diff options
author | patacongo <patacongo@42af7a65-404d-4744-a932-0658087f49c3> | 2012-05-06 16:00:16 +0000 |
---|---|---|
committer | patacongo <patacongo@42af7a65-404d-4744-a932-0658087f49c3> | 2012-05-06 16:00:16 +0000 |
commit | d19b70144e2dfb363c07ead39d9ec5a85b46e091 (patch) | |
tree | ed318046fa2502097e8062143d30f449c00af7e5 | |
parent | 42692bfb1645d9c78d7fb358c03aa309a16dfa61 (diff) | |
download | nuttx-d19b70144e2dfb363c07ead39d9ec5a85b46e091.tar.gz nuttx-d19b70144e2dfb363c07ead39d9ec5a85b46e091.tar.bz2 nuttx-d19b70144e2dfb363c07ead39d9ec5a85b46e091.zip |
Add STMPE11 touchscreen logic
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4703 42af7a65-404d-4744-a932-0658087f49c3
-rw-r--r-- | nuttx/Documentation/NuttxPortingGuide.html | 44 | ||||
-rw-r--r-- | nuttx/configs/README.txt | 24 | ||||
-rw-r--r-- | nuttx/drivers/input/Make.defs | 3 | ||||
-rw-r--r-- | nuttx/drivers/input/stmpe11.h | 8 | ||||
-rw-r--r-- | nuttx/drivers/input/stmpe11_adc.c | 23 | ||||
-rw-r--r-- | nuttx/drivers/input/stmpe11_base.c | 12 | ||||
-rw-r--r-- | nuttx/drivers/input/stmpe11_gpio.c | 4 | ||||
-rw-r--r-- | nuttx/drivers/input/stmpe11_tsc.c | 1001 | ||||
-rw-r--r-- | nuttx/include/nuttx/input/stmpe11.h | 108 |
9 files changed, 1171 insertions, 56 deletions
diff --git a/nuttx/Documentation/NuttxPortingGuide.html b/nuttx/Documentation/NuttxPortingGuide.html index 008a414a2..e59308b7c 100644 --- a/nuttx/Documentation/NuttxPortingGuide.html +++ b/nuttx/Documentation/NuttxPortingGuide.html @@ -12,7 +12,7 @@ <h1><big><font color="#3c34ec"> <i>NuttX RTOS Porting Guide</i> </font></big></h1> - <p>Last Updated: April 13, 2011</p> + <p>Last Updated: May 6, 2011</p> </td> </tr> </table> @@ -4672,6 +4672,48 @@ build there are multiple TSC2007 touchscreens, this setting will enable multiple touchscreens with the same driver. </li> + <li> + <code>CONFIG_INPUT_STMPE11</code>: + Enables support for the STMPE11 driver (Needs <code>CONFIG_INPUT</code>) + </li> + <li> + <code>CONFIG_STMPE11_SPI</code>: + Enables support for the SPI interface (not currenly supported) + </li> + <li> + <code>CONFIG_STMPE11_I2C</code>: + Enables support for the I2C interface + </li> + <li> + <code>CONFIG_STMPE11_MULTIPLE </code>: + Can be defined to support multiple STMPE11 devices on board. + </li> + <li> + <code>CONFIG_STMPE11_NPOLLWAITERS</code>: + Maximum number of threads that can be waiting on poll() (ignored if + <code>CONFIG_DISABLE_POLL</code> is set). + </li> + <li> + <code>CONFIG_STMPE11_TSC_DISABLE</code>: + Disable driver touchscreen functionality. + </li> + <li> + <code>CONFIG_STMPE11_ADC_DISABLE</code>: + Disable driver ADC functionality. + </li> + <li> + <code>CONFIG_STMPE11_GPIO_DISABLE</code>: + Disable driver GPIO functionlaity. + </li> + <li> + <code>CONFIG_STMPE11_GPIOINT_DISABLE</code>: + Disable driver GPIO interrupt functionlality (ignored if GPIO + functionality is disabled). + </li> + <li> + <code>CONFIG_STMPE11_TS_DISABLE</code>: + Disable driver temperature sensor functionlaity. + </li> </ul> <h3>Analog Devices</h3> diff --git a/nuttx/configs/README.txt b/nuttx/configs/README.txt index 570eb7524..6f91944b7 100644 --- a/nuttx/configs/README.txt +++ b/nuttx/configs/README.txt @@ -775,6 +775,7 @@ defconfig -- This is a configuration file similar to the Linux CONFIG_INPUT Enables general support for input devices + CONFIG_INPUT_TSC2007 If CONFIG_INPUT is selected, then this setting will enable building of the TI TSC2007 touchscreen driver. @@ -783,6 +784,29 @@ defconfig -- This is a configuration file similar to the Linux there are multiple TSC2007 touchscreens, this setting will enable multiple touchscreens with the same driver. + CONFIG_INPUT_STMPE11 + Enables support for the STMPE11 driver (Needs CONFIG_INPUT) + CONFIG_STMPE11_SPI + Enables support for the SPI interface (not currenly supported) + CONFIG_STMPE11_I2C + Enables support for the I2C interface + CONFIG_STMPE11_MULTIPLE + Can be defined to support multiple STMPE11 devices on board. + CONFIG_STMPE11_NPOLLWAITERS + Maximum number of threads that can be waiting on poll() (ignored if + CONFIG_DISABLE_POLL is set). + CONFIG_STMPE11_TSC_DISABLE + Disable driver touchscreen functionality. + CONFIG_STMPE11_ADC_DISABLE + Disable driver ADC functionality. + CONFIG_STMPE11_GPIO_DISABLE + Disable driver GPIO functionlaity. + CONFIG_STMPE11_GPIOINT_DISABLE + Disable driver GPIO interrupt functionlality (ignored if GPIO + functionality is disabled). + CONFIG_STMPE11_TS_DISABLE + Disable driver temperature sensor functionlaity. + Analog Devices CONFIG_DAC diff --git a/nuttx/drivers/input/Make.defs b/nuttx/drivers/input/Make.defs index c564eb364..c8d24649b 100644 --- a/nuttx/drivers/input/Make.defs +++ b/nuttx/drivers/input/Make.defs @@ -49,6 +49,9 @@ endif ifeq ($(CONFIG_INPUT_STMPE11),y) CSRCS += stmpe11_base.c +ifneq ($(CONFIG_INPUT_STMPE11_TSC_DISABLE),y) + CSRCS += stmpe11_tsc.c +endif ifneq ($(CONFIG_INPUT_STMPE11_GPIO_DISABLE),y) CSRCS += stmpe11_gpio.c endif diff --git a/nuttx/drivers/input/stmpe11.h b/nuttx/drivers/input/stmpe11.h index c12ad2c22..6876fa141 100644 --- a/nuttx/drivers/input/stmpe11.h +++ b/nuttx/drivers/input/stmpe11.h @@ -113,7 +113,7 @@ struct stmpe11_sample_s uint8_t contact; /* Contact state (see enum stmpe11_contact_e) */ uint16_t x; /* Measured X position */ uint16_t y; /* Measured Y position */ - uint16_t z; /* Measured Z position */ + uint8_t z; /* Measured Z index */ }; /* This structure represents the state of the SMTPE11 driver */ @@ -216,11 +216,11 @@ uint16_t stmpe11_getreg16(FAR struct stmpe11_dev_s *priv, uint8_t regaddr); ********************************************************************************************/ #ifndef CONFIG_STMPE11_TSC_DISABLE -void stmpe11_tscint(FAR struct stmpe11_dev_s *priv) weak_function; +void stmpe11_tscworker(FAR struct stmpe11_dev_s *priv) weak_function; #endif /******************************************************************************************** - * Name: stmpe11_gpioint + * Name: stmpe11_gpioworker * * Description: * Handle GPIO interrupt events (this function actually executes in the context of the @@ -229,7 +229,7 @@ void stmpe11_tscint(FAR struct stmpe11_dev_s *priv) weak_function; ********************************************************************************************/ #if !defined(CONFIG_STMPE11_GPIO_DISABLE) && !defined(CONFIG_STMPE11_GPIOINT_DISABLE) -void stmpe11_gpioint(FAR struct stmpe11_dev_s *priv) weak_function; +void stmpe11_gpioworker(FAR struct stmpe11_dev_s *priv) weak_function; #endif #endif /* CONFIG_INPUT && CONFIG_INPUT_STMPE11 */ diff --git a/nuttx/drivers/input/stmpe11_adc.c b/nuttx/drivers/input/stmpe11_adc.c index 011af9847..5b9d045c9 100644 --- a/nuttx/drivers/input/stmpe11_adc.c +++ b/nuttx/drivers/input/stmpe11_adc.c @@ -48,6 +48,7 @@ #include <errno.h> #include <debug.h> +#include <nuttx/arch.h> #include <nuttx/input/stmpe11.h> #include "stmpe11.h" @@ -71,15 +72,14 @@ ****************************************************************************/ /**************************************************************************** - * Name: stmpe11_adctiming + * Name: stmpe11_adcinitialize * * Description: - * Configure overall ADC timing that applies to all pins. + * Configure for ADC mode operation. Set overall ADC ADC timing that + * applies to all pins. * * Input Parameters: * handle - The handle previously returned by stmpe11_instantiate - * ctrl1 - The value of the ADC_CRTL1 register (see above). - * ctrl2 - The value of the ADC_CRTL2 register (see above). * * Returned Value: * Zero is returned on success. Otherwise, a negated errno value is @@ -87,7 +87,7 @@ * ****************************************************************************/ -int stmpe11_adctiming(STMPE11_HANDLE handle, uint8_t ctrl1, uint8_t ctrl2) +int stmpe11_adcinitialize(STMPE11_HANDLE handle) { FAR struct stmpe11_dev_s *priv = (FAR struct stmpe11_dev_s *)handle; uint8_t regval; @@ -111,10 +111,17 @@ int stmpe11_adctiming(STMPE11_HANDLE handle, uint8_t ctrl1, uint8_t ctrl2) regval &= ~SYS_CTRL2_ADC_OFF; stmpe11_putreg8(priv, STMPE11_SYS_CTRL2, regval); - /* Configure the ADC properties */ + /* Select Sample Time, bit number and ADC Reference */ - stmpe11_putreg8(priv, STMPE11_ADC_CTRL1, ctrl1); - stmpe11_putreg8(priv, STMPE11_ADC_CTRL2, ctrl2); + stmpe11_putreg8(priv, STMPE11_ADC_CTRL1, priv->config->ctrl1); + + /* Wait for 20 ms */ + + up_mdelay(20); + + /* Select the ADC clock speed */ + + stmpe11_putreg8(priv, STMPE11_ADC_CTRL2, priv->config->ctrl2); /* Mark ADC initialized */ diff --git a/nuttx/drivers/input/stmpe11_base.c b/nuttx/drivers/input/stmpe11_base.c index 01268f7b7..1e8c7d58a 100644 --- a/nuttx/drivers/input/stmpe11_base.c +++ b/nuttx/drivers/input/stmpe11_base.c @@ -102,9 +102,11 @@ static void stmpe11_worker(FAR void *arg) { /* Dispatch the touchscreen interrupt if it was brought into the link */ - if (stmpe11_tscint) +#ifdef CONFIG_HAVE_WEAKFUNCTIONS + if (stmpe11_tscworker) +#endif { - stmpe11_tscint(priv); + stmpe11_tscworker(priv); } stmpe11_putreg8(priv, STMPE11_INT_STA, (INT_TOUCH_DET|INT_FIFO_TH|INT_FIFO_OFLOW)); @@ -117,9 +119,11 @@ static void stmpe11_worker(FAR void *arg) { /* Dispatch the GPIO interrupt if it was brought into the link */ - if (stmpe11_gpioint) +#ifdef CONFIG_HAVE_WEAKFUNCTIONS + if (stmpe11_gpioworker) +#endif { - stmpe11_gpioint(priv); + stmpe11_gpioworker(priv); } stmpe11_putreg8(priv, STMPE11_INT_STA, INT_GPIO); diff --git a/nuttx/drivers/input/stmpe11_gpio.c b/nuttx/drivers/input/stmpe11_gpio.c index 4fbcc6ca0..82024b4d0 100644 --- a/nuttx/drivers/input/stmpe11_gpio.c +++ b/nuttx/drivers/input/stmpe11_gpio.c @@ -397,7 +397,7 @@ int stmpe11_gpioattach(STMPE11_HANDLE handle, uint8_t pinconfig, #endif /**************************************************************************** - * Name: stmpe11_gpioint + * Name: stmpe11_gpioworker * * Description: * Handle GPIO interrupt events (this function actually executes in the @@ -406,7 +406,7 @@ int stmpe11_gpioattach(STMPE11_HANDLE handle, uint8_t pinconfig, ****************************************************************************/ #ifndef CONFIG_STMPE11_GPIOINT_DISABLE -void stmpe11_gpioint(FAR struct stmpe11_dev_s *priv) +void stmpe11_gpioworker(FAR struct stmpe11_dev_s *priv) { uint8_t regval; uint8_t pinmask; diff --git a/nuttx/drivers/input/stmpe11_tsc.c b/nuttx/drivers/input/stmpe11_tsc.c new file mode 100644 index 000000000..b6d9c3d62 --- /dev/null +++ b/nuttx/drivers/input/stmpe11_tsc.c @@ -0,0 +1,1001 @@ +/**************************************************************************** + * drivers/input/stmpe11_tsc.c + * + * Copyright (C) 2012 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <gnutt@nuttx.org> + * + * References: + * "STMPE811 S-Touch® advanced resistive touchscreen controller with 8-bit + * GPIO expander," Doc ID 14489 Rev 6, CD00186725, STMicroelectronics" + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include <nuttx/config.h> + +#include <sys/types.h> + +#include <stdbool.h> +#include <stdio.h> +#include <unistd.h> +#include <string.h> +#include <fcntl.h> +#include <semaphore.h> + +#include <poll.h> +#include <errno.h> +#include <assert.h> +#include <debug.h> + +#include <nuttx/kmalloc.h> +#include <nuttx/arch.h> +#include <nuttx/fs/fs.h> +#include <nuttx/i2c.h> +#include <nuttx/wqueue.h> + +#include <nuttx/arch.h> +#include <nuttx/input/touchscreen.h> +#include <nuttx/input/stmpe11.h> + +#include "stmpe11.h" + +#if defined(CONFIG_INPUT) && defined(CONFIG_INPUT_STMPE11) && !defined(CONFIG_STMPE11_TSC_DISABLE) + +/**************************************************************************** + * Pre-processor Definitions + ****************************************************************************/ + +#define Direction_IN 0x00 +#define Direction_OUT 0x01 + +#define Polarity_Low 0x00 +#define Polarity_High 0x04 +#define Type_Level 0x00 +#define Type_Edge 0x02 + +#define IO_IT_0 0x01 +#define IO_IT_1 0x02 +#define IO_IT_2 0x04 +#define IO_IT_3 0x08 +#define IO_IT_4 0x10 +#define IO_IT_5 0x20 +#define IO_IT_6 0x40 +#define IO_IT_7 0x80 +#define ALL_IT 0xFF +#define IOE_JOY_IT (uint8_t)(IO_IT_3 | IO_IT_4 | IO_IT_5 | IO_IT_6 | IO_IT_7) +#define IOE_TS_IT (uint8_t)(IO_IT_0 | IO_IT_1 | IO_IT_2) +#define IOE_INMEMS_IT (uint8_t)(IO_IT_2 | IO_IT_3) + +#define EDGE_FALLING 0x01 +#define EDGE_RISING 0x02 + +#define TIMEOUT_MAX 0x3000 /*<! The value of the maximal timeout for I2C waiting loops */ + +/**************************************************************************** + * Private Types + ****************************************************************************/ + +/**************************************************************************** + * Private Function Prototypes + ****************************************************************************/ +/* Internal logic */ + +static void stmpe11_notify(FAR struct stmpe11_dev_s *priv); +static int stmpe11_sample(FAR struct stmpe11_dev_s *priv, + FAR struct stmpe11_sample_s *sample); +static inline int stmpe11_waitsample(FAR struct stmpe11_dev_s *priv, + FAR struct stmpe11_sample_s *sample); + +/* Character driver methods */ + +static int stmpe11_open(FAR struct file *filep); +static int stmpe11_close(FAR struct file *filep); +static ssize_t stmpe11_read(FAR struct file *filep, FAR char *buffer, + size_t len); +static int stmpe11_ioctl(FAR struct file *filep, int cmd, + unsigned long arg); +#ifndef CONFIG_DISABLE_POLL +static int stmpe11_poll(FAR struct file *filep, struct pollfd *fds, + bool setup); +#endif + +/* Initialization logic */ + +static inline void stmpe11_tscinitialize(FAR struct stmpe11_dev_s *priv); + +/**************************************************************************** + * Private Data + ****************************************************************************/ + +/* This the the vtable that supports the character driver interface */ + +static const struct file_operations stmpe11_fops = +{ + stmpe11_open, /* open */ + stmpe11_close, /* close */ + stmpe11_read, /* read */ + 0, /* write */ + 0, /* seek */ + stmpe11_ioctl /* ioctl */ +#ifndef CONFIG_DISABLE_POLL + , stmpe11_poll /* poll */ +#endif +}; + +/**************************************************************************** + * Private Functions + ****************************************************************************/ +/**************************************************************************** + * Name: stmpe11_notify + * + * Description: + * Notify any threads waiting on touchscreen data that data is now + * available for reading. + * + ****************************************************************************/ + +static void stmpe11_notify(FAR struct stmpe11_dev_s *priv) +{ +#ifndef CONFIG_DISABLE_POLL + int i; +#endif + + /* If there are threads waiting for read data, then signal one of them + * that the read data is available. + */ + + if (priv->nwaiters > 0) + { + /* After posting this semaphore, we need to exit because the STMPE11 + * is no longer available. + */ + + sem_post(&priv->waitsem); + } + + /* If there are threads waiting on poll() for STMPE11 data to become available, + * then wake them up now. NOTE: we wake up all waiting threads because we + * do not know that they are going to do. If they all try to read the data, + * then some make end up blocking after all. + */ + +#ifndef CONFIG_DISABLE_POLL + for (i = 0; i < CONFIG_STMPE11_NPOLLWAITERS; i++) + { + struct pollfd *fds = priv->fds[i]; + if (fds) + { + fds->revents |= POLLIN; + ivdbg("Report events: %02x\n", fds->revents); + sem_post(fds->sem); + } + } +#endif +} + +/**************************************************************************** + * Name: stmpe11_sample + * + * Description: + * Check if touchscreen sample data is available now and, if so, return + * the sample data. This is part of the stmpe11_read logic. + * + ****************************************************************************/ + +static int stmpe11_sample(FAR struct stmpe11_dev_s *priv, + FAR struct stmpe11_sample_s *sample) +{ + irqstate_t flags; + int ret = -EAGAIN; + + /* Interrupts me be disabled when this is called to (1) prevent posting + * of semphores from interrupt handlers, and (2) to prevent sampled data + * from changing until it has been reported. + */ + + flags = irqsave(); + + /* Is there new TSC2007 sample data available? */ + + if (priv->penchange) + { + /* Yes.. the state has changed in some way. Return a copy of the + * sampled data. + */ + + memcpy(sample, &priv->sample, sizeof(struct stmpe11_sample_s)); + + /* Now manage state transitions */ + + if (sample->contact == CONTACT_UP) + { + /* Next.. no contract. Increment the ID so that next contact ID will be unique */ + + priv->sample.contact = CONTACT_NONE; + priv->id++; + } + else if (sample->contact == CONTACT_DOWN) + { + /* First report -- next report will be a movement */ + + priv->sample.contact = CONTACT_MOVE; + } + + priv->penchange = false; + ret = OK; + } + + irqrestore(flags); + return ret; +} + +/**************************************************************************** + * Name: stmpe11_waitsample + * + * Description: + * Wait for a sample to become available (this is really part of the + * stmpe11_read logic). + * + ****************************************************************************/ + +static inline int stmpe11_waitsample(FAR struct stmpe11_dev_s *priv, + FAR struct stmpe11_sample_s *sample) +{ + irqstate_t flags; + int ret; + + /* Interrupts me be disabled when this is called to (1) prevent posting + * of semphores from interrupt handlers, and (2) to prevent sampled data + * from changing until it has been reported. + * + * In addition, we will also disable pre-emption to prevent other threads + * from getting control while we muck with the semaphores. + */ + + sched_lock(); + flags = irqsave(); + + /* Now release the semaphore that manages mutually exclusive access to + * the device structure. This may cause other tasks to become ready to + * run, but they cannot run yet because pre-emption is disabled. + */ + + sem_post(&priv->exclsem); + + /* Try to get the a sample... if we cannot, then wait on the semaphore + * that is posted when new sample data is availble. + */ + + while (stmpe11_sample(priv, sample) < 0) + { + /* Wait for a change in the STMPE11 state */ + + priv->nwaiters++; + ret = sem_wait(&priv->waitsem); + priv->nwaiters--; + + if (ret < 0) + { + /* If we are awakened by a signal, then we need to return + * the failure now. + */ + + DEBUGASSERT(errno == EINTR); + ret = -EINTR; + goto errout; + } + } + + /* Re-acquire the the semaphore that manages mutually exclusive access to + * the device structure. We may have to wait here. But we have our sample. + * Interrupts and pre-emption will be re-enabled while we wait. + */ + + ret = sem_wait(&priv->exclsem); + +errout: + /* Then re-enable interrupts. We might get interrupt here and there + * could be a new sample. But no new threads will run because we still + * have pre-emption disabled. + */ + + irqrestore(flags); + + /* Restore pre-emption. We might get suspended here but that is okay + * because we already have our sample. Note: this means that if there + * were two threads reading from the STMPE11 for some reason, the data + * might be read out of order. + */ + + sched_unlock(); + return ret; +} + +/**************************************************************************** + * Name: stmpe11_open + * + * Description: + * Standard character driver open method. + * + ****************************************************************************/ + +static int stmpe11_open(FAR struct file *filep) +{ +#ifdef CONFIG_STMPE11_REFCNT + FAR struct inode *inode; + FAR struct stmpe11_dev_s *priv; + uint8_t tmp; + int ret; + + DEBUGASSERT(filep); + inode = filep->f_inode; + + DEBUGASSERT(inode && inode->i_private); + priv = (FAR struct stmpe11_dev_s *)inode->i_private; + + /* Get exclusive access to the driver data structure */ + + ret = sem_wait(&priv->exclsem); + if (ret < 0) + { + /* This should only happen if the wait was canceled by an signal */ + + DEBUGASSERT(errno == EINTR); + return -EINTR; + } + + /* Increment the reference count */ + + tmp = priv->crefs + 1; + if (tmp == 0) + { + /* More than 255 opens; uint8_t overflows to zero */ + + ret = -EMFILE; + goto errout_with_sem; + } + + /* When the reference increments to 1, this is the first open event + * on the driver.. and an opportunity to do any one-time initialization. + */ + + /* Save the new open count on success */ + + priv->crefs = tmp; + +errout_with_sem: + sem_post(&priv->exclsem); + return ret; +#else + return OK; +#endif +} + +/**************************************************************************** + * Name: stmpe11_close + * + * Description: + * Standard character driver close method. + * + ****************************************************************************/ + +static int stmpe11_close(FAR struct file *filep) +{ +#ifdef CONFIG_STMPE11_REFCNT + FAR struct inode *inode; + FAR struct stmpe11_dev_s *priv; + int ret; + + DEBUGASSERT(filep); + inode = filep->f_inode; + + DEBUGASSERT(inode && inode->i_private); + priv = (FAR struct stmpe11_dev_s *)inode->i_private; + + /* Get exclusive access to the driver data structure */ + + ret = sem_wait(&priv->exclsem); + if (ret < 0) + { + /* This should only happen if the wait was canceled by an signal */ + + DEBUGASSERT(errno == EINTR); + return -EINTR; + } + + /* Decrement the reference count unless it would decrement a negative + * value. When the count decrements to zero, there are no further + * open references to the driver. + */ + + if (priv->crefs >= 1) + { + priv->crefs--; + } + + sem_post(&priv->exclsem); +#endif + return OK; +} + +/**************************************************************************** + * Name: stmpe11_read + * + * Description: + * Standard character driver read method. + * + ****************************************************************************/ + +static ssize_t stmpe11_read(FAR struct file *filep, FAR char *buffer, size_t len) +{ + FAR struct inode *inode; + FAR struct stmpe11_dev_s *priv; + FAR struct touch_sample_s *report; + struct stmpe11_sample_s sample; + int ret; + + DEBUGASSERT(filep); + inode = filep->f_inode; + + DEBUGASSERT(inode && inode->i_private); + priv = (FAR struct stmpe11_dev_s *)inode->i_private; + + /* Verify that the caller has provided a buffer large enough to receive + * the touch data. + */ + + if (len < SIZEOF_TOUCH_SAMPLE_S(1)) + { + /* We could provide logic to break up a touch report into segments and + * handle smaller reads... but why? + */ + + return -ENOSYS; + } + + /* Get exclusive access to the driver data structure */ + + ret = sem_wait(&priv->exclsem); + if (ret < 0) + { + /* This should only happen if the wait was canceled by an signal */ + + DEBUGASSERT(errno == EINTR); + return -EINTR; + } + + /* Try to read sample data. */ + + ret = stmpe11_sample(priv, &sample); + if (ret < 0) + { + /* Sample data is not available now. We would ave to wait to get + * receive sample data. If the user has specified the O_NONBLOCK + * option, then just return an error. + */ + + if (filep->f_oflags & O_NONBLOCK) + { + ret = -EAGAIN; + goto errout; + } + + /* Wait for sample data */ + + ret = stmpe11_waitsample(priv, &sample); + if (ret < 0) + { + /* We might have been awakened by a signal */ + + goto errout; + } + } + + /* In any event, we now have sampled STMPE11 data that we can report + * to the caller. + */ + + report = (FAR struct touch_sample_s *)buffer; + memset(report, 0, SIZEOF_TOUCH_SAMPLE_S(1)); + report->npoints = 1; + report->point[0].id = priv->id; + report->point[0].x = sample.x; + report->point[0].y = sample.y; + report->point[0].pressure = sample.z; + + /* Report the appropriate flags */ + + if (sample.contact == CONTACT_UP) + { + /* Pen is now up */ + + report->point[0].flags = TOUCH_UP | TOUCH_ID_VALID; + } + else + { + if (sample.contact == CONTACT_DOWN) + { + /* First contact */ + + report->point[0].flags = TOUCH_DOWN | TOUCH_ID_VALID | TOUCH_POS_VALID; + } + else /* if (sample->contact == CONTACT_MOVE) */ + { + /* Movement of the same contact */ + + report->point[0].flags = TOUCH_MOVE | TOUCH_ID_VALID | TOUCH_POS_VALID; + } + + /* A pressure measurement of zero means that pressure is not available */ + + if (report->point[0].pressure != 0) + { + report->point[0].flags |= TOUCH_PRESSURE_VALID; + } + } + + ret = SIZEOF_TOUCH_SAMPLE_S(1); + +errout: + sem_post(&priv->exclsem); + return ret; +} + +/**************************************************************************** + * Name: stmpe11_ioctl + * + * Description: + * Standard character driver ioctl method. + * +****************************************************************************/ + +static int stmpe11_ioctl(FAR struct file *filep, int cmd, unsigned long arg) +{ + FAR struct inode *inode; + FAR struct stmpe11_dev_s *priv; + int ret; + + ivdbg("cmd: %d arg: %ld\n", cmd, arg); + DEBUGASSERT(filep); + inode = filep->f_inode; + + DEBUGASSERT(inode && inode->i_private); + priv = (FAR struct stmpe11_dev_s *)inode->i_private; + + /* Get exclusive access to the driver data structure */ + + ret = sem_wait(&priv->exclsem); + if (ret < 0) + { + /* This should only happen if the wait was canceled by an signal */ + + DEBUGASSERT(errno == EINTR); + return -EINTR; + } + + /* Process the IOCTL by command */ + + switch (cmd) + { + case TSIOC_SETFREQUENCY: /* arg: Pointer to uint32_t frequency value */ + { + FAR uint32_t *ptr = (FAR uint32_t *)((uintptr_t)arg); + DEBUGASSERT(priv->config != NULL && ptr != NULL); + priv->config->frequency = I2C_SETFREQUENCY(priv->i2c, *ptr); + } + break; + + case TSIOC_GETFREQUENCY: /* arg: Pointer to uint32_t frequency value */ + { + FAR uint32_t *ptr = (FAR uint32_t *)((uintptr_t)arg); + DEBUGASSERT(priv->config != NULL && ptr != NULL); + *ptr = priv->config->frequency; + } + break; + + default: + ret = -ENOTTY; + break; + } + + sem_post(&priv->exclsem); + return ret; +} + +/**************************************************************************** + * Name: stmpe11_poll + * + * Description: + * Standard character driver poll method. + * + ****************************************************************************/ + +#ifndef CONFIG_DISABLE_POLL +static int stmpe11_poll(FAR struct file *filep, FAR struct pollfd *fds, + bool setup) +{ + FAR struct inode *inode; + FAR struct stmpe11_dev_s *priv; + int ret; + int i; + + ivdbg("setup: %d\n", (int)setup); + DEBUGASSERT(filep && fds); + inode = filep->f_inode; + + DEBUGASSERT(inode && inode->i_private); + priv = (FAR struct stmpe11_dev_s *)inode->i_private; + + /* Are we setting up the poll? Or tearing it down? */ + + ret = sem_wait(&priv->exclsem); + if (ret < 0) + { + /* This should only happen if the wait was canceled by an signal */ + + DEBUGASSERT(errno == EINTR); + return -EINTR; + } + + if (setup) + { + /* Ignore waits that do not include POLLIN */ + + if ((fds->events & POLLIN) == 0) + { + idbg("Missing POLLIN: revents: %08x\n", fds->revents); + ret = -EDEADLK; + goto errout; + } + + /* This is a request to set up the poll. Find an available + * slot for the poll structure reference + */ + + for (i = 0; i < CONFIG_STMPE11_NPOLLWAITERS; i++) + { + /* Find an available slot */ + + if (!priv->fds[i]) + { + /* Bind the poll structure and this slot */ + + priv->fds[i] = fds; + fds->priv = &priv->fds[i]; + break; + } + } + + if (i >= CONFIG_STMPE11_NPOLLWAITERS) + { + idbg("No availabled slot found: %d\n", i); + fds->priv = NULL; + ret = -EBUSY; + goto errout; + } + + /* Should we immediately notify on any of the requested events? */ + + if (priv->penchange) + { + stmpe11_notify(priv); + } + } + else if (fds->priv) + { + /* This is a request to tear down the poll. */ + + struct pollfd **slot = (struct pollfd **)fds->priv; + DEBUGASSERT(slot != NULL); + + /* Remove all memory of the poll setup */ + + *slot = NULL; + fds->priv = NULL; + } + +errout: + sem_post(&priv->exclsem); + return ret; +} +#endif + +/**************************************************************************** + * Name: stmpe11_tscinitialize + * + * Description: + * Initialize the touchscreen controller. This is really a part of the + * stmpe11_register logic, + * + ****************************************************************************/ + +static inline void stmpe11_tscinitialize(FAR struct stmpe11_dev_s *priv) +{ + uint8_t regval = 0; + + /* Enable TSC and ADC functions */ + + regval = stmpe11_getreg8(priv, STMPE11_SYS_CTRL2); + regval &= ~(SYS_CTRL2_TSC_OFF | SYS_CTRL2_ADC_OFF); + stmpe11_putreg8(priv, STMPE11_SYS_CTRL2, regval); + + /* Enable the TSC global interrupts */ + + regval = stmpe11_getreg8(priv, STMPE11_INT_EN); + regval |= (uint32_t)(INT_TOUCH_DET | INT_FIFO_TH | INT_FIFO_OFLOW); + stmpe11_putreg8(priv, STMPE11_INT_EN, regval); + + /* Select Sample Time, bit number and ADC Reference */ + + stmpe11_putreg8(priv, STMPE11_ADC_CTRL1, priv->config->ctrl1); + + /* Wait for 20 ms */ + + up_mdelay(20); + + /* Select the ADC clock speed */ + + stmpe11_putreg8(priv, STMPE11_ADC_CTRL2, priv->config->ctrl2); + + /* Select TSC pins in non-GPIO mode (AF=0) */ + + regval = stmpe11_getreg8(priv, STMPE11_GPIO_AF); + regval &= ~(uint8_t)TSC_PIN_SET; + stmpe11_putreg8(priv, STMPE11_GPIO_AF, regval); + + /* Select 2 nF filter capacitor */ + + stmpe11_putreg8(priv, STMPE11_TSC_CFG, + (TSC_CFG_AVE_CTRL_4SAMPLES | TSC_CFG_TOUCH_DELAY_500US | TSC_CFG_SETTLING_500US)); + + /* Select single point reading */ + + stmpe11_putreg8(priv, STMPE11_FIFO_TH, 1); + + /* Reset and clear the FIFO. */ + + stmpe11_putreg8(priv, STMPE11_FIFO_STA, FIFO_STA_FIFO_RESET); + stmpe11_putreg8(priv, STMPE11_FIFO_STA, 0); + + /* set the data format for Z value: 7 fractional part and 1 whole part */ + + stmpe11_putreg8(priv, STMPE11_TSC_FRACTIONZ, 0x01); + + /* Set the driving capability of the device for TSC pins: 50mA */ + + stmpe11_putreg8(priv, STMPE11_TSC_IDRIVE, TSC_IDRIVE_50MA); + + /* Enable the TSC. Use no tracking index, touch-screen controller + * operation mode (XYZ). + */ + + stmpe11_putreg8(priv, STMPE11_TSC_CTRL, TSC_CTRL_EN); + + /* Clear all the status pending bits */ + + stmpe11_putreg8(priv, STMPE11_INT_STA, INT_ALL); +} + +/**************************************************************************** + * Public Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: stmpe11_register + * + * Description: + * Enable TSC functionality. GPIO4-7 must be available. This function + * will register the touchsceen driver as /dev/inputN where N is the minor + * device number + * + * Input Parameters: + * handle - The handle previously returned by stmpe11_register + * minor - The input device minor number + * + * Returned Value: + * Zero is returned on success. Otherwise, a negated errno value is + * returned to indicate the nature of the failure. + * + ****************************************************************************/ + +int stmpe11_register(STMPE11_HANDLE handle, int minor) +{ + FAR struct stmpe11_dev_s *priv = (FAR struct stmpe11_dev_s *)handle; + int ret; + + DEBUGASSERT(priv); + + /* Get exclusive access to the device structure */ + + ret = sem_wait(&priv->exclsem); + if (ret < 0) + { + int errval = errno; + idbg("sem_wait failed: %d\n", errval); + return -errval; + } + + /* Make sure that the pins (4-7) need by the TSC are not already in use */ + + if ((priv->inuse & TSC_PIN_SET) != 0) + { + idbg("TSC pins is already in-use: %02x\n", priv->inuse); + sem_post(&priv->exclsem); + return -EBUSY; + } + + /* Update the configuration structure to show that the TSC function is allocated */ + + priv->inuse |= TSC_PIN_SET; /* Pins 4-7 are now in-use */ + priv->flags |= STMPE11_FLAGS_TSC_INITIALIZED; /* TSC function is initialized */ + priv->minor = minor; /* Save the minor number */ + + /* Initialize the touchscreen controller */ + + stmpe11_tscinitialize(priv); + + /* Initialize the TS structure to their default values */ + + priv->penchange = false; + priv->threshx = 0; + priv->threshy = 0; + + priv->flags |= STMPE11_FLAGS_GPIO_INITIALIZED; + sem_post(&priv->exclsem); + return OK; +} + +/**************************************************************************** + * Name: stmpe11_tscworker + * + * Description: + * This function is called to handle a TSC interrupt. It is not really + * an interrupt handle because it is called from the STMPE11 "bottom half" + * logic that runs on the worker thread. + * + ****************************************************************************/ + +void stmpe11_tscworker(FAR struct stmpe11_dev_s *priv) +{ + FAR struct stmpe11_config_s *config; /* Convenience pointer */ + bool pendown; /* true: pend is down */ + uint16_t xdiff; /* X difference used in thresholding */ + uint16_t ydiff; /* Y difference used in thresholding */ + uint16_t x; /* X position */ + uint16_t y; /* Y position */ + + ASSERT(priv != NULL); + + /* Get a pointer the callbacks for convenience (and so the code is not so + * ugly). + */ + + config = priv->config; + DEBUGASSERT(config != NULL); + + /* Check if the Touch detect event happened */ + /* Check for pen up or down from the TSC_STA ibit n the STMPE11_TSC_CTRL register. */ + + pendown = (stmpe11_getreg8(priv, STMPE11_TSC_CTRL) & STMPE11_TSC_CTRL) != 0; + + /* Handle the change from pen down to pen up */ + + if (!pendown) + { + /* Ignore the interrupt if the pen was already down (CONTACT_NONE == pen up and + * already reported. CONTACT_UP == pen up, but not reported) + */ + + if (priv->sample.contact == CONTACT_NONE) + { + goto errout; + } + } + else + { + /* Read the next x and y positions */ + + x = stmpe11_getreg16(priv, STMPE11_TSC_DATAX); + y = stmpe11_getreg16(priv, STMPE11_TSC_DATAY); + + /* Perform a threasholding operation so that the results will be more stable */ + + xdiff = x > priv->threshx ? (x - priv->threshx) : (priv->threshx - x); + ydiff = y > priv->threshy ? (y - priv->threshy) : (priv->threshy - y); + + /* When we see a big difference, snap to the new x/y position */ + + if (xdiff + ydiff > 5) + { + priv->threshx = x; + priv->threshy = y; + } + + /* Update the x/y position */ + + priv->sample.x = priv->threshx; + priv->sample.y = priv->threshy; + + /* Update the Z pression index */ + + priv->sample.z = stmpe11_getreg8(priv, STMPE11_TSC_DATAZ); + + /* Clear the interrupt pending bit and enable the FIFO again */ + + stmpe11_putreg8(priv, STMPE11_FIFO_STA, 0x01); + stmpe11_putreg8(priv, STMPE11_FIFO_STA, 0x00); + } + + /* Note the availability of new measurements */ + + if (pendown) + { + /* If this is the first (acknowledged) pend down report, then report + * this as the first contact. If contact == CONTACT_DOWN, it will be + * set to set to CONTACT_MOVE after the contact is first sampled. + */ + + if (priv->sample.contact != CONTACT_MOVE) + { + /* First contact */ + + priv->sample.contact = CONTACT_DOWN; + } + } + else /* if (priv->sample.contact != CONTACT_NONE) */ + { + /* The pen is up. NOTE: We know from a previous test, that this is a + * loss of contact condition. This will be changed to CONTACT_NONE + * after the loss of contact is sampled. + */ + + priv->sample.contact = CONTACT_UP; + } + + /* Indicate the availability of new sample data for this ID */ + + priv->sample.id = priv->id; + priv->penchange = true; + + /* Notify any waiters that nes STMPE11 data is available */ + + stmpe11_notify(priv); + + /* Exit, re-enabling STMPE11 interrupts */ + +errout: + config->enable(config, true); +} + +#endif /* CONFIG_INPUT && CONFIG_INPUT_STMPE11 && !CONFIG_STMPE11_TSC_DISABLE */ + diff --git a/nuttx/include/nuttx/input/stmpe11.h b/nuttx/include/nuttx/input/stmpe11.h index 48cba30a7..0ad5cfb11 100644 --- a/nuttx/include/nuttx/input/stmpe11.h +++ b/nuttx/include/nuttx/input/stmpe11.h @@ -57,8 +57,35 @@ * Pre-Processor Definitions ********************************************************************************************/ /* Configuration ****************************************************************************/ -/* The STMPE811 interfaces with the host CPU via a I2C or SPI interface. The pin IN_1 allows - * the selection of interface protocol at reset state. +/* Prerequisites: CONFIG_INPUT=y + * Other settings that effect the driver: CONFIG_DISABLE_POLL + * + * CONFIG_INPUT_STMPE11 + * Enables support for the STMPE11 driver (Needs CONFIG_INPUT) + * CONFIG_STMPE11_SPI + * Enables support for the SPI interface (not currenly supported) + * CONFIG_STMPE11_I2C + * Enables support for the I2C interface + * CONFIG_STMPE11_MULTIPLE + * Can be defined to support multiple STMPE11 devices on board. + * CONFIG_STMPE11_NPOLLWAITERS + * Maximum number of threads that can be waiting on poll() (ignored if + * CONFIG_DISABLE_POLL is set). + * CONFIG_STMPE11_TSC_DISABLE + * Disable driver touchscreen functionality. + * CONFIG_STMPE11_ADC_DISABLE + * Disable driver ADC functionality. + * CONFIG_STMPE11_GPIO_DISABLE + * Disable driver GPIO functionlaity. + * CONFIG_STMPE11_GPIOINT_DISABLE + * Disable driver GPIO interrupt functionlality (ignored if GPIO functionality is + * disabled). + * CONFIG_STMPE11_TS_DISABLE + * Disable driver temperature sensor functionlaity. + */ + +/* The STMPE811 interfaces with the target CPU via a I2C or SPI interface. The pin IN_1 + * allows the selection of interface protocol at reset state. */ #if !defined(CONFIG_STMPE11_SPI) && !defined(CONFIG_STMPE11_I2C) @@ -235,6 +262,7 @@ /* GPIO set/clear/sta/dir/edge/rising/falling/af registers */ #define GPIO_PIN(n) (1 << (n)) +#define TSC_PIN_SET (0xf0) /* Pins 4-7: Used by touchscreen */ /* ADC control */ @@ -286,32 +314,32 @@ /* Touchscreen controller configuration */ -#define TSWC_CFG_SETTLING_SHIFT (0) /* Bits 0-2: Panel driver settling time */ -#define TSWC_CFG_SETTLING_MASK (7 << TSWC_CFG_SETTLING_SHIFT) -# define TSWC_CFG_SETTLING_10US (0 << TSWC_CFG_SETTLING_SHIFT) -# define TSWC_CFG_SETTLING_100US (1 << TSWC_CFG_SETTLING_SHIFT) -# define TSWC_CFG_SETTLING_500US (2 << TSWC_CFG_SETTLING_SHIFT) -# define TSWC_CFG_SETTLING_1MS (3 << TSWC_CFG_SETTLING_SHIFT) -# define TSWC_CFG_SETTLING_5MS (4 << TSWC_CFG_SETTLING_SHIFT) -# define TSWC_CFG_SETTLING_10MS (5 << TSWC_CFG_SETTLING_SHIFT) -# define TSWC_CFG_SETTLING_50MS (6 << TSWC_CFG_SETTLING_SHIFT) -# define TSWC_CFG_SETTLING_100MS (7 << TSWC_CFG_SETTLING_SHIFT) -#define TSWC_CFG_TOUCH_DELAY_SHIFT (1) /* Bits 3-5: Touch detect delay */ -#define TSWC_CFG_TOUCH_DELAY_MASK (7 << TSWC_CFG_TOUCH_DELAY_SHIFT) -# define TSWC_CFG_TOUCH_DELAY_10US (0 << TSWC_CFG_TOUCH_DELAY_SHIFT) -# define TSWC_CFG_TOUCH_DELAY_50US (1 << TSWC_CFG_TOUCH_DELAY_SHIFT) -# define TSWC_CFG_TOUCH_DELAY_100US (1 << TSWC_CFG_TOUCH_DELAY_SHIFT) -# define TSWC_CFG_TOUCH_DELAY_500US (2 << TSWC_CFG_TOUCH_DELAY_SHIFT) -# define TSWC_CFG_TOUCH_DELAY_1MS (3 << TSWC_CFG_TOUCH_DELAY_SHIFT) -# define TSWC_CFG_TOUCH_DELAY_5MS (4 << TSWC_CFG_TOUCH_DELAY_SHIFT) -# define TSWC_CFG_TOUCH_DELAY_10MS (5 << TSWC_CFG_TOUCH_DELAY_SHIFT) -# define TSWC_CFG_TOUCH_DELAY_50MS (6 << TSWC_CFG_TOUCH_DELAY_SHIFT) -#define TSWC_CFG_AVE_CTRL_SHIFT (6) /* Bits 6-7: Average control */ -#define TSWC_CFG_AVE_CTRL_MASK (3 << TSWC_CFG_AVE_CTRL_SHIFT) -# define TSWC_CFG_AVE_CTRL_1SAMPLE (0 << TSWC_CFG_AVE_CTRL_SHIFT) -# define TSWC_CFG_AVE_CTRL_2SAMPLES (1 << TSWC_CFG_AVE_CTRL_SHIFT) -# define TSWC_CFG_AVE_CTRL_4SAMPLES (2 << TSWC_CFG_AVE_CTRL_SHIFT) -# define TSWC_CFG_AVE_CTRL_8SAMPLES (3 << TSWC_CFG_AVE_CTRL_SHIFT) +#define TSC_CFG_SETTLING_SHIFT (0) /* Bits 0-2: Panel driver settling time */ +#define TSC_CFG_SETTLING_MASK (7 << TSC_CFG_SETTLING_SHIFT) +# define TSC_CFG_SETTLING_10US (0 << TSC_CFG_SETTLING_SHIFT) +# define TSC_CFG_SETTLING_100US (1 << TSC_CFG_SETTLING_SHIFT) +# define TSC_CFG_SETTLING_500US (2 << TSC_CFG_SETTLING_SHIFT) +# define TSC_CFG_SETTLING_1MS (3 << TSC_CFG_SETTLING_SHIFT) +# define TSC_CFG_SETTLING_5MS (4 << TSC_CFG_SETTLING_SHIFT) +# define TSC_CFG_SETTLING_10MS (5 << TSC_CFG_SETTLING_SHIFT) +# define TSC_CFG_SETTLING_50MS (6 << TSC_CFG_SETTLING_SHIFT) +# define TSC_CFG_SETTLING_100MS (7 << TSC_CFG_SETTLING_SHIFT) +#define TSC_CFG_TOUCH_DELAY_SHIFT (1) /* Bits 3-5: Touch detect delay */ +#define TSC_CFG_TOUCH_DELAY_MASK (7 << TSC_CFG_TOUCH_DELAY_SHIFT) +# define TSC_CFG_TOUCH_DELAY_10US (0 << TSC_CFG_TOUCH_DELAY_SHIFT) +# define TSC_CFG_TOUCH_DELAY_50US (1 << TSC_CFG_TOUCH_DELAY_SHIFT) +# define TSC_CFG_TOUCH_DELAY_100US (2 << TSC_CFG_TOUCH_DELAY_SHIFT) +# define TSC_CFG_TOUCH_DELAY_500US (3 << TSC_CFG_TOUCH_DELAY_SHIFT) +# define TSC_CFG_TOUCH_DELAY_1MS (4 << TSC_CFG_TOUCH_DELAY_SHIFT) +# define TSC_CFG_TOUCH_DELAY_5MS (5 << TSC_CFG_TOUCH_DELAY_SHIFT) +# define TSC_CFG_TOUCH_DELAY_10MS (6 << TSC_CFG_TOUCH_DELAY_SHIFT) +# define TSC_CFG_TOUCH_DELAY_50MS (7 << TSC_CFG_TOUCH_DELAY_SHIFT) +#define TSC_CFG_AVE_CTRL_SHIFT (6) /* Bits 6-7: Average control */ +#define TSC_CFG_AVE_CTRL_MASK (3 << TSC_CFG_AVE_CTRL_SHIFT) +# define TSC_CFG_AVE_CTRL_1SAMPLE (0 << TSC_CFG_AVE_CTRL_SHIFT) +# define TSC_CFG_AVE_CTRL_2SAMPLES (1 << TSC_CFG_AVE_CTRL_SHIFT) +# define TSC_CFG_AVE_CTRL_4SAMPLES (2 << TSC_CFG_AVE_CTRL_SHIFT) +# define TSC_CFG_AVE_CTRL_8SAMPLES (3 << TSC_CFG_AVE_CTRL_SHIFT) /* Current status of FIFO */ @@ -328,6 +356,8 @@ /* Touchscreen controller drive I */ #define TSC_IDRIVE (1 << 0) /* Bit 0: MAX current on TSC driving channel */ +# define TSC_IDRIVE_20MA (0) /* 20mA typical, 35mA max */ +# define TSC_IDRIVE_50MA (1 << 0) /* 50mA typical, 80mA max */ /* Touchscreen controller shield */ @@ -427,6 +457,16 @@ struct stmpe11_config_s int irq; /* IRQ number received by interrupt handler. */ #endif + /* These are the timing valuses for ADC CTRL1 and CTRL2. These values + * are only used if either the TSC or the ADC are enabled. These values + * determine the characteristics of sampling. + */ + +#if !defined(CONFIG_STMPE11_ADC_DISABLE) || !defined(CONFIG_STMPE11_TSC_DISABLE) + uint8_t ctrl1; /* Initialization value for ADC CTRL1 */ + uint8_t ctrl2; /* Initialization value for ADC CTRL1 */ +#endif + /* IRQ/GPIO access callbacks. These operations all hidden behind * callbacks to isolate the STMPE11 driver from differences in GPIO * interrupt handling by varying boards and MCUs. If possible, @@ -436,15 +476,11 @@ struct stmpe11_config_s * attach - Attach the STMPE11 interrupt handler to the GPIO interrupt * enable - Enable or disable the GPIO interrupt * clear - Acknowledge/clear any pending GPIO interrupt - * pendown - Return the state of the pen down GPIO input (TSC only) */ int (*attach)(FAR struct stmpe11_config_s *state, xcpt_t isr); void (*enable)(FAR struct stmpe11_config_s *state, bool enable); void (*clear)(FAR struct stmpe11_config_s *state); -#ifndef CONFIG_STMPE11_TSC_DISABLE - bool (*pendown)(FAR struct stmpe11_config_s *state); -#endif }; /* Since the STMPE11 is a multi-function device, no functionality is assumed when the device @@ -600,15 +636,13 @@ EXTERN int stmpe11_gpioattach(STMPE11_HANDLE handle, uint8_t pinconfig, #endif /******************************************************************************************** - * Name: stmpe11_adctiming + * Name: stmpe11_adcinitialize * * Description: - * Configure overall ADC timing that applies to all pins. + * Configure for ADC mode operation. Set overall ADC ADC timing that applies to all pins. * * Input Parameters: * handle - The handle previously returned by stmpe11_instantiate - * ctrl1 - The value of the ADC_CRTL1 register (see above). - * ctrl2 - The value of the ADC_CRTL2 register (see above). * * Returned Value: * Zero is returned on success. Otherwise, a negated errno value is returned to indicate @@ -617,7 +651,7 @@ EXTERN int stmpe11_gpioattach(STMPE11_HANDLE handle, uint8_t pinconfig, ********************************************************************************************/ #ifndef CONFIG_STMPE11_ADC_DISABLE -EXTERN int stmpe11_adctiming(STMPE11_HANDLE handle, uint8_t ctrl1, uint8_t ctrl2); +EXTERN int stmpe11_adcinitialize(STMPE11_HANDLE handle); #endif /******************************************************************************************** |