VSN Board Support Package, for the NuttX, Uros Platise =============================================================================== http://www.netClamps.com The directory contains start-up and board level functions. Execution starts in the following order: - sysclock, immediately after reset stm32_rcc calls external clock configuration when CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG=y is set. It must be set for the VSN board. - boot, performs initial chip and board initialization - sched/os_bringup.c then calls either user_start or exec_namedapp() with application as set in the .config Naming throughout the code ========================== - _init(): used to be called once only, after powerup, to perform board initialization - _start() or called via FS _open(): starts peripheral power, puts it into operation - _stop() or called via FS _close(): opposite to _start() System notifications (a sort of run-levels) =========================================== On the VSN, NSH represents the core application as it supports scripts easily adaptable for any custom application configuration. NSH is invoked as follows (argument runs a script from the /etc/init.d directory): - nsh init: on system powerup called by the NuttX APP_START TODOs: - nsh xpowerup: run on external power used to: - try to setup an USB serial connection - configure SLIP mode, internet - start other internet services, such as telnetd, ftpd, httpd - nsh xpowerdown: run whenever USB recevied suspend signal or external power has been removed. - used to stop internet services - nsh batdown: whenever battery is completely discharged Compile notes =============================== To link-in the sif_main() utility do, in this folder: - make context TOPDIR= This will result in registering the application into the namedapp.