/****************************************************************************
* configs/stm32f4discovery/src/up_leds.c
* arch/arm/src/board/up_leds.c
*
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <stdbool.h>
#include <debug.h>
#include <arch/board/board.h>
#include <nuttx/power/pm.h>
#include "chip.h"
#include "up_arch.h"
#include "up_internal.h"
#include "stm32.h"
#include "stm32f4discovery-internal.h"
#ifndef CONFIG_ARCH_LEDS
/****************************************************************************
* Definitions
****************************************************************************/
/* CONFIG_DEBUG_LEDS enables debug output from this file (needs CONFIG_DEBUG
* with CONFIG_DEBUG_VERBOSE too)
*/
#ifdef CONFIG_DEBUG_LEDS
# define leddbg lldbg
# define ledvdbg llvdbg
#else
# define leddbg(x...)
# define ledvdbg(x...)
#endif
/****************************************************************************
* Private Data
****************************************************************************/
/* This array maps an LED number to GPIO pin configuration */
static uint32_t g_ledcfg[BOARD_NLEDS] =
{
GPIO_LED1, GPIO_LED2, GPIO_LED3, GPIO_LED4
};
/****************************************************************************
* Private Function Protototypes
****************************************************************************/
/* LED Power Management */
#ifdef CONFIG_PM
static void led_pm_notify(struct pm_callback_s *cb, enum pm_state_e pmstate);
static int led_pm_prepare(struct pm_callback_s *cb, enum pm_state_e pmstate);
#endif
/****************************************************************************
* Private Data
****************************************************************************/
#ifdef CONFIG_PM
static struct pm_callback_s g_ledscb =
{
.notify = led_pm_notify,
.prepare = led_pm_prepare,
};
#endif
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: led_pm_notify
*
* Description:
* Notify the driver of new power state. This callback is called after
* all drivers have had the opportunity to prepare for the new power state.
*
****************************************************************************/
#ifdef CONFIG_PM
static void led_pm_notify(struct pm_callback_s *cb , enum pm_state_e pmstate)
{
switch (pmstate)
{
case(PM_NORMAL):
{
/* Restore normal LEDs operation */
}
break;
case(PM_IDLE):
{
/* Entering IDLE mode - Turn leds off */
}
break;
case(PM_STANDBY):
{
/* Entering STANDBY mode - Logic for PM_STANDBY goes here */
}
break;
case(PM_SLEEP):
{
/* Entering SLEEP mode - Logic for PM_SLEEP goes here */
}
break;
default:
{
/* Should not get here */
}
break;
}
}
#endif
/****************************************************************************
* Name: led_pm_prepare
*
* Description:
* Request the driver to prepare for a new power state. This is a warning
* that the system is about to enter into a new power state. The driver
* should begin whatever operations that may be required to enter power
* state. The driver may abort the state change mode by returning a
* non-zero value from the callback function.
*
****************************************************************************/
#ifdef CONFIG_PM
static int led_pm_prepare(struct pm_callback_s *cb , enum pm_state_e pmstate)
{
/* No preparation to change power modes is required by the LEDs driver.
* We always accept the state change by returning OK.
*/
return OK;
}
#endif
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: stm32_ledinit
****************************************************************************/
void stm32_ledinit(void)
{
/* Configure LED1-4 GPIOs for output */
stm32_configgpio(GPIO_LED1);
stm32_configgpio(GPIO_LED2);
stm32_configgpio(GPIO_LED3);
stm32_configgpio(GPIO_LED4);
}
/****************************************************************************
* Name: stm32_setled
****************************************************************************/
void stm32_setled(int led, bool ledon)
{
if ((unsigned)led < BOARD_NLEDS)
{
stm32_gpiowrite(g_ledcfg[led], ledon);
}
}
/****************************************************************************
* Name: stm32_setleds
****************************************************************************/
void stm32_setleds(uint8_t ledset)
{
stm32_gpiowrite(GPIO_LED1, (ledset & BOARD_LED1_BIT) == 0);
stm32_gpiowrite(GPIO_LED2, (ledset & BOARD_LED2_BIT) == 0);
stm32_gpiowrite(GPIO_LED3, (ledset & BOARD_LED3_BIT) == 0);
stm32_gpiowrite(GPIO_LED4, (ledset & BOARD_LED4_BIT) == 0);
}
/****************************************************************************
* Name: up_ledpminitialize
****************************************************************************/
#ifdef CONFIG_PM
void up_ledpminitialize(void)
{
/* Register to receive power management callbacks */
int ret = pm_register(&g_ledscb);
if (ret != OK)
{
board_led_on(LED_ASSERTION);
}
}
#endif /* CONFIG_PM */
#endif /* !CONFIG_ARCH_LEDS */
