Add XTI support

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@2645 42af7a65-404d-4744-a932-0658087f49c3

9 files changed, 360 insertions, 41 deletions

diff --git a/nuttx/ChangeLog b/nuttx/ChangeLog
index eabff844e..e8906495c 100644
--- a/nuttx/ChangeLog
+++ b/nuttx/ChangeLog
@@ -1104,4 +1104,8 @@
 	* configs/olimex-str7p11/nettest - examples/nettest configuration using
 	  the ENC28J60 driver on the Olimex STMicro STR-P711.
 	  (unverified on original check-in)
+	* configs/olimex-str7p11/src/up_enc28j60.c - Add ENC28J60 initialization
+	  logic.
+	* arch/arm/src/str7x/str7x_xti.c - Add basic XTI support (external
+	  interrupts).
 
diff --git a/nuttx/Documentation/NuttX.html b/nuttx/Documentation/NuttX.html
index e86046858..63e59af74 100644
--- a/nuttx/Documentation/NuttX.html
+++ b/nuttx/Documentation/NuttX.html
@@ -8,7 +8,7 @@
   <tr align="center" bgcolor="#e4e4e4">
     <td>
       <h1><big><font color="#3c34ec"><i>NuttX RTOS</i></font></big></h1>
-      <p>Last Updated: May 1, 2010</p>
+      <p>Last Updated: May 2, 2010</p>
     </td>
   </tr>
 </table>
@@ -1686,6 +1686,10 @@ nuttx-5.5 2010-xx-xx Gregory Nutt &lt;spudmonkey@racsa.co.cr&gt;
 	* configs/olimex-str7p11/nettest - examples/nettest configuration using
 	  the ENC28J60 driver on the Olimex STMicro STR-P711.
 	  (unverified on original check-in)
+	* configs/olimex-str7p11/src/up_enc28j60.c - Add ENC28J60 initialization
+	  logic.
+	* arch/arm/src/str7x/str7x_xti.c - Add basic XTI support (external
+	  interrupts).
 
 pascal-2.1 2010-xx-xx Gregory Nutt &lt;spudmonkey@racsa.co.cr&gt;
 
diff --git a/nuttx/arch/arm/include/str71x/irq.h b/nuttx/arch/arm/include/str71x/irq.h
index 137dab715..bac58bb2a 100644
--- a/nuttx/arch/arm/include/str71x/irq.h
+++ b/nuttx/arch/arm/include/str71x/irq.h
@@ -1,7 +1,7 @@
 /************************************************************************************
  * arch/arm/include/str71x/irq.h
  *
- *   Copyright (C) 2008-2009 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2008-2010 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -52,36 +52,68 @@
 
 /* IRQ channels */
 
-#define STR71X_IRQ_T0TIMI     (0)
-#define STR71X_IRQ_FLASH      (1)
-#define STR71X_IRQ_RCCU       (2)
-#define STR71X_IRQ_RTC        (3)
-#define STR71X_IRQ_WDG        (4)
-#define STR71X_IRQ_XTI        (5)
-#define STR71X_IRQ_USBHP      (6)
-#define STR71X_IRQ_I2C0ITERR  (7)
-#define STR71X_IRQ_I2C1ITERR  (8)
-#define STR71X_IRQ_UART0      (9)
-#define STR71X_IRQ_UART1     (10)
-#define STR71X_IRQ_UART2     (11)
-#define STR71X_IRQ_UART3     (12)
-#define STR71X_IRQ_SPI0      (13)
-#define STR71X_IRQ_SPI1      (14)
-#define STR71X_IRQ_I2C0      (15)
-#define STR71X_IRQ_I2C1      (16)
-#define STR71X_IRQ_CAN       (17)
-#define STR71X_IRQ_ADC       (18)
-#define STR71X_IRQ_T1TIMI    (19)
-#define STR71X_IRQ_T2TIMI    (20)
-#define STR71X_IRQ_T3TIMI    (21)
-#define STR71X_IRQ_HDLC      (25)
-#define STR71X_IRQ_USBLP     (26)
-#define STR71X_IRQ_T0TOI     (29)
-#define STR71X_IRQ_T0OC1     (30)
-#define STR71X_IRQ_T0OC2     (31)
+#define STR71X_IRQ_T0TIMI      (0) /* IRQ 0:  T0.EFTI Timer 0 global interrupt */
+#define STR71X_IRQ_FLASH       (1) /* IRQ 1:  FLASH FLASH global interrupt */
+#define STR71X_IRQ_RCCU        (2) /* IRQ 2:  PRCCU PRCCU global interrupt */
+#define STR71X_IRQ_RTC         (3) /* IRQ 3:  RTC Real Time Clock global interrupt */
+#define STR71X_IRQ_WDG         (4) /* IRQ 4:  WDG.IRQ Watchdog timer interrupt */
+#define STR71X_IRQ_XTI         (5) /* IRQ 5:  XTI.IRQ XTI external interrupt */
+#define STR71X_IRQ_USBHP       (6) /* IRQ 6:  USB.HPIRQ USB high priority event interrupt */
+#define STR71X_IRQ_I2C0ITERR   (7) /* IRQ 7:  I2C0.ITERR I2C 0 error interrupt */
+#define STR71X_IRQ_I2C1ITERR   (8) /* IRQ 8:  I2C1.ITERR I2C 1 error interrupt */
+#define STR71X_IRQ_UART0       (9) /* IRQ 9:  UART0.IRQ UART 0 global interrupt */
+#define STR71X_IRQ_UART1      (10) /* IRQ 10: UART1.IRQ UART 1 global interrupt */
+#define STR71X_IRQ_UART2      (11) /* IRQ 11: UART2.IRQ UART 2 global interrupt */
+#define STR71X_IRQ_UART3      (12) /* IRQ 12: UART3.IRQ UART 3 global interrupt */
+#define STR71X_IRQ_SPI0       (13) /* IRQ 13: BSPI0.IRQ BSPI 0 global interrupt */
+#define STR71X_IRQ_SPI1       (14) /* IRQ 14: BSPI1.IRQ BSPI 1 global interrupt */
+#define STR71X_IRQ_I2C0       (15) /* IRQ 15: I2C0.IRQ I2C 0 tx/rx interrupt */
+#define STR71X_IRQ_I2C1       (16) /* IRQ 16: I2C1.IRQ I2C 1 tx/rx interrupt */
+#define STR71X_IRQ_CAN        (17) /* IRQ 17: CAN.IRQ CAN module global interrupt */
+#define STR71X_IRQ_ADC        (18) /* IRQ 18: ADC.IRQ ADC sample ready interrupt */
+#define STR71X_IRQ_T1TIMI     (19) /* IRQ 19: T1.GI Timer 1 global interrupt */
+#define STR71X_IRQ_T2TIMI     (20) /* IRQ 20: T2.GI Timer 2 global interrupt */
+#define STR71X_IRQ_T3TIMI     (21) /* IRQ 21: T3.GI Timer 3 global interrupt */
+                                   /* IRQ 22-24: Reserved */
+#define STR71X_IRQ_HDLC       (25) /* IRQ 25: HDLC.IRQ HDLC global interrupt */
+#define STR71X_IRQ_USBLP      (26) /* IRQ 26: USB.LPIRQ USB low priority event interrupt */
+                                   /* IRQ 27-28: Reserved */
+#define STR71X_IRQ_T0TOI      (29) /* IRQ 29: T0.TOI Timer 0 Overflow interrupt */
+#define STR71X_IRQ_T0OC1      (30) /* IRQ 30: T0.OCMPA Timer 0 Output Compare A interrupt */
+#define STR71X_IRQ_T0OC2      (31) /* IRQ 31: T0.OCMPB Timer 0 Output Compare B interrupt */
+
+#define STR71X_NBASEIRQS      (32)
+
+#ifdef CONFIG_STR71X_XTI
+#  define STR71X_IRQ_FIRSTXTI (32)
+#  define STR71X_IRQ_SW       (32) /* Line 0:  SW interrupt - no HW connection */
+#  define STR71X_IRQ_USBWKUP  (33) /* Line 1:  USB wake-up event: generated while exiting
+                                    *          from suspend mode */
+#  define STR71X_IRQ_PORT2p8  (34) /* Line 2:  Port 2.8 - External Interrupt */
+#  define STR71X_IRQ_PORT2p9  (35) /* Line 3:  Port 2.9 - External Interrupt */
+#  define STR71X_IRQ_PORT2p10 (36) /* Line 4:  Port 2.10 - External Interrupt */
+#  define STR71X_IRQ_PORT2p11 (37) /* Line 5:  Port 2.11 - External Interrupt */
+#  define STR71X_IRQ_PORT1p11 (38) /* Line 6:  Port 1.11 - CAN module receive pin (CANRX). */
+#  define STR71X_IRQ_PORT1p13 (39) /* Line 7:  Port 1.13 - HDLC clock (HCLK) or I2C.0 Clock
+                                    *          (I0.SCL) */
+#  define STR71X_IRQ_PORT1p14 (40) /* Line 8:  Port 1.14 - HDLC receive pin (HRXD) or I2C.0
+                                    *          Data (SDA) */
+#  define STR71X_IRQ_PORT0p1  (41) /* Line 9:  Port 0.1 - BSPI0 Slave Input data (S0.MOSI)
+                                    *          or UART3 Receive Data Input (U3.Rx) */
+#  define STR71X_IRQ_PORT0p2  (42) /* Line 10: Port 0.2 - BSPI0 Slave Input serial clock
+                                    *          (S0.SCLK) or I2C.1 Clock (I1.SCL) */
+#  define STR71X_IRQ_PORT0p6  (43) /* Line 11: Port 0.6 - BSPI1 Slave Input serial clock
+                                    *          (S1.SCLK) */
+#  define STR71X_IRQ_PORT0p8  (44) /* Line 12: Port 0.8 - UART0 Receive Data Input (U0.Rx) */
+#  define STR71X_IRQ_PORT0p10 (45) /* Line 13: Port 0.10 - UART1 Receive Data Input (U1.Rx) */
+#  define STR71X_IRQ_PORT0p13 (46) /* Line 14: Port 0.13 - UART2 Receive Data Input (U2.Rx) */
+#  define STR71X_IRQ_PORT0p15 (47) /* Line 15: Port 0.15 - WAKEUP pin or RTC ALARM */
+#  define NR_IRQS             (48)
+#else
+#  define NR_IRQS             (32)
+#endif
 
 #define STR71X_IRQ_SYSTIMER  STR71X_IRQ_T0TIMI
-#define NR_IRQS               32
 
 /* FIQ channels */
 
@@ -113,7 +145,7 @@ extern "C" {
 #ifdef __cplusplus
 }
 #endif
-#endif
+#endif /* __ASSEMBLY__ */
 
 #endif /* __ARCH_ARM_INCLUDE_STR71X_IRQ_H */
 
diff --git a/nuttx/arch/arm/src/str71x/Make.defs b/nuttx/arch/arm/src/str71x/Make.defs
index c6e0e23c4..4ca4edff4 100644
--- a/nuttx/arch/arm/src/str71x/Make.defs
+++ b/nuttx/arch/arm/src/str71x/Make.defs
@@ -54,4 +54,7 @@ CHIP_CSRCS	= str71x_prccu.c str71x_lowputc.c str71x_decodeirq.c str71x_irq.c \
 ifeq ($(CONFIG_USBDEV),y)
 CHIP_CSRCS	+= str71x_usbdev.c
 endif
+ifeq ($(CONFIG_STR71X_XTI),y)
+CHIP_CSRCS	+= str71x_xti.c
+endif
 
diff --git a/nuttx/arch/arm/src/str71x/str71x_internal.h b/nuttx/arch/arm/src/str71x/str71x_internal.h
index 468c48600..6c8913376 100644
--- a/nuttx/arch/arm/src/str71x/str71x_internal.h
+++ b/nuttx/arch/arm/src/str71x/str71x_internal.h
@@ -42,6 +42,8 @@
 

 #include <nuttx/config.h>

 

+#include <stdbool.h>

+

 #include <arch/board/board.h>

 

 /************************************************************************************

@@ -92,4 +94,34 @@
  * Public Functions

  ************************************************************************************/

 

+/********************************************************************************

+ * Name: str7x_xtiinitialize

+ *

+ * Description:

+ *   Configure XTI for operation.  Note that the lines are not used as wake-up

+ *   sources in this implementation.  Some extensions would be required for that

+ *   capability.

+ *

+ ********************************************************************************/

+

+#ifdef CONFIG_STR71X_XTI

+extern int str7x_xtiinitialize(void);

+#else

+#  define str7x_xtiinitialize()

+#endif /* CONFIG_STR71X_XTI */

+

+/********************************************************************************

+ * Name: str7x_xticonfig

+ *

+ * Description:

+ *   Configure an external line to provide interrupts.

+ *

+ ********************************************************************************/

+

+#ifdef CONFIG_STR71X_XTI

+extern int str7x_xticonfig(int irq, bool rising);

+#else

+#  define str7x_xticonfig(irq,rising)

+#endif /* CONFIG_STR71X_XTI */

+

 #endif /* __ARCH_ARM_SRC_STR71X_STR71X_INTERNAL_H */

diff --git a/nuttx/arch/arm/src/str71x/str71x_xti.c b/nuttx/arch/arm/src/str71x/str71x_xti.c
new file mode 100755
index 000000000..e95e4349b
--- /dev/null
+++ b/nuttx/arch/arm/src/str71x/str71x_xti.c
@@ -0,0 +1,230 @@
+/********************************************************************************
+ * arch/arm/src/str71x/str71x_xti.c
+ *
+ *   Copyright (C) 2010 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ********************************************************************************/
+
+/********************************************************************************
+ * Included Files
+ ********************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <stdint.h>
+#include <nuttx/irq.h>
+#include <nuttx/arch.h>
+#include <assert.h>
+#include <errno.h>
+#include <debug.h>
+
+#include <arch/board/board.h>
+
+#include "chip.h"
+#include "up_arch.h"
+#include "os_internal.h"
+#include "up_internal.h"
+
+#ifdef CONFIG_STR71X_XTI
+
+/********************************************************************************
+ * Pre-procesor Definitions
+ ********************************************************************************/
+
+/********************************************************************************
+ * Private Types
+ ********************************************************************************/
+
+struct xtiregs_s
+{
+  uint32_t mr; /* Mask register */
+  uint32_t tr; /* Trigger polarity register */
+};
+
+/********************************************************************************
+ * Public Data
+ ********************************************************************************/
+
+static const struct xtiregs_s g_xtiregs[2] =
+{
+  { STR71X_XTI_MRL, STR71X_XTI_TRL },
+  { STR71X_XTI_MRH, STR71X_XTI_TRH }
+};
+
+/********************************************************************************
+ * Private Data
+ ********************************************************************************/
+
+/********************************************************************************
+ * Private Functions
+ ********************************************************************************/
+
+static int str7x_xtiinterrupt(int irq, FAR void *context)
+{
+  uint16_t enabled = (uint16_t)getreg8(STR71X_XTI_MRH) << 8 |
+                     (uint16_t)getreg8(STR71X_XTI_MRL);
+  uint16_t pending = (uint16_t)getreg8(STR71X_XTI_PRH) << 8 |
+                     (uint16_t)getreg8(STR71X_XTI_PRL);
+  uint16_t mask;
+
+  /* Clear the interrupts now.  This seems unsafe?  Couldn't this cause lost
+   * interupts?
+   */
+
+  mask = ~pending;
+  putreg8(mask >> 8, STR71X_XTI_PRH);
+  putreg8(mask & 0xff, STR71X_XTI_PRH);
+
+  /* Then dispatch the interrupts */
+
+  pending &= enabled;
+
+  for (irq = STR71X_IRQ_FIRSTXTI, mask = 0x0001;
+       irq < NR_IRQS && pending != 0;
+       irq++, mask <<= 1)
+    {
+      /* Is this interrupt pending? */
+
+      if ((pending & mask) != 0)
+        {
+	  /* Deliver the IRQ */
+
+          irq_dispatch(irq, context);
+          pending &= ~mask;
+        }
+    }
+  return OK;
+}
+
+/********************************************************************************
+ * Public Functions
+ ********************************************************************************/
+
+/********************************************************************************
+ * Name: str7x_xtiinitialize
+ *
+ * Description:
+ *   Configure XTI for operation.  Note that the lines are not used as wake-up
+ *   sources in this implementation.  Some extensions would be required for that
+ *   capability.
+ *
+ ********************************************************************************/
+
+int str7x_xtiinitialize(void)
+{
+  int ret;
+
+  /* Mask all interrupts by setting XTI MRH/L to zero */
+
+  putreg8(0, STR71X_XTI_MRH);
+  putreg8(0, STR71X_XTI_MRL);
+
+  /* Clear any pending interrupts by setting XTI PRH/L to zero */
+
+  putreg8(0, STR71X_XTI_PRH);
+  putreg8(0, STR71X_XTI_PRL);
+
+  /* Attach the XTI interrupt */
+
+  ret = irq_attach(STR71X_IRQ_XTI, str7x_xtiinterrupt);
+  if (ret == OK)
+    {
+      /* Enable the XTI interrupt at the XTI */
+
+      putreg8(STR71X_XTICTRL_ID1S, STR71X_XTI_CTRL);
+
+      /* And enable the XTI interrupt at the interrupt controller */
+
+      up_enable_irq(STR71X_IRQ_XTI);
+    }
+  return ret;
+}
+
+/********************************************************************************
+ * Name: str7x_xticonfig
+ *
+ * Description:
+ *   Configure an external line to provide interrupts.
+ *
+ ********************************************************************************/
+
+int str7x_xticonfig(int irq, bool rising)
+{
+  uint8_t  regval;
+  int bit;
+  int ndx;
+  int ret = -EINVAL;
+
+  /* Configure one of the 16 lines as an interrupt source */
+
+  if (irq > STR71X_IRQ_FIRSTXTI && irq <= NR_IRQS)
+    {
+      /* Decide if we use the lower or upper regiser */
+ 
+      bit = irq - STR71X_IRQ_FIRSTXTI;
+      ndx = 0;
+      if (bit > 7)
+        {
+          /* Select the high register */
+
+          bit  -= 8;
+          ndx  = 1;
+        }
+
+      /* Set the rising or trailing edge */
+
+      regval = getreg8(g_xtiregs[ndx].tr);
+      if (rising)
+        {
+          regval |= (1 << bit);
+        }
+      else
+        {
+          regval &= ~(1 << bit);
+        }
+      putreg8(regval, g_xtiregs[ndx].tr);
+
+      /* Enable the interrupt be setting the corresponding mask bit
+       * the XTI_MRL/H register.
+       */
+
+      regval = getreg8(g_xtiregs[ndx].mr);
+      regval |= (1 << bit);
+      putreg8(regval, g_xtiregs[ndx].mr);
+
+      /* Return success */
+
+      ret = OK;
+    }
+  return ret;
+}
+
+#endif /* CONFIG_STR71X_XTI */
diff --git a/nuttx/arch/arm/src/str71x/str71x_xti.h b/nuttx/arch/arm/src/str71x/str71x_xti.h
index bbe3c46e0..d9458c196 100644
--- a/nuttx/arch/arm/src/str71x/str71x_xti.h
+++ b/nuttx/arch/arm/src/str71x/str71x_xti.h
@@ -1,7 +1,7 @@
 /************************************************************************************

  * arch/arm/src/str71x/str71x_xti.h

  *

- *   Copyright (C) 2008-2009 Gregory Nutt. All rights reserved.

+ *   Copyright (C) 2008-2010 Gregory Nutt. All rights reserved.

  *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>

  *

  * Redistribution and use in source and binary forms, with or without

diff --git a/nuttx/configs/olimex-strp711/nettest/defconfig b/nuttx/configs/olimex-strp711/nettest/defconfig
index 80c48d7ac..256f81665 100755
--- a/nuttx/configs/olimex-strp711/nettest/defconfig
+++ b/nuttx/configs/olimex-strp711/nettest/defconfig
@@ -118,7 +118,7 @@ CONFIG_STR71X_CAN=n
 CONFIG_STR71X_BSPI0=y
 CONFIG_STR71X_BSPI1=n
 CONFIG_STR71X_HDLC=n
-CONFIG_STR71X_XTI=n
+CONFIG_STR71X_XTI=y
 CONFIG_STR71X_GPIO0=y
 CONFIG_STR71X_GPIO1=y
 CONFIG_STR71X_GPIO2=n
diff --git a/nuttx/configs/olimex-strp711/src/up_enc28j60.c b/nuttx/configs/olimex-strp711/src/up_enc28j60.c
index cc285a3dc..8d80e4d34 100755
--- a/nuttx/configs/olimex-strp711/src/up_enc28j60.c
+++ b/nuttx/configs/olimex-strp711/src/up_enc28j60.c
@@ -71,6 +71,7 @@
  * UART3, I2C cannot be used with SPI0.  The GPIOs selected for the ENC28J60
  * interrupt conflict with TMR1.
  */
+#warning "Need to select differnt interrupt pin.. XTI doesn't support this one"
 
 /****************************************************************************
  * Included Files
@@ -90,6 +91,7 @@
 #include "chip.h"
 #include "up_arch.h"
 #include "up_internal.h"
+#include "str71x_internal.h"
 
 #ifdef CONFIG_NET_ENC28J60
 
@@ -105,6 +107,10 @@
 # error "Need CONFIG_STR71X_BSPI0 in the configuration"
 #endif
 
+#ifndef CONFIG_STR71X_XTI
+# error "Need CONFIG_STR71X_XTI in the configuration"
+#endif
+
 /* UART3, I2C cannot be used with SPI0.  The GPIOs selected for the ENC28J60
  * interrupt conflict with TIM1.
  */
@@ -123,7 +129,7 @@
 #define ENC28J60_DEVNO      0 /* Only one ENC28J60 */
 #define ENC28J60_IRQ        0 /* NEEDED!!!!!!!!!!!!!!!! */
 
-/* Debug ********************************************************************/
+#warning "Eventually need to fix XTI IRQ number!"
 
 /****************************************************************************
  * Private Data
@@ -148,34 +154,42 @@ void up_netinitialize(void)
 
   /* Get the SPI port */
 
-  nvdbg("up_netinitialize: Initializing SPI port %d\n", ENC28J60_SPI_PORTNO);
+  nvdbg("Initializing SPI port %d\n", ENC28J60_SPI_PORTNO);
 
   spi = up_spiinitialize(ENC28J60_SPI_PORTNO);
   if (!spi)
     {
-      ndbg("up_netinitialize: Failed to initialize SPI port %d\n",
+      ndbg("Failed to initialize SPI port %d\n",
            ENC28J60_SPI_PORTNO);
       return;
     }
 
-  nvdbg("up_netinitialize: Successfully initialized SPI port %d\n",
+  /* Configure the XTI for the ENC28J60 interrupt.  */
+
+  ret = str7x_xticonfig(ENC28J60_IRQ, false);
+  if (ret < 0)
+    {
+      ndbg("Failed configure interrupt for IRQ %d: %d\n", ENC28J60_IRQ, ret);
+      return;
+    }
+
+  nvdbg("Successfully initialized SPI port %d\n",
         ENC28J60_SPI_PORTNO);
 
   /* Bind the SPI port to the ENC28J60 driver */
 
-  nvdbg("up_netinitialize: Binding SPI port %d to ENC28J60 device %d\n",
+  nvdbg("Binding SPI port %d to ENC28J60 device %d\n",
         ENC28J60_SPI_PORTNO, ENC28J60_DEVNO);
 
-#warning "Need to implement IRQ interrupt before we can use this"
   ret = enc_initialize(spi, ENC28J60_DEVNO, ENC28J60_IRQ);
   if (ret < 0)
     {
-      ndbg("up_netinitialize: Failed to bind SPI port %d ENC28J60 device %d: %d\n",
+      ndbg("Failed to bind SPI port %d ENC28J60 device %d: %d\n",
            ENC28J60_SPI_PORTNO, ENC28J60_DEVNO, ret);
       return;
     }
 
-  nvdbg("up_netinitialize: Successfuly bound SPI port %d ENC28J60 device %d\n",
+  nvdbg("Successfuly bound SPI port %d ENC28J60 device %d\n",
         ENC28J60_SPI_PORTNO, ENC28J60_DEVNO);
 }
 #endif /* CONFIG_NET_ENC28J60 */