/******************************************************************************************** * arch/mips/include/mips32/cp0.h * * Copyright (C) 2011 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ********************************************************************************************/ #ifndef __ARCH_MIPS_INCLUDE_MIPS32_CP0_H #define __ARCH_MIPS_INCLUDE_MIPS32_CP0_H /******************************************************************************************** * Included Files ********************************************************************************************/ #include /******************************************************************************************** * Pre-Processor Definitions ********************************************************************************************/ /* CP0 Register Addresses *******************************************************************/ #ifdef __ASSEMBLY__ # define MIPS32_CP0_INDEX1 $0,0 /* Index into the TLB array */ # define MIPS32_CP0_RANDOM1 $1,0 /* Randomly generated index into the TLB array */ # define MIPS32_CP0_ENTRYLO01 $2,0 /* LS TLB entry for even-numbered pages */ # define MIPS32_CP0_ENTRYLO11 $3,0 /* LS TLB entry for odd-numbered pages */ # define MIPS32_CP0_CONTEXT2 $4,0 /* Page table address */ # define MIPS32_CP0_PAGEMASK1 $5,0 /* Variable page sizes in TLB entries */ # define MIPS32_CP0_WIRED1 $6,0 /* umber of fixed (“wired”) TLB entries */ # define MIPS32_CP0_BADVADDR $8,0 /* Address of most recent exception */ # define MIPS32_CP0_COUNT $9,0 /* Processor cycle count */ # define MIPS32_CP0_ENTRYHI1 $10,0 /* High-order portion of the TLB entry */ # define MIPS32_CP0_COMPARE $11,0 /* Timer interrupt control */ # define MIPS32_CP0_STATUS $12,0 /* Processor status and control */ # define MIPS32_CP0_CAUSE $13,0 /* Cause of last general exception */ # define MIPS32_CP0_EPC $14,0 /* Program counter at last exception */ # define MIPS32_CP0_PRID $15,0 /* Processor identification and revision */ # define MIPS32_CP0_CONFIG $16,0 /* Configuration register */ # define MIPS32_CP0_CONFIG1 $16,1 /* Configuration register 1 */ # define MIPS32_CP0_CONFIG2 $16,2 /* Configuration register 3 */ # define MIPS32_CP0_CONFIG3 $16,2 /* Configuration register 3 */ # define MIPS32_CP0_LLADDR $17,0 /* Load linked address */ # define MIPS32_CP0_WATCHLO2 $18,0 /* LS Watchpoint address */ # define MIPS32_CP0_WATCHHI2 $19,0 /* MS Watchpoint address and mask */ # define MIPS32_CP0_DEBUG3 $23,0 /* Debug control and exception status */ # define MIPS32_CP0_DEPC3 $24,0 /* Program counter at last debug exception */ # define MIPS32_CP0_ERRCTL $26,0 /* Controls access data CACHE instruction */ # define MIPS32_CP0_TAGLO $28,0 /* LS portion of cache tag interface */ # define MIPS32_CP0_DATALO $28,1 /* LS portion of cache tag interface */ # define MIPS32_CP0_TAGHI $29,0 /* MS portion of cache tag interface */ # define MIPS32_CP0_DATAHI $29,1 /* MS portion of cache tag interface */ # define MIPS32_CP0_ERROREPC2 $30,0 /* Program counter at last error */ # define MIPS32_CP0_DESAVE3 $31,0 /* Debug handler scratchpad register */ #endif /* CP0 Registers ****************************************************************************/ /* Register Number: 0 Sel: 0 Name: Index * Function: Index into the TLB array * Compliance Level: Required for TLB-based MMUs; Optional otherwise. */ #define CP0_INDEX_SHIFT (0) /* Bits 0-(n-1): TLB Index */ #define CP0_INDEX_MASK (0x7fffffff) #define CP0_INDEX_P (1 << 31) /* Bit 31: Probe failure */ /* Register Number: 1 Sel: 0 Name: Random * Function: Randomly generated index into the TLB array * Compliance Level: Required for TLB-based MMUs; Optional otherwise. * * This is a 32-bit register containing a random TLB index. The valid width is some fixed * number, 'n', but the upper bits are padded so that no fields need be defined for this * register. */ /* Register Number: 2 Sel: 0 Name: EntryLo0 * Function: Low-order portion of the TLB entry for even-numbered virtual pages * Compliance Level: EntryLo0 is Required for a TLB-based MMU; Optional * otherwise. * * Register Number: 3 Sel: 0 Name: EntryLo1 * Function: Low-order portion of the TLB entry for odd-numbered virtual pages * Compliance Level: EntryLo1 is Required for a TLB-based MMU; Optional otherwise. */ #define CP0_ENTRYLO_G (1 << 0) /* Bit 0: Global bit */ #define CP0_ENTRYLO_V (1 << 1) /* Bit 1: Valild bit */ #define CP0_ENTRYLO_D (1 << 2) /* Bit 2: Dirty bit */ #define CP0_ENTRYLO_C_SHIFT (3) /* Bits 3-5: Coherency attribute */ #define CP0_ENTRYLO_C_MASK (7 << CP0_ENTRYLO_CSHIFT) # define CP0_ENTRYLO_UNCACHED (2 << CP0_ENTRYLO_CSHIFT) # define CP0_ENTRYLO_CACHEABLE (3 << CP0_ENTRYLO_CSHIFT) #define CP0_ENTRYLO_PFN_SHIFT (6) /* Bits 6-29: Page frame number */ #define CP0_ENTRYLO_PFN_MASK (0x00ffffff << CP0_ENTRYLO_CSHIFT) /* Register Number: 4 Sel: 0 Name: Context * Function: Pointer to page table entry in memory * Compliance Level: Required for TLB-based MMUs; Optional otherwise. */ #define CP0_CONTEXT_BADVPN2_SHIFT (4) /* Bits 4-22: Virtual address that cause an excpetion */ #define CP0_CONTEXT_BADVPN2_MASK (0x0007ffff << CP0_CONTEXT_BADVPN2_SHIFT) #define CP0_CONTEXT_PTEBASE_SHIFT (23) /* Bits 23-31: Page table base address */ #define CP0_CONTEXT_PTEBASE_MASK (0x000001ff << CP0_CONTEXT_PTEBASE_SHIFT) /* Register Number: 5 Sel: 0 Name: PageMask * Function: Control for variable page size in TLB entries. * Compliance Level: Required for TLB-based MMUs; Optional otherwise. */ #define CP0_PAGEMASK_SHIFT (13) /* Bits 13-28: Page mask */ #define CP0_PAGEMASK_MASK (0xffff << CP0_PAGEMASK_SHIFT) # define CP0_PAGEMASK_4KB (0x0000 << CP0_PAGEMASK_SHIFT) # define CP0_PAGEMASK_16KB (0x0003 << CP0_PAGEMASK_SHIFT) # define CP0_PAGEMASK_64KB (0x000f << CP0_PAGEMASK_SHIFT) # define CP0_PAGEMASK_256KB (0x003f << CP0_PAGEMASK_SHIFT) # define CP0_PAGEMASK_1MB (0x00ff << CP0_PAGEMASK_SHIFT) # define CP0_PAGEMASK_4MB (0x03ff << CP0_PAGEMASK_SHIFT) # define CP0_PAGEMASK_16MB (0x0fff << CP0_PAGEMASK_SHIFT) # define CP0_PAGEMASK_64MB (0x3fff << CP0_PAGEMASK_SHIFT) # define CP0_PAGEMASK_256MB (0xffff << CP0_PAGEMASK_SHIFT) /* Register Number: 6 Sel: 0 Name: Wired * Function: Controls the number of fixed (“wired”) TLB entries * Compliance Level: Required for TLB-based MMUs; Optional otherwise. * * This is a 32-bit register containing the TLB wired boundary. The valid width is some * fixed number, 'n', but the upper bits are padded so that no fields need be defined for * this register. * * Register Number: 7 Sel: all (Reserved for future extensions) * * Register Number: 8 Sel: 0 Name: BadVAddr * Function: Reports the address for the most recent address-related exception * Compliance Level: Required. * * This register contains a 32-bit address value; No fields need be defined for this * register. * * Register Number: 9 Sel: 0 Name: Count * Function: Processor cycle count * Compliance Level: Required. * * This register contains a 32-bit count value; No fields need be defined for this * register. * * Register Number: 9 Sel: 6-7 (Available for implementation dependent user) */ /* Register Number: 10 Sel: 0 Name: EntryHi * Function: High-order portion of the TLB entry * Compliance Level: Required for TLB-based MMU; Optional otherwise. */ #define CP0_ENTRYHI_ASID_SHIFT (0) /* Bits 0-7: Address space identifier */ #define CP0_ENTRYHI_ASID_MASK (0xff << CP0_ENTRYHI_ASID_SHIFT) #define CP0_ENTRYHI_VPN2_SHIFT (13) /* Bits 13-31: Virtual address */ #define CP0_ENTRYHI_VPN2_MASK (0x0007ffff << CP0_ENTRYHI_VPN2_SHIFT) /* Register Number: 11 Sel: 0 Name: Compare * Function: Timer interrupt control * Compliance Level: Required. * * This register contains a 32-bit compare value; No fields need be defined for this * register. * * Register Number: 11 Sel: 6-7 (Available for implementation dependent user) */ /* Register Number: 12 Sel: 0 Name: Status * Function: Processor status and control * Compliance Level: Required. */ #define CP0_STATUS_IE (1 << 0) /* Bit 0: Interrupt Enable */ #define CP0_STATUS_EXL (1 << 1) /* Bit 1: Exception Level */ #define CP0_STATUS_ERL (1 << 2) /* Bit 2: Error Level */ #define CP0_STATUS_KSU_SHIFT (3) /* Bits 3-4: Operating mode (with supervisor mode) */ #define CP0_STATUS_KSU_MASK (3 << CP0_STATUS_KSU_SHIFT) # define CP0_STATUS_KSU_KERNEL (0 << CP0_STATUS_KSU_SHIFT) # define CP0_STATUS_KSU_SUPER (1 << CP0_STATUS_KSU_SHIFT) # define CP0_STATUS_KSU_USER (2 << CP0_STATUS_KSU_SHIFT) #define CP0_STATUS_UM (1 << 4) /* Bit 4: Operating mode == USER (No supervisor mode) */ #define CP0_STATUS_UX (1 << 5) /* Bit 5: Enables 64-bit user address space (Not MIPS32) */ #define CP0_STATUS_SX (1 << 6) /* Bit 6: Enables 64-bit supervisor address space (Not MIPS32) */ #define CP0_STATUS_KX (1 << 7) /* Bit 7: Enables 64-bit kernel address space (Not MIPS32) */ #define CP0_STATUS_IM_SHIFT (8) /* Bits 8-15: Interrupt Mask */ #define CP0_STATUS_IM_MASK (0xff << CP0_STATUS_IM_SHIFT) # define CP0_STATUS_IM_SWINTS (0x03 << CP0_STATUS_IM_SHIFT) /* IM0-1 = Software interrupts */ # define CP0_STATUS_IM0 (0x01 << CP0_STATUS_IM_SHIFT) # define CP0_STATUS_IM1 (0x02 << CP0_STATUS_IM_SHIFT) # define CP0_STATUS_IM_HWINTS (0x7c << CP0_STATUS_IM_SHIFT) /* IM2-6 = Hardware interrupts */ # define CP0_STATUS_IM2 (0x04 << CP0_STATUS_IM_SHIFT) # define CP0_STATUS_IM3 (0x08 << CP0_STATUS_IM_SHIFT) # define CP0_STATUS_IM4 (0x10 << CP0_STATUS_IM_SHIFT) # define CP0_STATUS_IM5 (0x20 << CP0_STATUS_IM_SHIFT) # define CP0_STATUS_IM6 (0x40 << CP0_STATUS_IM_SHIFT) # define CP0_STATUS_IM_TIMER (0x80 << CP0_STATUS_IM_SHIFT) /* IM7 = Hardware/Timer/Perf interrupts */ # define CP0_STATUS_IM7 (0x80 << CP0_STATUS_IM_SHIFT) # define CP0_STATUS_IM_ALL (0xff << CP0_STATUS_IM_SHIFT) #define CP0_STATUS_IMPL_SHIFT (16) /* Bits 16-17: Implementation dependent */ #define CP0_STATUS_IMPL_MASK (3 << CP0_STATUS_IMPL_SHIFT) #define CP0_STATUS_NMI (1 << 19) /* Bit 19: Reset exception due to an NMI */ #define CP0_STATUS_SR (1 << 20) /* Bit 20: Reset exception due to a Soft Reset */ #define CP0_STATUS_TS (1 << 21) /* Bit 21: TLB detected match on multiple entries */ #define CP0_STATUS_BEV (1 << 22) /* Bit 22: Location of exception vectors 1->Bootstrap */ #define CP0_STATUS_PX (1 << 23) /* Bit 23: Enables 64-bit operations (Not MIPS32) */ #define CP0_STATUS_MX (1 << 24) /* Bit 24: Enables MDMX™ (Not MIPS32) */ #define CP0_STATUS_RE (1 << 25) /* Bit 25: Enable reverse-endian memory in user mode */ #define CP0_STATUS_FR (1 << 26) /* Bit 26: Controls the floating point register mode (Not MIPS32) */ #define CP0_STATUS_RP (1 << 27) /* Bit 27: Enables reduced power mode */ #define CP0_STATUS_CU0 (1 << 28) /* Bit 28: Controls access to coprocessor 0 */ #define CP0_STATUS_CU1 (1 << 29) /* Bit 29: Controls access to coprocessor 1 */ #define CP0_STATUS_CU2 (1 << 30) /* Bit 30: Controls access to coprocessor 2 */ #define CP0_STATUS_CU3 (1 << 31) /* Bit 31: Controls access to coprocessor 3 */ /* Register Number: 13 Sel: 0 Name: Cause * Function: Cause of last general exception * Compliance Level: Required. */ #define CP0_CAUSE_EXCCODE_SHIFT (2) /* Bits 2-6: Exception code */ #define CP0_CAUSE_EXCCODE_MASK (31 << CP0_CAUSE_EXCCODE_SHIFT) # define CP0_CAUSE_EXCCODE_INT (0 << CP0_CAUSE_EXCCODE_SHIFT) /* Interrupt */ # define CP0_CAUSE_EXCCODE_TLBL (2 << CP0_CAUSE_EXCCODE_SHIFT) /* TLB exception (load or instruction fetch) */ # define CP0_CAUSE_EXCCODE_TLBS (3 << CP0_CAUSE_EXCCODE_SHIFT) /* TLB exception (store) */ # define CP0_CAUSE_EXCCODE_ADEL (4 << CP0_CAUSE_EXCCODE_SHIFT) /* Address error exception (load or instruction fetch) */ # define CP0_CAUSE_EXCCODE_ADES (5 << CP0_CAUSE_EXCCODE_SHIFT) /* Address error exception (store) */ # define CP0_CAUSE_EXCCODE_IBE (6 << CP0_CAUSE_EXCCODE_SHIFT) /* Bus error exception (instruction fetch) */ # define CP0_CAUSE_EXCCODE_DBE (7 << CP0_CAUSE_EXCCODE_SHIFT) /* Bus error exception (data reference: load or store) */ # define CP0_CAUSE_EXCCODE_SYS (8 << CP0_CAUSE_EXCCODE_SHIFT) /* Syscall exception */ # define CP0_CAUSE_EXCCODE_BP (9 << CP0_CAUSE_EXCCODE_SHIFT) /* Breakpoint exception */ # define CP0_CAUSE_EXCCODE_RI (10 << CP0_CAUSE_EXCCODE_SHIFT) /* Reserved instruction exception */ # define CP0_CAUSE_EXCCODE_CPU (11 << CP0_CAUSE_EXCCODE_SHIFT) /* Coprocessor Unusable exception */ # define CP0_CAUSE_EXCCODE_OV (12 << CP0_CAUSE_EXCCODE_SHIFT) /* Arithmetic Overflow exception */ # define CP0_CAUSE_EXCCODE_TR (13 << CP0_CAUSE_EXCCODE_SHIFT) /* Trap exception */ # define CP0_CAUSE_EXCCODE_FPE (15 << CP0_CAUSE_EXCCODE_SHIFT) /* Floating point exception */ # define CP0_CAUSE_EXCCODE_C2E (18 << CP0_CAUSE_EXCCODE_SHIFT) /* Precise Coprocessor 2 exceptions */ # define CP0_CAUSE_EXCCODE_MDMX (22 << CP0_CAUSE_EXCCODE_SHIFT) /* MDMX Unusable (MIPS64) */ # define CP0_CAUSE_EXCCODE_WATCH (23 << CP0_CAUSE_EXCCODE_SHIFT) /* WatchHi/WatchLo address */ # define CP0_CAUSE_EXCCODE_MCHECK (24 << CP0_CAUSE_EXCCODE_SHIFT) /* Machine check */ # define CP0_CAUSE_EXCCODE_CACHEERR (30 << CP0_CAUSE_EXCCODE_SHIFT) /* Cache error */ #define CP0_CAUSE_IP0 (1 << 8) /* Bit 8: Controls request for software interrupt 0 */ #define CP0_CAUSE_IP1 (1 << 9) /* Bit 9: Controls request for software interrupt 1 */ #define CP0_CAUSE_IP_SHIFT (10) /* Bits 10-15: Pending external interrupts */ #define CP0_CAUSE_IP_MASK (0x3f << CP0_CAUSE_IP_SHIFT) # define CP0_CAUSE_IP2 (0x10 << CP0_CAUSE_IP_SHIFT) /* Hardware interrupt 0 */ # define CP0_CAUSE_IP3 (0x11 << CP0_CAUSE_IP_SHIFT) /* Hardware interrupt 1 */ # define CP0_CAUSE_IP4 (0x12 << CP0_CAUSE_IP_SHIFT) /* Hardware interrupt 2 */ # define CP0_CAUSE_IP5 (0x13 << CP0_CAUSE_IP_SHIFT) /* Hardware interrupt 3 */ # define CP0_CAUSE_IP6 (0x14 << CP0_CAUSE_IP_SHIFT) /* Hardware interrupt 4 */ # define CP0_CAUSE_IP7 (0x15 << CP0_CAUSE_IP_SHIFT) /* Hardware interrupt 5, timer or performance counter interrupt */ #define CP0_CAUSE_WP (1 << 22) /* Watch exception was deferred */ #define CP0_CAUSE_IV (1 << 23) /* Bit 23: Interrupt exception uses special interrupt vector */ #define CP0_CAUSE_CE_SHIFT (28) /* Bits 28-29: Coprocessor unit number fo Coprocessor Unusable exception */ #define CP0_CAUSE_CE_MASK (3 << CP0_CAUSE_CE_SHIFT) #define CP0_CAUSE_BD (1 << 31) /* Bit 31: Last exception occurred in a branch delay slot */ /* Register Number: 14 Sel: 0 Name: EPC * Function: Program counter at last exception * Compliance Level: Required. * * This register contains a 32-bit address value; No fields need be defined for this * register. */ /* Register Number: 15 Sel: 0 Name: PRId * Function: Processor identification and revision * Compliance Level: Required. */ #define CP0_PRID_REV_SHIFT (0) /* Bits 0-7: Revision number of the processor */ #define CP0_PRID_REV_MASK (0xff << CP0_PRID_REV_SHIFT) #define CP0_PRID_PROCID_SHIFT (8) /* Bits 8-15: Type of processor */ #define CP0_PRID_PROCID_MASK (0xff << CP0_PRID_PROCID_SHIFT) #define CP0_PRID_COMPANY_SHIFT (16) /* Bits 16-23: Company ID */ #define CP0_PRID_COMPANY_MASK (0xff << CP0_PRID_COMPANY_SHIFT) #define CP0_PRID_OPTIONS_SHIFT (24) /* Bits 24-31: Company-dependent options */ #define CP0_PRID_OPTIONS_MASK (0xff << CP0_PRID_OPTIONS_SHIFT) /* Register Number: 16 Sel: 0 Name: Config * Function: Configuration register * Compliance Level: Required. */ #define CP0_CONFIG_K0_SHIFT (0) /* Bits 0-2: KSEG0 coherency algorithm */ #define CP0_CONFIG_K0_MASK (7 << CP0_CONFIG_K0_SHIFT) # define CP0_CONFIG_K0_UNCACHED (2 << CP0_CONFIG_K0_SHIFT) # define CP0_CONFIG_K0_CACHEABLE (3 << CP0_CONFIG_K0_SHIFT) #define CP0_CONFIG_MT_SHIFT (7) /* Bits 7-9: MMU Type */ #define CP0_CONFIG_MT_MASK (7 << CP0_CONFIG_MT_SHIFT) # define CP0_CONFIG_MT_NONE (0 << CP0_CONFIG_MT_SHIFT) /* None */ # define CP0_CONFIG_MT_TLB (1 << CP0_CONFIG_MT_SHIFT) /* Standard TLB */ # define CP0_CONFIG_MT_BAT (2 << CP0_CONFIG_MT_SHIFT) /* Standard BAT */ # define CP0_CONFIG_MT_FIXED (3 << CP0_CONFIG_MT_SHIFT) /* Standard fixed mapping */ #define CP0_CONFIG_AR_SHIFT (10) /* Bits 10-12: Architecture revision level */ #define CP0_CONFIG_AR_MASK (7 << CP0_CONFIG_AR_SHIFT) # define CP0_CONFIG_AR_REV1 (0 << CP0_CONFIG_AR_SHIFT) # define CP0_CONFIG_AR_REV2 (1 << CP0_CONFIG_AR_SHIFT) #define CP0_CONFIG_AT_SHIFT (13) /* Bits 13-14: Architecture type implemented by the processor */ #define CP0_CONFIG_AT_MASK (3 << CP0_CONFIG_AT_SHIFT) # define CP0_CONFIG_AT_MIPS32 (0 << CP0_CONFIG_AT_SHIFT) /* MIPS32 */ # define CP0_CONFIG_AT_MIPS64CMP (0 << CP0_CONFIG_AT_SHIFT) /* MIPS64 with 32-bit compatibility segments */ # define CP0_CONFIG_AT_MIPS64 (1 << CP0_CONFIG_AT_SHIFT) /* MIPS64 with access to all address segments */ #define CP0_CONFIG_BE (1 << 15) /* Bit 15: Processor is running in big-endian mode */ #define CP0_CONFIG_IMPL_SHIFT (16) /* Bits 16-30: Implementation dependent */ #define CP0_CONFIG_IMPL_MASK (0x7fff << CP0_CONFIG_IMPL_SHIFT) #define CP0_CONFIG_M (1 << 31) /* Bit 31: Config1 register is implemented at select=1 */ /* Register Number: 16 Sel: 1 Name: Config1 * Function: Configuration register 1 * Compliance Level: Required. */ #define CP0_CONFIG1_FP (1 << 0 FPU implemented #define CP0_CONFIG1_EP (1 << 1 EJTAG implemented #define CP0_CONFIG1_CA (1 << 2 Code compression (MIPS16) implemented #define CP0_CONFIG1_WR (1 << 3 Watch registers implemented #define CP0_CONFIG1_PC (1 << 4 Performance Counter registers implemented #define CP0_CONFIG1_MD (1 << 5 MDMX ASE implemented (MIPS64) #define CP0_CONFIG1_C2 (1 << 6 Coprocessor 2 implemented #define CP0_CONFIG1_DA_SHIFT (7) /* Bits 7-9: Dcache associativity */ #define CP0_CONFIG1_DA_MASK (7 << CP0_CONFIG1_DA_SHIFT) # define CP0_CONFIG1_DA_DIRECT (0 << CP0_CONFIG1_DA_SHIFT) /* Direct mapped */ # define CP0_CONFIG1_DA_2WAY (1 << CP0_CONFIG1_DA_SHIFT) /* 2-way */ # define CP0_CONFIG1_DA_3WAY (2 << CP0_CONFIG1_DA_SHIFT) /* 3-way */ # define CP0_CONFIG1_DA_4WAY (3 << CP0_CONFIG1_DA_SHIFT) /* 4-way */ # define CP0_CONFIG1_DA_5WAY (4 << CP0_CONFIG1_DA_SHIFT) /* 5-way */ # define CP0_CONFIG1_DA_6WAY (5 << CP0_CONFIG1_DA_SHIFT) /* 6-way */ # define CP0_CONFIG1_DA_7WAY (6 << CP0_CONFIG1_DA_SHIFT) /* 7-way */ # define CP0_CONFIG1_DA_8WAY (7 << CP0_CONFIG1_DA_SHIFT) /* 8-way */ #define CP0_CONFIG1_DL_SHIFT (10) /* Bits 10-12: Dcache line size */ #define CP0_CONFIG1_DL_MASK (7 << CP0_CONFIG1_DL_SHIFT) # define CP0_CONFIG1_DL_NONE (0 << CP0_CONFIG1_DL_SHIFT) /* No Dcache present */ # define CP0_CONFIG1_DL_4BYTES (1 << CP0_CONFIG1_DL_SHIFT) /* 4 bytes */ # define CP0_CONFIG1_DL_8BYTES (2 << CP0_CONFIG1_DL_SHIFT) /* 8 bytes */ # define CP0_CONFIG1_DL_16BYTES (3 << CP0_CONFIG1_DL_SHIFT) /* 16 bytes */ # define CP0_CONFIG1_DL_32BYTES (4 << CP0_CONFIG1_DL_SHIFT) /* 32 bytes */ # define CP0_CONFIG1_DL_64BYTES (5 << CP0_CONFIG1_DL_SHIFT) /* 64 bytes */ # define CP0_CONFIG1_DL_128BYTES (6 << CP0_CONFIG1_DL_SHIFT) /* 128 bytes */ #define CP0_CONFIG1_DS_SHIFT (13) /* Bits 13-15: Dcache sets per way */ #define CP0_CONFIG1_DS_MASK (7 << CP0_CONFIG1_DS_SHIFT) # define CP0_CONFIG1_DS_64SETS (0 << CP0_CONFIG1_DS_SHIFT) # define CP0_CONFIG1_DS_128SETS (1 << CP0_CONFIG1_DS_SHIFT) # define CP0_CONFIG1_DS_256SETS (2 << CP0_CONFIG1_DS_SHIFT) # define CP0_CONFIG1_DS_512SETS (3 << CP0_CONFIG1_DS_SHIFT) # define CP0_CONFIG1_DS_1024SETS (4 << CP0_CONFIG1_DS_SHIFT) # define CP0_CONFIG1_DS_2048SETS (5 << CP0_CONFIG1_DS_SHIFT) # define CP0_CONFIG1_DS_4096SETS (6 << CP0_CONFIG1_DS_SHIFT) #define CP0_CONFIG1_IA_SHIFT (16) /* Bits 16-18: Icache associativity */ #define CP0_CONFIG1_IA_MASK (7 << CP0_CONFIG1_IA_SHIFT) # define CP0_CONFIG1_IA_DIRECT (0 << CP0_CONFIG1_IA_SHIFT) /* Direct mapped */ # define CP0_CONFIG1_IA_2WAY (1 << CP0_CONFIG1_IA_SHIFT) /* 2-way */ # define CP0_CONFIG1_IA_3WAY (2 << CP0_CONFIG1_IA_SHIFT) /* 3-way */ # define CP0_CONFIG1_IA_4WAY (3 << CP0_CONFIG1_IA_SHIFT) /* 4-way */ # define CP0_CONFIG1_IA_5WAY (4 << CP0_CONFIG1_IA_SHIFT) /* 5-way */ # define CP0_CONFIG1_IA_6WAY (5 << CP0_CONFIG1_IA_SHIFT) /* 6-way */ # define CP0_CONFIG1_IA_7WAY (6 << CP0_CONFIG1_IA_SHIFT) /* 7-way */ # define CP0_CONFIG1_IA_8WAY (7 << CP0_CONFIG1_IA_SHIFT) /* 8-way */ #define CP0_CONFIG1_IL_SHIFT (19) /* Bits 19-21: Icache line size */ #define CP0_CONFIG1_IL_MASK (7 << CP0_CONFIG1_IL_SHIFT) # define CP0_CONFIG1_IL_NONE (0 << CP0_CONFIG1_IL_SHIFT) /* No Dcache present */ # define CP0_CONFIG1_IL_4BYTES (1 << CP0_CONFIG1_IL_SHIFT) /* 4 bytes */ # define CP0_CONFIG1_IL_8BYTES (2 << CP0_CONFIG1_IL_SHIFT) /* 8 bytes */ # define CP0_CONFIG1_IL_16BYTES (3 << CP0_CONFIG1_IL_SHIFT) /* 16 bytes */ # define CP0_CONFIG1_IL_32BYTES (4 << CP0_CONFIG1_IL_SHIFT) /* 32 bytes */ # define CP0_CONFIG1_IL_64BYTES (5 << CP0_CONFIG1_IL_SHIFT) /* 64 bytes */ # define CP0_CONFIG1_IL_128BYTES (6 << CP0_CONFIG1_IL_SHIFT) /* 128 bytes */ #define CP0_CONFIG1_IS_SHIFT (22) /* Bits 22-24: Icache sets per way */ #define CP0_CONFIG1_IS_MASK (7 << CP0_CONFIG1_IS_SHIFT) # define CP0_CONFIG1_IS_64SETS (0 << CP0_CONFIG1_IS_SHIFT) # define CP0_CONFIG1_IS_128SETS (1 << CP0_CONFIG1_IS_SHIFT) # define CP0_CONFIG1_IS_256SETS (2 << CP0_CONFIG1_IS_SHIFT) # define CP0_CONFIG1_IS_512SETS (3 << CP0_CONFIG1_IS_SHIFT) # define CP0_CONFIG1_IS_1024SETS (4 << CP0_CONFIG1_IS_SHIFT) # define CP0_CONFIG1_IS_2048SETS (5 << CP0_CONFIG1_IS_SHIFT) # define CP0_CONFIG1_IS_4096SETS (6 << CP0_CONFIG1_IS_SHIFT) #define CP0_CONFIG1_MMUSIZE_SHIFT (25) /* Bits 25-30: Number of entries in the TLB minus one */ #define CP0_CONFIG1_MMUSIZE_MASK (0x3f << CP0_CONFIG1_MMUSIZE_SHIFT) #define CP0_CONFIG1_M (1 << 31) /* Bit 31: Config2 register is present */ /* Register Number: 16 Sel: 2 Name: Config2 * Function: Configuration register 2 * Compliance Level: Optional. */ #define CP0_CONFIG2_TBS_SHIFT (0) /* Bits 0-30: Configuration of the level 2 and level 3 caches */ #define CP0_CONFIG2_TBS_MASK (0x7fffffff << CP0_CONFIG2_TBS_SHIFT) #define CP0_CONFIG2_M (1 << 31) /* Bit 31: Config3 register is present */ /* Register Number: 16 Sel: 3 Name: Config3 * Function: Configuration register 3 * Compliance Level: Optional. */ #define CP0_CONFIG3_TL (1 << 0) /* Bit 0: Trace Logic implemented */ #define CP0_CONFIG3_SM (1 << 1) /* Bit 1: SmartMIPS™ ASE implemented */ #define CP0_CONFIG3_M (1 << 31) /* Bit 31: Config4 register is present */ /* Register Number: 16 Sel: 6-7 (Available for implementation dependent use) */ /* Register Number: 17 Sel: 0 Name: LLAddr * Function: Load linked address * Compliance Level: Optional. * * This register contains a 32-bit address value; No fields need be defined for this * register. */ /* Register Number: 18 Sel: 0-n Name: WatchLo * Function: Watchpoint address * Compliance Level: Optional. */ #define CP0_WATCHLO_W (1 << 0) /* Bit 0: Exceptions are enabled for stores */ #define CP0_WATCHLO_R (1 << 1) /* Bit 0: Exceptions are enabled for loads */ #define CP0_WATCHLO_I (1 << 2) /* Bit 0: Exceptions are enabled for instructions */ #define CP0_WATCHLO_VADDR_SHIFT (3) /* Bits 3-31: Virtual address to match */ #define CP0_WATCHLO_VADDR_MASK (0x1fffffff << CP0_WATCHLO_VADDR_SHIFT) /* Register Number: 19 Sel: 0-n Name: WatchHi * Function: Watchpoint control * Compliance Level: Optional. */ #define CP0_WATCHHI_MASK_SHIFT (3) /* Bits 3-11: Mask that qualifies the WatchLo address */ #define CP0_WATCHHI_MASK_MASK (0x1ff << CP0_WATCHHI_MASK_SHIFT) #define CP0_WATCHHI_ASID_SHIFT (16) /* Bits 16-23: ASID value which to match that in the EntryHi register */ #define CP0_WATCHHI_ASID_MASK (0xff << CP0_WATCHHI_ASID_SHIFT) #define CP0_WATCHHI_G (1 << 30) /* Bit 30: Any address matcing the WatchLo addr will cause an exception */ #define CP0_WATCHHI_M (1 << 31) /* Bit 30: Another pair of WatchHi/WatchLo registers at select n+1 */ /* Register Number: 20 Sel: 0 Name: XContext * Function: in 64-bit implementations * * Register Number: 21 Sel: all (Reserved for future extensions) * * Register Number: 22 Sel: all Available for implementation dependent use) * * Register Number: 23 Sel: 0 Name: Debug * Function: EJTAG Debug register * Compliance Level: Optional, part of the EJTAG specification. * * Register Number: 24 Sel: 0 Name: DEPC * Function: Program counter at last EJTAG debug exception * Compliance Level: Optional, part of the EJTAG specification. * * This register contains a 32-bit address value; No fields need be defined for this * register. */ /* Register Number: 25 Sel: 0-n Name: PerfCnt * Function: Performance counter interface * Compliance Level: Recommended. */ #define CP0_PERFCNT_EXL (1 << 0) /* Bit 0: Enables event counting when STATUS EXL=1 ERL=0 */ #define CP0_PERFCNT_K (1 << 1) /* Bit 1: Enables event counting in Kernel Mode (EXL=0 ERL=0) */ #define CP0_PERFCNT_S (1 << 2) /* Bit 2: Enables event counting in Supervisor Mode */ #define CP0_PERFCNT_U (1 << 3) /* Bit 3: Enables event counting in User Mode */ #define CP0_PERFCNT_IE (1 << 4) /* Bit 4: Interrupt Enable */ #define CP0_PERFCNT_EVENT_SHIFT (5) /* Bits 5-10: Event to be counted */ #define CP0_PERFCNT_EVENT_MASK (0xffff << CP0_PERFCNT_EVENT_SHIFT) #define CP0_PERFCNT_M (1 << 31) /* Bit 31: Another pair of performance registers at n+2 and n+3 */ /* Register Number: 26 Sel: 0 Name: ErrCtl * Function: Parity/ECC error control and status * Compliance Level: Optional. * * The bit definitions within the ErrCtl register are implementation dependent. * * Register Number: 27 Sel: 0-3 Name: CacheErr * Function: Cache parity error control and status * Compliance Level: Optional. * * The bit definitions within the CacheErr register are implementation dependent. * * Register Number: 28 Sel: 0 Name: TagLo * Function: Low-order portion of cache tag interface * Compliance Level: Required if a cache is implemented; Optional otherwise. * * The bit definitions within the TagLo register are implementation dependent. * * Register Number: 28 Sel: 1, 3 Name: DataLo * Function: The DataLo and DataHi registers are read-only registers that * act as the interface to the cache data array and are intended for * diagnostic operation only. * Compliance Level: Optional. * * The bit definitions within the DataLo register are implementation dependent. * * Register Number: 29 Sel: 0 Name: TagHi * Function: High-order portion of cache tag interface * Compliance Level: Required if a cache is implemented; Optional otherwise. * * The bit definitions within the TagHi register are implementation dependent. * * Register Number: 29 Sel: 1, 3 Name: DataHi * Function: The DataLo and DataHi registers are read-only registers that * act as the interface to the cache data array and are intended for * diagnostic operation only. * Compliance Level: Optional. * * The bit definitions within the DataHi register are implementation dependent. * * Register Number: 30 Sel: 0 Name: ErrorEPC * Function: Program counter at last error * Compliance Level: Required. * * This register contains a 32-bit address value; No fields need be defined for this * register. * * Register Number: 31 Sel: 0 Name: DESAVE * Function: EJTAG debug exception save register * Compliance Level: Optional, part of the EJTAG specification. * * This register contains a 32-bit address value; No fields need be defined for this * register. */ /******************************************************************************************** * Public Types ********************************************************************************************/ #ifndef __ASSEMBLY__ /******************************************************************************************** * Inline Functions ********************************************************************************************/ /******************************************************************************************** * Public Function Prototypes ********************************************************************************************/ #ifdef __cplusplus #define EXTERN extern "C" extern "C" { #else #define EXTERN extern #endif #undef EXTERN #ifdef __cplusplus } #endif #endif /* __ASSEMBLY__ */ #endif /* __ARCH_MIPS_INCLUDE_MIPS32_CP0_H */