/**************************************************************************** * fs/vfs/fs_poll.c * * Copyright (C) 2008-2009, 2012-2014 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include #include #include #include "inode/inode.h" #ifndef CONFIG_DISABLE_POLL /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ #define poll_semgive(sem) sem_post(sem) /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Name: poll_semtake ****************************************************************************/ static int poll_semtake(FAR sem_t *sem) { /* Take the semaphore (perhaps waiting) */ if (sem_wait(sem) < 0) { int err = get_errno(); /* The only case that an error should occur here is if the wait were * awakened by a signal. */ DEBUGASSERT(err == EINTR); return -err; } return OK; } /**************************************************************************** * Name: poll_fdsetup * * Description: * Configure (or unconfigure) one file/socket descriptor for the poll * operation. If fds and sem are non-null, then the poll is being setup. * if fds and sem are NULL, then the poll is being torn down. * ****************************************************************************/ #if CONFIG_NFILE_DESCRIPTORS > 0 static int poll_fdsetup(int fd, FAR struct pollfd *fds, bool setup) { FAR struct file *filep; FAR struct inode *inode; int ret = -ENOSYS; /* Check for a valid file descriptor */ if ((unsigned int)fd >= CONFIG_NFILE_DESCRIPTORS) { /* Perform the socket ioctl */ #if defined(CONFIG_NET) && CONFIG_NSOCKET_DESCRIPTORS > 0 if ((unsigned int)fd < (CONFIG_NFILE_DESCRIPTORS+CONFIG_NSOCKET_DESCRIPTORS)) { return net_poll(fd, fds, setup); } else #endif { return -EBADF; } } /* Get the file pointer corresponding to this file descriptor */ filep = fs_getfilep(fd); if (!filep) { /* The errno value has already been set */ return ERROR; } /* Is a driver registered? Does it support the poll method? * If not, return -ENOSYS */ inode = filep->f_inode; if (inode && inode->u.i_ops && inode->u.i_ops->poll) { /* Yes, then setup the poll */ ret = (int)inode->u.i_ops->poll(filep, fds, setup); } return ret; } #endif /**************************************************************************** * Name: poll_setup * * Description: * Setup the poll operation for each descriptor in the list. * ****************************************************************************/ #if CONFIG_NFILE_DESCRIPTORS > 0 static inline int poll_setup(FAR struct pollfd *fds, nfds_t nfds, sem_t *sem) { unsigned int i; int ret; /* Process each descriptor in the list */ for (i = 0; i < nfds; i++) { /* Setup the poll descriptor */ fds[i].sem = sem; fds[i].revents = 0; fds[i].priv = NULL; /* Check for invalid descriptors. "If the value of fd is less than 0, * events shall be ignored, and revents shall be set to 0 in that entry * on return from poll()." * * NOTE: There is a potential problem here. If there is only one fd * and if it is negative, then poll will hang. From my reading of the * spec, that appears to be the correct behavior. */ if (fds[i].fd >= 0) { /* Set up the poll on this valid file descriptor */ ret = poll_fdsetup(fds[i].fd, &fds[i], true); if (ret < 0) { return ret; } } } return OK; } #endif /**************************************************************************** * Name: poll_teardown * * Description: * Teardown the poll operation for each descriptor in the list and return * the count of non-zero poll events. * ****************************************************************************/ #if CONFIG_NFILE_DESCRIPTORS > 0 static inline int poll_teardown(FAR struct pollfd *fds, nfds_t nfds, int *count, int ret) { unsigned int i; int status; /* Process each descriptor in the list */ *count = 0; for (i = 0; i < nfds; i++) { /* Ignore negative descriptors */ if (fds[i].fd >= 0) { /* Teardown the poll */ status = poll_fdsetup(fds[i].fd, &fds[i], false); if (status < 0) { ret = status; } } /* Check if any events were posted */ if (fds[i].revents != 0) { (*count)++; } /* Un-initialize the poll structure */ fds[i].sem = NULL; } return ret; } #endif /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: poll * * Description: * poll() waits for one of a set of file descriptors to become ready to * perform I/O. If none of the events requested (and no error) has * occurred for any of the file descriptors, then poll() blocks until * one of the events occurs. * * Inputs: * fds - List of structures describing file descriptors to be monitored * nfds - The number of entries in the list * timeout - Specifies an upper limit on the time for which poll() will * block in milliseconds. A negative value of timeout means an infinite * timeout. * * Return: * On success, the number of structures that have non-zero revents fields. * A value of 0 indicates that the call timed out and no file descriptors * were ready. On error, -1 is returned, and errno is set appropriately: * * EBADF - An invalid file descriptor was given in one of the sets. * EFAULT - The fds address is invalid * EINTR - A signal occurred before any requested event. * EINVAL - The nfds value exceeds a system limit. * ENOMEM - There was no space to allocate internal data structures. * ENOSYS - One or more of the drivers supporting the file descriptor * does not support the poll method. * ****************************************************************************/ int poll(FAR struct pollfd *fds, nfds_t nfds, int timeout) { struct timespec abstime; irqstate_t flags; sem_t sem; int count = 0; int ret; sem_init(&sem, 0, 0); ret = poll_setup(fds, nfds, &sem); if (ret >= 0) { if (timeout == 0) { /* Poll returns immediately whether we have a poll event or not. */ ret = OK; } else if (timeout > 0) { time_t sec; uint32_t nsec; /* Either wait for either a poll event(s), for a signal to occur, * or for the specified timeout to elapse with no event. * * NOTE: If a poll event is pending (i.e., the semaphore has already * been incremented), sem_timedwait() will not wait, but will return * immediately. */ sec = timeout / MSEC_PER_SEC; nsec = (timeout - MSEC_PER_SEC * sec) * NSEC_PER_MSEC; /* Make sure that the following are atomic by disabling interrupts. * Interrupts will be re-enabled while we are waiting. */ flags = irqsave(); (void)clock_gettime(CLOCK_REALTIME, &abstime); abstime.tv_sec += sec; abstime.tv_nsec += nsec; if (abstime.tv_nsec >= NSEC_PER_SEC) { abstime.tv_sec++; abstime.tv_nsec -= NSEC_PER_SEC; } ret = sem_timedwait(&sem, &abstime); if (ret < 0) { int err = get_errno(); if (err == ETIMEDOUT) { /* Return zero (OK) in the event of a timeout */ ret = OK; } else { /* EINTR is the only other error expected in normal operation */ ret = -err; } } irqrestore(flags); } else { /* Wait for the poll event or signal with no timeout */ ret = poll_semtake(&sem); } /* Teardown the poll operation and get the count of events. Zero will be * returned in the case of a timeout. */ ret = poll_teardown(fds, nfds, &count, ret); } sem_destroy(&sem); /* Check for errors */ if (ret < 0) { set_errno(-ret); return ERROR; } return count; } #endif /* CONFIG_DISABLE_POLL */