEFAULT|GPIO_PORT_PIOB|GPIO_PIN10) #define GPIO_USART0_DTR (GPIO_PERIPHB|GPIO_CFG_DEFAULT|GPIO_PORT_PIOB|GPIO_PIN9) #define GPIO_USART0_RI (GPIO_PERIPHB|GPIO_CFG_DEFAULT|GPIO_PORT_PIOB|GPIO_PIN12) #define GPIO_USART0_RTS (GPIO_PERIPHA|GPIO_CFG_DEFAULT|GPIO_PORT_PIOB|GPIO_PIN7) #define GPIO_USART0_RXD (GPIO_PERIPHA|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN19) #define GPIO_USART0_SCK (GPIO_PERIPHA|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN17) #define GPIO_USART0_TXD (GPIO_PERIPHA|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN18) #define GPIO_USART1_CTS (GPIO_PERIPHB|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN23) #define GPIO_USART1_RTS (GPIO_PERIPHB|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN22) #define GPIO_USART1_RXD (GPIO_PERIPHA|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN21) #define GPIO_USART1_SCK (GPIO_PERIPHB|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN24) #define GPIO_USART1_TXD (GPIO_PERIPHA|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN20) #define GPIO_USART2_CTS (GPIO_PERIPHB|GPIO_CFG_DEFAULT|GPIO_PORT_PIOB|GPIO_PIN22) #define GPIO_USART2_RTS (GPIO_PERIPHB|GPIO_CFG_DEFAULT|GPIO_PORT_PIOB|GPIO_PIN21) #define GPIO_USART2_RXD (GPIO_PERIPHA|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN23) #define GPIO_USART2_SCK (GPIO_PERIPHB|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN25) #define GPIO_USART2_TXD (GPIO_PERIPHA|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN22) #define GPIO_USART3_CTS (GPIO_PERIPHB|GPIO_CFG_DEFAULT|GPIO_PORT_PIOC|GPIO_PIN10) #define GPIO_USART3_RTS (GPIO_PERIPHB|GPIO_CFG_DEFAULT|GPIO_PORT_PIOC|GPIO_PIN11) #define GPIO_USART3_RXD (GPIO_PERIPHB|GPIO_CFG_DEFAULT|GPIO_PORT_PIOC|GPIO_PIN13) #define GPIO_USART3_SCK (GPIO_PERIPHA|GPIO_CFG_DEFAULT|GPIO_PORT_PIOC|GPIO_PIN19) #define GPIO_USART3_TXD (GPIO_PERIPHB|GPIO_CFG_DEFAULT|GPIO_PORT_PIOC|GPIO_PIN12) #define GPIO_USB_VBUS (GPIO_INPUT|GPIO_CFG_DEFAULT|GPIO_PORT_PIOA|GPIO_PIN0) /* DMA ******************************************************************************/ /* Flags used to characterize the desired DMA channel. The naming convention is that * one side is the peripheral and the other is memory (however, the interface could still * be used if, for example, both sides were memory although the naming would be awkward) */ /* Unchange-able properties of the channel */ #define DMACH_FLAG_FLOWCONTROL (1 << 0) /* Bit 0: Channel supports flow control */ #define DMACH_FLAG_FIFOSIZE_SHIFT (1) /* Bit 1: Size of DMA FIFO */ #define DMACH_FLAG_FIFOSIZE_MASK (1 << DMACH_FLAG_FIFOSIZE_SHIFT) # define DMACH_FLAG_FIFO_8BYTES (0 << DMACH_FLAG_FIFOSIZE_SHIFT) /* 8 bytes */ # define DMACH_FLAG_FIFO_32BYTES (1 << DMACH_FLAG_FIFOSIZE_SHIFT) /* 32 bytes */ /* Configurable properties of the channel */ #define DMACH_FLAG_BURST_LARGEST 0 /* Largest length AHB burst */ #define DMACH_FLAG_BURST_HALF 1 /* Half FIFO size */ #define DMACH_FLAG_BURST_SINGLE 2 /* Single AHB access */ #define DMACH_FLAG_FIFOCFG_SHIFT (2) /* Bits 2-3: FIFO configuration */ #define DMACH_FLAG_FIFOCFG_MASK (3 << DMACH_FLAG_FIFOCFG_SHIFT) # define DMACH_FLAG_FIFOCFG_LARGEST (DMACH_FLAG_BURST_LARGEST << DMACH_FLAG_FIFOCFG_SHIFT # define DMACH_FLAG_FIFOCFG_HALF (DMACH_FLAG_BURST_HALF << DMACH_FLAG_FIFOCFG_SHIFT) # define DMACH_FLAG_FIFOCFG_SINGLE (DMACH_FLAG_BURST_SINGLE << DMACH_FLAG_FIFOCFG_SHIFT) /* Peripheral endpoint characteristics */ #define DMACH_FLAG_PERIPHPID_SHIFT (4) /* Bits 4-7: Peripheral PID */ #define DMACH_FLAG_PERIPHPID_MASK (15 << DMACH_FLAG_PERIPHPID_SHIFT) #define DMACH_FLAG_PERIPHH2SEL (1 << 8) /* Bits 8: HW handshaking */ #define DMACH_FLAG_PERIPHWIDTH_SHIFT (9) /* Bits 9-10: Peripheral width */ #define DMACH_FLAG_PERIPHWIDTH_MASK (3 << DMACH_FLAG_PERIPHWIDTH_SHIFT) # define DMACH_FLAG_PERIPHWIDTH_8BITS (0 << DMACH_FLAG_PERIPHWIDTH_SHIFT) /* 8 bits */ # define DMACH_FLAG_PERIPHWIDTH_16BITS (1 << DMACH_FLAG_PERIPHWIDTH_SHIFT) /* 16 bits */ # define DMACH_FLAG_PERIPHWIDTH_32BITS (2 << DMACH_FLAG_PERIPHWIDTH_SHIFT) /* 32 bits */ #define DMACH_FLAG_PERIPHINCREMENT (1 << 11) /* Bit 11: Autoincrement peripheral address */ #define DMACH_FLAG_PERIPHLLIMODE (1 << 12) /* Bit 12: Use link list descriptors */ /* Memory endpoint characteristics */ #define DMACH_FLAG_MEMPID_SHIFT (13) /* Bits 13-16: Memory PID */ #define DMACH_FLAG_MEMPID_MASK (15 << DMACH_FLAG_PERIPHPID_SHIFT) #define DMACH_FLAG_MEMH2SEL (1 << 17) /* Bits 17: HW handshaking */ #define DMACH_FLAG_MEMWIDTH_SHIFT (18) /* Bits 18-19: Memory width */ #define DMACH_FLAG_MEMWIDTH_MASK (3 << DMACH_FLAG_MEMWIDTH_SHIFT) # define DMACH_FLAG_MEMWIDTH_8BITS (0 << DMACH_FLAG_MEMWIDTH_SHIFT) /* 8 bits */ # define DMACH_FLAG_MEMWIDTH_16BITS (1 << DMACH_FLAG_MEMWIDTH_SHIFT) /* 16 bits */ # define DMACH_FLAG_MEMWIDTH_32BITS (2 << DMACH_FLAG_MEMWIDTH_SHIFT) /* 32 bits */ #define DMACH_FLAG_MEMINCREMENT (1 << 20) /* Bit 20: Autoincrement memory address */ #define DMACH_FLAG_MEMLLIMODE (1 << 21) /* Bit 21: Use link list descriptors */ /************************************************************************************ * Public Types ************************************************************************************/ typedef FAR void *DMA_HANDLE; typedef void (*dma_callback_t)(DMA_HANDLE handle, uint8_t isr, void *arg); /* The following is used for sampling DMA registers when CONFIG DEBUG_DMA is selected */ #ifdef CONFIG_DEBUG_DMA struct sam3u_dmaregs_s { /* Global Registers */ uint32_t gcfg; /* DMAC Global Configuration Register */ uint32_t en; /* DMAC Enable Register */ uint32_t sreq; /* DMAC Software Single Request Register */ uint32_t creq; /* DMAC Software Chunk Transfer Request Register */ uint32_t last; /* DMAC Software Last Transfer Flag Register */ uint32_t ebcimr; /* DMAC Error Mask */ uint32_t ebcisr; /* DMAC Error Status */ uint32_t chsr; /* DMAC Channel Handler Status Register */ /* Channel Registers */ uint32_t saddr; /* DMAC Channel Source Address Register */ uint32_t daddr; /* DMAC Channel Destination Address Register */ uint32_t dscr; /* DMAC Channel Descriptor Address Register */ uint32_t ctrla; /* DMAC Channel Control A Register */ uint32_t ctrlb; /* DMAC Channel Control B Register */ uint32_t cfg; /* DMAC Channel Configuration Register */ }; #endif /************************************************************************************ * Inline Functions ************************************************************************************/ #ifndef __ASSEMBLY__ /************************************************************************************ * Public Data ************************************************************************************/ #undef EXTERN #if defined(__cplusplus) #define EXTERN extern "C" extern "C" { #else #define EXTERN extern #endif /************************************************************************************ * Public Function Prototypes ************************************************************************************/ /************************************************************************************ * Name: sam3u_clockconfig * * Description: * Called to initialize the SAM3U. This does whatever setup is needed to put the * SoC in a usable state. This includes the initialization of clocking using the * settings in board.h. (After power-on reset, the sam3u is initiallyrunning on * a 4MHz internal RC clock). This function also performs other low-level chip * initialization of the chip including EFC, master clock, IRQ and watchdog * configuration. * ************************************************************************************/ EXTERN void sam3u_clockconfig(void); /************************************************************************************ * Name: sam3u_lowsetup * * Description: * Called at the very beginning of _start. Performs low level initialization * including setup of the console UART. This UART done early so that the serial * console is available for debugging very early in the boot sequence. * ************************************************************************************/ EXTERN void sam3u_lowsetup(void); /************************************************************************************ * Name: sam3u_gpioirqinitialize * * Description: * Initialize logic to support a second level of interrupt decoding for GPIO pins. * ************************************************************************************/ #ifdef CONFIG_GPIO_IRQ EXTERN void sam3u_gpioirqinitialize(void); #else # define sam3u_gpioirqinitialize() #endif /************************************************************************************ * Name: sam3u_configgpio * * Description: * Configure a GPIO pin based on bit-encoded description of the pin. * ************************************************************************************/ EXTERN int sam3u_configgpio(uint16_t cfgset); /************************************************************************************ * Name: sam3u_gpiowrite * * Description: * Write one or zero to the selected GPIO pin * ************************************************************************************/ EXTERN void sam3u_gpiowrite(uint16_t pinset, bool value); /************************************************************************************ * Name: sam3u_gpioread * * Description: * Read one or zero from the selected GPIO pin * ************************************************************************************/ EXTERN bool sam3u_gpioread(uint16_t pinset); /************************************************************************************ * Name: sam3u_gpioirq * * Description: * Configure an interrupt for the specified GPIO pin. * ************************************************************************************/ #ifdef CONFIG_GPIO_IRQ EXTERN void sam3u_gpioirq(uint16_t pinset); #else # define sam3u_gpioirq(pinset) #endif /************************************************************************************ * Name: sam3u_gpioirqenable * * Description: * Enable the interrupt for specified GPIO IRQ * ************************************************************************************/ #ifdef CONFIG_GPIO_IRQ EXTERN void sam3u_gpioirqenable(int irq); #else # define sam3u_gpioirqenable(irq) #endif /************************************************************************************ * Name: sam3u_gpioirqdisable * * Description: * Disable the interrupt for specified GPIO IRQ * ************************************************************************************/ #ifdef CONFIG_GPIO_IRQ EXTERN void sam3u_gpioirqdisable(int irq); #else # define sam3u_gpioirqdisable(irq) #endif /**************************************************************************** * Name: sam3u_dmachannel * * Description: * Allocate a DMA channel. This function sets aside a DMA channel with * the required FIFO size and flow control capabilities (determined by * dma_flags) then gives the caller exclusive access to the DMA channel. * * The naming convention in all of the DMA interfaces is that one side is * the 'peripheral' and the other is 'memory'. Howerver, the interface * could still be used if, for example, both sides were memory although * the naming would be awkward. * * Returned Value: * If a DMA channel if the required FIFO size is available, this function * returns a non-NULL, void* DMA channel handle. NULL is returned on any * failure. * ****************************************************************************/ EXTERN DMA_HANDLE sam3u_dmachannel(uint32_t dmach_flags); /**************************************************************************** * Name: sam3u_dmafree * * Description: * Release a DMA channel. NOTE: The 'handle' used in this argument must * NEVER be used again until sam3u_dmachannel() is called again to re-gain * a valid handle. * * Returned Value: * None * ****************************************************************************/ EXTERN void sam3u_dmafree(DMA_HANDLE handle); /**************************************************************************** * Name: sam3u_dmatxsetup * * Description: * Configure DMA for transmit (memory to periphal). * ****************************************************************************/ EXTERN void sam3u_dmatxsetup(DMA_HANDLE handle, uint32_t paddr, uint32_t maddr, size_t nbytes); /**************************************************************************** * Name: sam3u_dmarxsetup * * Description: * Configure DMA for receive (peripheral to memory). * ****************************************************************************/ EXTERN void sam3u_dmarxsetup(DMA_HANDLE handle, uint32_t paddr, uint32_t maddr, size_t nbytes); /**************************************************************************** * Name: sam3u_dmastart * * Description: * Start the DMA transfer * ****************************************************************************/ EXTERN void sam3u_dmastart(DMA_HANDLE handle, dma_callback_t callback, void *arg, bool half); /**************************************************************************** * Name: sam3u_dmastop * * Description: * Cancel the DMA. After sam3u_dmastop() is called, the DMA channel is * reset and sam3u_dmasetup() must be called before sam3u_dmastart() can be * called again * ****************************************************************************/ EXTERN void sam3u_dmastop(DMA_HANDLE handle); /**************************************************************************** * Name: sam3u_dmasample * * Description: * Sample DMA register contents * ****************************************************************************/ #ifdef CONFIG_DEBUG_DMA EXTERN void sam3u_dmasample(DMA_HANDLE handle, struct sam3u_dmaregs_s *regs); #else # define sam3u_dmasample(handle,regs) #endif /**************************************************************************** * Name: sam3u_dmadump * * Description: * Dump previously sampled DMA register contents * ****************************************************************************/ #ifdef CONFIG_DEBUG_DMA EXTERN void sam3u_dmadump(DMA_HANDLE handle, const struct sam3u_dmaregs_s *regs, const char *msg); #else # define sam3u_dmadump(handle,regs,msg) #endif #undef EXTERN #if defined(__cplusplus) } #endif #endif /* __ASSEMBLY__ */ #endif /* __ARCH_ARM_SRC_SAM3U_SAM3U_INTERNAL_H */