README ^^^^^^ mount Configures to use examples/mount. This configuration may be selected as follows: cd /tools ./Configure.sh sim/mount nettest Configures to use examples/nettest. This configuration enables networking using the network TAP device. It may be selected via: cd /tools ./Configure.sh sim/nettest NOTE: The NuttX network is not, however, functional on the TAP device yet. nsh Configures to use the NuttShell at examples/nsh. This configuration may be selected as follows: cd /tools ./Configure.sh sim/nsh nx Configures to use examples/nx. This configuration may be selected as follows: cd /tools ./Configure.sh sim/nx Special simulated framebuffer configuration options: CONFIG_SIM_X11FB - Use X11 window for framebuffer CONFIG_SIM_FBHEIGHT - Height of the framebuffer in pixels CONFIG_SIM_FBWIDTH - Width of the framebuffer in pixels. CONFIG_SIM_FBBPP - Pixel depth in bits NOTES: - If CONFIG_SIM_X11FB is selected then the following are needed CONFIG_SIM_FBBPP (must match the resolution of the display). CONFIG_FB_CMAP=y My system has 24-bit color, but packed into 32-bit words so the correct seeting of CONFIG_SIM_FBBPP is 32. - For whatever value of CONFIG_SIM_FBBPP is selected, then the corresponidng CONFIG_NXGLIB_DISABLE_*BPP setting must not be disabled. - The default in defconfig is to use a generic memory buffer for the framebuffer. defconfig-x11 is an example with X11 support enabled. - The default is the single-user NX implementation. To select the multi-user NX implementation: CONFG_NX_MULTIUSER=y CONFIG_DISABLE_MQUEUE=n ostest The "standard" NuttX examples/ostest configuration. This configuration may be selected as follows: cd /tools ./Configure.sh sim/ostest pashello Configures to use examples/pashello. This configuration may by selected as follows: cd /tools ./Configure.sh sim/pashello