/****************************************************************************
* include/syslog.h
*
* Copyright (C) 2013-2014 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#ifndef __INCLUDE_SYSLOG_H
#define __INCLUDE_SYSLOG_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <stdarg.h>
#include <stdbool.h>
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* The option argument to openlog() is an OR of any of these:
*
* LOG_CONS - Write directly to system console if there is an error
* while sending to system logger.
* LOG_NDELAY - Open the connection immediately (normally, the connection
* is opened when the first message is logged).
* LOG_NOWAIT - Don't wait for child processes that may have been created
* while logging the message.
* LOG_ODELAY - The converse of LOG_NDELAY; opening of the connection is
* delayed until syslog() is called. (This is the default,
* and need not be specified.)
* LOG_PERROR - (Not in POSIX.1-2001 or POSIX.1-2008.) Print to stderr
* as well (Linux).
* LOG_PID - Include PID with each message.
*/
/* Note: openlog() is not currently supported */
/* The facility argument is used to specify what type of program is logging
* the message. This lets the configuration file specify that messages from
* different facilities will be handled differently.
*
* LOG_AUTH - Security/authorization messages
* LOG_AUTHPRIV - Security/authorization messages (private)
* LOG_CRON - Clock daemon (cron and at)
* LOG_DAEMON - System daemons without separate facility value
* LOG_FTP - Ftp daemon
* LOG_KERN - Lernel messages (these can't be generated from user
* processes)
* LOG_LOCAL0 through LOG_LOCAL7 - Reserved for local use
* LOG_LPR - Line printer subsystem
* LOG_MAIL - Mail subsystem
* LOG_NEWS - USENET news subsystem
* LOG_SYSLOG - Messages generated internally by syslogd(8)
* LOG_USER - Generic user-level messages (default)
* LOG_UUCP - UUCP subsystem
*/
#define LOG_AUTH 0
#define LOG_AUTHPRIV 0
#define LOG_CRON 0
#define LOG_DAEMON 0
#define LOG_FTP 0
#define LOG_KERN 0
#define LOG_LOCAL0 0
#define LOG_LOCAL1 0
#define LOG_LOCAL2 0
#define LOG_LOCAL3 0
#define LOG_LOCAL4 0
#define LOG_LOCAL5 0
#define LOG_LOCAL6 0
#define LOG_LOCAL7 0
#define LOG_LPR 0
#define LOG_MAIL 0
#define LOG_NEWS 0
#define LOG_SYSLOG 0
#define LOG_USER 0
#define LOG_UUCP 0
/* This determines the importance of the message. The levels are, in order
* of decreasing importance:
*/
#define LOG_EMERG 0 /* System is unusable */
#define LOG_ALERT 1 /* Action must be taken immediately */
#define LOG_CRIT 2 /* Critical conditions */
#define LOG_ERR 3 /* Error conditions */
#define LOG_WARNING 4 /* Warning conditions */
#define LOG_NOTICE 5 /* Normal, but significant, condition */
#define LOG_INFO 6 /* Informational message */
#define LOG_DEBUG 7 /* Debug-level message */
/* Used with setlogmask() */
#define LOG_MASK(p) (1 << (p))
#define LOG_UPTO(p) ((1 << (p)) - 1)
#define LOG_ALL 0xff
/****************************************************************************
* Public Type Declarations
****************************************************************************/
/****************************************************************************
* Public Variables
****************************************************************************/
/****************************************************************************
* Public Function Prototypes
****************************************************************************/
#if defined(__cplusplus)
extern "C"
{
#endif
#if 0 /* Not supported */
void openlog(FAR const char *ident, int option, int facility);
void closelog(void);
#endif
/****************************************************************************
* Name: syslog and vsyslog
*
* Description:
* syslog() generates a log message. The priority argument is formed by
* ORing the facility and the level values (see include/syslog.h). The
* remaining arguments are a format, as in printf and any arguments to the
* format.
*
* The NuttX implementation does not support any special formatting
* characters beyond those supported by printf.
*
* The function vsyslog() performs the same task as syslog() with the
* difference that it takes a set of arguments which have been obtained
* using the stdarg variable argument list macros.
*
****************************************************************************/
int syslog(int priority, FAR const char *format, ...);
int vsyslog(int priority, FAR const char *src, va_list ap);
/****************************************************************************
* Name: lowsyslog and lowvsyslog
*
* Description:
* syslog() generates a log message. The priority argument is formed by
* ORing the facility and the level values (see include/syslog.h). The
* remaining arguments are a format, as in printf and any arguments to the
* format.
*
* This is a non-standard, low-level system logging interface. The
* difference between syslog() and lowsyslog() is that the syslog()
* interface writes to the syslog device (usually fd=1, stdout) whereas
* lowsyslog() uses a lower level interface that works even from interrupt
* handlers.
*
* If the platform cannot support lowsyslog, then we will substitute the
* standard syslogging functions. These will, however, probably cause
* problems if called from interrupt handlers, depending upon the nature of
* the underlying syslog device.
*
* The function lowvsyslog() performs the same task as lowsyslog() with
* the difference that it takes a set of arguments which have been
* obtained using the stdarg variable argument list macros.
*
****************************************************************************/
#ifdef CONFIG_ARCH_LOWPUTC
int lowsyslog(int priority, FAR const char *format, ...);
int lowvsyslog(int priority, FAR const char *format, va_list ap);
#else
# ifdef CONFIG_CPP_HAVE_VARARGS
# define lowsyslog(p,f,...) syslog(p,f,##__VA_ARGS__)
# else
# define lowsyslog (void)
# endif
# define lowvsyslog(p,f,a) vsyslog(p,f,a)
#endif
/****************************************************************************
* Name: setlogmask
*
* Description:
* The setlogmask() function sets the logmask and returns the previous
* mask. If the mask argument is 0, the current logmask is not modified.
*
* The SYSLOG priorities are: LOG_EMERG, LOG_ALERT, LOG_CRIT, LOG_ERR,
* LOG_WARNING, LOG_NOTICE, LOG_INFO, and LOG_DEBUG. The bit corresponding
* to a priority p is LOG_MASK(p); LOG_UPTO(p) provides the mask of all
* priorities in the above list up to and including p.
*
* REVISIT: Per POSIX the syslog mask should be a per-process value but in
* NuttX, the scope of the mask is dependent on the nature of the build.
*
* Flat Build: There is one, global SYSLOG mask that controls all output.
* Protected Build: There are two SYSLOG masks. One within the kernel
* that controls only kernel output. And one in user-space that controls
* only user SYSLOG output.
* Kernel Build: The kernel build is compliant with the POSIX requirement:
* There will be one mask for for each user process, controlling the
* SYSLOG output only form that process. There will be a separate mask
* accessable only in the kernel code to control kernel SYSLOG output.
*
****************************************************************************/
int setlogmask(int mask);
#if defined(__cplusplus)
}
#endif
#endif /* __INCLUDE_SYSLOG_H */
