/************************************************************************************ * arch/arm/src/stm32/chip/stm32f40xxx_memorymap.h * * Copyright (C) 2011-2012 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ************************************************************************************/ #ifndef __ARCH_ARM_SRC_STM32_CHIP_STM32F40XXX_MEMORYMAP_H #define __ARCH_ARM_SRC_STM32_CHIP_STM32F40XXX_MEMORYMAP_H /************************************************************************************ * Pre-processor Definitions ************************************************************************************/ /* STM32F40XXX Address Blocks *******************************************************/ #define STM32_CODE_BASE 0x00000000 /* 0x00000000-0x1fffffff: 512Mb code block */ #define STM32_SRAM_BASE 0x20000000 /* 0x20000000-0x3fffffff: 512Mb sram block */ #define STM32_PERIPH_BASE 0x40000000 /* 0x40000000-0x5fffffff: 512Mb peripheral block */ #define STM32_FSMC_BASE12 0x60000000 /* 0x60000000-0x7fffffff: 512Mb FSMC bank1&2 block */ # define STM32_FSMC_BANK1 0x60000000 /* 0x60000000-0x6fffffff: 256Mb NOR/SRAM */ # define STM32_FSMC_BANK2 0x70000000 /* 0x70000000-0x7fffffff: 256Mb NAND FLASH */ #define STM32_FSMC_BASE34 0x80000000 /* 0x80000000-0x8fffffff: 512Mb FSMC bank3&4 block */ # define STM32_FSMC_BANK3 0x80000000 /* 0x80000000-0x8fffffff: 256Mb NAND FLASH */ # define STM32_FSMC_BANK4 0x90000000 /* 0x90000000-0x9fffffff: 256Mb PC CARD*/ #define STM32_FSMC_BASE 0xa0000000 /* 0xa0000000-0xbfffffff: 512Mb FSMC register block */ /* 0xc0000000-0xdfffffff: 512Mb (not used) */ #define STM32_CORTEX_BASE 0xe0000000 /* 0xe0000000-0xffffffff: 512Mb Cortex-M4 block */ #define STM32_REGION_MASK 0xf0000000 #define STM32_IS_SRAM(a) ((((uint32_t)(a)) & STM32_REGION_MASK) == STM32_SRAM_BASE) #define STM32_IS_EXTSRAM(a) ((((uint32_t)(a)) & STM32_REGION_MASK) == STM32_FSMC_BANK1) /* Code Base Addresses **************************************************************/ #define STM32_BOOT_BASE 0x00000000 /* 0x00000000-0x000fffff: Aliased boot memory */ /* 0x00100000-0x07ffffff: Reserved */ #define STM32_FLASH_BASE 0x08000000 /* 0x08000000-0x080fffff: FLASH memory */ /* 0x08100000-0x0fffffff: Reserved */ #define STM32_CCMRAM_BASE 0x10000000 /* 0x10000000-0x1000ffff: 64Kb CCM data RAM */ /* 0x10010000-0x1ffeffff: Reserved */ #define STM32_SYSMEM_BASE 0x1fff0000 /* 0x1fff0000-0x1fff7a0f: System memory */ /* 0x1fff7a10-0x1fff7fff: Reserved */ #define STM32_OPTION_BASE 0x1fffc000 /* 0x1fffc000-0x1fffc007: Option bytes */ /* 0x1fffc008-0x1fffffff: Reserved */ /* SRAM Base Addresses **************************************************************/ /* 0x20000000-0x2001bfff: 112Kb aliased by bit-banding */ /* 0x2001c000-0x2001ffff: 16Kb aliased by bit-banding */ #define STM32_SRAMBB_BASE 0x22000000 /* 0x22000000- : SRAM bit-band region */ /* Peripheral Base Addresses ********************************************************/ #define STM32_APB1_BASE 0x40000000 /* 0x40000000-0x400023ff: APB1 */ /* 0x40002400-0x400027ff: Reserved */ /* 0x40002800-0x400077ff: APB1 */ /* 0x40007800-0x4000ffff: Reserved */ #define STM32_APB2_BASE 0x40010000 /* 0x40010000-0x400023ff: APB2 */ /* 0x40013400-0x400137ff: Reserved */ /* 0x40013800-0x40013bff: SYSCFG */ #define STM32_EXTI_BASE 0x40013c00 /* 0x40013c00-0x40013fff: EXTI */ /* 0x40014000-0x40014bff: APB2 */ /* 0x40014c00-0x4001ffff: Reserved */ #define STM32_AHB1_BASE 0x40020000 /* 0x40020000-0x400223ff: APB1 */ /* 0x40022400-0x40022fff: Reserved */ /* 0x40023000-0x400233ff: CRC */ /* 0x40023400-0x400237ff: Reserved */ /* 0x40023800-0x40023bff: Reset and Clock control RCC */ /* 0x40023c00-0x400293ff: AHB1 (?) */ /* 0x40029400-0x4fffffff: Reserved (?) */ #define STM32_AHB2_BASE 0x50000000 /* 0x50000000-0x5003ffff: AHB2 */ /* 0x50040000-0x5004ffff: Reserved */ /* 0x50050000-0x500503ff: AHB2 */ /* 0x50050400-0x500607ff: Reserved */ /* 0x50060800-0x50060bff: AHB2 */ /* 0x50060c00-0x5fffffff: Reserved */ /* FSMC Base Addresses **************************************************************/ #define STM32_AHB3_BASE 0x60000000 /* 0x60000000-0xa0000fff: AHB3 */ /* APB1 Base Addresses **************************************************************/ #define STM32_TIM2_BASE 0x40000000 /* 0x40000000-0x400003ff: TIM2 timer */ #define STM32_TIM3_BASE 0x40000400 /* 0x40000400-0x400007ff: TIM3 timer */ #define STM32_TIM4_BASE 0x40000800 /* 0x40000800-0x40000bff: TIM4 timer */ #define STM32_TIM5_BASE 0x40000c00 /* 0x40000c00-0x40000fff: TIM5 timer */ #define STM32_TIM6_BASE 0x40001000 /* 0x40001000-0x400013ff: TIM6 timer */ #define STM32_TIM7_BASE 0x40001400 /* 0x40001400-0x400017ff: TIM7 timer */ #define STM32_TIM12_BASE 0x40001800 /* 0x40001800-0x40001bff: TIM12 timer */ #define STM32_TIM13_BASE 0x40001c00 /* 0x40001c00-0x40001fff: TIM13 timer */ #define STM32_TIM14_BASE 0x40002000 /* 0x40002000-0x400023ff: TIM14 timer */ #define STM32_RTC_BASE 0x40002800 /* 0x40002800-0x40002bff: RTC & BKP registers */ #define STM32_BKP_BASE 0x40002850 #define STM32_WWDG_BASE 0x40002c00 /* 0x40002c00-0x40002fff: Window watchdog (WWDG) */ #define STM32_IWDG_BASE 0x40003000 /* 0x40003000-0x400033ff: Independent watchdog (IWDG) */ #define STM32_I2S2EXT_BASE 0x40003400 /* 0x40003400-0x400037ff: I2S2ext */ #define STM32_SPI2_BASE 0x40003800 /* 0x40003800-0x40003bff: SPI2/I2S2 */ #define STM32_I2S2_BASE 0x40003800 #define STM32_SPI3_BASE 0x40003c00 /* 0x40003c00-0x40003fff: SPI3/I2S3 */ #define STM32_I2S3_BASE 0x40003c00 #define STM32_I2S3EXT_BASE 0x40004000 /* 0x40003400-0x400043ff: I2S3ext */ #define STM32_USART2_BASE 0x40004400 /* 0x40004400-0x400047ff: USART2 */ #define STM32_USART3_BASE 0x40004800 /* 0x40004800-0x40004bff: USART3 */ #define STM32_UART4_BASE 0x40004c00 /* 0x40004c00-0x40004fff: UART4 */ #define STM32_UART5_BASE 0x40005000 /* 0x40005000-0x400053ff: UART5 */ #define STM32_I2C1_BASE 0x40005400 /* 0x40005400-0x400057ff: I2C1 */ #define STM32_I2C2_BASE 0x40005800 /* 0x40005800-0x40005Bff: I2C2 */ #define STM32_I2C3_BASE 0x40005c00 /* 0x40005c00-0x40005fff: I2C3 */ #define STM32_CAN1_BASE 0x40006400 /* 0x40006400-0x400067ff: bxCAN1 */ #define STM32_CAN2_BASE 0x40006800 /* 0x40006800-0x40006bff: bxCAN2 */ #define STM32_PWR_BASE 0x40007000 /* 0x40007000-0x400073ff: Power control PWR */ #define STM32_DAC_BASE 0x40007400 /* 0x40007400-0x400077ff: DAC */ #define STM32_UART7_BASE 0x40007800 /* 0x40007800-0x40007bff: UART7 */ #define STM32_UART8_BASE 0x40007c00 /* 0x40007c00-0x40007fff: UART8 */ /* APB2 Base Addresses **************************************************************/ #define STM32_TIM1_BASE 0x40010000 /* 0x40010000-0x400103ff: TIM1 timer */ #define STM32_TIM8_BASE 0x40010400 /* 0x40010400-0x400107ff: TIM8 timer */ #define STM32_USART1_BASE 0x40011000 /* 0x40011000-0x400113ff: USART1 */ #define STM32_USART6_BASE 0x40011400 /* 0x40011400-0x400117ff: USART6 */ #define STM32_ADC_BASE 0x40012000 /* 0x40012000-0x400123ff: ADC1-3 */ # define STM32_ADC1_BASE 0x40012000 /* ADC1 */ # define STM32_ADC2_BASE 0x40012100 /* ADC2 */ # define STM32_ADC3_BASE 0x40012200 /* ADC3 */ # define STM32_ADCCMN_BASE 0x40012300 /* Common */ #define STM32_SDIO_BASE 0x40012c00 /* 0x40012c00-0x40012fff: SDIO */ #define STM32_SPI1_BASE 0x40013000 /* 0x40013000-0x400133ff: SPI1 */ #define STM32_SPI4_BASE 0x40013400 /* 0x40013000-0x400137ff: SPI4 */ #define STM32_SYSCFG_BASE 0x40013800 /* 0x40013800-0x40013bff: SYSCFG */ #define STM32_EXTI_BASE 0x40013c00 /* 0x40013c00-0x40013fff: EXTI */ #define STM32_TIM9_BASE 0x40014000 /* 0x40014000-0x400143ff: TIM9 timer */ #define STM32_TIM10_BASE 0x40014400 /* 0x40014400-0x400147ff: TIM10 timer */ #define STM32_TIM11_BASE 0x40014800 /* 0x40014800-0x40014bff: TIM11 timer */ #define STM32_SPI5_BASE 0x40015000 /* 0x40015000-0x400153ff: SPI5 */ #define STM32_SPI6_BASE 0x40015400 /* 0x40015400-0x400157ff: SPI6 */ /* AHB1 Base Addresses **************************************************************/ #define STM32_GPIOA_BASE 0x40020000 /* 0x40020000-0x400203ff: GPIO Port A */ #define STM32_GPIOB_BASE 0x40020400 /* 0x40020400-0x400207ff: GPIO Port B */ #define STM32_GPIOC_BASE 0x40020800 /* 0x40020800-0x40020bff: GPIO Port C */ #define STM32_GPIOD_BASE 0X40020C00 /* 0x40020c00-0x40020fff: GPIO Port D */ #define STM32_GPIOE_BASE 0x40021000 /* 0x40021000-0x400213ff: GPIO Port E */ #define STM32_GPIOF_BASE 0x40021400 /* 0x40021400-0x400217ff: GPIO Port F */ #define STM32_GPIOG_BASE 0x40021800 /* 0x40021800-0x40021bff: GPIO Port G */ #define STM32_GPIOH_BASE 0x40021C00 /* 0x40021C00-0x40021fff: GPIO Port H */ #define STM32_GPIOI_BASE 0x40022000 /* 0x40022000-0x400223ff: GPIO Port I */ #define STM32_CRC_BASE 0x40023000 /* 0x40023000-0x400233ff: CRC */ #define STM32_RCC_BASE 0x40023800 /* 0x40023800-0x40023bff: Reset and Clock control RCC */ #define STM32_FLASHIF_BASE 0x40023c00 /* 0x40023c00-0x40023fff: Flash memory interface */ #define STM32_BKPSRAM_BASE 0x40024000 /* 0x40024000-0x40024fff: Backup SRAM (BKPSRAM) */ #define STM32_DMA1_BASE 0x40026000 /* 0x40026000-0x400263ff: DMA1 */ #define STM32_DMA2_BASE 0x40026400 /* 0x40026400-0x400267ff: DMA2 */ #define STM32_ETHERNET_BASE 0x40028000 /* 0x40028000-0x400283ff: Ethernet MAC */ /* 0x40028400-0x400287ff: Ethernet MAC */ /* 0x40028800-0x40028bff: Ethernet MAC */ /* 0x40028c00-0x40028fff: Ethernet MAC */ /* 0x40029000-0x400293ff: Ethernet MAC */ #define STM32_OTGHS_BASE 0x40040000 /* 0x40040000-0x4007ffff: USB OTG HS */ #define STM32_PERIPHBB_BASE 0x42000000 /* Peripheral bit-band region */ /* AHB2 Base Addresses **************************************************************/ #define STM32_OTGFS_BASE 0x50000000 /* 0x50000000-0x5003ffff: USB OTG FS */ #define STM32_DCMI_BASE 0x50050000 /* 0x50050000-0x500503ff: DCMI */ #define STM32_CRYP_BASE 0x50060000 /* 0x50060000-0x500603ff: CRYP */ #define STM32_HASH_BASE 0x50060400 /* 0x50060400-0x500607ff: HASH */ #define STM32_RNG_BASE 0x50060800 /* 0x50060800-0x50060bff: RNG */ /* Cortex-M4 Base Addresses *********************************************************/ /* Other registers -- see armv7-m/nvic.h for standard Cortex-M3 registers in this * address range */ #define STM32_SCS_BASE 0xe000e000 #define STM32_DEBUGMCU_BASE 0xe0042000 #endif /* __ARCH_ARM_SRC_STM32_CHIP_STM32F40XXX_MEMORYMAP_H */