xtrs README
^^^^^^^^^^^^^

Current status
^^^^^^^^^^^^^^

The xtrs port is not operational yet; some work still needs to be done.

Getting a TRS80 emulator and DOS disks
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

This port uses a vintage computer based on the Z80, the TRS80.
There's a main page describing the different models of TRS80.
See: http://www.trs-80.com

An emulator for this computer is available to run TRS80 programs on a 
linux platform (http://www.tim-mann.org/xtrs.html).

Other emulators are available for other platforms. 
See http://www.trs-80.com, click on the link Emulators.

TRSDOS, LDOS and other softwares are available at:
http://discover-net.net/~dmkeil/trs80/software/trs-dos.htm

Or you can get TRSDOS 1.3 and 6.1 from this site; it's included with the emulator.
http://discover-net.net/~dmkeil/trs80/model4.htm

The SDCC toolchain is available from http://sdcc.sourceforge.net/.  All
testing has been performed using version 2.7.0 of the SDCC toolchain.

Loading an executable into xtrs
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

At http://www.trs-80.com click on the link: Getting a Software Onto an Emulator.

Configuring NuttX
^^^^^^^^^^^^^^^^^

  ostest
    This configuration performs a simple, minimal OS test using
    examples/ostest.  This can be configurated as follows:

	cd tools
	./configure.sh xtrs/ostest
	cd -
	. ./setenv.sh


  nsh
    This configuration file builds NSH (examples/nsh).  This
    configuration is not functional due to issues with use of the
    simulated serial driver (see the TODO list).

    This configuration can be selected by:

	cd tools
	./configure.sh xtrs/nsh
	cd -
	. ./setenv.sh

 pashello
    Configures to use examples/pashello for execution from FLASH
    See examples/README.txt for information about pashello.

    This configuration is not usable because the resulting binary
    is too large for the z80 address space.

    This configuration can be selected by:

	cd tools
	./configure.sh xtrs/pashello
	cd -
	. ./setenv.sh

Building the SDCC toolchain
^^^^^^^^^^^^^^^^^^^^^^^^^^^

The SDCC toolchain is built with the standard configure/make/make install
sequence.  However, some special actions are required to generate libraries
compatible with this build.  First start with the usual steps

  download
  unpack
  cd sdcc
  ./configure

But before making, we need to apply a patch to the SDCC 2.6.0 source
so that the z80 assembler can handle long symbol names

  Apply sdcc-2.6.0-asz80-symlen.patch
  cd sdcc/device/lib

Then make the SDCC binaries

  cd sdcc
  make

and install SDCC:

  sudo make install