/************************************************************************************
 * configs/hymini-stm32v/src/hymini_stm32v-internal.h
 * arch/arm/src/board/hymini_stm32v-internal.h
 *
 *   Copyright (C) 2009, 2011 Gregory Nutt. All rights reserved.
 *   Author: Gregory Nutt <gnutt@nuttx.org>
 *           Laurent Latil <laurent@latil.nom.fr>
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 * 3. Neither the name NuttX nor the names of its contributors may be
 *    used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 ************************************************************************************/

#ifndef __CONFIGS_HYMINI_STM32V_INTERNAL_H
#define __CONFIGS_HYMINI_STM32V_INTERNAL_H

/************************************************************************************
 * Included Files
 ************************************************************************************/

#include <nuttx/config.h>
#include <nuttx/compiler.h>
#include <stdint.h>

/************************************************************************************
 * Definitions
 ************************************************************************************/

/* How many SPI modules does this chip support? The LM3S6918 supports 2 SPI
 * modules (others may support more -- in such case, the following must be
 * expanded).
 */

#if STM32_NSPI < 1
#  undef CONFIG_STM32_SPI1
#  undef CONFIG_STM32_SPI2
#elif STM32_NSPI < 2
#  undef CONFIG_STM32_SPI2
#endif

/* GPIOs **************************************************************/
/* LEDs */

#define GPIO_LED1       (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|\
                         GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN0)
#define GPIO_LED2       (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|\
                         GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN1)

/* BUTTONS -- NOTE that some have EXTI interrupts configured */

#define MIN_IRQBUTTON   BUTTON_KEYA
#define MAX_IRQBUTTON   BUTTON_KEYB
#define NUM_IRQBUTTONS  NUM_BUTTONS

/* Button A is externally pulled up */
#define GPIO_BTN_KEYA (GPIO_INPUT|GPIO_CNF_INFLOAT|GPIO_MODE_INPUT|\
                         GPIO_PORTC|GPIO_PIN13)

/* Button B is externally pulled dw */
#define GPIO_BTN_KEYB (GPIO_INPUT|GPIO_CNF_INFLOAT|GPIO_MODE_INPUT|\
                         GPIO_PORTB|GPIO_PIN2)

/* SPI touch screen (ADS7843) chip select:  PA.4 */

#define GPIO_TS_CS   (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|\
                         GPIO_OUTPUT_SET|GPIO_PORTA|GPIO_PIN4)

/* Touch screen (ADS7843) IRQ pin:  PB.6 */
#define GPIO_TS_IRQ  (GPIO_INPUT|GPIO_CNF_INPULLUP|GPIO_MODE_INPUT|\
                         GPIO_PORTB|GPIO_PIN6)

/* USB Soft Connect Pullup: PB.7 */
#define GPIO_USB_PULLUP (GPIO_OUTPUT|GPIO_CNF_OUTOD|GPIO_MODE_50MHz|\
                         GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN7)

/* SD card detect pin: PD.3   (line is pulled up on board) */
#define GPIO_SD_CD (GPIO_INPUT|GPIO_CNF_INFLOAT|GPIO_MODE_INPUT|\
                         GPIO_PORTD|GPIO_PIN3)

/************************************************************************************
 * Public Types
 ************************************************************************************/

/************************************************************************************
 * Public data
 ************************************************************************************/

#ifndef __ASSEMBLY__

/************************************************************************************
 * Public Functions
 ************************************************************************************/

/************************************************************************************
 * Name: stm32_spiinitialize
 *
 * Description:
 *   Called to configure SPI chip select GPIO pins for the Hy-Mini STM32v board.
 *
 ************************************************************************************/

extern void weak_function stm32_spiinitialize(void);

/************************************************************************************
 * Name: stm32_usbinitialize
 *
 * Description:
 *   Called to setup USB-related GPIO pins for the Hy-Mini STM32v board.
 *
 ************************************************************************************/

extern void weak_function stm32_usbinitialize(void);

#endif /* __ASSEMBLY__ */
#endif /* __CONFIGS_HYMINI_STM32V_INTERNAL_H */