/************************************************************************************ * arch/mips/src/pic32mx/pic32mx-usbotg.h * * Copyright (C) 2011 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ************************************************************************************/ #ifndef __ARCH_MIPS_SRC_PIC32MX_PIC32MX_USBOTG_H #define __ARCH_MIPS_SRC_PIC32MX_PIC32MX_USBOTG_H /************************************************************************************ * Included Files ************************************************************************************/ #include #include "pic32mx-memorymap.h" /************************************************************************************ * Pre-Processor Definitions ************************************************************************************/ /* Register Offsets *****************************************************************/ #define PIC32MX_USBOTG_IR_OFFSET 0x0040 /* USB OTG Interrupt Flags Register */ #define PIC32MX_USBOTG_IE_OFFSET 0x0050 /* USB OTG Interrupt Enable Register */ #define PIC32MX_USBOTG_STAT_OFFSET 0x0060 /* USB Comparator and Pin Status Register */ #define PIC32MX_USBOTG_CON_OFFSET 0x0070 /* USB Resistor and Pin Control Register */ #define PIC32MX_USB_PWRC_OFFSET 0x0080 /* USB Power Control Register */ #define PIC32MX_USB_IR_OFFSET 0x0200 /* USB Pending Interrupt Register */ #define PIC32MX_USB_IE_OFFSET 0x0210 /* USB Interrupt Enable Register */ #define PIC32MX_USB_EIR_OFFSET 0x0220 /* USB Pending Error Interrupt Register */ #define PIC32MX_USB_EIE_OFFSET 0x0230 /* USB Interrupt Error Enable Register */ #define PIC32MX_USB_STAT_OFFSET 0x0240 /* USB Status FIFO Register */ #define PIC32MX_USB_CON_OFFSET 0x0250 /* USB Module Control Register */ #define PIC32MX_USB_ADDR_OFFSET 0x0260 /* USB Address Register */ #define PIC32MX_USB_FRMH_OFFSET 0x0290 /* USB Frame Counter Register (high) */ #define PIC32MX_USB_FRML_OFFSET 0x0280 /* USB Frame Counter Register (low) */ #define PIC32MX_USB_TOK_OFFSET 0x02a0 /* USB Host Control Register */ #define PIC32MX_USB_SOF_OFFSET 0x02b0 /* USB SOF Counter Register */ #define PIC32MX_USB_BDTP1_OFFSET 0x0270 /* USB Buffer Descriptor Table Pointer Register 1 */ #define PIC32MX_USB_BDTP2_OFFSET 0x02c0 /* USB Buffer Descriptor Table Pointer Register 2 */ #define PIC32MX_USB_BDTP3_OFFSET 0x02d0 /* USB Buffer Descriptor Table Pointer Register 3 */ #define PIC32MX_USB_CNFG1_OFFSET 0x02e0 /* USB Debug and Idle Register */ #define PIC32MX_USB_EP_OFFSET(n) 0x0300 /* USB Endpoint n Control Register */ #define PIC32MX_USB_EP0_OFFSET 0x0300 /* USB Endpoint 0 Control Register */ #define PIC32MX_USB_EP1_OFFSET 0x0310 /* USB Endpoint 1 Control Register */ #define PIC32MX_USB_EP2_OFFSET 0x0320 /* USB Endpoint 2 Control Register */ #define PIC32MX_USB_EP3_OFFSET 0x0330 /* USB Endpoint 3 Control Register */ #define PIC32MX_USB_EP4_OFFSET 0x0340 /* USB Endpoint 4 Control Register */ #define PIC32MX_USB_EP5_OFFSET 0x0350 /* USB Endpoint 5 Control Register */ #define PIC32MX_USB_EP6_OFFSET 0x0360 /* USB Endpoint 6 Control Register */ #define PIC32MX_USB_EP7_OFFSET 0x0370 /* USB Endpoint 7 Control Register */ #define PIC32MX_USB_EP8_OFFSET 0x0380 /* USB Endpoint 8 Control Register */ #define PIC32MX_USB_EP9_OFFSET 0x0390 /* USB Endpoint 9 Control Register */ #define PIC32MX_USB_EP10_OFFSET 0x03a0 /* USB Endpoint 10 Control Register */ #define PIC32MX_USB_EP11_OFFSET 0x03b0 /* USB Endpoint 11 Control Register */ #define PIC32MX_USB_EP12_OFFSET 0x03c0 /* USB Endpoint 12 Control Register */ #define PIC32MX_USB_EP13_OFFSET 0x03d0 /* USB Endpoint 13 Control Register */ #define PIC32MX_USB_EP14_OFFSET 0x03e0 /* USB Endpoint 14 Control Register */ #define PIC32MX_USB_EP15_OFFSET 0x03f0 /* USB Endpoint 15 Control Register */ /* Register Addresses ***************************************************************/ #define PIC32MX_USBOTG_IR (PIC32MX_USB_K1BASE+PIC32MX_USBOTG_IR_OFFSET) #define PIC32MX_USBOTG_IE (PIC32MX_USB_K1BASE+PIC32MX_USBOTG_IE_OFFSET) #define PIC32MX_USBOTG_STAT (PIC32MX_USB_K1BASE+PIC32MX_USBOTG_STAT_OFFSET) #define PIC32MX_USBOTG_CON (PIC32MX_USB_K1BASE+PIC32MX_USBOTG_CON_OFFSET) #define PIC32MX_USB_PWRC (PIC32MX_USB_K1BASE+PIC32MX_USB_PWRC_OFFSET) #define PIC32MX_USB_IR (PIC32MX_USB_K1BASE+PIC32MX_USB_IR_OFFSET) #define PIC32MX_USB_IE (PIC32MX_USB_K1BASE+PIC32MX_USB_IE_OFFSET) #define PIC32MX_USB_EIR (PIC32MX_USB_K1BASE+PIC32MX_USB_EIR_OFFSET) #define PIC32MX_USB_EIE (PIC32MX_USB_K1BASE+PIC32MX_USB_EIE_OFFSET) #define PIC32MX_USB_STAT (PIC32MX_USB_K1BASE+PIC32MX_USB_STAT_OFFSET) #define PIC32MX_USB_CON (PIC32MX_USB_K1BASE+PIC32MX_USB_CON_OFFSET) #define PIC32MX_USB_ADDR (PIC32MX_USB_K1BASE+PIC32MX_USB_ADDR_OFFSET) #define PIC32MX_USB_FRMH (PIC32MX_USB_K1BASE+PIC32MX_USB_FRMH_OFFSET) #define PIC32MX_USB_FRML (PIC32MX_USB_K1BASE+PIC32MX_USB_FRML_OFFSET) #define PIC32MX_USB_TOK (PIC32MX_USB_K1BASE+PIC32MX_USB_TOK_OFFSET) #define PIC32MX_USB_SOF (PIC32MX_USB_K1BASE+PIC32MX_USB_SOF_OFFSET) #define PIC32MX_USB_BDTP1 (PIC32MX_USB_K1BASE+PIC32MX_USB_BDTP1_OFFSET) #define PIC32MX_USB_BDTP2 (PIC32MX_USB_K1BASE+PIC32MX_USB_BDTP2_OFFSET) #define PIC32MX_USB_BDTP3 (PIC32MX_USB_K1BASE+PIC32MX_USB_BDTP3_OFFSET) #define PIC32MX_USB_CNFG1 (PIC32MX_USB_K1BASE+PIC32MX_USB_CNFG1_OFFSET) #define PIC32MX_USB_EP(n) (PIC32MX_USB_K1BASE+PIC32MX_USB_EP_OFFSET(n)) #define PIC32MX_USB_EP0 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP0_OFFSET) #define PIC32MX_USB_EP1 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP1_OFFSET) #define PIC32MX_USB_EP2 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP2_OFFSET) #define PIC32MX_USB_EP3 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP3_OFFSET) #define PIC32MX_USB_EP4 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP4_OFFSET) #define PIC32MX_USB_EP5 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP5_OFFSET) #define PIC32MX_USB_EP6 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP6_OFFSET) #define PIC32MX_USB_EP7 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP7_OFFSET) #define PIC32MX_USB_EP8 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP8_OFFSET) #define PIC32MX_USB_EP9 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP9_OFFSET) #define PIC32MX_USB_EP10 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP10_OFFSET) #define PIC32MX_USB_EP11 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP11_OFFSET) #define PIC32MX_USB_EP12 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP12_OFFSET) #define PIC32MX_USB_EP13 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP13_OFFSET) #define PIC32MX_USB_EP14 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP14_OFFSET) #define PIC32MX_USB_EP15 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP15_OFFSET) /* Register Bit-Field Definitions ***************************************************/ /* USB OTG Interrupt Flags Register */ /* USB OTG Interrupt Enable Register */ #define USBOTG_INT_VBUSVD (1 << 0) /* Bit 0: A-Device VBUS Change Indicator */ #define USBOTG_INT_SESEND (1 << 2) /* Bit 2: B-Device VBUS Change Indicator */ #define USBOTG_INT_ACTV (1 << 4) /* Bit 4: Bus Activity Indicator */ #define USBOTG_INT_SESVD (1 << 3) /* Bit 3: Session Valid Change Indicator */ #define USBOTG_INT_LSTATE (1 << 5) /* Bit 5: Line State Stable Indicator */ #define USBOTG_INT_T1MSEC (1 << 6) /* Bit 6: 1 Millisecond Timer */ #define USBOTG_INT_ID (1 << 7) /* Bit 7: ID State Change Indicator */ /* USB Comparator and Pin Status Register */ #define USBOTG_STAT_VBUSVD (1 << 0) /* Bit 0: A-VBUS Valid Indicator */ #define USBOTG_STAT_SESEND (1 << 2) /* Bit 2: B-Session End Indicator */ #define USBOTG_STAT_SESVD (1 << 3) /* Bit 3: Session Valid Indicator */ #define USBOTG_STAT_LSTATE (1 << 5) /* Bit 5: Line State Stable Indicator */ #define USBOTG_STAT_ID (1 << 7) /* Bit 7: ID Pin State Indicator */ /* USB Resistor and Pin Control Register */ #define USBOTG_CON_VBUSDIS (1 << 0) /* Bit 0: VBUS Discharge Enable */ #define USBOTG_CON_VBUSCHG (1 << 1) /* Bit 1: VBUS Charge Enable */ #define USBOTG_CON_OTGEN (1 << 2) /* Bit 2: OTG Functionality Enable */ #define USBOTG_CON_VBUSON (1 << 3) /* Bit 3: VBUS Power-on */ #define USBOTG_CON_DMPULDWN (1 << 4) /* Bit 4: D- Pull-Down Enable */ #define USBOTG_CON_DPPULDWN (1 << 5) /* Bit 5: D+ Pull-Down Enable */ #define USBOTG_CON_DMPULUP (1 << 6) /* Bit 6: D- Pull-Up Enable */ #define USBOTG_CON_DPPULUP (1 << 7) /* Bit 7: D+ Pull-Up Enable */ /* USB Power Control Register */ #define USB_PWRC_USBPWR (1 << 0) /* Bit 0: USB Operation Enable */ #define USB_PWRC_USUSPEND (1 << 1) /* Bit 1: USB Suspend Mode */ #define USB_PWRC_USBBUSY (1 << 3) /* Bit 3: USB Module Busy */ #define USB_PWRC_USLPGRD (1 << 4) /* Bit 4: USB Sleep Entry Guard */ #define USB_PWRC_UACTPND (1 << 7) /* Bit 7: USB Activity Pending */ /* USB Pending Interrupt Register */ /* USB Interrupt Enable Register */ #define USB_INT_URST (1 << 0) /* Bit 0: USB Reset Interrupt (Device mode) */ #define USB_INT_DETACH (1 << 0) /* Bit 0: USB Detach Interrupt (Host mode) */ #define USB_INT_UERR (1 << 1) /* Bit 1: USB Error Condition Interrupt */ #define USB_INT_SOF (1 << 2) /* Bit 2: SOF Token Interrupt */ #define USB_INT_TRN (1 << 3) /* Bit 3: Token Processing Complete Interrupt */ #define USB_INT_IDLE (1 << 4) /* Bit 4 : Idle Detect Interrupt */ #define USB_INT_RESUME (1 << 5) /* Bit 5: Resume Interrupt */ #define USB_INT_ATTACH (1 << 6) /* Bit 6: Peripheral Attach Interrupt */ #define USB_INT_STALL (1 << 7) /* Bit 7: STALL Handshake Interrupt */ /* USB Pending Error Interrupt Register */ /* USB Interrupt Error Enable Register */ #define USB_EINT_PID (1 << 0) /* Bit 0: PID Check Failure Flag */ #define USB_EINT_CRC5 (1 << 1) /* Bit 1: CRC5 Host Error Flag */ #define USB_EINT_EOF (1 << 1) /* Bit 1: EOF Error Flag */ #define USB_EINT_CRC16 (1 << 2) /* Bit 2: CRC16 Failure Flag */ #define USB_EINT_DFN8 (1 << 3) /* Bit 3: Data Field Size Error Flag */ #define USB_EINT_BTO (1 << 4) /* Bit 4: Bus Turnaround Time-Out Error Flag */ #define USB_EINT_DMA (1 << 5) /* Bit 5: DMA Error Flag */ #define USB_EINT_BMX (1 << 6) /* Bit 6: Bus Matrix Error Flag */ #define USB_EINT_BTS (1 << 7) /* Bit 7: Bit Stuff Error Flag */ /* USB Status FIFO Register */ #define USB_STAT_PPBI (1 << 2) /* Bit 2: Ping-Pong BD Pointer Indicator */ #define USB_STAT_DIR (1 << 3) /* Bit 3: Last BD Direction Indicator */ #define USB_STAT_ENDPT_SHIFT (4) /* Bits 4-7: Encoded Endpoint Activity */ #define USB_STAT_ENDPT_MASK (15 << USB_STAT_ENDPT_SHIFT) # define USB_STAT_ENDPT(n) ((n) << USB_STAT_ENDPT_SHIFT) /* Endpoint n, n=0..15 */ /* USB Module Control Register */ #define USB_CON_USBEN (1 << 0) /* Bit 0: USB Module Enable */ #define USB_CON_SOFEN (1 << 0) /* Bit 0: SOF Enable */ #define USB_CON_PPBRST (1 << 1) /* Bit 1: Ping-Pong Buffers Reset */ #define USB_CON_RESUME (1 << 2) /* Bit 2: RESUME Signaling Enable */ #define USB_CON_HOSTEN (1 << 3) /* Bit 3: Host Mode Enable */ #define USB_CON_USBRST (1 << 4) /* Bit 4: Module Reset */ #define USB_CON_PKTDIS (1 << 5) /* Bit 5: Packet Transfer Disable */ #define USB_CON_TOKBUSY (1 << 5) /* Bit 5: Token Busy Indicator */ #define USB_CON_SE0 (1 << 6) /* Bit 6: Live Single-Ended Zero flag */ #define USB_CON_JSTATE (1 << 7) /* Bit 7: Live Differential Receiver JSTATE flag */ /* USB Address Register */ #define USB_ADDR_DEVADDR_SHIFT (0) /* Bit 0-6: 7-bit USB Device Address */ #define USB_ADDR_DEVADDR_MASK (0x7f << USB_ADDR_DEVADDR_SHIFT) #define USB_ADDR_LSPDEN (1 << 7) /* Bit 7: Low Speed Enable Indicator */ /* USB Frame Counter Register (high) */ #define USB_FRMH_MASK 0x07 /* Bits 0-2: 11-bit frame number upper 3 bits */ /* USB Frame Counter Register (low) */ #define USB_FRML_MASK 0xff /* Bits 0-7: 11-bit frame number lower 8 bits */ /* USB Host Control Register */ #define USB_TOK_PID_SHIFT (4) /* Bits 4-7: Token Type Indicator */ #define USB_TOK_PID_MASK (15 << USB_TOK_PID_SHIFT) # define USB_TOK_PID_OUT (1 << USB_TOK_PID_SHIFT) /* OUT (TX) token type transaction */ # define USB_TOK_PID_IN (9 << USB_TOK_PID_SHIFT) /* IN (RX) token type transaction */ # define USB_TOK_PID_SETUP (13 << USB_TOK_PID_SHIFT) /* SETUP (TX) token type transaction */ #define USB_TOK_EP_SHIFT (0) /* Bits 0-3: Token Command Endpoint Address */ #define USB_TOK_EP_MASK (15 << USB_TOK_EP_SHIFT) /* USB SOF Counter Register */ #define USB_SOF_SHIFT (0) /* Bits 0-7: SOF Threshold Value */ #define USB_SOF_MASK (0xff << USB_SOF_SHIFT) # define USB_SOF_8BTYE (0x12 << USB_SOF_SHIFT) /* 8-byte packet */ # define USB_SOF_16BTYE (0x1a << USB_SOF_SHIFT) /* 16-byte packet */ # define USB_SOF_32BTYE (0x2a << USB_SOF_SHIFT) /* 32-byte packet */ # define USB_SOF_64BTYE (0x4a << USB_SOF_SHIFT) /* 64-byte packet */ /* USB Buffer Descriptor Table Pointer Register 1 */ #define USB_BDTP1_MASK 0x7e /* Bits 1-7: BDT Base Address bits 9-15 */ /* USB Buffer Descriptor Table Pointer Register 2 */ #define USB_BDTP2_MASK 0xff /* Bits 0-7: BDT Base Address bits 16-23 */ /* USB Buffer Descriptor Table Pointer Register 3 */ #define USB_BDTP3_MASK 0xff /* Bits 0-7: BDT Base Address bits 24-31 */ /* USB Debug and Idle Register */ #define USB_CNFG1_UASUSPND (1 << 0) /* Bit 0: Automatic Suspend Enable */ #define USB_CNFG1_USBSIDL (1 << 4) /* Bit 4: Stop in Idle Mode */ #define USB_CNFG1_USBFRZ (1 << 5) /* Bit 5: Freeze in Debug Mode */ #define USB_CNFG1_UOEMON (1 << 6) /* Bit 6: USB OE Monitor Enable */ #define USB_CNFG1_UTEYE (1 << 7) /* Bit 7: USB Eye-Pattern Test Enable */ /* USB Endpoint Control Register */ #define USB_EP_EPHSHK (1 << 0) /* Bit 0: Endpoint Handshake Enable */ #define USB_EP_EPSTALL (1 << 1) /* Bit 1: Endpoint Stall Status */ #define USB_EP_EPRXEN (1 << 3) /* Bit 3: Endpoint Receive Enable */ #define USB_EP_EPTXEN (1 << 2) /* Bit 2: Endpoint Transmit Enable */ #define USB_EP_EPCONDIS (1 << 4) /* Bit 4: Bidirectional Endpoint Control */ #define USB_EP_RETRYDIS (1 << 6) /* Bit 6: Retry Disable (Host mode and U1EP0 only) */ #define USB_EP_LSPD (1 << 7) /* Bit 7: Low-Speed Direct Connection Enable */ /************************************************************************************ * Public Types ************************************************************************************/ #ifndef __ASSEMBLY__ /************************************************************************************ * Inline Functions ************************************************************************************/ /************************************************************************************ * Public Function Prototypes ************************************************************************************/ #ifdef __cplusplus #define EXTERN extern "C" extern "C" { #else #define EXTERN extern #endif #undef EXTERN #ifdef __cplusplus } #endif #endif /* __ASSEMBLY__ */ #endif /* __ARCH_MIPS_SRC_PIC32MX_PIC32MX_USBOTG_H */