Add STM32F4 discovery config.

21 files changed, 2397 insertions, 4 deletions

diff --git a/Images/px4-stm32f4discovery.prototype b/Images/px4-stm32f4discovery.prototype
new file mode 100644
index 000000000..9250691f7
--- /dev/null
+++ b/Images/px4-stm32f4discovery.prototype
@@ -0,0 +1,12 @@
+{
+    "board_id": 99, 
+    "magic": "PX4FWv1", 
+    "description": "Firmware for the STM32F4Discovery board", 
+    "image": "", 
+    "build_time": 0, 
+    "summary": "PX4/STM32F4Discovery",
+    "version": "0.1",
+    "image_size": 0,
+    "git_identity": "",
+    "board_revision": 0
+}
diff --git a/makefiles/board_px4-stm32f4discovery.mk b/makefiles/board_px4-stm32f4discovery.mk
new file mode 100644
index 000000000..fe761ba44
--- /dev/null
+++ b/makefiles/board_px4-stm32f4discovery.mk
@@ -0,0 +1,11 @@
+#
+# Board-specific definitions for the PX4_STM32F4DISCOVERY
+#
+
+#
+# Configure the toolchain
+#
+CONFIG_ARCH			 = CORTEXM4F
+CONFIG_BOARD			 = PX4_STM32F4DISCOVERY
+
+include $(PX4_MK_DIR)/toolchain_gnu-arm-eabi.mk
diff --git a/makefiles/config_px4-stm32f4discovery_default.mk b/makefiles/config_px4-stm32f4discovery_default.mk
new file mode 100644
index 000000000..8f73a7f04
--- /dev/null
+++ b/makefiles/config_px4-stm32f4discovery_default.mk
@@ -0,0 +1,92 @@
+#
+# Makefile for the px4fmu_default configuration
+#
+
+#
+# Use the configuration's ROMFS, copy the PX4_STM32F4DISCOVERY firmware into
+# the ROMFS if it's available
+#
+ROMFS_ROOT	 = $(PX4_BASE)/ROMFS/px4fmu_common
+ROMFS_OPTIONAL_FILES = 
+
+#
+# Board support modules
+#
+MODULES		+= drivers/device
+MODULES		+= drivers/stm32
+MODULES		+= drivers/led
+MODULES		+= drivers/boards/px4-stm32f4discovery
+
+#
+# System commands
+#
+MODULES		+= systemcmds/bl_update
+MODULES		+= systemcmds/mixer
+MODULES		+= systemcmds/param
+MODULES		+= systemcmds/perf
+MODULES		+= systemcmds/reboot
+MODULES		+= systemcmds/top
+MODULES		+= systemcmds/tests
+MODULES		+= systemcmds/config
+MODULES		+= systemcmds/nshterm
+MODULES		+= systemcmds/ver
+
+#
+# Library modules
+#
+MODULES		+= modules/systemlib
+MODULES		+= modules/systemlib/mixer
+MODULES		+= modules/controllib
+MODULES		+= modules/uORB
+
+#
+# Libraries
+#
+LIBRARIES	+= lib/mathlib/CMSIS
+MODULES		+= lib/mathlib
+MODULES		+= lib/mathlib/math/filter
+MODULES		+= lib/ecl
+MODULES		+= lib/external_lgpl
+MODULES		+= lib/geo
+MODULES		+= lib/conversion
+MODULES		+= platforms/nuttx
+
+#
+# Demo apps
+#
+#MODULES		+= examples/math_demo
+# Tutorial code from
+# https://pixhawk.ethz.ch/px4/dev/hello_sky
+MODULES		+= examples/px4_simple_app
+
+# Tutorial code from
+# https://pixhawk.ethz.ch/px4/dev/daemon
+#MODULES		+= examples/px4_daemon_app
+
+# Tutorial code from
+# https://pixhawk.ethz.ch/px4/dev/debug_values
+#MODULES		+= examples/px4_mavlink_debug
+
+# Tutorial code from
+# https://pixhawk.ethz.ch/px4/dev/example_fixedwing_control
+#MODULES			+= examples/fixedwing_control
+
+# Hardware test
+#MODULES			+= examples/hwtest
+
+#
+# Transitional support - add commands from the NuttX export archive.
+#
+# In general, these should move to modules over time.
+#
+# Each entry here is <command>.<priority>.<stacksize>.<entrypoint> but we use a helper macro
+# to make the table a bit more readable.
+#
+define _B
+	$(strip $1).$(or $(strip $2),SCHED_PRIORITY_DEFAULT).$(or $(strip $3),CONFIG_PTHREAD_STACK_DEFAULT).$(strip $4)
+endef
+
+#                  command                 priority                   stack  entrypoint
+BUILTIN_COMMANDS := \
+	$(call _B, sercon,                 ,                          2048,  sercon_main                ) \
+	$(call _B, serdis,                 ,                          2048,  serdis_main                )
diff --git a/makefiles/upload.mk b/makefiles/upload.mk
index 29b415688..dd7710bf7 100644
--- a/makefiles/upload.mk
+++ b/makefiles/upload.mk
@@ -33,7 +33,8 @@ upload-serial-px4fmu-v2:	$(BUNDLE) $(UPLOADER)
 upload-serial-aerocore:
 	openocd -f $(PX4_BASE)/makefiles/gumstix-aerocore.cfg -c 'init; reset halt; flash write_image erase $(PX4_BASE)/../Bootloader/px4aerocore_bl.bin 0x08000000; flash write_image erase $(PX4_BASE)/Build/aerocore_default.build/firmware.bin 0x08004000; reset run; exit'
 
-
+upload-serial-px4-stm32f4discovery:	$(BUNDLE) $(UPLOADER)
+	$(Q) $(PYTHON) -u $(UPLOADER) --port $(SERIAL_PORTS) $(BUNDLE)
 
 #
 # JTAG firmware uploading with OpenOCD
diff --git a/nuttx-configs/px4-stm32f4discovery/include/board.h b/nuttx-configs/px4-stm32f4discovery/include/board.h
new file mode 100644
index 000000000..0412c3aa6
--- /dev/null
+++ b/nuttx-configs/px4-stm32f4discovery/include/board.h
@@ -0,0 +1,273 @@
+/************************************************************************************
+ * configs/stm32f4discovery/include/board.h
+ * include/arch/board/board.h
+ *
+ *   Copyright (C) 2012 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+#ifndef __CONFIG_PX4FMU_V1_INCLUDE_BOARD_H
+#define __CONFIG_PX4FMU_V1_INCLUDE_BOARD_H
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+
+#ifndef __ASSEMBLY__
+# include <stdint.h>
+#endif
+
+#include "stm32_rcc.h"
+#include "stm32_sdio.h"
+#include "stm32.h"
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+
+/* Clocking *************************************************************************/
+/* The STM32F4 Discovery board features a single 8MHz crystal.  Space is provided
+ * for a 32kHz RTC backup crystal, but it is not stuffed.
+ *
+ * This is the canonical configuration:
+ *   System Clock source           : PLL (HSE)
+ *   SYSCLK(Hz)                    : 168000000    Determined by PLL configuration
+ *   HCLK(Hz)                      : 168000000    (STM32_RCC_CFGR_HPRE)
+ *   AHB Prescaler                 : 1            (STM32_RCC_CFGR_HPRE)
+ *   APB1 Prescaler                : 4            (STM32_RCC_CFGR_PPRE1)
+ *   APB2 Prescaler                : 2            (STM32_RCC_CFGR_PPRE2)
+ *   HSE Frequency(Hz)             : 8000000      (STM32_BOARD_XTAL)
+ *   PLLM                          : 8            (STM32_PLLCFG_PLLM)
+ *   PLLN                          : 336          (STM32_PLLCFG_PLLN)
+ *   PLLP                          : 2            (STM32_PLLCFG_PLLP)
+ *   PLLQ                          : 7            (STM32_PLLCFG_PLLQ)
+ *   Main regulator output voltage : Scale1 mode  Needed for high speed SYSCLK
+ *   Flash Latency(WS)             : 5
+ *   Prefetch Buffer               : OFF
+ *   Instruction cache             : ON
+ *   Data cache                    : ON
+ *   Require 48MHz for USB OTG FS, : Enabled
+ *   SDIO and RNG clock
+ */
+
+/* HSI - 16 MHz RC factory-trimmed
+ * LSI - 32 KHz RC
+ * HSE - On-board crystal frequency is 8MHz
+ * LSE - 32.768 kHz
+ */
+
+#define STM32_BOARD_XTAL        8000000ul
+
+#define STM32_HSI_FREQUENCY     16000000ul
+#define STM32_LSI_FREQUENCY     32000
+#define STM32_HSE_FREQUENCY     STM32_BOARD_XTAL
+#define STM32_LSE_FREQUENCY     32768
+
+/* Main PLL Configuration.
+ *
+ * PLL source is HSE
+ * PLL_VCO = (STM32_HSE_FREQUENCY / PLLM) * PLLN
+ *         = (8,000,000 / 8) * 336
+ *         = 336,000,000
+ * SYSCLK  = PLL_VCO / PLLP
+ *         = 336,000,000 / 2 = 168,000,000
+ * USB OTG FS, SDIO and RNG Clock
+ *         =  PLL_VCO / PLLQ
+ *         = 48,000,000
+ */
+
+#define STM32_PLLCFG_PLLM       RCC_PLLCFG_PLLM(8)
+#define STM32_PLLCFG_PLLN       RCC_PLLCFG_PLLN(336)
+#define STM32_PLLCFG_PLLP       RCC_PLLCFG_PLLP_2
+#define STM32_PLLCFG_PLLQ       RCC_PLLCFG_PLLQ(7)
+
+#define STM32_SYSCLK_FREQUENCY  168000000ul
+
+/* AHB clock (HCLK) is SYSCLK (168MHz) */
+
+#define STM32_RCC_CFGR_HPRE     RCC_CFGR_HPRE_SYSCLK  /* HCLK  = SYSCLK / 1 */
+#define STM32_HCLK_FREQUENCY    STM32_SYSCLK_FREQUENCY
+#define STM32_BOARD_HCLK        STM32_HCLK_FREQUENCY  /* same as above, to satisfy compiler */
+
+/* APB1 clock (PCLK1) is HCLK/4 (42MHz) */
+
+#define STM32_RCC_CFGR_PPRE1    RCC_CFGR_PPRE1_HCLKd4     /* PCLK1 = HCLK / 4 */
+#define STM32_PCLK1_FREQUENCY   (STM32_HCLK_FREQUENCY/4)
+
+/* Timers driven from APB1 will be twice PCLK1 */
+
+#define STM32_APB1_TIM2_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM3_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM4_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM5_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM6_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM7_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM12_CLKIN  (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM13_CLKIN  (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM14_CLKIN  (2*STM32_PCLK1_FREQUENCY)
+
+/* APB2 clock (PCLK2) is HCLK/2 (84MHz) */
+
+#define STM32_RCC_CFGR_PPRE2    RCC_CFGR_PPRE2_HCLKd2     /* PCLK2 = HCLK / 2 */
+#define STM32_PCLK2_FREQUENCY   (STM32_HCLK_FREQUENCY/2)
+
+/* Timers driven from APB2 will be twice PCLK2 */
+
+#define STM32_APB2_TIM1_CLKIN   (2*STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM8_CLKIN   (2*STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM9_CLKIN   (2*STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM10_CLKIN  (2*STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM11_CLKIN  (2*STM32_PCLK2_FREQUENCY)
+
+/* Timer Frequencies, if APBx is set to 1, frequency is same to APBx
+ * otherwise frequency is 2xAPBx.
+ * Note: TIM1,8 are on APB2, others on APB1
+ */
+
+#define STM32_TIM18_FREQUENCY   (2*STM32_PCLK2_FREQUENCY)
+#define STM32_TIM27_FREQUENCY   (2*STM32_PCLK1_FREQUENCY)
+
+/* LED definitions ******************************************************************/
+/* If CONFIG_ARCH_LEDS is not defined, then the user can control the LEDs in any
+ * way.  The following definitions are used to access individual LEDs.
+ */
+
+/* LED index values for use with stm32_setled() */
+
+#define BOARD_LED1        0
+#define BOARD_LED2        1
+#define BOARD_NLEDS       2
+
+#define BOARD_LED_BLUE    BOARD_LED1
+#define BOARD_LED_RED     BOARD_LED2
+
+/* LED bits for use with stm32_setleds() */
+
+#define BOARD_LED1_BIT    (1 << BOARD_LED1)
+#define BOARD_LED2_BIT    (1 << BOARD_LED2)
+
+/* If CONFIG_ARCH_LEDs is defined, then NuttX will control the 2 LEDs on board the
+ * px4fmu-v1.  The following definitions describe how NuttX controls the LEDs:
+ */
+
+#define LED_STARTED       0  /* LED1 */
+#define LED_HEAPALLOCATE  1  /* LED2 */
+#define LED_IRQSENABLED   2  /* LED1 */
+#define LED_STACKCREATED  3  /* LED1 + LED2 */
+#define LED_INIRQ         4  /* LED1 */
+#define LED_SIGNAL        5  /* LED2 */
+#define LED_ASSERTION     6  /* LED1 + LED2 */
+#define LED_PANIC         7  /* LED1 + LED2 */
+
+/* Alternate function pin selections ************************************************/
+
+/* UART2:
+ *
+ * The STM32F4 Discovery has no on-board serial devices, but the console is
+ * brought out to PA2 (TX) and PA3 (RX) for connection to an external serial device.
+ * (See the README.txt file for other options)
+ */
+
+#define GPIO_USART2_RX GPIO_USART2_RX_1
+#define GPIO_USART2_TX GPIO_USART2_TX_1
+ 
+/* SPI - There is a MEMS device on SPI1 using these pins: */
+
+#define GPIO_SPI1_MISO GPIO_SPI1_MISO_1
+#define GPIO_SPI1_MOSI GPIO_SPI1_MOSI_1
+#define GPIO_SPI1_SCK  GPIO_SPI1_SCK_1
+
+/*
+ * I2C
+ *
+ * The optional _GPIO configurations allow the I2C driver to manually
+ * reset the bus to clear stuck slaves.  They match the pin configuration,
+ * but are normally-high GPIOs.
+ */
+#define GPIO_I2C1_SCL		GPIO_I2C1_SCL_1
+#define GPIO_I2C1_SDA		GPIO_I2C1_SDA_2
+#define GPIO_I2C1_SCL_GPIO	(GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN6)
+#define GPIO_I2C1_SDA_GPIO	(GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN9)
+
+/************************************************************************************
+ * Public Data
+ ************************************************************************************/
+
+#ifndef __ASSEMBLY__
+
+#undef EXTERN
+#if defined(__cplusplus)
+#define EXTERN extern "C"
+extern "C" {
+#else
+#define EXTERN extern
+#endif
+
+/************************************************************************************
+ * Public Function Prototypes
+ ************************************************************************************/
+/************************************************************************************
+ * Name: stm32_boardinitialize
+ *
+ * Description:
+ *   All STM32 architectures must provide the following entry point.  This entry point
+ *   is called early in the intitialization -- after all memory has been configured
+ *   and mapped but before any devices have been initialized.
+ *
+ ************************************************************************************/
+
+EXTERN void stm32_boardinitialize(void);
+
+/************************************************************************************
+ * Name:  stm32_ledinit, stm32_setled, and stm32_setleds
+ *
+ * Description:
+ *   If CONFIG_ARCH_LEDS is defined, then NuttX will control the on-board LEDs.  If
+ *   CONFIG_ARCH_LEDS is not defined, then the following interfacesare available to
+ *   control the LEDs from user applications.
+ *
+ ************************************************************************************/
+
+#ifndef CONFIG_ARCH_LEDS
+EXTERN void stm32_ledinit(void);
+EXTERN void stm32_setled(int led, bool ledon);
+EXTERN void stm32_setleds(uint8_t ledset);
+#endif
+
+#undef EXTERN
+#if defined(__cplusplus)
+}
+#endif
+
+#endif /* __ASSEMBLY__ */
+#endif  /* __CONFIG_PX4FMU_V1_INCLUDE_BOARD_H */
diff --git a/nuttx-configs/px4-stm32f4discovery/include/nsh_romfsimg.h b/nuttx-configs/px4-stm32f4discovery/include/nsh_romfsimg.h
new file mode 100644
index 000000000..15e4e7a8d
--- /dev/null
+++ b/nuttx-configs/px4-stm32f4discovery/include/nsh_romfsimg.h
@@ -0,0 +1,42 @@
+/****************************************************************************
+ *
+ *   Copyright (C) 2013 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * nsh_romfsetc.h
+ *
+ * This file is a stub for 'make export' purposes; the actual ROMFS
+ * must be supplied by the library client.
+ */
+
+extern unsigned char romfs_img[];
+extern unsigned int romfs_img_len;
diff --git a/nuttx-configs/px4-stm32f4discovery/nsh/Make.defs b/nuttx-configs/px4-stm32f4discovery/nsh/Make.defs
new file mode 100644
index 000000000..e70320aaa
--- /dev/null
+++ b/nuttx-configs/px4-stm32f4discovery/nsh/Make.defs
@@ -0,0 +1,179 @@
+############################################################################
+# configs/px4fmu-v2/nsh/Make.defs
+#
+#   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+include ${TOPDIR}/.config
+include ${TOPDIR}/tools/Config.mk
+
+#
+# We only support building with the ARM bare-metal toolchain from
+# https://launchpad.net/gcc-arm-embedded on Windows, Linux or Mac OS.
+#
+CONFIG_ARMV7M_TOOLCHAIN	:= GNU_EABI
+
+include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
+
+CC			 = $(CROSSDEV)gcc
+CXX			 = $(CROSSDEV)g++
+CPP			 = $(CROSSDEV)gcc -E
+LD			 = $(CROSSDEV)ld
+AR			 = $(CROSSDEV)ar rcs
+NM			 = $(CROSSDEV)nm
+OBJCOPY			 = $(CROSSDEV)objcopy
+OBJDUMP			 = $(CROSSDEV)objdump
+
+MAXOPTIMIZATION		 = -O3
+ARCHCPUFLAGS		 = -mcpu=cortex-m4 \
+			   -mthumb \
+			   -march=armv7e-m \
+			   -mfpu=fpv4-sp-d16 \
+			   -mfloat-abi=hard
+
+
+# enable precise stack overflow tracking
+INSTRUMENTATIONDEFINES	 = -finstrument-functions \
+			   -ffixed-r10
+
+# pull in *just* libm from the toolchain ... this is grody
+LIBM			 = "${shell $(CC) $(ARCHCPUFLAGS) -print-file-name=libm.a}"
+EXTRA_LIBS		+= $(LIBM)
+
+# use our linker script
+LDSCRIPT		 = ld.script
+
+ifeq ($(WINTOOL),y)
+  # Windows-native toolchains
+  DIRLINK		 = $(TOPDIR)/tools/copydir.sh
+  DIRUNLINK		 = $(TOPDIR)/tools/unlink.sh
+  MKDEP			 = $(TOPDIR)/tools/mknulldeps.sh
+  ARCHINCLUDES		 = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
+  ARCHXXINCLUDES	 = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
+  ARCHSCRIPT		 = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
+else
+  ifeq ($(PX4_WINTOOL),y)
+    # Windows-native toolchains (MSYS)
+    DIRLINK		 = $(TOPDIR)/tools/copydir.sh
+    DIRUNLINK		 = $(TOPDIR)/tools/unlink.sh
+    MKDEP		 = $(TOPDIR)/tools/mknulldeps.sh
+    ARCHINCLUDES	 = -I. -isystem $(TOPDIR)/include
+    ARCHXXINCLUDES	 = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
+    ARCHSCRIPT		 = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
+  else
+    # Linux/Cygwin-native toolchain 
+    MKDEP		 = $(TOPDIR)/tools/mkdeps.sh
+    ARCHINCLUDES	 = -I. -isystem $(TOPDIR)/include
+    ARCHXXINCLUDES	 = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
+    ARCHSCRIPT		 = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
+  endif
+endif
+
+# tool versions
+ARCHCCVERSION		 = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
+ARCHCCMAJOR		 = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
+
+# optimisation flags
+ARCHOPTIMIZATION	 = $(MAXOPTIMIZATION) \
+			   -fno-strict-aliasing \
+			   -fno-strength-reduce \
+			   -fomit-frame-pointer \
+   			   -funsafe-math-optimizations \
+   			   -fno-builtin-printf \
+   			   -ffunction-sections \
+   			   -fdata-sections
+
+ifeq ("${CONFIG_DEBUG_SYMBOLS}","y")
+ARCHOPTIMIZATION	+= -g
+endif
+
+ARCHCFLAGS		 = -std=gnu99
+ARCHCXXFLAGS		 = -fno-exceptions -fno-rtti -std=gnu++0x
+ARCHWARNINGS		 = -Wall \
+			   -Wextra \
+			   -Wdouble-promotion \
+			   -Wshadow \
+			   -Wfloat-equal \
+			   -Wframe-larger-than=1024 \
+			   -Wpointer-arith \
+			   -Wlogical-op \
+			   -Wmissing-declarations \
+			   -Wpacked \
+			   -Wno-unused-parameter
+#   -Wcast-qual  - generates spurious noreturn attribute warnings, try again later
+#   -Wconversion - would be nice, but too many "risky-but-safe" conversions in the code
+#   -Wcast-align - would help catch bad casts in some cases, but generates too many false positives
+
+ARCHCWARNINGS		 = $(ARCHWARNINGS) \
+			   -Wbad-function-cast \
+			   -Wstrict-prototypes \
+			   -Wold-style-declaration \
+			   -Wmissing-parameter-type \
+			   -Wmissing-prototypes \
+			   -Wnested-externs \
+			   -Wunsuffixed-float-constants
+ARCHWARNINGSXX		 = $(ARCHWARNINGS) \
+			   -Wno-psabi
+ARCHDEFINES		 =
+ARCHPICFLAGS		 = -fpic -msingle-pic-base -mpic-register=r10
+
+# this seems to be the only way to add linker flags
+EXTRA_LIBS		+= --warn-common \
+			   --gc-sections
+
+CFLAGS			 = $(ARCHCFLAGS) $(ARCHCWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(INSTRUMENTATIONDEFINES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe -fno-common
+CPICFLAGS		 = $(ARCHPICFLAGS) $(CFLAGS)
+CXXFLAGS		 = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(INSTRUMENTATIONDEFINES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CXXPICFLAGS		 = $(ARCHPICFLAGS) $(CXXFLAGS)
+CPPFLAGS		 = $(ARCHINCLUDES) $(INSTRUMENTATIONDEFINES) $(ARCHDEFINES) $(EXTRADEFINES)
+AFLAGS			 = $(CFLAGS) -D__ASSEMBLY__
+
+NXFLATLDFLAGS1		 = -r -d -warn-common
+NXFLATLDFLAGS2		 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat.ld -no-check-sections
+LDNXFLATFLAGS		 = -e main -s 2048
+
+OBJEXT			 = .o
+LIBEXT			 = .a
+EXEEXT			 =
+
+
+# produce partially-linked $1 from files in $2
+define PRELINK
+	@echo "PRELINK: $1"
+	$(Q) $(LD) -Ur -o $1 $2 && $(OBJCOPY) --localize-hidden $1
+endef
+
+HOSTCC			 = gcc
+HOSTINCLUDES		 = -I.
+HOSTCFLAGS		 = -Wall -Wstrict-prototypes -Wshadow -g -pipe
+HOSTLDFLAGS		 =
+
diff --git a/nuttx-configs/px4-stm32f4discovery/nsh/appconfig b/nuttx-configs/px4-stm32f4discovery/nsh/appconfig
new file mode 100644
index 000000000..f14ab4044
--- /dev/null
+++ b/nuttx-configs/px4-stm32f4discovery/nsh/appconfig
@@ -0,0 +1,48 @@
+############################################################################
+# configs/px4fmu/nsh/appconfig
+#
+#   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+# Path to example in apps/examples containing the user_start entry point
+
+CONFIGURED_APPS	+= examples/nsh
+
+# The NSH application library
+CONFIGURED_APPS += nshlib
+CONFIGURED_APPS += system/readline
+
+#ifeq ($(CONFIG_USBDEV),y)
+#ifeq ($(CONFIG_CDCACM),y)
+CONFIGURED_APPS += examples/cdcacm
+#endif
+#endif
diff --git a/nuttx-configs/px4-stm32f4discovery/nsh/defconfig b/nuttx-configs/px4-stm32f4discovery/nsh/defconfig
new file mode 100644
index 000000000..8398c5380
--- /dev/null
+++ b/nuttx-configs/px4-stm32f4discovery/nsh/defconfig
@@ -0,0 +1,897 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Nuttx/ Configuration
+#
+CONFIG_NUTTX_NEWCONFIG=y
+
+#
+# Build Setup
+#
+# CONFIG_EXPERIMENTAL is not set
+# CONFIG_HOST_LINUX is not set
+CONFIG_HOST_OSX=y
+# CONFIG_HOST_WINDOWS is not set
+# CONFIG_HOST_OTHER is not set
+
+#
+# Build Configuration
+#
+CONFIG_APPS_DIR="../apps"
+# CONFIG_BUILD_2PASS is not set
+
+#
+# Binary Output Formats
+#
+# CONFIG_RRLOAD_BINARY is not set
+# CONFIG_INTELHEX_BINARY is not set
+# CONFIG_MOTOROLA_SREC is not set
+CONFIG_RAW_BINARY=y
+
+#
+# Customize Header Files
+#
+# CONFIG_ARCH_STDBOOL_H is not set
+CONFIG_ARCH_MATH_H=y
+# CONFIG_ARCH_FLOAT_H is not set
+# CONFIG_ARCH_STDARG_H is not set
+
+#
+# Debug Options
+#
+# CONFIG_DEBUG is not set
+CONFIG_DEBUG_SYMBOLS=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_8051 is not set
+CONFIG_ARCH_ARM=y
+# CONFIG_ARCH_AVR is not set
+# CONFIG_ARCH_HC is not set
+# CONFIG_ARCH_MIPS is not set
+# CONFIG_ARCH_RGMP is not set
+# CONFIG_ARCH_SH is not set
+# CONFIG_ARCH_SIM is not set
+# CONFIG_ARCH_X86 is not set
+# CONFIG_ARCH_Z16 is not set
+# CONFIG_ARCH_Z80 is not set
+CONFIG_ARCH="arm"
+
+#
+# ARM Options
+#
+# CONFIG_ARCH_CHIP_C5471 is not set
+# CONFIG_ARCH_CHIP_CALYPSO is not set
+# CONFIG_ARCH_CHIP_DM320 is not set
+# CONFIG_ARCH_CHIP_IMX is not set
+# CONFIG_ARCH_CHIP_KINETIS is not set
+# CONFIG_ARCH_CHIP_KL is not set
+# CONFIG_ARCH_CHIP_LM is not set
+# CONFIG_ARCH_CHIP_LPC17XX is not set
+# CONFIG_ARCH_CHIP_LPC214X is not set
+# CONFIG_ARCH_CHIP_LPC2378 is not set
+# CONFIG_ARCH_CHIP_LPC31XX is not set
+# CONFIG_ARCH_CHIP_LPC43XX is not set
+# CONFIG_ARCH_CHIP_NUC1XX is not set
+# CONFIG_ARCH_CHIP_SAM34 is not set
+CONFIG_ARCH_CHIP_STM32=y
+# CONFIG_ARCH_CHIP_STR71X is not set
+CONFIG_ARCH_CORTEXM4=y
+CONFIG_ARCH_FAMILY="armv7-m"
+CONFIG_ARCH_CHIP="stm32"
+CONFIG_ARMV7M_USEBASEPRI=y
+CONFIG_ARCH_HAVE_CMNVECTOR=y
+CONFIG_ARMV7M_CMNVECTOR=y
+CONFIG_ARCH_HAVE_FPU=y
+CONFIG_ARCH_FPU=y
+CONFIG_ARCH_HAVE_MPU=y
+# CONFIG_ARMV7M_MPU is not set
+
+#
+# ARMV7M Configuration Options
+#
+# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set
+CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI=y
+CONFIG_ARMV7M_STACKCHECK=y
+CONFIG_SERIAL_TERMIOS=y
+
+#
+# STM32 Configuration Options
+#
+# CONFIG_ARCH_CHIP_STM32L151C6 is not set
+# CONFIG_ARCH_CHIP_STM32L151C8 is not set
+# CONFIG_ARCH_CHIP_STM32L151CB is not set
+# CONFIG_ARCH_CHIP_STM32L151R6 is not set
+# CONFIG_ARCH_CHIP_STM32L151R8 is not set
+# CONFIG_ARCH_CHIP_STM32L151RB is not set
+# CONFIG_ARCH_CHIP_STM32L151V6 is not set
+# CONFIG_ARCH_CHIP_STM32L151V8 is not set
+# CONFIG_ARCH_CHIP_STM32L151VB is not set
+# CONFIG_ARCH_CHIP_STM32L152C6 is not set
+# CONFIG_ARCH_CHIP_STM32L152C8 is not set
+# CONFIG_ARCH_CHIP_STM32L152CB is not set
+# CONFIG_ARCH_CHIP_STM32L152R6 is not set
+# CONFIG_ARCH_CHIP_STM32L152R8 is not set
+# CONFIG_ARCH_CHIP_STM32L152RB is not set
+# CONFIG_ARCH_CHIP_STM32L152V6 is not set
+# CONFIG_ARCH_CHIP_STM32L152V8 is not set
+# CONFIG_ARCH_CHIP_STM32L152VB is not set
+# CONFIG_ARCH_CHIP_STM32F100C8 is not set
+# CONFIG_ARCH_CHIP_STM32F100CB is not set
+# CONFIG_ARCH_CHIP_STM32F100R8 is not set
+# CONFIG_ARCH_CHIP_STM32F100RB is not set
+# CONFIG_ARCH_CHIP_STM32F100RC is not set
+# CONFIG_ARCH_CHIP_STM32F100RD is not set
+# CONFIG_ARCH_CHIP_STM32F100RE is not set
+# CONFIG_ARCH_CHIP_STM32F100V8 is not set
+# CONFIG_ARCH_CHIP_STM32F100VB is not set
+# CONFIG_ARCH_CHIP_STM32F100VC is not set
+# CONFIG_ARCH_CHIP_STM32F100VD is not set
+# CONFIG_ARCH_CHIP_STM32F100VE is not set
+# CONFIG_ARCH_CHIP_STM32F103C4 is not set
+# CONFIG_ARCH_CHIP_STM32F103C8 is not set
+# CONFIG_ARCH_CHIP_STM32F103RET6 is not set
+# CONFIG_ARCH_CHIP_STM32F103VCT6 is not set
+# CONFIG_ARCH_CHIP_STM32F103VET6 is not set
+# CONFIG_ARCH_CHIP_STM32F103ZET6 is not set
+# CONFIG_ARCH_CHIP_STM32F105VBT7 is not set
+# CONFIG_ARCH_CHIP_STM32F107VC is not set
+# CONFIG_ARCH_CHIP_STM32F207IG is not set
+# CONFIG_ARCH_CHIP_STM32F302CB is not set
+# CONFIG_ARCH_CHIP_STM32F302CC is not set
+# CONFIG_ARCH_CHIP_STM32F302RB is not set
+# CONFIG_ARCH_CHIP_STM32F302RC is not set
+# CONFIG_ARCH_CHIP_STM32F302VB is not set
+# CONFIG_ARCH_CHIP_STM32F302VC is not set
+# CONFIG_ARCH_CHIP_STM32F303CB is not set
+# CONFIG_ARCH_CHIP_STM32F303CC is not set
+# CONFIG_ARCH_CHIP_STM32F303RB is not set
+# CONFIG_ARCH_CHIP_STM32F303RC is not set
+# CONFIG_ARCH_CHIP_STM32F303VB is not set
+# CONFIG_ARCH_CHIP_STM32F303VC is not set
+# CONFIG_ARCH_CHIP_STM32F405RG is not set
+# CONFIG_ARCH_CHIP_STM32F405VG is not set
+# CONFIG_ARCH_CHIP_STM32F405ZG is not set
+# CONFIG_ARCH_CHIP_STM32F407VE is not set
+CONFIG_ARCH_CHIP_STM32F407VG=y
+# CONFIG_ARCH_CHIP_STM32F407ZE is not set
+# CONFIG_ARCH_CHIP_STM32F407ZG is not set
+# CONFIG_ARCH_CHIP_STM32F407IE is not set
+# CONFIG_ARCH_CHIP_STM32F407IG is not set
+# CONFIG_ARCH_CHIP_STM32F427V is not set
+# CONFIG_ARCH_CHIP_STM32F427Z is not set
+# CONFIG_ARCH_CHIP_STM32F427I is not set
+# CONFIG_STM32_STM32L15XX is not set
+# CONFIG_STM32_ENERGYLITE is not set
+# CONFIG_STM32_STM32F10XX is not set
+# CONFIG_STM32_VALUELINE is not set
+# CONFIG_STM32_CONNECTIVITYLINE is not set
+# CONFIG_STM32_PERFORMANCELINE is not set
+# CONFIG_STM32_HIGHDENSITY is not set
+# CONFIG_STM32_MEDIUMDENSITY is not set
+# CONFIG_STM32_LOWDENSITY is not set
+# CONFIG_STM32_STM32F20XX is not set
+# CONFIG_STM32_STM32F30XX is not set
+CONFIG_STM32_STM32F40XX=y
+# CONFIG_STM32_STM32F427 is not set
+# CONFIG_STM32_DFU is not set
+
+#
+# STM32 Peripheral Support
+#
+CONFIG_STM32_ADC1=y
+# CONFIG_STM32_ADC2 is not set
+# CONFIG_STM32_ADC3 is not set
+CONFIG_STM32_BKPSRAM=y
+# CONFIG_STM32_CAN1 is not set
+# CONFIG_STM32_CAN2 is not set
+CONFIG_STM32_CCMDATARAM=y
+# CONFIG_STM32_CRC is not set
+# CONFIG_STM32_CRYP is not set
+CONFIG_STM32_DMA1=y
+CONFIG_STM32_DMA2=y
+# CONFIG_STM32_DAC1 is not set
+# CONFIG_STM32_DAC2 is not set
+# CONFIG_STM32_DCMI is not set
+# CONFIG_STM32_ETHMAC is not set
+# CONFIG_STM32_FSMC is not set
+# CONFIG_STM32_HASH is not set
+CONFIG_STM32_I2C1=y
+# CONFIG_STM32_I2C2 is not set
+# CONFIG_STM32_I2C3 is not set
+CONFIG_STM32_OTGFS=y
+# CONFIG_STM32_OTGHS is not set
+CONFIG_STM32_PWR=y
+# CONFIG_STM32_RNG is not set
+# CONFIG_STM32_SDIO is not set
+CONFIG_STM32_SPI1=y
+# CONFIG_STM32_SPI2 is not set
+# CONFIG_STM32_SPI3 is not set
+# CONFIG_STM32_SPI4 is not set
+# CONFIG_STM32_SPI5 is not set
+# CONFIG_STM32_SPI6 is not set
+CONFIG_STM32_SYSCFG=y
+CONFIG_STM32_TIM1=y
+# CONFIG_STM32_TIM2 is not set
+CONFIG_STM32_TIM3=y
+CONFIG_STM32_TIM4=y
+# CONFIG_STM32_TIM5 is not set
+# CONFIG_STM32_TIM6 is not set
+# CONFIG_STM32_TIM7 is not set
+# CONFIG_STM32_TIM8 is not set
+CONFIG_STM32_TIM9=y
+CONFIG_STM32_TIM10=y
+CONFIG_STM32_TIM11=y
+# CONFIG_STM32_TIM12 is not set
+# CONFIG_STM32_TIM13 is not set
+# CONFIG_STM32_TIM14 is not set
+# CONFIG_STM32_USART1 is not set
+CONFIG_STM32_USART2=y
+# CONFIG_STM32_USART3 is not set
+# CONFIG_STM32_UART4 is not set
+# CONFIG_STM32_UART5 is not set
+# CONFIG_STM32_USART6 is not set
+# CONFIG_STM32_UART7 is not set
+# CONFIG_STM32_UART8 is not set
+# CONFIG_STM32_IWDG is not set
+# CONFIG_STM32_WWDG is not set
+CONFIG_STM32_ADC=y
+CONFIG_STM32_SPI=y
+CONFIG_STM32_I2C=y
+
+#
+# Alternate Pin Mapping
+#
+CONFIG_STM32_FLASH_PREFETCH=y
+# CONFIG_STM32_JTAG_DISABLE is not set
+# CONFIG_STM32_JTAG_FULL_ENABLE is not set
+# CONFIG_STM32_JTAG_NOJNTRST_ENABLE is not set
+CONFIG_STM32_JTAG_SW_ENABLE=y
+CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG=y
+# CONFIG_STM32_FORCEPOWER is not set
+# CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG is not set
+# CONFIG_STM32_CCMEXCLUDE is not set
+CONFIG_STM32_DMACAPABLE=y
+# CONFIG_STM32_TIM1_PWM is not set
+# CONFIG_STM32_TIM3_PWM is not set
+# CONFIG_STM32_TIM4_PWM is not set
+# CONFIG_STM32_TIM9_PWM is not set
+# CONFIG_STM32_TIM10_PWM is not set
+# CONFIG_STM32_TIM11_PWM is not set
+# CONFIG_STM32_TIM1_ADC is not set
+# CONFIG_STM32_TIM3_ADC is not set
+# CONFIG_STM32_TIM4_ADC is not set
+CONFIG_STM32_USART=y
+
+#
+# U[S]ART Configuration
+#
+# CONFIG_USART2_RS485 is not set
+CONFIG_USART2_RXDMA=y
+CONFIG_SERIAL_DISABLE_REORDERING=y
+CONFIG_STM32_USART_SINGLEWIRE=y
+
+#
+# SPI Configuration
+#
+# CONFIG_STM32_SPI_INTERRUPTS is not set
+# CONFIG_STM32_SPI_DMA is not set
+
+#
+# I2C Configuration
+#
+# CONFIG_STM32_I2C_DYNTIMEO is not set
+CONFIG_STM32_I2CTIMEOSEC=0
+CONFIG_STM32_I2CTIMEOMS=500
+CONFIG_STM32_I2CTIMEOTICKS=500
+# CONFIG_STM32_I2C_DUTY16_9 is not set
+
+#
+# USB Host Configuration
+#
+
+#
+# USB Device Configuration
+#
+
+#
+# External Memory Configuration
+#
+
+#
+# Architecture Options
+#
+# CONFIG_ARCH_NOINTC is not set
+# CONFIG_ARCH_VECNOTIRQ is not set
+CONFIG_ARCH_DMA=y
+CONFIG_ARCH_IRQPRIO=y
+# CONFIG_CUSTOM_STACK is not set
+# CONFIG_ADDRENV is not set
+CONFIG_ARCH_HAVE_VFORK=y
+CONFIG_ARCH_STACKDUMP=y
+# CONFIG_ENDIAN_BIG is not set
+# CONFIG_ARCH_HAVE_RAMFUNCS is not set
+CONFIG_ARCH_HAVE_RAMVECTORS=y
+# CONFIG_ARCH_RAMVECTORS is not set
+
+#
+# Board Settings
+#
+CONFIG_BOARD_LOOPSPERMSEC=16717
+# CONFIG_ARCH_CALIBRATION is not set
+CONFIG_DRAM_START=0x20000000
+CONFIG_DRAM_SIZE=196608
+CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
+CONFIG_ARCH_INTERRUPTSTACK=4096
+
+#
+# Boot options
+#
+# CONFIG_BOOT_RUNFROMEXTSRAM is not set
+CONFIG_BOOT_RUNFROMFLASH=y
+# CONFIG_BOOT_RUNFROMISRAM is not set
+# CONFIG_BOOT_RUNFROMSDRAM is not set
+# CONFIG_BOOT_COPYTORAM is not set
+
+#
+# Board Selection
+#
+CONFIG_ARCH_BOARD_CUSTOM=y
+CONFIG_ARCH_BOARD=""
+
+#
+# Common Board Options
+#
+CONFIG_NSH_MMCSDMINOR=0
+
+#
+# Board-Specific Options
+#
+
+#
+# RTOS Features
+#
+# CONFIG_BOARD_INITIALIZE is not set
+CONFIG_MSEC_PER_TICK=1
+CONFIG_RR_INTERVAL=0
+CONFIG_SCHED_INSTRUMENTATION=y
+CONFIG_TASK_NAME_SIZE=24
+# CONFIG_SCHED_HAVE_PARENT is not set
+# CONFIG_JULIAN_TIME is not set
+CONFIG_START_YEAR=1970
+CONFIG_START_MONTH=1
+CONFIG_START_DAY=1
+CONFIG_DEV_CONSOLE=y
+# CONFIG_MUTEX_TYPES is not set
+CONFIG_PRIORITY_INHERITANCE=y
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=8
+# CONFIG_FDCLONE_DISABLE is not set
+CONFIG_FDCLONE_STDIO=y
+CONFIG_SDCLONE_DISABLE=y
+CONFIG_SCHED_WAITPID=y
+# CONFIG_SCHED_STARTHOOK is not set
+CONFIG_SCHED_ATEXIT=y
+CONFIG_SCHED_ATEXIT_MAX=1
+# CONFIG_SCHED_ONEXIT is not set
+CONFIG_USER_ENTRYPOINT="nsh_main"
+# CONFIG_DISABLE_OS_API is not set
+
+#
+# Signal Numbers
+#
+CONFIG_SIG_SIGUSR1=1
+CONFIG_SIG_SIGUSR2=2
+CONFIG_SIG_SIGALARM=3
+CONFIG_SIG_SIGCONDTIMEDOUT=16
+CONFIG_SIG_SIGWORK=4
+
+#
+# Sizes of configurable things (0 disables)
+#
+CONFIG_MAX_TASKS=32
+CONFIG_MAX_TASK_ARGS=10
+CONFIG_NPTHREAD_KEYS=4
+CONFIG_NFILE_DESCRIPTORS=32
+CONFIG_NFILE_STREAMS=8
+CONFIG_NAME_MAX=32
+CONFIG_PREALLOC_MQ_MSGS=4
+CONFIG_MQ_MAXMSGSIZE=32
+CONFIG_MAX_WDOGPARMS=2
+CONFIG_PREALLOC_WDOGS=50
+CONFIG_PREALLOC_TIMERS=50
+
+#
+# Stack and heap information
+#
+CONFIG_IDLETHREAD_STACKSIZE=6000
+CONFIG_USERMAIN_STACKSIZE=4096
+CONFIG_PTHREAD_STACK_MIN=512
+CONFIG_PTHREAD_STACK_DEFAULT=2048
+
+#
+# Device Drivers
+#
+# CONFIG_DISABLE_POLL is not set
+CONFIG_DEV_NULL=y
+# CONFIG_DEV_ZERO is not set
+# CONFIG_LOOP is not set
+# CONFIG_RAMDISK is not set
+# CONFIG_CAN is not set
+# CONFIG_PWM is not set
+CONFIG_I2C=y
+# CONFIG_I2C_SLAVE is not set
+CONFIG_I2C_TRANSFER=y
+# CONFIG_I2C_WRITEREAD is not set
+# CONFIG_I2C_POLLED is not set
+# CONFIG_I2C_TRACE is not set
+CONFIG_ARCH_HAVE_I2CRESET=y
+CONFIG_I2C_RESET=y
+CONFIG_SPI=y
+# CONFIG_SPI_OWNBUS is not set
+CONFIG_SPI_EXCHANGE=y
+# CONFIG_SPI_CMDDATA is not set
+# CONFIG_RTC is not set
+CONFIG_WATCHDOG=y
+# CONFIG_ANALOG is not set
+# CONFIG_AUDIO_DEVICES is not set
+# CONFIG_BCH is not set
+# CONFIG_INPUT is not set
+# CONFIG_LCD is not set
+# CONFIG_MMCSD is not set
+# CONFIG_MTD is not set
+CONFIG_PIPES=y
+# CONFIG_PM is not set
+# CONFIG_POWER is not set
+# CONFIG_SENSORS is not set
+CONFIG_SERIAL=y
+# CONFIG_DEV_LOWCONSOLE is not set
+CONFIG_SERIAL_REMOVABLE=y
+# CONFIG_16550_UART is not set
+CONFIG_ARCH_HAVE_USART2=y
+CONFIG_MCU_SERIAL=y
+CONFIG_STANDARD_SERIAL=y
+CONFIG_SERIAL_NPOLLWAITERS=2
+CONFIG_USART2_SERIAL_CONSOLE=y
+# CONFIG_NO_SERIAL_CONSOLE is not set
+
+#
+# USART2 Configuration
+#
+CONFIG_USART2_RXBUFSIZE=512
+CONFIG_USART2_TXBUFSIZE=512
+CONFIG_USART2_BAUD=57600
+CONFIG_USART2_BITS=8
+CONFIG_USART2_PARITY=0
+CONFIG_USART2_2STOP=0
+# CONFIG_USART2_IFLOWCONTROL is not set
+# CONFIG_USART2_OFLOWCONTROL is not set
+# CONFIG_SERIAL_IFLOWCONTROL is not set
+# CONFIG_SERIAL_OFLOWCONTROL is not set
+CONFIG_USBDEV=y
+
+#
+# USB Device Controller Driver Options
+#
+# CONFIG_USBDEV_ISOCHRONOUS is not set
+# CONFIG_USBDEV_DUALSPEED is not set
+# CONFIG_USBDEV_SELFPOWERED is not set
+CONFIG_USBDEV_BUSPOWERED=y
+CONFIG_USBDEV_MAXPOWER=500
+# CONFIG_USBDEV_DMA is not set
+# CONFIG_USBDEV_TRACE is not set
+
+#
+# USB Device Class Driver Options
+#
+# CONFIG_USBDEV_COMPOSITE is not set
+# CONFIG_PL2303 is not set
+CONFIG_CDCACM=y
+# CONFIG_CDCACM_CONSOLE is not set
+CONFIG_CDCACM_EP0MAXPACKET=64
+CONFIG_CDCACM_EPINTIN=1
+CONFIG_CDCACM_EPINTIN_FSSIZE=64
+CONFIG_CDCACM_EPINTIN_HSSIZE=64
+CONFIG_CDCACM_EPBULKOUT=3
+CONFIG_CDCACM_EPBULKOUT_FSSIZE=64
+CONFIG_CDCACM_EPBULKOUT_HSSIZE=512
+CONFIG_CDCACM_EPBULKIN=2
+CONFIG_CDCACM_EPBULKIN_FSSIZE=64
+CONFIG_CDCACM_EPBULKIN_HSSIZE=512
+CONFIG_CDCACM_NWRREQS=4
+CONFIG_CDCACM_NRDREQS=4
+CONFIG_CDCACM_BULKIN_REQLEN=96
+CONFIG_CDCACM_RXBUFSIZE=512
+CONFIG_CDCACM_TXBUFSIZE=2048
+CONFIG_CDCACM_VENDORID=0x26ac
+CONFIG_CDCACM_PRODUCTID=0x0011
+CONFIG_CDCACM_VENDORSTR="3D Robotics"
+CONFIG_CDCACM_PRODUCTSTR="PX4 FMU v2.x"
+# CONFIG_USBMSC is not set
+# CONFIG_USBHOST is not set
+# CONFIG_WIRELESS is not set
+
+#
+# System Logging Device Options
+#
+
+#
+# System Logging
+#
+# CONFIG_RAMLOG is not set
+
+#
+# Networking Support
+#
+# CONFIG_NET is not set
+
+#
+# File Systems
+#
+
+#
+# File system configuration
+#
+# CONFIG_DISABLE_MOUNTPOINT is not set
+# CONFIG_FS_RAMMAP is not set
+CONFIG_FS_FAT=y
+# CONFIG_FAT_LCNAMES is not set
+# CONFIG_FAT_LFN is not set
+# CONFIG_FS_FATTIME is not set
+# CONFIG_FAT_DMAMEMORY is not set
+CONFIG_FS_NXFFS=y
+CONFIG_NXFFS_PREALLOCATED=y
+CONFIG_NXFFS_ERASEDSTATE=0xff
+CONFIG_NXFFS_PACKTHRESHOLD=32
+CONFIG_NXFFS_MAXNAMLEN=32
+CONFIG_NXFFS_TAILTHRESHOLD=2048
+CONFIG_FS_ROMFS=y
+# CONFIG_FS_SMARTFS is not set
+CONFIG_FS_BINFS=y
+
+#
+# System Logging
+#
+# CONFIG_SYSLOG_ENABLE is not set
+# CONFIG_SYSLOG is not set
+
+#
+# Graphics Support
+#
+# CONFIG_NX is not set
+
+#
+# Memory Management
+#
+# CONFIG_MM_MULTIHEAP is not set
+# CONFIG_MM_SMALL is not set
+CONFIG_MM_REGIONS=2
+CONFIG_GRAN=y
+# CONFIG_GRAN_SINGLE is not set
+# CONFIG_GRAN_INTR is not set
+
+#
+# Audio Support
+#
+# CONFIG_AUDIO is not set
+
+#
+# Binary Formats
+#
+# CONFIG_BINFMT_DISABLE is not set
+# CONFIG_BINFMT_EXEPATH is not set
+# CONFIG_NXFLAT is not set
+# CONFIG_ELF is not set
+CONFIG_BUILTIN=y
+# CONFIG_PIC is not set
+# CONFIG_SYMTAB_ORDEREDBYNAME is not set
+
+#
+# Library Routines
+#
+
+#
+# Standard C Library Options
+#
+CONFIG_STDIO_BUFFER_SIZE=32
+CONFIG_STDIO_LINEBUFFER=y
+CONFIG_NUNGET_CHARS=2
+CONFIG_LIB_HOMEDIR="/"
+# CONFIG_NOPRINTF_FIELDWIDTH is not set
+CONFIG_LIBC_FLOATINGPOINT=y
+CONFIG_LIB_RAND_ORDER=1
+# CONFIG_EOL_IS_CR is not set
+# CONFIG_EOL_IS_LF is not set
+# CONFIG_EOL_IS_BOTH_CRLF is not set
+CONFIG_EOL_IS_EITHER_CRLF=y
+# CONFIG_LIBC_EXECFUNCS is not set
+CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
+CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
+CONFIG_LIBC_STRERROR=y
+# CONFIG_LIBC_STRERROR_SHORT is not set
+# CONFIG_LIBC_PERROR_STDOUT is not set
+CONFIG_ARCH_LOWPUTC=y
+CONFIG_LIB_SENDFILE_BUFSIZE=512
+# CONFIG_ARCH_ROMGETC is not set
+CONFIG_ARCH_OPTIMIZED_FUNCTIONS=y
+CONFIG_ARCH_MEMCPY=y
+# CONFIG_ARCH_MEMCMP is not set
+# CONFIG_ARCH_MEMMOVE is not set
+# CONFIG_ARCH_MEMSET is not set
+# CONFIG_MEMSET_OPTSPEED is not set
+# CONFIG_ARCH_STRCHR is not set
+# CONFIG_ARCH_STRCMP is not set
+# CONFIG_ARCH_STRCPY is not set
+# CONFIG_ARCH_STRNCPY is not set
+# CONFIG_ARCH_STRLEN is not set
+# CONFIG_ARCH_STRNLEN is not set
+# CONFIG_ARCH_BZERO is not set
+
+#
+# Non-standard Library Support
+#
+CONFIG_SCHED_WORKQUEUE=y
+CONFIG_SCHED_HPWORK=y
+CONFIG_SCHED_WORKPRIORITY=192
+CONFIG_SCHED_WORKPERIOD=5000
+CONFIG_SCHED_WORKSTACKSIZE=4000
+CONFIG_SCHED_LPWORK=y
+CONFIG_SCHED_LPWORKPRIORITY=50
+CONFIG_SCHED_LPWORKPERIOD=50000
+CONFIG_SCHED_LPWORKSTACKSIZE=4000
+# CONFIG_LIB_KBDCODEC is not set
+# CONFIG_LIB_SLCDCODEC is not set
+
+#
+# Basic CXX Support
+#
+CONFIG_C99_BOOL8=y
+CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
+# CONFIG_CXX_NEWLONG is not set
+
+#
+# uClibc++ Standard C++ Library
+#
+# CONFIG_UCLIBCXX is not set
+
+#
+# Application Configuration
+#
+
+#
+# Built-In Applications
+#
+CONFIG_BUILTIN_PROXY_STACKSIZE=1024
+
+#
+# Examples
+#
+# CONFIG_EXAMPLES_BUTTONS is not set
+# CONFIG_EXAMPLES_CAN is not set
+CONFIG_EXAMPLES_CDCACM=y
+# CONFIG_EXAMPLES_COMPOSITE is not set
+# CONFIG_EXAMPLES_CXXTEST is not set
+# CONFIG_EXAMPLES_DHCPD is not set
+# CONFIG_EXAMPLES_ELF is not set
+# CONFIG_EXAMPLES_FTPC is not set
+# CONFIG_EXAMPLES_FTPD is not set
+# CONFIG_EXAMPLES_HELLO is not set
+# CONFIG_EXAMPLES_HELLOXX is not set
+# CONFIG_EXAMPLES_JSON is not set
+# CONFIG_EXAMPLES_HIDKBD is not set
+# CONFIG_EXAMPLES_KEYPADTEST is not set
+# CONFIG_EXAMPLES_IGMP is not set
+# CONFIG_EXAMPLES_LCDRW is not set
+# CONFIG_EXAMPLES_MM is not set
+# CONFIG_EXAMPLES_MODBUS is not set
+CONFIG_EXAMPLES_MOUNT=y
+# CONFIG_EXAMPLES_NRF24L01TERM is not set
+CONFIG_EXAMPLES_NSH=y
+# CONFIG_EXAMPLES_NULL is not set
+# CONFIG_EXAMPLES_NX is not set
+# CONFIG_EXAMPLES_NXCONSOLE is not set
+# CONFIG_EXAMPLES_NXFFS is not set
+# CONFIG_EXAMPLES_NXFLAT is not set
+# CONFIG_EXAMPLES_NXHELLO is not set
+# CONFIG_EXAMPLES_NXIMAGE is not set
+# CONFIG_EXAMPLES_NXLINES is not set
+# CONFIG_EXAMPLES_NXTEXT is not set
+# CONFIG_EXAMPLES_OSTEST is not set
+# CONFIG_EXAMPLES_PASHELLO is not set
+# CONFIG_EXAMPLES_PIPE is not set
+# CONFIG_EXAMPLES_POSIXSPAWN is not set
+# CONFIG_EXAMPLES_QENCODER is not set
+# CONFIG_EXAMPLES_RGMP is not set
+# CONFIG_EXAMPLES_ROMFS is not set
+# CONFIG_EXAMPLES_SENDMAIL is not set
+# CONFIG_EXAMPLES_SERLOOP is not set
+# CONFIG_EXAMPLES_SLCD is not set
+# CONFIG_EXAMPLES_SMART_TEST is not set
+# CONFIG_EXAMPLES_SMART is not set
+# CONFIG_EXAMPLES_TCPECHO is not set
+# CONFIG_EXAMPLES_TELNETD is not set
+# CONFIG_EXAMPLES_THTTPD is not set
+# CONFIG_EXAMPLES_TIFF is not set
+# CONFIG_EXAMPLES_TOUCHSCREEN is not set
+# CONFIG_EXAMPLES_UDP is not set
+# CONFIG_EXAMPLES_UIP is not set
+# CONFIG_EXAMPLES_USBSERIAL is not set
+# CONFIG_EXAMPLES_USBMSC is not set
+# CONFIG_EXAMPLES_USBTERM is not set
+# CONFIG_EXAMPLES_WATCHDOG is not set
+
+#
+# Graphics Support
+#
+# CONFIG_TIFF is not set
+
+#
+# Interpreters
+#
+# CONFIG_INTERPRETERS_FICL is not set
+# CONFIG_INTERPRETERS_PCODE is not set
+
+#
+# Network Utilities
+#
+
+#
+# Networking Utilities
+#
+# CONFIG_NETUTILS_CODECS is not set
+# CONFIG_NETUTILS_DHCPC is not set
+# CONFIG_NETUTILS_DHCPD is not set
+# CONFIG_NETUTILS_FTPC is not set
+# CONFIG_NETUTILS_FTPD is not set
+# CONFIG_NETUTILS_JSON is not set
+# CONFIG_NETUTILS_RESOLV is not set
+# CONFIG_NETUTILS_SMTP is not set
+# CONFIG_NETUTILS_TELNETD is not set
+# CONFIG_NETUTILS_TFTPC is not set
+# CONFIG_NETUTILS_THTTPD is not set
+# CONFIG_NETUTILS_UIPLIB is not set
+# CONFIG_NETUTILS_WEBCLIENT is not set
+
+#
+# FreeModBus
+#
+# CONFIG_MODBUS is not set
+
+#
+# NSH Library
+#
+CONFIG_NSH_LIBRARY=y
+CONFIG_NSH_BUILTIN_APPS=y
+
+#
+# Disable Individual commands
+#
+# CONFIG_NSH_DISABLE_CAT is not set
+# CONFIG_NSH_DISABLE_CD is not set
+# CONFIG_NSH_DISABLE_CP is not set
+# CONFIG_NSH_DISABLE_DD is not set
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_EXEC is not set
+# CONFIG_NSH_DISABLE_EXIT is not set
+# CONFIG_NSH_DISABLE_FREE is not set
+# CONFIG_NSH_DISABLE_GET is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_HEXDUMP is not set
+# CONFIG_NSH_DISABLE_IFCONFIG is not set
+# CONFIG_NSH_DISABLE_KILL is not set
+# CONFIG_NSH_DISABLE_LOSETUP is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MB is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
+# CONFIG_NSH_DISABLE_MKFATFS is not set
+# CONFIG_NSH_DISABLE_MKFIFO is not set
+# CONFIG_NSH_DISABLE_MKRD is not set
+# CONFIG_NSH_DISABLE_MH is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MW is not set
+# CONFIG_NSH_DISABLE_NSFMOUNT is not set
+# CONFIG_NSH_DISABLE_PS is not set
+# CONFIG_NSH_DISABLE_PING is not set
+# CONFIG_NSH_DISABLE_PUT is not set
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_RM is not set
+# CONFIG_NSH_DISABLE_RMDIR is not set
+# CONFIG_NSH_DISABLE_SET is not set
+# CONFIG_NSH_DISABLE_SH is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_TEST is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
+# CONFIG_NSH_DISABLE_WGET is not set
+# CONFIG_NSH_DISABLE_XD is not set
+
+#
+# Configure Command Options
+#
+# CONFIG_NSH_CMDOPT_DF_H is not set
+CONFIG_NSH_CODECS_BUFSIZE=128
+CONFIG_NSH_FILEIOSIZE=512
+CONFIG_NSH_STRERROR=y
+CONFIG_NSH_LINELEN=128
+CONFIG_NSH_MAXARGUMENTS=12
+CONFIG_NSH_NESTDEPTH=8
+# CONFIG_NSH_DISABLESCRIPT is not set
+# CONFIG_NSH_DISABLEBG is not set
+CONFIG_NSH_ROMFSETC=y
+# CONFIG_NSH_ROMFSRC is not set
+CONFIG_NSH_ROMFSMOUNTPT="/etc"
+CONFIG_NSH_INITSCRIPT="init.d/rcS"
+CONFIG_NSH_ROMFSDEVNO=0
+CONFIG_NSH_ROMFSSECTSIZE=128
+CONFIG_NSH_ARCHROMFS=y
+CONFIG_NSH_FATDEVNO=0
+CONFIG_NSH_FATSECTSIZE=512
+CONFIG_NSH_FATNSECTORS=1024
+CONFIG_NSH_FATMOUNTPT="/tmp"
+CONFIG_NSH_CONSOLE=y
+# CONFIG_NSH_USBCONSOLE is not set
+
+#
+# USB Trace Support
+#
+# CONFIG_NSH_CONDEV is not set
+CONFIG_NSH_ARCHINIT=y
+
+#
+# NxWidgets/NxWM
+#
+
+#
+# System NSH Add-Ons
+#
+
+#
+# Custom Free Memory Command
+#
+# CONFIG_SYSTEM_FREE is not set
+
+#
+# I2C tool
+#
+# CONFIG_SYSTEM_I2CTOOL is not set
+
+#
+# FLASH Program Installation
+#
+# CONFIG_SYSTEM_INSTALL is not set
+
+#
+# FLASH Erase-all Command
+#
+
+#
+# readline()
+#
+CONFIG_SYSTEM_READLINE=y
+CONFIG_READLINE_ECHO=y
+
+#
+# Power Off
+#
+# CONFIG_SYSTEM_POWEROFF is not set
+
+#
+# RAMTRON
+#
+# CONFIG_SYSTEM_RAMTRON is not set
+
+#
+# SD Card
+#
+# CONFIG_SYSTEM_SDCARD is not set
+
+#
+# Sysinfo
+#
+CONFIG_SYSTEM_SYSINFO=y
+
+#
+# USB Monitor
+#
diff --git a/nuttx-configs/px4-stm32f4discovery/nsh/setenv.sh b/nuttx-configs/px4-stm32f4discovery/nsh/setenv.sh
new file mode 100755
index 000000000..265520997
--- /dev/null
+++ b/nuttx-configs/px4-stm32f4discovery/nsh/setenv.sh
@@ -0,0 +1,67 @@
+#!/bin/bash
+# configs/stm3240g-eval/nsh/setenv.sh
+#
+#   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+
+if [ "$_" = "$0" ] ; then
+  echo "You must source this script, not run it!" 1>&2
+  exit 1
+fi
+
+WD=`pwd`
+if [ ! -x "setenv.sh" ]; then
+  echo "This script must be executed from the top-level NuttX build directory"
+  exit 1
+fi
+
+if [ -z "${PATH_ORIG}" ]; then
+  export PATH_ORIG="${PATH}"
+fi
+
+# This the Cygwin path to the location where I installed the RIDE
+# toolchain under windows.  You will also have to edit this if you install
+# the RIDE toolchain in any other location
+#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Raisonance/Ride/arm-gcc/bin"
+
+# This the Cygwin path to the location where I installed the CodeSourcery
+# toolchain under windows.  You will also have to edit this if you install
+# the CodeSourcery toolchain in any other location
+export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
+
+# This the Cygwin path to the location where I build the buildroot
+# toolchain.
+#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
+
+# Add the path to the toolchain to the PATH varialble
+export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
+
+echo "PATH : ${PATH}"
diff --git a/nuttx-configs/px4-stm32f4discovery/scripts/ld.script b/nuttx-configs/px4-stm32f4discovery/scripts/ld.script
new file mode 100644
index 000000000..f39a95c45
--- /dev/null
+++ b/nuttx-configs/px4-stm32f4discovery/scripts/ld.script
@@ -0,0 +1,149 @@
+/****************************************************************************
+ * configs/px4fmu-v1/scripts/ld.script
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/* The STM32F40VGG has 1024Kb of FLASH beginning at address 0x0800:0000 and
+ * 192Kb of SRAM. SRAM is split up into three blocks:
+ *
+ * 1) 112Kb of SRAM beginning at address 0x2000:0000
+ * 2)  16Kb of SRAM beginning at address 0x2001:c000
+ * 3)  64Kb of CCM SRAM beginning at address 0x1000:0000
+ *
+ * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
+ * where the code expects to begin execution by jumping to the entry point in
+ * the 0x0800:0000 address range.
+ *
+ * The first 0x4000 of flash is reserved for the bootloader.
+ */
+
+MEMORY
+{
+    flash (rx)   : ORIGIN = 0x08004000, LENGTH = 1008K
+    sram (rwx)   : ORIGIN = 0x20000000, LENGTH = 128K
+    ccsram (rwx) : ORIGIN = 0x10000000, LENGTH = 64K
+}
+
+OUTPUT_ARCH(arm)
+
+ENTRY(__start)		/* treat __start as the anchor for dead code stripping */
+EXTERN(_vectors)	/* force the vectors to be included in the output */
+
+/* 
+ * Ensure that abort() is present in the final object.  The exception handling
+ * code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
+ */
+EXTERN(abort)
+
+SECTIONS
+{
+	.text : {
+		_stext = ABSOLUTE(.);
+		*(.vectors)
+		*(.text .text.*)        
+		*(.fixup)
+		*(.gnu.warning)
+		*(.rodata .rodata.*)        
+		*(.gnu.linkonce.t.*)
+		*(.got)
+		*(.gcc_except_table)
+		*(.gnu.linkonce.r.*)
+		_etext = ABSOLUTE(.);
+
+		/* 
+		 * This is a hack to make the newlib libm __errno() call
+		 * use the NuttX get_errno_ptr() function.
+		 */
+		__errno = get_errno_ptr;
+	} > flash
+
+	/*
+	 * Init functions (static constructors and the like)
+	 */
+        .init_section : {
+                _sinit = ABSOLUTE(.);
+                KEEP(*(.init_array .init_array.*))
+                _einit = ABSOLUTE(.);
+        } > flash
+
+	/*
+	 * Construction data for parameters.
+	 */
+	__param ALIGN(4): {
+		__param_start = ABSOLUTE(.);
+		KEEP(*(__param*))
+		__param_end = ABSOLUTE(.);
+	} > flash
+
+	.ARM.extab : {
+		*(.ARM.extab*)
+	} > flash
+
+	__exidx_start = ABSOLUTE(.);
+	.ARM.exidx : {
+		*(.ARM.exidx*)
+	} > flash
+	__exidx_end = ABSOLUTE(.);
+
+	_eronly = ABSOLUTE(.);
+
+	.data : {
+		_sdata = ABSOLUTE(.);
+		*(.data .data.*)
+		*(.gnu.linkonce.d.*)
+		CONSTRUCTORS
+		_edata = ABSOLUTE(.);
+	} > sram AT > flash
+
+	.bss : {
+		_sbss = ABSOLUTE(.);
+		*(.bss .bss.*)
+		*(.gnu.linkonce.b.*)
+		*(COMMON)
+		_ebss = ABSOLUTE(.);
+	} > sram
+
+	/* Stabs debugging sections. */
+	.stab 0 : { *(.stab) }
+	.stabstr 0 : { *(.stabstr) }
+	.stab.excl 0 : { *(.stab.excl) }
+	.stab.exclstr 0 : { *(.stab.exclstr) }
+	.stab.index 0 : { *(.stab.index) }
+	.stab.indexstr 0 : { *(.stab.indexstr) }
+	.comment 0 : { *(.comment) }
+	.debug_abbrev 0 : { *(.debug_abbrev) }
+	.debug_info 0 : { *(.debug_info) }
+	.debug_line 0 : { *(.debug_line) }
+	.debug_pubnames 0 : { *(.debug_pubnames) }
+	.debug_aranges 0 : { *(.debug_aranges) }
+}
diff --git a/nuttx-configs/px4-stm32f4discovery/src/Makefile b/nuttx-configs/px4-stm32f4discovery/src/Makefile
new file mode 100644
index 000000000..d4276f7fc
--- /dev/null
+++ b/nuttx-configs/px4-stm32f4discovery/src/Makefile
@@ -0,0 +1,84 @@
+############################################################################
+# configs/px4fmu/src/Makefile
+#
+#   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+-include $(TOPDIR)/Make.defs
+
+CFLAGS		+= -I$(TOPDIR)/sched
+
+ASRCS		= 
+AOBJS		= $(ASRCS:.S=$(OBJEXT))
+
+CSRCS		= empty.c
+COBJS		= $(CSRCS:.c=$(OBJEXT))
+
+SRCS		= $(ASRCS) $(CSRCS)
+OBJS		= $(AOBJS) $(COBJS)
+
+ARCH_SRCDIR	= $(TOPDIR)/arch/$(CONFIG_ARCH)/src
+ifeq ($(WINTOOL),y)
+  CFLAGS	+= -I "${shell cygpath -w $(ARCH_SRCDIR)/chip}" \
+  		   -I "${shell cygpath -w $(ARCH_SRCDIR)/common}" \
+  		   -I "${shell cygpath -w $(ARCH_SRCDIR)/armv7-m}"
+else
+  CFLAGS	+= -I$(ARCH_SRCDIR)/chip -I$(ARCH_SRCDIR)/common -I$(ARCH_SRCDIR)/armv7-m
+endif
+
+all: libboard$(LIBEXT)
+
+$(AOBJS): %$(OBJEXT): %.S
+	$(call ASSEMBLE, $<, $@)
+
+$(COBJS) $(LINKOBJS): %$(OBJEXT): %.c
+	$(call COMPILE, $<, $@)
+
+libboard$(LIBEXT): $(OBJS)
+	$(call ARCHIVE, $@, $(OBJS))
+
+.depend: Makefile $(SRCS)
+	$(Q) $(MKDEP) $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep
+	$(Q) touch $@
+
+depend: .depend
+
+clean:
+	$(call DELFILE, libboard$(LIBEXT))
+	$(call CLEAN)
+
+distclean: clean
+	$(call DELFILE, Make.dep)
+	$(call DELFILE, .depend)
+
+-include Make.dep
+
diff --git a/nuttx-configs/px4-stm32f4discovery/src/empty.c b/nuttx-configs/px4-stm32f4discovery/src/empty.c
new file mode 100644
index 000000000..ace900866
--- /dev/null
+++ b/nuttx-configs/px4-stm32f4discovery/src/empty.c
@@ -0,0 +1,4 @@
+/*
+ * There are no source files here, but libboard.a can't be empty, so 
+ * we have this empty source file to keep it company.
+ */
diff --git a/src/drivers/boards/px4-stm32f4discovery/board_config.h b/src/drivers/boards/px4-stm32f4discovery/board_config.h
new file mode 100644
index 000000000..dd66abc19
--- /dev/null
+++ b/src/drivers/boards/px4-stm32f4discovery/board_config.h
@@ -0,0 +1,136 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2013, 2014 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file board_config.h
+ *
+ * PX4-STM32F4Discovery internal definitions
+ */
+
+#pragma once
+
+/****************************************************************************************************
+ * Included Files
+ ****************************************************************************************************/
+
+#include <nuttx/config.h>
+#include <nuttx/compiler.h>
+#include <stdint.h>
+
+__BEGIN_DECLS
+
+/* these headers are not C++ safe */
+#include <stm32.h>
+#include <arch/board/board.h>
+
+#define UDID_START		0x1FFF7A10
+ 
+/****************************************************************************************************
+ * Definitions
+ ****************************************************************************************************/
+/* Configuration ************************************************************************************/
+
+/* PX4FMU GPIOs ***********************************************************************************/
+/* LEDs */
+/* LEDs */
+
+#define GPIO_LED1       (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
+                         GPIO_OUTPUT_CLEAR|GPIO_PORTD|GPIO_PIN12)
+#define GPIO_LED2       (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
+                         GPIO_OUTPUT_CLEAR|GPIO_PORTD|GPIO_PIN13)
+#define GPIO_LED3       (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
+                         GPIO_OUTPUT_CLEAR|GPIO_PORTD|GPIO_PIN14)
+#define GPIO_LED4       (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
+                         GPIO_OUTPUT_CLEAR|GPIO_PORTD|GPIO_PIN15)
+
+/* SPI chip selects */
+#define GPIO_SPI_CS_MEMS    (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN3)
+
+/* USB OTG FS
+ *
+ * PA9  OTG_FS_VBUS VBUS sensing
+ */
+#define GPIO_OTGFS_VBUS		(GPIO_INPUT|GPIO_FLOAT|GPIO_SPEED_100MHz|GPIO_OPENDRAIN|GPIO_PORTA|GPIO_PIN9)
+
+/* High-resolution timer */
+#define HRT_TIMER		8	/* use timer8 for the HRT */
+#define HRT_TIMER_CHANNEL	1	/* use capture/compare channel */
+
+/****************************************************************************************************
+ * Public Types
+ ****************************************************************************************************/
+
+/****************************************************************************************************
+ * Public data
+ ****************************************************************************************************/
+
+#ifndef __ASSEMBLY__
+
+/****************************************************************************************************
+ * Public Functions
+ ****************************************************************************************************/
+
+/****************************************************************************************************
+ * Name: stm32_spiinitialize
+ *
+ * Description:
+ *   Called to configure SPI chip select GPIO pins for the PX4FMU board.
+ *
+ ****************************************************************************************************/
+
+extern void stm32_spiinitialize(void);
+
+extern void stm32_usbinitialize(void);
+
+/****************************************************************************
+ * Name: nsh_archinitialize
+ *
+ * Description:
+ *   Perform architecture specific initialization for NSH.
+ *
+ *   CONFIG_NSH_ARCHINIT=y :
+ *     Called from the NSH library
+ *
+ *   CONFIG_BOARD_INITIALIZE=y, CONFIG_NSH_LIBRARY=y, &&
+ *   CONFIG_NSH_ARCHINIT=n :
+ *     Called from board_initialize().
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_NSH_LIBRARY
+int nsh_archinitialize(void);
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+__END_DECLS
diff --git a/src/drivers/boards/px4-stm32f4discovery/module.mk b/src/drivers/boards/px4-stm32f4discovery/module.mk
new file mode 100644
index 000000000..6b75c08e9
--- /dev/null
+++ b/src/drivers/boards/px4-stm32f4discovery/module.mk
@@ -0,0 +1,7 @@
+#
+# Board-specific startup code for the PX4-STM32F4Discovery
+#
+
+SRCS		 = px4discovery_init.c \
+		   px4discovery_usb.c \
+		   px4discovery_led.c
diff --git a/src/drivers/boards/px4-stm32f4discovery/px4discovery_init.c b/src/drivers/boards/px4-stm32f4discovery/px4discovery_init.c
new file mode 100644
index 000000000..fb1b28236
--- /dev/null
+++ b/src/drivers/boards/px4-stm32f4discovery/px4discovery_init.c
@@ -0,0 +1,173 @@
+/****************************************************************************
+ *
+ *   Copyright (C) 2012 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file px4discovery_init.c
+ *
+ * PX4-stm32f4discovery specific early startup code.  This file implements the
+ * nsh_archinitialize() function that is called early by nsh during startup.
+ *
+ * Code here is run before the rcS script is invoked; it should start required
+ * subsystems and perform board-specific initialisation.
+ */
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <stdbool.h>
+#include <stdio.h>
+#include <debug.h>
+#include <errno.h>
+
+#include <nuttx/arch.h>
+#include <nuttx/spi.h>
+#include <nuttx/i2c.h>
+#include <nuttx/sdio.h>
+#include <nuttx/mmcsd.h>
+#include <nuttx/analog/adc.h>
+#include <nuttx/gran.h>
+
+#include <stm32.h>
+#include "board_config.h"
+#include <stm32_uart.h>
+
+#include <arch/board/board.h>
+
+#include <drivers/drv_hrt.h>
+#include <drivers/drv_led.h>
+
+#include <systemlib/cpuload.h>
+#include <systemlib/perf_counter.h>
+
+/****************************************************************************
+ * Pre-Processor Definitions
+ ****************************************************************************/
+
+/* Configuration ************************************************************/
+
+/* Debug ********************************************************************/
+
+#ifdef CONFIG_CPP_HAVE_VARARGS
+#  ifdef CONFIG_DEBUG
+#    define message(...) lowsyslog(__VA_ARGS__)
+#  else
+#    define message(...) printf(__VA_ARGS__)
+#  endif
+#else
+#  ifdef CONFIG_DEBUG
+#    define message lowsyslog
+#  else
+#    define message printf
+#  endif
+#endif
+
+/****************************************************************************
+ * Protected Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/************************************************************************************
+ * Name: stm32_boardinitialize
+ *
+ * Description:
+ *   All STM32 architectures must provide the following entry point.  This entry point
+ *   is called early in the intitialization -- after all memory has been configured
+ *   and mapped but before any devices have been initialized.
+ *
+ ************************************************************************************/
+
+__EXPORT void
+stm32_boardinitialize(void)
+{
+	/* configure LEDs */
+	up_ledinit();
+}
+
+/****************************************************************************
+ * Name: nsh_archinitialize
+ *
+ * Description:
+ *   Perform architecture specific initialization
+ *
+ ****************************************************************************/
+
+#include <math.h>
+
+#ifdef __cplusplus
+__EXPORT int matherr(struct __exception *e)
+{
+	return 1;
+}
+#else
+__EXPORT int matherr(struct exception *e)
+{
+	return 1;
+}
+#endif
+
+__EXPORT int nsh_archinitialize(void)
+{
+
+	/* configure the high-resolution time/callout interface */
+	hrt_init();
+
+	/* configure CPU load estimation */
+#ifdef CONFIG_SCHED_INSTRUMENTATION
+	cpuload_initialize_once();
+#endif
+
+	/* set up the serial DMA polling */
+	static struct hrt_call serial_dma_call;
+	struct timespec ts;
+
+	/*
+	 * Poll at 1ms intervals for received bytes that have not triggered
+	 * a DMA event.
+	 */
+	ts.tv_sec = 0;
+	ts.tv_nsec = 1000000;
+
+	hrt_call_every(&serial_dma_call,
+		       ts_to_abstime(&ts),
+		       ts_to_abstime(&ts),
+		       (hrt_callout)stm32_serial_dma_poll,
+		       NULL);
+
+	return OK;
+}
diff --git a/src/drivers/boards/px4-stm32f4discovery/px4discovery_led.c b/src/drivers/boards/px4-stm32f4discovery/px4discovery_led.c
new file mode 100644
index 000000000..1f42843ed
--- /dev/null
+++ b/src/drivers/boards/px4-stm32f4discovery/px4discovery_led.c
@@ -0,0 +1,97 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2013 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file px4discovery_led.c
+ *
+ * PX4-stm32f4discovery LED backend.
+ */
+
+#include <nuttx/config.h>
+
+#include <stdbool.h>
+
+#include "stm32.h"
+#include "board_config.h"
+
+#include <arch/board/board.h>
+
+/*
+ * Ideally we'd be able to get these from up_internal.h,
+ * but since we want to be able to disable the NuttX use
+ * of leds for system indication at will and there is no
+ * separate switch, we need to build independent of the
+ * CONFIG_ARCH_LEDS configuration switch.
+ */
+__BEGIN_DECLS
+extern void led_init(void);
+extern void led_on(int led);
+extern void led_off(int led);
+extern void led_toggle(int led);
+__END_DECLS
+
+__EXPORT void led_init()
+{
+	/* Configure LED1 GPIO for output */
+
+	stm32_configgpio(GPIO_LED1);
+}
+
+__EXPORT void led_on(int led)
+{
+	if (led == 1)
+	{
+		/* Pull down to switch on */
+		stm32_gpiowrite(GPIO_LED1, false);
+	}
+}
+
+__EXPORT void led_off(int led)
+{
+	if (led == 1)
+	{
+		/* Pull up to switch off */
+		stm32_gpiowrite(GPIO_LED1, true);
+	}
+}
+
+__EXPORT void led_toggle(int led)
+{
+	if (led == 1)
+	{
+		if (stm32_gpioread(GPIO_LED1))
+			stm32_gpiowrite(GPIO_LED1, false);
+		else
+			stm32_gpiowrite(GPIO_LED1, true);
+	}
+}
diff --git a/src/drivers/boards/px4-stm32f4discovery/px4discovery_usb.c b/src/drivers/boards/px4-stm32f4discovery/px4discovery_usb.c
new file mode 100644
index 000000000..887ca67ef
--- /dev/null
+++ b/src/drivers/boards/px4-stm32f4discovery/px4discovery_usb.c
@@ -0,0 +1,108 @@
+/****************************************************************************
+ *
+ *   Copyright (C) 2012 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file px4discovery_usb.c
+ *
+ * Board-specific USB functions.
+ */
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <sys/types.h>
+#include <stdint.h>
+#include <stdbool.h>
+#include <debug.h>
+
+#include <nuttx/usb/usbdev.h>
+#include <nuttx/usb/usbdev_trace.h>
+
+#include <up_arch.h>
+#include <stm32.h>
+#include "board_config.h"
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Private Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Name: stm32_usbinitialize
+ *
+ * Description:
+ *   Called to setup USB-related GPIO pins for the PX4-STM32F4Discovery board.
+ *
+ ************************************************************************************/
+
+__EXPORT void stm32_usbinitialize(void)
+{
+	/* The OTG FS has an internal soft pull-up */
+
+	/* Configure the OTG FS VBUS sensing GPIO, Power On, and Overcurrent GPIOs */
+
+#ifdef CONFIG_STM32_OTGFS
+	stm32_configgpio(GPIO_OTGFS_VBUS);
+	/* XXX We only support device mode
+	stm32_configgpio(GPIO_OTGFS_PWRON);
+	stm32_configgpio(GPIO_OTGFS_OVER);
+	*/
+#endif
+}
+
+/************************************************************************************
+ * Name:  stm32_usbsuspend
+ *
+ * Description:
+ *   Board logic must provide the stm32_usbsuspend logic if the USBDEV driver is
+ *   used.  This function is called whenever the USB enters or leaves suspend mode.
+ *   This is an opportunity for the board logic to shutdown clocks, power, etc.
+ *   while the USB is suspended.
+ *
+ ************************************************************************************/
+
+__EXPORT void stm32_usbsuspend(FAR struct usbdev_s *dev, bool resume)
+{
+	ulldbg("resume: %d\n", resume);
+}
+
diff --git a/src/drivers/drv_gpio.h b/src/drivers/drv_gpio.h
index be9604b6e..f18c8162d 100644
--- a/src/drivers/drv_gpio.h
+++ b/src/drivers/drv_gpio.h
@@ -110,9 +110,13 @@
 /* no GPIO driver on the PX4IOv2 board */
 #endif
 
+#ifdef CONFIG_ARCH_BOARD_PX4_STM32F4DISCOVERY
+/* no GPIO driver on the PX4_STM32F4DISCOVERY board */
+#endif
+
 #if !defined(CONFIG_ARCH_BOARD_PX4IO_V1) && !defined(CONFIG_ARCH_BOARD_PX4IO_V2)  && \
 	!defined(CONFIG_ARCH_BOARD_PX4FMU_V1) && !defined(CONFIG_ARCH_BOARD_PX4FMU_V2) && \
-	!defined(CONFIG_ARCH_BOARD_AEROCORE)
+	!defined(CONFIG_ARCH_BOARD_AEROCORE) && !defined(CONFIG_ARCH_BOARD_PX4_STM32F4DISCOVERY)
 # error No CONFIG_ARCH_BOARD_xxxx set
 #endif
 /*
diff --git a/src/lib/version/version.h b/src/lib/version/version.h
index d8ccb6774..873240630 100644
--- a/src/lib/version/version.h
+++ b/src/lib/version/version.h
@@ -63,4 +63,8 @@
 #define	HW_ARCH "AEROCORE"
 #endif
 
+#ifdef CONFIG_ARCH_BOARD_PX4_STM32F4DISCOVERY
+#define HW_ARCH "PX4_STM32F4DISCOVERY"
+#endif
+
 #endif /* VERSION_H_ */
diff --git a/src/systemcmds/tests/test_gpio.c b/src/systemcmds/tests/test_gpio.c
index 62a873270..82c122550 100644
--- a/src/systemcmds/tests/test_gpio.c
+++ b/src/systemcmds/tests/test_gpio.c
@@ -89,10 +89,11 @@
 
 int test_gpio(int argc, char *argv[])
 {
-	int		fd;
 	int		ret = 0;
 
-	fd = open(PX4IO_DEVICE_PATH, 0);
+#ifdef PX4IO_DEVICE_PATH
+
+	int fd = open(PX4IO_DEVICE_PATH, 0);
 
 	if (fd < 0) {
 		printf("GPIO: open fail\n");
@@ -109,7 +110,11 @@ int test_gpio(int argc, char *argv[])
 	/* Go back to default */
 	ioctl(fd, GPIO_RESET, ~0);
 
+	close(fd);
 	printf("\t GPIO test successful.\n");
 
+#endif
+
+
 	return ret;
 }