/**************************************************************************** * arch/z8/include/z8/irq.h * arch/chip/irq.h * * Copyright (C) 2008-2009 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /* This file should never be included directed but, rather, * only indirectly through nuttx/irq.h (via arch/irq.h) */ #ifndef __ARCH_Z8_IRQ_H #define __ARCH_Z8_IRQ_H /**************************************************************************** * Included Files ****************************************************************************/ #ifndef __ASSEMBLY__ # include #endif /**************************************************************************** * Definitions ****************************************************************************/ /* This is similar configuration information that is contained in ez8.h. * However, this file must be include-able by assembly language files and, * hence, cannot include ez8.h. The logic is fragmentary at present. */ #ifndef ENCORE_VECTORS # if defined(_Z8ENCORE_F642X) || defined(_Z8ENCORE_64K_SERIES) # define ENCORE_VECTORS 1 # endif # if defined(_Z8ENCORE_F640X) || defined(_Z8ENCORE_640_FAMILY) # define ENCORE_VECTORS 1 # endif # if defined(_Z8ENCORE_F08X) || defined(_Z8ENCORE_8K_SERIES) # define ENCORE_VECTORS 1 # endif # if defined(_Z8ENCORE_4K_SERIES) # define ENCORE_VECTORS 1 # endif #endif /* ez8 Interrupt Numbers ****************************************************/ #if defined(ENCORE_VECTORS) # define Z8_WDT_IRQ 0 # define Z8_TRAP_IRQ 1 # define Z8_TIMER2_IRQ 2 /* Only if EZ8_TIMER3 defined */ # define Z8_TIMER1_IRQ 3 # define Z8_TIMER0_IRQ 4 # define Z8_UART0_RX_IRQ 5 /* Only if EZ8_UART0 defined */ # define Z8_UART0_TX_IRQ 6 /* Only if EZ8_UART0 defined */ # define Z8_I2C_IRQ 7 /* Only if EZ8_I2C defined */ # define Z8_SPI_IRQ 8 /* Only if EZ8_SPI defined */ # define Z8_ADC_IRQ 9 /* Only if EZ8_ADC defined */ # define Z8_P7AD_IRQ 10 # define Z8_P6AD_IRQ 11 # define Z8_P5AD_IRQ 12 # define Z8_P4AD_IRQ 13 # define Z8_P3AD_IRQ 14 # define Z8_P2AD_IRQ 15 # define Z8_P1AD_IRQ 16 # define Z8_P0AD_IRQ 17 # define Z8_TIMER3_IRQ 18 /* Only if EZ8_TIMER4 defined */ # define Z8_UART1_RX_IRQ 19 /* Only if EZ8_UART1 defined */ # define Z8_UART1_TX_IRQ 20 /* Only if EZ8_UART1 defined */ # define Z8_DMA_IRQ 21 /* Only if EZ8_DMA defined */ # define Z8_C3_IRQ 22 /* Only if EZ8_PORT1 defined */ # define Z8_C2_IRQ 23 /* Only if EZ8_PORT1 defined */ # define Z8_C1_IRQ 24 /* Only if EZ8_PORT1 defined */ # define Z8_C0_IRQ 25 /* Only if EZ8_PORT1 defined */ # define NR_IRQS (26) #elif defined(ENCORE_XP_VECTORS) # define Z8_WDT_IRQ 0 # define Z8_TRAP_IRQ 1 # define Z8_TIMER2_IRQ 2 /* Only if EZ8_TIMER3 defined */ # define Z8_TIMER1_IRQ 3 # define Z8_TIMER0_IRQ 4 # define Z8_UART0_RX_IRQ 5 /* Only if EZ8_UART0 defined */ # define Z8_UART0_TX_IRQ 6 /* Only if EZ8_UART0 defined */ # define Z8_I2C_IRQ 7 /* Only if EZ8_I2C defined */ # define Z8_SPI_IRQ 8 /* Only if EZ8_SPI defined */ # define Z8_ADC_IRQ 9 /* Only if EZ8_ADC or EZ8_ADC_NEW defined */ # define Z8_P7AD_IRQ 10 # define Z8_P6AD_IRQ 11 # define Z8_P5AD_IRQ 12 # define Z8_P4AD_IRQ 13 # define Z8_P3AD_IRQ 14 # define Z8_P2AD_IRQ 15 # define Z8_P1AD_IRQ 16 # define Z8_P0AD_IRQ 17 # define Z8_TIMER3_IRQ 18 /* Only if EZ8_TIMER4 defined */ # define Z8_UART1_RX_IRQ 19 /* Only if EZ8_UART1 defined */ # define Z8_UART1_TX_IRQ 20 /* Only if EZ8_UART1 defined */ # define Z8_DMA_IRQ 21 /* Only if EZ8_DMA defined */ # define Z8_C3_IRQ 22 /* Only if EZ8_PORT1 defined */ # define Z8_C2_IRQ 23 /* Only if EZ8_PORT1 defined */ # define Z8_C1_IRQ 24 /* Only if EZ8_PORT1 defined */ # define Z8_C0_IRQ 25 /* Only if EZ8_PORT1 defined */ # define Z8_POTRAP_IRQ 27 # define Z8_WOTRAP_IRQ 28 # define NR_IRQS (29) #elif defined(ENCORE_XP16K_VECTORS) # define Z8_WDT_IRQ 0 # define Z8_TRAP_IRQ 1 # define Z8_TIMER2_IRQ 2 /* Only if EZ8_TIMER3 defined */ # define Z8_TIMER1_IRQ 3 # define Z8_TIMER0_IRQ 4 # define Z8_UART0_RX_IRQ 5 /* Only if EZ8_UART0 defined */ # define Z8_UART0_TX_IRQ 6 /* Only if EZ8_UART0 defined */ # define Z8_I2C_IRQ 7 /* Only if EZ8_I2C defined */ # define Z8_SPI_IRQ 8 /* Only if EZ8_ESPI defined */ # define Z8_ADC_IRQ 9 /* Only if EZ8_ADC_NEW defined */ # define Z8_P7AD_IRQ 10 # define Z8_P6AD_IRQ 11 # define Z8_P5AD_IRQ 12 # define Z8_P4AD_IRQ 13 # define Z8_P3AD_IRQ 14 # define Z8_P2AD_IRQ 15 # define Z8_P1AD_IRQ 16 # define Z8_P0AD_IRQ 17 # define Z8_MCT_IRQ 19 /* Only if EZ8_MCT defined */ # define Z8_UART1_RX_IRQ 20 /* Only if EZ8_UART1 defined */ # define Z8_UART1_TX_IRQ 21 /* Only if EZ8_UART1 defined */ # define Z8_C3_IRQ 22 # define Z8_C2_IRQ 23 # define Z8_C1_IRQ 24 # define Z8_C0_IRQ 25 # define Z8_POTRAP_IRQ 27 # define Z8_WOTRAP_IRQ 28 # define NR_IRQS (29) #elif defined(ENCORE_MC_VECTORS) # define Z8_WDT_IRQ 0 # define Z8_TRAP_IRQ 1 # define Z8_PWMTIMER_IRQ 2 # define Z8_PWMFAULT_IRQ 3 # define Z8_ADC_IRQ 4 /* Only if EZ8_ADC_NEW defined */ # define Z8_CMP_IRQ 5 # define Z8_TIMER0_IRQ 6 # define Z8_UART0_RX_IRQ 7 /* Only if EZ8_UART0 defined */ # define Z8_UART0_TX_IRQ 8 /* Only if EZ8_UART0 defined */ # define Z8_SPI_IRQ 9 /* Only if EZ8_SPI defined */ # define Z8_I2C_IRQ 10 /* Only if EZ8_I2C defined */ # define Z8_C0_IRQ 12 # define Z8_PB_IRQ 13 # define Z8_P7AP3A_IRQ 14 # define Z8_P6AP2A_IRQ 15 # define Z8_P5AP1A_IRQ 16 # define Z8_P4AP0A_IRQ 17 # define Z8_POTRAP_IRQ 27 # define Z8_WOTRAP_IRQ 28 # define NR_IRQS (29) #endif #define Z8_IRQ_SYSTIMER Z8_TIMER0_IRQ /* IRQ Management Macros ****************************************************/ /* These macros map IRQ numbers to IRQ registers and bits. * WARNING: These have only been verified for the Z8F640X family! */ #ifdef ENCORE_VECTORS # define Z8_IRQ0_MIN Z8_TIMER2_IRQ # define Z8_IRQ0_BIT(irq) (1 << (Z8_ADC_IRQ - (irq))) # define Z8_IRQ0_MAX Z8_ADC_IRQ # define Z8_IRQ1_MIN Z8_P7AD_IRQ # define Z8_IRQ1_BIT(irq) (1 << (Z8_P0AD_IRQ - (irq))) # define Z8_IRQ1_MAX Z8_P0AD_IRQ # define Z8_IRQ2_MIN Z8_TIMER3_IRQ # define Z8_IRQ2_BIT(irq) (1 << (Z8_C0_IRQ - (irq))) # define Z8_IRQ2_MAX Z8_C0_IRQ #else # error "Add IRQ support for Z8F family" #endif /* IRQ State Save Format **************************************************** * * These indices describe how the ez8 context is save in the state save array * * Byte offsets: */ #define XCPT8_R0 (0) /* Offset 0-15: R0-R15 */ #define XCPT8_R1 (1) #define XCPT8_R2 (2) #define XCPT8_R3 (3) #define XCPT8_R4 (4) #define XCPT8_R5 (5) #define XCPT8_R6 (6) #define XCPT8_R7 (7) #define XCPT8_R8 (8) #define XCPT8_R9 (9) #define XCPT8_R10 (10) #define XCPT8_R11 (11) #define XCPT8_R12 (12) #define XCPT8_R13 (13) #define XCPT8_R14 (14) #define XCPT8_R15 (15) #define XCPT8_SPH (16) /* Offset 16: SP[8:15] */ #define XCPT8_SPL (17) /* Offset 17: SP[0:7] */ #define XCPT8_RP (18) /* Offset 18: Register pointer */ #define XCPT8_FLAGS (19) /* Offset 19: FLAGS */ #define XCPT8_PCH (20) /* Offset 20: PC[8:15] */ #define XCPT8_PCL (21) /* Offset 21: PC[0:7] */ /* 16-bit "word" offsets */ #define XCPT_RR0 (0) /* Indices 0-7: RR0-RR14 */ #define XCPT_RR2 (1) #define XCPT_RR4 (2) #define XCPT_RR6 (3) #define XCPT_RR8 (4) #define XCPT_RR10 (5) #define XCPT_RR12 (6) #define XCPT_RR14 (7) #define XCPT_IRQCTL (8) /* Index 8: IRQCTL register */ #define XCPT_SP (9) /* Index 9: SP[8:15] */ #define XCPT_RPFLAGS (10) /* Index 10: RP (MS) and FLAGS (LS) */ #define XCPT_PC (11) /* Index 11: PC[8:15] */ #define XCPTCONTEXT_REGS (12) /* Byte offsets: */ #define XCPT_R0_OFFS (2*XCPT_RR0) /* Offset 0-15: R0-R15 */ #define XCPT_R1_OFFS (2*XCPT_RR0+1) #define XCPT_R2_OFFS (2*XCPT_RR2) #define XCPT_R3_OFFS (2*XCPT_RR2+1) #define XCPT_R4_OFFS (2*XCPT_RR4) #define XCPT_R5_OFFS (2*XCPT_RR4+1) #define XCPT_R6_OFFS (2*XCPT_RR6) #define XCPT_R7_OFFS (2*XCPT_RR6+1) #define XCPT_R8_OFFS (2*XCPT_RR8) #define XCPT_R9_OFFS (2*XCPT_RR8+1) #define XCPT_R10_OFFS (2*XCPT_RR10) #define XCPT_R11_OFFS (2*XCPT_RR10+1) #define XCPT_R12_OFFS (2*XCPT_RR12) #define XCPT_R13_OFFS (2*XCPT_RR12+1) #define XCPT_R14_OFFS (2*XCPT_RR14) #define XCPT_R15_OFFS (2*XCPT_RR14+1) #define XCPT_UNUSED_OFFS (2*XCPT_IRQCTL) /* Offset 16: Unused (zero) */ #define XCPT_IRQCTL_OFFS (2*XCPT_IRQCTL+1) /* offset 17: IRQCTL register */ #define XCPT_SPH_OFFS (2*XCPT_SP) /* Offset 18: SP[8:15] */ #define XCPT_SPL_OFFS (2*XCPT_SP+1) /* Offset 19: SP[0:7] */ #define XCPT_RP_OFFS (2*XCPT_RPFLAGS) /* Offset 20: Register pointer */ #define XCPT_FLAGS_OFFS (2*XCPT_RPFLAGS+1) /* Offset 21: FLAGS */ #define XCPT_PCH_OFFS (2*XCPT_PC) /* Offset 22: PC[8:15] */ #define XCPT_PCL_OFFS (2*XCPT_PC+1) /* Offset 23: PC[0:7] */ #define XCPTCONTEXT_SIZE (2*XCPTCONTEXT_REGS) /**************************************************************************** * Public Types ****************************************************************************/ #ifndef __ASSEMBLY__ /* This is the type of the register save array */ typedef uint16_t chipreg_t; /* This struct defines the way the registers are stored. */ struct xcptcontext { /* Register save area */ chipreg_t regs[XCPTCONTEXT_REGS]; /* The following function pointer is non-zero if there * are pending signals to be processed. */ #ifndef CONFIG_DISABLE_SIGNALS CODE void *sigdeliver; /* Actual type is sig_deliver_t */ /* The following retains that state during signal execution */ uint16_t saved_pc; /* Saved return address */ uint16_t saved_irqctl; /* Saved interrupt state */ #endif }; #endif /**************************************************************************** * Inline functions ****************************************************************************/ /**************************************************************************** * Public Variables ****************************************************************************/ /**************************************************************************** * Public Function Prototypes ****************************************************************************/ #ifndef __ASSEMBLY__ #ifdef __cplusplus #define EXTERN extern "C" extern "C" { #else #define EXTERN extern #endif EXTERN irqstate_t irqsave(void); EXTERN void irqrestore(irqstate_t flags); #undef EXTERN #ifdef __cplusplus } #endif #endif #endif /* __ARCH_Z8_IRQ_H */