diff options
Diffstat (limited to 'src/modules/px4iofirmware/protocol.h')
| -rw-r--r-- | src/modules/px4iofirmware/protocol.h | 40 |
1 files changed, 25 insertions, 15 deletions
diff --git a/src/modules/px4iofirmware/protocol.h b/src/modules/px4iofirmware/protocol.h index d48c6c529..d5a6b1ec4 100644 --- a/src/modules/px4iofirmware/protocol.h +++ b/src/modules/px4iofirmware/protocol.h @@ -142,6 +142,7 @@ #define PX4IO_P_RAW_RC_FLAGS_FAILSAFE (1 << 1) /* receiver is in failsafe mode */ #define PX4IO_P_RAW_RC_FLAGS_RC_DSM11 (1 << 2) /* DSM decoding is 11 bit mode */ #define PX4IO_P_RAW_RC_FLAGS_MAPPING_OK (1 << 3) /* Channel mapping is ok */ +#define PX4IO_P_RAW_RC_FLAGS_RC_OK (1 << 4) /* RC reception ok */ #define PX4IO_P_RAW_RC_NRSSI 2 /* [2] Normalized RSSI value, 0: no reception, 255: perfect reception */ #define PX4IO_P_RAW_RC_DATA 3 /* [1] + [2] Details about the RC source (PPM frame length, Spektrum protocol type) */ @@ -164,10 +165,10 @@ /* setup page */ #define PX4IO_PAGE_SETUP 50 #define PX4IO_P_SETUP_FEATURES 0 -#define PX4IO_P_SETUP_FEATURES_SBUS1_OUT (1 << 0) /* enable S.Bus v1 output */ -#define PX4IO_P_SETUP_FEATURES_SBUS2_OUT (1 << 1) /* enable S.Bus v2 output */ -#define PX4IO_P_SETUP_FEATURES_PWM_RSSI (1 << 2) /* enable PWM RSSI parsing */ -#define PX4IO_P_SETUP_FEATURES_ADC_RSSI (1 << 3) /* enable ADC RSSI parsing */ +#define PX4IO_P_SETUP_FEATURES_SBUS1_OUT (1 << 0) /**< enable S.Bus v1 output */ +#define PX4IO_P_SETUP_FEATURES_SBUS2_OUT (1 << 1) /**< enable S.Bus v2 output */ +#define PX4IO_P_SETUP_FEATURES_PWM_RSSI (1 << 2) /**< enable PWM RSSI parsing */ +#define PX4IO_P_SETUP_FEATURES_ADC_RSSI (1 << 3) /**< enable ADC RSSI parsing */ #define PX4IO_P_SETUP_ARMING 1 /* arming controls */ #define PX4IO_P_SETUP_ARMING_IO_ARM_OK (1 << 0) /* OK to arm the IO side */ @@ -189,6 +190,8 @@ #define PX4IO_P_SETUP_RELAYS_POWER2 (1<<1) /* hardware rev [1] power relay 2 */ #define PX4IO_P_SETUP_RELAYS_ACC1 (1<<2) /* hardware rev [1] accessory power 1 */ #define PX4IO_P_SETUP_RELAYS_ACC2 (1<<3) /* hardware rev [1] accessory power 2 */ +#else +#define PX4IO_P_SETUP_RELAYS_PAD 5 #endif #define PX4IO_P_SETUP_VBATT_SCALE 6 /* hardware rev [1] battery voltage correction factor (float) */ @@ -201,26 +204,33 @@ enum { /* DSM bind states */ dsm_bind_send_pulses, dsm_bind_reinit_uart }; - /* 8 */ -#define PX4IO_P_SETUP_SET_DEBUG 9 /* debug level for IO board */ + /* 8 */ +#define PX4IO_P_SETUP_SET_DEBUG 9 /* debug level for IO board */ -#define PX4IO_P_SETUP_REBOOT_BL 10 /* reboot IO into bootloader */ -#define PX4IO_REBOOT_BL_MAGIC 14662 /* required argument for reboot (random) */ +#define PX4IO_P_SETUP_REBOOT_BL 10 /* reboot IO into bootloader */ +#define PX4IO_REBOOT_BL_MAGIC 14662 /* required argument for reboot (random) */ -#define PX4IO_P_SETUP_CRC 11 /* get CRC of IO firmware */ +#define PX4IO_P_SETUP_CRC 11 /* get CRC of IO firmware */ + /* storage space of 12 occupied by CRC */ +#define PX4IO_P_SETUP_FORCE_SAFETY_OFF 12 /* force safety switch into + 'armed' (PWM enabled) state - this is a non-data write and + hence index 12 can safely be used. */ +#define PX4IO_P_SETUP_RC_THR_FAILSAFE_US 13 /**< the throttle failsafe pulse length in microseconds */ + +#define PX4IO_FORCE_SAFETY_MAGIC 22027 /* required argument for force safety (random) */ /* autopilot control values, -10000..10000 */ -#define PX4IO_PAGE_CONTROLS 51 /**< actuator control groups, one after the other, 8 wide */ +#define PX4IO_PAGE_CONTROLS 51 /**< actuator control groups, one after the other, 8 wide */ #define PX4IO_P_CONTROLS_GROUP_0 (PX4IO_PROTOCOL_MAX_CONTROL_COUNT * 0) /**< 0..PX4IO_PROTOCOL_MAX_CONTROL_COUNT - 1 */ #define PX4IO_P_CONTROLS_GROUP_1 (PX4IO_PROTOCOL_MAX_CONTROL_COUNT * 1) /**< 0..PX4IO_PROTOCOL_MAX_CONTROL_COUNT - 1 */ #define PX4IO_P_CONTROLS_GROUP_2 (PX4IO_PROTOCOL_MAX_CONTROL_COUNT * 2) /**< 0..PX4IO_PROTOCOL_MAX_CONTROL_COUNT - 1 */ #define PX4IO_P_CONTROLS_GROUP_3 (PX4IO_PROTOCOL_MAX_CONTROL_COUNT * 3) /**< 0..PX4IO_PROTOCOL_MAX_CONTROL_COUNT - 1 */ #define PX4IO_P_CONTROLS_GROUP_VALID 64 -#define PX4IO_P_CONTROLS_GROUP_VALID_GROUP0 (1 << 0) /* group 0 is valid / received */ -#define PX4IO_P_CONTROLS_GROUP_VALID_GROUP1 (1 << 1) /* group 1 is valid / received */ -#define PX4IO_P_CONTROLS_GROUP_VALID_GROUP2 (1 << 2) /* group 2 is valid / received */ -#define PX4IO_P_CONTROLS_GROUP_VALID_GROUP3 (1 << 3) /* group 3 is valid / received */ +#define PX4IO_P_CONTROLS_GROUP_VALID_GROUP0 (1 << 0) /**< group 0 is valid / received */ +#define PX4IO_P_CONTROLS_GROUP_VALID_GROUP1 (1 << 1) /**< group 1 is valid / received */ +#define PX4IO_P_CONTROLS_GROUP_VALID_GROUP2 (1 << 2) /**< group 2 is valid / received */ +#define PX4IO_P_CONTROLS_GROUP_VALID_GROUP3 (1 << 3) /**< group 3 is valid / received */ /* raw text load to the mixer parser - ignores offset */ #define PX4IO_PAGE_MIXERLOAD 52 @@ -302,7 +312,7 @@ struct IOPacket { #define PKT_COUNT(_p) ((_p).count_code & PKT_COUNT_MASK) #define PKT_CODE(_p) ((_p).count_code & PKT_CODE_MASK) -#define PKT_SIZE(_p) ((uint8_t *)&((_p).regs[PKT_COUNT(_p)]) - ((uint8_t *)&(_p))) +#define PKT_SIZE(_p) ((size_t)((uint8_t *)&((_p).regs[PKT_COUNT(_p)]) - ((uint8_t *)&(_p)))) static const uint8_t crc8_tab[256] __attribute__((unused)) = { |