First cut at x86 build environment

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3336 42af7a65-404d-4744-a932-0658087f49c3

59 files changed, 5367 insertions, 87 deletions

diff --git a/nuttx/arch/README.txt b/nuttx/arch/README.txt
index 7ef23b3d3..8bcdda6e6 100644
--- a/nuttx/arch/README.txt
+++ b/nuttx/arch/README.txt
@@ -50,20 +50,20 @@ subdirectory).  Each architecture must provide a subdirectory <arch-name>
 under arch/ with the following characteristics:
 
 
-	<arch-name>/
-	|-- include/
-	|   |--<chip-name>/
-	|   |  `-- (chip-specific header files)
-	|   |--<other-chips>/
-	|   |-- arch.h
-	|   |-- irq.h
-	|   `-- types.h
-	`-- src/
-	    |--<chip-name>/
-	    |  `-- (chip-specific source files)
-	    |--<other-chips>/
-	    |-- Makefile
-	    `-- (architecture-specific source files)
+        <arch-name>/
+        |-- include/
+        |   |--<chip-name>/
+        |   |  `-- (chip-specific header files)
+        |   |--<other-chips>/
+        |   |-- arch.h
+        |   |-- irq.h
+        |   `-- types.h
+        `-- src/
+            |--<chip-name>/
+            |  `-- (chip-specific source files)
+            |--<other-chips>/
+            |-- Makefile
+            `-- (architecture-specific source files)
 
 Summary of Files
 ^^^^^^^^^^^^^^^^
@@ -158,10 +158,10 @@ arch/arm - ARM-based micro-controllers
         complete, verified, and included in the NuttX release 0.2.1.
 
     arch/arm/include/imx and arch/arm/src/imx
-	Freescale MC9328MX1 or i.MX1. This port uses the Freescale MX1ADS
-	development board with a GNU arm-elf toolchain* under either Linux or Cygwin.
-	STATUS: This port has stalled because of development tool issues. Coding
-	is complete on the basic port (timer, serial console, SPI).
+        Freescale MC9328MX1 or i.MX1. This port uses the Freescale MX1ADS
+        development board with a GNU arm-elf toolchain* under either Linux or Cygwin.
+        STATUS: This port has stalled because of development tool issues. Coding
+        is complete on the basic port (timer, serial console, SPI).
 
     arch/arm/include/lm3s and arch/arm/src/lm3s
         These directories contain support for the Luminary LMS family, particularly
@@ -178,43 +178,43 @@ arch/arm - ARM-based micro-controllers
         support.  A verifed NuttShell (NSH) configuration is also available.
 
     arch/arm/include/lpc2378 and arch/arm/src/lpc2378.
-	NXP LPC2378. Support is provided for the NXP LPC2378 MCU. This port was
-	contributed by Rommel Marcelo is was first released in NuttX-5.3.
-	STATUS: This port boots and passes the OS test (examples/ostest) and
-	includes a working implementation of the NuttShell (NSH). The port is
-	complete and verified. As of NuttX 5.3, the port includes only basic
-	timer interrupts and serial console support.
+        NXP LPC2378. Support is provided for the NXP LPC2378 MCU. This port was
+        contributed by Rommel Marcelo is was first released in NuttX-5.3.
+        STATUS: This port boots and passes the OS test (examples/ostest) and
+        includes a working implementation of the NuttShell (NSH). The port is
+        complete and verified. As of NuttX 5.3, the port includes only basic
+        timer interrupts and serial console support.
 
     arch/arm/include/lpc313x and arch/arm/src/lpc313x
         These directories provide support for NXP LPC313x family of
         ARM926EJ-S processors.  The port for the NXP LPC3131 was first
-	released in NuttX-5.1 (but was not functional until NuttX-5.2).
-	STATUS: The basic EA3131 port is complete and verified in NuttX-5.2
-	This basic port includes basic boot-up, serial console, and timer
-	interrupts. This port was extended in NuttX 5.3 with a USB high
-	speed driver contributed by David Hewson. This port has been
-	verified using the NuttX OS test, USB serial and mass storage tests
-	and includes a working implementation of the NuttShell ((NSH)).
+        released in NuttX-5.1 (but was not functional until NuttX-5.2).
+        STATUS: The basic EA3131 port is complete and verified in NuttX-5.2
+        This basic port includes basic boot-up, serial console, and timer
+        interrupts. This port was extended in NuttX 5.3 with a USB high
+        speed driver contributed by David Hewson. This port has been
+        verified using the NuttX OS test, USB serial and mass storage tests
+        and includes a working implementation of the NuttShell ((NSH)).
 
     arch/arm/include/sam3u and arch/arm/src/sam3u
-	Atmel AT91SAM3U. This port is for Atmel AT91SAM3U4E MCU.
-	STATUS: The basic AT91SAM3U port was released in NuttX version 5.1.
-	The basic port includes boot-up logic, interrupt driven serial
-	console, and system timer interrupts. That release passes the
-	NuttX OS test and is proven to have a valid OS implementation. A 
-	onfiguration to support the NuttShell is also included.
+        Atmel AT91SAM3U. This port is for Atmel AT91SAM3U4E MCU.
+        STATUS: The basic AT91SAM3U port was released in NuttX version 5.1.
+        The basic port includes boot-up logic, interrupt driven serial
+        console, and system timer interrupts. That release passes the
+        NuttX OS test and is proven to have a valid OS implementation. A 
+        onfiguration to support the NuttShell is also included.
 
     arch/arm/include/stm32 and arch/arm/src/stm32
-	These directories contain support for the STMicro STM32 family, particularly
-	for the STM32F103ZET6. 
-	STATUS: The basic STM32 port was released in NuttX version 0.4.12.
-	The basic port includes boot-up logic, interrupt driven serial console,
-	and system timer interrupts. The 0.4.13 release added support for SPI,
-	serial FLASH, and USB device.; The 4.14 release added support for
-	buttons and SDIO-based MMC/SD and verifed DMA support. Verified
-	configurations are available for NuttX OS test, the NuttShell (NSH)
-	example, the USB serial device class, and the USB mass storage device 
-	lass example. 
+        These directories contain support for the STMicro STM32 family, particularly
+        for the STM32F103ZET6. 
+        STATUS: The basic STM32 port was released in NuttX version 0.4.12.
+        The basic port includes boot-up logic, interrupt driven serial console,
+        and system timer interrupts. The 0.4.13 release added support for SPI,
+        serial FLASH, and USB device.; The 4.14 release added support for
+        buttons and SDIO-based MMC/SD and verifed DMA support. Verified
+        configurations are available for NuttX OS test, the NuttShell (NSH)
+        example, the USB serial device class, and the USB mass storage device 
+        lass example. 
 
     arch/arm/include/str71x and arch/arm/src/str71x
         These directories provide support for the STMicro STR71x processors.
@@ -236,14 +236,15 @@ arch/avr
 arch/hc
     This directory is dedicated to ports to the Freescale HC family.
 
-    arch/arm/include/hcs12 and arch/arm/src/hcs12
-      These directories provide support for the Freescale m68hcs12 family.
-      STATUS:  Fragments of this port were released in nuttx-5.0, but porting effort
-      has been stalled because of higher priority tasks.
+    arch/arm/include/m9s12 and arch/arm/src/m9s12
+      These directories provide support for the Freescale mc9s12x family.
+      STATUS:  Fragments of this port were first released in nuttx-5.0 and
+      the port was "code-complete" as nuttx-5.18.  However, the final
+      verification effort has been stalled because of higher priority tasks.
 
 arch/m68322
     A work in progress.
-    STATUS:  Stalled for the moment.
+    STATUS:  Stalled for the time being.
 
 arch/sh - SuperH and related Hitachi/Renesas microcontrollers
 
@@ -256,6 +257,22 @@ arch/sh - SuperH and related Hitachi/Renesas microcontrollers
 arch/8051 - 8051/52 microcontrollers
     8051 Microcontroller.  This port is not quite ready for prime time.
 
+arch/x86 - Intel x86 architectures
+    This directory holds related, 32- and 64-bit architectures from Intel.
+    At present, this includes the following subdirectories:
+
+    arch/x86/include and arch/x86/src/common
+        Common x86 logic.
+
+    arch/x86/include/i486 and arch/x86/src/i486
+        These directories hold definitions and logic appropriate for any
+        instantiation of the 32-bit i486 architecture.
+
+    arch/x86/include/qemu and arch/x86/src/qemu
+        This is the implementation of NuttX on the QEMU x86 simulation.
+
+    STATUS:  This is a work in progress and not yet ready for prime time.
+
 arch/z16 - ZiLOG 16-bit processors
     This directory holds related, 16-bit architectures from ZiLOG.  At
     present, this includes the following subdirectories:
diff --git a/nuttx/arch/arm/include/irq.h b/nuttx/arch/arm/include/irq.h
index 2ee412334..da8c09d36 100644
--- a/nuttx/arch/arm/include/irq.h
+++ b/nuttx/arch/arm/include/irq.h
@@ -1,7 +1,7 @@
 /****************************************************************************
  * arch/arm/include/irq.h
  *
- *   Copyright (C) 2007-2009 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2007-2009, 2011 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -52,7 +52,7 @@
 
 #include <arch/chip/irq.h>
 
-/* Include ARM architectgure-specific IRQ definitions (including register
+/* Include ARM architecture-specific IRQ definitions (including register
  * save structure and irqsave()/irqrestore() macros
  */
 
diff --git a/nuttx/arch/arm/include/serial.h b/nuttx/arch/arm/include/serial.h
index 636e90947..d539d2733 100644
--- a/nuttx/arch/arm/include/serial.h
+++ b/nuttx/arch/arm/include/serial.h
@@ -1,7 +1,7 @@
 /****************************************************************************
  * arch/arm/include/serial.h
  *
- *   Copyright (C) 2007-2009 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2007-2009, 2011 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -41,17 +41,12 @@
  ****************************************************************************/
 
 #include <sys/types.h>
+#include <nuttx/ioctl.h>
 
 /****************************************************************************
  * Definitions
  ****************************************************************************/
 
-/* IOCTL commands supported by the ARM serial driver */
-
-#define TIOCSBRK        0x5401  /* BSD compatibility */
-#define TIOCCBRK        0x5402  /* " " "           " */
-#define TIOCSERGSTRUCT  0x5403  /* Get up_dev_t for port */
-
 /****************************************************************************
  * Public Data
  ****************************************************************************/
diff --git a/nuttx/arch/arm/include/watchdog.h b/nuttx/arch/arm/include/watchdog.h
index 6752ea62b..263795eb3 100644
--- a/nuttx/arch/arm/include/watchdog.h
+++ b/nuttx/arch/arm/include/watchdog.h
@@ -1,7 +1,7 @@
 /****************************************************************************
  * arch/arm/include/watchdog.h
  *
- *   Copyright (C) 2007, 2008 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2007, 2008, 2011 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -40,14 +40,12 @@
  * Included Files
  ****************************************************************************/
 
+#include <nuttx/ioctl.h>
+
 /****************************************************************************
  * Definitions
  ****************************************************************************/
 
-/* IOCTL commands supported by the C5471 watchdog driver */
-
-#define WDIOC_KEEPALIVE 0x5701  /* Restart the watchdog timer */
-
 /****************************************************************************
  * Private Data
  ****************************************************************************/
diff --git a/nuttx/arch/arm/src/common/up_createstack.c b/nuttx/arch/arm/src/common/up_createstack.c
index f56d36390..0c9f0809f 100644
--- a/nuttx/arch/arm/src/common/up_createstack.c
+++ b/nuttx/arch/arm/src/common/up_createstack.c
@@ -109,18 +109,18 @@ int up_create_stack(_TCB *tcb, size_t stack_size)
        size_t size_of_stack;
 
        /* The ARM uses a push-down stack:  the stack grows
-	* toward loweraddresses in memory.  The stack pointer
-	* register, points to the lowest, valid work address
-	* (the "top" of the stack).  Items on the stack are
-	* referenced as positive word offsets from sp.
-	*/
+        * toward loweraddresses in memory.  The stack pointer
+        * register, points to the lowest, valid work address
+        * (the "top" of the stack).  Items on the stack are
+        * referenced as positive word offsets from sp.
+        */
 
        top_of_stack = (uint32_t)tcb->stack_alloc_ptr + stack_size - 4;
 
        /* The ARM stack must be aligned at word (4 byte)
-	* boundaries. If necessary top_of_stack must be rounded
-	* down to the next boundary
-	*/
+        * boundaries. If necessary top_of_stack must be rounded
+        * down to the next boundary
+        */
 
        top_of_stack &= ~3;
        size_of_stack = top_of_stack - (uint32_t)tcb->stack_alloc_ptr + 4;
diff --git a/nuttx/arch/sh/include/serial.h b/nuttx/arch/sh/include/serial.h
index 2790b0871..5cb942c1c 100644
--- a/nuttx/arch/sh/include/serial.h
+++ b/nuttx/arch/sh/include/serial.h
@@ -1,7 +1,7 @@
 /****************************************************************************
  * arch/sh/include/serial.h
  *
- *   Copyright (C) 2008 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2008, 2011 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -40,6 +40,8 @@
  * Included Files
  ****************************************************************************/
 
+#include <nuttx/ioctl.h>
+
 /****************************************************************************
  * Definitions
  ****************************************************************************/
diff --git a/nuttx/arch/x86/include/README.txt b/nuttx/arch/x86/include/README.txt
new file mode 100755
index 000000000..1f6cdeb91
--- /dev/null
+++ b/nuttx/arch/x86/include/README.txt
@@ -0,0 +1,31 @@
+arch/x86/include/README.txt

+^^^^^^^^^^^^^^^^^^^^^^^^^^^

+

+This directory holds x86-specific header files.  The top-level header files in

+arch/x86/include simply include corresponding header files from lower lower-

+level chip-specific and architecture-specific directories.

+

+Architecture-Specific Directories

+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

+

+Architecture-specific directories hold common header files for specific x86

+architectures.  Separating these header file makes it easy to manage such

+things as differences in sizeof(long) on 32- and 64-bit x86 architectures.

+

+i486

+  This directory holds definitions appropriate for any instantiation of the

+  32-bit i486 architecture.

+

+Chip-Specific directories

+^^^^^^^^^^^^^^^^^^^^^^^^^

+

+The same x86 architecture may be realized in different chip implementations.

+For SoC chips, in particular, on-chip devices and differing interrupt

+structures may require special, chip-specific definitions in these chip-

+specific directories.

+

+qemu

+  This is the implementation of NuttX on the QEMU x86 simulation.

+

+

+

diff --git a/nuttx/arch/x86/include/arch.h b/nuttx/arch/x86/include/arch.h
new file mode 100755
index 000000000..966bfbc56
--- /dev/null
+++ b/nuttx/arch/x86/include/arch.h
@@ -0,0 +1,91 @@
+/****************************************************************************
+ * arch/x86/include/arch.h
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/* This file should never be included directed but, rather, only indirectly
+ * through arch/arch.h
+ */
+
+#ifndef __ARCH_X86_INCLUDE_ARCH_H
+#define __ARCH_X86_INCLUDE_ARCH_H
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+/* Include chip-specific definitions */
+
+# include <arch/chip/arch.h>
+
+/* Include architecture-specific definitions */
+
+#ifdef CONFIG_ARCH_I486
+# include <arch/i486/arch.h>
+#endif
+
+/****************************************************************************
+ * Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Inline functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Types
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Variables
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Function Prototypes
+ ****************************************************************************/
+
+#ifdef __cplusplus
+#define EXTERN extern "C"
+extern "C" {
+#else
+#define EXTERN extern
+#endif
+
+#undef EXTERN
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __ARCH_X86_INCLUDE_ARCH_H */
diff --git a/nuttx/arch/x86/include/i486/arch.h b/nuttx/arch/x86/include/i486/arch.h
new file mode 100755
index 000000000..89901cb0a
--- /dev/null
+++ b/nuttx/arch/x86/include/i486/arch.h
@@ -0,0 +1,108 @@
+/****************************************************************************
+ * arch/x86/include/i486/arch.h
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/* This file should never be included directed but, rather,
+ * only indirectly through nuttx/arch.h
+ */
+
+#ifndef __ARCH_X86_INCLUDE_I486_ARCH_H
+#define __ARCH_X86_INCLUDE_I486_ARCH_H
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+/****************************************************************************
+ * Definitions
+ ****************************************************************************/
+
+/* FLAGS bits */
+
+#define X86_FLAGS_CF         (1 << 0)  /* Bit 0:  Carry Flag */
+                                       /* Bit 1:  Reserved */
+#define X86_FLAGS_PF         (1 << 2)  /* Bit 2:  Parity Flag */
+                                       /* Bit 3:  Reserved */
+#define X86_FLAGS_AF         (1 << 4)  /* Bit 4:  Auxillary carry Flag */
+                                       /* Bit 5:  Reserved */
+#define X86_FLAGS_ZF         (1 << 6)  /* Bit 6:  Zero Flag */
+#define X86_FLAGS_SF         (1 << 7)  /* Bit 7:  Sign Flag */
+#define X86_FLAGS_TF         (1 << 8)  /* Bit 8:  Trap Flag */
+#define X86_FLAGS_IF         (1 << 9)  /* Bit 9:  Interrupt Flag */
+#define X86_FLAGS_DF         (1 << 10) /* Bit 10: Direction Flag */
+#define X86_FLAGS_OF         (1 << 11) /* Bit 11: Overflow Flag */
+#define X86_FLAGS_IOPL_SHIFT (12)      /* Bits 12-13: IOPL mask (286+ only)*/
+#define X86_FLAGS_IOPL_MASK  (3 << X86_FLAGS_IOPL_SHIFT)
+#define X86_FLAGS_NT         (1 << 14) /* Bit 14: Nested Task */
+                                       /* Bit 15: Reserved */
+
+/* EFLAGS bits (Extend the basic FLAGS bit definitions) */
+
+#define X86_EFLAGS_RF        (1 << 16) /* Bit 16: Resume Flag (386+ only) */
+#define X86_EFLAGS_VM        (1 << 17) /* Bit 17: Virtual Mode (386+ only) */
+#define X86_EFLAGS_AC        (1 << 18) /* Bit 18: Alignment Check (486SX+ only) */
+#define X86_EFLAGS_VIF       (1 << 19) /* Bit 19: Virtual Interrupt Flag (Pentium+) */
+#define X86_EFLAGS_VIP       (1 << 20) /* Bit 20: Virtual Interrupt Pending (Pentium+) */
+#define X86_EFLAGS_ID        (1 << 21) /* Bit 21: CPUID detection flag (Pentium+) */
+
+/****************************************************************************
+ * Inline functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Types
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Variables
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Function Prototypes
+ ****************************************************************************/
+
+#ifdef __cplusplus
+#define EXTERN extern "C"
+extern "C" {
+#else
+#define EXTERN extern
+#endif
+
+#undef EXTERN
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __ARCH_X86_INCLUDE_I486_ARCH_H */
+
diff --git a/nuttx/arch/x86/include/i486/io.h b/nuttx/arch/x86/include/i486/io.h
new file mode 100644
index 000000000..7a56ef626
--- /dev/null
+++ b/nuttx/arch/x86/include/i486/io.h
@@ -0,0 +1,153 @@
+/****************************************************************************
+ * arch/x86/include/i486/io.h
+ * arch/chip/io.h
+ *
+ *   Copyright (C) 2010 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/* This file should never be included directed but, rather, only indirectly
+ * through arch/io.h
+ */
+
+#ifndef __ARCH_X86_INCLUDE_I486_IO_H
+#define __ARCH_X86_INCLUDE_I486_IO_H
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <stdint.h>
+
+/****************************************************************************
+ * Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Types
+ ****************************************************************************/
+
+ #ifndef __ASSEMBLY__
+
+/****************************************************************************
+ * Inline functions
+ ****************************************************************************/
+
+/* Standard x86 Port I/O */
+
+static inline void outb(uint8_t regval, uint16_t port)
+{
+  asm volatile(
+    "\toutb %0,%1\n"
+    :
+    : "a" (regval), "dN" (port)
+    );
+}
+
+static inline uint8_t inb(uint16_t port)
+{
+  uint8_t regval;
+  asm volatile(
+    "\tinb %1,%0\n"
+    : "=a" (regval)
+    : "dN" (port)
+  );
+  return regval;
+}
+
+static inline void outw(uint16_t regval, uint16_t port)
+{
+  asm volatile(
+    "\toutw %0,%1\n"
+    :
+    : "a" (regval), "dN" (port)
+    );
+}
+
+static inline uint16_t inw(uint16_t port)
+{
+  uint16_t regval;
+
+  asm volatile(
+    "\tinw %1,%0\n"
+    : "=a" (regval)
+    : "dN" (port)
+    );
+  return regval;
+}
+
+static inline void outl(uint32_t regval, uint16_t port)
+{
+  asm volatile(
+    "\toutl %0,%1\n"
+    :
+    : "a" (regval), "dN" (port)
+    );
+}
+
+static inline uint32_t inl(uint32_t port)
+{
+  uint32_t regval;
+  asm volatile(
+    "\tinl %1,%0\n"
+    : "=a" (regval)
+    : "dN" (port)
+    );
+  return regval;
+}
+
+/****************************************************************************
+ * Public Variables
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Function Prototypes
+ ****************************************************************************/
+
+#ifndef __ASSEMBLY__
+#ifdef __cplusplus
+#define EXTERN extern "C"
+extern "C" {
+#else
+#define EXTERN extern
+#endif
+
+EXTERN void outp(char p, char c);
+EXTERN char inp(char p);
+
+#undef EXTERN
+#ifdef __cplusplus
+}
+#endif
+#endif
+
+#endif /* __ASSEMBLY__ */
+#endif /* __ARCH_X86_INCLUDE_I486_IO_H */
diff --git a/nuttx/arch/x86/include/i486/irq.h b/nuttx/arch/x86/include/i486/irq.h
new file mode 100755
index 000000000..d24e335f1
--- /dev/null
+++ b/nuttx/arch/x86/include/i486/irq.h
@@ -0,0 +1,178 @@
+/****************************************************************************
+ * arch/x86/include/i486/irq.h
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/* This file should never be included directed but, rather, only indirectly
+ * through nuttx/irq.h
+ */
+
+#ifndef __ARCH_X86_INCLUDE_I486_IRQ_H
+#define __ARCH_X86_INCLUDE_I486_IRQ_H
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#ifdef __ASSEMBLY__
+#  include <stdint.h>
+#  include <stdbool.h>
+#  include <arch/arch.h>
+#endif
+
+/****************************************************************************
+ * Definitions
+ ****************************************************************************/
+
+/* Storage order: %ebx, $esi, %edi, %ebp, sp, and return PC */
+
+#ifdef __ASSEMBLY__
+# define REG_EBX (0*4)
+# define REG_ESI (1*4)
+# define REG_EDI (2*4)
+# define REG_EBP (3*4)
+# define REG_SP  (4*4)
+# define REG_PC  (5*4)
+#else
+# define REG_EBX (0)
+# define REG_ESI (1)
+# define REG_EDI (2)
+# define REG_EBP (3)
+# define REG_SP  (4)
+# define REG_PC  (5)
+#endif /* __ASSEMBLY__ */
+
+#define XCPTCONTEXT_REGS    (6)
+#define XCPTCONTEXT_SIZE    (6 * XCPTCONTEXT_REGS)
+
+/****************************************************************************
+ * Public Types
+ ****************************************************************************/
+
+/* This struct defines the way the registers are stored */
+
+#ifndef __ASSEMBLY__
+struct xcptcontext
+{
+   void *sigdeliver; /* Actual type is sig_deliver_t */
+
+   /* Storage order: %ebx, $esi, %edi, %ebp, sp, and return PC */
+
+   uint32_t regs[XCPTCONTEXT_REGS];
+};
+#endif
+
+/****************************************************************************
+ * Inline functions
+ ****************************************************************************/
+
+#ifndef __ASSEMBLY__
+
+/* Get the current FLAGS register contents */
+
+static inline irqstate_t irqflags()
+{
+  irqstate_t flags;
+
+  asm volatile(
+    "\tpushf\n"
+    "\tpop %0\n"
+    : "=rm" (flags)
+    :
+    : "memory");
+  return flags;
+}
+
+/* Get a sample of the FLAGS register, determine if interrupts are disabled */
+
+static inline bool irqdisabled(irqstate_t flags)
+{
+  return ((flags & X86_FLAGS_IF) == 0);
+}
+
+/* Disable interrupts unconditionally */
+
+static inline void irqdisable(void)
+{
+  asm volatile("cli": : :"memory");
+}
+
+/* Enable interrupts unconditionally */
+
+static inline void irqenable(void)
+{
+  asm volatile("sti": : :"memory");
+}
+
+/* Disable interrupts, but return previous interrupt state */
+
+static inline irqstate_t irqsave(void)
+{
+  irqstate_t flags = irqflags();
+  irqdisable();
+  return flags;
+}
+
+/* Conditionally disable interrupts */
+
+static inline void irqrestore(irqstate_t flags)
+{
+  if (irqdisabled(flags))
+    {
+      irqdisable();
+    }
+}
+
+/****************************************************************************
+ * Public Variables
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Function Prototypes
+ ****************************************************************************/
+
+#ifdef __cplusplus
+#define EXTERN extern "C"
+extern "C" {
+#else
+#define EXTERN extern
+#endif
+
+#undef EXTERN
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __ASSEMBLY__ */
+#endif /* __ARCH_X86_INCLUDE_I486_IRQ_H */
+
diff --git a/nuttx/arch/x86/include/i486/limits.h b/nuttx/arch/x86/include/i486/limits.h
new file mode 100755
index 000000000..ac0755ef9
--- /dev/null
+++ b/nuttx/arch/x86/include/i486/limits.h
@@ -0,0 +1,81 @@
+/****************************************************************************
+ * arch/x86/include/i486/limits.h
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#ifndef __ARCH_X86_INCLUDE_I486_LIMITS_H 
+#define __ARCH_X86_INCLUDE_I486_LIMITS_H 
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+/****************************************************************************
+ * Definitions
+ ****************************************************************************/
+
+#define CHAR_BIT    8
+#define SCHAR_MIN   0x80
+#define SCHAR_MAX   0x7f
+#define UCHAR_MAX   0xff
+
+/* These could be different on machines where char is unsigned */
+
+#define CHAR_MIN    SCHAR_MIN
+#define CHAR_MAX    SCHAR_MAX
+
+#define SHRT_MIN    0x8000
+#define SHRT_MAX    0x7fff
+#define USHRT_MAX   0xffff
+
+#define INT_MIN     0x80000000
+#define INT_MAX     0x7fffffff
+#define UINT_MAX    0xffffffff
+
+/* These change on 32-bit and 64-bit platforms */
+
+#define LONG_MAX    0x80000000
+#define LONG_MIN    0x7fffffff
+#define ULONG_MAX   0xffffffff
+
+#define LLONG_MAX   0x8000000000000000
+#define LLONG_MIN   0x7fffffffffffffff
+#define ULLONG_MAX  0xffffffffffffffff
+
+/* A pointer is 4 bytes */
+
+#define PTR_MIN     0x80000000
+#define PTR_MAX     0x7fffffff
+#define UPTR_MAX    0xffffffff
+
+#endif /* __ARCH_X86_INCLUDE_I486_LIMITS_H  */
diff --git a/nuttx/arch/x86/include/i486/types.h b/nuttx/arch/x86/include/i486/types.h
new file mode 100755
index 000000000..88379fd0f
--- /dev/null
+++ b/nuttx/arch/x86/include/i486/types.h
@@ -0,0 +1,97 @@
+/************************************************************************
+ * arch/x86/include/i486/types.h
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************/
+
+/* This file should never be included directed but, rather, only
+ * indirectly through arch/types.h (which is, in turn only accessed
+ * through sys/types.h or stdint.h).
+ */
+
+#ifndef __ARCH_X86_INCLUDE_I486_TYPES_H
+#define __ARCH_X86_INCLUDE_I486_TYPES_H
+
+/************************************************************************
+ * Included Files
+ ************************************************************************/
+
+/************************************************************************
+ * Definitions
+ ************************************************************************/
+
+/************************************************************************
+ * Type Declarations
+ ************************************************************************/
+
+#ifndef __ASSEMBLY__
+
+/* These are the sizes of the standard integer types.  NOTE that these type
+ * names have a leading underscore character.  This file will be included
+ * (indirectly) by include/stdint.h and typedef'ed to the final name without
+ * the underscore character.  This roundabout way of doings things allows
+ * the stdint.h to be removed from the include/ directory in the event that
+ * the user prefers to use the definitions provided by their toolchain header
+ * files
+ */
+
+typedef char               _int8_t;
+typedef unsigned char      _uint8_t;
+
+typedef short              _int16_t;
+typedef unsigned short     _uint16_t;
+
+typedef int                _int32_t;
+typedef unsigned int       _uint32_t;
+
+typedef long long          _int64_t;
+typedef unsigned long long _uint64_t;
+#define __INT64_DEFINED
+
+/* A pointer is 4 bytes */
+
+typedef unsigned int       _intptr_t;
+typedef unsigned int       _uintptr_t;
+
+/* This is the size of the interrupt state save returned by
+ * irqsave()
+ */
+
+typedef unsigned int       irqstate_t;
+
+#endif /* __ASSEMBLY__ */
+
+/************************************************************************
+ * Global Function Prototypes
+ ************************************************************************/
+
+#endif /* __ARCH_X86_INCLUDE_I486_TYPES_H */
diff --git a/nuttx/arch/x86/include/io.h b/nuttx/arch/x86/include/io.h
new file mode 100755
index 000000000..4f88932c5
--- /dev/null
+++ b/nuttx/arch/x86/include/io.h
@@ -0,0 +1,86 @@
+/****************************************************************************
+ * arch/x86/include/io.h
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#ifndef __ARCH_X86_INCLUDE_IO_H
+#define __ARCH_X86_INCLUDE_IO_H
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+/* Include architecture-specific IO definitions (These are probably common
+ * across all architectures, but this gives a little bit of flexibility).
+ */
+
+#ifdef CONFIG_ARCH_I486
+# include <arch/i486/io.h>
+#endif
+
+/****************************************************************************
+ * Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Types
+ ****************************************************************************/
+
+/****************************************************************************
+ * Inline functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Variables
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Function Prototypes
+ ****************************************************************************/
+
+#ifndef __ASSEMBLY__
+#ifdef __cplusplus
+#define EXTERN extern "C"
+extern "C" {
+#else
+#define EXTERN extern
+#endif
+
+#undef EXTERN
+#ifdef __cplusplus
+}
+#endif
+#endif
+
+#endif /* __ARCH_X86_INCLUDE_IO_H */
+
diff --git a/nuttx/arch/x86/include/irq.h b/nuttx/arch/x86/include/irq.h
new file mode 100755
index 000000000..97c8c0f9c
--- /dev/null
+++ b/nuttx/arch/x86/include/irq.h
@@ -0,0 +1,98 @@
+/****************************************************************************
+ * arch/x86/include/irq.h
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/* This file should never be included directed but, rather, only indirectly
+ * through nuttx/irq.h
+ */
+
+#ifndef __ARCH_X86_INCLUDE_IRQ_H
+#define __ARCH_X86_INCLUDE_IRQ_H
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+/* Include NuttX-specific IRQ definitions */
+
+#include <nuttx/irq.h>
+
+/* Include chip-specific IRQ definitions (including IRQ numbers) */
+
+#include <arch/chip/irq.h>
+
+/* Include architecture-specific IRQ definitions (including register save
+ * structure and irqsave()/irqrestore() macros).
+ */
+
+#ifdef CONFIG_ARCH_I486
+# include <arch/i486/irq.h>
+#endif
+
+/****************************************************************************
+ * Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Types
+ ****************************************************************************/
+
+/****************************************************************************
+ * Inline functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Variables
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Function Prototypes
+ ****************************************************************************/
+
+#ifndef __ASSEMBLY__
+#ifdef __cplusplus
+#define EXTERN extern "C"
+extern "C" {
+#else
+#define EXTERN extern
+#endif
+
+#undef EXTERN
+#ifdef __cplusplus
+}
+#endif
+#endif
+
+#endif /* __ARCH_X86_INCLUDE_IRQ_H */
+
diff --git a/nuttx/arch/x86/include/limits.h b/nuttx/arch/x86/include/limits.h
new file mode 100755
index 000000000..729504edd
--- /dev/null
+++ b/nuttx/arch/x86/include/limits.h
@@ -0,0 +1,53 @@
+/****************************************************************************
+ * arch/x86/include/limits.h
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#ifndef __ARCH_X86_INCLUDE_LIMITS_H
+#define __ARCH_X86_INCLUDE_LIMITS_H
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+/* Include architecture-specific limits */
+
+#ifdef CONFIG_ARCH_I486
+# include <arch/i486/limits.h>
+#endif
+
+/****************************************************************************
+ * Definitions
+ ****************************************************************************/
+
+#endif /* __ARCH_X86_INCLUDE_LIMITS_H */
diff --git a/nuttx/arch/x86/include/qemu/arch.h b/nuttx/arch/x86/include/qemu/arch.h
new file mode 100755
index 000000000..fc2a7278b
--- /dev/null
+++ b/nuttx/arch/x86/include/qemu/arch.h
@@ -0,0 +1,80 @@
+/****************************************************************************
+ * arch/x86/include/qemu/arch.h
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/* This file should never be included directed but, rather,
+ * only indirectly through nuttx/arch.h
+ */
+
+#ifndef __ARCH_X86_INCLUDE_QEMU_ARCH_H
+#define __ARCH_X86_INCLUDE_QEMU_ARCH_H
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+/****************************************************************************
+ * Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Inline functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Types
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Variables
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Function Prototypes
+ ****************************************************************************/
+
+#ifdef __cplusplus
+#define EXTERN extern "C"
+extern "C" {
+#else
+#define EXTERN extern
+#endif
+
+#undef EXTERN
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __ARCH_X86_INCLUDE_QEMU_ARCH_H */
+
diff --git a/nuttx/arch/x86/include/qemu/irq.h b/nuttx/arch/x86/include/qemu/irq.h
new file mode 100755
index 000000000..a39876bc6
--- /dev/null
+++ b/nuttx/arch/x86/include/qemu/irq.h
@@ -0,0 +1,82 @@
+/****************************************************************************
+ * arch/x86/include/qemu/irq.h
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/* This file should never be included directed but, rather,
+ * only indirectly through nuttx/irq.h
+ */
+
+#ifndef __ARCH_X86_INCLUDE_QEMU_IRQ_H
+#define __ARCH_X86_INCLUDE_QEMU_IRQ_H
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+/****************************************************************************
+ * Definitions
+ ****************************************************************************/
+
+#define NR_IRQS 0
+
+/****************************************************************************
+ * Public Types
+ ****************************************************************************/
+
+/****************************************************************************
+ * Inline functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Variables
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Function Prototypes
+ ****************************************************************************/
+
+#ifdef __cplusplus
+#define EXTERN extern "C"
+extern "C" {
+#else
+#define EXTERN extern
+#endif
+
+#undef EXTERN
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __ARCH_X86_INCLUDE_QEMU_IRQ_H */
+
diff --git a/nuttx/arch/x86/include/types.h b/nuttx/arch/x86/include/types.h
new file mode 100755
index 000000000..112de8525
--- /dev/null
+++ b/nuttx/arch/x86/include/types.h
@@ -0,0 +1,65 @@
+/****************************************************************************
+ * arch/x86/include/types.h
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/* This file should never be included directed but, rather, only indirectly
+ * through sys/types.h
+ */
+
+#ifndef __ARCH_X86_INCLUDE_TYPES_H
+#define __ARCH_X86_INCLUDE_TYPES_H
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+/* Include architecture-specific limits */
+
+#ifdef CONFIG_ARCH_I486
+# include <arch/i486/types.h>
+#endif
+
+/****************************************************************************
+ * Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Type Declarations
+ ****************************************************************************/
+
+/****************************************************************************
+ * Global Function Prototypes
+ ****************************************************************************/
+
+#endif /* __ARCH_X86_INCLUDE_TYPES_H */
diff --git a/nuttx/arch/x86/src/Makefile b/nuttx/arch/x86/src/Makefile
new file mode 100644
index 000000000..9281828bb
--- /dev/null
+++ b/nuttx/arch/x86/src/Makefile
@@ -0,0 +1,143 @@
+############################################################################
+# arch/x86/src/Makefile
+#
+#   Copyright (C) 2010 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+-include $(TOPDIR)/Make.defs
+-include chip/Make.defs
+
+ARCH_SRCDIR	= $(TOPDIR)/arch/$(CONFIG_ARCH)/src
+ifeq ($(CONFIG_ARCH_I486),y)
+ARCH_SUBDIR	= i486
+endif
+
+ifeq ($(WINTOOL),y)
+  NUTTX		= "${shell cygpath -w $(TOPDIR)/nuttx}"
+  CFLAGS	+= -I "${shell cygpath -w $(ARCH_SRCDIR)/chip}" \
+  		   -I "${shell cygpath -w $(ARCH_SRCDIR)/common}" \
+		   -I "${shell cygpath -w $(ARCH_SRCDIR)/$(ARCH_SUBDIR)}" \
+		   -I "${shell cygpath -w $(TOPDIR)/sched}"
+else
+  NUTTX		= $(TOPDIR)/nuttx
+  CFLAGS	+= -I$(ARCH_SRCDIR)/chip -I$(ARCH_SRCDIR)/common \
+		   -I$(ARCH_SRCDIR)/$(ARCH_SUBDIR) -I$(TOPDIR)/sched
+endif
+
+HEAD_AOBJ	= $(HEAD_ASRC:.S=$(OBJEXT))
+
+ASRCS		= $(CHIP_ASRCS) $(CMN_ASRCS)
+AOBJS		= $(ASRCS:.S=$(OBJEXT))
+
+CSRCS		= $(CHIP_CSRCS) $(CMN_CSRCS)
+COBJS		= $(CSRCS:.c=$(OBJEXT))
+
+SRCS		= $(ASRCS) $(CSRCS)
+OBJS		= $(AOBJS) $(COBJS)
+
+LDFLAGS		= $(ARCHSCRIPT)
+EXTRA_LIBS	=
+
+LINKLIBS	=
+ifeq ($(WINTOOL),y)
+  LIBPATHS	= ${shell for path in $(LINKLIBS); do dir=`dirname $(TOPDIR)/$$path`;echo "-L\"`cygpath -w $$dir`\"";done}
+  LIBPATHS	+= -L"${shell cygpath -w $(BOARDDIR)}"
+else
+  LIBPATHS	= $(addprefix -L$(TOPDIR)/,$(dir $(LINKLIBS)))
+  LIBPATHS	+= -L"$(BOARDDIR)"
+endif
+LDLIBS		= $(patsubst lib%,-l%,$(basename $(notdir $(LINKLIBS))))
+
+BOARDDIR	= $(TOPDIR)/arch/$(CONFIG_ARCH)/src/board
+
+LIBGCC		= "${shell $(CC) -print-libgcc-file-name}"
+
+VPATH		= chip:common:$(ARCH_SUBDIR)
+
+all: $(HEAD_OBJ) libarch$(LIBEXT)
+
+$(AOBJS) $(HEAD_AOBJ): %$(OBJEXT): %.S
+	$(call ASSEMBLE, $<, $@)
+
+$(COBJS): %$(OBJEXT): %.c
+	$(call COMPILE, $<, $@)
+
+libarch$(LIBEXT): $(OBJS)
+	@( for obj in $(OBJS) ; do \
+		$(call ARCHIVE, $@, $${obj}); \
+	done ; )
+
+board/libboard$(LIBEXT):
+	@$(MAKE) -C board TOPDIR="$(TOPDIR)" libboard$(LIBEXT)
+
+nuttx: $(HEAD_AOBJ) board/libboard$(LIBEXT)
+	@echo "LD: nuttx"
+	@$(LD) --entry=__start $(LDFLAGS) $(LIBPATHS) -o $(NUTTX)$(EXEEXT) $(HEAD_AOBJ) $(EXTRA_OBJS) \
+		--start-group $(LDLIBS) -lboard --end-group $(EXTRA_LIBS) $(LIBGCC)
+ifeq ($(CONFIG_BOOT_RUNFROMFLASH),y)
+	@export flashloc=`$(OBJDUMP) --all-headers $(NUTTX)$(EXEEXT) | grep _eronly | cut -d' ' -f1`;  \
+	$(OBJCOPY) $(OBJCOPYARGS) --adjust-section-vma=.data=0x$$flashloc $(NUTTX)$(EXEEXT) $(NUTTX).flashimage
+	@mv $(NUTTX).flashimage $(NUTTX)$(EXEEXT)
+endif
+	@$(NM) $(NUTTX)$(EXEEXT) | \
+	grep -v '\(compiled\)\|\(\$(OBJEXT)$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
+	sort > $(TOPDIR)/System.map
+	@export vflashstart=`$(OBJDUMP) --all-headers $(NUTTX)$(EXEEXT) | grep _vflashstart | cut -d' ' -f1`;  \
+	if [ ! -z "$$vflashstart" ]; then \
+		$(OBJCOPY) $(OBJCOPYARGS) --adjust-section-vma=.vector=0x$$vflashstart $(NUTTX)$(EXEEXT) $(NUTTX).flashimage; \
+		mv $(NUTTX).flashimage $(NUTTX)$(EXEEXT); \
+	fi
+
+.depend: Makefile chip/Make.defs $(SRCS)
+	@if [ -e board/Makefile ]; then \
+		$(MAKE) -C board TOPDIR="$(TOPDIR)" depend ; \
+	fi
+	@$(MKDEP) --dep-path chip --dep-path common --dep-path $(ARCH_SUBDIR) \
+	 $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep
+	@touch $@
+
+depend: .depend
+
+clean:
+	@if [ -e board/Makefile ]; then \
+		$(MAKE) -C board TOPDIR="$(TOPDIR)" clean ; \
+	fi
+	@rm -f libarch$(LIBEXT) *~ .*.swp
+	$(call CLEAN)
+
+distclean: clean
+	@if [ -e board/Makefile ]; then \
+		$(MAKE) -C board TOPDIR="$(TOPDIR)" distclean ; \
+	fi
+	@rm -f Make.dep .depend
+
+-include Make.dep
diff --git a/nuttx/arch/x86/src/README.txt b/nuttx/arch/x86/src/README.txt
new file mode 100755
index 000000000..1b0c0590b
--- /dev/null
+++ b/nuttx/arch/x86/src/README.txt
@@ -0,0 +1,31 @@
+arch/x86/src/README.txt

+^^^^^^^^^^^^^^^^^^^^^^^

+

+This directory holds x86-specific source files.  All x86 source reside in

+lower-level common, chip-specific, and architecture-specific directories.

+

+common/ Directory

+^^^^^^^^^^^^^^^^^

+

+This directory holds source files common to all x86 architectures.

+

+Architecture-Specific Directories

+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

+

+Architecture-specific directories hold common source files shared for by

+implementations of specific x86 architectures.

+

+i486

+  This directory holds logic appropriate for any instantiation of the 32-bit

+  i486 architecture.

+

+Chip-Specific directories

+^^^^^^^^^^^^^^^^^^^^^^^^^

+

+The same x86 architecture may be realized in different chip implementations.

+For SoC chips, in particular, on-chip devices and differing interrupt

+structures may require special, chip-specific definitions in these chip-

+specific directories.

+

+qemu

+  This is the implementation of NuttX on the QEMU x86 simulation.

diff --git a/nuttx/arch/x86/src/common/up_allocateheap.c b/nuttx/arch/x86/src/common/up_allocateheap.c
new file mode 100644
index 000000000..3273d681f
--- /dev/null
+++ b/nuttx/arch/x86/src/common/up_allocateheap.c
@@ -0,0 +1,82 @@
+/****************************************************************************
+ * arch/x86/src/common/up_allocateheap.c
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <sys/types.h>
+#include <debug.h>
+
+#include <nuttx/arch.h>
+#include <arch/board/board.h>
+
+#include "up_arch.h"
+#include "up_internal.h"
+
+/****************************************************************************
+ * Private Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: up_allocate_heap
+ *
+ * Description:
+ *   The heap may be statically allocated by defining CONFIG_HEAP_BASE and
+ *   CONFIG_HEAP_SIZE.  If these are not defined, then this function will be
+ *   called to dynamically set aside the heap region.
+ *
+ ****************************************************************************/
+
+void up_allocate_heap(FAR void **heap_start, size_t *heap_size)
+{
+  up_ledon(LED_HEAPALLOCATE);
+  *heap_start = (FAR void*)g_heapbase;
+  *heap_size = CONFIG_DRAM_END - g_heapbase;
+}
diff --git a/nuttx/arch/x86/src/common/up_arch.h b/nuttx/arch/x86/src/common/up_arch.h
new file mode 100644
index 000000000..96d49d306
--- /dev/null
+++ b/nuttx/arch/x86/src/common/up_arch.h
@@ -0,0 +1,90 @@
+/****************************************************************************
+ * arch/x86/src/common/up_arch.h
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#ifndef ___ARCH_X86_SRC_COMMON_UP_ARCH_H
+#define ___ARCH_X86_SRC_COMMON_UP_ARCH_H
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+#ifndef __ASSEMBLY__
+# include <stdint.h>
+#endif
+#include <arch/io.h>
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Inline Functions
+ ****************************************************************************/
+
+#ifndef __ASSEMBLY__
+
+# define getreg8(p)           inb(p)
+# define putreg8(v,p)         outb(v,p)
+# define getreg16(p)          inw(p)
+# define putreg16(v,p)        outw(v,p)
+# define getreg32(p)          inl(p)
+# define putreg32(v,p)        outl(v,p)
+
+/****************************************************************************
+ * Public Function Prototypes
+ ****************************************************************************/
+
+#undef EXTERN
+#if defined(__cplusplus)
+#define EXTERN extern "C"
+extern "C" {
+#else
+#define EXTERN extern
+#endif
+
+/* Atomic modification of registers */
+
+EXTERN void modifyreg8(unsigned int addr, uint8_t clearbits, uint8_t setbits);
+EXTERN void modifyreg16(unsigned int addr, uint16_t clearbits, uint16_t setbits);
+EXTERN void modifyreg32(unsigned int addr, uint32_t clearbits, uint32_t setbits);
+
+#undef EXTERN
+#if defined(__cplusplus)
+}
+#endif
+
+#endif /* __ASSEMBLY__ */
+#endif  /* ___ARCH_X86_SRC_COMMON_UP_ARCH_H */
diff --git a/nuttx/arch/x86/src/common/up_exit.c b/nuttx/arch/x86/src/common/up_exit.c
new file mode 100644
index 000000000..ceca72c87
--- /dev/null
+++ b/nuttx/arch/x86/src/common/up_exit.c
@@ -0,0 +1,174 @@
+/****************************************************************************
+ * common/up_exit.c
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <sched.h>
+#include <debug.h>
+#include <nuttx/arch.h>
+
+#include "os_internal.h"
+#include "up_internal.h"
+
+#ifdef CONFIG_DUMP_ON_EXIT
+#include <nuttx/fs.h>
+#endif
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: _up_dumponexit
+ *
+ * Description:
+ *   Dump the state of all tasks whenever on task exits.  This is debug
+ *   instrumentation that was added to check file-related reference counting
+ *   but could be useful again sometime in the future.
+ *
+ ****************************************************************************/
+
+#if defined(CONFIG_DUMP_ON_EXIT) && defined(CONFIG_DEBUG)
+static void _up_dumponexit(FAR _TCB *tcb, FAR void *arg)
+{
+#if CONFIG_NFILE_DESCRIPTORS > 0 || CONFIG_NFILE_STREAMS > 0
+  int i;
+#endif
+
+  sdbg("  TCB=%p name=%s pid=%d\n", tcb, tcb->argv[0], tcb->pid);
+  sdbg("    priority=%d state=%d\n", tcb->sched_priority, tcb->task_state);
+
+#if CONFIG_NFILE_DESCRIPTORS > 0
+  if (tcb->filelist)
+    {
+      sdbg("    filelist refcount=%d\n",
+           tcb->filelist->fl_crefs);
+
+      for (i = 0; i < CONFIG_NFILE_DESCRIPTORS; i++)
+        {
+          struct inode *inode = tcb->filelist->fl_files[i].f_inode;
+          if (inode)
+            {
+              sdbg("      fd=%d refcount=%d\n",
+                   i, inode->i_crefs);
+            }
+        }
+    }
+#endif
+
+#if CONFIG_NFILE_STREAMS > 0
+  if (tcb->streams)
+    {
+      sdbg("    streamlist refcount=%d\n",
+           tcb->streams->sl_crefs);
+
+      for (i = 0; i < CONFIG_NFILE_STREAMS; i++)
+        {
+          struct file_struct *filep = &tcb->streams->sl_streams[i];
+          if (filep->fs_filedes >= 0)
+            {
+#if CONFIG_STDIO_BUFFER_SIZE > 0
+              sdbg("      fd=%d nbytes=%d\n",
+                   filep->fs_filedes,
+                  filep->fs_bufpos - filep->fs_bufstart);
+#else
+              sdbg("      fd=%d\n", filep->fs_filedes);
+#endif
+            }
+        }
+    }
+#endif
+}
+#endif
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: _exit
+ *
+ * Description:
+ *   This function causes the currently executing task to cease to exist.
+ *   This is a special case of task_delete() where the task to be deleted is
+ *   the currently executing task.  It is more complex because a context
+ *   switch must be perform to the next ready to run task.
+ *
+ ****************************************************************************/
+
+void _exit(int status)
+{
+  _TCB* tcb;
+
+  /* Disable interrupts.  They will be restored when the next
+   * task is started.
+   */
+
+  (void)irqsave();
+
+  slldbg("TCB=%p exitting\n", g_readytorun.head);
+
+#if defined(CONFIG_DUMP_ON_EXIT) && defined(CONFIG_DEBUG)
+  slldbg("Other tasks:\n");
+  sched_foreach(_up_dumponexit, NULL);
+#endif
+
+  /* Destroy the task at the head of the ready to run list. */
+
+  (void)task_deletecurrent();
+
+  /* Now, perform the context switch to the new ready-to-run task at the
+   * head of the list.
+   */
+
+  tcb = (_TCB*)g_readytorun.head;
+
+  /* Then switch contexts */
+
+  up_fullcontextrestore(tcb->xcp.regs);
+}
+
diff --git a/nuttx/arch/x86/src/common/up_initialize.c b/nuttx/arch/x86/src/common/up_initialize.c
new file mode 100644
index 000000000..9ce9523ed
--- /dev/null
+++ b/nuttx/arch/x86/src/common/up_initialize.c
@@ -0,0 +1,168 @@
+/****************************************************************************
+ * arch/x86/src/common/up_initialize.c
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <debug.h>
+
+#include <nuttx/arch.h>
+#include <nuttx/fs.h>
+#include <arch/board/board.h>
+
+#include "up_arch.h"
+#include "up_internal.h"
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Types
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: up_calibratedelay
+ *
+ * Description:
+ *   Delay loops are provided for short timing loops.  This function, if
+ *   enabled, will just wait for 100 seconds.  Using a stopwatch, you can
+ *   can then determine if the timing loops are properly calibrated.
+ *
+ ****************************************************************************/
+
+#if defined(CONFIG_ARCH_CALIBRATION) && defined(CONFIG_DEBUG)
+static void up_calibratedelay(void)
+{
+  int i;
+  lldbg("Beginning 100s delay\n");
+  for (i = 0; i < 100; i++)
+    {
+      up_mdelay(1000);
+    }
+  lldbg("End 100s delay\n");
+}
+#else
+# define up_calibratedelay()
+#endif
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: up_initialize
+ *
+ * Description:
+ *   up_initialize will be called once during OS initialization after the
+ *   basic OS services have been initialized.  The architecture specific
+ *   details of initializing the OS will be handled here.  Such things as
+ *   setting up interrupt service routines, starting the clock, and
+ *   registering device drivers are some of the things that are different
+ *   for each processor and hardware platform.
+ *
+ *   up_initialize is called after the OS initialized but before the user
+ *   initialization logic has been started and before the libraries have
+ *   been initialized.  OS services and driver services are available.
+ *
+ ****************************************************************************/
+
+void up_initialize(void)
+{
+  /* Initialize global variables */
+
+  current_regs = NULL;
+
+  /* Calibrate the timing loop */
+
+  up_calibratedelay();
+
+  /* Add any extra memory fragments to the memory manager */
+
+  up_addregion();
+
+  /* Initialize the interrupt subsystem */
+
+  up_irqinitialize();
+
+  /* Initialize the DMA subsystem if the weak function stm32_dmainitialize has been
+   * brought into the build
+   */
+
+#ifdef CONFIG_ARCH_DMA
+#ifdef CONFIG_HAVE_WEAKFUNCTIONS
+  if (up_dmainitialize)
+#endif
+    {
+      up_dmainitialize();
+    }
+#endif
+
+  /* Initialize the system timer interrupt */
+
+#if !defined(CONFIG_SUPPRESS_INTERRUPTS) && !defined(CONFIG_SUPPRESS_TIMER_INTS)
+  up_timerinit();
+#endif
+
+  /* Register devices */
+
+#if CONFIG_NFILE_DESCRIPTORS > 0
+  devnull_register();   /* Standard /dev/null */
+#endif
+
+  /* Initialize the serial device driver */
+
+#ifdef CONFIG_USE_SERIALDRIVER
+  up_serialinit();
+#elif defined(CONFIG_DEV_LOWCONSOLE)
+  lowconsole_init();
+#endif
+
+  /* Initialize the netwok */
+
+  up_netinitialize();
+
+  /* Initialize USB -- device and/or host */
+
+  up_usbinitialize();
+  up_ledon(LED_IRQSENABLED);
+}
diff --git a/nuttx/arch/x86/src/common/up_internal.h b/nuttx/arch/x86/src/common/up_internal.h
new file mode 100644
index 000000000..9730c3372
--- /dev/null
+++ b/nuttx/arch/x86/src/common/up_internal.h
@@ -0,0 +1,258 @@
+/****************************************************************************
+ * arch/x86/src/common/up_internal.h
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#ifndef __ARCH_X86_SRC_COMMON_UP_INTERNAL_H
+#define __ARCH_X86_SRC_COMMON_UP_INTERNAL_H
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#ifndef __ASSEMBLY__
+#  include <stdint.h>
+#endif
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+/* Bring-up debug configurations.  These are here (vs defconfig) because
+ * these should only be controlled during low level board bring-up and not
+ * part of normal platform configuration.
+ */
+
+#undef  CONFIG_SUPPRESS_INTERRUPTS    /* DEFINED: Do not enable interrupts */
+#undef  CONFIG_SUPPRESS_TIMER_INTS    /* DEFINED: No timer */
+#undef  CONFIG_SUPPRESS_SERIAL_INTS   /* DEFINED: Console will poll */
+#undef  CONFIG_SUPPRESS_UART_CONFIG   /* DEFINED: Do not reconfig UART */
+#undef  CONFIG_DUMP_ON_EXIT           /* DEFINED: Dump task state on exit */
+
+/* Determine which (if any) console driver to use */
+
+#if CONFIG_NFILE_DESCRIPTORS == 0 || defined(CONFIG_DEV_LOWCONSOLE)
+#  undef CONFIG_USE_SERIALDRIVER
+#  undef CONFIG_USE_EARLYSERIALINIT
+#elif defined(CONFIG_DEV_CONSOLE) && CONFIG_NFILE_DESCRIPTORS > 0
+#  define CONFIG_USE_SERIALDRIVER 1
+#  define CONFIG_USE_EARLYSERIALINIT 1
+#endif
+
+/* Check if an interrupt stack size is configured */
+
+#ifndef CONFIG_ARCH_INTERRUPTSTACK
+# define CONFIG_ARCH_INTERRUPTSTACK 0
+#endif
+
+/* Macros to handle saving and restore interrupt state.  In the current
+ * model, the state is copied from the stack to the TCB, but only a
+ * referenced is passed to get the state from the TCB.
+ */
+
+#define up_savestate(regs)    up_copystate(regs, current_regs)
+#define up_restorestate(regs) (current_regs = regs)
+
+/****************************************************************************
+ * Public Types
+ ****************************************************************************/
+
+#ifndef __ASSEMBLY__
+typedef void (*up_vector_t)(void);
+#endif
+
+/****************************************************************************
+ * Public Variables
+ ****************************************************************************/
+
+#ifndef __ASSEMBLY__
+/* This holds a references to the current interrupt level register storage
+ * structure.  If is non-NULL only during interrupt processing.
+ */
+
+extern uint32_t *current_regs;
+
+/* This is the beginning of heap as provided from up_head.S. This is the first
+ * address in DRAM after the loaded program+bss+idle stack.  The end of the
+ * heap is CONFIG_DRAM_END
+ */
+
+extern uint32_t g_heapbase;
+
+/* Address of the saved user stack pointer */
+
+#if CONFIG_ARCH_INTERRUPTSTACK > 3
+extern uint32_t g_userstack;
+#endif
+
+/* These 'addresses' of these values are setup by the linker script.  They are
+ * not actual uint32_t storage locations! They are only used meaningfully in the
+ * following way:
+ *
+ *  - The linker script defines, for example, the symbol_sdata.
+ *  - The declareion extern uint32_t _sdata; makes C happy.  C will believe
+ *    that the value _sdata is the address of a uint32_t variable _data (it is
+ *    not!).
+ *  - We can recoved the linker value then by simply taking the address of
+ *    of _data.  like:  uint32_t *pdata = &_sdata;
+ */
+
+extern uint32_t _stext;           /* Start of .text */
+extern uint32_t _etext;           /* End_1 of .text + .rodata */
+extern const uint32_t _eronly;    /* End+1 of read only section (.text + .rodata) */
+extern uint32_t _sdata;           /* Start of .data */
+extern uint32_t _edata;           /* End+1 of .data */
+extern uint32_t _sbss;            /* Start of .bss */
+extern uint32_t _ebss;            /* End+1 of .bss */
+#endif
+
+/****************************************************************************
+ * Inline Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+#ifndef __ASSEMBLY__
+
+/* Defined in files with the same name as the function */
+
+extern void up_boot(void);
+extern void up_copystate(uint32_t *dest, uint32_t *src);
+extern void up_decodeirq(uint32_t *regs);
+extern void up_irqinitialize(void);
+#ifdef CONFIG_ARCH_DMA
+extern void weak_function up_dmainitialize(void);
+#endif
+extern int  up_saveusercontext(uint32_t *saveregs);
+extern void up_fullcontextrestore(uint32_t *restoreregs) __attribute__ ((noreturn));
+extern void up_switchcontext(uint32_t *saveregs, uint32_t *restoreregs);
+extern void up_sigdeliver(void);
+extern int  up_timerisr(int irq, uint32_t *regs);
+extern void up_lowputc(char ch);
+extern void up_puts(const char *str);
+extern void up_lowputs(const char *str);
+
+extern void up_doirq(int irq, uint32_t *regs);
+#ifdef CONFIG_PAGING
+extern void up_pginitialize(void);
+extern uint32_t *up_va2pte(uintptr_t vaddr);
+extern void up_dataabort(uint32_t *regs, uint32_t far, uint32_t fsr);
+#else /* CONFIG_PAGING */
+# define up_pginitialize()
+extern void up_dataabort(uint32_t *regs);
+#endif /* CONFIG_PAGING */
+extern void up_prefetchabort(uint32_t *regs);
+extern void up_syscall(uint32_t *regs);
+extern void up_undefinedinsn(uint32_t *regs);
+
+/* Defined in up_vectors.S */
+
+extern void up_vectorundefinsn(void);
+extern void up_vectorswi(void);
+extern void up_vectorprefetch(void);
+extern void up_vectordata(void);
+extern void up_vectoraddrexcptn(void);
+extern void up_vectorirq(void);
+extern void up_vectorfiq(void);
+
+/* Defined in up_allocateheap.c */
+
+#if CONFIG_MM_REGIONS > 1
+void up_addregion(void);
+#else
+# define up_addregion()
+#endif
+
+/* Defined in up_serial.c */
+
+#if CONFIG_NFILE_DESCRIPTORS > 0
+extern void up_earlyserialinit(void);
+extern void up_serialinit(void);
+#else
+# define up_earlyserialinit()
+# define up_serialinit()
+#endif
+
+/* Defined in drivers/lowconsole.c */
+
+#ifdef CONFIG_DEV_LOWCONSOLE
+extern void lowconsole_init(void);
+#else
+# define lowconsole_init()
+#endif
+
+/* Defined in up_watchdog.c */
+
+extern void up_wdtinit(void);
+
+/* Defined in up_timerisr.c */
+
+extern void up_timerinit(void);
+
+/* Defined in up_irq.c */
+
+extern void up_maskack_irq(int irq);
+
+/* Defined in board/up_leds.c */
+
+#ifdef CONFIG_ARCH_LEDS
+extern void up_ledinit(void);
+extern void up_ledon(int led);
+extern void up_ledoff(int led);
+#else
+# define up_ledinit()
+# define up_ledon(led)
+# define up_ledoff(led)
+#endif
+
+/* Defined in board/up_network.c */
+
+#ifdef CONFIG_NET
+extern void up_netinitialize(void);
+#else
+# define up_netinitialize()
+#endif
+
+#ifdef CONFIG_USBDEV
+extern void up_usbinitialize(void);
+extern void up_usbuninitialize(void);
+#else
+# define up_usbinitialize()
+# define up_usbuninitialize()
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#endif  /* __ARCH_X86_SRC_COMMON_UP_INTERNAL_H */
diff --git a/nuttx/arch/x86/src/common/up_interruptcontext.c b/nuttx/arch/x86/src/common/up_interruptcontext.c
new file mode 100644
index 000000000..6fbe67989
--- /dev/null
+++ b/nuttx/arch/x86/src/common/up_interruptcontext.c
@@ -0,0 +1,72 @@
+/****************************************************************************
+ *  arch/x86/src/common/up_interruptcontext.c
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <stdbool.h>
+#include <nuttx/arch.h>
+#include <nuttx/irq.h>
+
+#include "up_internal.h"
+
+/****************************************************************************
+ * Private Types
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Function Prototypes
+ ****************************************************************************/
+
+/****************************************************************************
+ * Global Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: up_interrupt_context
+ *
+ * Description:
+ *   Return true is we are currently executing in the interrupt handler
+ *   context.
+ *
+ ****************************************************************************/
+
+bool up_interrupt_context(void)
+{
+   return current_regs != NULL;
+}
diff --git a/nuttx/arch/x86/src/common/up_lowputs.c b/nuttx/arch/x86/src/common/up_lowputs.c
new file mode 100644
index 000000000..46c8940cc
--- /dev/null
+++ b/nuttx/arch/x86/src/common/up_lowputs.c
@@ -0,0 +1,74 @@
+/****************************************************************************
+ * arch/x86/src/common/up_lowputs.c
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include "up_internal.h"
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: up_lowputs
+ *
+ * Description:
+ *   This is a low-level helper function used to support debug.
+ *
+ ****************************************************************************/
+
+void up_lowputs(const char *str)
+{
+  while(*str)
+    {
+      up_lowputc(*str++);
+    }
+}
diff --git a/nuttx/arch/x86/src/common/up_mdelay.c b/nuttx/arch/x86/src/common/up_mdelay.c
new file mode 100644
index 000000000..22fc78d04
--- /dev/null
+++ b/nuttx/arch/x86/src/common/up_mdelay.c
@@ -0,0 +1,90 @@
+/****************************************************************************
+ *  arch/x86/src/common/up_mdelay.c
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+#include <nuttx/arch.h>
+
+/****************************************************************************
+ * Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Types
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Function Prototypes
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Variables
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: up_mdelay
+ *
+ * Description:
+ *   Delay inline for the requested number of milliseconds.
+ *   *** NOT multi-tasking friendly ***
+ *
+ * ASSUMPTIONS:
+ *   The setting CONFIG_BOARD_LOOPSPERMSEC has been calibrated
+ *
+ ****************************************************************************/
+
+void up_mdelay(unsigned int milliseconds)
+{
+  volatile int i;
+  volatile int j;
+
+  for (i = 0; i < milliseconds; i++)
+    {
+      for (j = 0; j < CONFIG_BOARD_LOOPSPERMSEC; j++)
+        {
+        }
+    }
+}
diff --git a/nuttx/arch/x86/src/common/up_modifyreg16.c b/nuttx/arch/x86/src/common/up_modifyreg16.c
new file mode 100644
index 000000000..9a7ae4507
--- /dev/null
+++ b/nuttx/arch/x86/src/common/up_modifyreg16.c
@@ -0,0 +1,85 @@
+/****************************************************************************
+ * arch/x86/src/common/up_modifyreg16.c
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <stdint.h>
+#include <debug.h>
+
+#include <arch/irq.h>
+#include <nuttx/arch.h>
+
+#include "up_arch.h"
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: modifyreg16
+ *
+ * Description:
+ *   Atomically modify the specified bits in a memory mapped register
+ *
+ ****************************************************************************/
+
+void modifyreg16(unsigned int addr, uint16_t clearbits, uint16_t setbits)
+{
+  irqstate_t flags;
+  uint16_t   regval;
+
+  flags   = irqsave();
+  regval  = getreg16((uint16_t)addr);
+  regval &= ~clearbits;
+  regval |= setbits;
+  putreg16(regval, (uint16_t)addr);
+  irqrestore(flags);
+}
diff --git a/nuttx/arch/x86/src/common/up_modifyreg32.c b/nuttx/arch/x86/src/common/up_modifyreg32.c
new file mode 100644
index 000000000..c2a400335
--- /dev/null
+++ b/nuttx/arch/x86/src/common/up_modifyreg32.c
@@ -0,0 +1,85 @@
+/****************************************************************************
+ * arch/x86/src/common/up_modifyreg32.c
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <stdint.h>
+#include <debug.h>
+
+#include <arch/irq.h>
+#include <nuttx/arch.h>
+
+#include "up_arch.h"
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: modifyreg32
+ *
+ * Description:
+ *   Atomically modify the specified bits in a memory mapped register
+ *
+ ****************************************************************************/
+
+void modifyreg32(unsigned int addr, uint32_t clearbits, uint32_t setbits)
+{
+  irqstate_t flags;
+  uint32_t   regval;
+
+  flags   = irqsave();
+  regval  = getreg32((uint16_t)addr);
+  regval &= ~clearbits;
+  regval |= setbits;
+  putreg32(regval, (uint16_t)addr);
+  irqrestore(flags);
+}
diff --git a/nuttx/arch/x86/src/common/up_modifyreg8.c b/nuttx/arch/x86/src/common/up_modifyreg8.c
new file mode 100644
index 000000000..fd4031dc5
--- /dev/null
+++ b/nuttx/arch/x86/src/common/up_modifyreg8.c
@@ -0,0 +1,85 @@
+/****************************************************************************
+ * arch/x86/src/common/up_modifyreg8.c
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <stdint.h>
+#include <debug.h>
+
+#include <arch/irq.h>
+#include <nuttx/arch.h>
+
+#include "up_arch.h"
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: modifyreg8
+ *
+ * Description:
+ *   Atomically modify the specified bits in a memory mapped register
+ *
+ ****************************************************************************/
+
+void modifyreg8(unsigned int addr, uint8_t clearbits, uint8_t setbits)
+{
+  irqstate_t flags;
+  uint8_t    regval;
+
+  flags   = irqsave();
+  regval  = getreg8((uint16_t)addr);
+  regval &= ~clearbits;
+  regval |= setbits;
+  putreg8(regval, (uint16_t)addr);
+  irqrestore(flags);
+}
diff --git a/nuttx/arch/x86/src/common/up_puts.c b/nuttx/arch/x86/src/common/up_puts.c
new file mode 100644
index 000000000..58420c598
--- /dev/null
+++ b/nuttx/arch/x86/src/common/up_puts.c
@@ -0,0 +1,75 @@
+/****************************************************************************
+ * arch/x86/src/common/up_puts.c
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+#include <nuttx/arch.h>
+
+#include "up_internal.h"
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: up_puts
+ *
+ * Description:
+ *   This is a low-level helper function used to support debug.
+ *
+ ****************************************************************************/
+
+void up_puts(const char *str)
+{
+  while(*str)
+    {
+      up_putc(*str++);
+    }
+}
diff --git a/nuttx/arch/x86/src/common/up_udelay.c b/nuttx/arch/x86/src/common/up_udelay.c
new file mode 100644
index 000000000..92d3b7c16
--- /dev/null
+++ b/nuttx/arch/x86/src/common/up_udelay.c
@@ -0,0 +1,129 @@
+/****************************************************************************
+ *  arch/x86/src/common/up_udelay.c
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+#include <sys/types.h>
+#include <nuttx/arch.h>
+
+/****************************************************************************
+ * Definitions
+ ****************************************************************************/
+
+#define CONFIG_BOARD_LOOPSPER100USEC ((CONFIG_BOARD_LOOPSPERMSEC+5)/10)
+#define CONFIG_BOARD_LOOPSPER10USEC  ((CONFIG_BOARD_LOOPSPERMSEC+50)/100)
+#define CONFIG_BOARD_LOOPSPERUSEC    ((CONFIG_BOARD_LOOPSPERMSEC+500)/1000)
+
+/****************************************************************************
+ * Private Types
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Function Prototypes
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Variables
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: up_udelay
+ *
+ * Description:
+ *   Delay inline for the requested number of microseconds.  NOTE:  Because
+ *   of all of the setup, several microseconds will be lost before the actual
+ *   timing looop begins.  Thus, the delay will always be a few microseconds
+ *   longer than requested.
+ *
+ *   *** NOT multi-tasking friendly ***
+ *
+ * ASSUMPTIONS:
+ *   The setting CONFIG_BOARD_LOOPSPERMSEC has been calibrated
+ *
+ ****************************************************************************/
+
+void up_udelay(useconds_t microseconds)
+{
+  volatile int i;
+
+  /* We'll do this a little at a time because we expect that the
+   * CONFIG_BOARD_LOOPSPERUSEC is very inaccurate during to truncation in
+   * the divisions of its calculation.  We'll use the largest values that
+   * we can in order to prevent significant error buildup in the loops.
+   */
+
+  while (microseconds > 1000)
+    {
+      for (i = 0; i < CONFIG_BOARD_LOOPSPERMSEC; i++)
+        {
+        }
+      microseconds -= 1000;
+    }
+
+  while (microseconds > 100)
+    {
+      for (i = 0; i < CONFIG_BOARD_LOOPSPER100USEC; i++)
+        {
+        }
+      microseconds -= 100;
+    }
+
+  while (microseconds > 10)
+    {
+      for (i = 0; i < CONFIG_BOARD_LOOPSPER10USEC; i++)
+        {
+        }
+      microseconds -= 10;
+    }
+
+  while (microseconds > 0)
+    {
+      for (i = 0; i < CONFIG_BOARD_LOOPSPERUSEC; i++)
+        {
+        }
+      microseconds--;
+    }
+}
diff --git a/nuttx/arch/x86/src/i486/up_createstack.c b/nuttx/arch/x86/src/i486/up_createstack.c
new file mode 100644
index 000000000..842872d31
--- /dev/null
+++ b/nuttx/arch/x86/src/i486/up_createstack.c
@@ -0,0 +1,135 @@
+/****************************************************************************
+ * arch/x86/src/i486/up_createstack.c
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <sys/types.h>
+#include <stdint.h>
+#include <stdlib.h>
+#include <sched.h>
+#include <debug.h>
+
+#include <nuttx/kmalloc.h>
+#include <nuttx/arch.h>
+#include <arch/board/board.h>
+
+#include "up_arch.h"
+#include "up_internal.h"
+
+/****************************************************************************
+ * Private Types
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Function Prototypes
+ ****************************************************************************/
+
+/****************************************************************************
+ * Global Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: up_create_stack
+ *
+ * Description:
+ *   Allocate a stack for a new thread and setup up stack-related information
+ *   in the TCB.
+ *
+ *   The following TCB fields must be initialized:
+ *   adj_stack_size: Stack size after adjustment for hardware, processor,
+ *     etc.  This value is retained only for debug purposes.
+ *   stack_alloc_ptr: Pointer to allocated stack
+ *   adj_stack_ptr: Adjusted stack_alloc_ptr for HW.  The initial value of
+ *     the stack pointer.
+ *
+ * Inputs:
+ *   tcb: The TCB of new task
+ *   stack_size:  The requested stack size.  At least this much must be
+ *     allocated.
+ *
+ ****************************************************************************/
+
+int up_create_stack(_TCB *tcb, size_t stack_size)
+{
+  if (tcb->stack_alloc_ptr && tcb->adj_stack_size != stack_size)
+    {
+      sched_free(tcb->stack_alloc_ptr);
+      tcb->stack_alloc_ptr = NULL;
+    }
+
+   if (!tcb->stack_alloc_ptr)
+     {
+#ifdef CONFIG_DEBUG
+       tcb->stack_alloc_ptr = (uint32_t*)zalloc(stack_size);
+#else
+       tcb->stack_alloc_ptr = (uint32_t*)malloc(stack_size);
+#endif
+     }
+
+   if (tcb->stack_alloc_ptr)
+     {
+       size_t top_of_stack;
+       size_t size_of_stack;
+
+       /* The i486 uses a push-down stack:  the stack grows toward lower
+        * addresses in memory.  The stack pointer register, points to the
+        * lowest, valid work address (the "top" of the stack).  Items on
+        * the stack are referenced as positive word offsets from sp.
+        */
+
+       top_of_stack = (uint32_t)tcb->stack_alloc_ptr + stack_size - 4;
+
+       /* The i486 stack must be aligned at word (4 byte) boundaries. If
+        * necessary top_of_stack must be rounded down to the next boundary
+        */
+
+       top_of_stack &= ~3;
+       size_of_stack = top_of_stack - (uint32_t)tcb->stack_alloc_ptr + 4;
+
+       /* Save the adjusted stack values in the _TCB */
+
+       tcb->adj_stack_ptr  = (uint32_t*)top_of_stack;
+       tcb->adj_stack_size = size_of_stack;
+
+       up_ledon(LED_STACKCREATED);
+       return OK;
+     }
+
+   return ERROR;
+}
diff --git a/nuttx/arch/x86/src/i486/up_releasestack.c b/nuttx/arch/x86/src/i486/up_releasestack.c
new file mode 100644
index 000000000..ac93688d6
--- /dev/null
+++ b/nuttx/arch/x86/src/i486/up_releasestack.c
@@ -0,0 +1,79 @@
+/****************************************************************************
+ *  arch/x86/src/common/up_releasestack.c
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <sched.h>
+#include <debug.h>
+#include <nuttx/arch.h>
+
+#include "os_internal.h"
+#include "up_internal.h"
+
+/****************************************************************************
+ * Private Types
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Function Prototypes
+ ****************************************************************************/
+
+/****************************************************************************
+ * Global Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: up_release_stack
+ *
+ * Description:
+ *   A task has been stopped. Free all stack related resources retained in
+ *   the defunct TCB.
+ *
+ ****************************************************************************/
+
+void up_release_stack(_TCB *dtcb)
+{
+  if (dtcb->stack_alloc_ptr)
+    {
+      sched_free(dtcb->stack_alloc_ptr);
+      dtcb->stack_alloc_ptr = NULL;
+    }
+
+  dtcb->adj_stack_size = 0;
+}
diff --git a/nuttx/arch/x86/src/i486/up_usestack.c b/nuttx/arch/x86/src/i486/up_usestack.c
new file mode 100644
index 000000000..fb8ded0e1
--- /dev/null
+++ b/nuttx/arch/x86/src/i486/up_usestack.c
@@ -0,0 +1,119 @@
+/****************************************************************************
+ * arch/x86/src/common/up_usestack.c
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <sys/types.h>
+#include <stdint.h>
+#include <sched.h>
+#include <debug.h>
+
+#include <nuttx/kmalloc.h>
+#include <nuttx/arch.h>
+
+#include "up_internal.h"
+
+/****************************************************************************
+ * Private Types
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Function Prototypes
+ ****************************************************************************/
+
+/****************************************************************************
+ * Global Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: up_use_stack
+ *
+ * Description:
+ *   Setup up stack-related information in the TCB using pre-allocated stack
+ *   memory
+ *
+ *   The following TCB fields must be initialized:
+ *   adj_stack_size: Stack size after adjustment for hardware, processor,
+ *     etc.  This value is retained only for debug purposes.
+ *   stack_alloc_ptr: Pointer to allocated stack
+ *   adj_stack_ptr: Adjusted stack_alloc_ptr for HW.  The initial value of
+ *     the stack pointer.
+ *
+ * Inputs:
+ *   tcb: The TCB of new task
+ *   stack_size:  The allocated stack size.
+ *
+ ****************************************************************************/
+
+int up_use_stack(_TCB *tcb, void *stack, size_t stack_size)
+{
+  size_t top_of_stack;
+  size_t size_of_stack;
+
+  if (tcb->stack_alloc_ptr)
+    {
+      sched_free(tcb->stack_alloc_ptr);
+    }
+
+  /* Save the stack allocation */
+
+  tcb->stack_alloc_ptr = stack;
+
+  /* The i486 uses a push-down stack:  the stack grows toward loweraddresses in
+   * memory.  The stack pointer register, points to the lowest, valid work
+   * address (the "top" of the stack).  Items on the stack are referenced as
+   * positive word offsets from sp.
+   */
+
+  top_of_stack = (uint32_t)tcb->stack_alloc_ptr + stack_size - 4;
+
+  /* The i486 stack must be aligned at word (4 byte) boundaries. If necessary
+   * top_of_stack must be rounded down to the next boundary
+   */
+
+  top_of_stack &= ~3;
+  size_of_stack = top_of_stack - (uint32_t)tcb->stack_alloc_ptr + 4;
+
+  /* Save the adjusted stack values in the _TCB */
+
+  tcb->adj_stack_ptr  = (uint32_t*)top_of_stack;
+  tcb->adj_stack_size = size_of_stack;
+
+  return OK;
+}
diff --git a/nuttx/arch/x86/src/qemu/Make.defs b/nuttx/arch/x86/src/qemu/Make.defs
new file mode 100755
index 000000000..5e88c117e
--- /dev/null
+++ b/nuttx/arch/x86/src/qemu/Make.defs
@@ -0,0 +1,52 @@
+############################################################################
+# arch/x86/src/qemu/Make.defs
+#
+#   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+# The start-up, "head", file
+
+HEAD_ASRC	= qemu_head.S
+
+# Common x86 and i486 files
+
+CMN_ASRCS	= 
+CMN_CSRCS	= up_createstack.c up_mdelay.c up_udelay.c up_exit.c up_initialize.c \
+		  up_interruptcontext.c up_modifyreg8.c up_modifyreg16.c \
+		  up_modifyreg32.c up_releasestack.c up_usestack.c
+
+# Required QEMU files
+
+CHIP_ASRCS	= qemu_saveusercontext.S qemu_fullcontextrestore.S
+CHIP_CSRCS	= qemu_idle.c
+
+# Configuration-dependent QEMU files
diff --git a/nuttx/arch/x86/src/qemu/chip.h b/nuttx/arch/x86/src/qemu/chip.h
new file mode 100755
index 000000000..0cbf26cb3
--- /dev/null
+++ b/nuttx/arch/x86/src/qemu/chip.h
@@ -0,0 +1,74 @@
+/************************************************************************************
+ * arch/x86/src/qemu/chip.h
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+#ifndef __ARCH_X86_SRC_QEMU_QEMU_CHIP_H
+#define __ARCH_X86_SRC_QEMU_QEMU_CHIP_H
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+
+/************************************************************************************
+ * Pre-processor Definitions
+ ************************************************************************************/
+
+/* Get customizations for each supported QEMU emulation */
+
+#ifdef CONFIG_ARCH_CHIP_QEMU
+#else
+#  error "Unsupported STM32 chip"
+#endif
+
+/* Include only the memory map.  Other chip hardware files should then include this
+ * file for the proper setup
+ */
+
+#include "qemu_memorymap.h"
+
+/************************************************************************************
+ * Public Types
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public Data
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+#endif /* __ARCH_X86_SRC_QEMU_QEMU_CHIP_H */
diff --git a/nuttx/arch/x86/src/qemu/qemu_fullcontextrestore.S b/nuttx/arch/x86/src/qemu/qemu_fullcontextrestore.S
new file mode 100644
index 000000000..b70ab0984
--- /dev/null
+++ b/nuttx/arch/x86/src/qemu/qemu_fullcontextrestore.S
@@ -0,0 +1,122 @@
+/**************************************************************************
+ * arch/x86/src/qemu/qemu_fullcontextrestore.S
+ *
+ *   Copyright (C) 2010 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ **************************************************************************/
+
+/**************************************************************************
+ * Conditional Compilation Options
+ **************************************************************************/
+
+/**************************************************************************
+ * Included Files
+ **************************************************************************/
+
+#include <nuttx/config.h>
+#include <arch/irq.h>
+#include "up_internal.h"
+
+/**************************************************************************
+ * Private Definitions
+ **************************************************************************/
+ 
+#ifdef __CYGWIN__
+# define SYMBOL(s) _##s
+#else
+# define SYMBOL(s) s
+#endif
+
+/**************************************************************************
+ * Private Types
+ **************************************************************************/
+
+/**************************************************************************
+ * Private Function Prototypes
+ **************************************************************************/
+
+/**************************************************************************
+ * Global Variables
+ **************************************************************************/
+
+/**************************************************************************
+ * Private Variables
+ **************************************************************************/
+
+/**************************************************************************
+ * Private Functions
+ **************************************************************************/
+
+/**************************************************************************
+ * Public Functions
+ **************************************************************************/
+
+/**************************************************************************
+ * Name: up_fullcontextrestore
+ *
+ * Full C prototype:
+ *  void up_fullcontextrestore(uint32_t *regs) __attribute__ ((noreturn));
+ *
+ **************************************************************************/
+
+#ifdef CONFIG_X86_NASM
+#  warning "No Nasm support"
+#else
+	.text
+	.globl	SYMBOL(up_fullcontextrestore)
+#ifndef __CYGWIN__
+	.type	SYMBOL(up_fullcontextrestore), @function
+#endif
+SYMBOL(up_fullcontextrestore):
+	movl	4(%esp), %ecx      /* U_pthread_jmpbuf in %ecx.  */
+	movl	8(%esp), %eax      /* Second argument is return value.  */
+
+	/* Save the return address now.  */
+
+	movl (JB_PC)(%ecx), %edx
+
+	/* Restore registers.  */
+
+	movl (JB_EBX)(%ecx), %ebx
+	movl (JB_ESI)(%ecx), %esi
+	movl (JB_EDI)(%ecx), %edi
+	movl (JB_EBP)(%ecx), %ebp
+	movl (JB_SP)(%ecx), %esp
+
+	/* Jump to saved PC.  */
+
+	jmp *%edx
+#ifndef __CYGWIN__
+	.size SYMBOL(up_fullcontextrestore), . - SYMBOL(up_fullcontextrestore)
+#endif
+    .end
+#endif /* CONFIG_X86_NASM */
+
diff --git a/nuttx/arch/x86/src/qemu/qemu_head.S b/nuttx/arch/x86/src/qemu/qemu_head.S
new file mode 100755
index 000000000..a1c816827
--- /dev/null
+++ b/nuttx/arch/x86/src/qemu/qemu_head.S
@@ -0,0 +1,126 @@
+/****************************************************************************

+ *  arch/x86/src/qemu/qemu_head.S

+ *

+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.

+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>

+ *

+ * Redistribution and use in source and binary forms, with or without

+ * modification, are permitted provided that the following conditions

+ * are met:

+ *

+ * 1. Redistributions of source code must retain the above copyright

+ *    notice, this list of conditions and the following disclaimer.

+ * 2. Redistributions in binary form must reproduce the above copyright

+ *    notice, this list of conditions and the following disclaimer in

+ *    the documentation and/or other materials provided with the

+ *    distribution.

+ * 3. Neither the name NuttX nor the names of its contributors may be

+ *    used to endorse or promote products derived from this software

+ *    without specific prior written permission.

+ *

+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS

+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT

+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS

+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE

+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,

+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,

+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS

+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED

+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT

+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN

+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE

+ * POSSIBILITY OF SUCH DAMAGE.

+ *

+ ****************************************************************************/

+

+/****************************************************************************

+ * Included Files

+ ****************************************************************************/

+

+#include <nuttx/config.h>

+

+/****************************************************************************

+ * .text

+ ****************************************************************************/

+

+#ifdef CONFIG_X86_NASM

+global		loader						/* Making entry point visible to linker */

+extern		os_start					/* os_start is defined elsewhere */

+extern		up_lowsetup					/* up_lowsetup is defined elsewhere */

+ 

+/* Setting up the Multiboot header - see GRUB docs for details */

+

+MODULEALIGN	equ	1<<0					/* Align loaded modules on page boundaries */

+MEMINFO		equ	1<<1					/* Provide memory map */

+FLAGS		equ	MODULEALIGN | MEMINFO	/* This is the Multiboot 'flag' field */

+MAGIC		equ	0x1BADB002				/* 'magic number' lets bootloader find the header */

+CHECKSUM	equ -(MAGIC + FLAGS)		/* Checksum required */

+ 

+section .text

+align 4

+MultiBootHeader:

+	dd		MAGIC

+	dd		FLAGS

+	dd		CHECKSUM

+ 

+/* Reserve initial kernel stack space */

+

+STACKSIZE	equ	0x4000					/* That's 16k */

+ 

+loader:

+	mov		esp, stack+STACKSIZE		/* Set up the stack */

+	push	eax							/* Pass Multiboot magic number */

+	push	ebx							/* Pass Multiboot info structure */

+ 

+	call	up_lowsetup					/* Low-level, pre-OS initialization */

+	call	os_start					/* Start NuttX */

+ 

+	cli

+hang:

+	hlt									/* Halt machine should NuttX return */

+	jmp		hang

+ 

+section .bss

+align 4

+stack:

+	resb STACKSIZE						/* Reserve 16k stack on a doubleword boundary */

+

+#else /* GAS */

+

+	.global	loader						/* Making entry point visible to linker */

+	.global	os_start					/* os_start is defined elsewhere */

+	.global	up_lowsetup					/* up_lowsetup is defined elsewhere */

+

+/* Setting up the Multiboot header - see GRUB docs for details */

+

+	.set	ALIGN, 1<<0					/* Align loaded modules on page boundaries */

+	.set	MEMINFO, 1<<1				/* Provide memory map */

+	.set	FLAGS, ALIGN | MEMINFO		/* This is the Multiboot 'flag' field */

+	.set	MAGIC, 0x1BADB002			/* 'magic number' lets bootloader find the header */

+	.set	CHECKSUM, -(MAGIC + FLAGS)	/* Checksum required */

+

+	.align	4

+	.long	MAGIC

+	.long	FLAGS

+	.long	CHECKSUM

+

+/* Reserve initial kernel stack space */

+

+	.set	STACKSIZE, 0x4000			/* That is, 16k */

+	.comm	stack, STACKSIZE, 32		/* Reserve 16k stack on a quadword boundary */

+

+loader:

+	mov		$(stack + STACKSIZE), %esp	/* Set up the stack */

+	push	%eax						/* Multiboot magic number */

+	push	%ebx						/* Multiboot data structure */

+

+	call	up_lowsetup					/* Low-level, pre-OS initialization */

+	call	os_start					/* Start NuttX */

+

+	cli

+hang:

+	hlt									/* Halt machine should NuttX return */

+	jmp	hang

+#endif

+	.end

+#endif
\ No newline at end of file
diff --git a/nuttx/arch/x86/src/qemu/qemu_idle.c b/nuttx/arch/x86/src/qemu/qemu_idle.c
new file mode 100644
index 000000000..42145105b
--- /dev/null
+++ b/nuttx/arch/x86/src/qemu/qemu_idle.c
@@ -0,0 +1,88 @@
+/****************************************************************************
+ *  arch/x86/src/qemu/qemu_idle.c
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <nuttx/arch.h>
+#include "up_internal.h"
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: up_idle
+ *
+ * Description:
+ *   up_idle() is the logic that will be executed when their is no other
+ *   ready-to-run task.  This is processor idle time and will continue until
+ *   some interrupt occurs to cause a context switch from the idle task.
+ *
+ *   Processing in this state may be processor-specific. e.g., this is where
+ *   power management operations might be performed.
+ *
+ ****************************************************************************/
+
+void up_idle(void)
+{
+#if defined(CONFIG_SUPPRESS_INTERRUPTS) || defined(CONFIG_SUPPRESS_TIMER_INTS)
+  /* If the system is idle and there are no timer interrupts, then process
+   * "fake" timer interrupts. Hopefully, something will wake up.
+   */
+
+  sched_process_timer();
+#else
+
+  /* Sleep until an interrupt occurs to save power */
+
+#endif
+}
+
diff --git a/nuttx/arch/x86/src/qemu/qemu_internal.h b/nuttx/arch/x86/src/qemu/qemu_internal.h
new file mode 100755
index 000000000..601f84b77
--- /dev/null
+++ b/nuttx/arch/x86/src/qemu/qemu_internal.h
@@ -0,0 +1,389 @@
+/************************************************************************************
+ * arch/x86/src/qemu/qemu_internal.h
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+#ifndef __ARCH_X86_SRC_QEMU_QEMU_INTERNAL_H
+#define __ARCH_X86_SRC_QEMU_QEMU_INTERNAL_H
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+#include <nuttx/compiler.h>
+
+#include <sys/types.h>
+#include <stdint.h>
+#include <stdbool.h>
+
+#include "up_internal.h"
+#include "chip.h"
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+
+/* Configuration ********************************************************************/
+
+/************************************************************************************
+ * Public Types
+ ************************************************************************************/
+
+/************************************************************************************
+ * Inline Functions
+ ************************************************************************************/
+
+#ifndef __ASSEMBLY__
+
+/************************************************************************************
+ * Public Data
+ ************************************************************************************/
+
+#undef EXTERN
+#if defined(__cplusplus)
+#define EXTERN extern "C"
+extern "C" {
+#else
+#define EXTERN extern
+#endif
+
+/************************************************************************************
+ * Public Function Prototypes
+ ************************************************************************************/
+
+/************************************************************************************
+ * Name: i486_clockconfig
+ *
+ * Description:
+ *   Called to initialize the LPC17XX.  This does whatever setup is needed to put the
+ *   MCU in a usable state.  This includes the initialization of clocking using the
+ *   settings in board.h.
+ *
+ ************************************************************************************/
+
+EXTERN void i486_clockconfig(void);
+
+/************************************************************************************
+ * Name: i486_lowsetup
+ *
+ * Description:
+ *   Called at the very beginning of _start.  Performs low level initialization
+ *   including setup of the console UART.  This UART done early so that the serial
+ *   console is available for debugging very early in the boot sequence.
+ *
+ ************************************************************************************/
+
+EXTERN void i486_lowsetup(void);
+
+/************************************************************************************
+ * Name: i486_gpioirqinitialize
+ *
+ * Description:
+ *   Initialize logic to support a second level of interrupt decoding for GPIO pins.
+ *
+ ************************************************************************************/
+
+#ifdef CONFIG_GPIO_IRQ
+EXTERN void i486_gpioirqinitialize(void);
+#else
+#  define i486_gpioirqinitialize()
+#endif
+
+/************************************************************************************
+ * Name: i486_configgpio
+ *
+ * Description:
+ *   Configure a GPIO pin based on bit-encoded description of the pin.
+ *
+ ************************************************************************************/
+
+EXTERN int i486_configgpio(uint16_t cfgset);
+
+/************************************************************************************
+ * Name: i486_gpiowrite
+ *
+ * Description:
+ *   Write one or zero to the selected GPIO pin
+ *
+ ************************************************************************************/
+
+EXTERN void i486_gpiowrite(uint16_t pinset, bool value);
+
+/************************************************************************************
+ * Name: i486_gpioread
+ *
+ * Description:
+ *   Read one or zero from the selected GPIO pin
+ *
+ ************************************************************************************/
+
+EXTERN bool i486_gpioread(uint16_t pinset);
+
+/************************************************************************************
+ * Name: i486_gpioirqenable
+ *
+ * Description:
+ *   Enable the interrupt for specified GPIO IRQ
+ *
+ ************************************************************************************/
+
+#ifdef CONFIG_GPIO_IRQ
+EXTERN void i486_gpioirqenable(int irq);
+#else
+#  define i486_gpioirqenable(irq)
+#endif
+
+/************************************************************************************
+ * Name: i486_gpioirqdisable
+ *
+ * Description:
+ *   Disable the interrupt for specified GPIO IRQ
+ *
+ ************************************************************************************/
+
+#ifdef CONFIG_GPIO_IRQ
+EXTERN void i486_gpioirqdisable(int irq);
+#else
+#  define i486_gpioirqdisable(irq)
+#endif
+
+/************************************************************************************
+ * Function:  i486_dumpgpio
+ *
+ * Description:
+ *   Dump all GPIO registers associated with the base address of the provided pinset.
+ *
+ ************************************************************************************/
+
+#ifdef CONFIG_DEBUG_GPIO
+EXTERN int i486_dumpgpio(uint16_t pinset, const char *msg);
+#else
+#  define i486_dumpgpio(p,m)
+#endif
+
+/************************************************************************************
+ * Name:  i486_spi/ssp0/ssp1select, i486_spi/ssp0/ssp1status, and
+ *        i486_spi/ssp0/ssp1cmddata
+ *
+ * Description:
+ *   These external functions must be provided by board-specific logic.  They are
+ *   implementations of the select, status, and cmddata methods of the SPI interface
+ *   defined by struct spi_ops_s (see include/nuttx/spi.h). All other methods 
+ *   including up_spiinitialize()) are provided by common LPC17xx logic.  To use
+ *   this common SPI logic on your board:
+ *
+ *   1. Provide logic in i486_boardinitialize() to configure SPI/SSP chip select
+ *      pins.
+ *   2. Provide i486_spi/ssp0/ssp1select() and i486_spi/ssp0/ssp1status() functions
+ *      in your board-specific logic.  These functions will perform chip selection
+ *      and status operations using GPIOs in the way your board is configured.
+ *   2. If CONFIG_SPI_CMDDATA is defined in the NuttX configuration, provide
+ *      i486_spi/ssp0/ssp1cmddata() functions in your board-specific logic.  These
+ *      functions will perform cmd/data selection operations using GPIOs in the way
+ *      your board is configured.
+ *   3. Add a call to up_spiinitialize() in your low level application
+ *      initialization logic
+ *   4. The handle returned by up_spiinitialize() may then be used to bind the
+ *      SPI driver to higher level logic (e.g., calling 
+ *      mmcsd_spislotinitialize(), for example, will bind the SPI driver to
+ *      the SPI MMC/SD driver).
+ *
+ ************************************************************************************/
+
+struct spi_dev_s;
+enum spi_dev_e;
+
+#ifdef CONFIG_I486_SPI
+EXTERN void  i486_spiselect(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected);
+EXTERN uint8_t i486_spistatus(FAR struct spi_dev_s *dev, enum spi_dev_e devid);
+#ifdef CONFIG_SPI_CMDDATA
+EXTERN int i486_spicmddata(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool cmd);
+#endif
+#endif
+
+/****************************************************************************
+ * Name: ssp_flush
+ *
+ * Description:
+ *   Flush and discard any words left in the RX fifo.  This can be called
+ *   from ssp0/1select after a device is deselected (if you worry about such
+ *   things).
+ *
+ * Input Parameters:
+ *   dev - Device-specific state data
+ *
+ * Returned Value:
+ *   None
+ *
+ ****************************************************************************/
+
+struct spi_dev_s;
+#ifdef CONFIG_I486_SPI
+EXTERN void spi_flush(FAR struct spi_dev_s *dev);
+#endif
+#if defined(CONFIG_I486_SSP0) || defined(CONFIG_I486_SSP1)
+EXTERN void ssp_flush(FAR struct spi_dev_s *dev);
+#endif
+
+/****************************************************************************
+ * Name: i486_dmainitialize
+ *
+ * Description:
+ *   Initialize the GPDMA subsystem.
+ *
+ * Returned Value:
+ *   None
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_I486_GPDMA
+EXTERN void i486_dmainitilaize(void);
+#endif
+
+/****************************************************************************
+ * Name: i486_dmachannel
+ *
+ * Description:
+ *   Allocate a DMA channel.  This function sets aside a DMA channel and
+ *   gives the caller exclusive access to the DMA channel.
+ *
+ * Returned Value:
+ *   One success, this function returns a non-NULL, void* DMA channel
+ *   handle.  NULL is returned on any failure.  This function can fail only
+ *   if no DMA channel is available.
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_I486_GPDMA
+EXTERN DMA_HANDLE i486_dmachannel(void);
+#endif
+
+/****************************************************************************
+ * Name: i486_dmafree
+ *
+ * Description:
+ *   Release a DMA channel.  NOTE:  The 'handle' used in this argument must
+ *   NEVER be used again until i486_dmachannel() is called again to re-gain
+ *   a valid handle.
+ *
+ * Returned Value:
+ *   None
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_I486_GPDMA
+EXTERN void i486_dmafree(DMA_HANDLE handle);
+#endif
+
+/****************************************************************************
+ * Name: i486_dmasetup
+ *
+ * Description:
+ *   Configure DMA for one transfer.
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_I486_GPDMA
+EXTERN int i486_dmarxsetup(DMA_HANDLE handle,
+                            uint32_t control, uint32_t config,
+                            uint32_t srcaddr, uint32_t destaddr,
+                            size_t nbytes);
+#endif
+
+/****************************************************************************
+ * Name: i486_dmastart
+ *
+ * Description:
+ *   Start the DMA transfer
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_I486_GPDMA
+EXTERN int i486_dmastart(DMA_HANDLE handle, dma_callback_t callback, void *arg);
+#endif
+
+/****************************************************************************
+ * Name: i486_dmastop
+ *
+ * Description:
+ *   Cancel the DMA.  After i486_dmastop() is called, the DMA channel is
+ *   reset and i486_dmasetup() must be called before i486_dmastart() can be
+ *   called again
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_I486_GPDMA
+EXTERN void i486_dmastop(DMA_HANDLE handle);
+#endif
+
+/****************************************************************************
+ * Name: i486_dmasample
+ *
+ * Description:
+ *   Sample DMA register contents
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_I486_GPDMA
+#ifdef CONFIG_DEBUG_DMA
+EXTERN void i486_dmasample(DMA_HANDLE handle, struct i486_dmaregs_s *regs);
+#else
+#  define i486_dmasample(handle,regs)
+#endif
+#endif
+
+/****************************************************************************
+ * Name: i486_dmadump
+ *
+ * Description:
+ *   Dump previously sampled DMA register contents
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_I486_GPDMA
+#ifdef CONFIG_DEBUG_DMA
+EXTERN void i486_dmadump(DMA_HANDLE handle, const struct i486_dmaregs_s *regs,
+                          const char *msg);
+#else
+#  define i486_dmadump(handle,regs,msg)
+#endif
+#endif
+
+#undef EXTERN
+#if defined(__cplusplus)
+}
+#endif
+
+#endif /* __ASSEMBLY__ */
+#endif /* __ARCH_X86_SRC_QEMU_QEMU_INTERNAL_H */
diff --git a/nuttx/arch/x86/src/qemu/qemu_memorymap.h b/nuttx/arch/x86/src/qemu/qemu_memorymap.h
new file mode 100755
index 000000000..571ddd03d
--- /dev/null
+++ b/nuttx/arch/x86/src/qemu/qemu_memorymap.h
@@ -0,0 +1,67 @@
+/************************************************************************************

+ * arch/x86/src/qemu/qemu_memorymap.h

+ *

+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.

+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>

+ *

+ * Redistribution and use in source and binary forms, with or without

+ * modification, are permitted provided that the following conditions

+ * are met:

+ *

+ * 1. Redistributions of source code must retain the above copyright

+ *    notice, this list of conditions and the following disclaimer.

+ * 2. Redistributions in binary form must reproduce the above copyright

+ *    notice, this list of conditions and the following disclaimer in

+ *    the documentation and/or other materials provided with the

+ *    distribution.

+ * 3. Neither the name NuttX nor the names of its contributors may be

+ *    used to endorse or promote products derived from this software

+ *    without specific prior written permission.

+ *

+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS

+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT

+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS

+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE

+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,

+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,

+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS

+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED

+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT

+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN

+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE

+ * POSSIBILITY OF SUCH DAMAGE.

+ *

+ ************************************************************************************/

+

+#ifndef __ARCH_X86_SRC_QEMU_QEMU_MEMORYMAP_H

+#define __ARCH_X86_SRC_QEMU_QEMU_MEMORYMAP_H

+

+/************************************************************************************

+ * Included Files

+ ************************************************************************************/

+

+#include <nuttx/config.h>

+

+#include "chip.h"

+

+/************************************************************************************

+ * Pre-processor Definitions

+ ************************************************************************************/

+

+/* Memory Map ***********************************************************************/

+

+/* Peripheral Base Addresses ********************************************************/

+

+/************************************************************************************

+ * Public Types

+ ************************************************************************************/

+

+/************************************************************************************

+ * Public Data

+ ************************************************************************************/

+

+/************************************************************************************

+ * Public Functions

+ ************************************************************************************/

+

+#endif /* __ARCH_X86_SRC_QEMU_QEMU_MEMORYMAP_H */

diff --git a/nuttx/arch/x86/src/qemu/qemu_saveusercontext.S b/nuttx/arch/x86/src/qemu/qemu_saveusercontext.S
new file mode 100644
index 000000000..1d72bd643
--- /dev/null
+++ b/nuttx/arch/x86/src/qemu/qemu_saveusercontext.S
@@ -0,0 +1,130 @@
+/**************************************************************************
+ * arch/x86/src/qemu/up_saveusercontext.S
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ **************************************************************************/
+
+/**************************************************************************
+ * Conditional Compilation Options
+ **************************************************************************/
+
+/**************************************************************************
+ * Included Files
+ **************************************************************************/
+
+#include <nuttx/config.h>
+#include <arch/irq.h>
+#include "up_internal.h"
+
+/**************************************************************************
+ * Private Definitions
+ **************************************************************************/
+ 
+#ifdef __CYGWIN__
+# define SYMBOL(s) _##s
+#else
+# define SYMBOL(s) s
+#endif
+
+/**************************************************************************
+ * Private Types
+ **************************************************************************/
+
+/**************************************************************************
+ * Private Function Prototypes
+ **************************************************************************/
+
+/**************************************************************************
+ * Global Variables
+ **************************************************************************/
+
+/**************************************************************************
+ * Private Variables
+ **************************************************************************/
+
+/**************************************************************************
+ * Private Functions
+ **************************************************************************/
+
+/**************************************************************************
+ * Public Functions
+ **************************************************************************/
+
+/**************************************************************************
+ * Name: up_saveusercontext
+ *
+ * Full C prototype:
+ *  int up_saveusercontext(uint32_t *regs);
+ *
+ **************************************************************************/
+
+#ifdef CONFIG_X86_NASM
+#  warning "No Nasm support"
+#else
+	.text
+	.globl	SYMBOL(up_saveusercontext)
+#ifndef __CYGWIN__
+	.type	SYMBOL(up_saveusercontext), @function
+#endif
+SYMBOL(up_saveusercontext):
+
+	/* %ebx, %esi, %edi, and %ebp must be preserved.
+	 * save %ebx, $esi, and %edi now... */
+
+	movl	4(%esp), %eax
+	movl	%ebx, (REG_EBX)(%eax)
+	movl	%esi, (REG_ESI)(%eax)
+	movl	%edi, (REG_EDI)(%eax)
+
+	/* Save the value of SP as will be after we return */
+
+	leal	4(%esp), %ecx
+	movl	%ecx, (REG_SP)(%eax)
+
+	/* Save the return PC */
+
+	movl	0(%esp), %ecx
+	movl	%ecx, (REG_PC)(%eax)
+
+	/* Save the framepointer */
+
+	movl %ebp, (REG_EBP)(%eax)
+
+	/* And return 0 */
+
+	xorl    %eax, %eax
+	ret
+#ifndef __CYGWIN__
+	.size	SYMBOL(up_saveusercontext), . - SYMBOL(up_saveusercontext)
+#endif
+    .end
+#endif
diff --git a/nuttx/arch/z80/include/serial.h b/nuttx/arch/z80/include/serial.h
index 934a93cd4..0a54e5849 100644
--- a/nuttx/arch/z80/include/serial.h
+++ b/nuttx/arch/z80/include/serial.h
@@ -1,7 +1,7 @@
 /****************************************************************************
- * arch/serial.h
+ * arch/z80/include/serial.h
  *
- *   Copyright (C) 2007-2009 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2007-2009, 2011 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -33,23 +33,19 @@
  *
  ****************************************************************************/
 
-#ifndef __ARCH_SERIAL_H
-#define __ARCH_SERIAL_H
+#ifndef __ARCH_Z80_INCLUDE_SERIAL_TYPES_H
+#define __ARCH_Z80_INCLUDE_SERIAL_TYPES_H
 
 /****************************************************************************
  * Included Files
  ****************************************************************************/
 
+#include <nuttx/ioctl.h>
+
 /****************************************************************************
  * Definitions
  ****************************************************************************/
 
-/* IOCTL commands supported by the z80 serial driver */
-
-#define TIOCSBRK        0x5401  /* BSD compatibility */
-#define TIOCCBRK        0x5402  /* " " "           " */
-#define TIOCSERGSTRUCT  0x5403  /* Get up_dev_t for port */
-
 /****************************************************************************
  * Public Data
  ****************************************************************************/
@@ -58,4 +54,4 @@
  * Public Functions
  ****************************************************************************/
 
-#endif /* __ARCH_SERIAL_H */
+#endif /* __ARCH_Z80_INCLUDE_SERIAL_TYPES_H */
diff --git a/nuttx/configs/qemu-i486/README.txt b/nuttx/configs/qemu-i486/README.txt
new file mode 100644
index 000000000..d4c418ed8
--- /dev/null
+++ b/nuttx/configs/qemu-i486/README.txt
@@ -0,0 +1,16 @@
+README
+^^^^^^
+
+This README file describes the contents of the build configurations available
+for the NuttX QEMU i486 port.
+
+Configurations
+^^^^^^^^^^^^^^
+
+ostest
+
+  The "standard" NuttX examples/ostest configuration.  This
+  configuration may be selected as follows:
+
+    cd <nuttx-directory>/tools
+    ./configure.sh qemu-i486/ostest
diff --git a/nuttx/configs/qemu-i486/include/README.txt b/nuttx/configs/qemu-i486/include/README.txt
new file mode 100644
index 000000000..c1f417b12
--- /dev/null
+++ b/nuttx/configs/qemu-i486/include/README.txt
@@ -0,0 +1 @@
+This directory contains header files unique to the QEMU i486 platform.
diff --git a/nuttx/configs/qemu-i486/include/board.h b/nuttx/configs/qemu-i486/include/board.h
new file mode 100755
index 000000000..35f98987c
--- /dev/null
+++ b/nuttx/configs/qemu-i486/include/board.h
@@ -0,0 +1,97 @@
+/************************************************************************************
+ * configs/qemu-i486/include/board.h
+ * include/arch/board/board.h
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+#ifndef _CONFIGS_QEMU_I486_INCLUDE_BOARD_H
+#define _CONFIGS_QEMU_I486_INCLUDE_BOARD_H
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+
+/* Clocking *************************************************************************/
+
+/* LED definitions ******************************************************************/
+
+/* Button definitions ***************************************************************/
+
+/* Alternate pin selections *********************************************************/
+
+/************************************************************************************
+ * Public Types
+ ************************************************************************************/
+
+#ifndef __ASSEMBLY__
+
+/************************************************************************************
+ * Public Data
+ ************************************************************************************/
+
+#undef EXTERN
+#if defined(__cplusplus)
+#define EXTERN extern "C"
+extern "C" {
+#else
+#define EXTERN extern
+#endif
+
+/************************************************************************************
+ * Public Function Prototypes
+ ************************************************************************************/
+/************************************************************************************
+ * Name: up_boardinitialize
+ *
+ * Description:
+ *   All x86 architectures must provide the following entry point.  This entry point
+ *   is called early in the intitialization -- after all memory has been configured
+ *   and mapped but before any devices have been initialized.
+ *
+ ************************************************************************************/
+
+EXTERN void up_boardinitialize(void);
+
+#undef EXTERN
+#if defined(__cplusplus)
+}
+#endif
+
+#endif /* __ASSEMBLY__ */
+#endif  /* _CONFIGS_QEMU_I486_INCLUDE_BOARD_H */
diff --git a/nuttx/configs/qemu-i486/ostest/Make.defs b/nuttx/configs/qemu-i486/ostest/Make.defs
new file mode 100644
index 000000000..e92dc4c5f
--- /dev/null
+++ b/nuttx/configs/qemu-i486/ostest/Make.defs
@@ -0,0 +1,123 @@
+############################################################################
+# configs/qemu-i486/Make.defs
+#
+#   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+include ${TOPDIR}/.config
+
+HOSTOS = ${shell uname -o 2>/dev/null || echo "Other"}
+
+ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
+  ARCHOPTIMIZATION = -g
+else
+  ARCHOPTIMIZATION = -O2
+endif
+
+ifeq ($(WINTOOL),y)
+  # Windows-native toolchains
+  DIRLINK = $(TOPDIR)/tools/winlink.sh
+  DIRUNLINK = $(TOPDIR)/tools/unlink.sh
+  MKDEP = $(TOPDIR)/tools/mknulldeps.sh
+  ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
+  ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
+  ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/ostest/ld.script}"
+  MAXOPTIMIZATION = -O2
+else
+  # Linux/Cygwin-native toolchain
+  MKDEP = $(TOPDIR)/tools/mkdeps.sh
+  ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
+  ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
+  ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/ostest/ld.script
+endif
+
+ARCHCPUFLAGS = -march=i486 -mtune=i486 -fno-builtin
+ARCHPICFLAGS = -fpic
+ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
+ARCHDEFINES =
+
+CROSSDEV =
+CC = $(CROSSDEV)gcc
+CPP = $(CROSSDEV)gcc -E
+LD = $(CROSSDEV)ld
+AR = $(CROSSDEV)ar rcs
+NM = $(CROSSDEV)nm
+OBJCOPY = $(CROSSDEV)objcopy
+OBJDUMP = $(CROSSDEV)objdump
+
+CFLAGS = $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) -pipe
+CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES)
+AFLAGS = $(CFLAGS) -D__ASSEMBLY__
+
+OBJEXT = .o
+LIBEXT = .a
+
+ifeq ($(HOSTOS),Cygwin)
+  EXEEXT = .exe
+else
+  EXEEXT =
+endif
+
+ifeq ("${CONFIG_DEBUG_SYMBOLS}","y")
+  LDFLAGS += -g
+endif
+
+define PREPROCESS
+	@echo "CPP: $1->$2"
+	@$(CPP) $(CPPFLAGS) $1 -o $2
+endef
+
+define COMPILE
+	@echo "CC: $1"
+	@$(CC) -c $(CFLAGS) $1 -o $2
+endef
+
+define ASSEMBLE
+	@echo "AS: $1"
+	@$(CC) -c $(AFLAGS) $1 -o $2
+endef
+
+define ARCHIVE
+	echo "AR: $2"; \
+	$(AR) $1 $2 || { echo "$(AR) $1 $2 FAILED!" ; exit 1 ; }
+endef
+
+define CLEAN
+	@rm -f *.o *.a
+endef
+
+MKDEP = $(TOPDIR)/tools/mkdeps.sh
+
+HOSTCC = gcc
+HOSTINCLUDESv = -I.
+HOSTCFLAGS = $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(HOSTINCLUDES) $(ARCHDEFINES) -pipe
+HOSTLDFLAGS =
diff --git a/nuttx/configs/qemu-i486/ostest/defconfig b/nuttx/configs/qemu-i486/ostest/defconfig
new file mode 100644
index 000000000..f352930f5
--- /dev/null
+++ b/nuttx/configs/qemu-i486/ostest/defconfig
@@ -0,0 +1,420 @@
+############################################################################
+# configs/qemu-i486/ostest/defconfig
+#
+#   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+#
+# Architecture selection
+#
+# CONFIG_ARCH - identifies the arch subdirectory and, hence, the
+#   processor architecture.
+# CONFIG_ARCH_architecture - for use in C code.  This identifies the
+#   specific architecture within the chip familyl.
+# CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
+# CONFIG_ARCH_CHIP_name - For use in C code
+# CONFIG_ARCH_BOARD - identifies the configs subdirectory and, hence,
+#   the board that supports the particular chip or SoC.
+# CONFIG_ARCH_BOARD_name - for use in C code
+# CONFIG_ENDIAN_BIG - define if big endian (default is little endian)
+# CONFIG_BOARD_LOOPSPERMSEC - for delay loops
+# CONFIG_DRAM_SIZE - Describes the installed DRAM.
+# CONFIG_DRAM_START - The start address of DRAM (physical)
+# CONFIG_DRAM_END - Last address+1 of installed RAM
+# CONFIG_ARCH_IRQPRIO - Set if the architecture supports interrupt prioritization
+# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
+#   stack. If defined, this symbol is the size of the interrupt
+#   stack in bytes.  If not defined, the user task stacks will be
+#   used during interrupt handling.
+# CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
+# CONFIG_ARCH_BOOTLOADER - Set if you are using a bootloader.
+# CONFIG_ARCH_LEDS -  Use LEDs to show state. Unique to board architecture.
+# CONFIG_ARCH_BUTTONS -  Enable support for buttons. Unique to board architecture.
+# CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
+#   cause a 100 second delay during boot-up.  This 100 second delay
+#   serves no purpose other than it allows you to calibrate
+#   CONFIG_BOARD_LOOPSPERMSEC.  You simply use a stop watch to measure
+#   the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until
+#   the delay actually is 100 seconds.
+# CONFIG_ARCH_DMA - Support DMA initialization
+#
+CONFIG_ARCH=x86
+CONFIG_ARCH_X86=y
+CONFIG_ARCH_I486=y
+CONFIG_ARCH_CHIP=qemu
+CONFIG_ARCH_CHIP_QEMU=y
+CONFIG_ARCH_BOARD=qemu-i486
+CONFIG_ARCH_BOARD_QEMU_I486=y
+CONFIG_BOARD_LOOPSPERMSEC=999
+CONFIG_DRAM_SIZE=0x00100000
+CONFIG_DRAM_START=0x00100000
+CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE)
+CONFIG_ARCH_STACKDUMP=y
+CONFIG_ARCH_LEDS=n
+CONFIG_ARCH_BUTTONS=n
+CONFIG_ARCH_CALIBRATION=n
+CONFIG_ARCH_DMA=n
+
+#
+# General OS setup
+#
+# CONFIG_APP_DIR - Identifies the relative path to the directory
+#   that builds the application to link with NuttX.
+# CONFIG_DEBUG - enables built-in debug options
+# CONFIG_DEBUG_VERBOSE - enables verbose debug output
+# CONFIG_DEBUG_SYMBOLS - build without optimization and with
+#   debug symbols (needed for use with a debugger).
+# CONFIG_MM_REGIONS - If the architecture includes multiple
+#   regions of memory to allocate from, this specifies the
+#   number of memory regions that the memory manager must
+#   handle and enables the API mm_addregion(start, end);
+# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
+#   time console output
+# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
+#   or TICKS_PER_MSEC=10.  This setting may be defined to
+#   inform NuttX that the processor hardware is providing
+#   system timer interrupts at some interrupt interval other
+#   than 10 msec.
+# CONFIG_RR_INTERVAL - The round robin timeslice will be set
+#   this number of milliseconds;  Round robin scheduling can
+#   be disabled by setting this value to zero.
+# CONFIG_SCHED_INSTRUMENTATION - enables instrumentation in 
+#   scheduler to monitor system performance
+# CONFIG_TASK_NAME_SIZE - Spcifies that maximum size of a
+#   task name to save in the TCB.  Useful if scheduler
+#   instrumentation is selected.  Set to zero to disable.
+# CONFIG_JULIAN_TIME - Enables Julian time conversions
+# CONFIG_START_YEAR, CONFIG_START_MONTH, CONFIG_START_DAY -
+#   Used to initialize the internal time logic.
+# CONFIG_DEV_CONSOLE - Set if architecture-specific logic
+#   provides /dev/console.  Enables stdout, stderr, stdin.
+# CONFIG_DEV_LOWCONSOLE - Use the simple, low-level serial console
+#   driver (minimul support)
+# CONFIG_MUTEX_TYPES: Set to enable support for recursive and
+#   errorcheck mutexes. Enables pthread_mutexattr_settype().
+# CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
+#   inheritance on mutexes and semaphores.
+# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
+#   inheritance is enabled.  It defines the maximum number of
+#   different threads (minus one) that can take counts on a
+#   semaphore with priority inheritance support.  This may be 
+#   set to zero if priority inheritance is disabled OR if you
+#   are only using semaphores as mutexes (only one holder) OR
+#   if no more than two threads participate using a counting
+#   semaphore.
+# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled,
+#   then this setting is the maximum number of higher priority
+#   threads (minus 1) than can be waiting for another thread
+#   to release a count on a semaphore.  This value may be set
+#   to zero if no more than one thread is expected to wait for
+#   a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+#   by task_create() when a new task is started.  If set, all
+#   files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+#   three file descriptors (stdin, stdout, stderr) by task_create()
+#   when a new task is started. If set, all files/drivers will
+#   appear to be closed in the new task except for stdin, stdout,
+#   and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+#   desciptors by task_create() when a new task is started. If
+#   set, all sockets will appear to be closed in the new task.
+#
+CONFIG_APP_DIR=examples/ostest
+CONFIG_DEBUG=y
+CONFIG_DEBUG_VERBOSE=y
+CONFIG_DEBUG_SYMBOLS=n
+CONFIG_MM_REGIONS=1
+CONFIG_ARCH_LOWPUTC=y
+CONFIG_RR_INTERVAL=0
+CONFIG_SCHED_INSTRUMENTATION=n
+CONFIG_TASK_NAME_SIZE=32
+CONFIG_START_YEAR=2011
+CONFIG_START_MONTH=3
+CONFIG_START_DAY=3
+CONFIG_JULIAN_TIME=n
+CONFIG_DEV_CONSOLE=y
+CONFIG_DEV_LOWCONSOLE=n
+CONFIG_MUTEX_TYPES=y
+CONFIG_PRIORITY_INHERITANCE=n
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
+
+#
+# The following can be used to disable categories of
+# APIs supported by the OS.  If the compiler supports
+# weak functions, then it should not be necessary to
+# disable functions unless you want to restrict usage
+# of those APIs.
+#
+# There are certain dependency relationships in these
+# features.
+#
+# o mq_notify logic depends on signals to awaken tasks
+#   waiting for queues to become full or empty.
+# o pthread_condtimedwait() depends on signals to wake
+#   up waiting tasks.
+#
+CONFIG_DISABLE_CLOCK=n
+CONFIG_DISABLE_POSIX_TIMERS=n
+CONFIG_DISABLE_PTHREAD=n
+CONFIG_DISABLE_SIGNALS=n
+CONFIG_DISABLE_MQUEUE=n
+CONFIG_DISABLE_MOUNTPOINT=n
+CONFIG_DISABLE_ENVIRON=n
+CONFIG_DISABLE_POLL=y
+
+#
+# Misc libc settings
+#
+# CONFIG_NOPRINTF_FIELDWIDTH - sprintf-related logic is a
+#   little smaller if we do not support fieldwidthes
+#
+CONFIG_NOPRINTF_FIELDWIDTH=n
+
+#
+# Allow for architecture optimized implementations
+#
+# The architecture can provide optimized versions of the
+# following to improve sysem performance
+#
+CONFIG_ARCH_MEMCPY=n
+CONFIG_ARCH_MEMCMP=n
+CONFIG_ARCH_MEMMOVE=n
+CONFIG_ARCH_MEMSET=n
+CONFIG_ARCH_STRCMP=n
+CONFIG_ARCH_STRCPY=n
+CONFIG_ARCH_STRNCPY=n
+CONFIG_ARCH_STRLEN=n
+CONFIG_ARCH_STRNLEN=n
+CONFIG_ARCH_BZERO=n
+CONFIG_ARCH_KMALLOC=n
+CONFIG_ARCH_KZMALLOC=n
+CONFIG_ARCH_KFREE=n
+
+##
+# General build options
+#
+# CONFIG_RRLOAD_BINARY - make the rrload binary format used with
+#   BSPs from www.ridgerun.com using the tools/mkimage.sh script
+# CONFIG_INTELHEX_BINARY - make the Intel HEX binary format
+#   used with many different loaders using the GNU objcopy program
+#   Should not be selected if you are not using the GNU toolchain.
+# CONFIG_RAW_BINARY - make a raw binary format file used with many
+#   different loaders using the GNU objcopy program.  This option
+#   should not be selected if you are not using the GNU toolchain.
+# CONFIG_HAVE_LIBM - toolchain supports libm.a
+#
+CONFIG_RRLOAD_BINARY=n
+CONFIG_INTELHEX_BINARY=n
+CONFIG_RAW_BINARY=n
+CONFIG_HAVE_LIBM=y
+
+#
+# Sizes of configurable things (0 disables)
+#
+# CONFIG_MAX_TASKS - The maximum number of simultaneously
+#   active tasks. This value must be a power of two.
+# CONFIG_MAX_TASK_ARGS - This controls the maximum number of
+#   of parameters that a task may receive (i.e., maxmum value
+#   of 'argc')
+# CONFIG_NPTHREAD_KEYS - The number of items of thread-
+#   specific data that can be retained
+# CONFIG_NFILE_DESCRIPTORS - The maximum number of file
+#   descriptors (one for each open)
+# CONFIG_NFILE_STREAMS - The maximum number of streams that
+#   can be fopen'ed
+# CONFIG_NAME_MAX - The maximum size of a file name.
+# CONFIG_STDIO_BUFFER_SIZE - Size of the buffer to allocate
+#   on fopen. (Only if CONFIG_NFILE_STREAMS > 0)
+# CONFIG_NUNGET_CHARS - Number of characters that can be
+#   buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0)
+# CONFIG_PREALLOC_MQ_MSGS - The number of pre-allocated message
+#   structures.  The system manages a pool of preallocated
+#   message structures to minimize dynamic allocations
+# CONFIG_MQ_MAXMSGSIZE - Message structures are allocated with
+#   a fixed payload size given by this settin (does not include
+#   other message structure overhead.
+# CONFIG_MAX_WDOGPARMS - Maximum number of parameters that
+#   can be passed to a watchdog handler
+# CONFIG_PREALLOC_WDOGS - The number of pre-allocated watchdog
+#   structures.  The system manages a pool of preallocated
+#   watchdog structures to minimize dynamic allocations
+# CONFIG_PREALLOC_TIMERS - The number of pre-allocated POSIX
+#   timer structures.  The system manages a pool of preallocated
+#   timer structures to minimize dynamic allocations.  Set to
+#   zero for all dynamic allocations.
+#
+CONFIG_MAX_TASKS=64
+CONFIG_MAX_TASK_ARGS=4
+CONFIG_NPTHREAD_KEYS=4
+CONFIG_NFILE_DESCRIPTORS=32
+CONFIG_NFILE_STREAMS=16
+CONFIG_NAME_MAX=32
+CONFIG_STDIO_BUFFER_SIZE=1024
+CONFIG_NUNGET_CHARS=2
+CONFIG_PREALLOC_MQ_MSGS=32
+CONFIG_MQ_MAXMSGSIZE=32
+CONFIG_MAX_WDOGPARMS=4
+CONFIG_PREALLOC_WDOGS=32
+CONFIG_PREALLOC_TIMERS=8
+
+#
+# FAT filesystem configuration
+# CONFIG_FS_FAT - Enable FAT filesystem support
+# CONFIG_FAT_SECTORSIZE - Max supported sector size
+# CONFIG_FS_ROMFS - Enable ROMFS filesystem support
+CONFIG_FS_FAT=y
+CONFIG_FS_ROMFS=n
+
+#
+# TCP/IP and UDP support via uIP
+# CONFIG_NET - Enable or disable all network features
+# CONFIG_NET_IPv6 - Build in support for IPv6
+# CONFIG_NSOCKET_DESCRIPTORS - Maximum number of socket descriptors per task/thread.
+# CONFIG_NET_SOCKOPTS - Enable or disable support for socket options
+# CONFIG_NET_BUFSIZE - uIP buffer size
+# CONFIG_NET_TCP - TCP support on or off
+# CONFIG_NET_TCP_CONNS - Maximum number of TCP connections (all tasks)
+# CONFIG_NET_TCP_READAHEAD_BUFSIZE - Size of TCP read-ahead buffers
+# CONFIG_NET_NTCP_READAHEAD_BUFFERS - Number of TCP read-ahead buffers (may be zero)
+# CONFIG_NET_TCPBACKLOG - Incoming connections pend in a backlog until
+#   accept() is called. The size of the backlog is selected when listen() is called.
+# CONFIG_NET_MAX_LISTENPORTS - Maximum number of listening TCP ports (all tasks)
+# CONFIG_NET_UDP - UDP support on or off
+# CONFIG_NET_UDP_CHECKSUMS - UDP checksums on or off
+# CONFIG_NET_UDP_CONNS - The maximum amount of concurrent UDP connections
+# CONFIG_NET_ICMP - ICMP ping response support on or off
+# CONFIG_NET_ICMP_PING - ICMP ping request support on or off
+# CONFIG_NET_PINGADDRCONF - Use "ping" packet for setting IP address
+# CONFIG_NET_STATISTICS - uIP statistics on or off
+# CONFIG_NET_RECEIVE_WINDOW - The size of the advertised receiver's window
+# CONFIG_NET_ARPTAB_SIZE - The size of the ARP table
+# CONFIG_NET_BROADCAST - Broadcast support
+# CONFIG_NET_LLH_LEN - The link level header length
+# CONFIG_NET_FWCACHE_SIZE - number of packets to remember when looking for duplicates
+CONFIG_NET=n
+CONFIG_NET_IPv6=n
+CONFIG_NSOCKET_DESCRIPTORS=0
+CONFIG_NET_SOCKOPTS=y
+CONFIG_NET_BUFSIZE=420
+CONFIG_NET_TCP=n
+CONFIG_NET_TCP_CONNS=40
+CONFIG_NET_MAX_LISTENPORTS=40
+CONFIG_NET_UDP=n
+CONFIG_NET_UDP_CHECKSUMS=y
+#CONFIG_NET_UDP_CONNS=10
+CONFIG_NET_ICMP=n
+CONFIG_NET_ICMP_PING=n
+#CONFIG_NET_PINGADDRCONF=0
+CONFIG_NET_STATISTICS=y
+#CONFIG_NET_RECEIVE_WINDOW=
+#CONFIG_NET_ARPTAB_SIZE=8
+CONFIG_NET_BROADCAST=n
+#CONFIG_NET_LLH_LEN=14
+#CONFIG_NET_FWCACHE_SIZE=2
+
+#
+# UIP Network Utilities
+# CONFIG_NET_DHCP_LIGHT - Reduces size of DHCP
+# CONFIG_NET_RESOLV_ENTRIES - Number of resolver entries
+CONFIG_NET_DHCP_LIGHT=n
+CONFIG_NET_RESOLV_ENTRIES=4
+
+#
+# Settings for examples/uip
+CONFIG_EXAMPLE_UIP_IPADDR=(192<<24|168<<16|0<<8|128)
+CONFIG_EXAMPLE_UIP_DRIPADDR=(192<<24|168<<16|0<<8|1)
+CONFIG_EXAMPLE_UIP_NETMASK=(255<<24|255<<16|255<<8|0)
+CONFIG_EXAMPLE_UIP_DHCPC=n
+
+#
+# Settings for examples/nettest
+CONFIG_EXAMPLE_NETTEST_SERVER=n
+CONFIG_EXAMPLE_NETTEST_PERFORMANCE=n
+CONFIG_EXAMPLE_NETTEST_NOMAC=n
+CONFIG_EXAMPLE_NETTEST_IPADDR=(192<<24|168<<16|0<<8|128)
+CONFIG_EXAMPLE_NETTEST_DRIPADDR=(192<<24|168<<16|0<<8|1)
+CONFIG_EXAMPLE_NETTEST_NETMASK=(255<<24|255<<16|255<<8|0)
+CONFIG_EXAMPLE_NETTEST_CLIENTIP=(192<<24|168<<16|0<<8|106)
+
+#
+# Settings for examples/ostest
+CONFIG_EXAMPLES_OSTEST_LOOPS=100
+CONFIG_EXAMPLES_OSTEST_STACKSIZE=8192
+
+#
+# Settings for examples/nsh
+CONFIG_EXAMPLES_NSH_CONSOLE=y
+CONFIG_EXAMPLES_NSH_TELNET=n
+CONFIG_EXAMPLES_NSH_IOBUFFER_SIZE=512
+CONFIG_EXAMPLES_NSH_CMD_SIZE=40
+CONFIG_EXAMPLES_NSH_STACKSIZE=4096
+CONFIG_EXAMPLES_NSH_DHCPC=n
+CONFIG_EXAMPLES_NSH_NOMAC=n
+CONFIG_EXAMPLES_NSH_IPADDR=(10<<24|0<<16|0<<8|2)
+CONFIG_EXAMPLES_NSH_DRIPADDR=(10<<24|0<<16|0<<8|1)
+CONFIG_EXAMPLES_NSH_NETMASK=(255<<24|255<<16|255<<8|0)
+
+#
+# Stack and heap information
+#
+# CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP
+#   operation from FLASH but must copy initialized .data sections to RAM.
+# CONFIG_BOOT_COPYTORAM -  Some configurations boot in FLASH
+#   but copy themselves entirely into RAM for better performance.
+# CONFIG_CUSTOM_STACK - The up_ implementation will handle
+#   all stack operations outside of the nuttx model.
+# CONFIG_STACK_POINTER - The initial stack pointer
+# CONFIG_IDLETHREAD_STACKSIZE - The size of the initial stack.
+#  This is the thread that (1) performs the inital boot of the system up
+#  to the point where user_start() is spawned, and (2) there after is the
+#  IDLE thread that executes only when there is no other thread ready to
+#  run.
+# CONFIG_USERMAIN_STACKSIZE - The size of the stack to allocate
+#  for the main user thread that begins at the user_start() entry point.
+# CONFIG_PTHREAD_STACK_MIN - Minimum pthread stack size
+# CONFIG_PTHREAD_STACK_DEFAULT - Default pthread stack size
+# CONFIG_HEAP_BASE - The beginning of the heap
+# CONFIG_HEAP_SIZE - The size of the heap
+#
+CONFIG_BOOT_RUNFROMFLASH=n
+CONFIG_BOOT_COPYTORAM=n
+CONFIG_CUSTOM_STACK=n
+CONFIG_IDLETHREAD_STACKSIZE=4096
+CONFIG_USERMAIN_STACKSIZE=4096
+CONFIG_PTHREAD_STACK_MIN=256
+CONFIG_PTHREAD_STACK_DEFAULT=8192
+CONFIG_HEAP_BASE=
+CONFIG_HEAP_SIZE=
diff --git a/nuttx/configs/qemu-i486/ostest/ld.script b/nuttx/configs/qemu-i486/ostest/ld.script
new file mode 100755
index 000000000..3f2ff760a
--- /dev/null
+++ b/nuttx/configs/qemu-i486/ostest/ld.script
@@ -0,0 +1,90 @@
+/****************************************************************************
+ * configs/qemu-i486/ostest/ld.script
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+ENTRY(.loader)
+SECTIONS
+{
+	. = 0x00100000;
+
+	.text : {
+		_stext = ABSOLUTE(.);
+		*(.text .text.*)        
+		_etext = ABSOLUTE(.);
+	}
+
+	.text ALIGN (0x1000) : {
+		_srodata = ABSOLUTE(.);
+		*(.rodata .rodata.*)        
+		*(.fixup)
+		*(.gnu.warning)
+		*(.gnu.linkonce.t.*)
+		*(.glue_7)
+		*(.glue_7t)
+		*(.got)
+		*(.gcc_except_table)
+		*(.gnu.linkonce.r.*)
+		_erodata = ABSOLUTE(.);
+	}
+
+	.data ALIGN (0x1000) : {
+		_sdata = ABSOLUTE(.);
+		*(.data .data.*)
+		*(.gnu.linkonce.d.*)
+		CONSTRUCTORS
+		_edata = ABSOLUTE(.);
+	} > sram AT > flash
+
+	.bss : {
+		_sbss = ABSOLUTE(.);
+		*(.bss .bss.*)
+		*(.gnu.linkonce.b.*)
+		*(COMMON)
+		_ebss = ABSOLUTE(.);
+	} > sram
+
+	/* Stabs debugging sections.	*/
+	.stab 0 : { *(.stab) }
+	.stabstr 0 : { *(.stabstr) }
+	.stab.excl 0 : { *(.stab.excl) }
+	.stab.exclstr 0 : { *(.stab.exclstr) }
+	.stab.index 0 : { *(.stab.index) }
+	.stab.indexstr 0 : { *(.stab.indexstr) }
+	.comment 0 : { *(.comment) }
+	.debug_abbrev 0 : { *(.debug_abbrev) }
+	.debug_info 0 : { *(.debug_info) }
+	.debug_line 0 : { *(.debug_line) }
+	.debug_pubnames 0 : { *(.debug_pubnames) }
+	.debug_aranges 0 : { *(.debug_aranges) }
+}
diff --git a/nuttx/configs/qemu-i486/ostest/setenv.sh b/nuttx/configs/qemu-i486/ostest/setenv.sh
new file mode 100755
index 000000000..9386b9822
--- /dev/null
+++ b/nuttx/configs/qemu-i486/ostest/setenv.sh
@@ -0,0 +1,46 @@
+#!/bin/bash
+# configs/qemu-i486/setenv.sh
+#
+#   Copyright (C) 2010 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+
+if [ "$(basename $0)" = "setenv.sh" ] ; then
+  echo "You must source this script, not run it!" 1>&2
+  exit 1
+fi
+
+if [ -z ${PATH_ORIG} ]; then export PATH_ORIG=${PATH}; fi
+
+# Define the following if you are using anything other than the system GCC
+#export NUTTX_BIN=
+#export PATH=${NUTTX_BIN}:/sbin:/usr/sbin:${PATH_ORIG}
+
+echo "PATH : ${PATH}"
diff --git a/nuttx/configs/qemu-i486/src/Makefile b/nuttx/configs/qemu-i486/src/Makefile
new file mode 100644
index 000000000..192381502
--- /dev/null
+++ b/nuttx/configs/qemu-i486/src/Makefile
@@ -0,0 +1,84 @@
+############################################################################
+# configs/qemu-i486/src/Makefile
+#
+#   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+-include $(TOPDIR)/Make.defs
+
+CFLAGS		+= -I$(TOPDIR)/sched
+
+ASRCS		= 
+CSRCS		= up_boot.c
+
+AOBJS		= $(ASRCS:.S=$(OBJEXT))
+COBJS		= $(CSRCS:.c=$(OBJEXT))
+
+SRCS		= $(ASRCS) $(CSRCS)
+OBJS		= $(AOBJS) $(COBJS)
+
+ARCH_SRCDIR	= $(TOPDIR)/arch/$(CONFIG_ARCH)/src
+ifeq ($(WINTOOL),y)
+  CFLAGS	+= -I "${shell cygpath -w $(ARCH_SRCDIR)/chip}" \
+  		   -I "${shell cygpath -w $(ARCH_SRCDIR)/common}" \
+  		   -I "${shell cygpath -w $(ARCH_SRCDIR)/cortexm3}"
+else
+  CFLAGS	+= -I$(ARCH_SRCDIR)/chip -I$(ARCH_SRCDIR)/common -I$(ARCH_SRCDIR)/cortexm3
+endif
+
+all: libboard$(LIBEXT)
+
+$(AOBJS): %$(OBJEXT): %.S
+	$(call ASSEMBLE, $<, $@)
+
+$(COBJS) $(LINKOBJS): %$(OBJEXT): %.c
+	$(call COMPILE, $<, $@)
+
+libboard$(LIBEXT): $(OBJS)
+	@( for obj in $(OBJS) ; do \
+		$(call ARCHIVE, $@, $${obj}); \
+	done ; )
+
+.depend: Makefile $(SRCS)
+	@$(MKDEP) $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep
+	@touch $@
+
+depend: .depend
+
+clean:
+	@rm -f libboard$(LIBEXT) *~ .*.swp
+	$(call CLEAN)
+
+distclean: clean
+	@rm -f Make.dep .depend
+
+-include Make.dep
diff --git a/nuttx/configs/qemu-i486/src/README.txt b/nuttx/configs/qemu-i486/src/README.txt
new file mode 100644
index 000000000..2ab000313
--- /dev/null
+++ b/nuttx/configs/qemu-i486/src/README.txt
@@ -0,0 +1 @@
+This directory contains source files unique to the QEMU i486 platform.
diff --git a/nuttx/configs/qemu-i486/src/qemui486_internal.h b/nuttx/configs/qemu-i486/src/qemui486_internal.h
new file mode 100755
index 000000000..b6a2fea48
--- /dev/null
+++ b/nuttx/configs/qemu-i486/src/qemui486_internal.h
@@ -0,0 +1,69 @@
+/************************************************************************************

+ * configs/qemu-i486/src/qemui486_internal.h

+ * arch/x86/src/board/qemui486_internal.n

+ *

+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.

+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>

+ *

+ * Redistribution and use in source and binary forms, with or without

+ * modification, are permitted provided that the following conditions

+ * are met:

+ *

+ * 1. Redistributions of source code must retain the above copyright

+ *    notice, this list of conditions and the following disclaimer.

+ * 2. Redistributions in binary form must reproduce the above copyright

+ *    notice, this list of conditions and the following disclaimer in

+ *    the documentation and/or other materials provided with the

+ *    distribution.

+ * 3. Neither the name NuttX nor the names of its contributors may be

+ *    used to endorse or promote products derived from this software

+ *    without specific prior written permission.

+ *

+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS

+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT

+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS

+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE

+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,

+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,

+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS

+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED

+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT

+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN

+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE

+ * POSSIBILITY OF SUCH DAMAGE.

+ *

+ ************************************************************************************/

+

+#ifndef _CONFIGS_QEMU_I486_SRC_QEMUI486_INTERNAL_H

+#define _CONFIGS_QEMU_I486_SRC_QEMUI486_INTERNAL_H

+

+/************************************************************************************

+ * Included Files

+ ************************************************************************************/

+

+#include <nuttx/config.h>

+#include <nuttx/compiler.h>

+

+/************************************************************************************

+ * Definitions

+ ************************************************************************************/

+

+/* GPIO Pin Definitions *************************************************************/

+

+/************************************************************************************

+ * Public Types

+ ************************************************************************************/

+

+/************************************************************************************

+ * Public data

+ ************************************************************************************/

+

+#ifndef __ASSEMBLY__

+

+/************************************************************************************

+ * Public Functions

+ ************************************************************************************/

+

+#endif /* __ASSEMBLY__ */

+#endif /* _CONFIGS_QEMU_I486_SRC_QEMUI486_INTERNAL_H */

+

diff --git a/nuttx/configs/qemu-i486/src/up_boot.c b/nuttx/configs/qemu-i486/src/up_boot.c
new file mode 100755
index 000000000..a3081bdf7
--- /dev/null
+++ b/nuttx/configs/qemu-i486/src/up_boot.c
@@ -0,0 +1,82 @@
+/************************************************************************************

+ * configs/qemu-i486/src/up_boot.c

+ * arch/x86/src/board/up_boot.c

+ *

+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.

+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>

+ *

+ * Redistribution and use in source and binary forms, with or without

+ * modification, are permitted provided that the following conditions

+ * are met:

+ *

+ * 1. Redistributions of source code must retain the above copyright

+ *    notice, this list of conditions and the following disclaimer.

+ * 2. Redistributions in binary form must reproduce the above copyright

+ *    notice, this list of conditions and the following disclaimer in

+ *    the documentation and/or other materials provided with the

+ *    distribution.

+ * 3. Neither the name NuttX nor the names of its contributors may be

+ *    used to endorse or promote products derived from this software

+ *    without specific prior written permission.

+ *

+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS

+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT

+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS

+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE

+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,

+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,

+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS

+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED

+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT

+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN

+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE

+ * POSSIBILITY OF SUCH DAMAGE.

+ *

+ ************************************************************************************/

+

+/************************************************************************************

+ * Included Files

+ ************************************************************************************/

+

+#include <nuttx/config.h>

+

+#include <debug.h>

+

+#include <arch/board/board.h>

+

+#include "up_arch.h"

+#include "up_internal.h"

+

+#include "qemu_internal.h"

+#include "qemui486_internal.h"

+

+/************************************************************************************

+ * Definitions

+ ************************************************************************************/

+

+/************************************************************************************

+ * Private Functions

+ ************************************************************************************/

+

+/************************************************************************************

+ * Public Functions

+ ************************************************************************************/

+

+/************************************************************************************

+ * Name: up_boardinitialize

+ *

+ * Description:

+ *   All x86 architectures must provide the following entry point.  This entry point

+ *   is called early in the intitialization -- after all memory has been configured

+ *   and mapped but before any devices have been initialized.

+ *

+ ************************************************************************************/

+

+void up_boardinitialize(void)

+{

+  /* Configure on-board LEDs if LED support has been selected. */

+

+#ifdef CONFIG_ARCH_LEDS

+  up_ledinit();

+#endif

+}

diff --git a/nuttx/include/nuttx/ioctl.h b/nuttx/include/nuttx/ioctl.h
index b39470200..c3b83cf04 100644
--- a/nuttx/include/nuttx/ioctl.h
+++ b/nuttx/include/nuttx/ioctl.h
@@ -51,6 +51,8 @@
  * defined below:
  */
 
+#define _TIOCBASE       (0x5400) /* Terminal I/O ioctl commands */
+#define _WDIOCBASE      (0x5400) /* Watchdog driver ioctl commands */
 #define _FIOCBASE       (0x8700) /* File system ioctl commands */
 #define _DIOCBASE       (0x8800) /* Character driver ioctl commands */
 #define _BIOCBASE       (0x8900) /* Block driver ioctl commands */
@@ -66,6 +68,22 @@
 
 #define _IOC(type,nr)   ((type)|(nr))
 
+/* Terminal I/O ioctl commands */
+
+#define _TIOCVALID(c)   (_IOC_TYPE(c)==_TIOCBASE)
+#define _TIOC(nr)       _IOC(_TIOCBASE,nr)
+
+#define TIOCSBRK        _TIOC(0x0001)     /* BSD compatibility */
+#define TIOCCBRK        _TIOC(0x0002)     /* " " "           " */
+#define TIOCSERGSTRUCT  _TIOC(0x0003)     /* Get up_dev_t for port */
+
+/* Watchdog driver ioctl commands */
+
+#define _WDIOCVALID(c)  (_IOC_TYPE(c)==_WDIOCBASE)
+#define _WDIOC(nr)      _IOC(_WDIOCBASE,nr)
+
+#define WDIOC_KEEPALIVE _WDIOC(0x0001)    /* Restart the watchdog timer */
+
 /* NuttX file system ioctl definitions */
 
 #define _FIOCVALID(c)   (_IOC_TYPE(c)==_FIOCBASE)
diff --git a/nuttx/include/sys/types.h b/nuttx/include/sys/types.h
index 205beefff..4be7d3527 100644
--- a/nuttx/include/sys/types.h
+++ b/nuttx/include/sys/types.h
@@ -1,7 +1,7 @@
 /****************************************************************************
  * include/sys/types.h
  *
- *   Copyright (C) 2007-2009 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2007-2009, 2011 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
  *
  * Redistribution and use in source and binary forms, with or without