diff options
author | Lorenz Meier <lm@inf.ethz.ch> | 2013-06-01 00:50:15 +0200 |
---|---|---|
committer | Lorenz Meier <lm@inf.ethz.ch> | 2013-06-01 00:50:15 +0200 |
commit | bdabaab5bb726e012ef841528fb89a7cb6e0101b (patch) | |
tree | f0e6f57b9fb9d404df6d8f23388a1f98a65f14b2 | |
parent | 3faa01af062a46732149d35221c656e0e7f04323 (diff) | |
download | nuttx-bdabaab5bb726e012ef841528fb89a7cb6e0101b.tar.gz nuttx-bdabaab5bb726e012ef841528fb89a7cb6e0101b.tar.bz2 nuttx-bdabaab5bb726e012ef841528fb89a7cb6e0101b.zip |
Updated FMU and IO configs
34 files changed, 3406 insertions, 1582 deletions
diff --git a/nuttx/configs/Kconfig b/nuttx/configs/Kconfig index e2dad70cb..30cf7a5b8 100644 --- a/nuttx/configs/Kconfig +++ b/nuttx/configs/Kconfig @@ -542,6 +542,13 @@ config ARCH_BOARD_PX4FMU_V1 ---help--- PX4 flight management unit v1.x +config ARCH_BOARD_PX4IO_V1 + bool "PX4IO v1.x" + depends on CONFIG_ARCH_CHIP_STM32F100C8 + select ARCH_HAVE_LEDS + ---help--- + PX4 input / output unit v1.x + config ARCH_BOARD_STM32F100RC_GENERIC bool "STMicro STM32F100RC generic board" depends on ARCH_CHIP_STM32F100RC @@ -789,6 +796,7 @@ config ARCH_BOARD default "stm32f3discovery" if ARCH_BOARD_STM32F3_DISCOVERY default "stm32f4discovery" if ARCH_BOARD_STM32F4_DISCOVERY default "px4fmu-v1" if ARCH_BOARD_PX4FMU_V1 + default "px4io-v1" if ARCH_BOARD_PX4IO_V1 default "stm32ldiscovery" if ARCH_BOARD_STM32L_DISCOVERY default "mikroe-stm32f4" if ARCH_BOARD_MIKROE_STM32F4 default "sure-pic32mx" if ARCH_BOARD_SUREPIC32MX diff --git a/nuttx/configs/px4fmu-v1/src/Makefile b/nuttx/configs/px4fmu-v1/src/Makefile index 9b914e52a..6ef8b7d6a 100644 --- a/nuttx/configs/px4fmu-v1/src/Makefile +++ b/nuttx/configs/px4fmu-v1/src/Makefile @@ -1,7 +1,7 @@ ############################################################################ -# configs/stm32f4discovery/src/Makefile +# configs/px4fmu-v1/src/Makefile # -# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved. +# Copyright (C) 2013 Gregory Nutt. All rights reserved. # Author: Gregory Nutt <gnutt@nuttx.org> # # Redistribution and use in source and binary forms, with or without @@ -35,55 +35,24 @@ -include $(TOPDIR)/Make.defs -CFLAGS += -I$(TOPDIR)/sched +CFLAGS += -I$(TOPDIR)/sched -ASRCS = -AOBJS = $(ASRCS:.S=$(OBJEXT)) +ASRCS = +AOBJS = $(ASRCS:.S=$(OBJEXT)) -CSRCS = up_boot.c up_spi.c up_stackcheck.c +CSRCS = empty.c +COBJS = $(CSRCS:.c=$(OBJEXT)) -ifeq ($(CONFIG_HAVE_CXX),y) -CSRCS += up_cxxinitialize.c -endif +SRCS = $(ASRCS) $(CSRCS) +OBJS = $(AOBJS) $(COBJS) -ifeq ($(CONFIG_ARCH_LEDS),y) -CSRCS += up_autoleds.c -else -CSRCS += up_userleds.c -endif - -ifeq ($(CONFIG_STM32_OTGFS),y) -CSRCS += up_usb.c -endif - -ifeq ($(CONFIG_WATCHDOG),y) -CSRCS += up_watchdog.c -endif - -ifeq ($(CONFIG_NSH_ARCHINIT),y) -CSRCS += up_nsh.c -endif - -ifeq ($(CONFIG_IDLE_CUSTOM),y) -CSRCS += up_idle.c -endif - -COBJS = $(CSRCS:.c=$(OBJEXT)) - -SRCS = $(ASRCS) $(CSRCS) -OBJS = $(AOBJS) $(COBJS) - -ARCH_SRCDIR = $(TOPDIR)/arch/$(CONFIG_ARCH)/src -ifeq ($(CONFIG_WINDOWS_NATIVE),y) - CFLAGS += -I$(ARCH_SRCDIR)\chip -I$(ARCH_SRCDIR)\common -I$(ARCH_SRCDIR)\armv7-m -else +ARCH_SRCDIR = $(TOPDIR)/arch/$(CONFIG_ARCH)/src ifeq ($(WINTOOL),y) - CFLAGS += -I "${shell cygpath -w $(ARCH_SRCDIR)/chip}" \ - -I "${shell cygpath -w $(ARCH_SRCDIR)/common}" \ - -I "${shell cygpath -w $(ARCH_SRCDIR)/armv7-m}" + CFLAGS += -I "${shell cygpath -w $(ARCH_SRCDIR)/chip}" \ + -I "${shell cygpath -w $(ARCH_SRCDIR)/common}" \ + -I "${shell cygpath -w $(ARCH_SRCDIR)/armv7-m}" else - CFLAGS += -I$(ARCH_SRCDIR)/chip -I$(ARCH_SRCDIR)/common -I$(ARCH_SRCDIR)/armv7-m -endif + CFLAGS += -I$(ARCH_SRCDIR)/chip -I$(ARCH_SRCDIR)/common -I$(ARCH_SRCDIR)/armv7-m endif all: libboard$(LIBEXT) @@ -112,3 +81,4 @@ distclean: clean $(call DELFILE, .depend) -include Make.dep + diff --git a/nuttx/configs/px4fmu-v1/src/empty.c b/nuttx/configs/px4fmu-v1/src/empty.c new file mode 100644 index 000000000..ace900866 --- /dev/null +++ b/nuttx/configs/px4fmu-v1/src/empty.c @@ -0,0 +1,4 @@ +/* + * There are no source files here, but libboard.a can't be empty, so + * we have this empty source file to keep it company. + */ diff --git a/nuttx/configs/px4fmu-v1/src/px4fmu-v1-internal.h b/nuttx/configs/px4fmu-v1/src/px4fmu-v1-internal.h deleted file mode 100644 index 0639bbd55..000000000 --- a/nuttx/configs/px4fmu-v1/src/px4fmu-v1-internal.h +++ /dev/null @@ -1,137 +0,0 @@ -/**************************************************************************************************** - * configs/stm32f4discovery/src/stm32f4discovery-internal.h - * arch/arm/src/board/stm32f4discovery-internal.n - * - * Copyright (C) 2011-2012 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <gnutt@nuttx.org> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************************************/ - -#ifndef __CONFIGS_PX4FMU_V1_SRC_PX4FMU_V1_INTERNAL_H -#define __CONFIGS_PX4FMU_V1_SRC_PX4FMU_V1_INTERNAL_H - -/**************************************************************************************************** - * Included Files - ****************************************************************************************************/ - -#include <nuttx/config.h> -#include <nuttx/compiler.h> -#include <stdint.h> - -/**************************************************************************************************** - * Definitions - ****************************************************************************************************/ -/* Configuration ************************************************************************************/ -/* How many SPI modules does this chip support? */ - -#if STM32_NSPI < 1 -# undef CONFIG_STM32_SPI1 -# undef CONFIG_STM32_SPI2 -# undef CONFIG_STM32_SPI3 -#elif STM32_NSPI < 2 -# undef CONFIG_STM32_SPI2 -# undef CONFIG_STM32_SPI3 -#elif STM32_NSPI < 3 -# undef CONFIG_STM32_SPI3 -#endif - -/* px4fmu-v1 GPIOs **************************************************************************/ -/* LEDs */ - -#define GPIO_LED1 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN15) -#define GPIO_LED2 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN14) - -/* SPI chip selects */ - -#define GPIO_SPI_CS_GYRO (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTC|GPIO_PIN14) -#define GPIO_SPI_CS_ACCEL (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTC|GPIO_PIN15) -#define GPIO_SPI_CS_MPU (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN0) -#define GPIO_SPI_CS_SDCARD (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTA|GPIO_PIN4) - -/* USB OTG FS - * - * PA9 OTG_FS_VBUS VBUS sensing (also connected to the green LED) - */ - -#define GPIO_OTGFS_VBUS (GPIO_INPUT|GPIO_FLOAT|GPIO_SPEED_100MHz|GPIO_OPENDRAIN|GPIO_PORTA|GPIO_PIN9) - -/**************************************************************************************************** - * Public Types - ****************************************************************************************************/ - -/**************************************************************************************************** - * Public data - ****************************************************************************************************/ - -#ifndef __ASSEMBLY__ - -/**************************************************************************************************** - * Public Functions - ****************************************************************************************************/ - -/**************************************************************************************************** - * Name: stm32_spiinitialize - * - * Description: - * Called to configure SPI chip select GPIO pins for the stm32f4discovery board. - * - ****************************************************************************************************/ - -void weak_function stm32_spiinitialize(void); - -/**************************************************************************************************** - * Name: stm32_usbinitialize - * - * Description: - * Called from stm32_usbinitialize very early in inialization to setup USB-related - * GPIO pins for the STM32F4Discovery board. - * - ****************************************************************************************************/ - -#ifdef CONFIG_STM32_OTGFS -void weak_function stm32_usbinitialize(void); -#endif - -/**************************************************************************************************** - * Name: stm32_usbhost_initialize - * - * Description: - * Called at application startup time to initialize the USB host functionality. This function will - * start a thread that will monitor for device connection/disconnection events. - * - ****************************************************************************************************/ - -#if defined(CONFIG_STM32_OTGFS) && defined(CONFIG_USBHOST) -int stm32_usbhost_initialize(void); -#endif - -#endif /* __ASSEMBLY__ */ -#endif /* __CONFIGS_PX4FMU_V1_SRC_PX4FMU_V1_INTERNAL_H */ - diff --git a/nuttx/configs/px4fmu-v1/src/up_autoleds.c b/nuttx/configs/px4fmu-v1/src/up_autoleds.c deleted file mode 100644 index 440c0cfa9..000000000 --- a/nuttx/configs/px4fmu-v1/src/up_autoleds.c +++ /dev/null @@ -1,235 +0,0 @@ -/**************************************************************************** - * configs/stm32f4discovery/src/up_autoleds.c - * arch/arm/src/board/up_autoleds.c - * - * Copyright (C) 2011-2013 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <gnutt@nuttx.org> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/**************************************************************************** - * Included Files - ****************************************************************************/ - -#include <nuttx/config.h> - -#include <stdint.h> -#include <stdbool.h> -#include <debug.h> - -#include <arch/board/board.h> - -#include "chip.h" -#include "up_arch.h" -#include "up_internal.h" -#include "stm32.h" -#include "px4fmu-v1-internal.h" - -#ifdef CONFIG_ARCH_LEDS - -/**************************************************************************** - * Definitions - ****************************************************************************/ - -/* CONFIG_DEBUG_LEDS enables debug output from this file (needs CONFIG_DEBUG - * with CONFIG_DEBUG_VERBOSE too) - */ - -#ifdef CONFIG_DEBUG_LEDS -# define leddbg lldbg -# define ledvdbg llvdbg -#else -# define leddbg(x...) -# define ledvdbg(x...) -#endif - -/* The following definitions map the encoded LED setting to GPIO settings */ - -#define STM32F4_LED1 (1 << 0) -#define STM32F4_LED2 (1 << 1) - -#define ON_SETBITS_SHIFT (0) -#define ON_CLRBITS_SHIFT (4) -#define OFF_SETBITS_SHIFT (8) -#define OFF_CLRBITS_SHIFT (12) - -#define ON_BITS(v) ((v) & 0xff) -#define OFF_BITS(v) (((v) >> 8) & 0x0ff) -#define SETBITS(b) ((b) & 0x0f) -#define CLRBITS(b) (((b) >> 4) & 0x0f) - -#define ON_SETBITS(v) (SETBITS(ON_BITS(v)) -#define ON_CLRBITS(v) (CLRBITS(ON_BITS(v)) -#define OFF_SETBITS(v) (SETBITS(OFF_BITS(v)) -#define OFF_CLRBITS(v) (CLRBITS(OFF_BITS(v)) - -#define LED_STARTED_ON_SETBITS ((STM32F4_LED1) << ON_SETBITS_SHIFT) -#define LED_STARTED_ON_CLRBITS ((STM32F4_LED2) << ON_CLRBITS_SHIFT) -#define LED_STARTED_OFF_SETBITS ((0) << OFF_SETBITS_SHIFT) -#define LED_STARTED_OFF_CLRBITS ((STM32F4_LED1|STM32F4_LED2) << OFF_CLRBITS_SHIFT) - -#define LED_HEAPALLOCATE_ON_SETBITS ((STM32F4_LED2) << ON_SETBITS_SHIFT) -#define LED_HEAPALLOCATE_ON_CLRBITS ((STM32F4_LED1) << ON_CLRBITS_SHIFT) -#define LED_HEAPALLOCATE_OFF_SETBITS ((0) << OFF_SETBITS_SHIFT) -#define LED_HEAPALLOCATE_OFF_CLRBITS ((STM32F4_LED1|STM32F4_LED2) << OFF_CLRBITS_SHIFT) - -#define LED_IRQSENABLED_ON_SETBITS ((STM32F4_LED1) << ON_SETBITS_SHIFT) -#define LED_IRQSENABLED_ON_CLRBITS ((STM32F4_LED2) << ON_CLRBITS_SHIFT) -#define LED_IRQSENABLED_OFF_SETBITS ((0) << OFF_SETBITS_SHIFT) -#define LED_IRQSENABLED_OFF_CLRBITS ((STM32F4_LED1|STM32F4_LED2) << OFF_CLRBITS_SHIFT) - -#define LED_STACKCREATED_ON_SETBITS ((STM32F4_LED1|STM32F4_LED2) << ON_SETBITS_SHIFT) -#define LED_STACKCREATED_ON_CLRBITS ((0) << ON_CLRBITS_SHIFT) -#define LED_STACKCREATED_OFF_SETBITS ((0) << OFF_SETBITS_SHIFT) -#define LED_STACKCREATED_OFF_CLRBITS ((STM32F4_LED1|STM32F4_LED2) << OFF_CLRBITS_SHIFT) - -#define LED_INIRQ_ON_SETBITS ((STM32F4_LED1) << ON_SETBITS_SHIFT) -#define LED_INIRQ_ON_CLRBITS ((0) << ON_CLRBITS_SHIFT) -#define LED_INIRQ_OFF_SETBITS ((0) << OFF_SETBITS_SHIFT) -#define LED_INIRQ_OFF_CLRBITS ((STM32F4_LED1) << OFF_CLRBITS_SHIFT) - -#define LED_SIGNAL_ON_SETBITS ((STM32F4_LED2) << ON_SETBITS_SHIFT) -#define LED_SIGNAL_ON_CLRBITS ((0) << ON_CLRBITS_SHIFT) -#define LED_SIGNAL_OFF_SETBITS ((0) << OFF_SETBITS_SHIFT) -#define LED_SIGNAL_OFF_CLRBITS ((STM32F4_LED2) << OFF_CLRBITS_SHIFT) - -#define LED_ASSERTION_ON_SETBITS ((STM32F4_LED1|STM32F4_LED2) << ON_SETBITS_SHIFT) -#define LED_ASSERTION_ON_CLRBITS ((0) << ON_CLRBITS_SHIFT) -#define LED_ASSERTION_OFF_SETBITS ((0) << OFF_SETBITS_SHIFT) -#define LED_ASSERTION_OFF_CLRBITS ((STM32F4_LED1|STM32F4_LED2) << OFF_CLRBITS_SHIFT) - -#define LED_PANIC_ON_SETBITS ((STM32F4_LED1|STM32F4_LED2) << ON_SETBITS_SHIFT) -#define LED_PANIC_ON_CLRBITS ((0) << ON_CLRBITS_SHIFT) -#define LED_PANIC_OFF_SETBITS ((0) << OFF_SETBITS_SHIFT) -#define LED_PANIC_OFF_CLRBITS ((STM32F4_LED1|STM32F4_LED2) << OFF_CLRBITS_SHIFT) - -/**************************************************************************** - * Private Data - ****************************************************************************/ - -static const uint16_t g_ledbits[8] = -{ - (LED_STARTED_ON_SETBITS | LED_STARTED_ON_CLRBITS | - LED_STARTED_OFF_SETBITS | LED_STARTED_OFF_CLRBITS), - - (LED_HEAPALLOCATE_ON_SETBITS | LED_HEAPALLOCATE_ON_CLRBITS | - LED_HEAPALLOCATE_OFF_SETBITS | LED_HEAPALLOCATE_OFF_CLRBITS), - - (LED_IRQSENABLED_ON_SETBITS | LED_IRQSENABLED_ON_CLRBITS | - LED_IRQSENABLED_OFF_SETBITS | LED_IRQSENABLED_OFF_CLRBITS), - - (LED_STACKCREATED_ON_SETBITS | LED_STACKCREATED_ON_CLRBITS | - LED_STACKCREATED_OFF_SETBITS | LED_STACKCREATED_OFF_CLRBITS), - - (LED_INIRQ_ON_SETBITS | LED_INIRQ_ON_CLRBITS | - LED_INIRQ_OFF_SETBITS | LED_INIRQ_OFF_CLRBITS), - - (LED_SIGNAL_ON_SETBITS | LED_SIGNAL_ON_CLRBITS | - LED_SIGNAL_OFF_SETBITS | LED_SIGNAL_OFF_CLRBITS), - - (LED_ASSERTION_ON_SETBITS | LED_ASSERTION_ON_CLRBITS | - LED_ASSERTION_OFF_SETBITS | LED_ASSERTION_OFF_CLRBITS), - - (LED_PANIC_ON_SETBITS | LED_PANIC_ON_CLRBITS | - LED_PANIC_OFF_SETBITS | LED_PANIC_OFF_CLRBITS) -}; - -/**************************************************************************** - * Private Functions - ****************************************************************************/ - -static inline void led_clrbits(unsigned int clrbits) -{ - if ((clrbits & STM32F4_LED1) != 0) - { - stm32_gpiowrite(GPIO_LED1, false); - } - - if ((clrbits & STM32F4_LED2) != 0) - { - stm32_gpiowrite(GPIO_LED2, false); - } - -} - -static inline void led_setbits(unsigned int setbits) -{ - if ((setbits & STM32F4_LED1) != 0) - { - stm32_gpiowrite(GPIO_LED1, true); - } - - if ((setbits & STM32F4_LED2) != 0) - { - stm32_gpiowrite(GPIO_LED2, true); - } -} - -static void led_setonoff(unsigned int bits) -{ - led_clrbits(CLRBITS(bits)); - led_setbits(SETBITS(bits)); -} - -/**************************************************************************** - * Public Functions - ****************************************************************************/ - -/**************************************************************************** - * Name: up_ledinit - ****************************************************************************/ - -void up_ledinit(void) -{ - /* Configure LED1-4 GPIOs for output */ - - stm32_configgpio(GPIO_LED1); - stm32_configgpio(GPIO_LED2); -} - -/**************************************************************************** - * Name: up_ledon - ****************************************************************************/ - -void up_ledon(int led) -{ - led_setonoff(ON_BITS(g_ledbits[led])); -} - -/**************************************************************************** - * Name: up_ledoff - ****************************************************************************/ - -void up_ledoff(int led) -{ - led_setonoff(OFF_BITS(g_ledbits[led])); -} - -#endif /* CONFIG_ARCH_LEDS */ diff --git a/nuttx/configs/px4fmu-v1/src/up_boot.c b/nuttx/configs/px4fmu-v1/src/up_boot.c deleted file mode 100644 index ee6f3d59f..000000000 --- a/nuttx/configs/px4fmu-v1/src/up_boot.c +++ /dev/null @@ -1,103 +0,0 @@ -/************************************************************************************ - * configs/stm32f4discovery/src/up_boot.c - * arch/arm/src/board/up_boot.c - * - * Copyright (C) 2011-2012 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <gnutt@nuttx.org> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ************************************************************************************/ - -/************************************************************************************ - * Included Files - ************************************************************************************/ - -#include <nuttx/config.h> - -#include <debug.h> - -#include <arch/board/board.h> - -#include "up_arch.h" -#include "px4fmu-v1-internal.h" - -/************************************************************************************ - * Definitions - ************************************************************************************/ - -/************************************************************************************ - * Private Functions - ************************************************************************************/ - -/************************************************************************************ - * Public Functions - ************************************************************************************/ - -/************************************************************************************ - * Name: stm32_boardinitialize - * - * Description: - * All STM32 architectures must provide the following entry point. This entry point - * is called early in the intitialization -- after all memory has been configured - * and mapped but before any devices have been initialized. - * - ************************************************************************************/ - -void stm32_boardinitialize(void) -{ - /* Configure SPI chip selects if 1) SPI is not disabled, and 2) the weak function - * stm32_spiinitialize() has been brought into the link. - */ - -#if defined(CONFIG_STM32_SPI1) || defined(CONFIG_STM32_SPI3) - if (stm32_spiinitialize) - { - stm32_spiinitialize(); - } -#endif - - /* Initialize USB if the 1) OTG FS controller is in the configuration and 2) - * disabled, and 3) the weak function stm32_usbinitialize() has been brought - * into the build. Presumeably either CONFIG_USBDEV or CONFIG_USBHOST is also - * selected. - */ - -#ifdef CONFIG_STM32_OTGFS - if (stm32_usbinitialize) - { - stm32_usbinitialize(); - } -#endif - - /* Configure on-board LEDs if LED support has been selected. */ - -#ifdef CONFIG_ARCH_LEDS - up_ledinit(); -#endif -} diff --git a/nuttx/configs/px4fmu-v1/src/up_cxxinitialize.c b/nuttx/configs/px4fmu-v1/src/up_cxxinitialize.c deleted file mode 100644 index 402dfb111..000000000 --- a/nuttx/configs/px4fmu-v1/src/up_cxxinitialize.c +++ /dev/null @@ -1,155 +0,0 @@ -/************************************************************************************ - * configs/stm32f4discovery/src/up_cxxinitialize.c - * arch/arm/src/board/up_cxxinitialize.c - * - * Copyright (C) 2012 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <gnutt@nuttx.org> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ************************************************************************************/ - -/************************************************************************************ - * Included Files - ************************************************************************************/ - -#include <nuttx/config.h> - -#include <debug.h> - -#include <nuttx/arch.h> - -#include <arch/stm32/chip.h> -#include "chip.h" - -#if defined(CONFIG_HAVE_CXX) && defined(CONFIG_HAVE_CXXINITIALIZE) - -/************************************************************************************ - * Definitions - ************************************************************************************/ -/* Debug ****************************************************************************/ -/* Non-standard debug that may be enabled just for testing the static constructors */ - -#ifndef CONFIG_DEBUG -# undef CONFIG_DEBUG_CXX -#endif - -#ifdef CONFIG_DEBUG_CXX -# define cxxdbg dbg -# define cxxlldbg lldbg -# ifdef CONFIG_DEBUG_VERBOSE -# define cxxvdbg vdbg -# define cxxllvdbg llvdbg -# else -# define cxxvdbg(x...) -# define cxxllvdbg(x...) -# endif -#else -# define cxxdbg(x...) -# define cxxlldbg(x...) -# define cxxvdbg(x...) -# define cxxllvdbg(x...) -#endif - -/************************************************************************************ - * Private Types - ************************************************************************************/ -/* This type defines one entry in initialization array */ - -typedef void (*initializer_t)(void); - -/************************************************************************************ - * External references - ************************************************************************************/ -/* _sinit and _einit are symbols exported by the linker script that mark the - * beginning and the end of the C++ initialization section. - */ - -extern initializer_t _sinit; -extern initializer_t _einit; - -/* _stext and _etext are symbols exported by the linker script that mark the - * beginning and the end of text. - */ - -extern uint32_t _stext; -extern uint32_t _etext; - -/************************************************************************************ - * Private Functions - ************************************************************************************/ - -/************************************************************************************ - * Public Functions - ************************************************************************************/ - -/**************************************************************************** - * Name: up_cxxinitialize - * - * Description: - * If C++ and C++ static constructors are supported, then this function - * must be provided by board-specific logic in order to perform - * initialization of the static C++ class instances. - * - * This function should then be called in the application-specific - * user_start logic in order to perform the C++ initialization. NOTE - * that no component of the core NuttX RTOS logic is involved; This - * function defintion only provides the 'contract' between application - * specific C++ code and platform-specific toolchain support - * - ***************************************************************************/ - -void up_cxxinitialize(void) -{ - initializer_t *initp; - - cxxdbg("_sinit: %p _einit: %p _stext: %p _etext: %p\n", - &_sinit, &_einit, &_stext, &_etext); - - /* Visit each entry in the initialzation table */ - - for (initp = &_sinit; initp != &_einit; initp++) - { - initializer_t initializer = *initp; - cxxdbg("initp: %p initializer: %p\n", initp, initializer); - - /* Make sure that the address is non-NULL and lies in the text region - * defined by the linker script. Some toolchains may put NULL values - * or counts in the initialization table - */ - - if ((void*)initializer > (void*)&_stext && (void*)initializer < (void*)&_etext) - { - cxxdbg("Calling %p\n", initializer); - initializer(); - } - } -} - -#endif /* CONFIG_HAVE_CXX && CONFIG_HAVE_CXXINITIALIZE */ - diff --git a/nuttx/configs/px4fmu-v1/src/up_idle.c b/nuttx/configs/px4fmu-v1/src/up_idle.c deleted file mode 100644 index 53caf9702..000000000 --- a/nuttx/configs/px4fmu-v1/src/up_idle.c +++ /dev/null @@ -1,119 +0,0 @@ -/**************************************************************************** - * configs/stm32f4discovery/src/up_idle.c - * arch/arm/src/board/up_idle.c - * - * Copyright (C) 2012 Gregory Nutt. All rights reserved. - * Authors: Gregory Nutt <gnutt@nuttx.org> - * Diego Sanchez <dsanchez@nx-engineering.com> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - * - ****************************************************************************/ - -/**************************************************************************** - * Included Files - ****************************************************************************/ - -#include <arch/board/board.h> -#include <nuttx/config.h> - -#include <nuttx/arch.h> -#include <nuttx/clock.h> - -#include <debug.h> -#include <nuttx/rtc.h> -#include <arch/irq.h> - -#include "up_internal.h" -#include "stm32_rcc.h" -#include "stm32_exti.h" - -#include "px4fmu-v1-internal.h" - -/**************************************************************************** - * Pre-processor Definitions - ****************************************************************************/ -/* Configuration ************************************************************/ -/* Does the board support an IDLE LED to indicate that the board is in the - * IDLE state? - */ - -#if defined(CONFIG_ARCH_LEDS) && defined(LED_IDLE) -# define BEGIN_IDLE() up_ledon(LED_IDLE) -# define END_IDLE() up_ledoff(LED_IDLE) -#else -# define BEGIN_IDLE() -# define END_IDLE() -#endif - -/**************************************************************************** - * Private Data - ****************************************************************************/ - -/**************************************************************************** - * Private Functions - ****************************************************************************/ - -#define up_idlepm() - -/**************************************************************************** - * Public Functions - ****************************************************************************/ - -/**************************************************************************** - * Name: up_idle - * - * Description: - * up_idle() is the logic that will be executed when their is no other - * ready-to-run task. This is processor idle time and will continue until - * some interrupt occurs to cause a context switch from the idle task. - * - * Processing in this state may be processor-specific. e.g., this is where - * power management operations might be performed. - * - ****************************************************************************/ - -void up_idle(void) -{ -#if defined(CONFIG_SUPPRESS_INTERRUPTS) || defined(CONFIG_SUPPRESS_TIMER_INTS) - /* If the system is idle and there are no timer interrupts, then process - * "fake" timer interrupts. Hopefully, something will wake up. - */ - - sched_process_timer(); -#else - - /* Perform IDLE mode power management */ - - BEGIN_IDLE(); - up_idlepm(); - END_IDLE(); -#endif -} - diff --git a/nuttx/configs/px4fmu-v1/src/up_nsh.c b/nuttx/configs/px4fmu-v1/src/up_nsh.c deleted file mode 100644 index c26a08539..000000000 --- a/nuttx/configs/px4fmu-v1/src/up_nsh.c +++ /dev/null @@ -1,155 +0,0 @@ -/**************************************************************************** - * config/stm32f4discovery/src/up_nsh.c - * arch/arm/src/board/up_nsh.c - * - * Copyright (C) 2012 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <gnutt@nuttx.org> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/**************************************************************************** - * Included Files - ****************************************************************************/ - -#include <nuttx/config.h> - -#include <stdbool.h> -#include <stdio.h> -#include <debug.h> -#include <errno.h> - -#ifdef CONFIG_SYSTEM_USBMONITOR -# include <apps/usbmonitor.h> -#endif - -#ifdef CONFIG_STM32_SPI3 -# include <nuttx/mmcsd.h> -#endif - -#include "stm32.h" -#include "px4fmu-v1-internal.h" - -/**************************************************************************** - * Pre-Processor Definitions - ****************************************************************************/ - -/* Configuration ************************************************************/ - -#define HAVE_USBDEV 1 -#define HAVE_USBMONITOR 1 - -/* Can't support USB host or device features if USB OTG FS is not enabled */ - -#ifndef CONFIG_STM32_OTGFS -# undef HAVE_USBDEV -# undef HAVE_USBMONITOR -#endif - -/* Can't support USB device is USB device is not enabled */ - -#ifndef CONFIG_USBDEV -# undef HAVE_USBDEV -# undef HAVE_USBMONITOR -#endif - -/* Check if we should enable the USB monitor before starting NSH */ - -#if !defined(CONFIG_USBDEV_TRACE) || !defined(CONFIG_SYSTEM_USBMONITOR) -# undef HAVE_USBMONITOR -#endif - -/* Debug ********************************************************************/ - -#ifdef CONFIG_CPP_HAVE_VARARGS -# ifdef CONFIG_DEBUG -# define message(...) lowsyslog(__VA_ARGS__) -# else -# define message(...) printf(__VA_ARGS__) -# endif -#else -# ifdef CONFIG_DEBUG -# define message lowsyslog -# else -# define message printf -# endif -#endif - -/**************************************************************************** - * Public Functions - ****************************************************************************/ - -/**************************************************************************** - * Name: nsh_archinitialize - * - * Description: - * Perform architecture specific initialization - * - ****************************************************************************/ - -int nsh_archinitialize(void) -{ -#if defined(HAVE_USBMONITOR) || defined(CONFIG_STM32_SPI3) - int ret; -#endif - -#ifdef HAVE_USBMONITOR - /* Start the USB Monitor */ - - ret = usbmonitor_start(0, NULL); - if (ret != OK) - { - message("nsh_archinitialize: Start USB monitor: %d\n", ret); - } -#endif - -#ifdef CONFIG_STM32_SPI3 - message("[boot] Initializing SPI port 3\n"); - struct spi_dev_s *spi3 = up_spiinitialize(3); - - if (!spi3) { - message("[boot] FAILED to initialize SPI port 3\n"); - return -ENODEV; - } - - message("[boot] Successfully initialized SPI port 3\n"); - - /* Now bind the SPI interface to the MMCSD driver */ - ret = mmcsd_spislotinitialize(CONFIG_NSH_MMCSDMINOR, CONFIG_NSH_MMCSDSLOTNO, spi3); - - if (ret != OK) { - message("[boot] FAILED to bind SPI port 3 to the MMCSD driver\n"); - return -ENODEV; - } - - message("[boot] Successfully bound SPI port 3 to the MMCSD driver\n"); -#endif - - return OK; -} diff --git a/nuttx/configs/px4fmu-v1/src/up_spi.c b/nuttx/configs/px4fmu-v1/src/up_spi.c deleted file mode 100644 index 63d1b8520..000000000 --- a/nuttx/configs/px4fmu-v1/src/up_spi.c +++ /dev/null @@ -1,199 +0,0 @@ -/************************************************************************************ - * configs/stm32f4discovery/src/up_spi.c - * arch/arm/src/board/up_spi.c - * - * Copyright (C) 2011-2012 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <gnutt@nuttx.org> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ************************************************************************************/ - -/************************************************************************************ - * Included Files - ************************************************************************************/ - -#include <nuttx/config.h> - -#include <stdint.h> -#include <stdbool.h> -#include <errno.h> -#include <debug.h> - -#include <nuttx/spi.h> -#include <arch/board/board.h> - -#include "up_arch.h" -#include "chip.h" -#include "stm32.h" -#include "px4fmu-v1-internal.h" - -#if defined(CONFIG_STM32_SPI1) || defined(CONFIG_STM32_SPI2) || defined(CONFIG_STM32_SPI3) - -/************************************************************************************ - * Definitions - ************************************************************************************/ - -/* Enables debug output from this file (needs CONFIG_DEBUG too) */ - -#undef SPI_DEBUG /* Define to enable debug */ -#undef SPI_VERBOSE /* Define to enable verbose debug */ - -#ifdef SPI_DEBUG -# define spidbg lldbg -# ifdef SPI_VERBOSE -# define spivdbg lldbg -# else -# define spivdbg(x...) -# endif -#else -# undef SPI_VERBOSE -# define spidbg(x...) -# define spivdbg(x...) -#endif - -/************************************************************************************ - * Private Functions - ************************************************************************************/ - -/************************************************************************************ - * Public Functions - ************************************************************************************/ - -/************************************************************************************ - * Name: stm32_spiinitialize - * - * Description: - * Called to configure SPI chip select GPIO pins for the px4fmu-v1 board. - * - ************************************************************************************/ - -void stm32_spiinitialize(void) -{ -#ifdef CONFIG_STM32_SPI1 - stm32_configgpio(GPIO_SPI_CS_GYRO); - stm32_configgpio(GPIO_SPI_CS_ACCEL); - stm32_configgpio(GPIO_SPI_CS_MPU); - - /* De-activate all peripherals, - * required for some peripheral - * state machines - */ - stm32_gpiowrite(GPIO_SPI_CS_GYRO, 1); - stm32_gpiowrite(GPIO_SPI_CS_ACCEL, 1); - stm32_gpiowrite(GPIO_SPI_CS_MPU, 1); -#endif - -#ifdef CONFIG_STM32_SPI3 - stm32_configgpio(GPIO_SPI_CS_SDCARD); - stm32_gpiowrite(GPIO_SPI_CS_SDCARD, 1); -#endif -} - -/**************************************************************************** - * Name: stm32_spi1/2/3select and stm32_spi1/2/3status - * - * Description: - * The external functions, stm32_spi1/2/3select and stm32_spi1/2/3status must be - * provided by board-specific logic. They are implementations of the select - * and status methods of the SPI interface defined by struct spi_ops_s (see - * include/nuttx/spi.h). All other methods (including up_spiinitialize()) - * are provided by common STM32 logic. To use this common SPI logic on your - * board: - * - * 1. Provide logic in stm32_boardinitialize() to configure SPI chip select - * pins. - * 2. Provide stm32_spi1/2/3select() and stm32_spi1/2/3status() functions in your - * board-specific logic. These functions will perform chip selection and - * status operations using GPIOs in the way your board is configured. - * 3. Add a calls to up_spiinitialize() in your low level application - * initialization logic - * 4. The handle returned by up_spiinitialize() may then be used to bind the - * SPI driver to higher level logic (e.g., calling - * mmcsd_spislotinitialize(), for example, will bind the SPI driver to - * the SPI MMC/SD driver). - * - ****************************************************************************/ - -#ifdef CONFIG_STM32_SPI1 -void stm32_spi1select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected) -{ - /* SPI select is active low, so write !selected to select the device */ - - switch (devid) { - case PX4_SPIDEV_GYRO: - /* Making sure the other peripherals are not selected */ - stm32_gpiowrite(GPIO_SPI_CS_GYRO, !selected); - stm32_gpiowrite(GPIO_SPI_CS_MPU, 1); - stm32_gpiowrite(GPIO_SPI_CS_ACCEL, 1); - break; - - case PX4_SPIDEV_ACCEL: - /* Making sure the other peripherals are not selected */ - stm32_gpiowrite(GPIO_SPI_CS_GYRO, 1); - stm32_gpiowrite(GPIO_SPI_CS_ACCEL, !selected); - stm32_gpiowrite(GPIO_SPI_CS_MPU, 1); - break; - - case PX4_SPIDEV_MPU: - /* Making sure the other peripherals are not selected */ - stm32_gpiowrite(GPIO_SPI_CS_GYRO, 1); - stm32_gpiowrite(GPIO_SPI_CS_MPU, !selected); - stm32_gpiowrite(GPIO_SPI_CS_ACCEL, 1); - break; - - default: - break; - } -} - -uint8_t stm32_spi1status(FAR struct spi_dev_s *dev, enum spi_dev_e devid) -{ - return SPI_STATUS_PRESENT; -} -#endif - -#ifdef CONFIG_STM32_SPI2 -# error SPI2 is not supported on this board. -#endif - -#ifdef CONFIG_STM32_SPI3 -void stm32_spi3select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected) -{ - /* there can only be one device on this bus, so always select it */ - stm32_gpiowrite(GPIO_SPI_CS_SDCARD, !selected); -} - -uint8_t stm32_spi3status(FAR struct spi_dev_s *dev, enum spi_dev_e devid) -{ - /* this is actually bogus, but px4fmu-v1 has no way to sense the presence of an SD card */ - return SPI_STATUS_PRESENT; -} -#endif - -#endif /* CONFIG_STM32_SPI1 || CONFIG_STM32_SPI2 */ diff --git a/nuttx/configs/px4fmu-v1/src/up_stackcheck.c b/nuttx/configs/px4fmu-v1/src/up_stackcheck.c deleted file mode 100644 index e8f02a863..000000000 --- a/nuttx/configs/px4fmu-v1/src/up_stackcheck.c +++ /dev/null @@ -1,40 +0,0 @@ - - -void __cyg_profile_func_enter(void *func, void *caller) __attribute__((naked, no_instrument_function)); -void __cyg_profile_func_exit(void *func, void *caller) __attribute__((naked, no_instrument_function)); -void __stack_overflow_trap(void) __attribute__((naked, no_instrument_function)); - -void -__stack_overflow_trap(void) -{ - /* if we get here, the stack has overflowed */ - asm ( "b ."); -} - -void -__cyg_profile_func_enter(void *func, void *caller) -{ - asm volatile ( - " mrs r2, ipsr \n" /* Check whether we are in interrupt mode */ - " cmp r2, #0 \n" /* since we don't switch r10 on interrupt entry, we */ - " bne 2f \n" /* can't detect overflow of the interrupt stack. */ - " \n" - " sub r2, sp, #68 \n" /* compute stack pointer as though we just stacked a full frame */ - " mrs r1, control \n" /* Test CONTROL.FPCA to see whether we also need room for the FP */ - " tst r1, #4 \n" /* context. */ - " beq 1f \n" - " sub r2, r2, #136 \n" /* subtract FP context frame size */ - "1: \n" - " cmp r2, r10 \n" /* compare stack with limit */ - " bgt 2f \n" /* stack is above limit and thus OK */ - " b __stack_overflow_trap\n" - "2: \n" - " bx lr \n" - ); -} - -void -__cyg_profile_func_exit(void *func, void *caller) -{ - asm volatile("bx lr"); -} diff --git a/nuttx/configs/px4fmu-v1/src/up_usb.c b/nuttx/configs/px4fmu-v1/src/up_usb.c deleted file mode 100644 index ab7d90c68..000000000 --- a/nuttx/configs/px4fmu-v1/src/up_usb.c +++ /dev/null @@ -1,124 +0,0 @@ -/************************************************************************************ - * configs/stm32f4discovery/src/up_usbdev.c - * arch/arm/src/board/up_boot.c - * - * Copyright (C) 2012 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <gnutt@nuttx.org> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ************************************************************************************/ - -/************************************************************************************ - * Included Files - ************************************************************************************/ - -#include <nuttx/config.h> - -#include <sys/types.h> -#include <stdint.h> -#include <stdbool.h> -#include <sched.h> -#include <errno.h> -#include <debug.h> - -#include <nuttx/usb/usbdev.h> -#include <nuttx/usb/usbhost.h> -#include <nuttx/usb/usbdev_trace.h> - -#include "up_arch.h" -#include "stm32.h" -#include "px4fmu-v1-internal.h" - -#ifdef CONFIG_STM32_OTGFS - -/************************************************************************************ - * Pre-processor Definitions - ************************************************************************************/ - -#if defined(CONFIG_USBDEV) -# define HAVE_USB 1 -#else -# warning "CONFIG_STM32_OTGFS is enabled but not CONFIG_USBDEV" -# undef HAVE_USB -#endif - -/************************************************************************************ - * Private Data - ************************************************************************************/ - -/************************************************************************************ - * Private Functions - ************************************************************************************/ - -/************************************************************************************ - * Public Functions - ************************************************************************************/ - -/************************************************************************************ - * Name: stm32_usbinitialize - * - * Description: - * Called from stm32_usbinitialize very early in inialization to setup USB-related - * GPIO pins for the STM32F4Discovery board. - * - ************************************************************************************/ - -void stm32_usbinitialize(void) -{ - /* The OTG FS has an internal soft pull-up. No GPIO configuration is required */ - - /* Configure the OTG FS VBUS sensing GPIO, Power On, and Overcurrent GPIOs */ - -#ifdef CONFIG_STM32_OTGFS - stm32_configgpio(GPIO_OTGFS_VBUS); -#endif -} - -/************************************************************************************ - * Name: stm32_usbsuspend - * - * Description: - * Board logic must provide the stm32_usbsuspend logic if the USBDEV driver is - * used. This function is called whenever the USB enters or leaves suspend mode. - * This is an opportunity for the board logic to shutdown clocks, power, etc. - * while the USB is suspended. - * - ************************************************************************************/ - -#ifdef CONFIG_USBDEV -void stm32_usbsuspend(FAR struct usbdev_s *dev, bool resume) -{ - ulldbg("resume: %d\n", resume); -} -#endif - -#endif /* CONFIG_STM32_OTGFS */ - - - diff --git a/nuttx/configs/px4fmu-v1/src/up_userleds.c b/nuttx/configs/px4fmu-v1/src/up_userleds.c deleted file mode 100644 index 32452120d..000000000 --- a/nuttx/configs/px4fmu-v1/src/up_userleds.c +++ /dev/null @@ -1,134 +0,0 @@ -/**************************************************************************** - * configs/stm32f4discovery/src/up_leds.c - * arch/arm/src/board/up_leds.c - * - * Copyright (C) 2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <gnutt@nuttx.org> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/**************************************************************************** - * Included Files - ****************************************************************************/ - -#include <nuttx/config.h> - -#include <stdint.h> -#include <stdbool.h> -#include <debug.h> - -#include <arch/board/board.h> -#include <nuttx/power/pm.h> - -#include "chip.h" -#include "up_arch.h" -#include "up_internal.h" -#include "stm32.h" -#include "px4fmu-v1-internal.h" - -#ifndef CONFIG_ARCH_LEDS - -/**************************************************************************** - * Definitions - ****************************************************************************/ - -/* CONFIG_DEBUG_LEDS enables debug output from this file (needs CONFIG_DEBUG - * with CONFIG_DEBUG_VERBOSE too) - */ - -#ifdef CONFIG_DEBUG_LEDS -# define leddbg lldbg -# define ledvdbg llvdbg -#else -# define leddbg(x...) -# define ledvdbg(x...) -#endif - -/**************************************************************************** - * Private Data - ****************************************************************************/ -/* This array maps an LED number to GPIO pin configuration */ - -static uint32_t g_ledcfg[BOARD_NLEDS] = -{ - GPIO_LED1, GPIO_LED2 -}; - -/**************************************************************************** - * Private Function Protototypes - ****************************************************************************/ - -/**************************************************************************** - * Private Data - ****************************************************************************/ - -/**************************************************************************** - * Private Functions - ****************************************************************************/ - -/**************************************************************************** - * Public Functions - ****************************************************************************/ - -/**************************************************************************** - * Name: stm32_ledinit - ****************************************************************************/ - -void stm32_ledinit(void) -{ - /* Configure LED1-4 GPIOs for output */ - - stm32_configgpio(GPIO_LED1); - stm32_configgpio(GPIO_LED2); -} - -/**************************************************************************** - * Name: stm32_setled - ****************************************************************************/ - -void stm32_setled(int led, bool ledon) -{ - if ((unsigned)led < BOARD_NLEDS) - { - stm32_gpiowrite(g_ledcfg[led], ledon); - } -} - -/**************************************************************************** - * Name: stm32_setleds - ****************************************************************************/ - -void stm32_setleds(uint8_t ledset) -{ - stm32_gpiowrite(GPIO_LED1, (ledset & BOARD_LED1_BIT) == 0); - stm32_gpiowrite(GPIO_LED2, (ledset & BOARD_LED2_BIT) == 0); -} - -#endif /* !CONFIG_ARCH_LEDS */ diff --git a/nuttx/configs/px4fmu-v1/src/up_watchdog.c b/nuttx/configs/px4fmu-v1/src/up_watchdog.c deleted file mode 100644 index 4bef40f78..000000000 --- a/nuttx/configs/px4fmu-v1/src/up_watchdog.c +++ /dev/null @@ -1,136 +0,0 @@ -/************************************************************************************ - * configs/stm32f4discovery/src/up_watchdog.c - * arch/arm/src/board/up_watchdog.c - * - * Copyright (C) 2012 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <gnutt@nuttx.org> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ************************************************************************************/ - -/************************************************************************************ - * Included Files - ************************************************************************************/ - -#include <nuttx/config.h> - -#include <errno.h> -#include <debug.h> - -#include <nuttx/watchdog.h> -#include <arch/board/board.h> - -#include "stm32_wdg.h" - -#ifdef CONFIG_WATCHDOG - -/************************************************************************************ - * Definitions - ************************************************************************************/ -/* Configuration *******************************************************************/ -/* Wathdog hardware should be enabled */ - -#if !defined(CONFIG_STM32_WWDG) && !defined(CONFIG_STM32_IWDG) -# warning "One of CONFIG_STM32_WWDG or CONFIG_STM32_IWDG must be defined" -#endif - -/* Select the path to the registered watchdog timer device */ - -#ifndef CONFIG_STM32_WDG_DEVPATH -# ifdef CONFIG_EXAMPLES_WATCHDOG_DEVPATH -# define CONFIG_STM32_WDG_DEVPATH CONFIG_EXAMPLES_WATCHDOG_DEVPATH -# else -# define CONFIG_STM32_WDG_DEVPATH "/dev/watchdog0" -# endif -#endif - -/* Use the un-calibrated LSI frequency if we have nothing better */ - -#if defined(CONFIG_STM32_IWDG) && !defined(CONFIG_STM32_LSIFREQ) -# define CONFIG_STM32_LSIFREQ STM32_LSI_FREQUENCY -#endif - -/* Debug ***************************************************************************/ -/* Non-standard debug that may be enabled just for testing the watchdog timer */ - -#ifndef CONFIG_DEBUG -# undef CONFIG_DEBUG_WATCHDOG -#endif - -#ifdef CONFIG_DEBUG_WATCHDOG -# define wdgdbg dbg -# define wdglldbg lldbg -# ifdef CONFIG_DEBUG_VERBOSE -# define wdgvdbg vdbg -# define wdgllvdbg llvdbg -# else -# define wdgvdbg(x...) -# define wdgllvdbg(x...) -# endif -#else -# define wdgdbg(x...) -# define wdglldbg(x...) -# define wdgvdbg(x...) -# define wdgllvdbg(x...) -#endif - -/************************************************************************************ - * Private Functions - ************************************************************************************/ - -/************************************************************************************ - * Public Functions - ************************************************************************************/ - -/**************************************************************************** - * Name: up_wdginitialize() - * - * Description: - * Perform architecuture-specific initialization of the Watchdog hardware. - * This interface must be provided by all configurations using - * apps/examples/watchdog - * - ****************************************************************************/ - -int up_wdginitialize(void) -{ - /* Initialize tha register the watchdog timer device */ - -#if defined(CONFIG_STM32_WWDG) - stm32_wwdginitialize(CONFIG_STM32_WDG_DEVPATH); - return OK; -#elif defined(CONFIG_STM32_IWDG) - stm32_iwdginitialize(CONFIG_STM32_WDG_DEVPATH, CONFIG_STM32_LSIFREQ); - return OK; -#else - return -ENODEV; -#endif -} - -#endif /* CONFIG_WATCHDOG */ diff --git a/nuttx/configs/px4io-v1/Kconfig b/nuttx/configs/px4io-v1/Kconfig new file mode 100644 index 000000000..6bd2e8e21 --- /dev/null +++ b/nuttx/configs/px4io-v1/Kconfig @@ -0,0 +1,8 @@ +# +# For a description of the syntax of this configuration file, +# see misc/tools/kconfig-language.txt. +# + +if ARCH_BOARD_PX4IO_V1 + +endif diff --git a/nuttx/configs/px4io-v1/README.txt b/nuttx/configs/px4io-v1/README.txt new file mode 100755 index 000000000..9b1615f42 --- /dev/null +++ b/nuttx/configs/px4io-v1/README.txt @@ -0,0 +1,806 @@ +README +====== + +This README discusses issues unique to NuttX configurations for the +STMicro STM3210E-EVAL development board. + +Contents +======== + + - Development Environment + - GNU Toolchain Options + - IDEs + - NuttX buildroot Toolchain + - DFU and JTAG + - OpenOCD + - LEDs + - Temperature Sensor + - RTC + - STM3210E-EVAL-specific Configuration Options + - Configurations + +Development Environment +======================= + + Either Linux or Cygwin on Windows can be used for the development environment. + The source has been built only using the GNU toolchain (see below). Other + toolchains will likely cause problems. Testing was performed using the Cygwin + environment because the Raisonance R-Link emulatator and some RIDE7 development tools + were used and those tools works only under Windows. + +GNU Toolchain Options +===================== + + The NuttX make system has been modified to support the following different + toolchain options. + + 1. The CodeSourcery GNU toolchain, + 2. The devkitARM GNU toolchain, + 3. Raisonance GNU toolchain, or + 4. The NuttX buildroot Toolchain (see below). + + All testing has been conducted using the NuttX buildroot toolchain. However, + the make system is setup to default to use the devkitARM toolchain. To use + the CodeSourcery, devkitARM or Raisonance GNU toolchain, you simply need to + add one of the following configuration options to your .config (or defconfig) + file: + + CONFIG_STM32_CODESOURCERYW=y : CodeSourcery under Windows + CONFIG_STM32_CODESOURCERYL=y : CodeSourcery under Linux + CONFIG_STM32_DEVKITARM=y : devkitARM under Windows + CONFIG_STM32_RAISONANCE=y : Raisonance RIDE7 under Windows + CONFIG_STM32_BUILDROOT=y : NuttX buildroot under Linux or Cygwin (default) + + If you are not using CONFIG_STM32_BUILDROOT, then you may also have to modify + the PATH in the setenv.h file if your make cannot find the tools. + + NOTE: the CodeSourcery (for Windows), devkitARM, and Raisonance toolchains are + Windows native toolchains. The CodeSourcey (for Linux) and NuttX buildroot + toolchains are Cygwin and/or Linux native toolchains. There are several limitations + to using a Windows based toolchain in a Cygwin environment. The three biggest are: + + 1. The Windows toolchain cannot follow Cygwin paths. Path conversions are + performed automatically in the Cygwin makefiles using the 'cygpath' utility + but you might easily find some new path problems. If so, check out 'cygpath -w' + + 2. Windows toolchains cannot follow Cygwin symbolic links. Many symbolic links + are used in Nuttx (e.g., include/arch). The make system works around these + problems for the Windows tools by copying directories instead of linking them. + But this can also cause some confusion for you: For example, you may edit + a file in a "linked" directory and find that your changes had no effect. + That is because you are building the copy of the file in the "fake" symbolic + directory. If you use a Windows toolchain, you should get in the habit of + making like this: + + make clean_context all + + An alias in your .bashrc file might make that less painful. + + 3. Dependencies are not made when using Windows versions of the GCC. This is + because the dependencies are generated using Windows pathes which do not + work with the Cygwin make. + + Support has been added for making dependencies with the windows-native toolchains. + That support can be enabled by modifying your Make.defs file as follows: + + - MKDEP = $(TOPDIR)/tools/mknulldeps.sh + + MKDEP = $(TOPDIR)/tools/mkdeps.sh --winpaths "$(TOPDIR)" + + If you have problems with the dependency build (for example, if you are not + building on C:), then you may need to modify tools/mkdeps.sh + + NOTE 1: The CodeSourcery toolchain (2009q1) does not work with default optimization + level of -Os (See Make.defs). It will work with -O0, -O1, or -O2, but not with + -Os. + + NOTE 2: The devkitARM toolchain includes a version of MSYS make. Make sure that + the paths to Cygwin's /bin and /usr/bin directories appear BEFORE the devkitARM + path or will get the wrong version of make. + +IDEs +==== + + NuttX is built using command-line make. It can be used with an IDE, but some + effort will be required to create the project (There is a simple RIDE project + in the RIDE subdirectory). + + Makefile Build + -------------- + Under Eclipse, it is pretty easy to set up an "empty makefile project" and + simply use the NuttX makefile to build the system. That is almost for free + under Linux. Under Windows, you will need to set up the "Cygwin GCC" empty + makefile project in order to work with Windows (Google for "Eclipse Cygwin" - + there is a lot of help on the internet). + + Native Build + ------------ + Here are a few tips before you start that effort: + + 1) Select the toolchain that you will be using in your .config file + 2) Start the NuttX build at least one time from the Cygwin command line + before trying to create your project. This is necessary to create + certain auto-generated files and directories that will be needed. + 3) Set up include pathes: You will need include/, arch/arm/src/stm32, + arch/arm/src/common, arch/arm/src/armv7-m, and sched/. + 4) All assembly files need to have the definition option -D __ASSEMBLY__ + on the command line. + + Startup files will probably cause you some headaches. The NuttX startup file + is arch/arm/src/stm32/stm32_vectors.S. With RIDE, I have to build NuttX + one time from the Cygwin command line in order to obtain the pre-built + startup object needed by RIDE. + +NuttX buildroot Toolchain +========================= + + A GNU GCC-based toolchain is assumed. The files */setenv.sh should + be modified to point to the correct path to the Cortex-M3 GCC toolchain (if + different from the default in your PATH variable). + + If you have no Cortex-M3 toolchain, one can be downloaded from the NuttX + SourceForge download site (https://sourceforge.net/project/showfiles.php?group_id=189573). + This GNU toolchain builds and executes in the Linux or Cygwin environment. + + 1. You must have already configured Nuttx in <some-dir>/nuttx. + + cd tools + ./configure.sh stm3210e-eval/<sub-dir> + + 2. Download the latest buildroot package into <some-dir> + + 3. unpack the buildroot tarball. The resulting directory may + have versioning information on it like buildroot-x.y.z. If so, + rename <some-dir>/buildroot-x.y.z to <some-dir>/buildroot. + + 4. cd <some-dir>/buildroot + + 5. cp configs/cortexm3-defconfig-4.3.3 .config + + 6. make oldconfig + + 7. make + + 8. Edit setenv.h, if necessary, so that the PATH variable includes + the path to the newly built binaries. + + See the file configs/README.txt in the buildroot source tree. That has more + detailed PLUS some special instructions that you will need to follow if you are + building a Cortex-M3 toolchain for Cygwin under Windows. + +DFU and JTAG +============ + + Enbling Support for the DFU Bootloader + -------------------------------------- + The linker files in these projects can be configured to indicate that you + will be loading code using STMicro built-in USB Device Firmware Upgrade (DFU) + loader or via some JTAG emulator. You can specify the DFU bootloader by + adding the following line: + + CONFIG_STM32_DFU=y + + to your .config file. Most of the configurations in this directory are set + up to use the DFU loader. + + If CONFIG_STM32_DFU is defined, the code will not be positioned at the beginning + of FLASH (0x08000000) but will be offset to 0x08003000. This offset is needed + to make space for the DFU loader and 0x08003000 is where the DFU loader expects + to find new applications at boot time. If you need to change that origin for some + other bootloader, you will need to edit the file(s) ld.script.dfu for each + configuration. + + The DFU SE PC-based software is available from the STMicro website, + http://www.st.com. General usage instructions: + + 1. Convert the NuttX Intel Hex file (nuttx.ihx) into a special DFU + file (nuttx.dfu)... see below for details. + 2. Connect the STM3210E-EVAL board to your computer using a USB + cable. + 3. Start the DFU loader on the STM3210E-EVAL board. You do this by + resetting the board while holding the "Key" button. Windows should + recognize that the DFU loader has been installed. + 3. Run the DFU SE program to load nuttx.dfu into FLASH. + + What if the DFU loader is not in FLASH? The loader code is available + inside of the Demo dirctory of the USBLib ZIP file that can be downloaded + from the STMicro Website. You can build it using RIDE (or other toolchains); + you will need a JTAG emulator to burn it into FLASH the first time. + + In order to use STMicro's built-in DFU loader, you will have to get + the NuttX binary into a special format with a .dfu extension. The + DFU SE PC_based software installation includes a file "DFU File Manager" + conversion program that a file in Intel Hex format to the special DFU + format. When you successfully build NuttX, you will find a file called + nutt.ihx in the top-level directory. That is the file that you should + provide to the DFU File Manager. You will need to rename it to nuttx.hex + in order to find it with the DFU File Manager. You will end up with + a file called nuttx.dfu that you can use with the STMicro DFU SE program. + + Enabling JTAG + ------------- + If you are not using the DFU, then you will probably also need to enable + JTAG support. By default, all JTAG support is disabled but there NuttX + configuration options to enable JTAG in various different ways. + + These configurations effect the setting of the SWJ_CFG[2:0] bits in the AFIO + MAPR register. These bits are used to configure the SWJ and trace alternate function I/Os. The SWJ (SerialWire JTAG) supports JTAG or SWD access to the + Cortex debug port. The default state in this port is for all JTAG support + to be disable. + + CONFIG_STM32_JTAG_FULL_ENABLE - sets SWJ_CFG[2:0] to 000 which enables full + SWJ (JTAG-DP + SW-DP) + + CONFIG_STM32_JTAG_NOJNTRST_ENABLE - sets SWJ_CFG[2:0] to 001 which enable + full SWJ (JTAG-DP + SW-DP) but without JNTRST. + + CONFIG_STM32_JTAG_SW_ENABLE - sets SWJ_CFG[2:0] to 010 which would set JTAG-DP + disabled and SW-DP enabled + + The default setting (none of the above defined) is SWJ_CFG[2:0] set to 100 + which disable JTAG-DP and SW-DP. + +OpenOCD +======= + +I have also used OpenOCD with the STM3210E-EVAL. In this case, I used +the Olimex USB ARM OCD. See the script in configs/stm3210e-eval/tools/oocd.sh +for more information. Using the script: + +1) Start the OpenOCD GDB server + + cd <nuttx-build-directory> + configs/stm3210e-eval/tools/oocd.sh $PWD + +2) Load Nuttx + + cd <nuttx-built-directory> + arm-none-eabi-gdb nuttx + gdb> target remote localhost:3333 + gdb> mon reset + gdb> mon halt + gdb> load nuttx + +3) Running NuttX + + gdb> mon reset + gdb> c + +LEDs +==== + +The STM3210E-EVAL board has four LEDs labeled LD1, LD2, LD3 and LD4 on the +board.. These LEDs are not used by the board port unless CONFIG_ARCH_LEDS is +defined. In that case, the usage by the board port is defined in +include/board.h and src/up_leds.c. The LEDs are used to encode OS-related +events as follows: + + SYMBOL Meaning LED1* LED2 LED3 LED4 + ---------------- ----------------------- ----- ----- ----- ----- + LED_STARTED NuttX has been started ON OFF OFF OFF + LED_HEAPALLOCATE Heap has been allocated OFF ON OFF OFF + LED_IRQSENABLED Interrupts enabled ON ON OFF OFF + LED_STACKCREATED Idle stack created OFF OFF ON OFF + LED_INIRQ In an interrupt** ON N/C N/C OFF + LED_SIGNAL In a signal handler*** N/C ON N/C OFF + LED_ASSERTION An assertion failed ON ON N/C OFF + LED_PANIC The system has crashed N/C N/C N/C ON + LED_IDLE STM32 is is sleep mode (Optional, not used) + + * If LED1, LED2, LED3 are statically on, then NuttX probably failed to boot + and these LEDs will give you some indication of where the failure was + ** The normal state is LED3 ON and LED1 faintly glowing. This faint glow + is because of timer interupts that result in the LED being illuminated + on a small proportion of the time. +*** LED2 may also flicker normally if signals are processed. + +Temperature Sensor +================== + +Support for the on-board LM-75 temperature sensor is available. This supported +has been verified, but has not been included in any of the available the +configurations. To set up the temperature sensor, add the following to the +NuttX configuration file + + CONFIG_I2C=y + CONFIG_I2C_LM75=y + +Then you can implement logic like the following to use the temperature sensor: + + #include <nuttx/sensors/lm75.h> + #include <arch/board/board.h> + + ret = stm32_lm75initialize("/dev/temp"); /* Register the temperature sensor */ + fd = open("/dev/temp", O_RDONLY); /* Open the temperature sensor device */ + ret = ioctl(fd, SNIOC_FAHRENHEIT, 0); /* Select Fahrenheit */ + bytesread = read(fd, buffer, 8*sizeof(b16_t)); /* Read temperature samples */ + +More complex temperature sensor operations are also available. See the IOCTAL +commands enumerated in include/nuttx/sensors/lm75.h. Also read the descriptions +of the stm32_lm75initialize() and stm32_lm75attach() interfaces in the +arch/board/board.h file (sames as configs/stm3210e-eval/include/board.h). + +RTC +=== + + The STM32 RTC may configured using the following settings. + + CONFIG_RTC - Enables general support for a hardware RTC. Specific + architectures may require other specific settings. + CONFIG_RTC_HIRES - The typical RTC keeps time to resolution of 1 + second, usually supporting a 32-bit time_t value. In this case, + the RTC is used to "seed" the normal NuttX timer and the + NuttX timer provides for higher resoution time. If CONFIG_RTC_HIRES + is enabled in the NuttX configuration, then the RTC provides higher + resolution time and completely replaces the system timer for purpose of + date and time. + CONFIG_RTC_FREQUENCY - If CONFIG_RTC_HIRES is defined, then the + frequency of the high resolution RTC must be provided. If CONFIG_RTC_HIRES + is not defined, CONFIG_RTC_FREQUENCY is assumed to be one. + CONFIG_RTC_ALARM - Enable if the RTC hardware supports setting of an alarm. + A callback function will be executed when the alarm goes off + + In hi-res mode, the STM32 RTC operates only at 16384Hz. Overflow interrupts + are handled when the 32-bit RTC counter overflows every 3 days and 43 minutes. + A BKP register is incremented on each overflow interrupt creating, effectively, + a 48-bit RTC counter. + + In the lo-res mode, the RTC operates at 1Hz. Overflow interrupts are not handled + (because the next overflow is not expected until the year 2106. + + WARNING: Overflow interrupts are lost whenever the STM32 is powered down. The + overflow interrupt may be lost even if the STM32 is powered down only momentarily. + Therefore hi-res solution is only useful in systems where the power is always on. + +STM3210E-EVAL-specific Configuration Options +============================================ + + CONFIG_ARCH - Identifies the arch/ subdirectory. This should + be set to: + + CONFIG_ARCH=arm + + CONFIG_ARCH_family - For use in C code: + + CONFIG_ARCH_ARM=y + + CONFIG_ARCH_architecture - For use in C code: + + CONFIG_ARCH_CORTEXM3=y + + CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory + + CONFIG_ARCH_CHIP=stm32 + + CONFIG_ARCH_CHIP_name - For use in C code to identify the exact + chip: + + CONFIG_ARCH_CHIP_STM32F103ZET6 + + CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG - Enables special STM32 clock + configuration features. + + CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG=n + + CONFIG_ARCH_BOARD - Identifies the configs subdirectory and + hence, the board that supports the particular chip or SoC. + + CONFIG_ARCH_BOARD=stm3210e_eval (for the STM3210E-EVAL development board) + + CONFIG_ARCH_BOARD_name - For use in C code + + CONFIG_ARCH_BOARD_STM3210E_EVAL=y + + CONFIG_ARCH_LOOPSPERMSEC - Must be calibrated for correct operation + of delay loops + + CONFIG_ENDIAN_BIG - define if big endian (default is little + endian) + + CONFIG_DRAM_SIZE - Describes the installed DRAM (SRAM in this case): + + CONFIG_DRAM_SIZE=0x00010000 (64Kb) + + CONFIG_DRAM_START - The start address of installed DRAM + + CONFIG_DRAM_START=0x20000000 + + CONFIG_DRAM_END - Last address+1 of installed RAM + + CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) + + CONFIG_ARCH_IRQPRIO - The STM32F103Z supports interrupt prioritization + + CONFIG_ARCH_IRQPRIO=y + + CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to boards that + have LEDs + + CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt + stack. If defined, this symbol is the size of the interrupt + stack in bytes. If not defined, the user task stacks will be + used during interrupt handling. + + CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions + + CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture. + + CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that + cause a 100 second delay during boot-up. This 100 second delay + serves no purpose other than it allows you to calibratre + CONFIG_ARCH_LOOPSPERMSEC. You simply use a stop watch to measure + the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until + the delay actually is 100 seconds. + + Individual subsystems can be enabled: + AHB + --- + CONFIG_STM32_DMA1 + CONFIG_STM32_DMA2 + CONFIG_STM32_CRC + CONFIG_STM32_FSMC + CONFIG_STM32_SDIO + + APB1 + ---- + CONFIG_STM32_TIM2 + CONFIG_STM32_TIM3 + CONFIG_STM32_TIM4 + CONFIG_STM32_TIM5 + CONFIG_STM32_TIM6 + CONFIG_STM32_TIM7 + CONFIG_STM32_WWDG + CONFIG_STM32_SPI2 + CONFIG_STM32_SPI4 + CONFIG_STM32_USART2 + CONFIG_STM32_USART3 + CONFIG_STM32_UART4 + CONFIG_STM32_UART5 + CONFIG_STM32_I2C1 + CONFIG_STM32_I2C2 + CONFIG_STM32_USB + CONFIG_STM32_CAN + CONFIG_STM32_BKP + CONFIG_STM32_PWR + CONFIG_STM32_DAC1 + CONFIG_STM32_DAC2 + CONFIG_STM32_USB + + APB2 + ---- + CONFIG_STM32_ADC1 + CONFIG_STM32_ADC2 + CONFIG_STM32_TIM1 + CONFIG_STM32_SPI1 + CONFIG_STM32_TIM8 + CONFIG_STM32_USART1 + CONFIG_STM32_ADC3 + + Timer and I2C devices may need to the following to force power to be applied + unconditionally at power up. (Otherwise, the device is powered when it is + initialized). + + CONFIG_STM32_FORCEPOWER + + Timer devices may be used for different purposes. One special purpose is + to generate modulated outputs for such things as motor control. If CONFIG_STM32_TIMn + is defined (as above) then the following may also be defined to indicate that + the timer is intended to be used for pulsed output modulation, ADC conversion, + or DAC conversion. Note that ADC/DAC require two definition: Not only do you have + to assign the timer (n) for used by the ADC or DAC, but then you also have to + configure which ADC or DAC (m) it is assigned to. + + CONFIG_STM32_TIMn_PWM Reserve timer n for use by PWM, n=1,..,8 + CONFIG_STM32_TIMn_ADC Reserve timer n for use by ADC, n=1,..,8 + CONFIG_STM32_TIMn_ADCm Reserve timer n to trigger ADCm, n=1,..,8, m=1,..,3 + CONFIG_STM32_TIMn_DAC Reserve timer n for use by DAC, n=1,..,8 + CONFIG_STM32_TIMn_DACm Reserve timer n to trigger DACm, n=1,..,8, m=1,..,2 + + For each timer that is enabled for PWM usage, we need the following additional + configuration settings: + + CONFIG_STM32_TIMx_CHANNEL - Specifies the timer output channel {1,..,4} + + NOTE: The STM32 timers are each capable of generating different signals on + each of the four channels with different duty cycles. That capability is + not supported by this driver: Only one output channel per timer. + + Alternate pin mappings (should not be used with the STM3210E-EVAL board): + + CONFIG_STM32_TIM1_FULL_REMAP + CONFIG_STM32_TIM1_PARTIAL_REMAP + CONFIG_STM32_TIM2_FULL_REMAP + CONFIG_STM32_TIM2_PARTIAL_REMAP_1 + CONFIG_STM32_TIM2_PARTIAL_REMAP_2 + CONFIG_STM32_TIM3_FULL_REMAP + CONFIG_STM32_TIM3_PARTIAL_REMAP + CONFIG_STM32_TIM4_REMAP + CONFIG_STM32_USART1_REMAP + CONFIG_STM32_USART2_REMAP + CONFIG_STM32_USART3_FULL_REMAP + CONFIG_STM32_USART3_PARTIAL_REMAP + CONFIG_STM32_SPI1_REMAP + CONFIG_STM32_SPI3_REMAP + CONFIG_STM32_I2C1_REMAP + CONFIG_STM32_CAN1_FULL_REMAP + CONFIG_STM32_CAN1_PARTIAL_REMAP + CONFIG_STM32_CAN2_REMAP + + JTAG Enable settings (by default JTAG-DP and SW-DP are disabled): + CONFIG_STM32_JTAG_FULL_ENABLE - Enables full SWJ (JTAG-DP + SW-DP) + CONFIG_STM32_JTAG_NOJNTRST_ENABLE - Enables full SWJ (JTAG-DP + SW-DP) + but without JNTRST. + CONFIG_STM32_JTAG_SW_ENABLE - Set JTAG-DP disabled and SW-DP enabled + + STM32F103Z specific device driver settings + + CONFIG_U[S]ARTn_SERIAL_CONSOLE - selects the USARTn (n=1,2,3) or UART + m (m=4,5) for the console and ttys0 (default is the USART1). + CONFIG_U[S]ARTn_RXBUFSIZE - Characters are buffered as received. + This specific the size of the receive buffer + CONFIG_U[S]ARTn_TXBUFSIZE - Characters are buffered before + being sent. This specific the size of the transmit buffer + CONFIG_U[S]ARTn_BAUD - The configure BAUD of the UART. Must be + CONFIG_U[S]ARTn_BITS - The number of bits. Must be either 7 or 8. + CONFIG_U[S]ARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity + CONFIG_U[S]ARTn_2STOP - Two stop bits + + CONFIG_STM32_SPI_INTERRUPTS - Select to enable interrupt driven SPI + support. Non-interrupt-driven, poll-waiting is recommended if the + interrupt rate would be to high in the interrupt driven case. + CONFIG_STM32_SPI_DMA - Use DMA to improve SPI transfer performance. + Cannot be used with CONFIG_STM32_SPI_INTERRUPT. + + CONFIG_SDIO_DMA - Support DMA data transfers. Requires CONFIG_STM32_SDIO + and CONFIG_STM32_DMA2. + CONFIG_SDIO_PRI - Select SDIO interrupt prority. Default: 128 + CONFIG_SDIO_DMAPRIO - Select SDIO DMA interrupt priority. + Default: Medium + CONFIG_SDIO_WIDTH_D1_ONLY - Select 1-bit transfer mode. Default: + 4-bit transfer mode. + + STM3210E-EVAL CAN Configuration + + CONFIG_CAN - Enables CAN support (one or both of CONFIG_STM32_CAN1 or + CONFIG_STM32_CAN2 must also be defined) + CONFIG_CAN_EXTID - Enables support for the 29-bit extended ID. Default + Standard 11-bit IDs. + CONFIG_CAN_FIFOSIZE - The size of the circular buffer of CAN messages. + Default: 8 + CONFIG_CAN_NPENDINGRTR - The size of the list of pending RTR requests. + Default: 4 + CONFIG_CAN_LOOPBACK - A CAN driver may or may not support a loopback + mode for testing. The STM32 CAN driver does support loopback mode. + CONFIG_CAN1_BAUD - CAN1 BAUD rate. Required if CONFIG_STM32_CAN1 is defined. + CONFIG_CAN2_BAUD - CAN1 BAUD rate. Required if CONFIG_STM32_CAN2 is defined. + CONFIG_CAN_TSEG1 - The number of CAN time quanta in segment 1. Default: 6 + CONFIG_CAN_TSEG2 - the number of CAN time quanta in segment 2. Default: 7 + CONFIG_CAN_REGDEBUG - If CONFIG_DEBUG is set, this will generate an + dump of all CAN registers. + + STM3210E-EVAL LCD Hardware Configuration + + CONFIG_LCD_LANDSCAPE - Define for 320x240 display "landscape" + support. Default is this 320x240 "landscape" orientation + (this setting is informative only... not used). + CONFIG_LCD_PORTRAIT - Define for 240x320 display "portrait" + orientation support. In this orientation, the STM3210E-EVAL's + LCD ribbon cable is at the bottom of the display. Default is + 320x240 "landscape" orientation. + CONFIG_LCD_RPORTRAIT - Define for 240x320 display "reverse + portrait" orientation support. In this orientation, the + STM3210E-EVAL's LCD ribbon cable is at the top of the display. + Default is 320x240 "landscape" orientation. + CONFIG_LCD_BACKLIGHT - Define to support a backlight. + CONFIG_LCD_PWM - If CONFIG_STM32_TIM1 is also defined, then an + adjustable backlight will be provided using timer 1 to generate + various pulse widthes. The granularity of the settings is + determined by CONFIG_LCD_MAXPOWER. If CONFIG_LCD_PWM (or + CONFIG_STM32_TIM1) is not defined, then a simple on/off backlight + is provided. + CONFIG_LCD_RDSHIFT - When reading 16-bit gram data, there appears + to be a shift in the returned data. This value fixes the offset. + Default 5. + + The LCD driver dynamically selects the LCD based on the reported LCD + ID value. However, code size can be reduced by suppressing support for + individual LCDs using: + + CONFIG_STM32_AM240320_DISABLE + CONFIG_STM32_SPFD5408B_DISABLE + CONFIG_STM32_R61580_DISABLE + +Configurations +============== + +Each STM3210E-EVAL configuration is maintained in a sudirectory and +can be selected as follow: + + cd tools + ./configure.sh stm3210e-eval/<subdir> + cd - + . ./setenv.sh + +Where <subdir> is one of the following: + + buttons: + -------- + + Uses apps/examples/buttons to exercise STM3210E-EVAL buttons and + button interrupts. + + CONFIG_STM32_CODESOURCERYW=y : CodeSourcery under Windows + + composite + --------- + + This configuration exercises a composite USB interface consisting + of a CDC/ACM device and a USB mass storage device. This configuration + uses apps/examples/composite. + + nsh and nsh2: + ------------ + Configure the NuttShell (nsh) located at examples/nsh. + + Differences between the two NSH configurations: + + =========== ======================= ================================ + nsh nsh2 + =========== ======================= ================================ + Toolchain: NuttX buildroot for Codesourcery for Windows (1) + Linux or Cygwin (1,2) + ----------- ----------------------- -------------------------------- + Loader: DfuSe DfuSe + ----------- ----------------------- -------------------------------- + Serial Debug output: USART1 Debug output: USART1 + Console: NSH output: USART1 NSH output: USART1 (3) + ----------- ----------------------- -------------------------------- + microSD Yes Yes + Support + ----------- ----------------------- -------------------------------- + FAT FS CONFIG_FAT_LCNAME=y CONFIG_FAT_LCNAME=y + Config CONFIG_FAT_LFN=n CONFIG_FAT_LFN=y (4) + ----------- ----------------------- -------------------------------- + Support for No Yes + Built-in + Apps + ----------- ----------------------- -------------------------------- + Built-in None apps/examples/nx + Apps apps/examples/nxhello + apps/examples/usbstorage (5) + =========== ======================= ================================ + + (1) You will probably need to modify nsh/setenv.sh or nsh2/setenv.sh + to set up the correct PATH variable for whichever toolchain you + may use. + (2) Since DfuSe is assumed, this configuration may only work under + Cygwin without modification. + (3) When any other device other than /dev/console is used for a user + interface, (1) linefeeds (\n) will not be expanded to carriage return + / linefeeds \r\n). You will need to configure your terminal program + to account for this. And (2) input is not automatically echoed so + you will have to turn local echo on. + (4) Microsoft holds several patents related to the design of + long file names in the FAT file system. Please refer to the + details in the top-level COPYING file. Please do not use FAT + long file name unless you are familiar with these patent issues. + (5) When built as an NSH add-on command (CONFIG_EXAMPLES_USBMSC_BUILTIN=y), + Caution should be used to assure that the SD drive is not in use when + the USB storage device is configured. Specifically, the SD driver + should be unmounted like: + + nsh> mount -t vfat /dev/mmcsd0 /mnt/sdcard # Card is mounted in NSH + ... + nsh> umount /mnd/sdcard # Unmount before connecting USB!!! + nsh> msconn # Connect the USB storage device + ... + nsh> msdis # Disconnect USB storate device + nsh> mount -t vfat /dev/mmcsd0 /mnt/sdcard # Restore the mount + + Failure to do this could result in corruption of the SD card format. + + nx: + --- + An example using the NuttX graphics system (NX). This example + focuses on general window controls, movement, mouse and keyboard + input. + + CONFIG_STM32_CODESOURCERYW=y : CodeSourcery under Windows + CONFIG_LCD_RPORTRAIT=y : 240x320 reverse portrait + + nxlines: + ------ + Another example using the NuttX graphics system (NX). This + example focuses on placing lines on the background in various + orientations. + + CONFIG_STM32_CODESOURCERYW=y : CodeSourcery under Windows + CONFIG_LCD_RPORTRAIT=y : 240x320 reverse portrait + + nxtext: + ------ + Another example using the NuttX graphics system (NX). This + example focuses on placing text on the background while pop-up + windows occur. Text should continue to update normally with + or without the popup windows present. + + CONFIG_STM32_BUILDROOT=y : NuttX buildroot under Linux or Cygwin + CONFIG_LCD_RPORTRAIT=y : 240x320 reverse portrait + + NOTE: When I tried building this example with the CodeSourcery + tools, I got a hardfault inside of its libgcc. I haven't + retested since then, but beware if you choose to change the + toolchain. + + ostest: + ------ + This configuration directory, performs a simple OS test using + examples/ostest. By default, this project assumes that you are + using the DFU bootloader. + + CONFIG_STM32_BUILDROOT=y : NuttX buildroot under Linux or Cygwin + + RIDE + ---- + This configuration builds a trivial bring-up binary. It is + useful only because it words with the RIDE7 IDE and R-Link debugger. + + CONFIG_STM32_RAISONANCE=y : Raisonance RIDE7 under Windows + + usbserial: + --------- + This configuration directory exercises the USB serial class + driver at examples/usbserial. See examples/README.txt for + more information. + + CONFIG_STM32_BUILDROOT=y : NuttX buildroot under Linux or Cygwin + + USB debug output can be enabled as by changing the following + settings in the configuration file: + + -CONFIG_DEBUG=n + -CONFIG_DEBUG_VERBOSE=n + -CONFIG_DEBUG_USB=n + +CONFIG_DEBUG=y + +CONFIG_DEBUG_VERBOSE=y + +CONFIG_DEBUG_USB=y + + -CONFIG_EXAMPLES_USBSERIAL_TRACEINIT=n + -CONFIG_EXAMPLES_USBSERIAL_TRACECLASS=n + -CONFIG_EXAMPLES_USBSERIAL_TRACETRANSFERS=n + -CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=n + -CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n + +CONFIG_EXAMPLES_USBSERIAL_TRACEINIT=y + +CONFIG_EXAMPLES_USBSERIAL_TRACECLASS=y + +CONFIG_EXAMPLES_USBSERIAL_TRACETRANSFERS=y + +CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=y + +CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=y + + By default, the usbserial example uses the Prolific PL2303 + serial/USB converter emulation. The example can be modified + to use the CDC/ACM serial class by making the following changes + to the configuration file: + + -CONFIG_PL2303=y + +CONFIG_PL2303=n + + -CONFIG_CDCACM=n + +CONFIG_CDCACM=y + + The example can also be converted to use the alternative + USB serial example at apps/examples/usbterm by changing the + following: + + -CONFIGURED_APPS += examples/usbserial + +CONFIGURED_APPS += examples/usbterm + + In either the original appconfig file (before configuring) + or in the final apps/.config file (after configuring). + + usbstorage: + ---------- + This configuration directory exercises the USB mass storage + class driver at examples/usbstorage. See examples/README.txt for + more information. + + CONFIG_STM32_BUILDROOT=y : NuttX buildroot under Linux or Cygwin + diff --git a/nuttx/configs/px4io-v1/common/Make.defs b/nuttx/configs/px4io-v1/common/Make.defs new file mode 100644 index 000000000..7f782b5b2 --- /dev/null +++ b/nuttx/configs/px4io-v1/common/Make.defs @@ -0,0 +1,175 @@ +############################################################################ +# configs/px4fmu/common/Make.defs +# +# Copyright (C) 2011 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt <gnutt@nuttx.org> +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ + +# +# Generic Make.defs for the PX4FMU +# Do not specify/use this file directly - it is included by config-specific +# Make.defs in the per-config directories. +# + +include ${TOPDIR}/tools/Config.mk + +# +# We only support building with the ARM bare-metal toolchain from +# https://launchpad.net/gcc-arm-embedded on Windows, Linux or Mac OS. +# +CONFIG_ARMV7M_TOOLCHAIN := GNU_EABI + +include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs + +CC = $(CROSSDEV)gcc +CXX = $(CROSSDEV)g++ +CPP = $(CROSSDEV)gcc -E +LD = $(CROSSDEV)ld +AR = $(CROSSDEV)ar rcs +NM = $(CROSSDEV)nm +OBJCOPY = $(CROSSDEV)objcopy +OBJDUMP = $(CROSSDEV)objdump + +MAXOPTIMIZATION = -O3 +ARCHCPUFLAGS = -mcpu=cortex-m3 \ + -mthumb \ + -march=armv7-m + +# enable precise stack overflow tracking +#INSTRUMENTATIONDEFINES = -finstrument-functions \ +# -ffixed-r10 + +# use our linker script +LDSCRIPT = ld.script + +ifeq ($(WINTOOL),y) + # Windows-native toolchains + DIRLINK = $(TOPDIR)/tools/copydir.sh + DIRUNLINK = $(TOPDIR)/tools/unlink.sh + MKDEP = $(TOPDIR)/tools/mknulldeps.sh + ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" + ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" + ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/common/$(LDSCRIPT)}" +else + ifeq ($(PX4_WINTOOL),y) + # Windows-native toolchains (MSYS) + DIRLINK = $(TOPDIR)/tools/copydir.sh + DIRUNLINK = $(TOPDIR)/tools/unlink.sh + MKDEP = $(TOPDIR)/tools/mknulldeps.sh + ARCHINCLUDES = -I. -isystem $(TOPDIR)/include + ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx + ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/common/$(LDSCRIPT) + else + # Linux/Cygwin-native toolchain + MKDEP = $(TOPDIR)/tools/mkdeps.sh + ARCHINCLUDES = -I. -isystem $(TOPDIR)/include + ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx + ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/common/$(LDSCRIPT) + endif +endif + +# tool versions +ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'} +ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1} + +# optimisation flags +ARCHOPTIMIZATION = $(MAXOPTIMIZATION) \ + -fno-strict-aliasing \ + -fno-strength-reduce \ + -fomit-frame-pointer \ + -funsafe-math-optimizations \ + -fno-builtin-printf \ + -ffunction-sections \ + -fdata-sections + +ifeq ("${CONFIG_DEBUG_SYMBOLS}","y") +ARCHOPTIMIZATION += -g +endif + +ARCHCFLAGS = -std=gnu99 +ARCHCXXFLAGS = -fno-exceptions -fno-rtti -std=gnu++0x +ARCHWARNINGS = -Wall \ + -Wextra \ + -Wdouble-promotion \ + -Wshadow \ + -Wfloat-equal \ + -Wframe-larger-than=1024 \ + -Wpointer-arith \ + -Wlogical-op \ + -Wmissing-declarations \ + -Wpacked \ + -Wno-unused-parameter +# -Wcast-qual - generates spurious noreturn attribute warnings, try again later +# -Wconversion - would be nice, but too many "risky-but-safe" conversions in the code +# -Wcast-align - would help catch bad casts in some cases, but generates too many false positives + +ARCHCWARNINGS = $(ARCHWARNINGS) \ + -Wbad-function-cast \ + -Wstrict-prototypes \ + -Wold-style-declaration \ + -Wmissing-parameter-type \ + -Wmissing-prototypes \ + -Wnested-externs \ + -Wunsuffixed-float-constants +ARCHWARNINGSXX = $(ARCHWARNINGS) +ARCHDEFINES = +ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10 + +# this seems to be the only way to add linker flags +EXTRA_LIBS += --warn-common \ + --gc-sections + +CFLAGS = $(ARCHCFLAGS) $(ARCHCWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(INSTRUMENTATIONDEFINES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe -fno-common +CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS) +CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(INSTRUMENTATIONDEFINES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe +CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS) +CPPFLAGS = $(ARCHINCLUDES) $(INSTRUMENTATIONDEFINES) $(ARCHDEFINES) $(EXTRADEFINES) +AFLAGS = $(CFLAGS) -D__ASSEMBLY__ + +NXFLATLDFLAGS1 = -r -d -warn-common +NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat.ld -no-check-sections +LDNXFLATFLAGS = -e main -s 2048 + +OBJEXT = .o +LIBEXT = .a +EXEEXT = + +# produce partially-linked $1 from files in $2 +define PRELINK + @echo "PRELINK: $1" + $(Q) $(LD) -Ur -o $1 $2 && $(OBJCOPY) --localize-hidden $1 +endef + +HOSTCC = gcc +HOSTINCLUDES = -I. +HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe +HOSTLDFLAGS = + diff --git a/nuttx/configs/px4io-v1/common/ld.script b/nuttx/configs/px4io-v1/common/ld.script new file mode 100755 index 000000000..69c2f9cb2 --- /dev/null +++ b/nuttx/configs/px4io-v1/common/ld.script @@ -0,0 +1,129 @@ +/**************************************************************************** + * configs/stm3210e-eval/nsh/ld.script + * + * Copyright (C) 2009, 2011 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <spudmonkey@racsa.co.cr> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/* The STM32F100C8 has 64Kb of FLASH beginning at address 0x0800:0000 and + * 8Kb of SRAM beginning at address 0x2000:0000. When booting from FLASH, + * FLASH memory is aliased to address 0x0000:0000 where the code expects to + * begin execution by jumping to the entry point in the 0x0800:0000 address + * range. + */ + +MEMORY +{ + flash (rx) : ORIGIN = 0x08001000, LENGTH = 60K + sram (rwx) : ORIGIN = 0x20000000, LENGTH = 8K +} + +OUTPUT_ARCH(arm) +ENTRY(__start) /* treat __start as the anchor for dead code stripping */ +EXTERN(_vectors) /* force the vectors to be included in the output */ + +/* + * Ensure that abort() is present in the final object. The exception handling + * code pulled in by libgcc.a requires it (and that code cannot be easily avoided). + */ +EXTERN(abort) + +SECTIONS +{ + .text : { + _stext = ABSOLUTE(.); + *(.vectors) + *(.text .text.*) + *(.fixup) + *(.gnu.warning) + *(.rodata .rodata.*) + *(.gnu.linkonce.t.*) + *(.glue_7) + *(.glue_7t) + *(.got) + *(.gcc_except_table) + *(.gnu.linkonce.r.*) + _etext = ABSOLUTE(.); + } > flash + + /* + * Init functions (static constructors and the like) + */ + .init_section : { + _sinit = ABSOLUTE(.); + KEEP(*(.init_array .init_array.*)) + _einit = ABSOLUTE(.); + } > flash + + .ARM.extab : { + *(.ARM.extab*) + } > flash + + __exidx_start = ABSOLUTE(.); + .ARM.exidx : { + *(.ARM.exidx*) + } > flash + __exidx_end = ABSOLUTE(.); + + _eronly = ABSOLUTE(.); + + /* The STM32F100CB has 8Kb of SRAM beginning at the following address */ + + .data : { + _sdata = ABSOLUTE(.); + *(.data .data.*) + *(.gnu.linkonce.d.*) + CONSTRUCTORS + _edata = ABSOLUTE(.); + } > sram AT > flash + + .bss : { + _sbss = ABSOLUTE(.); + *(.bss .bss.*) + *(.gnu.linkonce.b.*) + *(COMMON) + _ebss = ABSOLUTE(.); + } > sram + + /* Stabs debugging sections. */ + .stab 0 : { *(.stab) } + .stabstr 0 : { *(.stabstr) } + .stab.excl 0 : { *(.stab.excl) } + .stab.exclstr 0 : { *(.stab.exclstr) } + .stab.index 0 : { *(.stab.index) } + .stab.indexstr 0 : { *(.stab.indexstr) } + .comment 0 : { *(.comment) } + .debug_abbrev 0 : { *(.debug_abbrev) } + .debug_info 0 : { *(.debug_info) } + .debug_line 0 : { *(.debug_line) } + .debug_pubnames 0 : { *(.debug_pubnames) } + .debug_aranges 0 : { *(.debug_aranges) } +} diff --git a/nuttx/configs/px4io-v1/common/setenv.sh b/nuttx/configs/px4io-v1/common/setenv.sh new file mode 100755 index 000000000..ff9a4bf8a --- /dev/null +++ b/nuttx/configs/px4io-v1/common/setenv.sh @@ -0,0 +1,47 @@ +#!/bin/bash +# configs/stm3210e-eval/dfu/setenv.sh +# +# Copyright (C) 2009 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt <gnutt@nuttx.org> +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# + +if [ "$(basename $0)" = "setenv.sh" ] ; then + echo "You must source this script, not run it!" 1>&2 + exit 1 +fi + +if [ -z "${PATH_ORIG}" ]; then export PATH_ORIG="${PATH}"; fi + +WD=`pwd` +export RIDE_BIN="/cygdrive/c/Program Files/Raisonance/Ride/arm-gcc/bin" +export BUILDROOT_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin" +export PATH="${BUILDROOT_BIN}:${RIDE_BIN}:/sbin:/usr/sbin:${PATH_ORIG}" + +echo "PATH : ${PATH}" diff --git a/nuttx/configs/px4io-v1/include/README.txt b/nuttx/configs/px4io-v1/include/README.txt new file mode 100755 index 000000000..2264a80aa --- /dev/null +++ b/nuttx/configs/px4io-v1/include/README.txt @@ -0,0 +1 @@ +This directory contains header files unique to the PX4IO board. diff --git a/nuttx/configs/px4io-v1/include/board.h b/nuttx/configs/px4io-v1/include/board.h new file mode 100755 index 000000000..668602ea8 --- /dev/null +++ b/nuttx/configs/px4io-v1/include/board.h @@ -0,0 +1,172 @@ +/************************************************************************************ + * configs/px4io/include/board.h + * include/arch/board/board.h + * + * Copyright (C) 2009 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <gnutt@nuttx.org> + * Copyright (C) 2012 PX4 Development Team. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +#ifndef __ARCH_BOARD_BOARD_H +#define __ARCH_BOARD_BOARD_H + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +#include <nuttx/config.h> +#ifndef __ASSEMBLY__ +# include <stdint.h> +# include <stdbool.h> +#endif +#include <stm32_rcc.h> +#include <stm32_sdio.h> +#include <stm32.h> + +/************************************************************************************ + * Definitions + ************************************************************************************/ + +/* Clocking *************************************************************************/ + +/* On-board crystal frequency is 24MHz (HSE) */ + +#define STM32_BOARD_XTAL 24000000ul + +/* Use the HSE output as the system clock */ + +#define STM32_SYSCLK_SW RCC_CFGR_SW_HSE +#define STM32_SYSCLK_SWS RCC_CFGR_SWS_HSE +#define STM32_SYSCLK_FREQUENCY STM32_BOARD_XTAL + +/* AHB clock (HCLK) is SYSCLK (24MHz) */ + +#define STM32_RCC_CFGR_HPRE RCC_CFGR_HPRE_SYSCLK +#define STM32_HCLK_FREQUENCY STM32_SYSCLK_FREQUENCY +#define STM32_BOARD_HCLK STM32_HCLK_FREQUENCY /* same as above, to satisfy compiler */ + +/* APB2 clock (PCLK2) is HCLK (24MHz) */ + +#define STM32_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLK +#define STM32_PCLK2_FREQUENCY STM32_HCLK_FREQUENCY +#define STM32_APB2_CLKIN (STM32_PCLK2_FREQUENCY) /* Timers 2-4 */ + +/* APB2 timer 1 will receive PCLK2. */ + +#define STM32_APB2_TIM1_CLKIN (STM32_PCLK2_FREQUENCY) +#define STM32_APB2_TIM8_CLKIN (STM32_PCLK2_FREQUENCY) + +/* APB1 clock (PCLK1) is HCLK (24MHz) */ + +#define STM32_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLK +#define STM32_PCLK1_FREQUENCY (STM32_HCLK_FREQUENCY) + +/* All timers run off PCLK */ + +#define STM32_APB1_TIM1_CLKIN (STM32_PCLK2_FREQUENCY) +#define STM32_APB1_TIM2_CLKIN (STM32_PCLK1_FREQUENCY) +#define STM32_APB1_TIM3_CLKIN (STM32_PCLK1_FREQUENCY) +#define STM32_APB1_TIM4_CLKIN (STM32_PCLK1_FREQUENCY) + +/* + * Some of the USART pins are not available; override the GPIO + * definitions with an invalid pin configuration. + */ +#undef GPIO_USART2_CTS +#define GPIO_USART2_CTS 0xffffffff +#undef GPIO_USART2_RTS +#define GPIO_USART2_RTS 0xffffffff +#undef GPIO_USART2_CK +#define GPIO_USART2_CK 0xffffffff +#undef GPIO_USART3_TX +#define GPIO_USART3_TX 0xffffffff +#undef GPIO_USART3_CK +#define GPIO_USART3_CK 0xffffffff +#undef GPIO_USART3_CTS +#define GPIO_USART3_CTS 0xffffffff +#undef GPIO_USART3_RTS +#define GPIO_USART3_RTS 0xffffffff + +/* + * High-resolution timer + */ +#ifdef CONFIG_HRT_TIMER +# define HRT_TIMER 1 /* use timer1 for the HRT */ +# define HRT_TIMER_CHANNEL 2 /* use capture/compare channel 2 */ +#endif + +/* + * PPM + * + * PPM input is handled by the HRT timer. + * + * Pin is PA8, timer 1, channel 1 + */ +#if defined(CONFIG_HRT_TIMER) && defined (CONFIG_HRT_PPM) +# define HRT_PPM_CHANNEL 1 /* use capture/compare channel 1 */ +# define GPIO_PPM_IN GPIO_TIM1_CH1IN +#endif + +/************************************************************************************ + * Public Data + ************************************************************************************/ + +#ifndef __ASSEMBLY__ + +#undef EXTERN +#if defined(__cplusplus) +#define EXTERN extern "C" +extern "C" { +#else +#define EXTERN extern +#endif + +/************************************************************************************ + * Public Function Prototypes + ************************************************************************************/ +/************************************************************************************ + * Name: stm32_boardinitialize + * + * Description: + * All STM32 architectures must provide the following entry point. This entry point + * is called early in the intitialization -- after all memory has been configured + * and mapped but before any devices have been initialized. + * + ************************************************************************************/ + +EXTERN void stm32_boardinitialize(void); + +#if defined(__cplusplus) +} +#endif + +#endif /* __ASSEMBLY__ */ +#endif /* __ARCH_BOARD_BOARD_H */ diff --git a/nuttx/configs/px4io-v1/include/drv_i2c_device.h b/nuttx/configs/px4io-v1/include/drv_i2c_device.h new file mode 100644 index 000000000..02582bc09 --- /dev/null +++ b/nuttx/configs/px4io-v1/include/drv_i2c_device.h @@ -0,0 +1,42 @@ +/**************************************************************************** + * + * Copyright (C) 2012 PX4 Development Team. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + + /** + * @file A simple, polled I2C slave-mode driver. + * + * The master writes to and reads from a byte buffer, which the caller + * can update inbetween calls to the FSM. + */ + +extern void i2c_fsm_init(uint8_t *buffer, size_t buffer_size); +extern bool i2c_fsm(void); diff --git a/nuttx/configs/px4io-v1/io/Make.defs b/nuttx/configs/px4io-v1/io/Make.defs new file mode 100644 index 000000000..c7f6effd9 --- /dev/null +++ b/nuttx/configs/px4io-v1/io/Make.defs @@ -0,0 +1,3 @@ +include ${TOPDIR}/.config + +include $(TOPDIR)/configs/px4io-v1/common/Make.defs diff --git a/nuttx/configs/px4io-v1/io/appconfig b/nuttx/configs/px4io-v1/io/appconfig new file mode 100644 index 000000000..48a41bcdb --- /dev/null +++ b/nuttx/configs/px4io-v1/io/appconfig @@ -0,0 +1,32 @@ +############################################################################ +# +# Copyright (C) 2012 PX4 Development Team. All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name PX4 nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ diff --git a/nuttx/configs/px4io-v1/io/defconfig b/nuttx/configs/px4io-v1/io/defconfig new file mode 100755 index 000000000..43dd1b0e8 --- /dev/null +++ b/nuttx/configs/px4io-v1/io/defconfig @@ -0,0 +1,552 @@ +############################################################################ +# configs/px4io/nsh/defconfig +# +# Copyright (C) 2012 PX4 Development Team. All rights reserved. +# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt <gnutt@nuttx.org> +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ +# +# architecture selection +# +# CONFIG_ARCH - identifies the arch subdirectory and, hence, the +# processor architecture. +# CONFIG_ARCH_family - for use in C code. This identifies the +# particular chip family that the architecture is implemented +# in. +# CONFIG_ARCH_architecture - for use in C code. This identifies the +# specific architecture within the chip family. +# CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory +# CONFIG_ARCH_CHIP_name - For use in C code +# CONFIG_ARCH_BOARD - identifies the configs subdirectory and, hence, +# the board that supports the particular chip or SoC. +# CONFIG_ARCH_BOARD_name - for use in C code +# CONFIG_ENDIAN_BIG - define if big endian (default is little endian) +# CONFIG_BOARD_LOOPSPERMSEC - for delay loops +# CONFIG_DRAM_SIZE - Describes the installed DRAM. +# CONFIG_DRAM_START - The start address of DRAM (physical) +# CONFIG_ARCH_IRQPRIO - The ST32F100CB supports interrupt prioritization +# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt +# stack. If defined, this symbol is the size of the interrupt +# stack in bytes. If not defined, the user task stacks will be +# used during interrupt handling. +# CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions +# CONFIG_ARCH_BOOTLOADER - Set if you are using a bootloader. +# CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture. +# CONFIG_ARCH_BUTTONS - Enable support for buttons. Unique to board architecture. +# CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that +# cause a 100 second delay during boot-up. This 100 second delay +# serves no purpose other than it allows you to calibrate +# CONFIG_BOARD_LOOPSPERMSEC. You simply use a stop watch to measure +# the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until +# the delay actually is 100 seconds. +# CONFIG_ARCH_DMA - Support DMA initialization +# +CONFIG_ARCH="arm" +CONFIG_ARCH_ARM=y +CONFIG_ARCH_CORTEXM3=y +CONFIG_ARCH_CHIP="stm32" +CONFIG_ARCH_CHIP_STM32F100C8=y +# +# Board Selection +# +CONFIG_ARCH_BOARD_PX4IO_V1=y +# CONFIG_ARCH_BOARD_CUSTOM is not set +CONFIG_ARCH_BOARD="px4io-v1" +CONFIG_BOARD_LOOPSPERMSEC=2000 +CONFIG_DRAM_SIZE=0x00002000 +CONFIG_DRAM_START=0x20000000 +CONFIG_ARCH_IRQPRIO=y +CONFIG_ARCH_INTERRUPTSTACK=n +CONFIG_ARCH_STACKDUMP=y +CONFIG_ARCH_BOOTLOADER=n +CONFIG_ARCH_LEDS=n +CONFIG_ARCH_BUTTONS=n +CONFIG_ARCH_CALIBRATION=n +CONFIG_ARCH_DMA=y +CONFIG_ARCH_MATH_H=y + +CONFIG_ARMV7M_CMNVECTOR=y + +# +# JTAG Enable settings (by default JTAG-DP and SW-DP are disabled): +# +# CONFIG_STM32_DFU - Use the DFU bootloader, not JTAG +# +# JTAG Enable options: +# +# CONFIG_STM32_JTAG_FULL_ENABLE - Enables full SWJ (JTAG-DP + SW-DP) +# CONFIG_STM32_JTAG_NOJNTRST_ENABLE - Enables full SWJ (JTAG-DP + SW-DP) +# but without JNTRST. +# CONFIG_STM32_JTAG_SW_ENABLE - Set JTAG-DP disabled and SW-DP enabled +# +CONFIG_STM32_DFU=n +CONFIG_STM32_JTAG_FULL_ENABLE=y +CONFIG_STM32_JTAG_NOJNTRST_ENABLE=n +CONFIG_STM32_JTAG_SW_ENABLE=n + +# +# Individual subsystems can be enabled: +# +# AHB: +CONFIG_STM32_DMA1=y +CONFIG_STM32_DMA2=n +CONFIG_STM32_CRC=n +# APB1: +# Timers 2,3 and 4 are owned by the PWM driver +CONFIG_STM32_TIM2=n +CONFIG_STM32_TIM3=n +CONFIG_STM32_TIM4=n +CONFIG_STM32_TIM5=n +CONFIG_STM32_TIM6=n +CONFIG_STM32_TIM7=n +CONFIG_STM32_WWDG=n +CONFIG_STM32_SPI2=n +CONFIG_STM32_USART2=y +CONFIG_STM32_USART3=y +CONFIG_STM32_I2C1=y +CONFIG_STM32_I2C2=n +CONFIG_STM32_BKP=n +CONFIG_STM32_PWR=n +CONFIG_STM32_DAC=n +# APB2: +# We use our own ADC driver, but leave this on for clocking purposes. +CONFIG_STM32_ADC1=y +CONFIG_STM32_ADC2=n +# TIM1 is owned by the HRT +CONFIG_STM32_TIM1=n +CONFIG_STM32_SPI1=n +CONFIG_STM32_TIM8=n +CONFIG_STM32_USART1=y +CONFIG_STM32_ADC3=n + + +# +# STM32F100 specific serial device driver settings +# +# CONFIG_USARTn_SERIAL_CONSOLE - selects the USARTn for the +# console and ttys0 (default is the USART1). +# CONFIG_USARTn_RXBUFSIZE - Characters are buffered as received. +# This specific the size of the receive buffer +# CONFIG_USARTn_TXBUFSIZE - Characters are buffered before +# being sent. This specific the size of the transmit buffer +# CONFIG_USARTn_BAUD - The configure BAUD of the UART. Must be +# CONFIG_USARTn_BITS - The number of bits. Must be either 7 or 8. +# CONFIG_USARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity +# CONFIG_USARTn_2STOP - Two stop bits +# +CONFIG_SERIAL_TERMIOS=y +CONFIG_STANDARD_SERIAL=y + +CONFIG_USART1_SERIAL_CONSOLE=y +CONFIG_USART2_SERIAL_CONSOLE=n +CONFIG_USART3_SERIAL_CONSOLE=n + +CONFIG_USART1_TXBUFSIZE=64 +CONFIG_USART2_TXBUFSIZE=64 +CONFIG_USART3_TXBUFSIZE=64 + +CONFIG_USART1_RXBUFSIZE=64 +CONFIG_USART2_RXBUFSIZE=64 +CONFIG_USART3_RXBUFSIZE=64 + +CONFIG_USART1_BAUD=115200 +CONFIG_USART2_BAUD=115200 +CONFIG_USART3_BAUD=115200 + +CONFIG_USART1_BITS=8 +CONFIG_USART2_BITS=8 +CONFIG_USART3_BITS=8 + +CONFIG_USART1_PARITY=0 +CONFIG_USART2_PARITY=0 +CONFIG_USART3_PARITY=0 + +CONFIG_USART1_2STOP=0 +CONFIG_USART2_2STOP=0 +CONFIG_USART3_2STOP=0 + +CONFIG_USART1_RXDMA=y +SERIAL_HAVE_CONSOLE_DMA=y +# Conflicts with I2C1 DMA +CONFIG_USART2_RXDMA=n +CONFIG_USART3_RXDMA=y + +# +# PX4IO specific driver settings +# +# CONFIG_HRT_TIMER +# Enables the high-resolution timer. The board definition must +# set HRT_TIMER and HRT_TIMER_CHANNEL to the timer and capture/ +# compare channels to be used. +# CONFIG_HRT_PPM +# Enables R/C PPM input using the HRT. The board definition must +# set HRT_PPM_CHANNEL to the timer capture/compare channel to be +# used, and define GPIO_PPM_IN to configure the appropriate timer +# GPIO. +# CONFIG_PWM_SERVO +# Enables the PWM servo driver. The driver configuration must be +# supplied by the board support at initialisation time. +# Note that USART2 must be disabled on the PX4 board for this to +# be available. +# +# +CONFIG_HRT_TIMER=y +CONFIG_HRT_PPM=y + +# +# General build options +# +# CONFIG_RRLOAD_BINARY - make the rrload binary format used with +# BSPs from www.ridgerun.com using the tools/mkimage.sh script +# CONFIG_INTELHEX_BINARY - make the Intel HEX binary format +# used with many different loaders using the GNU objcopy program +# Should not be selected if you are not using the GNU toolchain. +# CONFIG_MOTOROLA_SREC - make the Motorola S-Record binary format +# used with many different loaders using the GNU objcopy program +# Should not be selected if you are not using the GNU toolchain. +# CONFIG_RAW_BINARY - make a raw binary format file used with many +# different loaders using the GNU objcopy program. This option +# should not be selected if you are not using the GNU toolchain. +# CONFIG_HAVE_LIBM - toolchain supports libm.a +# +CONFIG_RRLOAD_BINARY=n +CONFIG_INTELHEX_BINARY=n +CONFIG_MOTOROLA_SREC=n +CONFIG_RAW_BINARY=y +CONFIG_HAVE_LIBM=n + +# +# General OS setup +# +# CONFIG_APPS_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. Default: ../apps +# CONFIG_DEBUG - enables built-in debug options +# CONFIG_DEBUG_VERBOSE - enables verbose debug output +# CONFIG_DEBUG_SYMBOLS - build without optimization and with +# debug symbols (needed for use with a debugger). +# CONFIG_HAVE_CXX - Enable support for C++ +# CONFIG_HAVE_CXXINITIALIZE - The platform-specific logic includes support +# for initialization of static C++ instances for this architecture +# and for the selected toolchain (via up_cxxinitialize()). +# CONFIG_MM_REGIONS - If the architecture includes multiple +# regions of memory to allocate from, this specifies the +# number of memory regions that the memory manager must +# handle and enables the API mm_addregion(start, end); +# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot +# time console output +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to +# inform NuttX that the processor hardware is providing +# system timer interrupts at some interrupt interval other +# than 10 msec. +# CONFIG_RR_INTERVAL - The round robin timeslice will be set +# this number of milliseconds; Round robin scheduling can +# be disabled by setting this value to zero. +# CONFIG_SCHED_INSTRUMENTATION - enables instrumentation in +# scheduler to monitor system performance +# CONFIG_TASK_NAME_SIZE - Spcifies that maximum size of a +# task name to save in the TCB. Useful if scheduler +# instrumentation is selected. Set to zero to disable. +# CONFIG_START_YEAR, CONFIG_START_MONTH, CONFIG_START_DAY - +# Used to initialize the internal time logic. +# CONFIG_GREGORIAN_TIME - Enables Gregorian time conversions. +# You would only need this if you are concerned about accurate +# time conversions in the past or in the distant future. +# CONFIG_JULIAN_TIME - Enables Julian time conversions. You +# would only need this if you are concerned about accurate +# time conversion in the distand past. You must also define +# CONFIG_GREGORIAN_TIME in order to use Julian time. +# CONFIG_DEV_CONSOLE - Set if architecture-specific logic +# provides /dev/console. Enables stdout, stderr, stdin. +# CONFIG_DEV_LOWCONSOLE - Use the simple, low-level serial console +# driver (minimul support) +# CONFIG_MUTEX_TYPES: Set to enable support for recursive and +# errorcheck mutexes. Enables pthread_mutexattr_settype(). +# CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority +# inheritance on mutexes and semaphores. +# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority +# inheritance is enabled. It defines the maximum number of +# different threads (minus one) that can take counts on a +# semaphore with priority inheritance support. This may be +# set to zero if priority inheritance is disabled OR if you +# are only using semaphores as mutexes (only one holder) OR +# if no more than two threads participate using a counting +# semaphore. +# CONFIG_SEM_NNESTPRIO. If priority inheritance is enabled, +# then this setting is the maximum number of higher priority +# threads (minus 1) than can be waiting for another thread +# to release a count on a semaphore. This value may be set +# to zero if no more than one thread is expected to wait for +# a semaphore. +# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors +# by task_create() when a new task is started. If set, all +# files/drivers will appear to be closed in the new task. +# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first +# three file descriptors (stdin, stdout, stderr) by task_create() +# when a new task is started. If set, all files/drivers will +# appear to be closed in the new task except for stdin, stdout, +# and stderr. +# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket +# desciptors by task_create() when a new task is started. If +# set, all sockets will appear to be closed in the new task. +# CONFIG_SCHED_WORKQUEUE. Create a dedicated "worker" thread to +# handle delayed processing from interrupt handlers. This feature +# is required for some drivers but, if there are not complaints, +# can be safely disabled. The worker thread also performs +# garbage collection -- completing any delayed memory deallocations +# from interrupt handlers. If the worker thread is disabled, +# then that clean will be performed by the IDLE thread instead +# (which runs at the lowest of priority and may not be appropriate +# if memory reclamation is of high priority). If CONFIG_SCHED_WORKQUEUE +# is enabled, then the following options can also be used: +# CONFIG_SCHED_WORKPRIORITY - The execution priority of the worker +# thread. Default: 50 +# CONFIG_SCHED_WORKPERIOD - How often the worker thread checks for +# work in units of microseconds. Default: 50*1000 (50 MS). +# CONFIG_SCHED_WORKSTACKSIZE - The stack size allocated for the worker +# thread. Default: CONFIG_IDLETHREAD_STACKSIZE. +# CONFIG_SIG_SIGWORK - The signal number that will be used to wake-up +# the worker thread. Default: 4 +# CONFIG_SCHED_WAITPID - Enable the waitpid() API +# CONFIG_SCHED_ATEXIT - Enabled the atexit() API +# +CONFIG_USER_ENTRYPOINT="user_start" +#CONFIG_APPS_DIR= +CONFIG_DEBUG=n +CONFIG_DEBUG_VERBOSE=n +CONFIG_DEBUG_SYMBOLS=y +CONFIG_DEBUG_FS=n +CONFIG_DEBUG_GRAPHICS=n +CONFIG_DEBUG_LCD=n +CONFIG_DEBUG_USB=n +CONFIG_DEBUG_NET=n +CONFIG_DEBUG_RTC=n +CONFIG_DEBUG_ANALOG=n +CONFIG_DEBUG_PWM=n +CONFIG_DEBUG_CAN=n +CONFIG_DEBUG_I2C=n +CONFIG_DEBUG_INPUT=n + +CONFIG_MSEC_PER_TICK=1 +CONFIG_HAVE_CXX=y +CONFIG_HAVE_CXXINITIALIZE=y +CONFIG_MM_REGIONS=1 +CONFIG_MM_SMALL=y +CONFIG_ARCH_LOWPUTC=y +CONFIG_RR_INTERVAL=0 +CONFIG_SCHED_INSTRUMENTATION=n +CONFIG_TASK_NAME_SIZE=8 +CONFIG_START_YEAR=1970 +CONFIG_START_MONTH=1 +CONFIG_START_DAY=1 +CONFIG_GREGORIAN_TIME=n +CONFIG_JULIAN_TIME=n +# this eats ~1KiB of RAM ... work out why +CONFIG_DEV_CONSOLE=y +CONFIG_DEV_LOWCONSOLE=n +CONFIG_MUTEX_TYPES=n +CONFIG_PRIORITY_INHERITANCE=n +CONFIG_SEM_PREALLOCHOLDERS=0 +CONFIG_SEM_NNESTPRIO=0 +CONFIG_FDCLONE_DISABLE=y +CONFIG_FDCLONE_STDIO=y +CONFIG_SDCLONE_DISABLE=y +CONFIG_SCHED_WORKQUEUE=n +CONFIG_SCHED_WORKPRIORITY=50 +CONFIG_SCHED_WORKPERIOD=50000 +CONFIG_SCHED_WORKSTACKSIZE=1024 +CONFIG_SIG_SIGWORK=4 +CONFIG_SCHED_WAITPID=n +CONFIG_SCHED_ATEXIT=n + +# +# The following can be used to disable categories of +# APIs supported by the OS. If the compiler supports +# weak functions, then it should not be necessary to +# disable functions unless you want to restrict usage +# of those APIs. +# +# There are certain dependency relationships in these +# features. +# +# o mq_notify logic depends on signals to awaken tasks +# waiting for queues to become full or empty. +# o pthread_condtimedwait() depends on signals to wake +# up waiting tasks. +# +CONFIG_DISABLE_CLOCK=n +CONFIG_DISABLE_POSIX_TIMERS=y +CONFIG_DISABLE_PTHREAD=y +CONFIG_DISABLE_SIGNALS=y +CONFIG_DISABLE_MQUEUE=y +CONFIG_DISABLE_MOUNTPOINT=y +CONFIG_DISABLE_ENVIRON=y +CONFIG_DISABLE_POLL=y + +# +# Misc libc settings +# +# CONFIG_NOPRINTF_FIELDWIDTH - sprintf-related logic is a +# little smaller if we do not support fieldwidthes +# +CONFIG_NOPRINTF_FIELDWIDTH=n + +# +# Allow for architecture optimized implementations +# +# The architecture can provide optimized versions of the +# following to improve system performance +# +CONFIG_ARCH_MEMCPY=n +CONFIG_ARCH_MEMCMP=n +CONFIG_ARCH_MEMMOVE=n +CONFIG_ARCH_MEMSET=n +CONFIG_ARCH_STRCMP=n +CONFIG_ARCH_STRCPY=n +CONFIG_ARCH_STRNCPY=n +CONFIG_ARCH_STRLEN=n +CONFIG_ARCH_STRNLEN=n +CONFIG_ARCH_BZERO=n + +# +# Sizes of configurable things (0 disables) +# +# CONFIG_MAX_TASKS - The maximum number of simultaneously +# active tasks. This value must be a power of two. +# CONFIG_MAX_TASK_ARGS - This controls the maximum number of +# of parameters that a task may receive (i.e., maxmum value +# of 'argc') +# CONFIG_NPTHREAD_KEYS - The number of items of thread- +# specific data that can be retained +# CONFIG_NFILE_DESCRIPTORS - The maximum number of file +# descriptors (one for each open) +# CONFIG_NFILE_STREAMS - The maximum number of streams that +# can be fopen'ed +# CONFIG_NAME_MAX - The maximum size of a file name. +# CONFIG_STDIO_BUFFER_SIZE - Size of the buffer to allocate +# on fopen. (Only if CONFIG_NFILE_STREAMS > 0) +# CONFIG_STDIO_LINEBUFFER - If standard C buffered I/O is enabled +# (CONFIG_STDIO_BUFFER_SIZE > 0), then this option may be added +# to force automatic, line-oriented flushing the output buffer +# for putc(), fputc(), putchar(), puts(), fputs(), printf(), +# fprintf(), and vfprintf(). When a newline is encountered in +# the output string, the output buffer will be flushed. This +# (slightly) increases the NuttX footprint but supports the kind +# of behavior that people expect for printf(). +# CONFIG_NUNGET_CHARS - Number of characters that can be +# buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0) +# CONFIG_PREALLOC_MQ_MSGS - The number of pre-allocated message +# structures. The system manages a pool of preallocated +# message structures to minimize dynamic allocations +# CONFIG_MQ_MAXMSGSIZE - Message structures are allocated with +# a fixed payload size given by this settin (does not include +# other message structure overhead. +# CONFIG_MAX_WDOGPARMS - Maximum number of parameters that +# can be passed to a watchdog handler +# CONFIG_PREALLOC_WDOGS - The number of pre-allocated watchdog +# structures. The system manages a pool of preallocated +# watchdog structures to minimize dynamic allocations +# CONFIG_PREALLOC_TIMERS - The number of pre-allocated POSIX +# timer structures. The system manages a pool of preallocated +# timer structures to minimize dynamic allocations. Set to +# zero for all dynamic allocations. +# +CONFIG_MAX_TASKS=4 +CONFIG_MAX_TASK_ARGS=4 +CONFIG_NPTHREAD_KEYS=2 +CONFIG_NFILE_DESCRIPTORS=8 +CONFIG_NFILE_STREAMS=0 +CONFIG_NAME_MAX=12 +CONFIG_STDIO_BUFFER_SIZE=32 +CONFIG_STDIO_LINEBUFFER=n +CONFIG_NUNGET_CHARS=2 +CONFIG_PREALLOC_MQ_MSGS=4 +CONFIG_MQ_MAXMSGSIZE=32 +CONFIG_MAX_WDOGPARMS=2 +CONFIG_PREALLOC_WDOGS=4 +CONFIG_PREALLOC_TIMERS=0 + + +# +# Settings for apps/nshlib +# +# CONFIG_NSH_BUILTIN_APPS - Support external registered, +# "named" applications that can be executed from the NSH +# command line (see apps/README.txt for more information). +# CONFIG_NSH_FILEIOSIZE - Size of a static I/O buffer +# CONFIG_NSH_STRERROR - Use strerror(errno) +# CONFIG_NSH_LINELEN - Maximum length of one command line +# CONFIG_NSH_NESTDEPTH - Max number of nested if-then[-else]-fi +# CONFIG_NSH_DISABLESCRIPT - Disable scripting support +# CONFIG_NSH_DISABLEBG - Disable background commands +# CONFIG_NSH_ROMFSETC - Use startup script in /etc +# CONFIG_NSH_CONSOLE - Use serial console front end +# CONFIG_NSH_TELNET - Use telnetd console front end +# CONFIG_NSH_ARCHINIT - Platform provides architecture +# specific initialization (nsh_archinitialize()). +# + +# Disable NSH completely +CONFIG_NSH_CONSOLE=n + +# +# Stack and heap information +# +# CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP +# operation from FLASH but must copy initialized .data sections to RAM. +# (should also be =n for the STM3210E-EVAL which always runs from flash) +# CONFIG_BOOT_COPYTORAM - Some configurations boot in FLASH +# but copy themselves entirely into RAM for better performance. +# CONFIG_CUSTOM_STACK - The up_ implementation will handle +# all stack operations outside of the nuttx model. +# CONFIG_STACK_POINTER - The initial stack pointer (arm7tdmi only) +# CONFIG_IDLETHREAD_STACKSIZE - The size of the initial stack. +# This is the thread that (1) performs the inital boot of the system up +# to the point where user_start() is spawned, and (2) there after is the +# IDLE thread that executes only when there is no other thread ready to +# run. +# CONFIG_USERMAIN_STACKSIZE - The size of the stack to allocate +# for the main user thread that begins at the user_start() entry point. +# CONFIG_PTHREAD_STACK_MIN - Minimum pthread stack size +# CONFIG_PTHREAD_STACK_DEFAULT - Default pthread stack size +# CONFIG_HEAP_BASE - The beginning of the heap +# CONFIG_HEAP_SIZE - The size of the heap +# +CONFIG_BOOT_RUNFROMFLASH=n +CONFIG_BOOT_COPYTORAM=n +CONFIG_CUSTOM_STACK=n +CONFIG_STACK_POINTER= +CONFIG_IDLETHREAD_STACKSIZE=1024 +CONFIG_USERMAIN_STACKSIZE=1200 +CONFIG_PTHREAD_STACK_MIN=512 +CONFIG_PTHREAD_STACK_DEFAULT=1024 +CONFIG_HEAP_BASE= +CONFIG_HEAP_SIZE= diff --git a/nuttx/configs/px4io-v1/io/setenv.sh b/nuttx/configs/px4io-v1/io/setenv.sh new file mode 100755 index 000000000..ff9a4bf8a --- /dev/null +++ b/nuttx/configs/px4io-v1/io/setenv.sh @@ -0,0 +1,47 @@ +#!/bin/bash +# configs/stm3210e-eval/dfu/setenv.sh +# +# Copyright (C) 2009 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt <gnutt@nuttx.org> +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# + +if [ "$(basename $0)" = "setenv.sh" ] ; then + echo "You must source this script, not run it!" 1>&2 + exit 1 +fi + +if [ -z "${PATH_ORIG}" ]; then export PATH_ORIG="${PATH}"; fi + +WD=`pwd` +export RIDE_BIN="/cygdrive/c/Program Files/Raisonance/Ride/arm-gcc/bin" +export BUILDROOT_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin" +export PATH="${BUILDROOT_BIN}:${RIDE_BIN}:/sbin:/usr/sbin:${PATH_ORIG}" + +echo "PATH : ${PATH}" diff --git a/nuttx/configs/px4io-v1/nsh/Make.defs b/nuttx/configs/px4io-v1/nsh/Make.defs new file mode 100644 index 000000000..87508e22e --- /dev/null +++ b/nuttx/configs/px4io-v1/nsh/Make.defs @@ -0,0 +1,3 @@ +include ${TOPDIR}/.config + +include $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/common/Make.defs diff --git a/nuttx/configs/px4io-v1/nsh/appconfig b/nuttx/configs/px4io-v1/nsh/appconfig new file mode 100644 index 000000000..d5809a939 --- /dev/null +++ b/nuttx/configs/px4io-v1/nsh/appconfig @@ -0,0 +1,43 @@ +############################################################################ +# configs/stm3210e-eval/nsh/appconfig +# +# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt <gnutt@nuttx.org> +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ + +# Path to example in apps/examples containing the user_start entry point + +CONFIGURED_APPS += examples/nsh + +CONFIGURED_APPS += system/readline +CONFIGURED_APPS += nshlib +CONFIGURED_APPS += reboot + diff --git a/nuttx/configs/px4io-v1/nsh/defconfig b/nuttx/configs/px4io-v1/nsh/defconfig new file mode 100755 index 000000000..6f4e20869 --- /dev/null +++ b/nuttx/configs/px4io-v1/nsh/defconfig @@ -0,0 +1,565 @@ +############################################################################ +# configs/px4io/nsh/defconfig +# +# Copyright (C) 2009-2012 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt <gnutt@nuttx.org> +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ +# +# architecture selection +# +# CONFIG_ARCH - identifies the arch subdirectory and, hence, the +# processor architecture. +# CONFIG_ARCH_family - for use in C code. This identifies the +# particular chip family that the architecture is implemented +# in. +# CONFIG_ARCH_architecture - for use in C code. This identifies the +# specific architecture within the chip familyl. +# CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory +# CONFIG_ARCH_CHIP_name - For use in C code +# CONFIG_ARCH_BOARD - identifies the configs subdirectory and, hence, +# the board that supports the particular chip or SoC. +# CONFIG_ARCH_BOARD_name - for use in C code +# CONFIG_ENDIAN_BIG - define if big endian (default is little endian) +# CONFIG_BOARD_LOOPSPERMSEC - for delay loops +# CONFIG_DRAM_SIZE - Describes the installed DRAM. +# CONFIG_DRAM_START - The start address of DRAM (physical) +# CONFIG_DRAM_END - Last address+1 of installed RAM +# CONFIG_ARCH_IRQPRIO - The ST32F100CB supports interrupt prioritization +# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt +# stack. If defined, this symbol is the size of the interrupt +# stack in bytes. If not defined, the user task stacks will be +# used during interrupt handling. +# CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions +# CONFIG_ARCH_BOOTLOADER - Set if you are using a bootloader. +# CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture. +# CONFIG_ARCH_BUTTONS - Enable support for buttons. Unique to board architecture. +# CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that +# cause a 100 second delay during boot-up. This 100 second delay +# serves no purpose other than it allows you to calibrate +# CONFIG_BOARD_LOOPSPERMSEC. You simply use a stop watch to measure +# the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until +# the delay actually is 100 seconds. +# CONFIG_ARCH_DMA - Support DMA initialization +# +CONFIG_ARCH=arm +CONFIG_ARCH_ARM=y +CONFIG_ARCH_CORTEXM3=y +CONFIG_ARCH_CHIP=stm32 +CONFIG_ARCH_CHIP_STM32F100C8=y +CONFIG_ARCH_BOARD=px4io +CONFIG_ARCH_BOARD_PX4IO=y +CONFIG_BOARD_LOOPSPERMSEC=24000 +CONFIG_DRAM_SIZE=0x00002000 +CONFIG_DRAM_START=0x20000000 +CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) +CONFIG_ARCH_IRQPRIO=y +CONFIG_ARCH_INTERRUPTSTACK=n +CONFIG_ARCH_STACKDUMP=y +CONFIG_ARCH_BOOTLOADER=n +CONFIG_ARCH_LEDS=y +CONFIG_ARCH_BUTTONS=y +CONFIG_ARCH_CALIBRATION=n +CONFIG_ARCH_DMA=n +CONFIG_ARMV7M_CMNVECTOR=y + +# +# JTAG Enable settings (by default JTAG-DP and SW-DP are disabled): +# +# CONFIG_STM32_DFU - Use the DFU bootloader, not JTAG +# +# JTAG Enable options: +# +# CONFIG_STM32_JTAG_FULL_ENABLE - Enables full SWJ (JTAG-DP + SW-DP) +# CONFIG_STM32_JTAG_NOJNTRST_ENABLE - Enables full SWJ (JTAG-DP + SW-DP) +# but without JNTRST. +# CONFIG_STM32_JTAG_SW_ENABLE - Set JTAG-DP disabled and SW-DP enabled +# +CONFIG_STM32_DFU=n +CONFIG_STM32_JTAG_FULL_ENABLE=y +CONFIG_STM32_JTAG_NOJNTRST_ENABLE=n +CONFIG_STM32_JTAG_SW_ENABLE=n + +# +# Individual subsystems can be enabled: +# AHB: +CONFIG_STM32_DMA1=n +CONFIG_STM32_DMA2=n +CONFIG_STM32_CRC=n +# APB1: +# Timers 2,3 and 4 are owned by the PWM driver +CONFIG_STM32_TIM2=n +CONFIG_STM32_TIM3=n +CONFIG_STM32_TIM4=n +CONFIG_STM32_TIM5=n +CONFIG_STM32_TIM6=n +CONFIG_STM32_TIM7=n +CONFIG_STM32_WWDG=n +CONFIG_STM32_SPI2=n +CONFIG_STM32_USART2=y +CONFIG_STM32_USART3=y +CONFIG_STM32_I2C1=y +CONFIG_STM32_I2C2=n +CONFIG_STM32_BKP=n +CONFIG_STM32_PWR=n +CONFIG_STM32_DAC=n +# APB2: +CONFIG_STM32_ADC1=y +CONFIG_STM32_ADC2=n +# TIM1 is owned by the HRT +CONFIG_STM32_TIM1=n +CONFIG_STM32_SPI1=n +CONFIG_STM32_TIM8=n +CONFIG_STM32_USART1=y +CONFIG_STM32_ADC3=n + +# +# Timer and I2C devices may need to the following to force power to be applied: +# +#CONFIG_STM32_FORCEPOWER=y + +# +# STM32F100 specific serial device driver settings +# +# CONFIG_USARTn_SERIAL_CONSOLE - selects the USARTn for the +# console and ttys0 (default is the USART1). +# CONFIG_USARTn_RXBUFSIZE - Characters are buffered as received. +# This specific the size of the receive buffer +# CONFIG_USARTn_TXBUFSIZE - Characters are buffered before +# being sent. This specific the size of the transmit buffer +# CONFIG_USARTn_BAUD - The configure BAUD of the UART. Must be +# CONFIG_USARTn_BITS - The number of bits. Must be either 7 or 8. +# CONFIG_USARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity +# CONFIG_USARTn_2STOP - Two stop bits +# +CONFIG_USART1_SERIAL_CONSOLE=y +CONFIG_USART2_SERIAL_CONSOLE=n +CONFIG_USART3_SERIAL_CONSOLE=n + +CONFIG_USART1_TXBUFSIZE=64 +CONFIG_USART2_TXBUFSIZE=64 +CONFIG_USART3_TXBUFSIZE=64 + +CONFIG_USART1_RXBUFSIZE=64 +CONFIG_USART2_RXBUFSIZE=64 +CONFIG_USART3_RXBUFSIZE=64 + +CONFIG_USART1_BAUD=57600 +CONFIG_USART2_BAUD=115200 +CONFIG_USART3_BAUD=115200 + +CONFIG_USART1_BITS=8 +CONFIG_USART2_BITS=8 +CONFIG_USART3_BITS=8 + +CONFIG_USART1_PARITY=0 +CONFIG_USART2_PARITY=0 +CONFIG_USART3_PARITY=0 + +CONFIG_USART1_2STOP=0 +CONFIG_USART2_2STOP=0 +CONFIG_USART3_2STOP=0 + +# +# PX4IO specific driver settings +# +# CONFIG_HRT_TIMER +# Enables the high-resolution timer. The board definition must +# set HRT_TIMER and HRT_TIMER_CHANNEL to the timer and capture/ +# compare channels to be used. +# CONFIG_HRT_PPM +# Enables R/C PPM input using the HRT. The board definition must +# set HRT_PPM_CHANNEL to the timer capture/compare channel to be +# used, and define GPIO_PPM_IN to configure the appropriate timer +# GPIO. +# CONFIG_PWM_SERVO +# Enables the PWM servo driver. The driver configuration must be +# supplied by the board support at initialisation time. +# Note that USART2 must be disabled on the PX4 board for this to +# be available. +# +# +CONFIG_HRT_TIMER=y +CONFIG_HRT_PPM=y +CONFIG_PWM_SERVO=y + +# +# General build options +# +# CONFIG_RRLOAD_BINARY - make the rrload binary format used with +# BSPs from www.ridgerun.com using the tools/mkimage.sh script +# CONFIG_INTELHEX_BINARY - make the Intel HEX binary format +# used with many different loaders using the GNU objcopy program +# Should not be selected if you are not using the GNU toolchain. +# CONFIG_MOTOROLA_SREC - make the Motorola S-Record binary format +# used with many different loaders using the GNU objcopy program +# Should not be selected if you are not using the GNU toolchain. +# CONFIG_RAW_BINARY - make a raw binary format file used with many +# different loaders using the GNU objcopy program. This option +# should not be selected if you are not using the GNU toolchain. +# CONFIG_HAVE_LIBM - toolchain supports libm.a +# +CONFIG_RRLOAD_BINARY=n +CONFIG_INTELHEX_BINARY=n +CONFIG_MOTOROLA_SREC=n +CONFIG_RAW_BINARY=y +CONFIG_HAVE_LIBM=n + +# +# General OS setup +# +# CONFIG_APPS_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. Default: ../apps +# CONFIG_DEBUG - enables built-in debug options +# CONFIG_DEBUG_VERBOSE - enables verbose debug output +# CONFIG_DEBUG_SYMBOLS - build without optimization and with +# debug symbols (needed for use with a debugger). +# CONFIG_HAVE_CXX - Enable support for C++ +# CONFIG_HAVE_CXXINITIALIZE - The platform-specific logic includes support +# for initialization of static C++ instances for this architecture +# and for the selected toolchain (via up_cxxinitialize()). +# CONFIG_MM_REGIONS - If the architecture includes multiple +# regions of memory to allocate from, this specifies the +# number of memory regions that the memory manager must +# handle and enables the API mm_addregion(start, end); +# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot +# time console output +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to +# inform NuttX that the processor hardware is providing +# system timer interrupts at some interrupt interval other +# than 10 msec. +# CONFIG_RR_INTERVAL - The round robin timeslice will be set +# this number of milliseconds; Round robin scheduling can +# be disabled by setting this value to zero. +# CONFIG_SCHED_INSTRUMENTATION - enables instrumentation in +# scheduler to monitor system performance +# CONFIG_TASK_NAME_SIZE - Spcifies that maximum size of a +# task name to save in the TCB. Useful if scheduler +# instrumentation is selected. Set to zero to disable. +# CONFIG_START_YEAR, CONFIG_START_MONTH, CONFIG_START_DAY - +# Used to initialize the internal time logic. +# CONFIG_GREGORIAN_TIME - Enables Gregorian time conversions. +# You would only need this if you are concerned about accurate +# time conversions in the past or in the distant future. +# CONFIG_JULIAN_TIME - Enables Julian time conversions. You +# would only need this if you are concerned about accurate +# time conversion in the distand past. You must also define +# CONFIG_GREGORIAN_TIME in order to use Julian time. +# CONFIG_DEV_CONSOLE - Set if architecture-specific logic +# provides /dev/console. Enables stdout, stderr, stdin. +# CONFIG_DEV_LOWCONSOLE - Use the simple, low-level serial console +# driver (minimul support) +# CONFIG_MUTEX_TYPES: Set to enable support for recursive and +# errorcheck mutexes. Enables pthread_mutexattr_settype(). +# CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority +# inheritance on mutexes and semaphores. +# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority +# inheritance is enabled. It defines the maximum number of +# different threads (minus one) that can take counts on a +# semaphore with priority inheritance support. This may be +# set to zero if priority inheritance is disabled OR if you +# are only using semaphores as mutexes (only one holder) OR +# if no more than two threads participate using a counting +# semaphore. +# CONFIG_SEM_NNESTPRIO. If priority inheritance is enabled, +# then this setting is the maximum number of higher priority +# threads (minus 1) than can be waiting for another thread +# to release a count on a semaphore. This value may be set +# to zero if no more than one thread is expected to wait for +# a semaphore. +# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors +# by task_create() when a new task is started. If set, all +# files/drivers will appear to be closed in the new task. +# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first +# three file descriptors (stdin, stdout, stderr) by task_create() +# when a new task is started. If set, all files/drivers will +# appear to be closed in the new task except for stdin, stdout, +# and stderr. +# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket +# desciptors by task_create() when a new task is started. If +# set, all sockets will appear to be closed in the new task. +# CONFIG_NXFLAT. Enable support for the NXFLAT binary format. +# This format will support execution of NuttX binaries located +# in a ROMFS filesystem (see examples/nxflat). +# CONFIG_SCHED_WORKQUEUE. Create a dedicated "worker" thread to +# handle delayed processing from interrupt handlers. This feature +# is required for some drivers but, if there are not complaints, +# can be safely disabled. The worker thread also performs +# garbage collection -- completing any delayed memory deallocations +# from interrupt handlers. If the worker thread is disabled, +# then that clean will be performed by the IDLE thread instead +# (which runs at the lowest of priority and may not be appropriate +# if memory reclamation is of high priority). If CONFIG_SCHED_WORKQUEUE +# is enabled, then the following options can also be used: +# CONFIG_SCHED_WORKPRIORITY - The execution priority of the worker +# thread. Default: 50 +# CONFIG_SCHED_WORKPERIOD - How often the worker thread checks for +# work in units of microseconds. Default: 50*1000 (50 MS). +# CONFIG_SCHED_WORKSTACKSIZE - The stack size allocated for the worker +# thread. Default: CONFIG_IDLETHREAD_STACKSIZE. +# CONFIG_SIG_SIGWORK - The signal number that will be used to wake-up +# the worker thread. Default: 4 +# +#CONFIG_APPS_DIR= +CONFIG_DEBUG=n +CONFIG_DEBUG_VERBOSE=n +CONFIG_DEBUG_SYMBOLS=y +CONFIG_HAVE_CXX=n +CONFIG_HAVE_CXXINITIALIZE=n +CONFIG_MM_REGIONS=1 +CONFIG_MM_SMALL=y +CONFIG_ARCH_LOWPUTC=y +CONFIG_RR_INTERVAL=200 +CONFIG_SCHED_INSTRUMENTATION=n +CONFIG_TASK_NAME_SIZE=0 +CONFIG_START_YEAR=2009 +CONFIG_START_MONTH=9 +CONFIG_START_DAY=21 +CONFIG_GREGORIAN_TIME=n +CONFIG_JULIAN_TIME=n +CONFIG_DEV_CONSOLE=y +CONFIG_DEV_LOWCONSOLE=n +CONFIG_MUTEX_TYPES=n +CONFIG_PRIORITY_INHERITANCE=n +CONFIG_SEM_PREALLOCHOLDERS=0 +CONFIG_SEM_NNESTPRIO=0 +CONFIG_FDCLONE_DISABLE=n +CONFIG_FDCLONE_STDIO=y +CONFIG_SDCLONE_DISABLE=y +CONFIG_NXFLAT=n +CONFIG_SCHED_WORKQUEUE=n +CONFIG_SCHED_WORKPRIORITY=50 +CONFIG_SCHED_WORKPERIOD=(50*1000) +CONFIG_SCHED_WORKSTACKSIZE=512 +CONFIG_SIG_SIGWORK=4 + +# +# The following can be used to disable categories of +# APIs supported by the OS. If the compiler supports +# weak functions, then it should not be necessary to +# disable functions unless you want to restrict usage +# of those APIs. +# +# There are certain dependency relationships in these +# features. +# +# o mq_notify logic depends on signals to awaken tasks +# waiting for queues to become full or empty. +# o pthread_condtimedwait() depends on signals to wake +# up waiting tasks. +# +CONFIG_DISABLE_CLOCK=n +CONFIG_DISABLE_POSIX_TIMERS=y +CONFIG_DISABLE_PTHREAD=n +CONFIG_DISABLE_SIGNALS=n +CONFIG_DISABLE_MQUEUE=y +CONFIG_DISABLE_MOUNTPOINT=y +CONFIG_DISABLE_ENVIRON=y +CONFIG_DISABLE_POLL=y + +# +# Misc libc settings +# +# CONFIG_NOPRINTF_FIELDWIDTH - sprintf-related logic is a +# little smaller if we do not support fieldwidthes +# +CONFIG_NOPRINTF_FIELDWIDTH=n + +# +# Allow for architecture optimized implementations +# +# The architecture can provide optimized versions of the +# following to improve system performance +# +CONFIG_ARCH_MEMCPY=n +CONFIG_ARCH_MEMCMP=n +CONFIG_ARCH_MEMMOVE=n +CONFIG_ARCH_MEMSET=n +CONFIG_ARCH_STRCMP=n +CONFIG_ARCH_STRCPY=n +CONFIG_ARCH_STRNCPY=n +CONFIG_ARCH_STRLEN=n +CONFIG_ARCH_STRNLEN=n +CONFIG_ARCH_BZERO=n + +# +# Sizes of configurable things (0 disables) +# +# CONFIG_MAX_TASKS - The maximum number of simultaneously +# active tasks. This value must be a power of two. +# CONFIG_MAX_TASK_ARGS - This controls the maximum number of +# of parameters that a task may receive (i.e., maxmum value +# of 'argc') +# CONFIG_NPTHREAD_KEYS - The number of items of thread- +# specific data that can be retained +# CONFIG_NFILE_DESCRIPTORS - The maximum number of file +# descriptors (one for each open) +# CONFIG_NFILE_STREAMS - The maximum number of streams that +# can be fopen'ed +# CONFIG_NAME_MAX - The maximum size of a file name. +# CONFIG_STDIO_BUFFER_SIZE - Size of the buffer to allocate +# on fopen. (Only if CONFIG_NFILE_STREAMS > 0) +# CONFIG_NUNGET_CHARS - Number of characters that can be +# buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0) +# CONFIG_PREALLOC_MQ_MSGS - The number of pre-allocated message +# structures. The system manages a pool of preallocated +# message structures to minimize dynamic allocations +# CONFIG_MQ_MAXMSGSIZE - Message structures are allocated with +# a fixed payload size given by this settin (does not include +# other message structure overhead. +# CONFIG_MAX_WDOGPARMS - Maximum number of parameters that +# can be passed to a watchdog handler +# CONFIG_PREALLOC_WDOGS - The number of pre-allocated watchdog +# structures. The system manages a pool of preallocated +# watchdog structures to minimize dynamic allocations +# CONFIG_PREALLOC_TIMERS - The number of pre-allocated POSIX +# timer structures. The system manages a pool of preallocated +# timer structures to minimize dynamic allocations. Set to +# zero for all dynamic allocations. +# +CONFIG_MAX_TASKS=4 +CONFIG_MAX_TASK_ARGS=4 +CONFIG_NPTHREAD_KEYS=2 +CONFIG_NFILE_DESCRIPTORS=6 +CONFIG_NFILE_STREAMS=4 +CONFIG_NAME_MAX=32 +CONFIG_STDIO_BUFFER_SIZE=64 +CONFIG_NUNGET_CHARS=2 +CONFIG_PREALLOC_MQ_MSGS=1 +CONFIG_MQ_MAXMSGSIZE=32 +CONFIG_MAX_WDOGPARMS=2 +CONFIG_PREALLOC_WDOGS=3 +CONFIG_PREALLOC_TIMERS=1 + + +# +# Settings for apps/nshlib +# +# CONFIG_NSH_BUILTIN_APPS - Support external registered, +# "named" applications that can be executed from the NSH +# command line (see apps/README.txt for more information). +# CONFIG_NSH_FILEIOSIZE - Size of a static I/O buffer +# CONFIG_NSH_STRERROR - Use strerror(errno) +# CONFIG_NSH_LINELEN - Maximum length of one command line +# CONFIG_NSH_NESTDEPTH - Max number of nested if-then[-else]-fi +# CONFIG_NSH_DISABLESCRIPT - Disable scripting support +# CONFIG_NSH_DISABLEBG - Disable background commands +# CONFIG_NSH_ROMFSETC - Use startup script in /etc +# CONFIG_NSH_CONSOLE - Use serial console front end +# CONFIG_NSH_TELNET - Use telnetd console front end +# CONFIG_NSH_ARCHINIT - Platform provides architecture +# specific initialization (nsh_archinitialize()). +# +# If CONFIG_NSH_TELNET is selected: +# CONFIG_NSH_IOBUFFER_SIZE -- Telnetd I/O buffer size +# CONFIG_NSH_DHCPC - Obtain address using DHCP +# CONFIG_NSH_IPADDR - Provides static IP address +# CONFIG_NSH_DRIPADDR - Provides static router IP address +# CONFIG_NSH_NETMASK - Provides static network mask +# CONFIG_NSH_NOMAC - Use a bogus MAC address +# +# If CONFIG_NSH_ROMFSETC is selected: +# CONFIG_NSH_ROMFSMOUNTPT - ROMFS mountpoint +# CONFIG_NSH_INITSCRIPT - Relative path to init script +# CONFIG_NSH_ROMFSDEVNO - ROMFS RAM device minor +# CONFIG_NSH_ROMFSSECTSIZE - ROMF sector size +# CONFIG_NSH_FATDEVNO - FAT FS RAM device minor +# CONFIG_NSH_FATSECTSIZE - FAT FS sector size +# CONFIG_NSH_FATNSECTORS - FAT FS number of sectors +# CONFIG_NSH_FATMOUNTPT - FAT FS mountpoint +# +CONFIG_NSH_BUILTIN_APPS=y +CONFIG_NSH_FILEIOSIZE=64 +CONFIG_NSH_STRERROR=n +CONFIG_NSH_LINELEN=64 +CONFIG_NSH_NESTDEPTH=1 +CONFIG_NSH_DISABLESCRIPT=y +CONFIG_NSH_DISABLEBG=n +CONFIG_NSH_ROMFSETC=n +CONFIG_NSH_CONSOLE=y +CONFIG_NSH_TELNET=n +CONFIG_NSH_ARCHINIT=y +CONFIG_NSH_IOBUFFER_SIZE=256 +#CONFIG_NSH_STACKSIZE=1024 +CONFIG_NSH_DHCPC=n +CONFIG_NSH_NOMAC=n +CONFIG_NSH_IPADDR=(10<<24|0<<16|0<<8|2) +CONFIG_NSH_DRIPADDR=(10<<24|0<<16|0<<8|1) +CONFIG_NSH_NETMASK=(255<<24|255<<16|255<<8|0) +CONFIG_NSH_ROMFSMOUNTPT="/etc" +CONFIG_NSH_INITSCRIPT="init.d/rcS" +CONFIG_NSH_ROMFSDEVNO=0 +CONFIG_NSH_ROMFSSECTSIZE=64 +CONFIG_NSH_FATDEVNO=1 +CONFIG_NSH_FATSECTSIZE=512 +CONFIG_NSH_FATNSECTORS=1024 +CONFIG_NSH_FATMOUNTPT=/tmp + +# +# Architecture-specific NSH options +# +CONFIG_NSH_MMCSDSPIPORTNO=0 +CONFIG_NSH_MMCSDSLOTNO=0 +CONFIG_NSH_MMCSDMINOR=0 + +# +# Stack and heap information +# +# CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP +# operation from FLASH but must copy initialized .data sections to RAM. +# (should also be =n for the STM3210E-EVAL which always runs from flash) +# CONFIG_BOOT_COPYTORAM - Some configurations boot in FLASH +# but copy themselves entirely into RAM for better performance. +# CONFIG_CUSTOM_STACK - The up_ implementation will handle +# all stack operations outside of the nuttx model. +# CONFIG_STACK_POINTER - The initial stack pointer (arm7tdmi only) +# CONFIG_IDLETHREAD_STACKSIZE - The size of the initial stack. +# This is the thread that (1) performs the inital boot of the system up +# to the point where user_start() is spawned, and (2) there after is the +# IDLE thread that executes only when there is no other thread ready to +# run. +# CONFIG_USERMAIN_STACKSIZE - The size of the stack to allocate +# for the main user thread that begins at the user_start() entry point. +# CONFIG_PTHREAD_STACK_MIN - Minimum pthread stack size +# CONFIG_PTHREAD_STACK_DEFAULT - Default pthread stack size +# CONFIG_HEAP_BASE - The beginning of the heap +# CONFIG_HEAP_SIZE - The size of the heap +# +CONFIG_BOOT_RUNFROMFLASH=n +CONFIG_BOOT_COPYTORAM=n +CONFIG_CUSTOM_STACK=n +CONFIG_STACK_POINTER= +CONFIG_IDLETHREAD_STACKSIZE=800 +CONFIG_USERMAIN_STACKSIZE=1024 +CONFIG_PTHREAD_STACK_MIN=256 +CONFIG_PTHREAD_STACK_DEFAULT=512 +CONFIG_HEAP_BASE= +CONFIG_HEAP_SIZE= diff --git a/nuttx/configs/px4io-v1/nsh/setenv.sh b/nuttx/configs/px4io-v1/nsh/setenv.sh new file mode 100755 index 000000000..d83685192 --- /dev/null +++ b/nuttx/configs/px4io-v1/nsh/setenv.sh @@ -0,0 +1,47 @@ +#!/bin/bash +# configs/stm3210e-eval/dfu/setenv.sh +# +# Copyright (C) 2009 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt <spudmonkey@racsa.co.cr> +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# + +if [ "$(basename $0)" = "setenv.sh" ] ; then + echo "You must source this script, not run it!" 1>&2 + exit 1 +fi + +if [ -z "${PATH_ORIG}" ]; then export PATH_ORIG="${PATH}"; fi + +WD=`pwd` +export RIDE_BIN="/cygdrive/c/Program Files/Raisonance/Ride/arm-gcc/bin" +export BUILDROOT_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin" +export PATH="${BUILDROOT_BIN}:${RIDE_BIN}:/sbin:/usr/sbin:${PATH_ORIG}" + +echo "PATH : ${PATH}" diff --git a/nuttx/configs/px4io-v1/src/Makefile b/nuttx/configs/px4io-v1/src/Makefile new file mode 100644 index 000000000..bb9539d16 --- /dev/null +++ b/nuttx/configs/px4io-v1/src/Makefile @@ -0,0 +1,84 @@ +############################################################################ +# configs/stm3210e-eval/src/Makefile +# +# Copyright (C) 2009-2010 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt <spudmonkey@racsa.co.cr> +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ + +-include $(TOPDIR)/Make.defs + +CFLAGS += -I$(TOPDIR)/sched + +ASRCS = +AOBJS = $(ASRCS:.S=$(OBJEXT)) + +CSRCS = empty.c + +COBJS = $(CSRCS:.c=$(OBJEXT)) + +SRCS = $(ASRCS) $(CSRCS) +OBJS = $(AOBJS) $(COBJS) + +ARCH_SRCDIR = $(TOPDIR)/arch/$(CONFIG_ARCH)/src +ifeq ($(WINTOOL),y) + CFLAGS += -I "${shell cygpath -w $(ARCH_SRCDIR)/chip}" \ + -I "${shell cygpath -w $(ARCH_SRCDIR)/common}" \ + -I "${shell cygpath -w $(ARCH_SRCDIR)/armv7-m}" +else + CFLAGS += -I$(ARCH_SRCDIR)/chip -I$(ARCH_SRCDIR)/common -I$(ARCH_SRCDIR)/armv7-m +endif + +all: libboard$(LIBEXT) + +$(AOBJS): %$(OBJEXT): %.S + $(call ASSEMBLE, $<, $@) + +$(COBJS) $(LINKOBJS): %$(OBJEXT): %.c + $(call COMPILE, $<, $@) + +libboard$(LIBEXT): $(OBJS) + $(call ARCHIVE, $@, $(OBJS)) + +.depend: Makefile $(SRCS) + @$(MKDEP) $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep + @touch $@ + +depend: .depend + +clean: + $(call DELFILE, libboard$(LIBEXT)) + $(call CLEAN) + +distclean: clean + $(call DELFILE, Make.dep) + $(call DELFILE, .depend) + +-include Make.dep diff --git a/nuttx/configs/px4io-v1/src/README.txt b/nuttx/configs/px4io-v1/src/README.txt new file mode 100644 index 000000000..d4eda82fd --- /dev/null +++ b/nuttx/configs/px4io-v1/src/README.txt @@ -0,0 +1 @@ +This directory contains drivers unique to the STMicro STM3210E-EVAL development board. diff --git a/nuttx/configs/px4io-v1/src/drv_i2c_device.c b/nuttx/configs/px4io-v1/src/drv_i2c_device.c new file mode 100644 index 000000000..1f5931ae5 --- /dev/null +++ b/nuttx/configs/px4io-v1/src/drv_i2c_device.c @@ -0,0 +1,618 @@ +/**************************************************************************** + * + * Copyright (C) 2012 PX4 Development Team. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + + /** + * @file A simple, polled I2C slave-mode driver. + * + * The master writes to and reads from a byte buffer, which the caller + * can update inbetween calls to the FSM. + */ + +#include <stdbool.h> + +#include "stm32_i2c.h" + +#include <string.h> + +/* + * I2C register definitions. + */ +#define I2C_BASE STM32_I2C1_BASE + +#define REG(_reg) (*(volatile uint32_t *)(I2C_BASE + _reg)) + +#define rCR1 REG(STM32_I2C_CR1_OFFSET) +#define rCR2 REG(STM32_I2C_CR2_OFFSET) +#define rOAR1 REG(STM32_I2C_OAR1_OFFSET) +#define rOAR2 REG(STM32_I2C_OAR2_OFFSET) +#define rDR REG(STM32_I2C_DR_OFFSET) +#define rSR1 REG(STM32_I2C_SR1_OFFSET) +#define rSR2 REG(STM32_I2C_SR2_OFFSET) +#define rCCR REG(STM32_I2C_CCR_OFFSET) +#define rTRISE REG(STM32_I2C_TRISE_OFFSET) + +/* + * "event" values (cr2 << 16 | cr1) as described in the ST DriverLib + */ +#define I2C_EVENT_SLAVE_RECEIVER_ADDRESS_MATCHED ((uint32_t)0x00020002) /* BUSY and ADDR flags */ +#define I2C_EVENT_SLAVE_TRANSMITTER_ADDRESS_MATCHED ((uint32_t)0x00060082) /* TRA, BUSY, TXE and ADDR flags */ +#define I2C_EVENT_SLAVE_BYTE_RECEIVED ((uint32_t)0x00020040) /* BUSY and RXNE flags */ +#define I2C_EVENT_SLAVE_STOP_DETECTED ((uint32_t)0x00000010) /* STOPF flag */ +#define I2C_EVENT_SLAVE_BYTE_TRANSMITTED ((uint32_t)0x00060084) /* TRA, BUSY, TXE and BTF flags */ +#define I2C_EVENT_SLAVE_BYTE_TRANSMITTING ((uint32_t)0x00060080) /* TRA, BUSY and TXE flags */ +#define I2C_EVENT_SLAVE_ACK_FAILURE ((uint32_t)0x00000400) /* AF flag */ + +/** + * States implemented by the I2C FSM. + */ +enum fsm_state { + BAD_PHASE, // must be zero, default exit on a bad state transition + + WAIT_FOR_MASTER, + + /* write from master */ + WAIT_FOR_COMMAND, + RECEIVE_COMMAND, + RECEIVE_DATA, + HANDLE_COMMAND, + + /* read from master */ + WAIT_TO_SEND, + SEND_STATUS, + SEND_DATA, + + NUM_STATES +}; + +/** + * Events recognised by the I2C FSM. + */ +enum fsm_event { + /* automatic transition */ + AUTO, + + /* write from master */ + ADDRESSED_WRITE, + BYTE_RECEIVED, + STOP_RECEIVED, + + /* read from master */ + ADDRESSED_READ, + BYTE_SENDABLE, + ACK_FAILED, + + NUM_EVENTS +}; + +/** + * Context for the I2C FSM + */ +static struct fsm_context { + enum fsm_state state; + + /* XXX want to eliminate these */ + uint8_t command; + uint8_t status; + + uint8_t *data_ptr; + uint32_t data_count; + + size_t buffer_size; + uint8_t *buffer; +} context; + +/** + * Structure defining one FSM state and its outgoing transitions. + */ +struct fsm_transition { + void (*handler)(void); + enum fsm_state next_state[NUM_EVENTS]; +}; + +static bool i2c_command_received; + +static void fsm_event(enum fsm_event event); + +static void go_bad(void); +static void go_wait_master(void); + +static void go_wait_command(void); +static void go_receive_command(void); +static void go_receive_data(void); +static void go_handle_command(void); + +static void go_wait_send(void); +static void go_send_status(void); +static void go_send_buffer(void); + +/** + * The FSM state graph. + */ +static const struct fsm_transition fsm[NUM_STATES] = { + [BAD_PHASE] = { + .handler = go_bad, + .next_state = { + [AUTO] = WAIT_FOR_MASTER, + }, + }, + + [WAIT_FOR_MASTER] = { + .handler = go_wait_master, + .next_state = { + [ADDRESSED_WRITE] = WAIT_FOR_COMMAND, + [ADDRESSED_READ] = WAIT_TO_SEND, + }, + }, + + /* write from master*/ + [WAIT_FOR_COMMAND] = { + .handler = go_wait_command, + .next_state = { + [BYTE_RECEIVED] = RECEIVE_COMMAND, + [STOP_RECEIVED] = WAIT_FOR_MASTER, + }, + }, + [RECEIVE_COMMAND] = { + .handler = go_receive_command, + .next_state = { + [BYTE_RECEIVED] = RECEIVE_DATA, + [STOP_RECEIVED] = HANDLE_COMMAND, + }, + }, + [RECEIVE_DATA] = { + .handler = go_receive_data, + .next_state = { + [BYTE_RECEIVED] = RECEIVE_DATA, + [STOP_RECEIVED] = HANDLE_COMMAND, + }, + }, + [HANDLE_COMMAND] = { + .handler = go_handle_command, + .next_state = { + [AUTO] = WAIT_FOR_MASTER, + }, + }, + + /* buffer send */ + [WAIT_TO_SEND] = { + .handler = go_wait_send, + .next_state = { + [BYTE_SENDABLE] = SEND_STATUS, + }, + }, + [SEND_STATUS] = { + .handler = go_send_status, + .next_state = { + [BYTE_SENDABLE] = SEND_DATA, + [ACK_FAILED] = WAIT_FOR_MASTER, + }, + }, + [SEND_DATA] = { + .handler = go_send_buffer, + .next_state = { + [BYTE_SENDABLE] = SEND_DATA, + [ACK_FAILED] = WAIT_FOR_MASTER, + }, + }, +}; + + +/* debug support */ +#if 1 +struct fsm_logentry { + char kind; + uint32_t code; +}; + +#define LOG_ENTRIES 32 +static struct fsm_logentry fsm_log[LOG_ENTRIES]; +int fsm_logptr; +#define LOG_NEXT(_x) (((_x) + 1) % LOG_ENTRIES) +#define LOGx(_kind, _code) \ + do { \ + fsm_log[fsm_logptr].kind = _kind; \ + fsm_log[fsm_logptr].code = _code; \ + fsm_logptr = LOG_NEXT(fsm_logptr); \ + fsm_log[fsm_logptr].kind = 0; \ + } while(0) + +#define LOG(_kind, _code) \ + do {\ + if (fsm_logptr < LOG_ENTRIES) { \ + fsm_log[fsm_logptr].kind = _kind; \ + fsm_log[fsm_logptr].code = _code; \ + fsm_logptr++;\ + }\ + }while(0) + +#else +#define LOG(_kind, _code) +#endif + + +static void i2c_setclock(uint32_t frequency); + +/** + * Initialise I2C + * + */ +void +i2c_fsm_init(uint8_t *buffer, size_t buffer_size) +{ + /* save the buffer */ + context.buffer = buffer; + context.buffer_size = buffer_size; + + // initialise the FSM + context.status = 0; + context.command = 0; + context.state = BAD_PHASE; + fsm_event(AUTO); + +#if 0 + // enable the i2c block clock and reset it + modifyreg32(STM32_RCC_APB1ENR, 0, RCC_APB1ENR_I2C1EN); + modifyreg32(STM32_RCC_APB1RSTR, 0, RCC_APB1RSTR_I2C1RST); + modifyreg32(STM32_RCC_APB1RSTR, RCC_APB1RSTR_I2C1RST, 0); + + // configure the i2c GPIOs + stm32_configgpio(GPIO_I2C1_SCL); + stm32_configgpio(GPIO_I2C1_SDA); + + // set the peripheral clock to match the APB clock + rCR2 = STM32_PCLK1_FREQUENCY / 1000000; + + // configure for 100kHz operation + i2c_setclock(100000); + + // enable i2c + rCR1 = I2C_CR1_PE; +#endif +} + +/** + * Run the I2C FSM for some period. + * + * @return True if the buffer has been updated by a command. + */ +bool +i2c_fsm(void) +{ + uint32_t event; + int idle_iterations = 0; + + for (;;) { + // handle bus error states by discarding the current operation + if (rSR1 & I2C_SR1_BERR) { + context.state = WAIT_FOR_MASTER; + rSR1 = ~I2C_SR1_BERR; + } + + // we do not anticipate over/underrun errors as clock-stretching is enabled + + // fetch the most recent event + event = ((rSR2 << 16) | rSR1) & 0x00ffffff; + + // generate FSM events based on I2C events + switch (event) { + case I2C_EVENT_SLAVE_RECEIVER_ADDRESS_MATCHED: + LOG('w', 0); + fsm_event(ADDRESSED_WRITE); + break; + + case I2C_EVENT_SLAVE_TRANSMITTER_ADDRESS_MATCHED: + LOG('r', 0); + fsm_event(ADDRESSED_READ); + break; + + case I2C_EVENT_SLAVE_BYTE_RECEIVED: + LOG('R', 0); + fsm_event(BYTE_RECEIVED); + break; + + case I2C_EVENT_SLAVE_STOP_DETECTED: + LOG('s', 0); + fsm_event(STOP_RECEIVED); + break; + + case I2C_EVENT_SLAVE_BYTE_TRANSMITTING: + //case I2C_EVENT_SLAVE_BYTE_TRANSMITTED: + LOG('T', 0); + fsm_event(BYTE_SENDABLE); + break; + + case I2C_EVENT_SLAVE_ACK_FAILURE: + LOG('a', 0); + fsm_event(ACK_FAILED); + break; + + default: + idle_iterations++; +// if ((event) && (event != 0x00020000)) +// LOG('e', event); + break; + } + + /* if we have just received something, drop out and let the caller handle it */ + if (i2c_command_received) { + i2c_command_received = false; + return true; + } + + /* if we have done nothing recently, drop out and let the caller have a slice */ + if (idle_iterations > 1000) + return false; + } +} + +/** + * Update the FSM with an event + * + * @param event New event. + */ +static void +fsm_event(enum fsm_event event) +{ + // move to the next state + context.state = fsm[context.state].next_state[event]; + + LOG('f', context.state); + + // call the state entry handler + if (fsm[context.state].handler) { + fsm[context.state].handler(); + } +} + +static void +go_bad() +{ + LOG('B', 0); + fsm_event(AUTO); +} + +/** + * Wait for the master to address us. + * + */ +static void +go_wait_master() +{ + // We currently don't have a command byte. + // + context.command = '\0'; + + // The data pointer starts pointing to the start of the data buffer. + // + context.data_ptr = context.buffer; + + // The data count is either: + // - the size of the data buffer + // - some value less than or equal the size of the data buffer during a write or a read + // + context.data_count = context.buffer_size; + + // (re)enable the peripheral, clear the stop event flag in + // case we just finished receiving data + rCR1 |= I2C_CR1_PE; + + // clear the ACK failed flag in case we just finished sending data + rSR1 = ~I2C_SR1_AF; +} + +/** + * Prepare to receive a command byte. + * + */ +static void +go_wait_command() +{ + // NOP +} + +/** + * Command byte has been received, save it and prepare to handle the data. + * + */ +static void +go_receive_command() +{ + + // fetch the command byte + context.command = (uint8_t)rDR; + LOG('c', context.command); + +} + +/** + * Receive a data byte. + * + */ +static void +go_receive_data() +{ + uint8_t d; + + // fetch the byte + d = (uint8_t)rDR; + LOG('d', d); + + // if we have somewhere to put it, do so + if (context.data_count) { + *context.data_ptr++ = d; + context.data_count--; + } +} + +/** + * Handle a command once the host is done sending it to us. + * + */ +static void +go_handle_command() +{ + // presume we are happy with the command + context.status = 0; + + // make a note that the buffer contains a fresh command + i2c_command_received = true; + + // kick along to the next state + fsm_event(AUTO); +} + +/** + * Wait to be able to send the status byte. + * + */ +static void +go_wait_send() +{ + // NOP +} + +/** + * Send the status byte. + * + */ +static void +go_send_status() +{ + rDR = context.status; + LOG('?', context.status); +} + +/** + * Send a data or pad byte. + * + */ +static void +go_send_buffer() +{ + if (context.data_count) { + LOG('D', *context.data_ptr); + rDR = *(context.data_ptr++); + context.data_count--; + } else { + LOG('-', 0); + rDR = 0xff; + } +} + +/* cribbed directly from the NuttX master driver */ +static void +i2c_setclock(uint32_t frequency) +{ + uint16_t cr1; + uint16_t ccr; + uint16_t trise; + uint16_t freqmhz; + uint16_t speed; + + /* Disable the selected I2C peripheral to configure TRISE */ + + cr1 = rCR1; + rCR1 &= ~I2C_CR1_PE; + + /* Update timing and control registers */ + + freqmhz = (uint16_t)(STM32_PCLK1_FREQUENCY / 1000000); + ccr = 0; + + /* Configure speed in standard mode */ + + if (frequency <= 100000) { + /* Standard mode speed calculation */ + + speed = (uint16_t)(STM32_PCLK1_FREQUENCY / (frequency << 1)); + + /* The CCR fault must be >= 4 */ + + if (speed < 4) { + /* Set the minimum allowed value */ + + speed = 4; + } + ccr |= speed; + + /* Set Maximum Rise Time for standard mode */ + + trise = freqmhz + 1; + + /* Configure speed in fast mode */ + } else { /* (frequency <= 400000) */ + /* Fast mode speed calculation with Tlow/Thigh = 16/9 */ + +#ifdef CONFIG_I2C_DUTY16_9 + speed = (uint16_t)(STM32_PCLK1_FREQUENCY / (frequency * 25)); + + /* Set DUTY and fast speed bits */ + + ccr |= (I2C_CCR_DUTY|I2C_CCR_FS); +#else + /* Fast mode speed calculation with Tlow/Thigh = 2 */ + + speed = (uint16_t)(STM32_PCLK1_FREQUENCY / (frequency * 3)); + + /* Set fast speed bit */ + + ccr |= I2C_CCR_FS; +#endif + + /* Verify that the CCR speed value is nonzero */ + + if (speed < 1) { + /* Set the minimum allowed value */ + + speed = 1; + } + ccr |= speed; + + /* Set Maximum Rise Time for fast mode */ + + trise = (uint16_t)(((freqmhz * 300) / 1000) + 1); + } + + /* Write the new values of the CCR and TRISE registers */ + + rCCR = ccr; + rTRISE = trise; + + /* Bit 14 of OAR1 must be configured and kept at 1 */ + + rOAR1 = I2C_OAR1_ONE); + + /* Re-enable the peripheral (or not) */ + + rCR1 = cr1; +} diff --git a/nuttx/configs/px4io-v1/src/empty.c b/nuttx/configs/px4io-v1/src/empty.c new file mode 100644 index 000000000..ace900866 --- /dev/null +++ b/nuttx/configs/px4io-v1/src/empty.c @@ -0,0 +1,4 @@ +/* + * There are no source files here, but libboard.a can't be empty, so + * we have this empty source file to keep it company. + */ |