/***************************************************************************** * configs/sama5d4-ek/src/at25_main.c * * Copyright (C) 2014 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include #include #include #include #include "sama5d4-ek.h" /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ /* Configuration ************************************************************/ #ifndef HAVE_AT25 # error The AT25 Serial FLASH is not available #endif #ifndef CONFIG_SAMA5D4EK_AT25_BLOCKMOUNT # error CONFIG_SAMA5D4EK_AT25_BLOCKMOUNT must be selected #endif #ifndef CONFIG_SAMA5D4EK_AT25_CHARDEV # error CONFIG_SAMA5D4EK_AT25_CHARDEV must be selected #endif #ifdef CONFIG_BOOT_SDRAM_DATA # error CONFIG_BOOT_SDRAM_DATA must NOT be selected #endif #if !defined(CONFIG_SAMA5D4EK_AT25_PROGSIZE) || CONFIG_SAMA5D4EK_AT25_PROGSIZE < 128 # error Large CONFIG_SAMA5D4EK_AT25_PROGSIZE must be selected #endif #define DEVNAME_MAXSIZE 12 #define IOBUFFER_SIZE 512 /**************************************************************************** * Private Types ****************************************************************************/ /**************************************************************************** * Private Data ****************************************************************************/ static uint8_t g_iobuffer[IOBUFFER_SIZE]; static char g_at25dev[DEVNAME_MAXSIZE]; /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: at25_main * * Description: * at25_main is a tiny program that runs in ISRAM. at25_main will * configure DRAM and the AT25 serial FLASH, present a prompt, and load * an Intel HEX file into the AT25 serial FLASH (after first buffering * the binary data into memory). On re-boot, the program loaded into * the AT25 FLASH should then execute. * * On entry: * - SDRAM has already been initialized (we are using it for .bss!) * - SPI0 chip select has already been configured. * ****************************************************************************/ int at25_main(int argc, char *argv) { struct lib_rawinstream_s rawinstream; struct lib_memsostream_s memoutstream; const uint8_t *src; ssize_t nwritten; ssize_t nread; ssize_t remaining; size_t rdsize; int fd; int ret; /* Configure the AT25 as the a character device. */ ret = sam_at25_automount(AT25_MINOR); if (ret < 0) { fprintf(stderr, "ERROR: Failed to mount AT25 FLASH: %d\n", ret); return EXIT_FAILURE; } /* Open the AT25 device for writing */ snprintf(g_at25dev, DEVNAME_MAXSIZE, "/dev/mtd%d", AT25_MINOR); fd = open(g_at25dev, O_WRONLY); if (fd < 0) { int errcode = errno; fprintf(stderr, "ERROR: Failed to open %s: %d\n", g_at25dev, errcode); return EXIT_FAILURE; } /* Wrap stdin as an IN stream that can the HEX data over the serial port */ lib_rawinstream(&rawinstream, 0); /* Define a memory buffer of size CONFIG_SAMA5D4EK_AT25_PROGSIZE at the * beginning of SDRAM. Wrap the memory buffer as a seek-able OUT stream in * which we can buffer the binary data. */ lib_memsostream(&memoutstream, (FAR char *)SAM_DDRCS_VSECTION, CONFIG_SAMA5D4EK_AT25_PROGSIZE); /* We are ready to load the Intel HEX stream into DRAM. * * Hmm.. With no hardware handshake, there is a possibility of data loss * to overrunning incoming data buffer. So far I have not seen this at * 115200 8N1, but still it is a possibility. */ printf("Send Intel HEX file now\n"); fflush(stdout); ret = hex2bin(&rawinstream.public, &memoutstream.public, (uint32_t)SAM_ISRAM_VSECTION, (uint32_t)(SAM_ISRAM_VSECTION + CONFIG_SAMA5D4EK_AT25_PROGSIZE), 0); if (ret < 0) { /* We failed the load */ fprintf(stderr, "ERROR: Intel HEX file load failed: %d\n", ret); close(fd); return EXIT_FAILURE; } /* Replace the vector at offset 0x14 with the size of the image to load * into SRAM. The RomBOOT loader expects to find this size at that * location. */ *(uint32_t *)(SAM_DDRCS_VSECTION + 0x14) = memoutstream.public.nput; /* The HEX file load was successful, write the data to FLASH */ printf("Successfully loaded the Intel HEX file into memory...\n"); printf(" Writing %d bytes to the AT25 Serial FLASH\n", memoutstream.public.nput); remaining = memoutstream.public.nput; src = (uint8_t *)SAM_DDRCS_VSECTION; do { nwritten = write(fd, src, memoutstream.public.nput); if (nwritten <= 0) { int errcode = errno; if (errno != EINTR) { fprintf(stderr, "ERROR: Write failed: %d\n", errcode); close(fd); return EXIT_FAILURE; } } else { remaining -= nwritten; src += nwritten; } } while (remaining > 0); close(fd); /* Now verify that the image in memory and the image in FLASH are truly * the same. */ printf(" Verifying %d bytes in the AT25 Serial FLASH\n", memoutstream.public.nput); /* Open the AT25 device for writing */ fd = open(g_at25dev, O_RDONLY); if (fd < 0) { int errcode = errno; fprintf(stderr, "ERROR: Failed to open %s: %d\n", g_at25dev, errcode); return EXIT_FAILURE; } remaining = memoutstream.public.nput; src = (const uint8_t *)SAM_DDRCS_VSECTION; do { rdsize = remaining; if (rdsize > IOBUFFER_SIZE) { rdsize = IOBUFFER_SIZE; } nread = read(fd, g_iobuffer, rdsize); if (nread <= 0) { int errcode = errno; if (errno != EINTR) { fprintf(stderr, "ERROR: Read failed: %d\n", errcode); close(fd); return EXIT_FAILURE; } } else { if (memcmp(g_iobuffer, src, nread) != 0) { fprintf(stderr, "ERROR: Verify failed at offset %d\n", memoutstream.public.nput - remaining); close(fd); return EXIT_FAILURE; } remaining -= nwritten; src += nwritten; } } while (remaining > 0); printf(" Successfully verified %d bytes in the AT25 Serial FLASH\n", memoutstream.public.nput); close(fd); return EXIT_SUCCESS; }