/************************************************************************************
 * arch/arm/src/stm32/stm32_usbhost.h
 *
 *   Copyright (C) 2012 Gregory Nutt. All rights reserved.
 *   Author: Gregory Nutt <gnutt@nuttx.org>
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 * 3. Neither the name NuttX nor the names of its contributors may be
 *    used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 ************************************************************************************/

#ifndef __ARCH_ARM_SRC_STM32_STM32_USBHOST_H
#define __ARCH_ARM_SRC_STM32_STM32_USBHOST_H

/************************************************************************************
 * Included Files
 ************************************************************************************/

#include <nuttx/config.h>
#include <nuttx/usb/usbhost.h>
#include <stdint.h>

#include "chip.h"
#include "chip/stm32_otgfs.h"

#if defined(CONFIG_STM32_OTGFS) && defined(CONFIG_USBHOST)

/************************************************************************************
 * Public Functions
 ************************************************************************************/
/*
 * STM32 USB OTG FS Host Driver Support
 *
 * Pre-requisites
 *
 *  CONFIG_USBHOST      - Enable general USB host support
 *  CONFIG_STM32_OTGFS  - Enable the STM32 USB OTG FS block
 *  CONFIG_STM32_SYSCFG - Needed
 *
 * Options:
 *
 *  CONFIG_STM32_OTGFS_RXFIFO_SIZE - Size of the RX FIFO in 32-bit words.
 *    Default 128 (512 bytes)
 *  CONFIG_STM32_OTGFS_NPTXFIFO_SIZE - Size of the non-periodic Tx FIFO
 *    in 32-bit words.  Default 96 (384 bytes)
 *  CONFIG_STM32_OTGFS_PTXFIFO_SIZE - Size of the periodic Tx FIFO in 32-bit
 *    words.  Default 96 (384 bytes)
 *  CONFIG_STM32_OTGFS_SOFINTR - Enable SOF interrupts.  Why would you ever
 *    want to do that?
 *  CONFIG_STM32_USBHOST_REGDEBUG - Enable very low-level register access
 *    debug.  Depends on CONFIG_DEBUG.
 */

/************************************************************************************
 * Public Functions
 ************************************************************************************/

#ifndef __ASSEMBLY__

#undef EXTERN
#if defined(__cplusplus)
#define EXTERN extern "C"
extern "C" {
#else
#define EXTERN extern
#endif

/***********************************************************************************
 * Name: stm32_usbhost_vbusdrive
 *
 * Description:
 *   Enable/disable driving of VBUS 5V output.  This function must be provided be
 *   each platform that implements the STM32 OTG FS host interface
 *
 *   "On-chip 5 V VBUS generation is not supported. For this reason, a charge pump 
 *    or, if 5 V are available on the application board, a basic power switch, must 
 *    be added externally to drive the 5 V VBUS line. The external charge pump can 
 *    be driven by any GPIO output. When the application decides to power on VBUS 
 *    using the chosen GPIO, it must also set the port power bit in the host port 
 *    control and status register (PPWR bit in OTG_FS_HPRT).
 *
 *   "The application uses this field to control power to this port, and the core 
 *    clears this bit on an overcurrent condition."
 *
 * Input Parameters:
 *   iface - For future growth to handle multiple USB host interface.  Should be zero.
 *   enable - true: enable VBUS power; false: disable VBUS power
 *
 * Returned Value:
 *   None
 *
 ***********************************************************************************/

EXTERN void stm32_usbhost_vbusdrive(int iface, bool enable);

#undef EXTERN
#if defined(__cplusplus)
}
#endif

#endif /* __ASSEMBLY__ */
#endif /* CONFIG_STM32_OTGFS && CONFIG_USBHOST */
#endif /* __ARCH_ARM_SRC_STM32_STM32_USBHOST_H */