/****************************************************************************
 * configs/z16f2800100zcog/z16f_leds.c
 *
 *   Copyright (C) 2008 Gregory Nutt. All rights reserved.
 *   Author: Gregory Nutt <gnutt@nuttx.org>
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 * 3. Neither the name NuttX nor the names of its contributors may be
 *    used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 ****************************************************************************/

/* The z16f2800100zcog board has four LEDs:
 *
 * - Green LED D1 which illuminates in the presence of Vcc
 * - Red LED D2 connected to chip port PA0_T0IN
 * - Yellow LED D3 connected to chip port PA1_T0OUT
 * - Green LED D4 connected to chip port PA2_DE0
 */

/****************************************************************************
 * Included Files
 ****************************************************************************/

#include <nuttx/config.h>

#include <arch/board/board.h>
#include "up_internal.h"

/****************************************************************************
 * Definitions
 ****************************************************************************/

/****************************************************************************
 * Private Data
 ****************************************************************************/

/****************************************************************************
 * Private Functions
 ****************************************************************************/

/****************************************************************************
 * Public Functions
 ****************************************************************************/

/****************************************************************************
 * Name: up_ledinit
 ****************************************************************************/

#ifdef CONFIG_ARCH_LEDS
void up_ledinit(void)
{
  /* The following is performed up_lowinit() as well */

  putreg8(getreg8(Z16F_GPIOA_OUT) | 0x07, Z16F_GPIOA_OUT);
  putreg8(getreg8(Z16F_GPIOA_DD) & 0xF8, Z16F_GPIOA_DD);
}

/****************************************************************************
 * Name: up_ledon
 ****************************************************************************/

void up_ledon(int led)
{
  if ((unsigned)led <= 7)
    {
       putreg8(((getreg8(Z16F_GPIOA_OUT) & 0xf8) | led), Z16F_GPIOA_OUT);
    }
}

/****************************************************************************
 * Name: up_ledoff
 ****************************************************************************/

void up_ledoff(int led)
{
  if (led >= 1)
    {
      up_ledon(led-1);
    }
}
#endif /* CONFIG_ARCH_LEDS */