Add support for the STM32 Tiny development board from Laurent Latil

23 files changed, 4055 insertions, 1 deletions

diff --git a/nuttx/ChangeLog b/nuttx/ChangeLog
index e495a7a6e..50623ef24 100644
--- a/nuttx/ChangeLog
+++ b/nuttx/ChangeLog
@@ -4822,4 +4822,9 @@
 	  cannot be used reliably with the PIC32 USB.  With this change the
 	  configs/sure-pic32mx/usbnsh configuration works great (2013-5-28).
 	* configs/sure-pic32mx/src/pic32mx_nsh.c:  The NSH configurations will
-	  support the USB monitor applications (2013-5-28).
\ No newline at end of file
+	  support the USB monitor applications (2013-5-28).
+	 nuttx/arch/arm/include/stm32/chip.h, src/stm32/Kconfig, src/stm32/chip.h,
+	  and src/stm32/chip/stm32f103c_pinmap.h: STM32F103C4 and F103C8 chip
+	  support from Laurent Latil (2013-5-28)
+	* configs/stm32_tiny: Add support for the STM32 Tiny development board
+	  based on th STM32 F103C8T6 MCU (2013-5-28).
diff --git a/nuttx/arch/arm/src/stm32/Kconfig b/nuttx/arch/arm/src/stm32/Kconfig
index d495a5ad1..5eee354b9 100644
--- a/nuttx/arch/arm/src/stm32/Kconfig
+++ b/nuttx/arch/arm/src/stm32/Kconfig
@@ -443,9 +443,11 @@ config STM32_VALUELINE
 
 config STM32_CONNECTIVITYLINE
 	bool
+	default n
 
 config STM32_PERFORMANCELINE
 	bool
+	default n
 
 config STM32_HIGHDENSITY
 	bool
diff --git a/nuttx/configs/Kconfig b/nuttx/configs/Kconfig
index 6513a8a23..f7ee6d9c0 100644
--- a/nuttx/configs/Kconfig
+++ b/nuttx/configs/Kconfig
@@ -494,6 +494,15 @@ config ARCH_BOARD_SKP16C26
 		uses the GNU m32c toolchain.  STATUS:  The port is complete but untested
 		due to issues with compiler internal errors.
 
+config ARCH_BOARD_STM32_TINY
+	bool "STM32-Tiny board"
+	depends on ARCH_CHIP_STM32F103C8
+	select ARCH_HAVE_LEDS
+	---help---
+		A configuration for the STM32 Tiny board. This board is based on a
+		STM32F103C8T6 micro-controller chip, and is (always ?) bundled with
+		an nRF24L01+ wireless module.
+
 config ARCH_BOARD_STM3210E_EVAL
 	bool "STMicro STM3210E-EVAL development board"
 	depends on ARCH_CHIP_STM32F103ZET6
@@ -765,6 +774,7 @@ config ARCH_BOARD
 	default "sam3u-ek"            if ARCH_BOARD_SAM3UEK
 	default "shenzhou"            if ARCH_BOARD_SHENZHOU
 	default "skp16c26"            if ARCH_BOARD_SKP16C26
+	default "stm32_tiny"          if ARCH_BOARD_STM32_TINY
 	default "stm3210e-eval"       if ARCH_BOARD_STM3210E_EVAL
 	default "stm3220g-eval"       if ARCH_BOARD_STM3220G_EVAL
 	default "stm3240g-eval"       if ARCH_BOARD_STM3240G_EVAL
@@ -988,6 +998,9 @@ endif
 if ARCH_BOARD_SKP16C26
 source "configs/skp16c26/Kconfig"
 endif
+if ARCH_BOARD_STM32_TINY
+source "configs/stm32_tiny/Kconfig"
+endif
 if ARCH_BOARD_STM3210E_EVAL
 source "configs/stm3210e-eval/Kconfig"
 endif
diff --git a/nuttx/configs/stm32_tiny/Kconfig b/nuttx/configs/stm32_tiny/Kconfig
new file mode 100644
index 000000000..ebb8bbfe4
--- /dev/null
+++ b/nuttx/configs/stm32_tiny/Kconfig
@@ -0,0 +1,7 @@
+#
+# For a description of the syntax of this configuration file,
+# see misc/tools/kconfig-language.txt.
+#
+
+if ARCH_BOARD_STM32_TINY
+endif
diff --git a/nuttx/configs/stm32_tiny/README.txt b/nuttx/configs/stm32_tiny/README.txt
new file mode 100644
index 000000000..c0bc8f588
--- /dev/null
+++ b/nuttx/configs/stm32_tiny/README.txt
@@ -0,0 +1,711 @@
+README
+======
+
+This README discusses issues unique to NuttX configurations for the
+STM32 Tiny development board.
+
+This board is available from several vendors on the net, and may
+be sold under different names. It is based on a STM32 F103C8T6 MCU, and
+is (always ?) bundled with a nRF24L01 wireless communication module. 
+
+Contents
+========
+
+  - Development Environment
+  - GNU Toolchain Options
+  - IDEs
+  - NuttX EABI "buildroot" Toolchain
+  - NuttX OABI "buildroot" Toolchain
+  - NXFLAT Toolchain
+  - LEDs
+  - PWM
+  - UARTs
+  - Timer Inputs/Outputs
+  - STM32 Tiny -specific Configuration Options
+  - Configurations
+
+Development Environment
+=======================
+
+  Either Linux or Cygwin on Windows can be used for the development environment.
+  The source has been built only using the GNU toolchain (see below).  Other
+  toolchains will likely cause problems.
+
+GNU Toolchain Options
+=====================
+
+  Toolchain Configurations
+  ------------------------
+  The NuttX make system has been modified to support the following different
+  toolchain options.
+
+  1. The CodeSourcery GNU toolchain,
+  2. The Atollic Toolchain, 
+  3. The devkitARM GNU toolchain,
+  4. Raisonance GNU toolchain, or
+  5. The NuttX buildroot Toolchain (see below).
+
+  All testing has been conducted using the CodeSourcery toolchain for Windows.  To use
+  the Atollic, devkitARM, Raisonance GNU, or NuttX buildroot toolchain, you simply need to
+  add one of the following configuration options to your .config (or defconfig)
+  file:
+
+    CONFIG_STM32_CODESOURCERYW=y  : CodeSourcery under Windows
+    CONFIG_STM32_CODESOURCERYL=y  : CodeSourcery under Linux
+    CONFIG_STM32_ATOLLIC_LITE=y   : The free, "Lite" version of Atollic toolchain under Windows
+    CONFIG_STM32_ATOLLIC_PRO=y    : The paid, "Pro" version of Atollic toolchain under Windows
+    CONFIG_STM32_DEVKITARM=y      : devkitARM under Windows
+    CONFIG_STM32_RAISONANCE=y     : Raisonance RIDE7 under Windows
+    CONFIG_STM32_BUILDROOT=y      : NuttX buildroot under Linux or Cygwin (default)
+
+  If you change the default toolchain, then you may also have to modify the PATH in
+  the setenv.h file if your make cannot find the tools.
+
+  NOTE: the CodeSourcery (for Windows), Atollic, devkitARM, and Raisonance toolchains are
+  Windows native toolchains.  The CodeSourcey (for Linux) and NuttX buildroot
+  toolchains are Cygwin and/or Linux native toolchains. There are several limitations
+  to using a Windows based toolchain in a Cygwin environment.  The three biggest are:
+
+  1. The Windows toolchain cannot follow Cygwin paths.  Path conversions are
+     performed automatically in the Cygwin makefiles using the 'cygpath' utility
+     but you might easily find some new path problems.  If so, check out 'cygpath -w'
+
+  2. Windows toolchains cannot follow Cygwin symbolic links.  Many symbolic links
+     are used in Nuttx (e.g., include/arch).  The make system works around these
+     problems for the Windows tools by copying directories instead of linking them.
+     But this can also cause some confusion for you:  For example, you may edit
+     a file in a "linked" directory and find that your changes had no effect.
+     That is because you are building the copy of the file in the "fake" symbolic
+     directory.  If you use a Windows toolchain, you should get in the habit of
+     making like this:
+
+       make clean_context all
+
+     An alias in your .bashrc file might make that less painful.
+
+  3. Dependencies are not made when using Windows versions of the GCC.  This is
+     because the dependencies are generated using Windows pathes which do not
+     work with the Cygwin make.
+
+       MKDEP                = $(TOPDIR)/tools/mknulldeps.sh
+
+  The CodeSourcery Toolchain (2009q1)
+  -----------------------------------
+  The CodeSourcery toolchain (2009q1) does not work with default optimization
+  level of -Os (See Make.defs).  It will work with -O0, -O1, or -O2, but not with
+  -Os.
+
+  The Atollic "Pro" and "Lite" Toolchain
+  --------------------------------------
+  One problem that I had with the Atollic toolchains is that the provide a gcc.exe
+  and g++.exe in the same bin/ file as their ARM binaries.  If the Atollic bin/ path
+  appears in your PATH variable before /usr/bin, then you will get the wrong gcc
+  when you try to build host executables.  This will cause to strange, uninterpretable
+  errors build some host binaries in tools/ when you first make.
+
+  Also, the Atollic toolchains are the only toolchains that have built-in support for
+  the FPU in these configurations.  If you plan to use the Cortex-M4 FPU, you will
+  need to use the Atollic toolchain for now.  See the FPU section below for more
+  information.
+
+  The Atollic "Lite" Toolchain
+  ----------------------------
+  The free, "Lite" version of the Atollic toolchain does not support C++ nor
+  does it support ar, nm, objdump, or objdcopy. If you use the Atollic "Lite"
+  toolchain, you will have to set:
+
+    CONFIG_HAVE_CXX=n
+
+  In order to compile successfully.  Otherwise, you will get errors like:
+
+    "C++ Compiler only available in TrueSTUDIO Professional"
+  
+  The make may then fail in some of the post link processing because of some of
+  the other missing tools.  The Make.defs file replaces the ar and nm with
+  the default system x86 tool versions and these seem to work okay.  Disable all
+  of the following to avoid using objcopy:
+
+    CONFIG_RRLOAD_BINARY=n
+    CONFIG_INTELHEX_BINARY=n
+    CONFIG_MOTOROLA_SREC=n
+    CONFIG_RAW_BINARY=n
+
+  devkitARM
+  ---------
+  The devkitARM toolchain includes a version of MSYS make.  Make sure that the
+  the paths to Cygwin's /bin and /usr/bin directories appear BEFORE the devkitARM
+  path or will get the wrong version of make.
+
+IDEs
+====
+
+  NuttX is built using command-line make.  It can be used with an IDE, but some
+  effort will be required to create the project.
+  
+  Makefile Build
+  --------------
+  Under Eclipse, it is pretty easy to set up an "empty makefile project" and
+  simply use the NuttX makefile to build the system.  That is almost for free
+  under Linux.  Under Windows, you will need to set up the "Cygwin GCC" empty
+  makefile project in order to work with Windows (Google for "Eclipse Cygwin" -
+  there is a lot of help on the internet).
+
+  Native Build
+  ------------
+  Here are a few tips before you start that effort:
+
+  1) Select the toolchain that you will be using in your .config file
+  2) Start the NuttX build at least one time from the Cygwin command line
+     before trying to create your project.  This is necessary to create
+     certain auto-generated files and directories that will be needed.
+  3) Set up include pathes:  You will need include/, arch/arm/src/stm32,
+     arch/arm/src/common, arch/arm/src/armv7-m, and sched/.
+  4) All assembly files need to have the definition option -D __ASSEMBLY__
+     on the command line.
+
+  Startup files will probably cause you some headaches.  The NuttX startup file
+  is arch/arm/src/stm32/stm32_vectors.S.  With RIDE, I have to build NuttX
+  one time from the Cygwin command line in order to obtain the pre-built
+  startup object needed by RIDE.
+
+NuttX EABI "buildroot" Toolchain
+================================
+
+  A GNU GCC-based toolchain is assumed.  The files */setenv.sh should
+  be modified to point to the correct path to the Cortex-M3 GCC toolchain (if
+  different from the default in your PATH variable).
+
+  If you have no Cortex-M3 toolchain, one can be downloaded from the NuttX
+  SourceForge download site (https://sourceforge.net/projects/nuttx/files/buildroot/).
+  This GNU toolchain builds and executes in the Linux or Cygwin environment.
+
+  1. You must have already configured Nuttx in <some-dir>/nuttx.
+
+     cd tools
+     ./configure.sh stm32_tiny/<sub-dir>
+
+  2. Download the latest buildroot package into <some-dir>
+
+  3. unpack the buildroot tarball.  The resulting directory may
+     have versioning information on it like buildroot-x.y.z.  If so,
+     rename <some-dir>/buildroot-x.y.z to <some-dir>/buildroot.
+
+  4. cd <some-dir>/buildroot
+
+  5. cp configs/cortexm3-eabi-defconfig-4.6.3 .config
+
+  6. make oldconfig
+
+  7. make
+
+  8. Edit setenv.h, if necessary, so that the PATH variable includes
+     the path to the newly built binaries.
+
+  See the file configs/README.txt in the buildroot source tree.  That has more
+  details PLUS some special instructions that you will need to follow if you are
+  building a Cortex-M3 toolchain for Cygwin under Windows.
+
+  NOTE:  Unfortunately, the 4.6.3 EABI toolchain is not compatible with the
+  the NXFLAT tools.  See the top-level TODO file (under "Binary loaders") for
+  more information about this problem. If you plan to use NXFLAT, please do not
+  use the GCC 4.6.3 EABI toochain; instead use the GCC 4.3.3 OABI toolchain.
+  See instructions below.
+
+NuttX OABI "buildroot" Toolchain
+================================
+
+  The older, OABI buildroot toolchain is also available.  To use the OABI
+  toolchain:
+
+  1. When building the buildroot toolchain, either (1) modify the cortexm3-eabi-defconfig-4.6.3
+     configuration to use EABI (using 'make menuconfig'), or (2) use an exising OABI
+     configuration such as cortexm3-defconfig-4.3.3
+
+  2. Modify the Make.defs file to use the OABI conventions:
+
+    +CROSSDEV = arm-nuttx-elf-
+    +ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
+    +NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-gotoff.ld -no-check-sections
+    -CROSSDEV = arm-nuttx-eabi-
+    -ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
+    -NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
+
+NXFLAT Toolchain
+================
+
+  If you are *not* using the NuttX buildroot toolchain and you want to use
+  the NXFLAT tools, then you will still have to build a portion of the buildroot
+  tools -- just the NXFLAT tools.  The buildroot with the NXFLAT tools can
+  be downloaded from the NuttX SourceForge download site
+  (https://sourceforge.net/projects/nuttx/files/).
+ 
+  This GNU toolchain builds and executes in the Linux or Cygwin environment.
+
+  1. You must have already configured Nuttx in <some-dir>/nuttx.
+
+     cd tools
+     ./configure.sh lpcxpresso-lpc1768/<sub-dir>
+
+  2. Download the latest buildroot package into <some-dir>
+
+  3. unpack the buildroot tarball.  The resulting directory may
+     have versioning information on it like buildroot-x.y.z.  If so,
+     rename <some-dir>/buildroot-x.y.z to <some-dir>/buildroot.
+
+  4. cd <some-dir>/buildroot
+
+  5. cp configs/cortexm3-defconfig-nxflat .config
+
+  6. make oldconfig
+
+  7. make
+
+  8. Edit setenv.h, if necessary, so that the PATH variable includes
+     the path to the newly builtNXFLAT binaries.
+
+LEDs
+====
+
+The STM32Tiny board has only one software controllable LED.
+This LED can be used by the board port when CONFIG_ARCH_LEDS option is
+enabled. 
+
+If enabled the LED is simply turned on when the board boots
+succesfully, and is blinking on panic / assertion failed. 
+
+PWM
+===
+
+The STM32 Tiny has no real on-board PWM devices, but the board can be
+configured to output a pulse train using TIM3 CH2 on the GPIO line B.5
+(connected to the LED).
+Please note that the CONFIG_STM32_TIM3_PARTIAL_REMAP option must be enabled
+in this case.
+
+UARTs
+=====
+
+UART/USART PINS
+---------------
+
+USART1
+  RX      PA10
+  TX      PA9
+USART2
+  CK      PA4
+  CTS     PA0*
+  RTS     PA1
+  RX      PA3
+  TX      PA2
+USART3
+  CK      PB12*
+  CTS     PB13*
+  RTS     PB14*
+  RX      PB11
+  TX      PB10
+
+* theses IO lines are intended to be used by the wireless module on the board.
+
+ 
+Default USART/UART Configuration
+--------------------------------
+ 
+USART1 (RX & TX only) is available through the RS-232 port on the board. A MAX232 chip converts
+voltage to RS-232 level. This serial port can be used to flash a firmware using the boot loader 
+integrated in the MCU.
+
+
+Timer Inputs/Outputs
+====================
+
+TIM1
+  CH1     PA8
+  CH2     PA9*
+  CH3     PA10*
+  CH4     PA11*
+TIM2
+  CH1     PA0*, PA15, PA5
+  CH2     PA1, PB3
+  CH3     PA2, PB10*
+  CH4     PA3, PB11
+TIM3
+  CH1     PA6, PB4
+  CH2     PA7, PB5*
+  CH3     PB0
+  CH4     PB1*
+TIM4
+  CH1     PB6*
+  CH2     PB7
+  CH3     PB8
+  CH4     PB9*
+
+ * Indicates pins that have other on-board functions and should be used only
+   with care (See board datasheet).
+
+
+STM32 Tiny - specific Configuration Options
+===============================================
+
+    CONFIG_ARCH - Identifies the arch/ subdirectory.  This should
+       be set to:
+
+       CONFIG_ARCH=arm
+
+    CONFIG_ARCH_family - For use in C code:
+
+       CONFIG_ARCH_ARM=y
+
+    CONFIG_ARCH_architecture - For use in C code:
+
+       CONFIG_ARCH_CORTEXM3=y
+
+    CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
+
+       CONFIG_ARCH_CHIP=stm32
+
+    CONFIG_ARCH_CHIP_name - For use in C code to identify the exact
+       chip:
+
+       CONFIG_ARCH_CHIP_STM32F103C8=y
+
+    CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG - Enables special STM32 clock
+       configuration features.
+
+       CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG=n
+ 
+    CONFIG_ARCH_BOARD - Identifies the configs subdirectory and
+       hence, the board that supports the particular chip or SoC.
+
+       CONFIG_ARCH_BOARD=stm32_tiny
+
+    CONFIG_ARCH_BOARD_name - For use in C code
+
+       CONFIG_ARCH_BOARD_STM32_TINY=y
+
+    CONFIG_ARCH_LOOPSPERMSEC - Must be calibrated for correct operation
+       of delay loops
+
+    CONFIG_ENDIAN_BIG - define if big endian (default is little
+       endian)
+
+    CONFIG_DRAM_SIZE - Describes the installed DRAM (SRAM in this case):
+
+       CONFIG_DRAM_SIZE=20480 (20Kb)
+
+    CONFIG_DRAM_START - The start address of installed DRAM
+
+       CONFIG_DRAM_START=0x20000000
+
+    CONFIG_ARCH_IRQPRIO - The STM32Tiny supports interrupt prioritization
+
+       CONFIG_ARCH_IRQPRIO=y
+
+    CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to boards that
+       have LEDs
+
+    CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
+       stack. If defined, this symbol is the size of the interrupt
+        stack in bytes.  If not defined, the user task stacks will be
+      used during interrupt handling.
+
+    CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
+
+    CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
+       cause a 100 second delay during boot-up.  This 100 second delay
+       serves no purpose other than it allows you to calibratre
+       CONFIG_ARCH_LOOPSPERMSEC.  You simply use a stop watch to measure
+       the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until
+       the delay actually is 100 seconds.
+
+  Individual subsystems can be enabled:
+
+    AHB
+    ---
+    CONFIG_STM32_CRC
+    CONFIG_STM32_BKPSRAM
+
+    APB1
+    ----
+    CONFIG_STM32_TIM2
+    CONFIG_STM32_TIM3
+    CONFIG_STM32_TIM4
+    CONFIG_STM32_WWDG
+    CONFIG_STM32_IWDG
+    CONFIG_STM32_SPI2
+    CONFIG_STM32_USART2
+    CONFIG_STM32_USART3
+    CONFIG_STM32_I2C1
+    CONFIG_STM32_I2C2
+    CONFIG_STM32_CAN1
+    CONFIG_STM32_PWR -- Required for RTC
+
+    APB2
+    ----
+    CONFIG_STM32_TIM1
+    CONFIG_STM32_USART1
+    CONFIG_STM32_ADC1
+    CONFIG_STM32_ADC2
+    CONFIG_STM32_SPI1
+
+  Timer devices may be used for different purposes.  One special purpose is
+  to generate modulated outputs for such things as motor control.  If CONFIG_STM32_TIMn
+  is defined (as above) then the following may also be defined to indicate that
+  the timer is intended to be used for pulsed output modulation or ADC conversion.
+  Note that ADC require two definitions:  Not only do you have
+  to assign the timer (n) for used by the ADC, but then you also have to
+  configure which ADC (m) it is assigned to.
+
+    CONFIG_STM32_TIMn_PWM   Reserve timer n for use by PWM, n=1,..,14
+    CONFIG_STM32_TIMn_ADC   Reserve timer n for use by ADC, n=1,..,14
+    CONFIG_STM32_TIMn_ADCm  Reserve timer n to trigger ADCm, n=1,..,14, m=1,..,3
+
+  For each timer that is enabled for PWM usage, we need the following additional
+  configuration settings:
+
+    CONFIG_STM32_TIMx_CHANNEL - Specifies the timer output channel {1,..,4}
+ 
+  NOTE: The STM32 timers are each capable of generating different signals on
+  each of the four channels with different duty cycles.  That capability is
+  not supported by this driver:  Only one output channel per timer.
+
+  JTAG Enable settings (by default only SW-DP is enabled):
+
+    CONFIG_STM32_JTAG_FULL_ENABLE - Enables full SWJ (JTAG-DP + SW-DP)
+    CONFIG_STM32_JTAG_NOJNTRST_ENABLE - Enables full SWJ (JTAG-DP + SW-DP)
+      but without JNTRST.
+    CONFIG_STM32_JTAG_SW_ENABLE - Set JTAG-DP disabled and SW-DP enabled
+
+  STM32Tiny specific device driver settings
+
+    CONFIG_U[S]ARTn_SERIAL_CONSOLE - selects the USARTn (n=1,2,3)
+       for the console and ttys0 (default is the USART1).
+    CONFIG_U[S]ARTn_RXBUFSIZE - Characters are buffered as received.
+       This specific the size of the receive buffer
+    CONFIG_U[S]ARTn_TXBUFSIZE - Characters are buffered before
+       being sent.  This specific the size of the transmit buffer
+    CONFIG_U[S]ARTn_BAUD - The configure BAUD of the UART.  Must be
+    CONFIG_U[S]ARTn_BITS - The number of bits.  Must be either 7 or 8.
+    CONFIG_U[S]ARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
+    CONFIG_U[S]ARTn_2STOP - Two stop bits
+
+  STM32Tiny CAN Configuration
+
+    CONFIG_CAN - Enables CAN support (one or both of CONFIG_STM32_CAN1 or
+      CONFIG_STM32_CAN2 must also be defined)
+    CONFIG_CAN_EXTID - Enables support for the 29-bit extended ID.  Default
+      Standard 11-bit IDs.
+    CONFIG_CAN_FIFOSIZE - The size of the circular buffer of CAN messages.
+      Default: 8
+    CONFIG_CAN_NPENDINGRTR - The size of the list of pending RTR requests.
+      Default: 4
+    CONFIG_CAN_LOOPBACK - A CAN driver may or may not support a loopback
+      mode for testing. The STM32 CAN driver does support loopback mode.
+    CONFIG_CAN1_BAUD - CAN1 BAUD rate.  Required if CONFIG_STM32_CAN1 is defined.
+    CONFIG_CAN2_BAUD - CAN1 BAUD rate.  Required if CONFIG_STM32_CAN2 is defined.
+    CONFIG_CAN_TSEG1 - The number of CAN time quanta in segment 1. Default: 6
+    CONFIG_CAN_TSEG2 - the number of CAN time quanta in segment 2. Default: 7
+    CONFIG_CAN_REGDEBUG - If CONFIG_DEBUG is set, this will generate an
+      dump of all CAN registers.
+
+  STM32Tiny SPI Configuration
+
+    CONFIG_STM32_SPI_INTERRUPTS - Select to enable interrupt driven SPI
+      support. Non-interrupt-driven, poll-waiting is recommended if the
+      interrupt rate would be to high in the interrupt driven case.
+    CONFIG_STM32_SPI_DMA - Use DMA to improve SPI transfer performance.
+      Cannot be used with CONFIG_STM32_SPI_INTERRUPT.
+
+Configurations
+==============
+
+Each STM32Tiny configuration is maintained in a sub-directory and
+can be selected as follow:
+
+    cd tools
+    ./configure.sh STM32Tiny/<subdir>
+    cd -
+    . ./setenv.sh
+
+If this is a Windows native build, then configure.bat should be used
+instead of configure.sh:
+
+    configure.bat STM32Tiny\<subdir>
+
+Where <subdir> is one of the following:
+
+  nsh:
+  ---
+    Configures the NuttShell (nsh) located at apps/examples/nsh. This
+    configuration enables a console on UART1. Support for
+    builtin applications is enabled, but in the base configuration no
+    builtin applications are selected (see NOTES below).
+
+    NOTES:
+ 
+    1. This configuration uses the mconf-based configuration tool.  To
+       change this configuration using that tool, you should:
+
+       a. Build and install the kconfig-mconf tool.  See nuttx/README.txt
+          and misc/tools/
+
+       b. Execute 'make menuconfig' in nuttx/ in order to start the
+          reconfiguration process.
+
+    2. By default, this configuration uses the CodeSourcery toolchain
+       for Windows and builds under Cygwin (or probably MSYS).  That
+       can easily be reconfigured, of course.
+
+       CONFIG_HOST_WINDOWS=y                   : Builds under Windows
+       CONFIG_WINDOWS_CYGWIN=y                 : Using Cygwin
+       CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y : CodeSourcery for Windows
+
+    3. This example supports the PWM test (apps/examples/pwm) but this must
+       be manually enabled by selecting:
+
+       CONFIG_PWM=y              : Enable the generic PWM infrastructure
+       CONFIG_STM32_TIM3=y       : Enable TIM3
+       CONFIG_STM32_TIM3_PWM=y   : Use TIM3 to generate PWM output
+       CONFIG_STM32_TIM3_PARTIAL_REMAP=y  : Required to have the port B5 as timer PWM output  (channel 2)
+       CONFIG_STM32_TIM3_CHANNEL=2
+       
+       See also apps/examples/README.txt
+       
+       Note that the only supported board configuration uses the board LED as PWM output.
+
+       Special PWM-only debug options:
+
+       CONFIG_DEBUG_PWM
+
+     7. USB Support (CDC/ACM device)
+
+        CONFIG_STM32_OTGFS=y          : STM32 OTG FS support
+        CONFIG_USBDEV=y               : USB device support must be enabled
+        CONFIG_CDCACM=y               : The CDC/ACM driver must be built
+        CONFIG_NSH_BUILTIN_APPS=y     : NSH built-in application support must be enabled
+        CONFIG_NSH_ARCHINIT=y         : To perform USB initialization
+
+     8. Using the USB console.
+
+        The STM32Tiny NSH configuration can be set up to use a USB CDC/ACM
+        (or PL2303) USB console.  The normal way that you would configure the
+        the USB console would be to change the .config file like this:
+
+        CONFIG_STM32_OTGFS=y           : STM32 OTG FS support
+        CONFIG_USART2_SERIAL_CONSOLE=n : Disable the USART2 console
+        CONFIG_DEV_CONSOLE=n           : Inhibit use of /dev/console by other logic
+        CONFIG_USBDEV=y                : USB device support must be enabled
+        CONFIG_CDCACM=y                : The CDC/ACM driver must be built
+        CONFIG_CDCACM_CONSOLE=y        : Enable the CDC/ACM USB console.
+
+        NOTE: When you first start the USB console, you have hit ENTER a few
+        times before NSH starts.  The logic does this to prevent sending USB data
+        before there is anything on the host side listening for USB serial input.
+
+    9.  Here is an alternative USB console configuration.  The following
+        configuration will also create a NSH USB console but this version
+        will use /dev/console.  Instead, it will use the normal /dev/ttyACM0
+        USB serial device for the console:
+
+        CONFIG_STM32_OTGFS=y           : STM32 OTG FS support
+        CONFIG_USART2_SERIAL_CONSOLE=y : Keep the USART2 console
+        CONFIG_DEV_CONSOLE=y           : /dev/console exists (but NSH won't use it)
+        CONFIG_USBDEV=y                : USB device support must be enabled
+        CONFIG_CDCACM=y                : The CDC/ACM driver must be built
+        CONFIG_CDCACM_CONSOLE=n        : Don't use the CDC/ACM USB console.
+        CONFIG_NSH_USBCONSOLE=y        : Instead use some other USB device for the console
+
+        The particular USB device that is used is:
+
+        CONFIG_NSH_USBCONDEV="/dev/ttyACM0"
+
+        The advantage of this configuration is only that it is easier to
+        bet working.  This alternative does has some side effects:
+
+        - When any other device other than /dev/console is used for a user
+          interface, linefeeds (\n) will not be expanded to carriage return /
+          linefeeds (\r\n).  You will need to set your terminal program to account
+          for this.
+
+        - /dev/console still exists and still refers to the serial port. So
+          you can still use certain kinds of debug output (see include/debug.h, all
+          of the interfaces based on lowsyslog will work in this configuration).
+
+        - But don't enable USB debug output!  Since USB is console is used for 
+          USB debug output and you are using a USB console, there will be
+          infinite loops and deadlocks:  Debug output generates USB debug
+          output which generatates USB debug output, etc.  If you want USB
+          debug output, you should consider enabling USB trace
+          (CONFIG_USBDEV_TRACE) and perhaps the USB monitor (CONFIG_SYSTEM_USBMONITOR).
+
+          See the usbnsh configuration below for more information on configuring
+          USB trace output and the USB monitor.
+
+  usbnsh:
+  -------
+
+    This is another NSH example.  If differs from other 'nsh' configurations
+    in that this configurations uses a USB serial device for console I/O.
+    
+    NOTES:
+ 
+    1. This configuration uses the mconf-based configuration tool.  To
+       change this configuration using that tool, you should:
+
+       a. Build and install the kconfig-mconf tool.  See nuttx/README.txt
+          and misc/tools/
+
+       b. Execute 'make menuconfig' in nuttx/ in order to start the
+          reconfiguration process.
+
+    2. By default, this configuration uses the CodeSourcery toolchain
+       for Windows and builds under Cygwin (or probably MSYS).  That
+       can easily be reconfigured, of course.
+
+       CONFIG_HOST_WINDOWS=y                   : Builds under Windows
+       CONFIG_WINDOWS_CYGWIN=y                 : Using Cygwin
+       CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y : CodeSourcery for Windows
+
+    3. This configuration does have UART2 output enabled and set up as
+       the system logging device:
+
+       CONFIG_SYSLOG=y                    : Enable output to syslog, not console
+       CONFIG_SYSLOG_CHAR=y               : Use a character device for system logging
+       CONFIG_SYSLOG_DEVPATH="/dev/ttyS0" : UART2 will be /dev/ttyS0
+
+       However, there is nothing to generate SYLOG output in the default
+       configuration so nothing should appear on UART2 unless you enable
+       some debug output or enable the USB monitor.
+
+    4. Enabling USB monitor SYSLOG output.  If tracing is enabled, the USB
+       device will save encoded trace output in in-memory buffer; if the
+       USB monitor is enabled, that trace buffer will be periodically
+       emptied and dumped to the system loggin device (UART2 in this
+       configuraion):
+
+       CONFIG_USBDEV_TRACE=y                   : Enable USB trace feature
+       CONFIG_USBDEV_TRACE_NRECORDS=128        : Buffer 128 records in memory
+       CONFIG_NSH_USBDEV_TRACE=n               : No builtin tracing from NSH
+       CONFIG_NSH_ARCHINIT=y                   : Automatically start the USB monitor
+       CONFIG_SYSTEM_USBMONITOR=y              : Enable the USB monitor daemon
+       CONFIG_SYSTEM_USBMONITOR_STACKSIZE=2048 : USB monitor daemon stack size
+       CONFIG_SYSTEM_USBMONITOR_PRIORITY=50    : USB monitor daemon priority
+       CONFIG_SYSTEM_USBMONITOR_INTERVAL=2     : Dump trace data every 2 seconds
+
+       CONFIG_SYSTEM_USBMONITOR_TRACEINIT=y    : Enable TRACE output
+       CONFIG_SYSTEM_USBMONITOR_TRACECLASS=y
+       CONFIG_SYSTEM_USBMONITOR_TRACETRANSFERS=y
+       CONFIG_SYSTEM_USBMONITOR_TRACECONTROLLER=y
+       CONFIG_SYSTEM_USBMONITOR_TRACEINTERRUPTS=y
+
+    5. By default, this project assumes that you are *NOT* using the DFU
+       bootloader.
+
+    Using the Prolifics PL2303 Emulation
+    ------------------------------------
+    You could also use the non-standard PL2303 serial device instead of
+    the standard CDC/ACM serial device by changing:
+
+      CONFIG_CDCACM=y               : Disable the CDC/ACM serial device class
+      CONFIG_CDCACM_CONSOLE=y       : The CDC/ACM serial device is NOT the console
+      CONFIG_PL2303=y               : The Prolifics PL2303 emulation is enabled
+      CONFIG_PL2303_CONSOLE=y       : The PL2303 serial device is the console
diff --git a/nuttx/configs/stm32_tiny/include/board.h b/nuttx/configs/stm32_tiny/include/board.h
new file mode 100644
index 000000000..62805df3a
--- /dev/null
+++ b/nuttx/configs/stm32_tiny/include/board.h
@@ -0,0 +1,194 @@
+/************************************************************************************
+ * configs/stm32_tiny/include/board.h
+ * include/arch/board/board.h
+ *
+ *   Copyright (C) 2013 Gregory Nutt. All rights reserved.
+ *   Authors: Gregory Nutt <gnutt@nuttx.org>
+ *            Laurent Latil <laurent@latil.nom.fr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+#ifndef __ARCH_BOARD_BOARD_H
+#define __ARCH_BOARD_BOARD_H
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+#ifndef __ASSEMBLY__
+# include <stdint.h>
+#endif
+#include "stm32_rcc.h"
+#include "stm32_sdio.h"
+#include "stm32.h"
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+
+/* Clocking *************************************************************************/
+
+/* On-board crystal frequency is 8MHz (HSE) */
+
+#define STM32_BOARD_XTAL        8000000ul
+
+/* PLL source is HSE/1, PLL multipler is 9: PLL frequency is 8MHz (XTAL) x 9 = 72MHz */
+
+#define STM32_CFGR_PLLSRC       RCC_CFGR_PLLSRC
+#define STM32_CFGR_PLLXTPRE     0
+#define STM32_CFGR_PLLMUL       RCC_CFGR_PLLMUL_CLKx9
+#define STM32_PLL_FREQUENCY     (9*STM32_BOARD_XTAL)
+
+/* Use the PLL and set the SYSCLK source to be the PLL */
+
+#define STM32_SYSCLK_SW         RCC_CFGR_SW_PLL
+#define STM32_SYSCLK_SWS        RCC_CFGR_SWS_PLL
+#define STM32_SYSCLK_FREQUENCY  STM32_PLL_FREQUENCY
+
+/* AHB clock (HCLK) is SYSCLK (72MHz) */
+
+#define STM32_RCC_CFGR_HPRE     RCC_CFGR_HPRE_SYSCLK
+#define STM32_HCLK_FREQUENCY    STM32_PLL_FREQUENCY
+#define STM32_BOARD_HCLK        STM32_HCLK_FREQUENCY    /* same as above, to satisfy compiler */
+
+/* APB2 clock (PCLK2) is HCLK (72MHz) */
+
+#define STM32_RCC_CFGR_PPRE2    RCC_CFGR_PPRE2_HCLK
+#define STM32_PCLK2_FREQUENCY   STM32_HCLK_FREQUENCY
+
+/* APB2 timers 1 and 8 will receive PCLK2. */
+
+#define STM32_APB2_TIM1_CLKIN   (STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM8_CLKIN   (STM32_PCLK2_FREQUENCY)
+
+/* APB1 clock (PCLK1) is HCLK/2 (36MHz) */
+
+#define STM32_RCC_CFGR_PPRE1    RCC_CFGR_PPRE1_HCLKd2
+#define STM32_PCLK1_FREQUENCY   (STM32_HCLK_FREQUENCY/2)
+
+/* APB1 timers 2-4 will be twice PCLK1 (I presume the remaining will receive PCLK1) */
+
+#define STM32_APB1_TIM2_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM3_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM4_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM5_CLKIN   (STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM6_CLKIN   (STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM7_CLKIN   (STM32_PCLK1_FREQUENCY)
+
+/* USB divider -- Divide PLL clock by 1.5 */
+
+#define STM32_CFGR_USBPRE       0
+
+/* Timer Frequencies, if APBx is set to 1, frequency is same to APBx
+ * otherwise frequency is 2xAPBx.
+ * Note: TIM1,8 are on APB2, others on APB1 */
+
+#define STM32_TIM18_FREQUENCY   STM32_HCLK_FREQUENCY
+#define STM32_TIM27_FREQUENCY   STM32_HCLK_FREQUENCY
+
+/* SDIO dividers.  Note that slower clocking is required when DMA is disabled
+ * in order to avoid RX overrun/TX underrun errors due to delayed responses
+ * to service FIFOs in interrupt driven mode.  These values have not been
+ * tuned!!!
+ *
+ * HCLK=72MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(178+2)=400 KHz
+ */
+
+#define SDIO_INIT_CLKDIV        (178 << SDIO_CLKCR_CLKDIV_SHIFT)
+
+/* DMA ON:  HCLK=72 MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(2+2)=18 MHz
+ * DMA OFF: HCLK=72 MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(3+2)=14.4 MHz
+ */
+
+#ifdef CONFIG_SDIO_DMA
+#  define SDIO_MMCXFR_CLKDIV    (2 << SDIO_CLKCR_CLKDIV_SHIFT)
+#else
+#  define SDIO_MMCXFR_CLKDIV    (3 << SDIO_CLKCR_CLKDIV_SHIFT)
+#endif
+
+/* DMA ON:  HCLK=72 MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(1+2)=24 MHz
+ * DMA OFF: HCLK=72 MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(3+2)=14.4 MHz
+ */
+
+#ifdef CONFIG_SDIO_DMA
+#  define SDIO_SDXFR_CLKDIV     (1 << SDIO_CLKCR_CLKDIV_SHIFT)
+#else
+#  define SDIO_SDXFR_CLKDIV     (3 << SDIO_CLKCR_CLKDIV_SHIFT)
+#endif
+
+/* LED definitions ******************************************************************/
+
+/* The board has only one controllable LED */
+#define LED_STARTED       0  /* No LEDs */
+#define LED_HEAPALLOCATE  1  /* LED1 on */
+#define LED_IRQSENABLED   2  /* LED2 on */
+#define LED_STACKCREATED  3  /* LED1 on */
+#define LED_INIRQ         4  /* LED1 off */
+#define LED_SIGNAL        5  /* LED2 on */
+#define LED_ASSERTION     6  /* LED1 + LED2 */
+#define LED_PANIC         7  /* LED1 / LED2 blinking */
+
+/************************************************************************************
+ * Public Data
+ ************************************************************************************/
+
+#ifndef __ASSEMBLY__
+
+#undef EXTERN
+#if defined(__cplusplus)
+#define EXTERN extern "C"
+extern "C" {
+#else
+#define EXTERN extern
+#endif
+
+/************************************************************************************
+ * Public Function Prototypes
+ ************************************************************************************/
+/************************************************************************************
+ * Name: stm32_boardinitialize
+ *
+ * Description:
+ *   All STM32 architectures must provide the following entry point.  This entry point
+ *   is called early in the initialization -- after all memory has been configured
+ *   and mapped but before any devices have been initialized.
+ *
+ ************************************************************************************/
+
+EXTERN void stm32_boardinitialize(void);
+
+#undef EXTERN
+#if defined(__cplusplus)
+}
+#endif
+
+#endif /* __ASSEMBLY__ */
+#endif  /* __ARCH_BOARD_BOARD_H */
diff --git a/nuttx/configs/stm32_tiny/nsh/Make.defs b/nuttx/configs/stm32_tiny/nsh/Make.defs
new file mode 100644
index 000000000..66acdda25
--- /dev/null
+++ b/nuttx/configs/stm32_tiny/nsh/Make.defs
@@ -0,0 +1,111 @@
+############################################################################
+# configs/stm32_tiny/nsh/Make.defs
+#
+#   Copyright (C) 2011, 2012-2013 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+include ${TOPDIR}/.config
+include ${TOPDIR}/tools/Config.mk
+include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
+
+LDSCRIPT = ld.script
+
+ifeq ($(WINTOOL),y)
+  # Windows-native toolchains
+  DIRLINK = $(TOPDIR)/tools/copydir.sh
+  DIRUNLINK = $(TOPDIR)/tools/unlink.sh
+  MKDEP = $(TOPDIR)/tools/mknulldeps.sh
+  ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
+  ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
+  ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
+  MAXOPTIMIZATION = -O2
+else
+  # Linux/Cygwin-native toolchain 
+  MKDEP = $(TOPDIR)/tools/mkdeps.sh
+  ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
+  ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
+  ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
+endif
+
+CC = $(CROSSDEV)gcc
+CXX = $(CROSSDEV)g++
+CPP = $(CROSSDEV)gcc -E
+LD = $(CROSSDEV)ld
+AR = $(CROSSDEV)ar rcs
+NM = $(CROSSDEV)nm
+OBJCOPY = $(CROSSDEV)objcopy
+OBJDUMP = $(CROSSDEV)objdump
+
+ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
+ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
+
+ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
+  ARCHOPTIMIZATION = -g -Os
+else
+  ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
+endif
+
+ARCHCFLAGS = -fno-builtin
+ARCHCXXFLAGS = -fno-builtin -fno-exceptions
+ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
+ARCHWARNINGSXX = -Wall -Wshadow
+ARCHDEFINES =
+ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
+
+CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
+CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
+CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
+AFLAGS = $(CFLAGS) -D__ASSEMBLY__
+
+NXFLATLDFLAGS1 = -r -d -warn-common
+NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
+LDNXFLATFLAGS = -e main -s 2048
+
+OBJEXT = .o
+LIBEXT = .a
+EXEEXT =
+
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
+  LDFLAGS += -nostartfiles -nodefaultlibs
+endif
+ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
+  LDFLAGS += -g
+endif
+
+
+HOSTCC = gcc
+HOSTINCLUDES = -I.
+HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
+HOSTLDFLAGS =
+
diff --git a/nuttx/configs/stm32_tiny/nsh/defconfig b/nuttx/configs/stm32_tiny/nsh/defconfig
new file mode 100644
index 000000000..65d96f12e
--- /dev/null
+++ b/nuttx/configs/stm32_tiny/nsh/defconfig
@@ -0,0 +1,694 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Nuttx/ Configuration
+#
+CONFIG_NUTTX_NEWCONFIG=y
+
+#
+# Build Setup
+#
+# CONFIG_EXPERIMENTAL is not set
+CONFIG_HOST_LINUX=y
+# CONFIG_HOST_OSX is not set
+# CONFIG_HOST_WINDOWS is not set
+# CONFIG_HOST_OTHER is not set
+
+#
+# Build Configuration
+#
+# CONFIG_APPS_DIR="../apps"
+# CONFIG_BUILD_2PASS is not set
+
+#
+# Binary Output Formats
+#
+# CONFIG_RRLOAD_BINARY is not set
+# CONFIG_INTELHEX_BINARY is not set
+# CONFIG_MOTOROLA_SREC is not set
+CONFIG_RAW_BINARY=y
+
+#
+# Customize Header Files
+#
+# CONFIG_ARCH_STDBOOL_H is not set
+# CONFIG_ARCH_MATH_H is not set
+# CONFIG_ARCH_FLOAT_H is not set
+# CONFIG_ARCH_STDARG_H is not set
+
+#
+# Debug Options
+#
+# CONFIG_DEBUG is not set
+# CONFIG_DEBUG_SYMBOLS is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_8051 is not set
+CONFIG_ARCH_ARM=y
+# CONFIG_ARCH_AVR is not set
+# CONFIG_ARCH_HC is not set
+# CONFIG_ARCH_MIPS is not set
+# CONFIG_ARCH_RGMP is not set
+# CONFIG_ARCH_SH is not set
+# CONFIG_ARCH_SIM is not set
+# CONFIG_ARCH_X86 is not set
+# CONFIG_ARCH_Z16 is not set
+# CONFIG_ARCH_Z80 is not set
+CONFIG_ARCH="arm"
+
+#
+# ARM Options
+#
+# CONFIG_ARCH_CHIP_C5471 is not set
+# CONFIG_ARCH_CHIP_CALYPSO is not set
+# CONFIG_ARCH_CHIP_DM320 is not set
+# CONFIG_ARCH_CHIP_IMX is not set
+# CONFIG_ARCH_CHIP_KINETIS is not set
+# CONFIG_ARCH_CHIP_KL is not set
+# CONFIG_ARCH_CHIP_LM is not set
+# CONFIG_ARCH_CHIP_LPC17XX is not set
+# CONFIG_ARCH_CHIP_LPC214X is not set
+# CONFIG_ARCH_CHIP_LPC2378 is not set
+# CONFIG_ARCH_CHIP_LPC31XX is not set
+# CONFIG_ARCH_CHIP_LPC43XX is not set
+# CONFIG_ARCH_CHIP_NUC1XX is not set
+# CONFIG_ARCH_CHIP_SAM3U is not set
+CONFIG_ARCH_CHIP_STM32=y
+# CONFIG_ARCH_CHIP_STR71X is not set
+CONFIG_ARCH_CORTEXM3=y
+CONFIG_ARCH_FAMILY="armv7-m"
+CONFIG_ARCH_CHIP="stm32"
+# CONFIG_ARMV7M_USEBASEPRI is not set
+CONFIG_ARCH_HAVE_CMNVECTOR=y
+# CONFIG_ARMV7M_CMNVECTOR is not set
+CONFIG_ARCH_HAVE_MPU=y
+# CONFIG_ARMV7M_MPU is not set
+
+#
+# ARMV7M Configuration Options
+#
+# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set
+# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
+# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
+CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI=y
+# CONFIG_SERIAL_TERMIOS is not set
+
+#
+# STM32 Configuration Options
+#
+# CONFIG_ARCH_CHIP_STM32F100C8 is not set
+# CONFIG_ARCH_CHIP_STM32F100CB is not set
+# CONFIG_ARCH_CHIP_STM32F100R8 is not set
+# CONFIG_ARCH_CHIP_STM32F100RB is not set
+# CONFIG_ARCH_CHIP_STM32F100RC is not set
+# CONFIG_ARCH_CHIP_STM32F100RD is not set
+# CONFIG_ARCH_CHIP_STM32F100RE is not set
+# CONFIG_ARCH_CHIP_STM32F100V8 is not set
+# CONFIG_ARCH_CHIP_STM32F100VB is not set
+# CONFIG_ARCH_CHIP_STM32F100VC is not set
+# CONFIG_ARCH_CHIP_STM32F100VD is not set
+# CONFIG_ARCH_CHIP_STM32F100VE is not set
+CONFIG_ARCH_CHIP_STM32F103C8=y
+# CONFIG_ARCH_CHIP_STM32F103C4 is not set
+# CONFIG_ARCH_CHIP_STM32F103RET6 is not set
+# CONFIG_ARCH_CHIP_STM32F103VCT6 is not set
+# CONFIG_ARCH_CHIP_STM32F103VET6 is not set
+# CONFIG_ARCH_CHIP_STM32F103ZET6 is not set
+# CONFIG_ARCH_CHIP_STM32F105VBT7 is not set
+# CONFIG_ARCH_CHIP_STM32F107VC is not set
+# CONFIG_ARCH_CHIP_STM32F207IG is not set
+# CONFIG_ARCH_CHIP_STM32F302CB is not set
+# CONFIG_ARCH_CHIP_STM32F302CC is not set
+# CONFIG_ARCH_CHIP_STM32F302RB is not set
+# CONFIG_ARCH_CHIP_STM32F302RC is not set
+# CONFIG_ARCH_CHIP_STM32F302VB is not set
+# CONFIG_ARCH_CHIP_STM32F302VC is not set
+# CONFIG_ARCH_CHIP_STM32F303CB is not set
+# CONFIG_ARCH_CHIP_STM32F303CC is not set
+# CONFIG_ARCH_CHIP_STM32F303RB is not set
+# CONFIG_ARCH_CHIP_STM32F303RC is not set
+# CONFIG_ARCH_CHIP_STM32F303VB is not set
+# CONFIG_ARCH_CHIP_STM32F303VC is not set
+# CONFIG_ARCH_CHIP_STM32F405RG is not set
+# CONFIG_ARCH_CHIP_STM32F405VG is not set
+# CONFIG_ARCH_CHIP_STM32F405ZG is not set
+# CONFIG_ARCH_CHIP_STM32F407VE is not set
+# CONFIG_ARCH_CHIP_STM32F407VG is not set
+# CONFIG_ARCH_CHIP_STM32F407ZE is not set
+# CONFIG_ARCH_CHIP_STM32F407ZG is not set
+# CONFIG_ARCH_CHIP_STM32F407IE is not set
+# CONFIG_ARCH_CHIP_STM32F407IG is not set
+# CONFIG_ARCH_CHIP_STM32F427V is not set
+# CONFIG_ARCH_CHIP_STM32F427Z is not set
+# CONFIG_ARCH_CHIP_STM32F427I is not set
+CONFIG_STM32_STM32F10XX=y
+CONFIG_STM32_PERFORMANCELINE=y
+CONFIG_STM32_MEDIUMDENSITY=y
+# CONFIG_STM32_DFU is not set
+
+#
+# STM32 Peripheral Support
+#
+# CONFIG_STM32_ADC1 is not set
+# CONFIG_STM32_ADC2 is not set
+# CONFIG_STM32_ADC3 is not set
+# CONFIG_STM32_BKP is not set
+# CONFIG_STM32_CAN1 is not set
+# CONFIG_STM32_CRC is not set
+# CONFIG_STM32_DMA1 is not set
+# CONFIG_STM32_DMA2 is not set
+# CONFIG_STM32_DAC1 is not set
+# CONFIG_STM32_DAC2 is not set
+# CONFIG_STM32_I2C1 is not set
+# CONFIG_STM32_I2C2 is not set
+# CONFIG_STM32_IWDG is not set
+# CONFIG_STM32_PWR is not set
+# CONFIG_STM32_SDIO is not set
+# CONFIG_STM32_SPI1 is not set
+# CONFIG_STM32_SPI2 is not set
+# CONFIG_STM32_TIM1 is not set
+# CONFIG_STM32_TIM2 is not set
+# CONFIG_STM32_TIM3 is not set
+# CONFIG_STM32_TIM4 is not set
+# CONFIG_STM32_TIM5 is not set
+# CONFIG_STM32_TIM6 is not set
+# CONFIG_STM32_TIM7 is not set
+# CONFIG_STM32_TIM8 is not set
+CONFIG_STM32_USART1=y
+# CONFIG_STM32_USART2 is not set
+# CONFIG_STM32_USART3 is not set
+# CONFIG_STM32_UART4 is not set
+# CONFIG_STM32_UART5 is not set
+# CONFIG_STM32_USB is not set
+# CONFIG_STM32_WWDG is not set
+
+#
+# Alternate Pin Mapping
+#
+# CONFIG_STM32_TIM3_NO_REMAP is not set
+# CONFIG_STM32_TIM3_FULL_REMAP is not set
+# CONFIG_STM32_TIM3_PARTIAL_REMAP is not set
+# CONFIG_STM32_USART1_REMAP is not set
+# CONFIG_STM32_JTAG_DISABLE is not set
+CONFIG_STM32_JTAG_FULL_ENABLE=y
+# CONFIG_STM32_JTAG_NOJNTRST_ENABLE is not set
+# CONFIG_STM32_JTAG_SW_ENABLE is not set
+# CONFIG_STM32_FORCEPOWER is not set
+# CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG is not set
+CONFIG_STM32_USART=y
+
+#
+# U[S]ART Configuration
+#
+# CONFIG_USART1_RS485 is not set
+# CONFIG_STM32_USART_SINGLEWIRE is not set
+
+#
+# USB Host Configuration
+#
+
+#
+# USB Device Configuration
+#
+
+#
+# External Memory Configuration
+#
+
+#
+# Architecture Options
+#
+# CONFIG_ARCH_NOINTC is not set
+# CONFIG_ARCH_VECNOTIRQ is not set
+# CONFIG_ARCH_DMA is not set
+CONFIG_ARCH_IRQPRIO=y
+# CONFIG_CUSTOM_STACK is not set
+# CONFIG_ADDRENV is not set
+CONFIG_ARCH_HAVE_VFORK=y
+CONFIG_ARCH_STACKDUMP=y
+# CONFIG_ENDIAN_BIG is not set
+# CONFIG_ARCH_HAVE_RAMFUNCS is not set
+CONFIG_ARCH_HAVE_RAMVECTORS=y
+# CONFIG_ARCH_RAMVECTORS is not set
+
+#
+# Board Settings
+#
+CONFIG_BOARD_LOOPSPERMSEC=5483
+# CONFIG_ARCH_CALIBRATION is not set
+CONFIG_DRAM_START=0x20000000
+CONFIG_DRAM_SIZE=20480
+CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
+CONFIG_ARCH_INTERRUPTSTACK=0
+
+#
+# Boot options
+#
+# CONFIG_BOOT_RUNFROMEXTSRAM is not set
+CONFIG_BOOT_RUNFROMFLASH=y
+# CONFIG_BOOT_RUNFROMISRAM is not set
+# CONFIG_BOOT_RUNFROMSDRAM is not set
+# CONFIG_BOOT_COPYTORAM is not set
+
+#
+# Board Selection
+#
+CONFIG_ARCH_BOARD_STM32_TINY=y
+# CONFIG_ARCH_BOARD_CUSTOM is not set
+CONFIG_ARCH_BOARD="stm32_tiny"
+
+#
+# Common Board Options
+#
+CONFIG_ARCH_HAVE_LEDS=y
+CONFIG_ARCH_LEDS=y
+CONFIG_NSH_MMCSDMINOR=0
+
+#
+# Board-Specific Options
+#
+
+#
+# RTOS Features
+#
+# CONFIG_BOARD_INITIALIZE is not set
+CONFIG_MSEC_PER_TICK=10
+CONFIG_RR_INTERVAL=200
+# CONFIG_SCHED_INSTRUMENTATION is not set
+CONFIG_TASK_NAME_SIZE=0
+# CONFIG_SCHED_HAVE_PARENT is not set
+# CONFIG_JULIAN_TIME is not set
+CONFIG_START_YEAR=2011
+CONFIG_START_MONTH=7
+CONFIG_START_DAY=5
+CONFIG_DEV_CONSOLE=y
+# CONFIG_MUTEX_TYPES is not set
+# CONFIG_PRIORITY_INHERITANCE is not set
+# CONFIG_FDCLONE_DISABLE is not set
+# CONFIG_FDCLONE_STDIO is not set
+CONFIG_SDCLONE_DISABLE=y
+CONFIG_SCHED_WAITPID=y
+# CONFIG_SCHED_STARTHOOK is not set
+# CONFIG_SCHED_ATEXIT is not set
+# CONFIG_SCHED_ONEXIT is not set
+CONFIG_USER_ENTRYPOINT="nsh_main"
+CONFIG_DISABLE_OS_API=y
+# CONFIG_DISABLE_CLOCK is not set
+# CONFIG_DISABLE_POSIX_TIMERS is not set
+# CONFIG_DISABLE_PTHREAD is not set
+# CONFIG_DISABLE_SIGNALS is not set
+# CONFIG_DISABLE_MQUEUE is not set
+# CONFIG_DISABLE_ENVIRON is not set
+
+#
+# Signal Numbers
+#
+CONFIG_SIG_SIGUSR1=1
+CONFIG_SIG_SIGUSR2=2
+CONFIG_SIG_SIGALARM=3
+CONFIG_SIG_SIGCONDTIMEDOUT=16
+
+#
+# Sizes of configurable things (0 disables)
+#
+CONFIG_MAX_TASKS=16
+CONFIG_MAX_TASK_ARGS=4
+CONFIG_NPTHREAD_KEYS=4
+CONFIG_NFILE_DESCRIPTORS=8
+CONFIG_NFILE_STREAMS=8
+CONFIG_NAME_MAX=32
+CONFIG_PREALLOC_MQ_MSGS=4
+CONFIG_MQ_MAXMSGSIZE=32
+CONFIG_MAX_WDOGPARMS=2
+CONFIG_PREALLOC_WDOGS=4
+CONFIG_PREALLOC_TIMERS=4
+
+#
+# Stack and heap information
+#
+CONFIG_IDLETHREAD_STACKSIZE=1024
+CONFIG_USERMAIN_STACKSIZE=2048
+CONFIG_PTHREAD_STACK_MIN=256
+CONFIG_PTHREAD_STACK_DEFAULT=2048
+
+#
+# Device Drivers
+#
+CONFIG_DISABLE_POLL=y
+CONFIG_DEV_NULL=y
+# CONFIG_DEV_ZERO is not set
+# CONFIG_LOOP is not set
+# CONFIG_RAMDISK is not set
+# CONFIG_CAN is not set
+# CONFIG_PWM is not set
+# CONFIG_I2C is not set
+CONFIG_ARCH_HAVE_I2CRESET=y
+# CONFIG_SPI is not set
+# CONFIG_RTC is not set
+# CONFIG_WATCHDOG is not set
+# CONFIG_ANALOG is not set
+# CONFIG_BCH is not set
+# CONFIG_INPUT is not set
+# CONFIG_LCD is not set
+# CONFIG_MMCSD is not set
+# CONFIG_MTD is not set
+# CONFIG_PIPES is not set
+# CONFIG_PM is not set
+# CONFIG_POWER is not set
+# CONFIG_SENSORS is not set
+# CONFIG_SERCOMM_CONSOLE is not set
+CONFIG_SERIAL=y
+# CONFIG_DEV_LOWCONSOLE is not set
+# CONFIG_16550_UART is not set
+CONFIG_ARCH_HAVE_USART1=y
+CONFIG_MCU_SERIAL=y
+CONFIG_STANDARD_SERIAL=y
+CONFIG_USART1_SERIAL_CONSOLE=y
+# CONFIG_NO_SERIAL_CONSOLE is not set
+
+#
+# USART1 Configuration
+#
+CONFIG_USART1_RXBUFSIZE=256
+CONFIG_USART1_TXBUFSIZE=256
+CONFIG_USART1_BAUD=115200
+CONFIG_USART1_BITS=8
+CONFIG_USART1_PARITY=0
+CONFIG_USART1_2STOP=0
+# CONFIG_USBDEV is not set
+# CONFIG_USBHOST is not set
+# CONFIG_WIRELESS is not set
+
+#
+# System Logging Device Options
+#
+
+#
+# System Logging
+#
+# CONFIG_RAMLOG is not set
+
+#
+# Networking Support
+#
+# CONFIG_NET is not set
+
+#
+# File Systems
+#
+
+#
+# File system configuration
+#
+# CONFIG_DISABLE_MOUNTPOINT is not set
+# CONFIG_FS_RAMMAP is not set
+# CONFIG_FS_FAT is not set
+# CONFIG_FS_NXFFS is not set
+# CONFIG_FS_ROMFS is not set
+# CONFIG_FS_BINFS is not set
+
+#
+# System Logging
+#
+# CONFIG_SYSLOG_ENABLE is not set
+# CONFIG_SYSLOG is not set
+
+#
+# Graphics Support
+#
+# CONFIG_NX is not set
+
+#
+# Memory Management
+#
+# CONFIG_MM_MULTIHEAP is not set
+# CONFIG_MM_SMALL is not set
+CONFIG_MM_REGIONS=1
+# CONFIG_GRAN is not set
+
+#
+# Binary Formats
+#
+# CONFIG_BINFMT_DISABLE is not set
+# CONFIG_BINFMT_EXEPATH is not set
+# CONFIG_NXFLAT is not set
+# CONFIG_ELF is not set
+CONFIG_BUILTIN=y
+# CONFIG_PIC is not set
+CONFIG_SYMTAB_ORDEREDBYNAME=y
+
+#
+# Library Routines
+#
+
+#
+# Standard C Library Options
+#
+CONFIG_STDIO_BUFFER_SIZE=64
+CONFIG_STDIO_LINEBUFFER=y
+CONFIG_NUNGET_CHARS=2
+CONFIG_LIB_HOMEDIR="/"
+# CONFIG_LIBM is not set
+# CONFIG_NOPRINTF_FIELDWIDTH is not set
+# CONFIG_LIBC_FLOATINGPOINT is not set
+# CONFIG_EOL_IS_CR is not set
+# CONFIG_EOL_IS_LF is not set
+# CONFIG_EOL_IS_BOTH_CRLF is not set
+CONFIG_EOL_IS_EITHER_CRLF=y
+# CONFIG_LIBC_EXECFUNCS is not set
+CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
+CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
+# CONFIG_LIBC_STRERROR is not set
+# CONFIG_LIBC_PERROR_STDOUT is not set
+CONFIG_ARCH_LOWPUTC=y
+CONFIG_LIB_SENDFILE_BUFSIZE=512
+# CONFIG_ARCH_ROMGETC is not set
+# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
+
+#
+# Non-standard Library Support
+#
+# CONFIG_SCHED_WORKQUEUE is not set
+# CONFIG_LIB_KBDCODEC is not set
+
+#
+# Basic CXX Support
+#
+# CONFIG_C99_BOOL8 is not set
+# CONFIG_HAVE_CXX is not set
+
+#
+# Application Configuration
+#
+
+#
+# Built-In Applications
+#
+CONFIG_BUILTIN_PROXY_STACKSIZE=1024
+
+#
+# Examples
+#
+# CONFIG_EXAMPLES_BUTTONS is not set
+# CONFIG_EXAMPLES_CAN is not set
+# CONFIG_EXAMPLES_COMPOSITE is not set
+# CONFIG_EXAMPLES_DHCPD is not set
+# CONFIG_EXAMPLES_ELF is not set
+# CONFIG_EXAMPLES_FTPC is not set
+# CONFIG_EXAMPLES_FTPD is not set
+# CONFIG_EXAMPLES_HELLO is not set
+# CONFIG_EXAMPLES_HELLOXX is not set
+# CONFIG_EXAMPLES_JSON is not set
+# CONFIG_EXAMPLES_HIDKBD is not set
+# CONFIG_EXAMPLES_KEYPADTEST is not set
+# CONFIG_EXAMPLES_IGMP is not set
+# CONFIG_EXAMPLES_LCDRW is not set
+# CONFIG_EXAMPLES_MM is not set
+# CONFIG_EXAMPLES_MOUNT is not set
+# CONFIG_EXAMPLES_MODBUS is not set
+CONFIG_EXAMPLES_NSH=y
+# CONFIG_EXAMPLES_NULL is not set
+# CONFIG_EXAMPLES_NX is not set
+# CONFIG_EXAMPLES_NXCONSOLE is not set
+# CONFIG_EXAMPLES_NXFFS is not set
+# CONFIG_EXAMPLES_NXFLAT is not set
+# CONFIG_EXAMPLES_NXHELLO is not set
+# CONFIG_EXAMPLES_NXIMAGE is not set
+# CONFIG_EXAMPLES_NXLINES is not set
+# CONFIG_EXAMPLES_NXTEXT is not set
+# CONFIG_EXAMPLES_OSTEST is not set
+# CONFIG_EXAMPLES_PASHELLO is not set
+# CONFIG_EXAMPLES_PIPE is not set
+# CONFIG_EXAMPLES_POSIXSPAWN is not set
+# CONFIG_EXAMPLES_QENCODER is not set
+# CONFIG_EXAMPLES_RGMP is not set
+# CONFIG_EXAMPLES_ROMFS is not set
+# CONFIG_EXAMPLES_SENDMAIL is not set
+# CONFIG_EXAMPLES_SERLOOP is not set
+# CONFIG_EXAMPLES_TELNETD is not set
+# CONFIG_EXAMPLES_THTTPD is not set
+# CONFIG_EXAMPLES_TIFF is not set
+# CONFIG_EXAMPLES_TOUCHSCREEN is not set
+# CONFIG_EXAMPLES_UDP is not set
+# CONFIG_EXAMPLES_UIP is not set
+# CONFIG_EXAMPLES_USBSERIAL is not set
+# CONFIG_EXAMPLES_USBMSC is not set
+# CONFIG_EXAMPLES_USBTERM is not set
+# CONFIG_EXAMPLES_WATCHDOG is not set
+
+#
+# Graphics Support
+#
+# CONFIG_TIFF is not set
+
+#
+# Interpreters
+#
+# CONFIG_INTERPRETERS_FICL is not set
+# CONFIG_INTERPRETERS_PCODE is not set
+
+#
+# Network Utilities
+#
+
+#
+# Networking Utilities
+#
+# CONFIG_NETUTILS_CODECS is not set
+# CONFIG_NETUTILS_DHCPC is not set
+# CONFIG_NETUTILS_DHCPD is not set
+# CONFIG_NETUTILS_FTPC is not set
+# CONFIG_NETUTILS_FTPD is not set
+# CONFIG_NETUTILS_JSON is not set
+# CONFIG_NETUTILS_RESOLV is not set
+# CONFIG_NETUTILS_SMTP is not set
+# CONFIG_NETUTILS_TELNETD is not set
+# CONFIG_NETUTILS_TFTPC is not set
+# CONFIG_NETUTILS_THTTPD is not set
+# CONFIG_NETUTILS_UIPLIB is not set
+# CONFIG_NETUTILS_WEBCLIENT is not set
+
+#
+# FreeModBus
+#
+# CONFIG_MODBUS is not set
+
+#
+# NSH Library
+#
+CONFIG_NSH_LIBRARY=y
+CONFIG_NSH_BUILTIN_APPS=y
+
+#
+# Disable Individual commands
+#
+# CONFIG_NSH_DISABLE_CAT is not set
+# CONFIG_NSH_DISABLE_CD is not set
+# CONFIG_NSH_DISABLE_CP is not set
+# CONFIG_NSH_DISABLE_DD is not set
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_EXEC is not set
+# CONFIG_NSH_DISABLE_EXIT is not set
+# CONFIG_NSH_DISABLE_FREE is not set
+# CONFIG_NSH_DISABLE_GET is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_HEXDUMP is not set
+CONFIG_NSH_DISABLE_IFCONFIG=y
+# CONFIG_NSH_DISABLE_KILL is not set
+CONFIG_NSH_DISABLE_LOSETUP=y
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MB is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
+# CONFIG_NSH_DISABLE_MKFATFS is not set
+# CONFIG_NSH_DISABLE_MKFIFO is not set
+# CONFIG_NSH_DISABLE_MKRD is not set
+# CONFIG_NSH_DISABLE_MH is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MW is not set
+# CONFIG_NSH_DISABLE_NSFMOUNT is not set
+# CONFIG_NSH_DISABLE_PS is not set
+# CONFIG_NSH_DISABLE_PING is not set
+# CONFIG_NSH_DISABLE_PUT is not set
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_RM is not set
+# CONFIG_NSH_DISABLE_RMDIR is not set
+# CONFIG_NSH_DISABLE_SET is not set
+# CONFIG_NSH_DISABLE_SH is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_TEST is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
+# CONFIG_NSH_DISABLE_WGET is not set
+# CONFIG_NSH_DISABLE_XD is not set
+CONFIG_NSH_CODECS_BUFSIZE=128
+CONFIG_NSH_FILEIOSIZE=1024
+CONFIG_NSH_LINELEN=80
+CONFIG_NSH_NESTDEPTH=3
+# CONFIG_NSH_DISABLESCRIPT is not set
+CONFIG_NSH_DISABLEBG=y
+CONFIG_NSH_CONSOLE=y
+
+#
+# USB Trace Support
+#
+# CONFIG_NSH_CONDEV is not set
+# CONFIG_NSH_ARCHINIT is not set
+
+#
+# NxWidgets/NxWM
+#
+
+#
+# System NSH Add-Ons
+#
+
+#
+# Custom Free Memory Command
+#
+# CONFIG_SYSTEM_FREE is not set
+
+#
+# I2C tool
+#
+
+#
+# FLASH Program Installation
+#
+# CONFIG_SYSTEM_INSTALL is not set
+
+#
+# RAM Test
+#
+# CONFIG_SYSTEM_RAMTEST is not set
+
+#
+# readline()
+#
+CONFIG_SYSTEM_READLINE=y
+CONFIG_READLINE_ECHO=y
+
+#
+# Power Off
+#
+# CONFIG_SYSTEM_POWEROFF is not set
+
+#
+# RAMTRON
+#
+# CONFIG_SYSTEM_RAMTRON is not set
+
+#
+# SD Card
+#
+# CONFIG_SYSTEM_SDCARD is not set
+
+#
+# Sysinfo
+#
+# CONFIG_SYSTEM_SYSINFO is not set
+
+#
+# USB Monitor
+#
diff --git a/nuttx/configs/stm32_tiny/nsh/setenv.sh b/nuttx/configs/stm32_tiny/nsh/setenv.sh
new file mode 100755
index 000000000..6a07a63ef
--- /dev/null
+++ b/nuttx/configs/stm32_tiny/nsh/setenv.sh
@@ -0,0 +1,47 @@
+#!/bin/bash
+# configs/stm32_tiny/nsh/setenv.sh
+#
+#   Copyright (C) 2011, 2013 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+
+if [ "$(basename $0)" = "setenv.sh" ] ; then
+  echo "You must source this script, not run it!" 1>&2
+  exit 1
+fi
+
+if [ -z "${PATH_ORIG}" ]; then export PATH_ORIG="${PATH}"; fi
+
+WD=`pwd`
+export RIDE_BIN="/cygdrive/c/Program Files/Raisonance/Ride/arm-gcc/bin"
+export BUILDROOT_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
+export PATH="${BUILDROOT_BIN}:${RIDE_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
+
+echo "PATH : ${PATH}"
diff --git a/nuttx/configs/stm32_tiny/scripts/ld.script b/nuttx/configs/stm32_tiny/scripts/ld.script
new file mode 100644
index 000000000..c4ab5ea33
--- /dev/null
+++ b/nuttx/configs/stm32_tiny/scripts/ld.script
@@ -0,0 +1,119 @@
+/****************************************************************************
+ * configs/stm32_tiny/scripts/ld.script
+ *
+ *   Copyright (C) 2011-2013 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *           Laurent Latil <laurent@latil.nom.fr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/* The STM32F103C8T6 has 64Kb of FLASH beginning at address 0x0800:0000 and
+ * 20Kb of SRAM beginning at address 0x2000:0000.  When booting from FLASH,
+ * FLASH memory is aliased to address 0x0000:0000 where the code expects to
+ * begin execution by jumping to the entry point in the 0x0800:0000 address
+ * range.
+ */
+
+MEMORY
+{
+    flash (rx) : ORIGIN = 0x08000000, LENGTH = 64K
+    sram (rwx) : ORIGIN = 0x20000000, LENGTH = 20K
+}
+
+OUTPUT_ARCH(arm)
+ENTRY(_stext)
+SECTIONS
+{
+	.text : {
+		_stext = ABSOLUTE(.);
+		*(.vectors)
+		*(.text .text.*)
+		*(.fixup)
+		*(.gnu.warning)
+		*(.rodata .rodata.*)
+		*(.gnu.linkonce.t.*)
+		*(.glue_7)
+		*(.glue_7t)
+		*(.got)
+		*(.gcc_except_table)
+		*(.gnu.linkonce.r.*)
+		_etext = ABSOLUTE(.);
+	} > flash
+
+	.init_section : {
+		_sinit = ABSOLUTE(.);
+		*(.init_array .init_array.*)
+		_einit = ABSOLUTE(.);
+	} > flash
+
+	.ARM.extab : {
+		*(.ARM.extab*)
+	} > flash
+
+	__exidx_start = ABSOLUTE(.);
+	.ARM.exidx : {
+		*(.ARM.exidx*)
+	} > flash
+	__exidx_end = ABSOLUTE(.);
+
+	_eronly = ABSOLUTE(.);
+
+	/* The STM32F103C8T6 has 20Kb of SRAM beginning at the following address */
+
+	.data : {
+		_sdata = ABSOLUTE(.);
+		*(.data .data.*)
+		*(.gnu.linkonce.d.*)
+		CONSTRUCTORS
+		_edata = ABSOLUTE(.);
+	} > sram AT > flash
+
+	.bss : {
+		_sbss = ABSOLUTE(.);
+		*(.bss .bss.*)
+		*(.gnu.linkonce.b.*)
+		*(COMMON)
+		_ebss = ABSOLUTE(.);
+	} > sram
+
+	/* Stabs debugging sections. */
+	.stab 0 : { *(.stab) }
+	.stabstr 0 : { *(.stabstr) }
+	.stab.excl 0 : { *(.stab.excl) }
+	.stab.exclstr 0 : { *(.stab.exclstr) }
+	.stab.index 0 : { *(.stab.index) }
+	.stab.indexstr 0 : { *(.stab.indexstr) }
+	.comment 0 : { *(.comment) }
+	.debug_abbrev 0 : { *(.debug_abbrev) }
+	.debug_info 0 : { *(.debug_info) }
+	.debug_line 0 : { *(.debug_line) }
+	.debug_pubnames 0 : { *(.debug_pubnames) }
+	.debug_aranges 0 : { *(.debug_aranges) }
+}
diff --git a/nuttx/configs/stm32_tiny/src/Makefile b/nuttx/configs/stm32_tiny/src/Makefile
new file mode 100644
index 000000000..491d345d5
--- /dev/null
+++ b/nuttx/configs/stm32_tiny/src/Makefile
@@ -0,0 +1,101 @@
+############################################################################
+# configs/stm32_tiny/src/Makefile
+#
+#   Copyright (C) 2009-2013 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#           Laurent Latil <laurent@latil.nom.fr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+-include $(TOPDIR)/Make.defs
+
+CFLAGS		+= -I$(TOPDIR)/sched
+
+ASRCS		= 
+AOBJS		= $(ASRCS:.S=$(OBJEXT))
+
+CSRCS		= up_boot.c up_leds.c up_spi.c up_usbdev.c
+
+ifeq ($(CONFIG_PWM),y)
+CSRCS		+= up_pwm.c
+endif
+
+ifeq ($(CONFIG_WL_NRF24L01),y)
+CSRCS		+= up_wireless.c
+endif
+
+ifeq ($(CONFIG_NSH_ARCHINIT),y)
+CSRCS		+= up_nsh.c
+endif
+
+ifeq ($(CONFIG_WATCHDOG),y)
+CSRCS		+= up_watchdog.c
+endif
+
+COBJS		= $(CSRCS:.c=$(OBJEXT))
+
+SRCS		= $(ASRCS) $(CSRCS)
+OBJS		= $(AOBJS) $(COBJS)
+
+ARCH_SRCDIR	= $(TOPDIR)/arch/$(CONFIG_ARCH)/src
+ifeq ($(WINTOOL),y)
+  CFLAGS	+= -I "${shell cygpath -w $(ARCH_SRCDIR)/chip}" \
+  		   -I "${shell cygpath -w $(ARCH_SRCDIR)/common}" \
+  		   -I "${shell cygpath -w $(ARCH_SRCDIR)/armv7-m}"
+else
+  CFLAGS	+= -I$(ARCH_SRCDIR)/chip -I$(ARCH_SRCDIR)/common -I$(ARCH_SRCDIR)/armv7-m
+endif
+
+all: libboard$(LIBEXT)
+
+$(AOBJS): %$(OBJEXT): %.S
+	$(call ASSEMBLE, $<, $@)
+
+$(COBJS) $(LINKOBJS): %$(OBJEXT): %.c
+	$(call COMPILE, $<, $@)
+
+libboard$(LIBEXT): $(OBJS)
+	$(call ARCHIVE, $@, $(OBJS))
+
+.depend: Makefile $(SRCS)
+	$(Q) $(MKDEP) $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep
+	$(Q) touch $@
+
+depend: .depend
+
+clean:
+	$(call DELFILE, libboard$(LIBEXT))
+	$(call CLEAN)
+
+distclean: clean
+	$(call DELFILE, Make.dep)
+	$(call DELFILE, .depend)
+
+-include Make.dep
diff --git a/nuttx/configs/stm32_tiny/src/stm32_tiny-internal.h b/nuttx/configs/stm32_tiny/src/stm32_tiny-internal.h
new file mode 100644
index 000000000..487857df5
--- /dev/null
+++ b/nuttx/configs/stm32_tiny/src/stm32_tiny-internal.h
@@ -0,0 +1,148 @@
+/************************************************************************************
+ * configs/stm32_tiny/src/stm32_tiny-internal.h
+ *
+ *   Copyright (C) 2013 Gregory Nutt. All rights reserved.
+ *   Author: Laurent Latil <laurent@latil.nom.fr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+#ifndef __CONFIGS_STM32_TINY_INTERNAL_H
+#define __CONFIGS_STM32_TINY_INTERNAL_H
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+#include <nuttx/compiler.h>
+#include <stdint.h>
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+
+/* How many SPI modules does this chip support? The LM3S6918 supports 2 SPI
+ * modules (others may support more -- in such case, the following must be
+ * expanded).
+ */
+
+#if STM32_NSPI < 1
+#  undef CONFIG_STM32_SPI1
+#  undef CONFIG_STM32_SPI2
+#elif STM32_NSPI < 2
+#  undef CONFIG_STM32_SPI2
+#endif
+
+/* GPIOs **************************************************************/
+/* LEDs */
+
+#define GPIO_LED        (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|\
+                         GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN5)
+
+/* USB Soft Connect Pullup: PC.13 */
+
+#define GPIO_USB_PULLUP (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|\
+                         GPIO_OUTPUT_SET|GPIO_PORTC|GPIO_PIN13)
+
+/* NRF24L01 chip select:  PB.12 */
+
+#define GPIO_NRF24L01_CS   (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|\
+                         GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN12)
+
+/* NRF24L01 chip enable:  PB.1 */
+
+#define GPIO_NRF24L01_CE   (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|\
+                         GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN1)
+
+/* NRF24L01 IRQ line:  PA.0 */
+
+#define GPIO_NRF24L01_IRQ  (GPIO_INPUT|GPIO_CNF_INFLOAT|GPIO_PORTA|GPIO_PIN0)
+
+/* PWM
+ *
+ * Let's use the LED.  It is connected to PB.5, which can be used as PWM output of channel 2 of timer 3
+ * (STM32_TIM3_PARTIAL_REMAP must be enabled)
+ */
+
+#ifdef CONFIG_PWM
+#  if defined(CONFIG_STM32_TIM3_PWM) && defined(CONFIG_STM32_TIM3_PARTIAL_REMAP) && CONFIG_STM32_TIM3_CHANNEL == 2
+#    define STM32TINY_PWMTIMER 3
+#  else
+#    error To use the PWM device, the timer 3 partial remap must be enabled, and the PWM device must be configured on timer 3 / channel 2
+#  endif
+#endif
+
+/************************************************************************************
+ * Public Types
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public data
+ ************************************************************************************/
+
+#ifndef __ASSEMBLY__
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Name: stm32_spiinitialize
+ *
+ * Description:
+ *   Called to configure SPI chip select GPIO pins for the Hy-Mini STM32v board.
+ *
+ ************************************************************************************/
+
+extern void stm32_spiinitialize(void);
+
+/************************************************************************************
+ * Name: stm32_usbinitialize
+ *
+ * Description:
+ *   Called to setup USB-related GPIO pins for the Hy-Mini STM32v board.
+ *
+ ************************************************************************************/
+
+extern void stm32_usbinitialize(void);
+
+/************************************************************************************
+ * Name: up_wlinitialize
+ *
+ * Description:
+ *   Called to configure wireless module (nRF24L01).
+ *
+ ************************************************************************************/
+
+extern void up_wlinitialize(void);
+
+#endif /* __ASSEMBLY__ */
+#endif /* __CONFIGS_HYMINI_STM32V_INTERNAL_H */
+
diff --git a/nuttx/configs/stm32_tiny/src/up_boot.c b/nuttx/configs/stm32_tiny/src/up_boot.c
new file mode 100644
index 000000000..a4f302339
--- /dev/null
+++ b/nuttx/configs/stm32_tiny/src/up_boot.c
@@ -0,0 +1,97 @@
+/************************************************************************************

+ * configs/stm32_tiny/src/up_boot.c

+ *

+ *   Copyright (C) 2009, 2011, 2013 Gregory Nutt. All rights reserved.

+ *   Author: Gregory Nutt <gnutt@nuttx.org>

+ *           Laurent Latil <laurent@latil.nom.fr>

+ *

+ * Redistribution and use in source and binary forms, with or without

+ * modification, are permitted provided that the following conditions

+ * are met:

+ *

+ * 1. Redistributions of source code must retain the above copyright

+ *    notice, this list of conditions and the following disclaimer.

+ * 2. Redistributions in binary form must reproduce the above copyright

+ *    notice, this list of conditions and the following disclaimer in

+ *    the documentation and/or other materials provided with the

+ *    distribution.

+ * 3. Neither the name NuttX nor the names of its contributors may be

+ *    used to endorse or promote products derived from this software

+ *    without specific prior written permission.

+ *

+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS

+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT

+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS

+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE

+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,

+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,

+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS

+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED

+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT

+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN

+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE

+ * POSSIBILITY OF SUCH DAMAGE.

+ *

+ ************************************************************************************/

+

+/************************************************************************************

+ * Included Files

+ ************************************************************************************/

+

+#include <nuttx/config.h>

+#include <nuttx/spi.h>

+#include <debug.h>

+

+#include <arch/board/board.h>

+

+#include "up_arch.h"

+#include "stm32_tiny-internal.h"

+

+/************************************************************************************

+ * Definitions

+ ************************************************************************************/

+

+/************************************************************************************

+ * Private Data

+ ************************************************************************************/

+

+/************************************************************************************

+ * Public Functions

+ ************************************************************************************/

+

+/************************************************************************************

+ * Name: stm32_boardinitialize

+ *

+ * Description:

+ *   All STM32 architectures must provide the following entry point.  This entry point

+ *   is called early in the initialization -- after all memory has been configured

+ *   and mapped but before any devices have been initialized.

+ *

+ ************************************************************************************/

+

+void stm32_boardinitialize(void)

+{

+  /* Configure on-board LEDs if LED support has been selected. */

+

+#ifdef CONFIG_ARCH_LEDS

+  up_ledinit();

+#endif

+

+  /* Configure SPI chip selects if 1) SPI is not disabled, and 2) the weak function

+   * stm32_spiinitialize() has been brought into the link.

+   */

+

+#if defined(CONFIG_STM32_SPI1) || defined(CONFIG_STM32_SPI2)

+  stm32_spiinitialize();

+#endif

+

+   /* Initialize USB is 1) USBDEV is selected, 2) the USB controller is not

+    * disabled, and 3) the weak function stm32_usbinitialize() has been brought

+    * into the build.

+    */

+

+#if defined(CONFIG_USBDEV) && defined(CONFIG_STM32_USB)

+  stm32_usbinitialize();

+#endif

+

+}

diff --git a/nuttx/configs/stm32_tiny/src/up_leds.c b/nuttx/configs/stm32_tiny/src/up_leds.c
new file mode 100644
index 000000000..f5ee45358
--- /dev/null
+++ b/nuttx/configs/stm32_tiny/src/up_leds.c
@@ -0,0 +1,135 @@
+/****************************************************************************
+ * configs/stm32_tiny/src/up_leds.c
+ *
+ *   Copyright (C) 2009, 2011, 2013 Gregory Nutt. All rights reserved.
+ *   Author: Laurent Latil <laurent@latil.nom.fr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <debug.h>
+
+#include <arch/board/board.h>
+
+#include "chip.h"
+#include "up_arch.h"
+#include "up_internal.h"
+#include "stm32.h"
+#include "stm32_tiny-internal.h"
+
+/****************************************************************************
+ * Definitions
+ ****************************************************************************/
+
+/* CONFIG_DEBUG_LEDS enables debug output from this file (needs CONFIG_DEBUG
+ * with CONFIG_DEBUG_VERBOSE too)
+ */
+
+#ifdef CONFIG_DEBUG_LEDS
+#  define leddbg  lldbg
+#  define ledvdbg llvdbg
+#else
+#  define leddbg(x...)
+#  define ledvdbg(x...)
+#endif
+
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+static inline void set_led(bool v)
+{
+  ledvdbg("Turn LED %s\n", v? "on":"off");
+  stm32_gpiowrite(GPIO_LED, v);
+}
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: up_ledinit
+ ****************************************************************************/
+
+#ifdef CONFIG_ARCH_LEDS
+void up_ledinit(void)
+{
+  /* Configure LED GPIO for output */
+  stm32_configgpio(GPIO_LED);
+}
+
+/****************************************************************************
+ * Name: up_ledon
+ ****************************************************************************/
+
+void up_ledon(int led)
+{
+  ledvdbg("up_ledon(%d)\n",led);
+  switch (led)
+    {
+    case LED_STARTED:
+    case LED_HEAPALLOCATE:
+      /* As the board provides only one soft controllable LED, we simply turn it on when the board boots */
+      set_led(true);
+      break;
+    case LED_PANIC:
+      /* For panic state, the LED is blinking */
+      set_led(true);
+      break;
+    }
+}
+
+/****************************************************************************
+ * Name: up_ledoff
+ ****************************************************************************/
+
+void up_ledoff(int led)
+{
+  switch (led)
+    {
+    case LED_PANIC:
+      /* For panic state, the LED is blinking */
+      set_led(false);
+      break;
+    }
+}
+
+#endif /* CONFIG_ARCH_LEDS */
diff --git a/nuttx/configs/stm32_tiny/src/up_nsh.c b/nuttx/configs/stm32_tiny/src/up_nsh.c
new file mode 100644
index 000000000..cbef9ac41
--- /dev/null
+++ b/nuttx/configs/stm32_tiny/src/up_nsh.c
@@ -0,0 +1,90 @@
+/****************************************************************************
+ * config/stm32_tiny/src/up_nsh.c
+ *
+ *   Copyright (C) 2009, 2011, 2013 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <stdbool.h>
+#include <stdio.h>
+#include <debug.h>
+#include <errno.h>
+
+#include "stm32.h"
+#include "stm32_tiny-internal.h"
+
+/****************************************************************************
+ * Pre-Processor Definitions
+ ****************************************************************************/
+
+/* Debug ********************************************************************/
+
+#ifdef CONFIG_CPP_HAVE_VARARGS
+#  ifdef CONFIG_DEBUG
+#    define message(...) lowsyslog(__VA_ARGS__)
+#  else
+#    define message(...) printf(__VA_ARGS__)
+#  endif
+#else
+#  ifdef CONFIG_DEBUG
+#    define message lowsyslog
+#  else
+#    define message printf
+#  endif
+#endif
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: nsh_archinitialize
+ *
+ * Description:
+ *   Perform architecture specific initialization
+ *
+ ****************************************************************************/
+
+int nsh_archinitialize(void)
+{
+#if defined(CONFIG_WL_NRF24L01)
+  message("Register the nRF24L01 module");
+  up_wlinitialize();
+#endif
+
+  return OK;
+}
diff --git a/nuttx/configs/stm32_tiny/src/up_pwm.c b/nuttx/configs/stm32_tiny/src/up_pwm.c
new file mode 100644
index 000000000..70dfdc11f
--- /dev/null
+++ b/nuttx/configs/stm32_tiny/src/up_pwm.c
@@ -0,0 +1,117 @@
+/************************************************************************************
+ * configs/stm32_tiny/src/up_pwm.c
+ *
+ *   Copyright (C) 2012-2013 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <errno.h>
+#include <debug.h>
+
+#include <nuttx/pwm.h>
+#include <arch/board/board.h>
+
+#include "chip.h"
+#include "up_arch.h"
+#include "stm32_pwm.h"
+#include "stm32_tiny-internal.h"
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+/* Configuration *******************************************************************/
+/* PWM
+ *
+ * The STM32 Tiny board provides a LED on GPIO line B5.
+ */
+
+#ifdef CONFIG_PWM
+
+/************************************************************************************
+ * Private Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Name: pwm_devinit
+ *
+ * Description:
+ *   All STM32 architectures must provide the following interface to work with
+ *   examples/pwm.
+ *
+ ************************************************************************************/
+
+int pwm_devinit(void)
+{
+  static bool initialized = false;
+  struct pwm_lowerhalf_s *pwm;
+  int ret;
+
+  /* Have we already initialized? */
+
+  if (!initialized)
+    {
+      /* Call stm32_pwminitialize() to get an instance of the PWM interface */
+
+      pwm = stm32_pwminitialize(STM32TINY_PWMTIMER);
+      if (!pwm)
+        {
+          adbg("Failed to get the STM32 PWM lower half\n");
+          return -ENODEV;
+        }
+
+      /* Register the PWM driver at "/dev/pwm0" */
+
+      ret = pwm_register("/dev/pwm0", pwm);
+      if (ret < 0)
+        {
+          adbg("pwm_register failed: %d\n", ret);
+          return ret;
+        }
+
+      /* Now we are initialized */
+
+      initialized = true;
+    }
+
+  return OK;
+}
+
+#endif /* CONFIG_PWM */
diff --git a/nuttx/configs/stm32_tiny/src/up_spi.c b/nuttx/configs/stm32_tiny/src/up_spi.c
new file mode 100644
index 000000000..ce41670ae
--- /dev/null
+++ b/nuttx/configs/stm32_tiny/src/up_spi.c
@@ -0,0 +1,186 @@
+/************************************************************************************
+ * configs/stm32_tiny/src/up_spi.c
+ *
+ *   Copyright (C) 2009, 2011-2013 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *           Laurent Latil <laurent@latil.nom.fr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <debug.h>
+
+#include <nuttx/spi.h>
+#include <arch/board/board.h>
+
+#include "up_arch.h"
+#include "chip.h"
+#include "stm32.h"
+#include "stm32_tiny-internal.h"
+
+#if defined(CONFIG_STM32_SPI1) || defined(CONFIG_STM32_SPI2)
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+
+/* Enables debug output from this file (needs CONFIG_DEBUG too) */
+
+#ifndef CONFIG_DEBUG
+#  undef CONFIG_DEBUG_VERBOSE
+#  undef CONFIG_DEBUG_SPI
+#endif
+
+#ifdef CONFIG_DEBUG_SPI
+#  define spidbg lldbg
+#  ifdef CONFIG_DEBUG_VERBOSE
+#    define spivdbg lldbg
+#  else
+#    define spivdbg(x...)
+#  endif
+#else
+#  define spidbg(x...)
+#  define spivdbg(x...)
+#endif
+
+/************************************************************************************
+ * Private Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Name: stm32_spiinitialize
+ *
+ * Description:
+ *   Called to configure SPI chip select GPIO pins for the HY-MiniSTM32 board.
+ *
+ ************************************************************************************/
+
+void stm32_spiinitialize(void)
+{
+  /* NOTE: Clocking for SPI1 and/or SPI2 was already provided in stm32_rcc.c.
+   *       Configurations of SPI pins is performed in stm32_spi.c.
+   *       Here, we only initialize chip select pins unique to the board
+   *       architecture.
+   */
+
+#ifdef CONFIG_STM32_SPI2
+#  ifdef CONFIG_WL_NRF24L01
+  /* Configure the SPI-based NRF24L01 chip select GPIO */
+  spivdbg("Configure GPIO for SPI2/CS\n");
+  stm32_configgpio(GPIO_NRF24L01_CS);
+#  endif
+#endif
+}
+
+/****************************************************************************
+ * Name:  stm32_spi1/2select and stm32_spi1/2status
+ *
+ * Description:
+ *   The external functions, stm32_spi1/2/3select and stm32_spi1/2/3status must be
+ *   provided by board-specific logic.  They are implementations of the select
+ *   and status methods of the SPI interface defined by struct spi_ops_s (see
+ *   include/nuttx/spi.h). All other methods (including up_spiinitialize())
+ *   are provided by common STM32 logic.  To use this common SPI logic on your
+ *   board:
+ *
+ *   1. Provide logic in stm32_boardinitialize() to configure SPI chip select
+ *      pins.
+ *   2. Provide stm32_spi1/2/3select() and stm32_spi1/2/3status() functions in your
+ *      board-specific logic.  These functions will perform chip selection and
+ *      status operations using GPIOs in the way your board is configured.
+ *   3. Add a calls to up_spiinitialize() in your low level application
+ *      initialization logic
+ *   4. The handle returned by up_spiinitialize() may then be used to bind the
+ *      SPI driver to higher level logic (e.g., calling
+ *      mmcsd_spislotinitialize(), for example, will bind the SPI driver to
+ *      the SPI MMC/SD driver).
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_STM32_SPI1
+void stm32_spi1select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
+{
+}
+
+uint8_t stm32_spi1status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
+{
+  return 0;
+}
+#endif
+
+#ifdef CONFIG_STM32_SPI2
+void stm32_spi2select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
+{
+  switch(devid)
+  {
+#ifdef CONFIG_WL_NRF24L01
+    case SPIDEV_WIRELESS:
+      spivdbg("nRF24L01 device %s\n", selected ? "asserted" : "de-asserted");
+
+      /* Set the GPIO low to select and high to de-select */
+
+      stm32_gpiowrite(GPIO_NRF24L01_CS, !selected);
+      break;
+#endif
+    default:
+      break;
+  }
+}
+
+uint8_t stm32_spi2status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
+{
+  uint8_t status = 0;
+  switch(devid)
+   {
+#ifdef CONFIG_WL_NRF24L01
+     case SPIDEV_WIRELESS:
+       status |= SPI_STATUS_PRESENT;
+       break;
+#endif
+     default:
+       break;
+   }
+  return status;
+}
+
+#endif
+
+#endif /* CONFIG_STM32_SPI1 || CONFIG_STM32_SPI2 */
diff --git a/nuttx/configs/stm32_tiny/src/up_usbdev.c b/nuttx/configs/stm32_tiny/src/up_usbdev.c
new file mode 100644
index 000000000..72a2e41e1
--- /dev/null
+++ b/nuttx/configs/stm32_tiny/src/up_usbdev.c
@@ -0,0 +1,117 @@
+/************************************************************************************
+ * configs/stm32_tiny/src/up_usbdev.c
+ *
+ *   Copyright (C) 2009-2011, 2013 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *           Laurent Latil <laurent@latil.nom.fr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <sys/types.h>
+#include <stdint.h>
+#include <stdbool.h>
+#include <debug.h>
+
+#include <nuttx/usb/usbdev.h>
+#include <nuttx/usb/usbdev_trace.h>
+
+#include "up_arch.h"
+#include "stm32.h"
+#include "stm32_tiny-internal.h"
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Private Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Name: stm32_usbinitialize
+ *
+ * Description:
+ *   Called to setup USB-related GPIO pins for the Hy-Mini STM32v board.
+ *
+ ************************************************************************************/
+
+void stm32_usbinitialize(void)
+{
+  ulldbg("called\n");
+
+  /* USB Soft Connect Pullup */
+  stm32_configgpio(GPIO_USB_PULLUP);
+}
+
+/************************************************************************************
+ * Name:  stm32_usbpullup
+ *
+ * Description:
+ *   If USB is supported and the board supports a pullup via GPIO (for USB software
+ *   connect and disconnect), then the board software must provide stm32_pullup.
+ *   See include/nuttx/usb/usbdev.h for additional description of this method.
+ *   Alternatively, if no pull-up GPIO the following EXTERN can be redefined to be
+ *   NULL.
+ *
+ ************************************************************************************/
+
+int stm32_usbpullup(FAR struct usbdev_s *dev, bool enable)
+{
+  usbtrace(TRACE_DEVPULLUP, (uint16_t)enable);
+  stm32_gpiowrite(GPIO_USB_PULLUP, !enable);
+  return OK;
+}
+
+/************************************************************************************
+ * Name:  stm32_usbsuspend
+ *
+ * Description:
+ *   Board logic must provide the stm32_usbsuspend logic if the USBDEV driver is
+ *   used.  This function is called whenever the USB enters or leaves suspend mode.
+ *   This is an opportunity for the board logic to shutdown clocks, power, etc.
+ *   while the USB is suspended.
+ *
+ ************************************************************************************/
+
+void stm32_usbsuspend(FAR struct usbdev_s *dev, bool resume)
+{
+  ulldbg("resume: %d\n", resume);
+}
+
diff --git a/nuttx/configs/stm32_tiny/src/up_watchdog.c b/nuttx/configs/stm32_tiny/src/up_watchdog.c
new file mode 100644
index 000000000..874f8a846
--- /dev/null
+++ b/nuttx/configs/stm32_tiny/src/up_watchdog.c
@@ -0,0 +1,135 @@
+/************************************************************************************
+ * configs/stm_tiny/src/up_watchdog.c
+ *
+ *   Copyright (C) 2012-2013 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <errno.h>
+#include <debug.h>
+
+#include <nuttx/watchdog.h>
+#include <arch/board/board.h>
+
+#include "stm32_wdg.h"
+
+#ifdef CONFIG_WATCHDOG
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+/* Configuration *******************************************************************/
+/* Wathdog hardware should be enabled */
+
+#if !defined(CONFIG_STM32_WWDG) && !defined(CONFIG_STM32_IWDG)
+#  warning "One of CONFIG_STM32_WWDG or CONFIG_STM32_IWDG must be defined"
+#endif
+
+/* Select the path to the registered watchdog timer device */
+
+#ifndef CONFIG_STM32_WDG_DEVPATH
+#  ifdef CONFIG_EXAMPLES_WATCHDOG_DEVPATH
+#    define CONFIG_STM32_WDG_DEVPATH CONFIG_EXAMPLES_WATCHDOG_DEVPATH
+#  else
+#    define CONFIG_STM32_WDG_DEVPATH "/dev/watchdog0"
+#  endif
+#endif
+
+/* Use the un-calibrated LSI frequency if we have nothing better */
+
+#if defined(CONFIG_STM32_IWDG) && !defined(CONFIG_STM32_LSIFREQ)
+#  define CONFIG_STM32_LSIFREQ STM32_LSI_FREQUENCY
+#endif
+
+/* Debug ***************************************************************************/
+/* Non-standard debug that may be enabled just for testing the watchdog timer */
+
+#ifndef CONFIG_DEBUG
+#  undef CONFIG_DEBUG_WATCHDOG
+#endif
+
+#ifdef CONFIG_DEBUG_WATCHDOG
+#  define wdgdbg                 dbg
+#  define wdglldbg               lldbg
+#  ifdef CONFIG_DEBUG_VERBOSE
+#    define wdgvdbg              vdbg
+#    define wdgllvdbg            llvdbg
+#  else
+#    define wdgvdbg(x...)
+#    define wdgllvdbg(x...)
+#  endif
+#else
+#  define wdgdbg(x...)
+#  define wdglldbg(x...)
+#  define wdgvdbg(x...)
+#  define wdgllvdbg(x...)
+#endif
+
+/************************************************************************************
+ * Private Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+/****************************************************************************
+ * Name: up_wdginitialize()
+ *
+ * Description:
+ *   Perform architecuture-specific initialization of the Watchdog hardware.
+ *   This interface must be provided by all configurations using
+ *   apps/examples/watchdog
+ *
+ ****************************************************************************/
+
+int up_wdginitialize(void)
+{
+  /* Initialize tha register the watchdog timer device */
+
+#if defined(CONFIG_STM32_WWDG)
+  stm32_wwdginitialize(CONFIG_STM32_WDG_DEVPATH);
+  return OK;
+#elif defined(CONFIG_STM32_IWDG)
+  stm32_iwdginitialize(CONFIG_STM32_WDG_DEVPATH, CONFIG_STM32_LSIFREQ);
+  return OK;
+#else
+  return -ENODEV;
+#endif
+}
+
+#endif /* CONFIG_WATCHDOG */
diff --git a/nuttx/configs/stm32_tiny/src/up_wireless.c b/nuttx/configs/stm32_tiny/src/up_wireless.c
new file mode 100644
index 000000000..6a03ae1f5
--- /dev/null
+++ b/nuttx/configs/stm32_tiny/src/up_wireless.c
@@ -0,0 +1,138 @@
+/************************************************************************************
+ * configs/stm32_tiny/src/up_wireless.c
+ *
+ *   Copyright (C) 2009, 2013 Gregory Nutt. All rights reserved.
+ *   Author: Laurent Latil <laurent@latil.nom.fr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <debug.h>
+#include <errno.h>
+
+#include <nuttx/spi.h>
+#include <nuttx/wireless/nrf24l01.h>
+#include <arch/board/board.h>
+
+#include "up_arch.h"
+#include "chip.h"
+#include "stm32.h"
+#include "stm32_tiny-internal.h"
+
+/************************************************************************************
+ * Private Function Prototypes
+ ************************************************************************************/
+
+static int stm32tiny_wl_irq_attach(xcpt_t isr);
+
+static void stm32tiny_wl_irq_enable(bool enable);
+
+static void stm32tiny_wl_chip_enable(bool enable);
+
+/************************************************************************************
+ * Private Data
+ ************************************************************************************/
+
+static FAR struct nrf24l01_config_s nrf_cfg =
+{
+  .irqattach = stm32tiny_wl_irq_attach,
+  .irqenable = stm32tiny_wl_irq_enable,
+  .chipenable = stm32tiny_wl_chip_enable,
+};
+
+static xcpt_t g_isr;
+
+/************************************************************************************
+ * Private Functions
+ ************************************************************************************/
+
+static int stm32tiny_wl_irq_attach(xcpt_t isr)
+{
+  vdbg("IRQ attached\n");
+
+  g_isr = isr;
+  stm32_gpiosetevent(GPIO_NRF24L01_IRQ, false, true, false, g_isr);
+  return OK;
+}
+
+static void stm32tiny_wl_irq_enable(bool enable)
+{
+  vdbg("IRQ_enabled:%d\n", enable);
+  stm32_gpiosetevent(GPIO_NRF24L01_IRQ, false, true, false, enable? g_isr:NULL);
+}
+
+static void stm32tiny_wl_chip_enable(bool enable)
+{
+  vdbg("CE:%d\n", enable);
+  stm32_gpiowrite(GPIO_NRF24L01_CE, enable);
+}
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+void up_wlinitialize(void)
+{
+#  ifndef CONFIG_STM32_SPI2
+#   error "STM32_SPI2 is required to support nRF24L01 module on this board"
+#  endif
+
+  int result;
+  FAR struct spi_dev_s *spidev;
+
+  /* Setup CE & IRQ line IOs */
+
+  stm32_configgpio(GPIO_NRF24L01_CE);
+  stm32_configgpio(GPIO_NRF24L01_IRQ);
+
+  /* Init SPI bus */
+
+  spidev = up_spiinitialize(2);
+  if (!spidev)
+    {
+      dbg("Failed to initialize SPI bus\n");
+      return;
+    }
+
+  result = nrf24l01_register(spidev, &nrf_cfg);
+  if (result != OK)
+    {
+      dbg("Failed to register initialize SPI bus\n");
+      return;
+    }
+}
+
diff --git a/nuttx/configs/stm32_tiny/usbnsh/Make.defs b/nuttx/configs/stm32_tiny/usbnsh/Make.defs
new file mode 100644
index 000000000..0dd566c25
--- /dev/null
+++ b/nuttx/configs/stm32_tiny/usbnsh/Make.defs
@@ -0,0 +1,111 @@
+############################################################################
+# configs/stm32_tiny/usbnsh/Make.defs
+#
+#   Copyright (C) 2011, 2012-2013 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+include ${TOPDIR}/.config
+include ${TOPDIR}/tools/Config.mk
+include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
+
+LDSCRIPT = ld.script
+
+ifeq ($(WINTOOL),y)
+  # Windows-native toolchains
+  DIRLINK = $(TOPDIR)/tools/copydir.sh
+  DIRUNLINK = $(TOPDIR)/tools/unlink.sh
+  MKDEP = $(TOPDIR)/tools/mknulldeps.sh
+  ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
+  ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
+  ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
+  MAXOPTIMIZATION = -O2
+else
+  # Linux/Cygwin-native toolchain 
+  MKDEP = $(TOPDIR)/tools/mkdeps.sh
+  ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
+  ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
+  ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
+endif
+
+CC = $(CROSSDEV)gcc
+CXX = $(CROSSDEV)g++
+CPP = $(CROSSDEV)gcc -E
+LD = $(CROSSDEV)ld
+AR = $(CROSSDEV)ar rcs
+NM = $(CROSSDEV)nm
+OBJCOPY = $(CROSSDEV)objcopy
+OBJDUMP = $(CROSSDEV)objdump
+
+ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
+ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
+
+ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
+  ARCHOPTIMIZATION = -g -Os
+else
+  ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
+endif
+
+ARCHCFLAGS = -fno-builtin
+ARCHCXXFLAGS = -fno-builtin -fno-exceptions
+ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
+ARCHWARNINGSXX = -Wall -Wshadow
+ARCHDEFINES =
+ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
+
+CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
+CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
+CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
+AFLAGS = $(CFLAGS) -D__ASSEMBLY__
+
+NXFLATLDFLAGS1 = -r -d -warn-common
+NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
+LDNXFLATFLAGS = -e main -s 2048
+
+OBJEXT = .o
+LIBEXT = .a
+EXEEXT =
+
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
+  LDFLAGS += -nostartfiles -nodefaultlibs
+endif
+ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
+  LDFLAGS += -g
+endif
+
+
+HOSTCC = gcc
+HOSTINCLUDES = -I.
+HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
+HOSTLDFLAGS =
+
diff --git a/nuttx/configs/stm32_tiny/usbnsh/defconfig b/nuttx/configs/stm32_tiny/usbnsh/defconfig
new file mode 100644
index 000000000..1d8deb02f
--- /dev/null
+++ b/nuttx/configs/stm32_tiny/usbnsh/defconfig
@@ -0,0 +1,729 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Nuttx/ Configuration
+#
+CONFIG_NUTTX_NEWCONFIG=y
+
+#
+# Build Setup
+#
+# CONFIG_EXPERIMENTAL is not set
+CONFIG_HOST_LINUX=y
+# CONFIG_HOST_OSX is not set
+# CONFIG_HOST_WINDOWS is not set
+# CONFIG_HOST_OTHER is not set
+
+#
+# Build Configuration
+#
+# CONFIG_APPS_DIR="../apps"
+# CONFIG_BUILD_2PASS is not set
+
+#
+# Binary Output Formats
+#
+# CONFIG_RRLOAD_BINARY is not set
+# CONFIG_INTELHEX_BINARY is not set
+# CONFIG_MOTOROLA_SREC is not set
+CONFIG_RAW_BINARY=y
+
+#
+# Customize Header Files
+#
+# CONFIG_ARCH_STDBOOL_H is not set
+# CONFIG_ARCH_MATH_H is not set
+# CONFIG_ARCH_FLOAT_H is not set
+# CONFIG_ARCH_STDARG_H is not set
+
+#
+# Debug Options
+#
+# CONFIG_DEBUG is not set
+# CONFIG_DEBUG_SYMBOLS is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_8051 is not set
+CONFIG_ARCH_ARM=y
+# CONFIG_ARCH_AVR is not set
+# CONFIG_ARCH_HC is not set
+# CONFIG_ARCH_MIPS is not set
+# CONFIG_ARCH_RGMP is not set
+# CONFIG_ARCH_SH is not set
+# CONFIG_ARCH_SIM is not set
+# CONFIG_ARCH_X86 is not set
+# CONFIG_ARCH_Z16 is not set
+# CONFIG_ARCH_Z80 is not set
+CONFIG_ARCH="arm"
+
+#
+# ARM Options
+#
+# CONFIG_ARCH_CHIP_C5471 is not set
+# CONFIG_ARCH_CHIP_CALYPSO is not set
+# CONFIG_ARCH_CHIP_DM320 is not set
+# CONFIG_ARCH_CHIP_IMX is not set
+# CONFIG_ARCH_CHIP_KINETIS is not set
+# CONFIG_ARCH_CHIP_KL is not set
+# CONFIG_ARCH_CHIP_LM is not set
+# CONFIG_ARCH_CHIP_LPC17XX is not set
+# CONFIG_ARCH_CHIP_LPC214X is not set
+# CONFIG_ARCH_CHIP_LPC2378 is not set
+# CONFIG_ARCH_CHIP_LPC31XX is not set
+# CONFIG_ARCH_CHIP_LPC43XX is not set
+# CONFIG_ARCH_CHIP_NUC1XX is not set
+# CONFIG_ARCH_CHIP_SAM3U is not set
+CONFIG_ARCH_CHIP_STM32=y
+# CONFIG_ARCH_CHIP_STR71X is not set
+CONFIG_ARCH_CORTEXM3=y
+CONFIG_ARCH_FAMILY="armv7-m"
+CONFIG_ARCH_CHIP="stm32"
+# CONFIG_ARMV7M_USEBASEPRI is not set
+CONFIG_ARCH_HAVE_CMNVECTOR=y
+# CONFIG_ARMV7M_CMNVECTOR is not set
+CONFIG_ARCH_HAVE_MPU=y
+# CONFIG_ARMV7M_MPU is not set
+
+#
+# ARMV7M Configuration Options
+#
+# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set
+# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
+# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
+CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI=y
+# CONFIG_SERIAL_TERMIOS is not set
+
+#
+# STM32 Configuration Options
+#
+# CONFIG_ARCH_CHIP_STM32F100C8 is not set
+# CONFIG_ARCH_CHIP_STM32F100CB is not set
+# CONFIG_ARCH_CHIP_STM32F100R8 is not set
+# CONFIG_ARCH_CHIP_STM32F100RB is not set
+# CONFIG_ARCH_CHIP_STM32F100RC is not set
+# CONFIG_ARCH_CHIP_STM32F100RD is not set
+# CONFIG_ARCH_CHIP_STM32F100RE is not set
+# CONFIG_ARCH_CHIP_STM32F100V8 is not set
+# CONFIG_ARCH_CHIP_STM32F100VB is not set
+# CONFIG_ARCH_CHIP_STM32F100VC is not set
+# CONFIG_ARCH_CHIP_STM32F100VD is not set
+# CONFIG_ARCH_CHIP_STM32F100VE is not set
+CONFIG_ARCH_CHIP_STM32F103C8=y
+# CONFIG_ARCH_CHIP_STM32F103C4 is not set
+# CONFIG_ARCH_CHIP_STM32F103RET6 is not set
+# CONFIG_ARCH_CHIP_STM32F103VCT6 is not set
+# CONFIG_ARCH_CHIP_STM32F103VET6 is not set
+# CONFIG_ARCH_CHIP_STM32F103ZET6 is not set
+# CONFIG_ARCH_CHIP_STM32F105VBT7 is not set
+# CONFIG_ARCH_CHIP_STM32F107VC is not set
+# CONFIG_ARCH_CHIP_STM32F207IG is not set
+# CONFIG_ARCH_CHIP_STM32F302CB is not set
+# CONFIG_ARCH_CHIP_STM32F302CC is not set
+# CONFIG_ARCH_CHIP_STM32F302RB is not set
+# CONFIG_ARCH_CHIP_STM32F302RC is not set
+# CONFIG_ARCH_CHIP_STM32F302VB is not set
+# CONFIG_ARCH_CHIP_STM32F302VC is not set
+# CONFIG_ARCH_CHIP_STM32F303CB is not set
+# CONFIG_ARCH_CHIP_STM32F303CC is not set
+# CONFIG_ARCH_CHIP_STM32F303RB is not set
+# CONFIG_ARCH_CHIP_STM32F303RC is not set
+# CONFIG_ARCH_CHIP_STM32F303VB is not set
+# CONFIG_ARCH_CHIP_STM32F303VC is not set
+# CONFIG_ARCH_CHIP_STM32F405RG is not set
+# CONFIG_ARCH_CHIP_STM32F405VG is not set
+# CONFIG_ARCH_CHIP_STM32F405ZG is not set
+# CONFIG_ARCH_CHIP_STM32F407VE is not set
+# CONFIG_ARCH_CHIP_STM32F407VG is not set
+# CONFIG_ARCH_CHIP_STM32F407ZE is not set
+# CONFIG_ARCH_CHIP_STM32F407ZG is not set
+# CONFIG_ARCH_CHIP_STM32F407IE is not set
+# CONFIG_ARCH_CHIP_STM32F407IG is not set
+# CONFIG_ARCH_CHIP_STM32F427V is not set
+# CONFIG_ARCH_CHIP_STM32F427Z is not set
+# CONFIG_ARCH_CHIP_STM32F427I is not set
+CONFIG_STM32_STM32F10XX=y
+CONFIG_STM32_PERFORMANCELINE=y
+CONFIG_STM32_MEDIUMDENSITY=y
+# CONFIG_STM32_DFU is not set
+
+#
+# STM32 Peripheral Support
+#
+# CONFIG_STM32_ADC1 is not set
+# CONFIG_STM32_ADC2 is not set
+# CONFIG_STM32_ADC3 is not set
+# CONFIG_STM32_BKP is not set
+# CONFIG_STM32_CAN1 is not set
+# CONFIG_STM32_CRC is not set
+# CONFIG_STM32_DMA1 is not set
+# CONFIG_STM32_DMA2 is not set
+# CONFIG_STM32_DAC1 is not set
+# CONFIG_STM32_DAC2 is not set
+# CONFIG_STM32_I2C1 is not set
+# CONFIG_STM32_I2C2 is not set
+# CONFIG_STM32_IWDG is not set
+# CONFIG_STM32_PWR is not set
+# CONFIG_STM32_SDIO is not set
+# CONFIG_STM32_SPI1 is not set
+# CONFIG_STM32_SPI2 is not set
+# CONFIG_STM32_TIM1 is not set
+# CONFIG_STM32_TIM2 is not set
+# CONFIG_STM32_TIM3 is not set
+# CONFIG_STM32_TIM4 is not set
+# CONFIG_STM32_TIM5 is not set
+# CONFIG_STM32_TIM6 is not set
+# CONFIG_STM32_TIM7 is not set
+# CONFIG_STM32_TIM8 is not set
+CONFIG_STM32_USART1=y
+# CONFIG_STM32_USART2 is not set
+# CONFIG_STM32_USART3 is not set
+# CONFIG_STM32_UART4 is not set
+# CONFIG_STM32_UART5 is not set
+CONFIG_STM32_USB=y
+# CONFIG_STM32_WWDG is not set
+
+#
+# Alternate Pin Mapping
+#
+# CONFIG_STM32_USART1_REMAP is not set
+# CONFIG_STM32_JTAG_DISABLE is not set
+CONFIG_STM32_JTAG_FULL_ENABLE=y
+# CONFIG_STM32_JTAG_NOJNTRST_ENABLE is not set
+# CONFIG_STM32_JTAG_SW_ENABLE is not set
+# CONFIG_STM32_FORCEPOWER is not set
+# CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG is not set
+CONFIG_STM32_USART=y
+
+#
+# U[S]ART Configuration
+#
+# CONFIG_USART1_RS485 is not set
+# CONFIG_STM32_USART_SINGLEWIRE is not set
+
+#
+# USB Host Configuration
+#
+
+#
+# USB Device Configuration
+#
+
+#
+# External Memory Configuration
+#
+
+#
+# Architecture Options
+#
+# CONFIG_ARCH_NOINTC is not set
+# CONFIG_ARCH_VECNOTIRQ is not set
+# CONFIG_ARCH_DMA is not set
+CONFIG_ARCH_IRQPRIO=y
+# CONFIG_CUSTOM_STACK is not set
+# CONFIG_ADDRENV is not set
+CONFIG_ARCH_HAVE_VFORK=y
+CONFIG_ARCH_STACKDUMP=y
+# CONFIG_ENDIAN_BIG is not set
+# CONFIG_ARCH_HAVE_RAMFUNCS is not set
+CONFIG_ARCH_HAVE_RAMVECTORS=y
+# CONFIG_ARCH_RAMVECTORS is not set
+
+#
+# Board Settings
+#
+CONFIG_BOARD_LOOPSPERMSEC=5483
+# CONFIG_ARCH_CALIBRATION is not set
+CONFIG_DRAM_START=0x20000000
+CONFIG_DRAM_SIZE=20480
+CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
+CONFIG_ARCH_INTERRUPTSTACK=0
+
+#
+# Boot options
+#
+# CONFIG_BOOT_RUNFROMEXTSRAM is not set
+CONFIG_BOOT_RUNFROMFLASH=y
+# CONFIG_BOOT_RUNFROMISRAM is not set
+# CONFIG_BOOT_RUNFROMSDRAM is not set
+# CONFIG_BOOT_COPYTORAM is not set
+
+#
+# Board Selection
+#
+CONFIG_ARCH_BOARD_STM32_TINY=y
+# CONFIG_ARCH_BOARD_CUSTOM is not set
+CONFIG_ARCH_BOARD="stm32_tiny"
+
+#
+# Common Board Options
+#
+CONFIG_ARCH_HAVE_LEDS=y
+CONFIG_ARCH_LEDS=y
+CONFIG_NSH_MMCSDMINOR=0
+
+#
+# Board-Specific Options
+#
+
+#
+# RTOS Features
+#
+# CONFIG_BOARD_INITIALIZE is not set
+CONFIG_MSEC_PER_TICK=10
+CONFIG_RR_INTERVAL=200
+# CONFIG_SCHED_INSTRUMENTATION is not set
+CONFIG_TASK_NAME_SIZE=0
+# CONFIG_SCHED_HAVE_PARENT is not set
+# CONFIG_JULIAN_TIME is not set
+CONFIG_START_YEAR=2011
+CONFIG_START_MONTH=7
+CONFIG_START_DAY=5
+# CONFIG_DEV_CONSOLE is not set
+# CONFIG_MUTEX_TYPES is not set
+# CONFIG_PRIORITY_INHERITANCE is not set
+# CONFIG_FDCLONE_DISABLE is not set
+# CONFIG_FDCLONE_STDIO is not set
+CONFIG_SDCLONE_DISABLE=y
+CONFIG_SCHED_WAITPID=y
+# CONFIG_SCHED_STARTHOOK is not set
+# CONFIG_SCHED_ATEXIT is not set
+# CONFIG_SCHED_ONEXIT is not set
+CONFIG_USER_ENTRYPOINT="nsh_main"
+# CONFIG_DISABLE_OS_API is not set
+
+#
+# Signal Numbers
+#
+CONFIG_SIG_SIGUSR1=1
+CONFIG_SIG_SIGUSR2=2
+CONFIG_SIG_SIGALARM=3
+CONFIG_SIG_SIGCONDTIMEDOUT=16
+
+#
+# Sizes of configurable things (0 disables)
+#
+CONFIG_MAX_TASKS=16
+CONFIG_MAX_TASK_ARGS=4
+CONFIG_NPTHREAD_KEYS=4
+CONFIG_NFILE_DESCRIPTORS=8
+CONFIG_NFILE_STREAMS=8
+CONFIG_NAME_MAX=32
+CONFIG_PREALLOC_MQ_MSGS=4
+CONFIG_MQ_MAXMSGSIZE=32
+CONFIG_MAX_WDOGPARMS=2
+CONFIG_PREALLOC_WDOGS=4
+CONFIG_PREALLOC_TIMERS=4
+
+#
+# Stack and heap information
+#
+CONFIG_IDLETHREAD_STACKSIZE=1024
+CONFIG_USERMAIN_STACKSIZE=2048
+CONFIG_PTHREAD_STACK_MIN=256
+CONFIG_PTHREAD_STACK_DEFAULT=2048
+
+#
+# Device Drivers
+#
+CONFIG_DISABLE_POLL=y
+CONFIG_DEV_NULL=y
+# CONFIG_DEV_ZERO is not set
+# CONFIG_LOOP is not set
+# CONFIG_RAMDISK is not set
+# CONFIG_CAN is not set
+# CONFIG_PWM is not set
+# CONFIG_I2C is not set
+CONFIG_ARCH_HAVE_I2CRESET=y
+# CONFIG_SPI is not set
+# CONFIG_RTC is not set
+# CONFIG_WATCHDOG is not set
+# CONFIG_ANALOG is not set
+# CONFIG_BCH is not set
+# CONFIG_INPUT is not set
+# CONFIG_LCD is not set
+# CONFIG_MMCSD is not set
+# CONFIG_MTD is not set
+# CONFIG_PIPES is not set
+# CONFIG_PM is not set
+# CONFIG_POWER is not set
+# CONFIG_SENSORS is not set
+# CONFIG_SERCOMM_CONSOLE is not set
+CONFIG_SERIAL=y
+# CONFIG_DEV_LOWCONSOLE is not set
+CONFIG_SERIAL_REMOVABLE=y
+# CONFIG_16550_UART is not set
+CONFIG_ARCH_HAVE_USART1=y
+CONFIG_MCU_SERIAL=y
+CONFIG_STANDARD_SERIAL=y
+CONFIG_USART1_SERIAL_CONSOLE=y
+# CONFIG_NO_SERIAL_CONSOLE is not set
+
+#
+# USART1 Configuration
+#
+CONFIG_USART1_RXBUFSIZE=256
+CONFIG_USART1_TXBUFSIZE=256
+CONFIG_USART1_BAUD=115200
+CONFIG_USART1_BITS=8
+CONFIG_USART1_PARITY=0
+CONFIG_USART1_2STOP=0
+CONFIG_USBDEV=y
+
+#
+# USB Device Controller Driver Options
+#
+# CONFIG_USBDEV_ISOCHRONOUS is not set
+# CONFIG_USBDEV_DUALSPEED is not set
+CONFIG_USBDEV_SELFPOWERED=y
+# CONFIG_USBDEV_BUSPOWERED is not set
+CONFIG_USBDEV_MAXPOWER=100
+# CONFIG_USBDEV_DMA is not set
+CONFIG_USBDEV_TRACE=y
+CONFIG_USBDEV_TRACE_NRECORDS=32
+# CONFIG_USBDEV_TRACE_STRINGS is not set
+
+#
+# USB Device Class Driver Options
+#
+# CONFIG_USBDEV_COMPOSITE is not set
+# CONFIG_PL2303 is not set
+CONFIG_CDCACM=y
+CONFIG_CDCACM_CONSOLE=y
+CONFIG_CDCACM_EP0MAXPACKET=64
+CONFIG_CDCACM_EPINTIN=1
+CONFIG_CDCACM_EPINTIN_FSSIZE=64
+CONFIG_CDCACM_EPINTIN_HSSIZE=64
+CONFIG_CDCACM_EPBULKOUT=3
+CONFIG_CDCACM_EPBULKOUT_FSSIZE=64
+CONFIG_CDCACM_EPBULKOUT_HSSIZE=512
+CONFIG_CDCACM_EPBULKIN=2
+CONFIG_CDCACM_EPBULKIN_FSSIZE=64
+CONFIG_CDCACM_EPBULKIN_HSSIZE=512
+CONFIG_CDCACM_NWRREQS=4
+CONFIG_CDCACM_NRDREQS=4
+CONFIG_CDCACM_RXBUFSIZE=256
+CONFIG_CDCACM_TXBUFSIZE=256
+CONFIG_CDCACM_VENDORID=0x0525
+CONFIG_CDCACM_PRODUCTID=0xa4a7
+CONFIG_CDCACM_VENDORSTR="NuttX"
+CONFIG_CDCACM_PRODUCTSTR="CDC/ACM Serial"
+# CONFIG_USBMSC is not set
+# CONFIG_USBHOST is not set
+# CONFIG_WIRELESS is not set
+
+#
+# System Logging Device Options
+#
+
+#
+# System Logging
+#
+# CONFIG_RAMLOG is not set
+
+#
+# Networking Support
+#
+# CONFIG_NET is not set
+
+#
+# File Systems
+#
+
+#
+# File system configuration
+#
+# CONFIG_DISABLE_MOUNTPOINT is not set
+# CONFIG_FS_RAMMAP is not set
+# CONFIG_FS_FAT is not set
+# CONFIG_FS_NXFFS is not set
+# CONFIG_FS_ROMFS is not set
+# CONFIG_FS_BINFS is not set
+
+#
+# System Logging
+#
+# CONFIG_SYSLOG_ENABLE is not set
+# CONFIG_SYSLOG is not set
+
+#
+# Graphics Support
+#
+# CONFIG_NX is not set
+
+#
+# Memory Management
+#
+# CONFIG_MM_MULTIHEAP is not set
+# CONFIG_MM_SMALL is not set
+CONFIG_MM_REGIONS=1
+# CONFIG_GRAN is not set
+
+#
+# Binary Formats
+#
+# CONFIG_BINFMT_DISABLE is not set
+# CONFIG_BINFMT_EXEPATH is not set
+# CONFIG_NXFLAT is not set
+# CONFIG_ELF is not set
+CONFIG_BUILTIN=y
+# CONFIG_PIC is not set
+CONFIG_SYMTAB_ORDEREDBYNAME=y
+
+#
+# Library Routines
+#
+
+#
+# Standard C Library Options
+#
+CONFIG_STDIO_BUFFER_SIZE=64
+CONFIG_STDIO_LINEBUFFER=y
+CONFIG_NUNGET_CHARS=2
+CONFIG_LIB_HOMEDIR="/"
+# CONFIG_LIBM is not set
+# CONFIG_NOPRINTF_FIELDWIDTH is not set
+# CONFIG_LIBC_FLOATINGPOINT is not set
+# CONFIG_EOL_IS_CR is not set
+# CONFIG_EOL_IS_LF is not set
+# CONFIG_EOL_IS_BOTH_CRLF is not set
+CONFIG_EOL_IS_EITHER_CRLF=y
+# CONFIG_LIBC_EXECFUNCS is not set
+CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
+CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
+# CONFIG_LIBC_STRERROR is not set
+# CONFIG_LIBC_PERROR_STDOUT is not set
+CONFIG_ARCH_LOWPUTC=y
+CONFIG_LIB_SENDFILE_BUFSIZE=512
+# CONFIG_ARCH_ROMGETC is not set
+# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
+
+#
+# Non-standard Library Support
+#
+# CONFIG_SCHED_WORKQUEUE is not set
+# CONFIG_LIB_KBDCODEC is not set
+
+#
+# Basic CXX Support
+#
+# CONFIG_C99_BOOL8 is not set
+# CONFIG_HAVE_CXX is not set
+
+#
+# Application Configuration
+#
+
+#
+# Built-In Applications
+#
+CONFIG_BUILTIN_PROXY_STACKSIZE=1024
+
+#
+# Examples
+#
+# CONFIG_EXAMPLES_BUTTONS is not set
+# CONFIG_EXAMPLES_CAN is not set
+# CONFIG_EXAMPLES_CDCACM is not set
+# CONFIG_EXAMPLES_COMPOSITE is not set
+# CONFIG_EXAMPLES_DHCPD is not set
+# CONFIG_EXAMPLES_ELF is not set
+# CONFIG_EXAMPLES_FTPC is not set
+# CONFIG_EXAMPLES_FTPD is not set
+# CONFIG_EXAMPLES_HELLO is not set
+# CONFIG_EXAMPLES_HELLOXX is not set
+# CONFIG_EXAMPLES_JSON is not set
+# CONFIG_EXAMPLES_HIDKBD is not set
+# CONFIG_EXAMPLES_KEYPADTEST is not set
+# CONFIG_EXAMPLES_IGMP is not set
+# CONFIG_EXAMPLES_LCDRW is not set
+# CONFIG_EXAMPLES_MM is not set
+# CONFIG_EXAMPLES_MOUNT is not set
+# CONFIG_EXAMPLES_MODBUS is not set
+CONFIG_EXAMPLES_NSH=y
+# CONFIG_EXAMPLES_NULL is not set
+# CONFIG_EXAMPLES_NX is not set
+# CONFIG_EXAMPLES_NXCONSOLE is not set
+# CONFIG_EXAMPLES_NXFFS is not set
+# CONFIG_EXAMPLES_NXFLAT is not set
+# CONFIG_EXAMPLES_NXHELLO is not set
+# CONFIG_EXAMPLES_NXIMAGE is not set
+# CONFIG_EXAMPLES_NXLINES is not set
+# CONFIG_EXAMPLES_NXTEXT is not set
+# CONFIG_EXAMPLES_OSTEST is not set
+# CONFIG_EXAMPLES_PASHELLO is not set
+# CONFIG_EXAMPLES_PIPE is not set
+# CONFIG_EXAMPLES_POSIXSPAWN is not set
+# CONFIG_EXAMPLES_QENCODER is not set
+# CONFIG_EXAMPLES_RGMP is not set
+# CONFIG_EXAMPLES_ROMFS is not set
+# CONFIG_EXAMPLES_SENDMAIL is not set
+# CONFIG_EXAMPLES_SERLOOP is not set
+# CONFIG_EXAMPLES_TELNETD is not set
+# CONFIG_EXAMPLES_THTTPD is not set
+# CONFIG_EXAMPLES_TIFF is not set
+# CONFIG_EXAMPLES_TOUCHSCREEN is not set
+# CONFIG_EXAMPLES_UDP is not set
+# CONFIG_EXAMPLES_UIP is not set
+# CONFIG_EXAMPLES_USBSERIAL is not set
+# CONFIG_EXAMPLES_USBMSC is not set
+# CONFIG_EXAMPLES_USBTERM is not set
+# CONFIG_EXAMPLES_WATCHDOG is not set
+
+#
+# Graphics Support
+#
+# CONFIG_TIFF is not set
+
+#
+# Interpreters
+#
+# CONFIG_INTERPRETERS_FICL is not set
+# CONFIG_INTERPRETERS_PCODE is not set
+
+#
+# Network Utilities
+#
+
+#
+# Networking Utilities
+#
+# CONFIG_NETUTILS_CODECS is not set
+# CONFIG_NETUTILS_DHCPC is not set
+# CONFIG_NETUTILS_DHCPD is not set
+# CONFIG_NETUTILS_FTPC is not set
+# CONFIG_NETUTILS_FTPD is not set
+# CONFIG_NETUTILS_JSON is not set
+# CONFIG_NETUTILS_RESOLV is not set
+# CONFIG_NETUTILS_SMTP is not set
+# CONFIG_NETUTILS_TELNETD is not set
+# CONFIG_NETUTILS_TFTPC is not set
+# CONFIG_NETUTILS_THTTPD is not set
+# CONFIG_NETUTILS_UIPLIB is not set
+# CONFIG_NETUTILS_WEBCLIENT is not set
+
+#
+# FreeModBus
+#
+# CONFIG_MODBUS is not set
+
+#
+# NSH Library
+#
+CONFIG_NSH_LIBRARY=y
+CONFIG_NSH_BUILTIN_APPS=y
+
+#
+# Disable Individual commands
+#
+# CONFIG_NSH_DISABLE_CAT is not set
+# CONFIG_NSH_DISABLE_CD is not set
+# CONFIG_NSH_DISABLE_CP is not set
+# CONFIG_NSH_DISABLE_DD is not set
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_EXEC is not set
+# CONFIG_NSH_DISABLE_EXIT is not set
+# CONFIG_NSH_DISABLE_FREE is not set
+# CONFIG_NSH_DISABLE_GET is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_HEXDUMP is not set
+CONFIG_NSH_DISABLE_IFCONFIG=y
+# CONFIG_NSH_DISABLE_KILL is not set
+CONFIG_NSH_DISABLE_LOSETUP=y
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MB is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
+# CONFIG_NSH_DISABLE_MKFATFS is not set
+# CONFIG_NSH_DISABLE_MKFIFO is not set
+# CONFIG_NSH_DISABLE_MKRD is not set
+# CONFIG_NSH_DISABLE_MH is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MW is not set
+# CONFIG_NSH_DISABLE_NSFMOUNT is not set
+# CONFIG_NSH_DISABLE_PS is not set
+# CONFIG_NSH_DISABLE_PING is not set
+# CONFIG_NSH_DISABLE_PUT is not set
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_RM is not set
+# CONFIG_NSH_DISABLE_RMDIR is not set
+# CONFIG_NSH_DISABLE_SET is not set
+# CONFIG_NSH_DISABLE_SH is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_TEST is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
+# CONFIG_NSH_DISABLE_WGET is not set
+# CONFIG_NSH_DISABLE_XD is not set
+CONFIG_NSH_CODECS_BUFSIZE=128
+CONFIG_NSH_FILEIOSIZE=1024
+CONFIG_NSH_LINELEN=80
+CONFIG_NSH_NESTDEPTH=3
+# CONFIG_NSH_DISABLESCRIPT is not set
+# CONFIG_NSH_DISABLEBG is not set
+CONFIG_NSH_CONSOLE=y
+# CONFIG_NSH_USBCONSOLE is not set
+
+#
+# USB Trace Support
+#
+# CONFIG_NSH_USBDEV_TRACE is not set
+# CONFIG_NSH_CONDEV is not set
+# CONFIG_NSH_ARCHINIT is not set
+
+#
+# NxWidgets/NxWM
+#
+
+#
+# System NSH Add-Ons
+#
+
+#
+# Custom Free Memory Command
+#
+# CONFIG_SYSTEM_FREE is not set
+
+#
+# I2C tool
+#
+
+#
+# FLASH Program Installation
+#
+# CONFIG_SYSTEM_INSTALL is not set
+
+#
+# RAM Test
+#
+# CONFIG_SYSTEM_RAMTEST is not set
+
+#
+# readline()
+#
+CONFIG_SYSTEM_READLINE=y
+CONFIG_READLINE_ECHO=y
+
+#
+# Power Off
+#
+# CONFIG_SYSTEM_POWEROFF is not set
+
+#
+# RAMTRON
+#
+# CONFIG_SYSTEM_RAMTRON is not set
+
+#
+# SD Card
+#
+# CONFIG_SYSTEM_SDCARD is not set
+
+#
+# Sysinfo
+#
+# CONFIG_SYSTEM_SYSINFO is not set
+
+#
+# USB Monitor
+#
diff --git a/nuttx/configs/stm32_tiny/usbnsh/setenv.sh b/nuttx/configs/stm32_tiny/usbnsh/setenv.sh
new file mode 100755
index 000000000..0123f81d8
--- /dev/null
+++ b/nuttx/configs/stm32_tiny/usbnsh/setenv.sh
@@ -0,0 +1,47 @@
+#!/bin/bash
+# configs/stm32_tiny/usbnsh/setenv.sh
+#
+#   Copyright (C) 2011, 2013 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+
+if [ "$(basename $0)" = "setenv.sh" ] ; then
+  echo "You must source this script, not run it!" 1>&2
+  exit 1
+fi
+
+if [ -z "${PATH_ORIG}" ]; then export PATH_ORIG="${PATH}"; fi
+
+WD=`pwd`
+export RIDE_BIN="/cygdrive/c/Program Files/Raisonance/Ride/arm-gcc/bin"
+export BUILDROOT_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
+export PATH="${BUILDROOT_BIN}:${RIDE_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
+
+echo "PATH : ${PATH}"