/**************************************************************************** * uip-arch.h * Defines architecture-specific device driver interfaces to uIP * * Copyright (C) 2007 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Derived largely from portions of uIP with has a similar BSD-styple license: * * Copyright (c) 2001-2003, Adam Dunkels. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ #ifndef __UIP_ARCH_H #define __UIP_ARCH_H #include #include /**************************************************************************** * Included Files ****************************************************************************/ #include /**************************************************************************** * Definitions ****************************************************************************/ /* The following flags are passed as an argument to the uip_interrupt() * function. They are used to distinguish between the two cases where * uip_interrupt() is called. It can be called either because we have * incoming data that should be processed, or because the periodic * timer has fired. These values are never used directly, but only in * the macrose defined in this file. */ #define UIP_DATA 1 /* Tells uIP that there is incoming data in the uip_buf buffer. The * length of the data is stored in the global variable uip_len. */ #define UIP_TIMER 2 /* Tells uIP that the periodic timer has fired. */ #define UIP_POLL_REQUEST 3 /* Tells uIP that a connection should be polled. */ #define UIP_UDP_SEND_CONN 4 /* Tells uIP that a UDP datagram should be constructed in the * uip_buf buffer. */ #ifdef CONFIG_NET_UDP # define UIP_UDP_TIMER 5 #endif /* CONFIG_NET_UDP */ /* uIP device driver functions * * These functions are used by a network device driver for interacting * with uIP. * * Process an incoming packet. * * This function should be called when the device driver has received * a packet from the network. The packet from the device driver must * be present in the uip_buf buffer, and the length of the packet * should be placed in the uip_len variable. * * When the function returns, there may be an outbound packet placed * in the uip_buf packet buffer. If so, the uip_len variable is set to * the length of the packet. If no packet is to be sent out, the * uip_len variable is set to 0. * * The usual way of calling the function is presented by the source * code below. * * uip_len = devicedriver_poll(); * if(uip_len > 0) { * uip_input(); * if(uip_len > 0) { * devicedriver_send(); * } * } * * Note: If you are writing a uIP device driver that needs ARP * (Address Resolution Protocol), e.g., when running uIP over * Ethernet, you will need to call the uIP ARP code before calling * this function: * * #define BUF ((struct uip_eth_hdr *)&uip_buf[0]) * uip_len = ethernet_devicedrver_poll(); * if(uip_len > 0) { * if(BUF->type == HTONS(UIP_ETHTYPE_IP)) { * uip_arp_ipin(); * uip_input(); * if(uip_len > 0) { * uip_arp_out(); * ethernet_devicedriver_send(); * } * } else if(BUF->type == HTONS(UIP_ETHTYPE_ARP)) { * uip_arp_arpin(); * if(uip_len > 0) { * ethernet_devicedriver_send(); * } * } */ #define uip_input() uip_interrupt(UIP_DATA) /* Periodic processing for a connection identified by its number. * * This function does the necessary periodic processing (timers, * polling) for a uIP TCP conneciton, and should be called when the * periodic uIP timer goes off. It should be called for every * connection, regardless of whether they are open of closed. * * When the function returns, it may have an outbound packet waiting * for service in the uIP packet buffer, and if so the uip_len * variable is set to a value larger than zero. The device driver * should be called to send out the packet. * * The ususal way of calling the function is through a for() loop like * this: * * for(i = 0; i < UIP_CONNS; ++i) * { * uip_tcppoll(i); * if (uip_len > 0) * { * devicedriver_send(); * } * } * * Note: If you are writing a uIP device driver that needs ARP * (Address Resolution Protocol), e.g., when running uIP over * Ethernet, you will need to call the uip_arp_out() function before * calling the device driver: * * for(i = 0; i < UIP_CONNS; ++i) * { * uip_tcppoll(i); * if (uip_len > 0) * { * uip_arp_out(); * ethernet_devicedriver_send(); * } * } * * conn The number of the connection which is to be periodically polled. */ extern void uip_tcppoll(unsigned int conn); #ifdef CONFIG_NET_UDP /* Periodic processing for a UDP connection identified by its number. * * This function is essentially the same as uip_tcppoll(), but for * UDP connections. It is called in a similar fashion as the * uip_tcppoll() function: * * for(i = 0; i < UIP_UDP_CONNS; i++) * { * uip_udppoll(i); * if(uip_len > 0) * { * devicedriver_send(); * } * } * * Note: As for the uip_tcppoll() function, special care has to be * taken when using uIP together with ARP and Ethernet: * * for(i = 0; i < UIP_UDP_CONNS; i++) * { * uip_udppoll(i); * if(uip_len > 0) * { * uip_arp_out(); * ethernet_devicedriver_send(); * } * } * * conn The number of the UDP connection to be processed. */ extern void uip_udppoll(unsigned int conn); #endif /* CONFIG_NET_UDP */ /**************************************************************************** * Public Types ****************************************************************************/ /**************************************************************************** * Public Variables ****************************************************************************/ /**************************************************************************** * Pulblic Function Prototypes ****************************************************************************/ /* Architecure support * * uip_interrupt(flag): * * The actual uIP function which does all the work. Called from the * interrupt level by a device driver. */ extern void uip_interrupt(uint8 flag); /* By defining UIP_ARCH_CHKSUM, the architecture can replace the following * functions with hardware assisted solutions. */ /* Carry out a 32-bit addition. * * Because not all architectures for which uIP is intended has native * 32-bit arithmetic, uIP uses an external C function for doing the * required 32-bit additions in the TCP protocol processing. This * function should add the two arguments and place the result in the * global variable uip_acc32. * * Note: The 32-bit integer pointed to by the op32 parameter and the * result in the uip_acc32 variable are in network byte order (big * endian). * * op32 A pointer to a 4-byte array representing a 32-bit * integer in network byte order (big endian). * * op16 A 16-bit integer in host byte order. */ extern void uip_add32(uint8 *op32, uint16 op16); /* Calculate the Internet checksum over a buffer. * * The Internet checksum is the one's complement of the one's * complement sum of all 16-bit words in the buffer. * * See RFC1071. * * Note: This function is not called in the current version of uIP, * but future versions might make use of it. * * buf A pointer to the buffer over which the checksum is to be * computed. * * len The length of the buffer over which the checksum is to * be computed. * * Return: The Internet checksum of the buffer. */ extern uint16 uip_chksum(uint16 *buf, uint16 len); /* Calculate the IP header checksum of the packet header in uip_buf. * * The IP header checksum is the Internet checksum of the 20 bytes of * the IP header. * * Return: The IP header checksum of the IP header in the uip_buf * buffer. */ extern uint16 uip_ipchksum(void); /* Calculate the TCP checksum of the packet in uip_buf and uip_appdata. * * The TCP checksum is the Internet checksum of data contents of the * TCP segment, and a pseudo-header as defined in RFC793. * * Note: The uip_appdata pointer that points to the packet data may * point anywhere in memory, so it is not possible to simply calculate * the Internet checksum of the contents of the uip_buf buffer. * * Return: The TCP checksum of the TCP segment in uip_buf and pointed * to by uip_appdata. */ extern uint16 uip_tcpchksum(void); extern uint16 uip_udpchksum(void); #endif /* __UIP_ARCH_H */