#ifndef MAVLINK_TYPES_H_
#define MAVLINK_TYPES_H_
// Visual Studio versions before 2013 don't conform to C99.
#if (defined _MSC_VER) && (_MSC_VER < 1800)
#include <stdint.h>
#else
#include <inttypes.h>
#endif
#ifndef MAVLINK_MAX_PAYLOAD_LEN
// it is possible to override this, but be careful!
#define MAVLINK_MAX_PAYLOAD_LEN 255 ///< Maximum payload length
#endif
#define MAVLINK_CORE_HEADER_LEN 5 ///< Length of core header (of the comm. layer): message length (1 byte) + message sequence (1 byte) + message system id (1 byte) + message component id (1 byte) + message type id (1 byte)
#define MAVLINK_NUM_HEADER_BYTES (MAVLINK_CORE_HEADER_LEN + 1) ///< Length of all header bytes, including core and checksum
#define MAVLINK_NUM_CHECKSUM_BYTES 2
#define MAVLINK_NUM_NON_PAYLOAD_BYTES (MAVLINK_NUM_HEADER_BYTES + MAVLINK_NUM_CHECKSUM_BYTES)
#define MAVLINK_MAX_PACKET_LEN (MAVLINK_MAX_PAYLOAD_LEN + MAVLINK_NUM_NON_PAYLOAD_BYTES) ///< Maximum packet length
#define MAVLINK_MSG_ID_EXTENDED_MESSAGE 255
#define MAVLINK_EXTENDED_HEADER_LEN 14
#if (defined _MSC_VER) || ((defined __APPLE__) && (defined __MACH__)) || (defined __linux__)
/* full fledged 32bit++ OS */
#define MAVLINK_MAX_EXTENDED_PACKET_LEN 65507
#else
/* small microcontrollers */
#define MAVLINK_MAX_EXTENDED_PACKET_LEN 2048
#endif
#define MAVLINK_MAX_EXTENDED_PAYLOAD_LEN (MAVLINK_MAX_EXTENDED_PACKET_LEN - MAVLINK_EXTENDED_HEADER_LEN - MAVLINK_NUM_NON_PAYLOAD_BYTES)
#pragma pack(push, 1)
/**
* Old-style 4 byte param union
*
* This struct is the data format to be used when sending
* parameters. The parameter should be copied to the native
* type (without type conversion)
* and re-instanted on the receiving side using the
* native type as well.
*/
typedef struct param_union {
union {
float param_float;
int32_t param_int32;
uint32_t param_uint32;
int16_t param_int16;
uint16_t param_uint16;
int8_t param_int8;
uint8_t param_uint8;
uint8_t bytes[4];
};
uint8_t type;
} mavlink_param_union_t;
/**
* New-style 8 byte param union
* mavlink_param_union_double_t will be 8 bytes long, and treated as needing 8 byte alignment for the purposes of MAVLink 1.0 field ordering.
* The mavlink_param_union_double_t will be treated as a little-endian structure.
*
* If is_double is 1 then the type is a double, and the remaining 63 bits are the double, with the lowest bit of the mantissa zero.
* The intention is that by replacing the is_double bit with 0 the type can be directly used as a double (as the is_double bit corresponds to the
* lowest mantissa bit of a double). If is_double is 0 then mavlink_type gives the type in the union.
* The mavlink_types.h header will also need to have shifts/masks to define the bit boundaries in the above,
* as bitfield ordering isn’t consistent between platforms. The above is intended to be for gcc on x86,
* which should be the same as gcc on little-endian arm. When using shifts/masks the value will be treated as a 64 bit unsigned number,
* and the bits pulled out using the shifts/masks.
*/
typedef union {
struct {
uint8_t is_double:1;
uint8_t mavlink_type:7;
union {
char c;
uint8_t uint8;
int8_t int8;
uint16_t uint16;
int16_t int16;
uint32_t uint32;
int32_t int32;
float f;
uint8_t align[7];
};
};
uint8_t data[8];
} mavlink_param_union_double_t;
typedef struct __mavlink_system {
uint8_t sysid; ///< Used by the MAVLink message_xx_send() convenience function
uint8_t compid; ///< Used by the MAVLink message_xx_send() convenience function
uint8_t type; ///< Unused, can be used by user to store the system's type
uint8_t state; ///< Unused, can be used by user to store the system's state
uint8_t mode; ///< Unused, can be used by user to store the system's mode
uint32_t nav_mode; ///< Unused, can be used by user to store the system's navigation mode
} mavlink_system_t;
typedef struct __mavlink_message {
uint16_t checksum; ///< sent at end of packet
uint8_t magic; ///< protocol magic marker
uint8_t len; ///< Length of payload
uint8_t seq; ///< Sequence of packet
uint8_t sysid; ///< ID of message sender system/aircraft
uint8_t compid; ///< ID of the message sender component
uint8_t msgid; ///< ID of message in payload
uint64_t payload64[(MAVLINK_MAX_PAYLOAD_LEN+MAVLINK_NUM_CHECKSUM_BYTES+7)/8];
} mavlink_message_t;
typedef struct __mavlink_extended_message {
mavlink_message_t base_msg;
int32_t extended_payload_len; ///< Length of extended payload if any
uint8_t extended_payload[MAVLINK_MAX_EXTENDED_PAYLOAD_LEN];
} mavlink_extended_message_t;
#pragma pack(pop)
typedef enum {
MAVLINK_TYPE_CHAR = 0,
MAVLINK_TYPE_UINT8_T = 1,
MAVLINK_TYPE_INT8_T = 2,
MAVLINK_TYPE_UINT16_T = 3,
MAVLINK_TYPE_INT16_T = 4,
MAVLINK_TYPE_UINT32_T = 5,
MAVLINK_TYPE_INT32_T = 6,
MAVLINK_TYPE_UINT64_T = 7,
MAVLINK_TYPE_INT64_T = 8,
MAVLINK_TYPE_FLOAT = 9,
MAVLINK_TYPE_DOUBLE = 10
} mavlink_message_type_t;
#define MAVLINK_MAX_FIELDS 64
typedef struct __mavlink_field_info {
const char *name; // name of this field
const char *print_format; // printing format hint, or NULL
mavlink_message_type_t type; // type of this field
unsigned int array_length; // if non-zero, field is an array
unsigned int wire_offset; // offset of each field in the payload
unsigned int structure_offset; // offset in a C structure
} mavlink_field_info_t;
// note that in this structure the order of fields is the order
// in the XML file, not necessary the wire order
typedef struct __mavlink_message_info {
const char *name; // name of the message
unsigned num_fields; // how many fields in this message
mavlink_field_info_t fields[MAVLINK_MAX_FIELDS]; // field information
} mavlink_message_info_t;
#define _MAV_PAYLOAD(msg) ((const char *)(&((msg)->payload64[0])))
#define _MAV_PAYLOAD_NON_CONST(msg) ((char *)(&((msg)->payload64[0])))
// checksum is immediately after the payload bytes
#define mavlink_ck_a(msg) *((msg)->len + (uint8_t *)_MAV_PAYLOAD_NON_CONST(msg))
#define mavlink_ck_b(msg) *(((msg)->len+(uint16_t)1) + (uint8_t *)_MAV_PAYLOAD_NON_CONST(msg))
typedef enum {
MAVLINK_COMM_0,
MAVLINK_COMM_1,
MAVLINK_COMM_2,
MAVLINK_COMM_3
} mavlink_channel_t;
/*
* applications can set MAVLINK_COMM_NUM_BUFFERS to the maximum number
* of buffers they will use. If more are used, then the result will be
* a stack overrun
*/
#ifndef MAVLINK_COMM_NUM_BUFFERS
#if (defined linux) | (defined __linux) | (defined __MACH__) | (defined _WIN32)
# define MAVLINK_COMM_NUM_BUFFERS 16
#else
# define MAVLINK_COMM_NUM_BUFFERS 4
#endif
#endif
typedef enum {
MAVLINK_PARSE_STATE_UNINIT=0,
MAVLINK_PARSE_STATE_IDLE,
MAVLINK_PARSE_STATE_GOT_STX,
MAVLINK_PARSE_STATE_GOT_SEQ,
MAVLINK_PARSE_STATE_GOT_LENGTH,
MAVLINK_PARSE_STATE_GOT_SYSID,
MAVLINK_PARSE_STATE_GOT_COMPID,
MAVLINK_PARSE_STATE_GOT_MSGID,
MAVLINK_PARSE_STATE_GOT_PAYLOAD,
MAVLINK_PARSE_STATE_GOT_CRC1
} mavlink_parse_state_t; ///< The state machine for the comm parser
typedef struct __mavlink_status {
uint8_t msg_received; ///< Number of received messages
uint8_t buffer_overrun; ///< Number of buffer overruns
uint8_t parse_error; ///< Number of parse errors
mavlink_parse_state_t parse_state; ///< Parsing state machine
uint8_t packet_idx; ///< Index in current packet
uint8_t current_rx_seq; ///< Sequence number of last packet received
uint8_t current_tx_seq; ///< Sequence number of last packet sent
uint16_t packet_rx_success_count; ///< Received packets
uint16_t packet_rx_drop_count; ///< Number of packet drops
} mavlink_status_t;
#define MAVLINK_BIG_ENDIAN 0
#define MAVLINK_LITTLE_ENDIAN 1
#endif /* MAVLINK_TYPES_H_ */
