/************************************************************************************
 * arch/arm/src/stm32/stm32_pwr.h
 *
 *   Copyright (C) 2009 Gregory Nutt. All rights reserved.
 *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 * 3. Neither the name NuttX nor the names of its contributors may be
 *    used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 ************************************************************************************/

#ifndef __ARCH_ARM_SRC_STM32_STM32_PWR_H
#define __ARCH_ARM_SRC_STM32_STM32_PWR_H

/************************************************************************************
 * Included Files
 ************************************************************************************/

#include <nuttx/config.h>

#include "chip.h"

/************************************************************************************
 * Pre-processor Definitions
 ************************************************************************************/

/* Register Offsets *****************************************************************/

#define STM32_PWR_CR_OFFSET    000x00  /* Power control register */
#define STM32_PWR_CSR_OFFSET   0x0004  /* Power control/status register */

/* Register Addresses ***************************************************************/


/* Register Bitfield Definitions ****************************************************/

/* Power control register */

#define PWR_CR_LPDS            (1 << 0)  /* Bit 0: Low-Power Deepsleep */
#define PWR_CR_PDDS            (1 << 1)  /* Bit 1: Power Down Deepsleep */
#define PWR_CR_CWUF            (1 << 2)  /* Bit 2: Clear Wakeup Flag */
#define PWR_CR_CSBF            (1 << 3)  /* Bit 3: Clear Standby Flag */
#define PWR_CR_PVDE            (1 << 4)  /* Bit 4: Power Voltage Detector Enable */
#define PWR_CR_PLS_SHIFT       (5)       /* Bits 7-5: PVD Level Selection */
#define PWR_CR_PLS_MASK        (7 << PWR_CR_PLS_SHIFT)
#  define PWR_CR_2p2V          (0 << PWR_CR_PLS_SHIFT) /* 000: 2.2V */
#  define PWR_CR_2p3V          (1 << PWR_CR_PLS_SHIFT) /* 001: 2.3V */
#  define PWR_CR_2p4V          (2 << PWR_CR_PLS_SHIFT) /* 010: 2.4V */
#  define PWR_CR_2p5V          (3 << PWR_CR_PLS_SHIFT) /* 011: 2.5V */
#  define PWR_CR_2p6V          (4 << PWR_CR_PLS_SHIFT) /* 100: 2.6V */
#  define PWR_CR_2p7V          (5 << PWR_CR_PLS_SHIFT) /* 101: 2.7V */
#  define PWR_CR_2p8V          (6 << PWR_CR_PLS_SHIFT) /* 110: 2.8V */
#  define PWR_CR_2p9V          (7 << PWR_CR_PLS_SHIFT) /* 111: 2.9V */
#define PWR_CR_DBP             (1 << 8)  /* Bit 8: Disable Backup Domain write protection */

/* Power control/status register */

#define PWR_CSR_WUF            (1 << 0)  /* Bit 0: Wakeup Flag */
#define PWR_CSR_SBF            (1 << 1)  /* Bit 1: Standby Flag */
#define PWR_CSR_PVDO           (1 << 2)  /* Bit 2: PVD Output */
#define PWR_CSR_EWUP           (1 << 8)  /* Bit 8: Enable WKUP pin */

/************************************************************************************
 * Public Types
 ************************************************************************************/

/************************************************************************************
 * Public Data
 ************************************************************************************/

/************************************************************************************
 * Public Functions
 ************************************************************************************/

#endif /* __ARCH_ARM_SRC_STM32_STM32_PWR_H */