/************************************************************************************ * arch/z80/src/ez80/ez80f91.h * arch/z80/src/chip/ez80f91.h * * Copyright (C) 2008, 2009 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ************************************************************************************/ #ifndef __ARCH_Z80_SRC_EZ80_EZ80F91_H #define __ARCH_Z80_SRC_EZ80_EZ80F91_H /************************************************************************************ * Included Files ************************************************************************************/ #include "ez80f91_emac.h" /************************************************************************************ * Definitions ************************************************************************************/ /* Memory map ***********************************************************************/ #define EZ80_ONCHIPFLASH 0x000000 /* CS0: 256Kb of on-chip flash */ #define EZ80_OFFCHIPCS0 0x400000 /* CS0: Off chip use (usually flash) */ #define EZ80_OFFCHIPCS2 0x800000 /* CS2: Off chip use (e.g. memory mapped I/O) */ #define EZ80_OFFCHIPCS1 0xc00000 /* CS1: Off chip use (usually SRAM) */ #define EZ80_EMACSRAM 0xffc000 /* On-chip EMAC SRAM (8Kb) on reset*/ #define EZ80_ONCHIPSRAM 0xffe000 /* On-chip SRAM (8Kb) on reset */ /* Product ID Registers ************************************************************/ #define EZ80_ZDI_ID_L 0x00 #define EZ80_ZDI_ID_H 0x01 #define EZ80_ZDI_ID_REV 0x02 /* Interrupt Registers *************************************************************/ #define EZ80_INT_P0 0x10 #define EZ80_INT_P1 0x11 #define EZ80_INT_P2 0x12 #define EZ80_INT_P3 0x13 #define EZ80_INT_P4 0x14 #define EZ80_INT_P5 0x15 /* EMACC Registers *****************************************************************/ #define EZ80_EMAC_TEST 0x20 /* EMAC test register */ #define EZ80_EMAC_CFG1 0x21 /* EMAC configuration 1 register */ #define EZ80_EMAC_CFG2 0x22 /* EMAC configuration 2 register */ #define EZ80_EMAC_CFG3 0x23 /* EMAC configuration 3 register */ #define EZ80_EMAC_CFG4 0x24 /* EMAC configuration 4 register */ #define EZ80_EMAC_STAD_0 0x25 /* EMAC station address register 0 */ #define EZ80_EMAC_STAD_1 0x26 /* EMAC station address register 1 */ #define EZ80_EMAC_STAD_2 0x27 /* EMAC station address register 2 */ #define EZ80_EMAC_STAD_3 0x28 /* EMAC station address register 3 */ #define EZ80_EMAC_STAD_4 0x29 /* EMAC station address register 4 */ #define EZ80_EMAC_STAD_5 0x2a /* EMAC station address register 5 */ #define EZ80_EMAC_TPTV_L 0x2b /* Transit pause timer value (low) */ #define EZ80_EMAC_TPTV_H 0x2c /* Transit pause timer value (high) */ #define EZ80_EMAC_IPGT 0x2d /* EMAC Interpacket gap register */ #define EZ80_EMAC_IPGR1 0x2e /* Non-back-to-back IPG register 1 */ #define EZ80_EMAC_IPGR2 0x2f /* Non-back-to-back IPG register 2 */ #define EZ80_EMAC_MAXF_L 0x30 /* EMAC maximum frame length register (low) */ #define EZ80_EMAC_MAXF_H 0x31 /* EMAC maximum frame length register (high) */ #define EZ80_EMAC_AFR 0x32 /* EMAC address filter register */ #define EZ80_EMAC_HTBL_0 0x33 /* EMAC hash table register 0 */ #define EZ80_EMAC_HTBL_1 0x34 /* EMAC hash table register 1 */ #define EZ80_EMAC_HTBL_2 0x35 /* EMAC hash table register 2 */ #define EZ80_EMAC_HTBL_3 0x36 /* EMAC hash table register 3 */ #define EZ80_EMAC_HTBL_4 0x37 /* EMAC hash table register 4 */ #define EZ80_EMAC_HTBL_5 0x38 /* EMAC hash table register 5 */ #define EZ80_EMAC_HTBL_6 0x39 /* EMAC hash table register 6 */ #define EZ80_EMAC_HTBL_7 0x3a /* EMAC hash table register 7 */ #define EZ80_EMAC_MIIMGT 0x3b /* EMACS MII management register */ #define EZ80_EMAC_CTLD_L 0x3c /* PHY configuration data register (low) */ #define EZ80_EMAC_CTLD_H 0x3d /* PHY configuration data register (high) */ #define EZ80_EMAC_RGAD 0x3e /* PHY address register */ #define EZ80_EMAC_FIAD 0x3f /* PHY unit select register */ #define EZ80_EMAC_PTMR 0x40 /* EMAC transmit polling timer register */ #define EZ80_EMAC_RST 0x41 /* EMAC reset control register */ #define EZ80_EMAC_TLBP_L 0x42 /* EMAC transmit lower boundary pointer (low) */ #define EZ80_EMAC_TLBP_H 0x43 /* EMAC transmit lower boundary pointer (high) */ #define EZ80_EMAC_BP_L 0x44 /* EMAC boundary pointer register (low) */ #define EZ80_EMAC_BP_H 0x45 /* EMAC boundary pointer register (high) */ #define EZ80_EMAC_BP_U 0x46 /* EMAC boundary pointer register (upper byte) */ #define EZ80_EMAC_RHBP_L 0x47 /* EMAC receive high boundary pointer register (low) */ #define EZ80_EMAC_RHBP_H 0x48 /* EMAC receive high boundary pointer register (high) */ #define EZ80_EMAC_RRP_L 0x49 /* EMAC receive read pointer (low) */ #define EZ80_EMAC_RRP_H 0x4a /* EMAC receive read pointer (high) */ #define EZ80_EMAC_BUFSZ 0x4b /* EMAC buffer size register */ #define EZ80_EMAC_IEN 0x4c /* EMAC interrupt enable register */ #define EZ80_EMAC_ISTAT 0x4d /* EMAC interrupt status register */ #define EZ80_EMAC_PRSD_L 0x4e /* PHY read status data register (low) */ #define EZ80_EMAC_PRSD_H 0x4f /* PHY read status data register (high) */ #define EZ80_EMAC_MIISTAT 0x50 /* EMAC MII status register */ #define EZ80_EMAC_RWP_L 0x51 /* EMAC receive write pointer (low) */ #define EZ80_EMAC_RWP_H 0x52 /* EMAC receive write pointer (high) */ #define EZ80_EMAC_TRP_L 0x53 /* EMAC transmit read pointer (low) */ #define EZ80_EMAC_TRP_H 0x54 /* EMAC transmit read pointer (high) */ #define EZ80_EMAC_BLKSLFT_L 0x55 /* EMAC receive blocks left register (low) */ #define EZ80_EMAC_BLKSLFT_H 0x56 /* EMAC receive blocks left register (high) */ #define EZ80_EMAC_FDATA_L 0x57 /* EMAC FIFO data register (low) */ #define EZ80_EMAC_FDATA_H 0x58 /* EMAC FIFO data register (high) */ #define EZ80_EMAC_FFLAGS 0x59 /* EMAC FIFO flags register */ /* PLL Registers *******************************************************************/ #define EZ80_PLL_DIV_L 0x5c #define EZ80_PLL_DIV_H 0x5d #define EZ80_PLL_CTL0 0x5e #define EZ80_PLL_CTL1 0x5f /* Timer Registers *****************************************************************/ #define EZ80_TMR0_CTL 0x60 /* RW: Timer 0 control register */ #define EZ80_TMR0_IER 0x61 /* RW: Timer 0 interrupt enable register */ #define EZ80_TMR0_IIR 0x62 /* R : Timer 0 interrupt ID register */ #define EZ80_TMR0_DRL 0x63 /* R : Timer 0 data register (low) */ #define EZ80_TMR0_DRH 0x64 /* R : Timer 0 data register (high) */ #define EZ80_TMR0_RRL 0x63 /* W: Timer 0 reload register (low) */ #define EZ80_TMR0_RRH 0x64 /* W: Timer 0 reload register (high) */ #define EZ80_TMR1_CTL 0x65 /* RW: Timer 1 control register */ #define EZ80_TMR1_IER 0x66 /* RW: Timer 1 interrupt enable register */ #define EZ80_TMR1_IIR 0x67 /* R : Timer 1 interrupt ID register */ #define EZ80_TMR1_DRL 0x68 /* R : Timer 1 data register (low) */ #define EZ80_TMR1_DRH 0x69 /* R : Timer 1 data register (high) */ #define EZ80_TMR1_RRL 0x68 /* W: Timer 1 reload register (low) */ #define EZ80_TMR1_RRH 0x69 /* W: Timer 1 reload register (high) */ #define EZ80_TMR1_CAPCTL 0x6a /* RW: Timer 1 input capture control register */ #define EZ80_TMR1_CAPAL 0x6b /* R : Timer 1 capture input value A (low) */ #define EZ80_TMR1_CAPAH 0x6c /* R : Timer 1 capture input value A (high) */ #define EZ80_TMR1_CAPBL 0x6d /* R : Timer 1 capture input value B (low) */ #define EZ80_TMR1_CAPBH 0x6e #define EZ80_TMR2_CTL 0x6f /* RW: Timer 2 control register */ #define EZ80_TMR2_IER 0x70 /* RW: Timer 2 interrupt enable register */ #define EZ80_TMR2_IIR 0x71 /* R : Timer 2 interrupt ID register */ #define EZ80_TMR2_DRL 0x72 /* R : Timer 2 data register (low) */ #define EZ80_TMR2_DRH 0x73 /* R : Timer 2 data register (high) */ #define EZ80_TMR2_RRL 0x72 /* W: Timer 2 reload register (low) */ #define EZ80_TMR2_RRH 0x73 /* W: Timer 2 reload register (high) */ #define EZ80_TMR3_CTL 0x74 /* RW: Timer 3 control register */ #define EZ80_TMR3_IER 0x75 /* RW: Timer 3 interrupt enable register */ #define EZ80_TMR3_IIR 0x76 /* R : Timer 3 interrupt ID register */ #define EZ80_TMR3_DRL 0x77 /* R : Timer 3 data register (low) */ #define EZ80_TMR3_DRH 0x78 /* R : Timer 3 data register (high) */ #define EZ80_TMR3_RRL 0x77 /* W: Timer 3 reload register (low) */ #define EZ80_TMR3_RRH 0x78 /* W: Timer 3 reload register (high) */ #define EZ80_TMR3_CAPCTL 0x7b /* RW: Timer 3 input capture control register */ #define EZ80_TMR3_CAPAL 0x7c /* R : Timer 3 capture input value A (low) */ #define EZ80_TMR3_CAPAH 0x7d /* R : Timer 3 capture input value A (high) */ #define EZ80_TMR3_CAPBL 0x7e /* R : Timer 3 capture input value B (low) */ #define EZ80_TMR3_CAPBH 0x7f /* R : Timer 3 capture input value B (high) */ #define EZ80_TMR3_OCCTL1 0x80 /* RW: Timer 3 output compare control register1 */ #define EZ80_TMR3_OCCTL2 0x81 /* RW: Timer 3 output compare control register2 */ #define EZ80_TMR3_OC0L 0x82 /* RW: Timer 3 output compare value 0 (low) */ #define EZ80_TMR3_OC0H 0x83 /* RW: Timer 3 output compare value 0 (high) */ #define EZ80_TMR3_OC1L 0x84 /* RW: Timer 3 output compare value 1 (low) */ #define EZ80_TMR3_OC1H 0x85 /* RW: Timer 3 output compare value 1 (high) */ #define EZ80_TMR3_OC2L 0x86 /* RW: Timer 3 output compare value 2 (low) */ #define EZ80_TMR3_OC2H 0x87 /* RW: Timer 3 output compare value 2 (high) */ #define EZ80_TMR3_OC3L 0x88 /* RW: Timer 3 output compare value 3 (low) */ #define EZ80_TMR3_OC3H 0x89 /* RW: Timer 3 output compare value 3 (high) */ /* TMR0/1/2/3 CTL Register Bit Definitions *******************************************/ #define EZ80_TMRCTL_BRKSTOP 0x80 /* Bit 7: Stop timer for debug operation */ #define EZ80_TMRCTL_CLKSEL 0x60 /* Bits 6-5: Timer source */ # define EZ80_TMRCLKSEL_SYSCLK 0x00 /* 00: System clock divided by prescaler */ # define EZ80_TMRCLKSEL_RTC 0x20 /* 01: Real time clock input */ # define EZ80_TMRCLKSEL_ECF 0x40 /* 10: Event count input, falling edge */ # define EZ80_TMRCLKSEL_ECR 0x60 /* 11: Event count input, rising edge */ #define EZ80_TMRCTL_CLKDIV 0x18 /* Bits 3-4: Sysem clock divider */ # define EZ80_TMRCLKDIV_4 0x00 /* 00: 4 */ # define EZ80_TMRCLKDIV_16 0x08 /* 01: 16 */ # define EZ80_TMRCLKDIV_64 0x10 /* 10: 64 */ # define EZ80_TMRCLKDIV_256 0x18 /* 11: 256 */ #define EZ80_TMRCTL_TIMCONT 0x04 /* Bit 2: Continuous mode */ #define EZ80_TMRCTL_RLD 0x02 /* Bit 1: Force reload */ #define EZ80_TMRCTL_TIMEN 0x01 /* Bit 0: Programmable reload timer enabled */ /* TMR0/1/2/3 IER Register Bit Definitions *******************************************/ /* Bit 7: Reserved */ #define EZ80_TMRIER_OC3EN 0x40 /* Bit 6: TMR3 OC3 enabled */ #define EZ80_TMRIER_OC2EN 0x20 /* Bit 5: TMR3 OC2 enabled */ #define EZ80_TMRIER_OC1EN 0x10 /* Bit 4: TMR3 OC1 enabled */ #define EZ80_TMRIER_OC0EN 0x08 /* Bit 3: TMR3 OC0 enabled */ #define EZ80_TMRIER_ICBEN 0x04 /* Bit 2: TMR1/3 capture pin enabled */ #define EZ80_TMRIER_ICAEN 0x02 /* Bit 1: TMR1/3 capture pin enabled */ #define EZ80_TMRIER_EOCEN 0x01 /* Bit 0: End of count interrupt enabled */ /* TMR0/1/2/3 IER Register Bit Definitions *******************************************/ /* Bit 7: Reserved */ #define EZ80_TMRIIR_OC3 0x40 /* Bit 6: TMR3 OC3 */ #define EZ80_TMRIIR_OC2 0x20 /* Bit 5: TMR3 OC2 */ #define EZ80_TMRIIR_OC1 0x10 /* Bit 4: TMR3 OC1 */ #define EZ80_TMRIIR_OC0 0x08 /* Bit 3: TMR3 OC0 */ #define EZ80_TMRIIR_ICB 0x04 /* Bit 2: TMR1/3 capture pin */ #define EZ80_TMRIIR_ICA 0x02 /* Bit 1: TMR1/3 capture pin */ #define EZ80_TMRIIR_EOC 0x01 /* Bit 0: End of count interrupt */ /* PWM Registers *********************************************************************/ #define EZ80_PWM_CTL1 0x79 #define EZ80_PWM_CTL2 0x7a #define EZ80_PWM_CTL3 0x7b #define EZ80_PWM0R_L 0x7c #define EZ80_PWM0R_H 0x7d #define EZ80_PWM1R_L 0x7e #define EZ80_PWM1R_H 0x7f #define EZ80_PWM2R_L 0x80 #define EZ80_PWM2R_H 0x81 #define EZ80_PWM3R_L 0x82 #define EZ80_PWM3R_H 0x83 #define EZ80_PWM0F_L 0x84 #define EZ80_PWM0F_H 0x85 #define EZ80_PWM1F_L 0x86 #define EZ80_PWM1F_H 0x87 #define EZ80_PWM2F_L 0x88 #define EZ80_PWM2F_H 0x89 #define EZ80_PWM3F_L 0x8a #define EZ80_PWM3F_H 0x8b /* WDT Registers *********************************************************************/ #define EZ80_WDT_CTL 0x93 #define EZ80_WDT_RR 0x94 /* GPIO Registers ********************************************************************/ #define EZ80_PA_DR 0x96 #define EZ80_PA_DDR 0x97 #define EZ80_PA_ALT0 0xa6 #define EZ80_PA_ALT1 0x98 #define EZ80_PA_ALT2 0x99 #define EZ80_PB_DR 0x9a #define EZ80_PB_DDR 0x9b #define EZ80_PB_ALT0 0xa7 #define EZ80_PB_ALT1 0x9c #define EZ80_PB_ALT2 0x9d #define EZ80_PC_DR 0x9e #define EZ80_PC_DDR 0x9f #define EZ80_PC_ALT0 0xce #define EZ80_PC_ALT1 0xa0 #define EZ80_PC_ALT2 0xa1 #define EZ80_PD_DR 0xa2 #define EZ80_PD_DDR 0xa3 #define EZ80_PD_ALT0 0xcf #define EZ80_PD_ALT1 0xa4 #define EZ80_PD_ALT2 0xa5 /* CS Registers **********************************************************************/ #define EZ80_CS0_LBR 0xa8 #define EZ80_CS0_UBR 0xa9 #define EZ80_CS0_CTL 0xaa #define EZ80_CS1_LBR 0xab #define EZ80_CS1_UBR 0xac #define EZ80_CS1_CTL 0xad #define EZ80_CS2_LBR 0xae #define EZ80_CS2_UBR 0xaf #define EZ80_CS2_CTL 0xb0 #define EZ80_CS3_LBR 0xb1 #define EZ80_CS3_UBR 0xb2 #define EZ80_CS3_CTL 0xb3 /* RAMCTL reggisters *****************************************************************/ #define EZ80_RAM_CTL 0xb4 #define EZ80_RAM_CTL0 0xb4 #define EZ80_RAM_ADDR_U 0xb5 #define EZ80_MBIST_GPR 0xb6 #define EZ80_MBIST_EMR 0xb7 /* RAMCTL bit definitions ************************************************************/ #define RAMCTL_ERAMEN (1 << 6) /* Bit 7: 1=On chip EMAC SRAM is enabled */ #define RAMCTL_GPRAMEN (1 << 7) /* Bit 7: 1=On chip GP SRAM is enabled */ /* SPI Registers *********************************************************************/ #define EZ80_SPI_BRG_L 0xb8 #define EZ80_SPI_BRG_H 0xb9 #define EZ80_SPI_CTL 0xba #define EZ80_SPI_SR 0xbb #define EZ80_SPI_RBR 0xbc #define EZ80_SPI_TSR 0xbd /* UART Register Offsets *************************************************************/ /* DLAB=0: */ #define EZ80_UART_THR 0x00 /* W: UART Transmit holding register */ #define EZ80_UART_RBR 0x00 /* R : UART Receive buffer register */ #define EZ80_UART_IER 0x01 /* RW: UART Interrupt enable register */ /* DLAB=1: */ #define EZ80_UART_BRG 0x00 /* RW: UART Baud rate generator register */ #define EZ80_UART_BRGL 0x00 /* RW: UART Baud rate generator register (low) */ #define EZ80_UART_BRGH 0x01 /* RW: UART Baud rate generator register (high) */ /* DLAB=N/A: */ #define EZ80_UART_IIR 0x02 /* R : UART Interrupt identification register */ #define EZ80_UART_FCTL 0x02 /* W: UART FIFO control register */ #define EZ80_UART_LCTL 0x03 /* RW: UART Line control register */ #define EZ80_UART_MCTL 0x04 /* RW: UART Modem control register */ #define EZ80_UART_LSR 0x05 /* R : UART Line status register */ #define EZ80_UART_MSR 0x06 /* R : UART Modem status register */ #define EZ80_UART_SPR 0x07 /* RW: UART Scratchpad register */ /* UART0/1 Base Register Addresses **************************************************/ #define EZ80_UART0_BASE 0xc0 #define EZ80_UART1_BASE 0xd0 /* UART0/1 IER register bits ********************************************************/ #define EZ80_UARTEIR_INTMASK 0x1f /* Bits 5-7: Reserved */ #define EZ80_UARTEIR_TCIE 0x10 /* Bit 4: Transmission complete interrupt */ #define EZ80_UARTEIR_MIIE 0x08 /* Bit 3: Modem status input interrupt */ #define EZ80_UARTEIR_LSIE 0x04 /* Bit 2: Line status interrupt */ #define EZ80_UARTEIR_TIE 0x02 /* Bit 1: Transmit interrupt */ #define EZ80_UARTEIR_RIE 0x01 /* Bit 0: Receive interrupt */ /* UART0/1 IIR register bits ********************************************************/ #define EZ80_UARTIIR_FSTS 0x80 /* Bit 7: FIFO enable */ /* Bits 4-6: Reserved */ #define EZ80_UARTIIR_INSTS 0x0e /* Bits 1-3: Interrupt status code */ # define EZ80_UARTINSTS_CTO 0x0c /* 110: Character timeout */ # define EZ80_UARTINSTS_TC 0x0a /* 101: Transmission complete */ # define EZ80_UARTINSTS_RLS 0x06 /* 011: Receiver line status */ # define EZ80_UARTINSTS_RDR 0x04 /* 010: Receive data ready or trigger level */ # define EZ80_UARTINSTS_TBE 0x02 /* 001: Transmisson buffer empty */ # define EZ80_UARTINSTS_MS 0x00 /* 000: Modem status */ #define EZ80_UARTIIR_INTBIT 0x01 /* Bit 0: Active interrupt source */ #define EZ80_UARTIIR_CAUSEMASK 0x0f /* UART0/1 FCTL register bits *******************************************************/ #define EZ80_UARTFCTL_TRIG 0xc0 /* Bits 6-7: UART recieve FIFO trigger level */ # define EZ80_UARTTRIG_1 0x00 /* 00: Receive FIFO trigger level=1 */ # define EZ80_UARTTRIG_4 0x40 /* 01: Receive FIFO trigger level=4 */ # define EZ80_UARTTRIG_8 0x80 /* 10: Receive FIFO trigger level=8 */ # define EZ80_UARTTRIG_14 0xc0 /* 11: Receive FIFO trigger level=14 */ /* Bit 3-5: Reserved */ #define EZ80_UARTFCTL_CLRTxF 0x04 /* Bit 2: Transmit enable */ #define EZ80_UARTFCTL_CLRRxF 0x02 /* Bit 1: Receive enable */ #define EZ80_UARTFCTL_FIFOEN 0x01 /* Bit 0: Enable receive/transmit FIFOs */ /* UART0/1 LCTL register bits *******************************************************/ #define EZ80_UARTLCTL_DLAB 0x80 /* Bit 7: Enable access to baud rate generator */ #define EZ80_UARTLCTL_SB 0x40 /* Bit 6: Send break */ #define EZ80_UARTLCTL_FPE 0x20 /* Bit 5: Force parity error */ #define EZ80_UARTLCTL_EPS 0x10 /* Bit 4: Even parity select */ #define EZ80_UARTLCTL_PEN 0x08 /* Bit 3: Parity enable */ #define EZ80_UARTLCTL_2STOP 0x04 /* Bit 2: 2 stop bits */ #define EZ80_UARTLCTL_CHAR 0x03 /* Bits 0-2: Number of data bits */ # define EZ80_UARTCHAR_5BITS 0x00 /* 00: 5 data bits */ # define EZ80_UARTCHAR_6BITS 0x01 /* 01: 6 data bits */ # define EZ80_UARTCHAR_7BITS 0x02 /* 10: 7 data bits */ # define EZ80_UARTCHAR_8BITS 0x03 /* 11: 8 data bits */ #define EZ80_UARTLCTL_MASK 0x3f /* UART0/1 MCTL register bits *******************************************************/ /* Bit 7: Reserved */ #define EZ80_UARTMCTL_POLARITY 0x40 /* Bit 6: Invert polarity of RxD and TxD */ #define EZ80_UARTMCTL_MDM 0x20 /* Bit 5: Multi-drop mode enable */ #define EZ80_UARTMCTL_LOOP 0x10 /* Bit 4: Loopback mode enable */ #define EZ80_UARTMCTL_OUT2 0x08 /* Bit 3: (loopback mode only) */ #define EZ80_UARTMCTL_OUT1 0x04 /* Bit 2: (loopback mode only) */ #define EZ80_UARTMCTL_RTS 0x02 /* Bit 1: Request to send */ #define EZ80_UARTMCTL_DTR 0x01 /* Bit 0: Data termnal read */ /* UART0/1 LSR register bits ********************************************************/ #define EZ80_UARTLSR_ERR 0x80 /* Bit 7: Error detected in FIFO */ #define EZ80_UARTLSR_TEMT 0x40 /* Bit 6: Transmit FIFO empty and idle */ #define EZ80_UARTLSR_THRE 0x20 /* Bit 5: Transmit FIFO empty */ #define EZ80_UARTLSR_BI 0x10 /* Bit 4: Break on input */ #define EZ80_UARTLSR_FE 0x08 /* Bit 3: Framing error */ #define EZ80_UARTLSR_PE 0x04 /* Bit 2: Parity error */ #define EZ80_UARTLSR_OE 0x02 /* Bit 1: Overrun error */ #define EZ80_UARTLSR_DR 0x01 /* Bit 0: Data ready */ /* UART0/1 MSR register bits ********************************************************/ #define EZ80_UARTMSR_DCD 0x80 /* Bit 7: Data carrier detect */ #define EZ80_UARTMSR_RI 0x40 /* Bit 6: Ring indicator */ #define EZ80_UARTMSR_DSR 0x20 /* Bit 5: Data set ready */ #define EZ80_UARTMSR_CTS 0x10 /* Bit 4: Clear to send */ #define EZ80_UARTMSR_DDCD 0x08 /* Bit 3: Delta on DCD input */ #define EZ80_UARTMSR_TERI 0x04 /* Bit 2: Trailing edge change on RI */ #define EZ80_UARTMSR_DDSR 0x02 /* Bit 1: Delta on DSR input */ #define EZ80_UARTMSR_DCTS 0x01 /* Bit 0: Delta on CTS input */ /* IR Registers ********************************************************************/ #define EZ80_IR_CTL 0xbf /* I2C Registers *******************************************************************/ #define EZ80_I2C_SAR 0xc8 #define EZ80_I2C_XSAR 0xc9 #define EZ80_I2C_DR 0xca #define EZ80_I2C_CTL 0xcb #define EZ80_I2C_SR 0xcc #define EZ80_I2C_CCR 0xcd #define EZ80_I2C_SRR 0xce /* CLK Registers *******************************************************************/ #define EZ80_CLK_PPD1 0xdb #define EZ80_CLK_PPD2 0xdc /* RTC Registers *******************************************************************/ #define EZ80_RTC_SEC 0xe0 #define EZ80_RTC_MIN 0xe1 #define EZ80_RTC_HRS 0xe2 #define EZ80_RTC_DOW 0xe3 #define EZ80_RTC_DOM 0xe4 #define EZ80_RTC_MON 0xe5 #define EZ80_RTC_YR 0xe6 #define EZ80_RTC_CEN 0xe7 #define EZ80_RTC_ASEC 0xe8 #define EZ80_RTC_AMIN 0xe9 #define EZ80_RTC_AHRS 0xea #define EZ80_RTC_ADOW 0xeb #define EZ80_RTC_ACTRL 0xec #define EZ80_RTC_CTRL 0xed /* CSBMC Registers *****************************************************************/ #define EZ80_CS0_BMC 0xf0 #define EZ80_CS1_BMC 0xf1 #define EZ80_CS2_BMC 0xf2 #define EZ80_CS3_BMC 0xf3 /* FLASH Registers *****************************************************************/ #define EZ80_FLASH_KEY 0xf5 #define EZ80_FLASH_DATA 0xf6 #define EZ80_FLASH_ADDR_U 0xf7 #define EZ80_FLASH_CTRL 0xf8 #define EZ80_FLASH_FDIV 0xf9 #define EZ80_FLASH_PROT 0xfa #define EZ80_FLASH_INTC 0xfb #define EZ80_FLASH_PAGE 0xfc #define EZ80_FLASH_ROW 0xfd #define EZ80_FLASH_COL 0xfe #define EZ80_FLASH_PGCTL 0xff /************************************************************************************ * Public Function Prototypes ************************************************************************************/ #ifndef __ASSEMBLY__ #ifdef __cplusplus #define EXTERN extern "C" extern "C" { #else #define EXTERN extern #endif #undef EXTERN #ifdef __cplusplus } #endif #endif #endif /* __ARCH_Z80_SRC_EZ80_EZ80F91_H */