/**************************************************************************** * graphics/nxmu/nxfe.h * * Copyright (C) 2008 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ #ifndef __GRAPHICS_NXMU_NXFE_H #define __GRAPHICS_NXMU_NXFE_H /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include "nxbe.h" /**************************************************************************** * Pre-Processor Definitions ****************************************************************************/ /* Configuration ************************************************************/ #ifndef CONFIG_NX_MXSERVERMSGS # define CONFIG_NX_MXSERVERMSGS 32 /* Number of pending messages in server MQ */ #endif #ifndef CONFIG_NX_MXCLIENTMSGS # define CONFIG_NX_MXCLIENTMSGS 16 /* Number of pending messages in each client MQ */ #endif /* Used to create unique client MQ name */ #define NX_CLIENT_MQNAMEFMT "/dev/nxc%d" #define NX_CLIENT_MXNAMELEN (16) #define NX_MXSVRMSGLEN (64) /* Maximum size of a client->server command */ #define NX_MXEVENTLEN (64) /* Maximum size of an event */ #define NX_MXCLIMSGLEN (64) /* Maximum size of a server->client message */ /* Handy macros */ #define nxmu_semgive(sem) sem_post(sem) /* To match nxmu_semtake() */ /**************************************************************************** * Public Types ****************************************************************************/ /* Client/Connection structures *********************************************/ /* Client state */ enum nx_clistate_e { NX_CLISTATE_NOTCONNECTED = 0, /* Waiting for server to acknowledge connection */ NX_CLISTATE_CONNECTED, /* Connection established (normal state) */ NX_CLISTATE_DISCONNECT_PENDING, /* Waiting for server to acknowledge disconnect */ }; /* This structure represents a connection between the client and the server */ struct nxfe_conn_s { /* This number uniquely identifies the client */ int cid; /* Client ID (CID) */ ubyte state; /* See enum nx_clistate_e */ /* These are only usable on the client side of the connection */ mqd_t crdmq; /* MQ to read from the server (may be non-blocking) */ mqd_t cwrmq; /* MQ to write to the server (blocking) */ FAR const struct nx_callback_s *cb; /* Message handling callbacks */ /* These are only usable on the server side of the connection */ mqd_t swrmq; /* MQ to write to the client */ }; /* Server state structure ***************************************************/ /* This the the server 'front-end' state structure */ struct nxfe_state_s { /* The 'back-end' window status. Must be first so that instances of * struct nxbe_state_s can be simply cast to an instance of struct * nxfe_state_s */ struct nxbe_state_s be; /* This is the server's connection to iself */ struct nxfe_conn_s conn; }; /* Message IDs **************************************************************/ enum nxmsg_e { /* Server-to-Client Messages **********************************************/ NX_CLIMSG_CONNECTED = 1, /* The server has completed the connection and is ready */ NX_CLIMSG_DISCONNECTED, /* The server has disconnected */ NX_CLIMSG_REDRAW, /* Re-draw the specified window */ NX_CLIMSG_NEWPOSITION, /* New window size/position */ NX_CLIMSG_MOUSEIN, /* New mouse positional data available for window */ NX_CLIMSG_KBDIN, /* New keypad input available for window */ /* Client-to-Server Messages **********************************************/ NX_SVRMSG_CONNECT, /* Establish connection with new NX server client */ NX_SVRMSG_DISCONNECT, /* Tear down connection with terminating client */ NX_SVRMSG_OPENWINDOW, /* Create a new window */ NX_SVRMSG_CLOSEWINDOW, /* Close an existing window */ NX_SVRMSG_SETPOSITION, /* Window position has changed */ NX_SVRMSG_SETSIZE, /* Window size has changed */ NX_SVRMSG_GETPOSITION, /* Get the current window position and size */ NX_SVRMSG_RAISE, /* Move the window to the top */ NX_SVRMSG_LOWER, /* Move the window to the bottom */ NX_SVRMSG_FILL, /* Fill a rectangle in the window with a color */ NX_SVRMSG_FILLTRAP, /* Fill a trapezoidal region in the window with a color */ NX_SVRMSG_MOVE, /* Move a rectangular region within the window */ NX_SVRMSG_BITMAP, /* Copy a rectangular bitmap into the window */ NX_SVRMSG_SETBGCOLOR, /* Set the color of the background */ NX_SVRMSG_MOUSEIN, /* New mouse report from mouse client */ NX_SVRMSG_KBDIN, /* New keyboard report from keyboard client */ }; /* Message priorities -- they must all be at the same priority to assure * FIFO execution. */ #define NX_CLIMSG_PRIO 42 #define NX_SVRMSG_PRIO 42 /* Server-to-Client Message Structures **************************************/ /* The generic message structure. All messages begin with this form. Also, messages * that have no data other than the msgid event use this structure. This includes: * NX_CLIMSG_CONNECTED and NX_CLIMSG_DISCONNECTED. */ struct nxclimsg_s { uint32 msgid; /* Any of nxclimsg_e */ }; /* This message is received when a requested window has been opened. If wnd is NULL * then errorcode is the errno value that provides the explanation of the error. */ struct nxclimsg_redraw_s { uint32 msgid; /* NX_CLIMSG_REDRAW */ FAR struct nxbe_window_s *wnd; /* The handle to the window to redraw in */ FAR struct nxgl_rect_s rect; /* The rectangle to be redrawn */ boolean more; /* TRUE: more redraw messages follow */ }; /* This message informs the client of the new size or position of the window */ struct nxclimsg_newposition_s { uint32 msgid; /* NX_CLIMSG_NEWPOSITION */ FAR struct nxbe_window_s *wnd; /* The window whose position/size has changed */ FAR struct nxgl_rect_s size; /* The current window size */ FAR struct nxgl_point_s pos; /* The current window position */ }; /* This message reports a new mouse event to a particular window */ #ifdef CONFIG_NX_MOUSE struct nxclimsg_mousein_s { uint32 msgid; /* NX_SVRMSG_MOUSEIN */ FAR struct nxbe_window_s *wnd; /* The handle of window receiving mouse input */ struct nxgl_point_s pos; /* Mouse X/Y position */ ubyte buttons; /* Mouse button set */ } #endif /* This message reports a new keypad event to a particular window */ #ifdef CONFIG_NX_KBDIN struct nxclimsg_key { uint32 msgid; /* NX_CLIMSG_KBDIN */ FAR struct nxbe_window_s *wnd; /* The handle of window receiving keypad input */ ubyte nch /* Number of characters received */ ubyte ch[1]; /* Array of received characters */ }; #endif /* Client-to-Server Message Structures **************************************/ /* The generic message structure. All server messages begin with this form. Also * messages that have no additional data fields use this structure. This includes: * NX_SVRMSG_CONNECT and NX_SVRMSG_DISCONNECT. */ struct nxsvrmsg_s /* Generic server message */ { uint32 msgid; /* One of enum nxsvrmsg_e */ FAR struct nxfe_conn_s *conn; /* The specific connection sending the message */ }; /* This message requests the server to create a new window */ struct nxsvrmsg_openwindow_s { uint32 msgid; /* NX_SVRMSG_OPENWINDOW */ FAR struct nxfe_conn_s *conn; /* The specific connection sending the message */ FAR struct nxbe_window_s *wnd; /* The pre-allocated window structure */ }; /* This message informs the server that client wishes to close a window */ struct nxsvrmsg_closewindow_s { uint32 msgid; /* NX_SVRMSG_CLOSEWINDOW */ FAR struct nxbe_window_s *wnd; /* The window to be closed */ }; /* This message informs the server that the size or position of the window has changed */ struct nxsvrmsg_setposition_s { uint32 msgid; /* NX_SVRMSG_SETPOSITION */ FAR struct nxbe_window_s *wnd; /* The window whose position/size has changed */ FAR struct nxgl_point_s pos; /* The new window position */ }; /* This message informs the server that the size or position of the window has changed */ struct nxsvrmsg_setsize_s { uint32 msgid; /* NX_SVRMSG_SETSIZE */ FAR struct nxbe_window_s *wnd; /* The window whose position/size has changed */ FAR struct nxgl_rect_s size; /* The new window size */ }; /* This message informs the server that the size or position of the window has changed */ struct nxsvrmsg_getposition_s { uint32 msgid; /* NX_SVRMSG_FETPOSITION */ FAR struct nxbe_window_s *wnd; /* The window whose position/size has changed */ }; /* This message informs the server to raise this window to the top of the display */ struct nxsvrmsg_raise_s { uint32 msgid; /* NX_SVRMSG_RAISE */ FAR struct nxbe_window_s *wnd; /* The window to be raised */ }; /* This message informs the server to lower this window to the bottom of the display */ struct nxsvrmsg_lower_s { uint32 msgid; /* NX_SVRMSG_LOWER */ FAR struct nxbe_window_s *wnd; /* The window to be lowered */ }; /* Fill a rectangle in the window with a color */ struct nxsvrmsg_fill_s { uint32 msgid; /* NX_SVRMSG_FILL */ FAR struct nxbe_window_s *wnd; /* The window to fill */ struct nxgl_rect_s rect; /* The rectangle in the window to fill */ nxgl_mxpixel_t color[CONFIG_NX_NPLANES]; /* Color to use in the fill */ }; /* Fill a trapezoidal region in the window with a color */ struct nxsvrmsg_filltrapezoid_s { uint32 msgid; /* NX_SVRMSG_FILLTRAP */ FAR struct nxbe_window_s *wnd; /* The window to fill */ struct nxgl_trapezoid_s trap; /* The trapezoidal region in the window to fill */ nxgl_mxpixel_t color[CONFIG_NX_NPLANES]; /* Color to use in the fill */ }; /* Move a rectangular region within the window */ struct nxsvrmsg_move_s { uint32 msgid; /* NX_SVRMSG_MOVE */ FAR struct nxbe_window_s *wnd; /* The window within which the move is done */ struct nxgl_rect_s rect; /* Describes the rectangular region to move */ struct nxgl_point_s offset; /* The offset to move the region */ }; /* Copy a rectangular bitmap into the window */ struct nxsvrmsg_bitmap_s { uint32 msgid; /* NX_SVRMSG_BITMAP */ FAR struct nxbe_window_s *wnd; /* The window with will receive the bitmap image */ struct nxgl_rect_s dest; /* Destination location of the bitmap in the window */ FAR const void *src[CONFIG_NX_NPLANES]; /* The start of the source image. */ struct nxgl_point_s origin; /* Offset into the source image data */ unsigned int stride; /* The width of the full source image in pixels. */ }; /* Set the color of the background */ struct nxsvrmsg_setbgcolor_s { uint32 msgid; /* NX_SVRMSG_SETBGCOLOR */ nxgl_mxpixel_t color[CONFIG_NX_NPLANES]; /* Color to use in the background */ }; /* This message reports a new mouse event from a hardware controller attached to * the server as a regular client (this message may have even been sent from an * interrupt handler). */ #ifdef CONFIG_NX_MOUSE struct nxsvrmsg_mousein_s { uint32 msgid; /* NX_SVRMSG_MOUSEIN */ struct nx_point_x pt; /* Mouse X/Y position */ ubyte buttons; /* Mouse button set */ } #endif /* This message reports a new keyboard event from a hardware controller attached to * some kind of keypad (this message may have even been sent from an * interrupt handler). */ #ifdef CONFIG_NX_EXTERNKBD struct nxsvrmsg_kbdin_s { uint32 msgid; /* NX_SVRMSG_KBDIN */ ubyte nch /* Number of characters received */ ubyte ch[1]; /* Array of received characters */ } #endif /**************************************************************************** * Public Data ****************************************************************************/ #undef EXTERN #if defined(__cplusplus) #define EXTERN extern "C" extern "C" { #else #define EXTERN extern #endif /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: nxmu_semtake * * Description: * Take the semaphore, handling EINTR wakeups. See the nxmu_semgive macro. * * Input Parameters: * sem - the semaphore to be taken. * * Return: * None * ****************************************************************************/ EXTERN void nxmu_semtake(sem_t *sem); /**************************************************************************** * Name: nxmu_openwindow * * Description: * Create a new window. * * Input Parameters: * conn - The client containing connection information [IN] * svr - The server state structure [IN] * wnd - The pre-allocated window structure to be ininitilized [IN/OUT] * * Return: * None * ****************************************************************************/ EXTERN void nxmu_openwindow(FAR struct nxfe_conn_s *conn, FAR struct nxbe_state_s *be, FAR struct nxbe_window_s *wnd); /**************************************************************************** * Name: nxfe_reportposition * * Descripton: * Report the new size/position of the window. * ****************************************************************************/ EXTERN void nxfe_reportposition(FAR struct nxbe_window_s *wnd); /**************************************************************************** * Name: nxfe_redrawreq * * Descripton: * Request the client that has this window to redraw the rectangular region. * ****************************************************************************/ EXTERN void nxfe_redrawreq(FAR struct nxbe_window_s *wnd, FAR const struct nxgl_rect_s *rect); /**************************************************************************** * Name: nxmu_mouseinit * * Description: * Initialize with the mouse in the center of the display * ****************************************************************************/ #ifdef CONFIG_NX_MOUSE EXTERN void nxmu_mouseinit(int x, int y); #endif /**************************************************************************** * Name: nxmu_mousereport * * Description: * Report mouse position info to the specified window * ****************************************************************************/ #ifdef CONFIG_NX_MOUSE EXTERN void nxmu_mousereport(struct nxbe_window_s *wnd); #endif /**************************************************************************** * Name: nxmu_mousein * * Description: * New positional data has been received from the thread or interrupt * handler that manages some kind of pointing hardware. Route that * positional data to the appropriate window client. * ****************************************************************************/ #ifdef CONFIG_NX_MOUSE EXTERN nxmu_mousein(FAR struct nxfe_state_s *fe, FAR const struct nxgl_point_s *pos, int button); #endif /**************************************************************************** * Name: nxmu_kbdin * * Descripton: * New keyboard data has been received from the thread or interrupt * handler that manages some kind of keyboard/keypad hardware. Route that * positional data to the appropriate window client. * ****************************************************************************/ #ifdef CONFIG_NX_KBD EXTERN void nxmu_kbdin(FAR struct nxs_server_s *svr, ubyte nch, ubyte *ch); #endif #undef EXTERN #if defined(__cplusplus) } #endif #endif /* __GRAPHICS_NXMU_NXFE_H */