/*
* Copyright (C) 2013 Jakob Odersky
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following disclaimer
* in the documentation and/or other materials provided with the
* distribution.
* * Neither the name of the nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
#include <stdlib.h>
#include <stdio.h>
#include <unistd.h>
#include <errno.h>
#include <termios.h>
#include <fcntl.h>
#include <poll.h>
#include "com_github_jodersky_flow_low_NativeSerial.h"
#include "flow.h"
static bool debug = false;
#define DEBUG(f) if (debug) {f}
void serial_debug(bool value) {
debug = value;
}
int serial_open(const char* port_name, int baud, struct serial_config** serial) {
int fd = open(port_name, O_RDWR | O_NOCTTY | O_NONBLOCK);
if (fd < 0) {
DEBUG(perror("obtain file descriptor"););
if (errno == EACCES) return E_ACCESS_DENIED;
else return E_IO;
}
if (flock(fd, LOCK_EX | LOCK_NB) < 0) {
DEBUG(perror("acquire lock on port"););
close(fd);
return E_BUSY;
}
speed_t bd;
switch (baud) {
case 50: bd = B50; break;
case 75: bd = B75; break;
case 110: bd = B110; break;
case 134: bd = B134; break;
case 150: bd = B150; break;
case 200: bd = B200; break;
case 300: bd = B300; break;
case 600: bd = B600; break;
case 1200: bd = B1200; break;
case 1800: bd = B1800; break;
case 2400: bd = B2400; break;
case 4800: bd = B4800; break;
case 9600: bd = B9600; break;
case 19200: bd = B19200; break;
case 38400: bd = B38400; break;
case 57600: bd = B57600; break;
case 115200: bd = B115200; break;
case 230400: bd = B230400; break;
default:
close(fd);
return E_INVALID_BAUD;
break;
}
/* configure new port settings */
struct termios newtio;
newtio.c_cflag &= ~(PARENB | CSTOPB | CSIZE | CRTSCTS); // 8N1
newtio.c_cflag |= CS8 | CREAD | CLOCAL;
newtio.c_iflag &= ~(IXON | IXOFF | IXANY); // turn off s/w flow ctrl
newtio.c_lflag &= ~(ICANON | ECHO | ECHOE | ISIG); // make raw
newtio.c_oflag &= ~OPOST; // make raw
//see: http://unixwiz.net/techtips/termios-vmin-vtime.html
//newtio.c_cc[VMIN] = 1;
//newtio.c_cc[VTIME] = 2*10/baud;
if (cfsetspeed(&newtio, bd) < 0) {
DEBUG(perror("set baud rate"););
close(fd);
return E_IO;
}
/* load new settings to port */
if (tcflush(fd, TCIOFLUSH) < 0) {
DEBUG(perror("flush serial settings"););
close(fd);
return E_IO;
}
if (tcsetattr(fd, TCSANOW, &newtio) < 0) {
DEBUG(perror("apply serial settings"););
close(fd);
return E_IO;
}
int pipe_fd[2];
if (pipe2(pipe_fd, O_NONBLOCK) < 0) {
DEBUG(perror("open pipe"););
close(fd);
return E_IO;
}
struct serial_config* s = malloc(sizeof(s));
if (s == NULL) {
DEBUG(perror("allocate memory for serial configuration"););
close(fd);
close(pipe_fd[0]);
close(pipe_fd[1]);
return E_IO;
}
s->port_fd = fd;
s->pipe_read_fd = pipe_fd[0];
s->pipe_write_fd = pipe_fd[1];
(*serial) = s;
return 0;
}
int serial_close(struct serial_config* serial) {
if (close(serial->pipe_write_fd) < 0) {
DEBUG(perror("close write end of pipe"););
return E_IO;
}
if (close(serial->pipe_read_fd) < 0) {
DEBUG(perror("close read end of pipe"););
return E_IO;
}
if (flock(serial->port_fd, LOCK_UN) < 0){
DEBUG(perror("release lock on port"););
return E_IO;
}
if (close(serial->port_fd) < 0) {
DEBUG(perror("close port"););
return E_IO;
}
free(serial);
return 0;
}
int serial_read(struct serial_config* serial, unsigned char* buffer, size_t size) {
struct pollfd polls[2];
polls[0].fd = serial->port_fd; // serial poll
polls[0].events = POLLIN;
polls[1].fd = serial->pipe_read_fd; // pipe poll
polls[1].events = POLLIN;
int n = poll(polls,2,-1);
if (n < 0) {
DEBUG(perror("poll"););
return E_IO;
}
if ((polls[0].revents & POLLIN) != 0) {
int r = read(polls[0].fd, buffer, size);
//treat 0 bytes read as an error to avoid problems on disconnect
//anyway, after a poll there should be more than 0 bytes available to read
if (r <= 0) {
DEBUG(perror("read"););
return E_IO;
}
return r;
} else if ((polls[1].revents & POLLIN) != 0) {
return E_INTERRUPT;
} else {
fputs("poll revents: unknown revents\n", stderr);
return E_IO;
}
}
int serial_write(struct serial_config* serial, unsigned char* data, size_t size) {
int r = write(serial->port_fd, data, size);
if (r < 0) {
DEBUG(perror("write"););
return E_IO;
}
return r;
}
int serial_interrupt(struct serial_config* serial) {
int data = 0xffffffff;
//write to pipe to wake up any blocked read thread (self-pipe trick)
if (write(serial->pipe_write_fd, &data, 1) < 0) {
DEBUG(perror("write to pipe for interrupt"););
return E_IO;
}
return 0;
}
// JNI bindings
// ============
inline struct serial_config* j2s(jlong pointer) {
return (struct serial_config*) pointer;
}
inline jlong s2j(struct serial_config* pointer) {
return (jlong) pointer;
}
JNIEXPORT jint JNICALL Java_com_github_jodersky_flow_low_NativeSerial_open
(JNIEnv *env, jclass clazz, jstring port_name, jint baud, jlongArray jserialp)
{
const char *dev = (*env)->GetStringUTFChars(env, port_name, 0);
struct serial_config* serial;
int r = serial_open(dev, baud, &serial);
(*env)->ReleaseStringUTFChars(env, port_name, dev);
long serialp = s2j(serial);
(*env)->SetLongArrayRegion(env, jserialp, 0, 1, &serialp);
return r;
}
JNIEXPORT jint JNICALL Java_com_github_jodersky_flow_low_NativeSerial_close
(JNIEnv * env, jclass clazz, jlong serial)
{
serial_close(j2s(serial));
}
JNIEXPORT jint JNICALL Java_com_github_jodersky_flow_low_NativeSerial_read
(JNIEnv * env, jclass clazz, jlong serial, jbyteArray jbuffer)
{
jsize size = (*env)->GetArrayLength(env, jbuffer);
unsigned char buffer[size];
int n = serial_read(j2s(serial), buffer, size);
if (n < 0) {
return n;
}
(*env)->SetByteArrayRegion(env, jbuffer, 0, n, (signed char *) buffer);
return n;
}
JNIEXPORT jint JNICALL Java_com_github_jodersky_flow_low_NativeSerial_write
(JNIEnv * env, jclass clazz, jlong serial, jbyteArray jbuffer)
{
unsigned char * buffer = (*env)->GetByteArrayElements(env, jbuffer, NULL);
int size = (*env)->GetArrayLength(env, jbuffer);
int r = serial_write(j2s(serial), buffer, size);
(*env)->ReleaseByteArrayElements(env, jbuffer, buffer, JNI_ABORT);
return r;
}
JNIEXPORT jint JNICALL Java_com_github_jodersky_flow_low_NativeSerial_interrupt
(JNIEnv * env, jclass clazz, jlong serial)
{
return serial_interrupt(j2s(serial));
}
JNIEXPORT void JNICALL Java_com_github_jodersky_flow_low_NativeSerial_debug
(JNIEnv *env, jclass clazz, jboolean value)
{
serial_debug((bool) value);
}