#
# This file configures the New Relic Agent. New Relic monitors
# Java applications with deep visibility and low overhead. For more
# information, visit www.newrelic.com.
#
# This configuration file is custom generated for Ivan Topolnak - ivantopo@gmail.com
#
# This section is for settings common to all environments.
# Do not add anything above this next line.
common: &default_settings
#
# ============================== LICENSE KEY ===============================
# You must specify the license key associated with your New Relic
# account. This key binds your Agent's data to your account in the
# New Relic service.
license_key: '2e24765acb032cb9e7207013b5ba3e2ab7d2d75c'
# Agent Enabled
# Use this setting to force the agent to run or not run.
# Default is true.
# agent_enabled: true
# Set to true to enable support for auto app naming.
# The name of each web app is detected automatically
# and the agent reports data separately for each one.
# This provides a finer-grained performance breakdown for
# web apps in New Relic.
# Default is false.
enable_auto_app_naming: false
# Set to true to enable component-based transaction naming.
# Set to false to use the URI of a web request as the name of the transaction.
# Default is true.
enable_auto_transaction_naming: true
# Set the name of your application as you'd like it show up in New Relic.
# if enable_auto_app_naming is false, the agent reports all data to this application.
# Otherwise, the agent reports only background tasks (transactions for non-web applications) to this application.
# To report data to more than one application, separate the application names with ";".
# For example, to report data to"My Application" and "My Application 2" use this:
# app_name: My Application;My Application 2
# This setting is required.
app_name: My Application
# The agent uses its own log file to keep its logging
# separate from that of your application. Specify the log level here.
# This setting is dynamic, so changes do not require restarting your application.
# The levels in increasing order of verboseness are: off, severe, warning, info, fine, finer, finest
# Default is info.
log_level: finest
enable_custom_tracing: true
# Log all data to and from New Relic in plain text.
# This setting is dynamic, so changes do not require restarting your application.
# Default is false.
#audit_mode: true
# The number of log files to use.
# Default is 1.
#log_file_count: 1
# The maximum number of bytes to write to any one log file.
# Default is 0 (no limit).
#log_limit_in_kbytes: 0
# The name of the log file.
# Default is newrelic_agent.log.
#log_file_name: newrelic_agent.log
# The log file directory.
# Default is the logs directory in the newrelic.jar parent directory.
log_file_path: /home/ivantopo/Desktop/tmp
# The agent communicates with New Relic via https by
# default. If you want to communicate with newrelic via http,
# then turn off SSL by setting this value to false.
# This work is done asynchronously to the threads that process your
# application code, so response times will not be directly affected
# by this change.
# Default is true.
ssl: true
# Proxy settings for connecting to the New Relic server.
#
# If a proxy is used, the host setting is required. Other settings
# are optional. Default port is 8080. The username and password
# settings will be used to authenticate to Basic Auth challenges
# from a proxy server.
#
# proxy_host: hostname
# proxy_port: 8080
# proxy_user: username
# proxy_password: password
# Tells transaction tracer and error collector (when enabled)
# whether or not to capture HTTP params. When true, frameworks can
# exclude HTTP parameters from being captured.
# Default is false.
capture_params: false
# Tells transaction tracer and error collector to not to collect
# specific http request parameters.
# ignored_params: credit_card, ssn, password
# Transaction tracer captures deep information about slow
# transactions and sends this to the New Relic service once a
# minute. Included in the transaction is the exact call sequence of
# the transactions including any SQL statements issued.
transaction_tracer:
# Transaction tracer is enabled by default. Set this to false to
# turn it off. This feature is only available at the higher product levels.
# Default is true.
enabled: true
# Threshold in seconds for when to collect a transaction
# trace. When the response time of a controller action exceeds
# this threshold, a transaction trace will be recorded and sent to
# New Relic. Valid values are any float value, or (default) "apdex_f",
# which will use the threshold for the "Frustrated" Apdex level
# (greater than four times the apdex_t value).
# Default is apdex_f.
transaction_threshold: apdex_f
# When transaction tracer is on, SQL statements can optionally be
# recorded. The recorder has three modes, "off" which sends no
# SQL, "raw" which sends the SQL statement in its original form,
# and "obfuscated", which strips out numeric and string literals.
# Default is obfuscated.
record_sql: obfuscated
# Obfuscate only occurrences of specific SQL fields names.
# This setting only applies if "record_sql" is set to "raw".
#obfuscated_sql_fields: credit_card, ssn, password
# Set this to true to log SQL statements instead of recording them.
# SQL is logged using the record_sql mode.
# Default is false.
log_sql: false
# Threshold in seconds for when to collect stack trace for a SQL
# call. In other words, when SQL statements exceed this threshold,
# then capture and send to New Relic the current stack trace. This is
# helpful for pinpointing where long SQL calls originate from.
# Default is 0.5 seconds.
stack_trace_threshold: 0.5
# Determines whether the agent will capture query plans for slow
# SQL queries. Only supported for MySQL and PostgreSQL.
# Default is true.
explain_enabled: true
# Threshold for query execution time below which query plans will not
# not be captured. Relevant only when `explain_enabled` is true.
# Default is 0.5 seconds.
explain_threshold: 0.5
# Use this setting to control the variety of transaction traces.
# The higher the setting, the greater the variety.
# Set this to 0 to always report the slowest transaction trace.
# Default is 20.
top_n: 20
# Error collector captures information about uncaught exceptions and
# sends them to New Relic for viewing
error_collector:
# Error collector is enabled by default. Set this to false to turn
# it off. This feature is only available at the higher product levels.
# Default is true.
enabled: true
# To stop specific exceptions from reporting to New Relic, set this property
# to a comma separated list of full class names.
#
# ignore_errors:
# To stop specific http status codes from being reporting to New Relic as errors,
# set this property to a comma separated list of status codes to ignore.
# When this property is commented out it defaults to ignoring 404s.
#
# ignore_status_codes: 404
# Cross Application Tracing adds request and response headers to
# external calls using the Apache HttpClient libraries to provided better
# performance data when calling applications monitored by other New Relic Agents.
#
cross_application_tracer:
# Set to true to enable cross application tracing.
# Default is true.
enabled: true
# Thread profiler measures wall clock time, CPU time, and method call counts
# in your application's threads as they run.
thread_profiler:
# Set to false to disable the thread profiler.
# Default is true.
enabled: true
#============================== Browser Monitoring ===============================
# New Relic Real User Monitoring gives you insight into the performance real users are
# experiencing with your website. This is accomplished by measuring the time it takes for
# your users' browsers to download and render your web pages by injecting a small amount
# of JavaScript code into the header and footer of each page.
browser_monitoring:
# By default the agent automatically inserts API calls in compiled JSPs to
# inject the monitoring JavaScript into web pages.
# Set this attribute to false to turn off this behavior.
auto_instrument: true
# Set this attribute to false to prevent injection of the monitoring JavaScript.
# Default is true.
enabled: true
# Application Environments
# ------------------------------------------
# Environment specific settings are in this section.
# You can use the environment to override the default settings.
# For example, to change the app_name setting.
# Use -Dnewrelic.environment=<environment> on the Java command line
# to set the environment.
# The default environment is production.
# NOTE if your application has other named environments, you should
# provide configuration settings for these environments here.
development:
<<: *default_settings
app_name: KAMON[Development]
test:
<<: *default_settings
app_name: My Application (Test)
production:
<<: *default_settings
staging:
<<: *default_settings
app_name: My Application (Staging)
